drivers/net/irda/Kconfig

   1 menu "Infrared-port device drivers"
   2         depends on IRDA!=n
   3
   4 comment "SIR device drivers"
   5
   6 config IRTTY_SIR
   7         tristate "IrTTY (uses Linux serial driver)"
   8         depends on IRDA
   9         help
  10           Say Y here if you want to build support for the IrTTY line
  11           discipline.  To compile it as a module, choose M here: the module
  12           will be called irtty-sir. IrTTY makes it possible to use Linux's
  13           own serial driver for all IrDA ports that are 16550 compatible.
  14           Most IrDA chips are 16550 compatible so you should probably say Y
  15           to this option.  Using IrTTY will however limit the speed of the
  16           connection to 115200 bps (IrDA SIR mode).
  17
  18           If unsure, say Y.
  19
  20 config BFIN_SIR
  21         tristate "Blackfin SIR on UART"
  22         depends on BLACKFIN && IRDA
  23         default n
  24         help
  25           Say Y here if your want to enable SIR function on Blackfin UART
  26           devices.
  27
  28           To activate this driver you can start irattach like:
  29           "irattach irda0 -s"
  30
  31           Saying M, it will be built as a module named bfin_sir.
  32
  33           Note that you need to turn off one of the serial drivers for SIR
  34           to use that UART.
  35
  36 config BFIN_SIR0
  37         bool "Blackfin SIR on UART0"
  38         depends on BFIN_SIR && !SERIAL_BFIN_UART0
  39
  40 config BFIN_SIR1
  41         bool "Blackfin SIR on UART1"
  42         depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
  43
  44 config BFIN_SIR2
  45         bool "Blackfin SIR on UART2"
  46         depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
  47
  48 config BFIN_SIR3
  49         bool "Blackfin SIR on UART3"
  50         depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
  51
  52 choice
  53         prompt "SIR Mode"
  54         depends on BFIN_SIR
  55         default SIR_BFIN_DMA
  56
  57 config SIR_BFIN_DMA
  58         bool "DMA mode"
  59         depends on !DMA_UNCACHED_NONE
  60
  61 config SIR_BFIN_PIO
  62         bool "PIO mode"
  63 endchoice
  64
  65 comment "Dongle support"
  66
  67 config DONGLE
  68         bool "Serial dongle support"
  69         depends on IRTTY_SIR
  70         help
  71           Say Y here if you have an infrared device that connects to your
  72           computer's serial port. These devices are called dongles. Then say Y
  73           or M to the driver for your particular dongle below.
  74
  75           Note that the answer to this question won't directly affect the
  76           kernel: saying N will just cause the configurator to skip all
  77           the questions about serial dongles.
  78
  79 config ESI_DONGLE
  80         tristate "ESI JetEye PC dongle"
  81         depends on IRTTY_SIR && DONGLE && IRDA
  82         help
  83           Say Y here if you want to build support for the Extended Systems
  84           JetEye PC dongle.  To compile it as a module, choose M here. The ESI
  85           dongle attaches to the normal 9-pin serial port connector, and can
  86           currently only be used by IrTTY.  To activate support for ESI
  87           dongles you will have to start irattach like this:
  88           "irattach -d esi".
  89
  90 config ACTISYS_DONGLE
  91         tristate "ACTiSYS IR-220L and IR220L+ dongle"
  92         depends on IRTTY_SIR && DONGLE && IRDA
  93         help
  94           Say Y here if you want to build support for the ACTiSYS IR-220L and
  95           IR220L+ dongles.  To compile it as a module, choose M here. The
  96           ACTiSYS dongles attaches to the normal 9-pin serial port connector,
  97           and can currently only be used by IrTTY.  To activate support for
  98           ACTiSYS dongles you will have to start irattach like this:
  99           "irattach -d actisys" or "irattach -d actisys+".
 100
 101 config TEKRAM_DONGLE
 102         tristate "Tekram IrMate 210B dongle"
 103         depends on IRTTY_SIR && DONGLE && IRDA
 104         help
 105           Say Y here if you want to build support for the Tekram IrMate 210B
 106           dongle.  To compile it as a module, choose M here. The Tekram dongle
 107           attaches to the normal 9-pin serial port connector, and can
 108           currently only be used by IrTTY.  To activate support for Tekram
 109           dongles you will have to start irattach like this:
 110           "irattach -d tekram".
 111
 112 config TOIM3232_DONGLE
 113         tristate "TOIM3232 IrDa dongle"
 114         depends on IRTTY_SIR && DONGLE && IRDA
 115         help
 116           Say Y here if you want to build support for the Vishay/Temic
 117           TOIM3232 and TOIM4232 based dongles.
 118           To compile it as a module, choose M here.
 119
 120 config LITELINK_DONGLE
 121         tristate "Parallax LiteLink dongle"
 122         depends on IRTTY_SIR && DONGLE && IRDA
 123         help
 124           Say Y here if you want to build support for the Parallax Litelink
 125           dongle.  To compile it as a module, choose M here.  The Parallax
 126           dongle attaches to the normal 9-pin serial port connector, and can
 127           currently only be used by IrTTY.  To activate support for Parallax
 128           dongles you will have to start irattach like this:
 129           "irattach -d litelink".
 130
 131 config MA600_DONGLE
 132         tristate "Mobile Action MA600 dongle"
 133         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 134         help
 135           Say Y here if you want to build support for the Mobile Action MA600
 136           dongle.  To compile it as a module, choose M here. The MA600 dongle
 137           attaches to the normal 9-pin serial port connector, and can
 138           currently only be used by IrTTY.  The driver should also support
 139           the MA620 USB version of the dongle, if the integrated USB-to-RS232
 140           converter is supported by usbserial. To activate support for
 141           MA600 dongle you will have to start irattach like this:
 142           "irattach -d ma600".
 143
 144 config GIRBIL_DONGLE
 145         tristate "Greenwich GIrBIL dongle"
 146         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 147         help
 148           Say Y here if you want to build support for the Greenwich GIrBIL
 149           dongle.  If you want to compile it as a module, choose M here.
 150           The Greenwich dongle attaches to the normal 9-pin serial port
 151           connector, and can currently only be used by IrTTY.  To activate
 152           support for Greenwich dongles you will have to start irattach
 153           like this: "irattach -d girbil".
 154
 155 config MCP2120_DONGLE
 156         tristate "Microchip MCP2120"
 157         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 158         help
 159           Say Y here if you want to build support for the Microchip MCP2120
 160           dongle.  If you want to compile it as a module, choose M here.
 161           The MCP2120 dongle attaches to the normal 9-pin serial port
 162           connector, and can currently only be used by IrTTY.  To activate
 163           support for MCP2120 dongles you will have to start irattach
 164           like this: "irattach -d mcp2120".
 165
 166           You must build this dongle yourself.  For more information see:
 167           <http://www.eyetap.org/~tangf/irda_sir_linux.html>
 168
 169 config OLD_BELKIN_DONGLE
 170         tristate "Old Belkin dongle"
 171         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 172         help
 173           Say Y here if you want to build support for the Adaptec Airport 1000
 174           and 2000 dongles.  If you want to compile it as a module, choose
 175           M here. Some information is contained in the comments
 176           at the top of <file:drivers/net/irda/old_belkin.c>.
 177
 178 config ACT200L_DONGLE
 179         tristate "ACTiSYS IR-200L dongle"
 180         depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 181         help
 182           Say Y here if you want to build support for the ACTiSYS IR-200L
 183           dongle. If you want to compile it as a module, choose M here.
 184           The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
 185           port connector, and can currently only be used by IrTTY.
 186           To activate support for ACTiSYS IR-200L dongle you will have to
 187           start irattach like this: "irattach -d act200l".
 188
 189 config KINGSUN_DONGLE
 190         tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
 191         depends on IRDA && USB && EXPERIMENTAL
 192         help
 193           Say Y or M here if you want to build support for the KingSun/DonShine
 194           DS-620 IrDA-USB bridge device driver.
 195
 196           This USB bridge does not conform to the IrDA-USB device class
 197           specification, and therefore needs its own specific driver. This
 198           dongle supports SIR speed only (9600 bps).
 199
 200           To compile it as a module, choose M here: the module will be called
 201           kingsun-sir.
 202
 203 config EP7211_DONGLE
 204         tristate "EP7211 I/R support"
 205         depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL
 206         help
 207           Say Y here if you want to build support for the Cirrus logic
 208           EP7211 chipset's infrared module.
 209
 210 config KSDAZZLE_DONGLE
 211         tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
 212         depends on IRDA && USB && EXPERIMENTAL
 213         help
 214           Say Y or M here if you want to build support for the KingSun Dazzle
 215           IrDA-USB bridge device driver.
 216
 217           This USB bridge does not conform to the IrDA-USB device class
 218           specification, and therefore needs its own specific driver. This
 219           dongle supports SIR speeds only (9600 through 115200 bps).
 220
 221           To compile it as a module, choose M here: the module will be called
 222           ksdazzle-sir.
 223
 224 config KS959_DONGLE
 225         tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)"
 226         depends on IRDA && USB && EXPERIMENTAL
 227         help
 228           Say Y or M here if you want to build support for the KingSun KS-959
 229           IrDA-USB bridge device driver.
 230
 231           This USB bridge does not conform to the IrDA-USB device class
 232           specification, and therefore needs its own specific driver. This
 233           dongle supports SIR speeds only (9600 through 57600 bps).
 234
 235           To compile it as a module, choose M here: the module will be called
 236           ks959-sir.
 237
 238 comment "FIR device drivers"
 239
 240 config USB_IRDA
 241         tristate "IrDA USB dongles"
 242         depends on IRDA && USB
 243         select FW_LOADER
 244         ---help---
 245           Say Y here if you want to build support for the USB IrDA FIR Dongle
 246           device driver.  To compile it as a module, choose M here: the module
 247           will be called irda-usb.  IrDA-USB support the various IrDA USB
 248           dongles available and most of their peculiarities.  Those dongles
 249           plug in the USB port of your computer, are plug and play, and
 250           support SIR and FIR (4Mbps) speeds.  On the other hand, those
 251           dongles tend to be less efficient than a FIR chipset.
 252
 253           Please note that the driver is still experimental.  And of course,
 254           you will need both USB and IrDA support in your kernel...
 255
 256 config SIGMATEL_FIR
 257         tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
 258         depends on IRDA && USB && EXPERIMENTAL
 259         select CRC32
 260         ---help---
 261           Say Y here if you want to build support for the SigmaTel STIr4200
 262           USB IrDA FIR bridge device driver.
 263
 264           USB bridge based on the SigmaTel STIr4200 don't conform to the
 265           IrDA-USB device class specification, and therefore need their
 266           own specific driver. Those dongles support SIR and FIR (4Mbps)
 267           speeds.
 268
 269           To compile it as a module, choose M here: the module will be called
 270           stir4200.
 271
 272 config NSC_FIR
 273         tristate "NSC PC87108/PC87338"
 274         depends on IRDA && ISA_DMA_API
 275         help
 276           Say Y here if you want to build support for the NSC PC87108 and
 277           PC87338 IrDA chipsets.  This driver supports SIR,
 278           MIR and FIR (4Mbps) speeds.
 279
 280           To compile it as a module, choose M here: the module will be called
 281           nsc-ircc.
 282
 283 config WINBOND_FIR
 284         tristate "Winbond W83977AF (IR)"
 285         depends on IRDA && ISA_DMA_API
 286         help
 287           Say Y here if you want to build IrDA support for the Winbond
 288           W83977AF super-io chipset.  This driver should be used for the IrDA
 289           chipset in the Corel NetWinder.  The driver supports SIR, MIR and
 290           FIR (4Mbps) speeds.
 291
 292           To compile it as a module, choose M here: the module will be called
 293           w83977af_ir.
 294
 295 config TOSHIBA_FIR
 296         tristate "Toshiba Type-O IR Port"
 297         depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
 298         help
 299           Say Y here if you want to build support for the Toshiba Type-O IR
 300           and Donau oboe chipsets. These chipsets are used by the Toshiba
 301           Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
 302           To compile it as a module, choose M here: the module will be called
 303           donauboe.
 304
 305 config AU1000_FIR
 306         tristate "Alchemy Au1000 SIR/FIR"
 307         depends on SOC_AU1000 && IRDA
 308
 309 config SMC_IRCC_FIR
 310         tristate "SMSC IrCC (EXPERIMENTAL)"
 311         depends on EXPERIMENTAL && IRDA && ISA_DMA_API
 312         help
 313           Say Y here if you want to build support for the SMC Infrared
 314           Communications Controller.  It is used in a wide variety of
 315           laptops (Fujitsu, Sony, Compaq and some Toshiba).
 316           To compile it as a module, choose M here: the module will be called
 317           smsc-ircc2.o.
 318
 319 config ALI_FIR
 320         tristate "ALi M5123 FIR (EXPERIMENTAL)"
 321         depends on EXPERIMENTAL && IRDA && ISA_DMA_API
 322         help
 323           Say Y here if you want to build support for the ALi M5123 FIR
 324           Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
 325           M1535, M1535D, M1535+, M1535D South Bridge.  This driver supports
 326           SIR, MIR and FIR (4Mbps) speeds.
 327
 328           To compile it as a module, choose M here: the module will be called
 329           ali-ircc.
 330
 331 config VLSI_FIR
 332         tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
 333         depends on EXPERIMENTAL && IRDA && PCI
 334         help
 335           Say Y here if you want to build support for the VLSI 82C147
 336           PCI-IrDA Controller. This controller is used by the HP OmniBook 800
 337           and 5500 notebooks. The driver provides support for SIR, MIR and
 338           FIR (4Mbps) speeds.
 339
 340           To compile it as a module, choose M here: the module will be called
 341           vlsi_ir.
 342
 343 config SA1100_FIR
 344         tristate "SA1100 Internal IR"
 345         depends on ARCH_SA1100 && IRDA
 346
 347 config VIA_FIR
 348         tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
 349         depends on IRDA && ISA_DMA_API
 350         help
 351           Say Y here if you want to build support for the VIA VT8231
 352           and VIA VT1211 IrDA controllers, found on the motherboards using
 353           those VIA chipsets. To use this controller, you will need
 354           to plug a specific 5 pins FIR IrDA dongle in the specific
 355           motherboard connector. The driver provides support for SIR, MIR
 356           and FIR (4Mbps) speeds.
 357
 358           You will need to specify the 'dongle_id' module parameter to
 359           indicate the FIR dongle attached to the controller.
 360
 361           To compile it as a module, choose M here: the module will be called
 362           via-ircc.
 363
 364 config PXA_FICP
 365         tristate "Intel PXA2xx Internal FICP"
 366         depends on ARCH_PXA && IRDA
 367         help
 368           Say Y or M here if you want to build support for the PXA2xx
 369           built-in IRDA interface which can support both SIR and FIR.
 370           This driver relies on platform specific helper routines so
 371           available capabilities may vary from one PXA2xx target to
 372           another.
 373
 374 config MCS_FIR
 375         tristate "MosChip MCS7780 IrDA-USB dongle"
 376         depends on IRDA && USB && EXPERIMENTAL
 377         select CRC32
 378         help
 379           Say Y or M here if you want to build support for the MosChip
 380           MCS7780 IrDA-USB bridge device driver.
 381
 382           USB bridge based on the MosChip MCS7780 don't conform to the
 383           IrDA-USB device class specification, and therefore need their
 384           own specific driver. Those dongles support SIR and FIR (4Mbps)
 385           speeds.
 386
 387           To compile it as a module, choose M here: the module will be called
 388           mcs7780.
 389
 390 endmenu
 391