drivers/net/ethernet/mellanox/mlxsw/reg.h

   1 /*
   2  * drivers/net/ethernet/mellanox/mlxsw/reg.h
   3  * Copyright (c) 2015 Mellanox Technologies. All rights reserved.
   4  * Copyright (c) 2015 Ido Schimmel <idosch@mellanox.com>
   5  * Copyright (c) 2015 Elad Raz <eladr@mellanox.com>
   6  * Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
   7  *
   8  * Redistribution and use in source and binary forms, with or without
   9  * modification, are permitted provided that the following conditions are met:
  10  *
  11  * 1. Redistributions of source code must retain the above copyright
  12  *    notice, this list of conditions and the following disclaimer.
  13  * 2. Redistributions in binary form must reproduce the above copyright
  14  *    notice, this list of conditions and the following disclaimer in the
  15  *    documentation and/or other materials provided with the distribution.
  16  * 3. Neither the names of the copyright holders nor the names of its
  17  *    contributors may be used to endorse or promote products derived from
  18  *    this software without specific prior written permission.
  19  *
  20  * Alternatively, this software may be distributed under the terms of the
  21  * GNU General Public License ("GPL") version 2 as published by the Free
  22  * Software Foundation.
  23  *
  24  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  25  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  26  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  27  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
  28  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  29  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  30  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  31  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  32  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  33  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  34  * POSSIBILITY OF SUCH DAMAGE.
  35  */
  36
  37 #ifndef _MLXSW_REG_H
  38 #define _MLXSW_REG_H
  39
  40 #include <linux/string.h>
  41 #include <linux/bitops.h>
  42 #include <linux/if_vlan.h>
  43
  44 #include "item.h"
  45 #include "port.h"
  46
  47 struct mlxsw_reg_info {
  48         u16 id;
  49         u16 len; /* In u8 */
  50 };
  51
  52 #define MLXSW_REG(type) (&mlxsw_reg_##type)
  53 #define MLXSW_REG_LEN(type) MLXSW_REG(type)->len
  54 #define MLXSW_REG_ZERO(type, payload) memset(payload, 0, MLXSW_REG(type)->len)
  55
  56 /* SGCR - Switch General Configuration Register
  57  * --------------------------------------------
  58  * This register is used for configuration of the switch capabilities.
  59  */
  60 #define MLXSW_REG_SGCR_ID 0x2000
  61 #define MLXSW_REG_SGCR_LEN 0x10
  62
  63 static const struct mlxsw_reg_info mlxsw_reg_sgcr = {
  64         .id = MLXSW_REG_SGCR_ID,
  65         .len = MLXSW_REG_SGCR_LEN,
  66 };
  67
  68 /* reg_sgcr_llb
  69  * Link Local Broadcast (Default=0)
  70  * When set, all Link Local packets (224.0.0.X) will be treated as broadcast
  71  * packets and ignore the IGMP snooping entries.
  72  * Access: RW
  73  */
  74 MLXSW_ITEM32(reg, sgcr, llb, 0x04, 0, 1);
  75
  76 static inline void mlxsw_reg_sgcr_pack(char *payload, bool llb)
  77 {
  78         MLXSW_REG_ZERO(sgcr, payload);
  79         mlxsw_reg_sgcr_llb_set(payload, !!llb);
  80 }
  81
  82 /* SPAD - Switch Physical Address Register
  83  * ---------------------------------------
  84  * The SPAD register configures the switch physical MAC address.
  85  */
  86 #define MLXSW_REG_SPAD_ID 0x2002
  87 #define MLXSW_REG_SPAD_LEN 0x10
  88
  89 static const struct mlxsw_reg_info mlxsw_reg_spad = {
  90         .id = MLXSW_REG_SPAD_ID,
  91         .len = MLXSW_REG_SPAD_LEN,
  92 };
  93
  94 /* reg_spad_base_mac
  95  * Base MAC address for the switch partitions.
  96  * Per switch partition MAC address is equal to:
  97  * base_mac + swid
  98  * Access: RW
  99  */
 100 MLXSW_ITEM_BUF(reg, spad, base_mac, 0x02, 6);
 101
 102 /* SSPR - Switch System Port Record Register
 103  * -----------------------------------------
 104  * Configures the system port to local port mapping.
 105  */
 106 #define MLXSW_REG_SSPR_ID 0x2008
 107 #define MLXSW_REG_SSPR_LEN 0x8
 108
 109 static const struct mlxsw_reg_info mlxsw_reg_sspr = {
 110         .id = MLXSW_REG_SSPR_ID,
 111         .len = MLXSW_REG_SSPR_LEN,
 112 };
 113
 114 /* reg_sspr_m
 115  * Master - if set, then the record describes the master system port.
 116  * This is needed in case a local port is mapped into several system ports
 117  * (for multipathing). That number will be reported as the source system
 118  * port when packets are forwarded to the CPU. Only one master port is allowed
 119  * per local port.
 120  *
 121  * Note: Must be set for Spectrum.
 122  * Access: RW
 123  */
 124 MLXSW_ITEM32(reg, sspr, m, 0x00, 31, 1);
 125
 126 /* reg_sspr_local_port
 127  * Local port number.
 128  *
 129  * Access: RW
 130  */
 131 MLXSW_ITEM32(reg, sspr, local_port, 0x00, 16, 8);
 132
 133 /* reg_sspr_sub_port
 134  * Virtual port within the physical port.
 135  * Should be set to 0 when virtual ports are not enabled on the port.
 136  *
 137  * Access: RW
 138  */
 139 MLXSW_ITEM32(reg, sspr, sub_port, 0x00, 8, 8);
 140
 141 /* reg_sspr_system_port
 142  * Unique identifier within the stacking domain that represents all the ports
 143  * that are available in the system (external ports).
 144  *
 145  * Currently, only single-ASIC configurations are supported, so we default to
 146  * 1:1 mapping between system ports and local ports.
 147  * Access: Index
 148  */
 149 MLXSW_ITEM32(reg, sspr, system_port, 0x04, 0, 16);
 150
 151 static inline void mlxsw_reg_sspr_pack(char *payload, u8 local_port)
 152 {
 153         MLXSW_REG_ZERO(sspr, payload);
 154         mlxsw_reg_sspr_m_set(payload, 1);
 155         mlxsw_reg_sspr_local_port_set(payload, local_port);
 156         mlxsw_reg_sspr_sub_port_set(payload, 0);
 157         mlxsw_reg_sspr_system_port_set(payload, local_port);
 158 }
 159
 160 /* SFDAT - Switch Filtering Database Aging Time
 161  * --------------------------------------------
 162  * Controls the Switch aging time. Aging time is able to be set per Switch
 163  * Partition.
 164  */
 165 #define MLXSW_REG_SFDAT_ID 0x2009
 166 #define MLXSW_REG_SFDAT_LEN 0x8
 167
 168 static const struct mlxsw_reg_info mlxsw_reg_sfdat = {
 169         .id = MLXSW_REG_SFDAT_ID,
 170         .len = MLXSW_REG_SFDAT_LEN,
 171 };
 172
 173 /* reg_sfdat_swid
 174  * Switch partition ID.
 175  * Access: Index
 176  */
 177 MLXSW_ITEM32(reg, sfdat, swid, 0x00, 24, 8);
 178
 179 /* reg_sfdat_age_time
 180  * Aging time in seconds
 181  * Min - 10 seconds
 182  * Max - 1,000,000 seconds
 183  * Default is 300 seconds.
 184  * Access: RW
 185  */
 186 MLXSW_ITEM32(reg, sfdat, age_time, 0x04, 0, 20);
 187
 188 static inline void mlxsw_reg_sfdat_pack(char *payload, u32 age_time)
 189 {
 190         MLXSW_REG_ZERO(sfdat, payload);
 191         mlxsw_reg_sfdat_swid_set(payload, 0);
 192         mlxsw_reg_sfdat_age_time_set(payload, age_time);
 193 }
 194
 195 /* SFD - Switch Filtering Database
 196  * -------------------------------
 197  * The following register defines the access to the filtering database.
 198  * The register supports querying, adding, removing and modifying the database.
 199  * The access is optimized for bulk updates in which case more than one
 200  * FDB record is present in the same command.
 201  */
 202 #define MLXSW_REG_SFD_ID 0x200A
 203 #define MLXSW_REG_SFD_BASE_LEN 0x10 /* base length, without records */
 204 #define MLXSW_REG_SFD_REC_LEN 0x10 /* record length */
 205 #define MLXSW_REG_SFD_REC_MAX_COUNT 64
 206 #define MLXSW_REG_SFD_LEN (MLXSW_REG_SFD_BASE_LEN +     \
 207                            MLXSW_REG_SFD_REC_LEN * MLXSW_REG_SFD_REC_MAX_COUNT)
 208
 209 static const struct mlxsw_reg_info mlxsw_reg_sfd = {
 210         .id = MLXSW_REG_SFD_ID,
 211         .len = MLXSW_REG_SFD_LEN,
 212 };
 213
 214 /* reg_sfd_swid
 215  * Switch partition ID for queries. Reserved on Write.
 216  * Access: Index
 217  */
 218 MLXSW_ITEM32(reg, sfd, swid, 0x00, 24, 8);
 219
 220 enum mlxsw_reg_sfd_op {
 221         /* Dump entire FDB a (process according to record_locator) */
 222         MLXSW_REG_SFD_OP_QUERY_DUMP = 0,
 223         /* Query records by {MAC, VID/FID} value */
 224         MLXSW_REG_SFD_OP_QUERY_QUERY = 1,
 225         /* Query and clear activity. Query records by {MAC, VID/FID} value */
 226         MLXSW_REG_SFD_OP_QUERY_QUERY_AND_CLEAR_ACTIVITY = 2,
 227         /* Test. Response indicates if each of the records could be
 228          * added to the FDB.
 229          */
 230         MLXSW_REG_SFD_OP_WRITE_TEST = 0,
 231         /* Add/modify. Aged-out records cannot be added. This command removes
 232          * the learning notification of the {MAC, VID/FID}. Response includes
 233          * the entries that were added to the FDB.
 234          */
 235         MLXSW_REG_SFD_OP_WRITE_EDIT = 1,
 236         /* Remove record by {MAC, VID/FID}. This command also removes
 237          * the learning notification and aged-out notifications
 238          * of the {MAC, VID/FID}. The response provides current (pre-removal)
 239          * entries as non-aged-out.
 240          */
 241         MLXSW_REG_SFD_OP_WRITE_REMOVE = 2,
 242         /* Remove learned notification by {MAC, VID/FID}. The response provides
 243          * the removed learning notification.
 244          */
 245         MLXSW_REG_SFD_OP_WRITE_REMOVE_NOTIFICATION = 2,
 246 };
 247
 248 /* reg_sfd_op
 249  * Operation.
 250  * Access: OP
 251  */
 252 MLXSW_ITEM32(reg, sfd, op, 0x04, 30, 2);
 253
 254 /* reg_sfd_record_locator
 255  * Used for querying the FDB. Use record_locator=0 to initiate the
 256  * query. When a record is returned, a new record_locator is
 257  * returned to be used in the subsequent query.
 258  * Reserved for database update.
 259  * Access: Index
 260  */
 261 MLXSW_ITEM32(reg, sfd, record_locator, 0x04, 0, 30);
 262
 263 /* reg_sfd_num_rec
 264  * Request: Number of records to read/add/modify/remove
 265  * Response: Number of records read/added/replaced/removed
 266  * See above description for more details.
 267  * Ranges 0..64
 268  * Access: RW
 269  */
 270 MLXSW_ITEM32(reg, sfd, num_rec, 0x08, 0, 8);
 271
 272 static inline void mlxsw_reg_sfd_pack(char *payload, enum mlxsw_reg_sfd_op op,
 273                                       u32 record_locator)
 274 {
 275         MLXSW_REG_ZERO(sfd, payload);
 276         mlxsw_reg_sfd_op_set(payload, op);
 277         mlxsw_reg_sfd_record_locator_set(payload, record_locator);
 278 }
 279
 280 /* reg_sfd_rec_swid
 281  * Switch partition ID.
 282  * Access: Index
 283  */
 284 MLXSW_ITEM32_INDEXED(reg, sfd, rec_swid, MLXSW_REG_SFD_BASE_LEN, 24, 8,
 285                      MLXSW_REG_SFD_REC_LEN, 0x00, false);
 286
 287 enum mlxsw_reg_sfd_rec_type {
 288         MLXSW_REG_SFD_REC_TYPE_UNICAST = 0x0,
 289 };
 290
 291 /* reg_sfd_rec_type
 292  * FDB record type.
 293  * Access: RW
 294  */
 295 MLXSW_ITEM32_INDEXED(reg, sfd, rec_type, MLXSW_REG_SFD_BASE_LEN, 20, 4,
 296                      MLXSW_REG_SFD_REC_LEN, 0x00, false);
 297
 298 enum mlxsw_reg_sfd_rec_policy {
 299         /* Replacement disabled, aging disabled. */
 300         MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY = 0,
 301         /* (mlag remote): Replacement enabled, aging disabled,
 302          * learning notification enabled on this port.
 303          */
 304         MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_MLAG = 1,
 305         /* (ingress device): Replacement enabled, aging enabled. */
 306         MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_INGRESS = 3,
 307 };
 308
 309 /* reg_sfd_rec_policy
 310  * Policy.
 311  * Access: RW
 312  */
 313 MLXSW_ITEM32_INDEXED(reg, sfd, rec_policy, MLXSW_REG_SFD_BASE_LEN, 18, 2,
 314                      MLXSW_REG_SFD_REC_LEN, 0x00, false);
 315
 316 /* reg_sfd_rec_a
 317  * Activity. Set for new static entries. Set for static entries if a frame SMAC
 318  * lookup hits on the entry.
 319  * To clear the a bit, use "query and clear activity" op.
 320  * Access: RO
 321  */
 322 MLXSW_ITEM32_INDEXED(reg, sfd, rec_a, MLXSW_REG_SFD_BASE_LEN, 16, 1,
 323                      MLXSW_REG_SFD_REC_LEN, 0x00, false);
 324
 325 /* reg_sfd_rec_mac
 326  * MAC address.
 327  * Access: Index
 328  */
 329 MLXSW_ITEM_BUF_INDEXED(reg, sfd, rec_mac, MLXSW_REG_SFD_BASE_LEN, 6,
 330                        MLXSW_REG_SFD_REC_LEN, 0x02);
 331
 332 enum mlxsw_reg_sfd_rec_action {
 333         /* forward */
 334         MLXSW_REG_SFD_REC_ACTION_NOP = 0,
 335         /* forward and trap, trap_id is FDB_TRAP */
 336         MLXSW_REG_SFD_REC_ACTION_MIRROR_TO_CPU = 1,
 337         /* trap and do not forward, trap_id is FDB_TRAP */
 338         MLXSW_REG_SFD_REC_ACTION_TRAP = 3,
 339         MLXSW_REG_SFD_REC_ACTION_DISCARD_ERROR = 15,
 340 };
 341
 342 /* reg_sfd_rec_action
 343  * Action to apply on the packet.
 344  * Note: Dynamic entries can only be configured with NOP action.
 345  * Access: RW
 346  */
 347 MLXSW_ITEM32_INDEXED(reg, sfd, rec_action, MLXSW_REG_SFD_BASE_LEN, 28, 4,
 348                      MLXSW_REG_SFD_REC_LEN, 0x0C, false);
 349
 350 /* reg_sfd_uc_sub_port
 351  * VEPA channel on local port.
 352  * Valid only if local port is a non-stacking port. Must be 0 if multichannel
 353  * VEPA is not enabled.
 354  * Access: RW
 355  */
 356 MLXSW_ITEM32_INDEXED(reg, sfd, uc_sub_port, MLXSW_REG_SFD_BASE_LEN, 16, 8,
 357                      MLXSW_REG_SFD_REC_LEN, 0x08, false);
 358
 359 /* reg_sfd_uc_fid_vid
 360  * Filtering ID or VLAN ID
 361  * For SwitchX and SwitchX-2:
 362  * - Dynamic entries (policy 2,3) use FID
 363  * - Static entries (policy 0) use VID
 364  * - When independent learning is configured, VID=FID
 365  * For Spectrum: use FID for both Dynamic and Static entries.
 366  * VID should not be used.
 367  * Access: Index
 368  */
 369 MLXSW_ITEM32_INDEXED(reg, sfd, uc_fid_vid, MLXSW_REG_SFD_BASE_LEN, 0, 16,
 370                      MLXSW_REG_SFD_REC_LEN, 0x08, false);
 371
 372 /* reg_sfd_uc_system_port
 373  * Unique port identifier for the final destination of the packet.
 374  * Access: RW
 375  */
 376 MLXSW_ITEM32_INDEXED(reg, sfd, uc_system_port, MLXSW_REG_SFD_BASE_LEN, 0, 16,
 377                      MLXSW_REG_SFD_REC_LEN, 0x0C, false);
 378
 379 static inline void mlxsw_reg_sfd_uc_pack(char *payload, int rec_index,
 380                                          enum mlxsw_reg_sfd_rec_policy policy,
 381                                          const char *mac, u16 vid,
 382                                          enum mlxsw_reg_sfd_rec_action action,
 383                                          u8 local_port)
 384 {
 385         u8 num_rec = mlxsw_reg_sfd_num_rec_get(payload);
 386
 387         if (rec_index >= num_rec)
 388                 mlxsw_reg_sfd_num_rec_set(payload, rec_index + 1);
 389         mlxsw_reg_sfd_rec_swid_set(payload, rec_index, 0);
 390         mlxsw_reg_sfd_rec_type_set(payload, rec_index,
 391                                    MLXSW_REG_SFD_REC_TYPE_UNICAST);
 392         mlxsw_reg_sfd_rec_policy_set(payload, rec_index, policy);
 393         mlxsw_reg_sfd_rec_mac_memcpy_to(payload, rec_index, mac);
 394         mlxsw_reg_sfd_uc_sub_port_set(payload, rec_index, 0);
 395         mlxsw_reg_sfd_uc_fid_vid_set(payload, rec_index, vid);
 396         mlxsw_reg_sfd_rec_action_set(payload, rec_index, action);
 397         mlxsw_reg_sfd_uc_system_port_set(payload, rec_index, local_port);
 398 }
 399
 400 static inline void mlxsw_reg_sfd_uc_unpack(char *payload, int rec_index,
 401                                            char *mac, u16 *p_vid,
 402                                            u8 *p_local_port)
 403 {
 404         mlxsw_reg_sfd_rec_mac_memcpy_from(payload, rec_index, mac);
 405         *p_vid = mlxsw_reg_sfd_uc_fid_vid_get(payload, rec_index);
 406         *p_local_port = mlxsw_reg_sfd_uc_system_port_get(payload, rec_index);
 407 }
 408
 409 /* SFN - Switch FDB Notification Register
 410  * -------------------------------------------
 411  * The switch provides notifications on newly learned FDB entries and
 412  * aged out entries. The notifications can be polled by software.
 413  */
 414 #define MLXSW_REG_SFN_ID 0x200B
 415 #define MLXSW_REG_SFN_BASE_LEN 0x10 /* base length, without records */
 416 #define MLXSW_REG_SFN_REC_LEN 0x10 /* record length */
 417 #define MLXSW_REG_SFN_REC_MAX_COUNT 64
 418 #define MLXSW_REG_SFN_LEN (MLXSW_REG_SFN_BASE_LEN +     \
 419                            MLXSW_REG_SFN_REC_LEN * MLXSW_REG_SFN_REC_MAX_COUNT)
 420
 421 static const struct mlxsw_reg_info mlxsw_reg_sfn = {
 422         .id = MLXSW_REG_SFN_ID,
 423         .len = MLXSW_REG_SFN_LEN,
 424 };
 425
 426 /* reg_sfn_swid
 427  * Switch partition ID.
 428  * Access: Index
 429  */
 430 MLXSW_ITEM32(reg, sfn, swid, 0x00, 24, 8);
 431
 432 /* reg_sfn_num_rec
 433  * Request: Number of learned notifications and aged-out notification
 434  * records requested.
 435  * Response: Number of notification records returned (must be smaller
 436  * than or equal to the value requested)
 437  * Ranges 0..64
 438  * Access: OP
 439  */
 440 MLXSW_ITEM32(reg, sfn, num_rec, 0x04, 0, 8);
 441
 442 static inline void mlxsw_reg_sfn_pack(char *payload)
 443 {
 444         MLXSW_REG_ZERO(sfn, payload);
 445         mlxsw_reg_sfn_swid_set(payload, 0);
 446         mlxsw_reg_sfn_num_rec_set(payload, MLXSW_REG_SFN_REC_MAX_COUNT);
 447 }
 448
 449 /* reg_sfn_rec_swid
 450  * Switch partition ID.
 451  * Access: RO
 452  */
 453 MLXSW_ITEM32_INDEXED(reg, sfn, rec_swid, MLXSW_REG_SFN_BASE_LEN, 24, 8,
 454                      MLXSW_REG_SFN_REC_LEN, 0x00, false);
 455
 456 enum mlxsw_reg_sfn_rec_type {
 457         /* MAC addresses learned on a regular port. */
 458         MLXSW_REG_SFN_REC_TYPE_LEARNED_MAC = 0x5,
 459         /* Aged-out MAC address on a regular port */
 460         MLXSW_REG_SFN_REC_TYPE_AGED_OUT_MAC = 0x7,
 461 };
 462
 463 /* reg_sfn_rec_type
 464  * Notification record type.
 465  * Access: RO
 466  */
 467 MLXSW_ITEM32_INDEXED(reg, sfn, rec_type, MLXSW_REG_SFN_BASE_LEN, 20, 4,
 468                      MLXSW_REG_SFN_REC_LEN, 0x00, false);
 469
 470 /* reg_sfn_rec_mac
 471  * MAC address.
 472  * Access: RO
 473  */
 474 MLXSW_ITEM_BUF_INDEXED(reg, sfn, rec_mac, MLXSW_REG_SFN_BASE_LEN, 6,
 475                        MLXSW_REG_SFN_REC_LEN, 0x02);
 476
 477 /* reg_sfn_mac_sub_port
 478  * VEPA channel on the local port.
 479  * 0 if multichannel VEPA is not enabled.
 480  * Access: RO
 481  */
 482 MLXSW_ITEM32_INDEXED(reg, sfn, mac_sub_port, MLXSW_REG_SFN_BASE_LEN, 16, 8,
 483                      MLXSW_REG_SFN_REC_LEN, 0x08, false);
 484
 485 /* reg_sfn_mac_fid
 486  * Filtering identifier.
 487  * Access: RO
 488  */
 489 MLXSW_ITEM32_INDEXED(reg, sfn, mac_fid, MLXSW_REG_SFN_BASE_LEN, 0, 16,
 490                      MLXSW_REG_SFN_REC_LEN, 0x08, false);
 491
 492 /* reg_sfn_mac_system_port
 493  * Unique port identifier for the final destination of the packet.
 494  * Access: RO
 495  */
 496 MLXSW_ITEM32_INDEXED(reg, sfn, mac_system_port, MLXSW_REG_SFN_BASE_LEN, 0, 16,
 497                      MLXSW_REG_SFN_REC_LEN, 0x0C, false);
 498
 499 static inline void mlxsw_reg_sfn_mac_unpack(char *payload, int rec_index,
 500                                             char *mac, u16 *p_vid,
 501                                             u8 *p_local_port)
 502 {
 503         mlxsw_reg_sfn_rec_mac_memcpy_from(payload, rec_index, mac);
 504         *p_vid = mlxsw_reg_sfn_mac_fid_get(payload, rec_index);
 505         *p_local_port = mlxsw_reg_sfn_mac_system_port_get(payload, rec_index);
 506 }
 507
 508 /* SPMS - Switch Port MSTP/RSTP State Register
 509  * -------------------------------------------
 510  * Configures the spanning tree state of a physical port.
 511  */
 512 #define MLXSW_REG_SPMS_ID 0x200D
 513 #define MLXSW_REG_SPMS_LEN 0x404
 514
 515 static const struct mlxsw_reg_info mlxsw_reg_spms = {
 516         .id = MLXSW_REG_SPMS_ID,
 517         .len = MLXSW_REG_SPMS_LEN,
 518 };
 519
 520 /* reg_spms_local_port
 521  * Local port number.
 522  * Access: Index
 523  */
 524 MLXSW_ITEM32(reg, spms, local_port, 0x00, 16, 8);
 525
 526 enum mlxsw_reg_spms_state {
 527         MLXSW_REG_SPMS_STATE_NO_CHANGE,
 528         MLXSW_REG_SPMS_STATE_DISCARDING,
 529         MLXSW_REG_SPMS_STATE_LEARNING,
 530         MLXSW_REG_SPMS_STATE_FORWARDING,
 531 };
 532
 533 /* reg_spms_state
 534  * Spanning tree state of each VLAN ID (VID) of the local port.
 535  * 0 - Do not change spanning tree state (used only when writing).
 536  * 1 - Discarding. No learning or forwarding to/from this port (default).
 537  * 2 - Learning. Port is learning, but not forwarding.
 538  * 3 - Forwarding. Port is learning and forwarding.
 539  * Access: RW
 540  */
 541 MLXSW_ITEM_BIT_ARRAY(reg, spms, state, 0x04, 0x400, 2);
 542
 543 static inline void mlxsw_reg_spms_pack(char *payload, u8 local_port)
 544 {
 545         MLXSW_REG_ZERO(spms, payload);
 546         mlxsw_reg_spms_local_port_set(payload, local_port);
 547 }
 548
 549 static inline void mlxsw_reg_spms_vid_pack(char *payload, u16 vid,
 550                                            enum mlxsw_reg_spms_state state)
 551 {
 552         mlxsw_reg_spms_state_set(payload, vid, state);
 553 }
 554
 555 /* SPVID - Switch Port VID
 556  * -----------------------
 557  * The switch port VID configures the default VID for a port.
 558  */
 559 #define MLXSW_REG_SPVID_ID 0x200E
 560 #define MLXSW_REG_SPVID_LEN 0x08
 561
 562 static const struct mlxsw_reg_info mlxsw_reg_spvid = {
 563         .id = MLXSW_REG_SPVID_ID,
 564         .len = MLXSW_REG_SPVID_LEN,
 565 };
 566
 567 /* reg_spvid_local_port
 568  * Local port number.
 569  * Access: Index
 570  */
 571 MLXSW_ITEM32(reg, spvid, local_port, 0x00, 16, 8);
 572
 573 /* reg_spvid_sub_port
 574  * Virtual port within the physical port.
 575  * Should be set to 0 when virtual ports are not enabled on the port.
 576  * Access: Index
 577  */
 578 MLXSW_ITEM32(reg, spvid, sub_port, 0x00, 8, 8);
 579
 580 /* reg_spvid_pvid
 581  * Port default VID
 582  * Access: RW
 583  */
 584 MLXSW_ITEM32(reg, spvid, pvid, 0x04, 0, 12);
 585
 586 static inline void mlxsw_reg_spvid_pack(char *payload, u8 local_port, u16 pvid)
 587 {
 588         MLXSW_REG_ZERO(spvid, payload);
 589         mlxsw_reg_spvid_local_port_set(payload, local_port);
 590         mlxsw_reg_spvid_pvid_set(payload, pvid);
 591 }
 592
 593 /* SPVM - Switch Port VLAN Membership
 594  * ----------------------------------
 595  * The Switch Port VLAN Membership register configures the VLAN membership
 596  * of a port in a VLAN denoted by VID. VLAN membership is managed per
 597  * virtual port. The register can be used to add and remove VID(s) from a port.
 598  */
 599 #define MLXSW_REG_SPVM_ID 0x200F
 600 #define MLXSW_REG_SPVM_BASE_LEN 0x04 /* base length, without records */
 601 #define MLXSW_REG_SPVM_REC_LEN 0x04 /* record length */
 602 #define MLXSW_REG_SPVM_REC_MAX_COUNT 255
 603 #define MLXSW_REG_SPVM_LEN (MLXSW_REG_SPVM_BASE_LEN +   \
 604                     MLXSW_REG_SPVM_REC_LEN * MLXSW_REG_SPVM_REC_MAX_COUNT)
 605
 606 static const struct mlxsw_reg_info mlxsw_reg_spvm = {
 607         .id = MLXSW_REG_SPVM_ID,
 608         .len = MLXSW_REG_SPVM_LEN,
 609 };
 610
 611 /* reg_spvm_pt
 612  * Priority tagged. If this bit is set, packets forwarded to the port with
 613  * untagged VLAN membership (u bit is set) will be tagged with priority tag
 614  * (VID=0)
 615  * Access: RW
 616  */
 617 MLXSW_ITEM32(reg, spvm, pt, 0x00, 31, 1);
 618
 619 /* reg_spvm_pte
 620  * Priority Tagged Update Enable. On Write operations, if this bit is cleared,
 621  * the pt bit will NOT be updated. To update the pt bit, pte must be set.
 622  * Access: WO
 623  */
 624 MLXSW_ITEM32(reg, spvm, pte, 0x00, 30, 1);
 625
 626 /* reg_spvm_local_port
 627  * Local port number.
 628  * Access: Index
 629  */
 630 MLXSW_ITEM32(reg, spvm, local_port, 0x00, 16, 8);
 631
 632 /* reg_spvm_sub_port
 633  * Virtual port within the physical port.
 634  * Should be set to 0 when virtual ports are not enabled on the port.
 635  * Access: Index
 636  */
 637 MLXSW_ITEM32(reg, spvm, sub_port, 0x00, 8, 8);
 638
 639 /* reg_spvm_num_rec
 640  * Number of records to update. Each record contains: i, e, u, vid.
 641  * Access: OP
 642  */
 643 MLXSW_ITEM32(reg, spvm, num_rec, 0x00, 0, 8);
 644
 645 /* reg_spvm_rec_i
 646  * Ingress membership in VLAN ID.
 647  * Access: Index
 648  */
 649 MLXSW_ITEM32_INDEXED(reg, spvm, rec_i,
 650                      MLXSW_REG_SPVM_BASE_LEN, 14, 1,
 651                      MLXSW_REG_SPVM_REC_LEN, 0, false);
 652
 653 /* reg_spvm_rec_e
 654  * Egress membership in VLAN ID.
 655  * Access: Index
 656  */
 657 MLXSW_ITEM32_INDEXED(reg, spvm, rec_e,
 658                      MLXSW_REG_SPVM_BASE_LEN, 13, 1,
 659                      MLXSW_REG_SPVM_REC_LEN, 0, false);
 660
 661 /* reg_spvm_rec_u
 662  * Untagged - port is an untagged member - egress transmission uses untagged
 663  * frames on VID<n>
 664  * Access: Index
 665  */
 666 MLXSW_ITEM32_INDEXED(reg, spvm, rec_u,
 667                      MLXSW_REG_SPVM_BASE_LEN, 12, 1,
 668                      MLXSW_REG_SPVM_REC_LEN, 0, false);
 669
 670 /* reg_spvm_rec_vid
 671  * Egress membership in VLAN ID.
 672  * Access: Index
 673  */
 674 MLXSW_ITEM32_INDEXED(reg, spvm, rec_vid,
 675                      MLXSW_REG_SPVM_BASE_LEN, 0, 12,
 676                      MLXSW_REG_SPVM_REC_LEN, 0, false);
 677
 678 static inline void mlxsw_reg_spvm_pack(char *payload, u8 local_port,
 679                                        u16 vid_begin, u16 vid_end,
 680                                        bool is_member, bool untagged)
 681 {
 682         int size = vid_end - vid_begin + 1;
 683         int i;
 684
 685         MLXSW_REG_ZERO(spvm, payload);
 686         mlxsw_reg_spvm_local_port_set(payload, local_port);
 687         mlxsw_reg_spvm_num_rec_set(payload, size);
 688
 689         for (i = 0; i < size; i++) {
 690                 mlxsw_reg_spvm_rec_i_set(payload, i, is_member);
 691                 mlxsw_reg_spvm_rec_e_set(payload, i, is_member);
 692                 mlxsw_reg_spvm_rec_u_set(payload, i, untagged);
 693                 mlxsw_reg_spvm_rec_vid_set(payload, i, vid_begin + i);
 694         }
 695 }
 696
 697 /* SFGC - Switch Flooding Group Configuration
 698  * ------------------------------------------
 699  * The following register controls the association of flooding tables and MIDs
 700  * to packet types used for flooding.
 701  */
 702 #define MLXSW_REG_SFGC_ID 0x2011
 703 #define MLXSW_REG_SFGC_LEN 0x10
 704
 705 static const struct mlxsw_reg_info mlxsw_reg_sfgc = {
 706         .id = MLXSW_REG_SFGC_ID,
 707         .len = MLXSW_REG_SFGC_LEN,
 708 };
 709
 710 enum mlxsw_reg_sfgc_type {
 711         MLXSW_REG_SFGC_TYPE_BROADCAST,
 712         MLXSW_REG_SFGC_TYPE_UNKNOWN_UNICAST,
 713         MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV4,
 714         MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_IPV6,
 715         MLXSW_REG_SFGC_TYPE_RESERVED,
 716         MLXSW_REG_SFGC_TYPE_UNREGISTERED_MULTICAST_NON_IP,
 717         MLXSW_REG_SFGC_TYPE_IPV4_LINK_LOCAL,
 718         MLXSW_REG_SFGC_TYPE_IPV6_ALL_HOST,
 719         MLXSW_REG_SFGC_TYPE_MAX,
 720 };
 721
 722 /* reg_sfgc_type
 723  * The traffic type to reach the flooding table.
 724  * Access: Index
 725  */
 726 MLXSW_ITEM32(reg, sfgc, type, 0x00, 0, 4);
 727
 728 enum mlxsw_reg_sfgc_bridge_type {
 729         MLXSW_REG_SFGC_BRIDGE_TYPE_1Q_FID = 0,
 730         MLXSW_REG_SFGC_BRIDGE_TYPE_VFID = 1,
 731 };
 732
 733 /* reg_sfgc_bridge_type
 734  * Access: Index
 735  *
 736  * Note: SwitchX-2 only supports 802.1Q mode.
 737  */
 738 MLXSW_ITEM32(reg, sfgc, bridge_type, 0x04, 24, 3);
 739
 740 enum mlxsw_flood_table_type {
 741         MLXSW_REG_SFGC_TABLE_TYPE_VID = 1,
 742         MLXSW_REG_SFGC_TABLE_TYPE_SINGLE = 2,
 743         MLXSW_REG_SFGC_TABLE_TYPE_ANY = 0,
 744         MLXSW_REG_SFGC_TABLE_TYPE_FID_OFFEST = 3,
 745         MLXSW_REG_SFGC_TABLE_TYPE_FID = 4,
 746 };
 747
 748 /* reg_sfgc_table_type
 749  * See mlxsw_flood_table_type
 750  * Access: RW
 751  *
 752  * Note: FID offset and FID types are not supported in SwitchX-2.
 753  */
 754 MLXSW_ITEM32(reg, sfgc, table_type, 0x04, 16, 3);
 755
 756 /* reg_sfgc_flood_table
 757  * Flooding table index to associate with the specific type on the specific
 758  * switch partition.
 759  * Access: RW
 760  */
 761 MLXSW_ITEM32(reg, sfgc, flood_table, 0x04, 0, 6);
 762
 763 /* reg_sfgc_mid
 764  * The multicast ID for the swid. Not supported for Spectrum
 765  * Access: RW
 766  */
 767 MLXSW_ITEM32(reg, sfgc, mid, 0x08, 0, 16);
 768
 769 /* reg_sfgc_counter_set_type
 770  * Counter Set Type for flow counters.
 771  * Access: RW
 772  */
 773 MLXSW_ITEM32(reg, sfgc, counter_set_type, 0x0C, 24, 8);
 774
 775 /* reg_sfgc_counter_index
 776  * Counter Index for flow counters.
 777  * Access: RW
 778  */
 779 MLXSW_ITEM32(reg, sfgc, counter_index, 0x0C, 0, 24);
 780
 781 static inline void
 782 mlxsw_reg_sfgc_pack(char *payload, enum mlxsw_reg_sfgc_type type,
 783                     enum mlxsw_reg_sfgc_bridge_type bridge_type,
 784                     enum mlxsw_flood_table_type table_type,
 785                     unsigned int flood_table)
 786 {
 787         MLXSW_REG_ZERO(sfgc, payload);
 788         mlxsw_reg_sfgc_type_set(payload, type);
 789         mlxsw_reg_sfgc_bridge_type_set(payload, bridge_type);
 790         mlxsw_reg_sfgc_table_type_set(payload, table_type);
 791         mlxsw_reg_sfgc_flood_table_set(payload, flood_table);
 792         mlxsw_reg_sfgc_mid_set(payload, MLXSW_PORT_MID);
 793 }
 794
 795 /* SFTR - Switch Flooding Table Register
 796  * -------------------------------------
 797  * The switch flooding table is used for flooding packet replication. The table
 798  * defines a bit mask of ports for packet replication.
 799  */
 800 #define MLXSW_REG_SFTR_ID 0x2012
 801 #define MLXSW_REG_SFTR_LEN 0x420
 802
 803 static const struct mlxsw_reg_info mlxsw_reg_sftr = {
 804         .id = MLXSW_REG_SFTR_ID,
 805         .len = MLXSW_REG_SFTR_LEN,
 806 };
 807
 808 /* reg_sftr_swid
 809  * Switch partition ID with which to associate the port.
 810  * Access: Index
 811  */
 812 MLXSW_ITEM32(reg, sftr, swid, 0x00, 24, 8);
 813
 814 /* reg_sftr_flood_table
 815  * Flooding table index to associate with the specific type on the specific
 816  * switch partition.
 817  * Access: Index
 818  */
 819 MLXSW_ITEM32(reg, sftr, flood_table, 0x00, 16, 6);
 820
 821 /* reg_sftr_index
 822  * Index. Used as an index into the Flooding Table in case the table is
 823  * configured to use VID / FID or FID Offset.
 824  * Access: Index
 825  */
 826 MLXSW_ITEM32(reg, sftr, index, 0x00, 0, 16);
 827
 828 /* reg_sftr_table_type
 829  * See mlxsw_flood_table_type
 830  * Access: RW
 831  */
 832 MLXSW_ITEM32(reg, sftr, table_type, 0x04, 16, 3);
 833
 834 /* reg_sftr_range
 835  * Range of entries to update
 836  * Access: Index
 837  */
 838 MLXSW_ITEM32(reg, sftr, range, 0x04, 0, 16);
 839
 840 /* reg_sftr_port
 841  * Local port membership (1 bit per port).
 842  * Access: RW
 843  */
 844 MLXSW_ITEM_BIT_ARRAY(reg, sftr, port, 0x20, 0x20, 1);
 845
 846 /* reg_sftr_cpu_port_mask
 847  * CPU port mask (1 bit per port).
 848  * Access: W
 849  */
 850 MLXSW_ITEM_BIT_ARRAY(reg, sftr, port_mask, 0x220, 0x20, 1);
 851
 852 static inline void mlxsw_reg_sftr_pack(char *payload,
 853                                        unsigned int flood_table,
 854                                        unsigned int index,
 855                                        enum mlxsw_flood_table_type table_type,
 856                                        unsigned int range, u8 port, bool set)
 857 {
 858         MLXSW_REG_ZERO(sftr, payload);
 859         mlxsw_reg_sftr_swid_set(payload, 0);
 860         mlxsw_reg_sftr_flood_table_set(payload, flood_table);
 861         mlxsw_reg_sftr_index_set(payload, index);
 862         mlxsw_reg_sftr_table_type_set(payload, table_type);
 863         mlxsw_reg_sftr_range_set(payload, range);
 864         mlxsw_reg_sftr_port_set(payload, port, set);
 865         mlxsw_reg_sftr_port_mask_set(payload, port, 1);
 866 }
 867
 868 /* SPMLR - Switch Port MAC Learning Register
 869  * -----------------------------------------
 870  * Controls the Switch MAC learning policy per port.
 871  */
 872 #define MLXSW_REG_SPMLR_ID 0x2018
 873 #define MLXSW_REG_SPMLR_LEN 0x8
 874
 875 static const struct mlxsw_reg_info mlxsw_reg_spmlr = {
 876         .id = MLXSW_REG_SPMLR_ID,
 877         .len = MLXSW_REG_SPMLR_LEN,
 878 };
 879
 880 /* reg_spmlr_local_port
 881  * Local port number.
 882  * Access: Index
 883  */
 884 MLXSW_ITEM32(reg, spmlr, local_port, 0x00, 16, 8);
 885
 886 /* reg_spmlr_sub_port
 887  * Virtual port within the physical port.
 888  * Should be set to 0 when virtual ports are not enabled on the port.
 889  * Access: Index
 890  */
 891 MLXSW_ITEM32(reg, spmlr, sub_port, 0x00, 8, 8);
 892
 893 enum mlxsw_reg_spmlr_learn_mode {
 894         MLXSW_REG_SPMLR_LEARN_MODE_DISABLE = 0,
 895         MLXSW_REG_SPMLR_LEARN_MODE_ENABLE = 2,
 896         MLXSW_REG_SPMLR_LEARN_MODE_SEC = 3,
 897 };
 898
 899 /* reg_spmlr_learn_mode
 900  * Learning mode on the port.
 901  * 0 - Learning disabled.
 902  * 2 - Learning enabled.
 903  * 3 - Security mode.
 904  *
 905  * In security mode the switch does not learn MACs on the port, but uses the
 906  * SMAC to see if it exists on another ingress port. If so, the packet is
 907  * classified as a bad packet and is discarded unless the software registers
 908  * to receive port security error packets usign HPKT.
 909  */
 910 MLXSW_ITEM32(reg, spmlr, learn_mode, 0x04, 30, 2);
 911
 912 static inline void mlxsw_reg_spmlr_pack(char *payload, u8 local_port,
 913                                         enum mlxsw_reg_spmlr_learn_mode mode)
 914 {
 915         MLXSW_REG_ZERO(spmlr, payload);
 916         mlxsw_reg_spmlr_local_port_set(payload, local_port);
 917         mlxsw_reg_spmlr_sub_port_set(payload, 0);
 918         mlxsw_reg_spmlr_learn_mode_set(payload, mode);
 919 }
 920
 921 /* SVFA - Switch VID to FID Allocation Register
 922  * --------------------------------------------
 923  * Controls the VID to FID mapping and {Port, VID} to FID mapping for
 924  * virtualized ports.
 925  */
 926 #define MLXSW_REG_SVFA_ID 0x201C
 927 #define MLXSW_REG_SVFA_LEN 0x10
 928
 929 static const struct mlxsw_reg_info mlxsw_reg_svfa = {
 930         .id = MLXSW_REG_SVFA_ID,
 931         .len = MLXSW_REG_SVFA_LEN,
 932 };
 933
 934 /* reg_svfa_swid
 935  * Switch partition ID.
 936  * Access: Index
 937  */
 938 MLXSW_ITEM32(reg, svfa, swid, 0x00, 24, 8);
 939
 940 /* reg_svfa_local_port
 941  * Local port number.
 942  * Access: Index
 943  *
 944  * Note: Reserved for 802.1Q FIDs.
 945  */
 946 MLXSW_ITEM32(reg, svfa, local_port, 0x00, 16, 8);
 947
 948 enum mlxsw_reg_svfa_mt {
 949         MLXSW_REG_SVFA_MT_VID_TO_FID,
 950         MLXSW_REG_SVFA_MT_PORT_VID_TO_FID,
 951 };
 952
 953 /* reg_svfa_mapping_table
 954  * Mapping table:
 955  * 0 - VID to FID
 956  * 1 - {Port, VID} to FID
 957  * Access: Index
 958  *
 959  * Note: Reserved for SwitchX-2.
 960  */
 961 MLXSW_ITEM32(reg, svfa, mapping_table, 0x00, 8, 3);
 962
 963 /* reg_svfa_v
 964  * Valid.
 965  * Valid if set.
 966  * Access: RW
 967  *
 968  * Note: Reserved for SwitchX-2.
 969  */
 970 MLXSW_ITEM32(reg, svfa, v, 0x00, 0, 1);
 971
 972 /* reg_svfa_fid
 973  * Filtering ID.
 974  * Access: RW
 975  */
 976 MLXSW_ITEM32(reg, svfa, fid, 0x04, 16, 16);
 977
 978 /* reg_svfa_vid
 979  * VLAN ID.
 980  * Access: Index
 981  */
 982 MLXSW_ITEM32(reg, svfa, vid, 0x04, 0, 12);
 983
 984 /* reg_svfa_counter_set_type
 985  * Counter set type for flow counters.
 986  * Access: RW
 987  *
 988  * Note: Reserved for SwitchX-2.
 989  */
 990 MLXSW_ITEM32(reg, svfa, counter_set_type, 0x08, 24, 8);
 991
 992 /* reg_svfa_counter_index
 993  * Counter index for flow counters.
 994  * Access: RW
 995  *
 996  * Note: Reserved for SwitchX-2.
 997  */
 998 MLXSW_ITEM32(reg, svfa, counter_index, 0x08, 0, 24);
 999
1000 static inline void mlxsw_reg_svfa_pack(char *payload, u8 local_port,
1001                                        enum mlxsw_reg_svfa_mt mt, bool valid,
1002                                        u16 fid, u16 vid)
1003 {
1004         MLXSW_REG_ZERO(svfa, payload);
1005         local_port = mt == MLXSW_REG_SVFA_MT_VID_TO_FID ? 0 : local_port;
1006         mlxsw_reg_svfa_swid_set(payload, 0);
1007         mlxsw_reg_svfa_local_port_set(payload, local_port);
1008         mlxsw_reg_svfa_mapping_table_set(payload, mt);
1009         mlxsw_reg_svfa_v_set(payload, valid);
1010         mlxsw_reg_svfa_fid_set(payload, fid);
1011         mlxsw_reg_svfa_vid_set(payload, vid);
1012 }
1013
1014 /* SVPE - Switch Virtual-Port Enabling Register
1015  * --------------------------------------------
1016  * Enables port virtualization.
1017  */
1018 #define MLXSW_REG_SVPE_ID 0x201E
1019 #define MLXSW_REG_SVPE_LEN 0x4
1020
1021 static const struct mlxsw_reg_info mlxsw_reg_svpe = {
1022         .id = MLXSW_REG_SVPE_ID,
1023         .len = MLXSW_REG_SVPE_LEN,
1024 };
1025
1026 /* reg_svpe_local_port
1027  * Local port number
1028  * Access: Index
1029  *
1030  * Note: CPU port is not supported (uses VLAN mode only).
1031  */
1032 MLXSW_ITEM32(reg, svpe, local_port, 0x00, 16, 8);
1033
1034 /* reg_svpe_vp_en
1035  * Virtual port enable.
1036  * 0 - Disable, VLAN mode (VID to FID).
1037  * 1 - Enable, Virtual port mode ({Port, VID} to FID).
1038  * Access: RW
1039  */
1040 MLXSW_ITEM32(reg, svpe, vp_en, 0x00, 8, 1);
1041
1042 static inline void mlxsw_reg_svpe_pack(char *payload, u8 local_port,
1043                                        bool enable)
1044 {
1045         MLXSW_REG_ZERO(svpe, payload);
1046         mlxsw_reg_svpe_local_port_set(payload, local_port);
1047         mlxsw_reg_svpe_vp_en_set(payload, enable);
1048 }
1049
1050 /* SFMR - Switch FID Management Register
1051  * -------------------------------------
1052  * Creates and configures FIDs.
1053  */
1054 #define MLXSW_REG_SFMR_ID 0x201F
1055 #define MLXSW_REG_SFMR_LEN 0x18
1056
1057 static const struct mlxsw_reg_info mlxsw_reg_sfmr = {
1058         .id = MLXSW_REG_SFMR_ID,
1059         .len = MLXSW_REG_SFMR_LEN,
1060 };
1061
1062 enum mlxsw_reg_sfmr_op {
1063         MLXSW_REG_SFMR_OP_CREATE_FID,
1064         MLXSW_REG_SFMR_OP_DESTROY_FID,
1065 };
1066
1067 /* reg_sfmr_op
1068  * Operation.
1069  * 0 - Create or edit FID.
1070  * 1 - Destroy FID.
1071  * Access: WO
1072  */
1073 MLXSW_ITEM32(reg, sfmr, op, 0x00, 24, 4);
1074
1075 /* reg_sfmr_fid
1076  * Filtering ID.
1077  * Access: Index
1078  */
1079 MLXSW_ITEM32(reg, sfmr, fid, 0x00, 0, 16);
1080
1081 /* reg_sfmr_fid_offset
1082  * FID offset.
1083  * Used to point into the flooding table selected by SFGC register if
1084  * the table is of type FID-Offset. Otherwise, this field is reserved.
1085  * Access: RW
1086  */
1087 MLXSW_ITEM32(reg, sfmr, fid_offset, 0x08, 0, 16);
1088
1089 /* reg_sfmr_vtfp
1090  * Valid Tunnel Flood Pointer.
1091  * If not set, then nve_tunnel_flood_ptr is reserved and considered NULL.
1092  * Access: RW
1093  *
1094  * Note: Reserved for 802.1Q FIDs.
1095  */
1096 MLXSW_ITEM32(reg, sfmr, vtfp, 0x0C, 31, 1);
1097
1098 /* reg_sfmr_nve_tunnel_flood_ptr
1099  * Underlay Flooding and BC Pointer.
1100  * Used as a pointer to the first entry of the group based link lists of
1101  * flooding or BC entries (for NVE tunnels).
1102  * Access: RW
1103  */
1104 MLXSW_ITEM32(reg, sfmr, nve_tunnel_flood_ptr, 0x0C, 0, 24);
1105
1106 /* reg_sfmr_vv
1107  * VNI Valid.
1108  * If not set, then vni is reserved.
1109  * Access: RW
1110  *
1111  * Note: Reserved for 802.1Q FIDs.
1112  */
1113 MLXSW_ITEM32(reg, sfmr, vv, 0x10, 31, 1);
1114
1115 /* reg_sfmr_vni
1116  * Virtual Network Identifier.
1117  * Access: RW
1118  *
1119  * Note: A given VNI can only be assigned to one FID.
1120  */
1121 MLXSW_ITEM32(reg, sfmr, vni, 0x10, 0, 24);
1122
1123 static inline void mlxsw_reg_sfmr_pack(char *payload,
1124                                        enum mlxsw_reg_sfmr_op op, u16 fid,
1125                                        u16 fid_offset)
1126 {
1127         MLXSW_REG_ZERO(sfmr, payload);
1128         mlxsw_reg_sfmr_op_set(payload, op);
1129         mlxsw_reg_sfmr_fid_set(payload, fid);
1130         mlxsw_reg_sfmr_fid_offset_set(payload, fid_offset);
1131         mlxsw_reg_sfmr_vtfp_set(payload, false);
1132         mlxsw_reg_sfmr_vv_set(payload, false);
1133 }
1134
1135 /* SPVMLR - Switch Port VLAN MAC Learning Register
1136  * -----------------------------------------------
1137  * Controls the switch MAC learning policy per {Port, VID}.
1138  */
1139 #define MLXSW_REG_SPVMLR_ID 0x2020
1140 #define MLXSW_REG_SPVMLR_BASE_LEN 0x04 /* base length, without records */
1141 #define MLXSW_REG_SPVMLR_REC_LEN 0x04 /* record length */
1142 #define MLXSW_REG_SPVMLR_REC_MAX_COUNT 255
1143 #define MLXSW_REG_SPVMLR_LEN (MLXSW_REG_SPVMLR_BASE_LEN + \
1144                               MLXSW_REG_SPVMLR_REC_LEN * \
1145                               MLXSW_REG_SPVMLR_REC_MAX_COUNT)
1146
1147 static const struct mlxsw_reg_info mlxsw_reg_spvmlr = {
1148         .id = MLXSW_REG_SPVMLR_ID,
1149         .len = MLXSW_REG_SPVMLR_LEN,
1150 };
1151
1152 /* reg_spvmlr_local_port
1153  * Local ingress port.
1154  * Access: Index
1155  *
1156  * Note: CPU port is not supported.
1157  */
1158 MLXSW_ITEM32(reg, spvmlr, local_port, 0x00, 16, 8);
1159
1160 /* reg_spvmlr_num_rec
1161  * Number of records to update.
1162  * Access: OP
1163  */
1164 MLXSW_ITEM32(reg, spvmlr, num_rec, 0x00, 0, 8);
1165
1166 /* reg_spvmlr_rec_learn_enable
1167  * 0 - Disable learning for {Port, VID}.
1168  * 1 - Enable learning for {Port, VID}.
1169  * Access: RW
1170  */
1171 MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_learn_enable, MLXSW_REG_SPVMLR_BASE_LEN,
1172                      31, 1, MLXSW_REG_SPVMLR_REC_LEN, 0x00, false);
1173
1174 /* reg_spvmlr_rec_vid
1175  * VLAN ID to be added/removed from port or for querying.
1176  * Access: Index
1177  */
1178 MLXSW_ITEM32_INDEXED(reg, spvmlr, rec_vid, MLXSW_REG_SPVMLR_BASE_LEN, 0, 12,
1179                      MLXSW_REG_SPVMLR_REC_LEN, 0x00, false);
1180
1181 static inline void mlxsw_reg_spvmlr_pack(char *payload, u8 local_port,
1182                                          u16 vid_begin, u16 vid_end,
1183                                          bool learn_enable)
1184 {
1185         int num_rec = vid_end - vid_begin + 1;
1186         int i;
1187
1188         WARN_ON(num_rec < 1 || num_rec > MLXSW_REG_SPVMLR_REC_MAX_COUNT);
1189
1190         MLXSW_REG_ZERO(spvmlr, payload);
1191         mlxsw_reg_spvmlr_local_port_set(payload, local_port);
1192         mlxsw_reg_spvmlr_num_rec_set(payload, num_rec);
1193
1194         for (i = 0; i < num_rec; i++) {
1195                 mlxsw_reg_spvmlr_rec_learn_enable_set(payload, i, learn_enable);
1196                 mlxsw_reg_spvmlr_rec_vid_set(payload, i, vid_begin + i);
1197         }
1198 }
1199
1200 /* PMLP - Ports Module to Local Port Register
1201  * ------------------------------------------
1202  * Configures the assignment of modules to local ports.
1203  */
1204 #define MLXSW_REG_PMLP_ID 0x5002
1205 #define MLXSW_REG_PMLP_LEN 0x40
1206
1207 static const struct mlxsw_reg_info mlxsw_reg_pmlp = {
1208         .id = MLXSW_REG_PMLP_ID,
1209         .len = MLXSW_REG_PMLP_LEN,
1210 };
1211
1212 /* reg_pmlp_rxtx
1213  * 0 - Tx value is used for both Tx and Rx.
1214  * 1 - Rx value is taken from a separte field.
1215  * Access: RW
1216  */
1217 MLXSW_ITEM32(reg, pmlp, rxtx, 0x00, 31, 1);
1218
1219 /* reg_pmlp_local_port
1220  * Local port number.
1221  * Access: Index
1222  */
1223 MLXSW_ITEM32(reg, pmlp, local_port, 0x00, 16, 8);
1224
1225 /* reg_pmlp_width
1226  * 0 - Unmap local port.
1227  * 1 - Lane 0 is used.
1228  * 2 - Lanes 0 and 1 are used.
1229  * 4 - Lanes 0, 1, 2 and 3 are used.
1230  * Access: RW
1231  */
1232 MLXSW_ITEM32(reg, pmlp, width, 0x00, 0, 8);
1233
1234 /* reg_pmlp_module
1235  * Module number.
1236  * Access: RW
1237  */
1238 MLXSW_ITEM32_INDEXED(reg, pmlp, module, 0x04, 0, 8, 0x04, 0, false);
1239
1240 /* reg_pmlp_tx_lane
1241  * Tx Lane. When rxtx field is cleared, this field is used for Rx as well.
1242  * Access: RW
1243  */
1244 MLXSW_ITEM32_INDEXED(reg, pmlp, tx_lane, 0x04, 16, 2, 0x04, 16, false);
1245
1246 /* reg_pmlp_rx_lane
1247  * Rx Lane. When rxtx field is cleared, this field is ignored and Rx lane is
1248  * equal to Tx lane.
1249  * Access: RW
1250  */
1251 MLXSW_ITEM32_INDEXED(reg, pmlp, rx_lane, 0x04, 24, 2, 0x04, 24, false);
1252
1253 static inline void mlxsw_reg_pmlp_pack(char *payload, u8 local_port)
1254 {
1255         MLXSW_REG_ZERO(pmlp, payload);
1256         mlxsw_reg_pmlp_local_port_set(payload, local_port);
1257 }
1258
1259 /* PMTU - Port MTU Register
1260  * ------------------------
1261  * Configures and reports the port MTU.
1262  */
1263 #define MLXSW_REG_PMTU_ID 0x5003
1264 #define MLXSW_REG_PMTU_LEN 0x10
1265
1266 static const struct mlxsw_reg_info mlxsw_reg_pmtu = {
1267         .id = MLXSW_REG_PMTU_ID,
1268         .len = MLXSW_REG_PMTU_LEN,
1269 };
1270
1271 /* reg_pmtu_local_port
1272  * Local port number.
1273  * Access: Index
1274  */
1275 MLXSW_ITEM32(reg, pmtu, local_port, 0x00, 16, 8);
1276
1277 /* reg_pmtu_max_mtu
1278  * Maximum MTU.
1279  * When port type (e.g. Ethernet) is configured, the relevant MTU is
1280  * reported, otherwise the minimum between the max_mtu of the different
1281  * types is reported.
1282  * Access: RO
1283  */
1284 MLXSW_ITEM32(reg, pmtu, max_mtu, 0x04, 16, 16);
1285
1286 /* reg_pmtu_admin_mtu
1287  * MTU value to set port to. Must be smaller or equal to max_mtu.
1288  * Note: If port type is Infiniband, then port must be disabled, when its
1289  * MTU is set.
1290  * Access: RW
1291  */
1292 MLXSW_ITEM32(reg, pmtu, admin_mtu, 0x08, 16, 16);
1293
1294 /* reg_pmtu_oper_mtu
1295  * The actual MTU configured on the port. Packets exceeding this size
1296  * will be dropped.
1297  * Note: In Ethernet and FC oper_mtu == admin_mtu, however, in Infiniband
1298  * oper_mtu might be smaller than admin_mtu.
1299  * Access: RO
1300  */
1301 MLXSW_ITEM32(reg, pmtu, oper_mtu, 0x0C, 16, 16);
1302
1303 static inline void mlxsw_reg_pmtu_pack(char *payload, u8 local_port,
1304                                        u16 new_mtu)
1305 {
1306         MLXSW_REG_ZERO(pmtu, payload);
1307         mlxsw_reg_pmtu_local_port_set(payload, local_port);
1308         mlxsw_reg_pmtu_max_mtu_set(payload, 0);
1309         mlxsw_reg_pmtu_admin_mtu_set(payload, new_mtu);
1310         mlxsw_reg_pmtu_oper_mtu_set(payload, 0);
1311 }
1312
1313 /* PTYS - Port Type and Speed Register
1314  * -----------------------------------
1315  * Configures and reports the port speed type.
1316  *
1317  * Note: When set while the link is up, the changes will not take effect
1318  * until the port transitions from down to up state.
1319  */
1320 #define MLXSW_REG_PTYS_ID 0x5004
1321 #define MLXSW_REG_PTYS_LEN 0x40
1322
1323 static const struct mlxsw_reg_info mlxsw_reg_ptys = {
1324         .id = MLXSW_REG_PTYS_ID,
1325         .len = MLXSW_REG_PTYS_LEN,
1326 };
1327
1328 /* reg_ptys_local_port
1329  * Local port number.
1330  * Access: Index
1331  */
1332 MLXSW_ITEM32(reg, ptys, local_port, 0x00, 16, 8);
1333
1334 #define MLXSW_REG_PTYS_PROTO_MASK_ETH   BIT(2)
1335
1336 /* reg_ptys_proto_mask
1337  * Protocol mask. Indicates which protocol is used.
1338  * 0 - Infiniband.
1339  * 1 - Fibre Channel.
1340  * 2 - Ethernet.
1341  * Access: Index
1342  */
1343 MLXSW_ITEM32(reg, ptys, proto_mask, 0x00, 0, 3);
1344
1345 #define MLXSW_REG_PTYS_ETH_SPEED_SGMII                  BIT(0)
1346 #define MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX            BIT(1)
1347 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4            BIT(2)
1348 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4            BIT(3)
1349 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KR             BIT(4)
1350 #define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2            BIT(5)
1351 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4            BIT(6)
1352 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4            BIT(7)
1353 #define MLXSW_REG_PTYS_ETH_SPEED_56GBASE_R4             BIT(8)
1354 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR             BIT(12)
1355 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_SR             BIT(13)
1356 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_ER_LR          BIT(14)
1357 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_SR4            BIT(15)
1358 #define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_LR4_ER4        BIT(16)
1359 #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR4            BIT(19)
1360 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4           BIT(20)
1361 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4           BIT(21)
1362 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4           BIT(22)
1363 #define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4       BIT(23)
1364 #define MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX             BIT(24)
1365 #define MLXSW_REG_PTYS_ETH_SPEED_100BASE_T              BIT(25)
1366 #define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T              BIT(26)
1367 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR             BIT(27)
1368 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR             BIT(28)
1369 #define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR             BIT(29)
1370 #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_CR2            BIT(30)
1371 #define MLXSW_REG_PTYS_ETH_SPEED_50GBASE_KR2            BIT(31)
1372
1373 /* reg_ptys_eth_proto_cap
1374  * Ethernet port supported speeds and protocols.
1375  * Access: RO
1376  */
1377 MLXSW_ITEM32(reg, ptys, eth_proto_cap, 0x0C, 0, 32);
1378
1379 /* reg_ptys_eth_proto_admin
1380  * Speed and protocol to set port to.
1381  * Access: RW
1382  */
1383 MLXSW_ITEM32(reg, ptys, eth_proto_admin, 0x18, 0, 32);
1384
1385 /* reg_ptys_eth_proto_oper
1386  * The current speed and protocol configured for the port.
1387  * Access: RO
1388  */
1389 MLXSW_ITEM32(reg, ptys, eth_proto_oper, 0x24, 0, 32);
1390
1391 static inline void mlxsw_reg_ptys_pack(char *payload, u8 local_port,
1392                                        u32 proto_admin)
1393 {
1394         MLXSW_REG_ZERO(ptys, payload);
1395         mlxsw_reg_ptys_local_port_set(payload, local_port);
1396         mlxsw_reg_ptys_proto_mask_set(payload, MLXSW_REG_PTYS_PROTO_MASK_ETH);
1397         mlxsw_reg_ptys_eth_proto_admin_set(payload, proto_admin);
1398 }
1399
1400 static inline void mlxsw_reg_ptys_unpack(char *payload, u32 *p_eth_proto_cap,
1401                                          u32 *p_eth_proto_adm,
1402                                          u32 *p_eth_proto_oper)
1403 {
1404         if (p_eth_proto_cap)
1405                 *p_eth_proto_cap = mlxsw_reg_ptys_eth_proto_cap_get(payload);
1406         if (p_eth_proto_adm)
1407                 *p_eth_proto_adm = mlxsw_reg_ptys_eth_proto_admin_get(payload);
1408         if (p_eth_proto_oper)
1409                 *p_eth_proto_oper = mlxsw_reg_ptys_eth_proto_oper_get(payload);
1410 }
1411
1412 /* PPAD - Port Physical Address Register
1413  * -------------------------------------
1414  * The PPAD register configures the per port physical MAC address.
1415  */
1416 #define MLXSW_REG_PPAD_ID 0x5005
1417 #define MLXSW_REG_PPAD_LEN 0x10
1418
1419 static const struct mlxsw_reg_info mlxsw_reg_ppad = {
1420         .id = MLXSW_REG_PPAD_ID,
1421         .len = MLXSW_REG_PPAD_LEN,
1422 };
1423
1424 /* reg_ppad_single_base_mac
1425  * 0: base_mac, local port should be 0 and mac[7:0] is
1426  * reserved. HW will set incremental
1427  * 1: single_mac - mac of the local_port
1428  * Access: RW
1429  */
1430 MLXSW_ITEM32(reg, ppad, single_base_mac, 0x00, 28, 1);
1431
1432 /* reg_ppad_local_port
1433  * port number, if single_base_mac = 0 then local_port is reserved
1434  * Access: RW
1435  */
1436 MLXSW_ITEM32(reg, ppad, local_port, 0x00, 16, 8);
1437
1438 /* reg_ppad_mac
1439  * If single_base_mac = 0 - base MAC address, mac[7:0] is reserved.
1440  * If single_base_mac = 1 - the per port MAC address
1441  * Access: RW
1442  */
1443 MLXSW_ITEM_BUF(reg, ppad, mac, 0x02, 6);
1444
1445 static inline void mlxsw_reg_ppad_pack(char *payload, bool single_base_mac,
1446                                        u8 local_port)
1447 {
1448         MLXSW_REG_ZERO(ppad, payload);
1449         mlxsw_reg_ppad_single_base_mac_set(payload, !!single_base_mac);
1450         mlxsw_reg_ppad_local_port_set(payload, local_port);
1451 }
1452
1453 /* PAOS - Ports Administrative and Operational Status Register
1454  * -----------------------------------------------------------
1455  * Configures and retrieves per port administrative and operational status.
1456  */
1457 #define MLXSW_REG_PAOS_ID 0x5006
1458 #define MLXSW_REG_PAOS_LEN 0x10
1459
1460 static const struct mlxsw_reg_info mlxsw_reg_paos = {
1461         .id = MLXSW_REG_PAOS_ID,
1462         .len = MLXSW_REG_PAOS_LEN,
1463 };
1464
1465 /* reg_paos_swid
1466  * Switch partition ID with which to associate the port.
1467  * Note: while external ports uses unique local port numbers (and thus swid is
1468  * redundant), router ports use the same local port number where swid is the
1469  * only indication for the relevant port.
1470  * Access: Index
1471  */
1472 MLXSW_ITEM32(reg, paos, swid, 0x00, 24, 8);
1473
1474 /* reg_paos_local_port
1475  * Local port number.
1476  * Access: Index
1477  */
1478 MLXSW_ITEM32(reg, paos, local_port, 0x00, 16, 8);
1479
1480 /* reg_paos_admin_status
1481  * Port administrative state (the desired state of the port):
1482  * 1 - Up.
1483  * 2 - Down.
1484  * 3 - Up once. This means that in case of link failure, the port won't go
1485  *     into polling mode, but will wait to be re-enabled by software.
1486  * 4 - Disabled by system. Can only be set by hardware.
1487  * Access: RW
1488  */
1489 MLXSW_ITEM32(reg, paos, admin_status, 0x00, 8, 4);
1490
1491 /* reg_paos_oper_status
1492  * Port operational state (the current state):
1493  * 1 - Up.
1494  * 2 - Down.
1495  * 3 - Down by port failure. This means that the device will not let the
1496  *     port up again until explicitly specified by software.
1497  * Access: RO
1498  */
1499 MLXSW_ITEM32(reg, paos, oper_status, 0x00, 0, 4);
1500
1501 /* reg_paos_ase
1502  * Admin state update enabled.
1503  * Access: WO
1504  */
1505 MLXSW_ITEM32(reg, paos, ase, 0x04, 31, 1);
1506
1507 /* reg_paos_ee
1508  * Event update enable. If this bit is set, event generation will be
1509  * updated based on the e field.
1510  * Access: WO
1511  */
1512 MLXSW_ITEM32(reg, paos, ee, 0x04, 30, 1);
1513
1514 /* reg_paos_e
1515  * Event generation on operational state change:
1516  * 0 - Do not generate event.
1517  * 1 - Generate Event.
1518  * 2 - Generate Single Event.
1519  * Access: RW
1520  */
1521 MLXSW_ITEM32(reg, paos, e, 0x04, 0, 2);
1522
1523 static inline void mlxsw_reg_paos_pack(char *payload, u8 local_port,
1524                                        enum mlxsw_port_admin_status status)
1525 {
1526         MLXSW_REG_ZERO(paos, payload);
1527         mlxsw_reg_paos_swid_set(payload, 0);
1528         mlxsw_reg_paos_local_port_set(payload, local_port);
1529         mlxsw_reg_paos_admin_status_set(payload, status);
1530         mlxsw_reg_paos_oper_status_set(payload, 0);
1531         mlxsw_reg_paos_ase_set(payload, 1);
1532         mlxsw_reg_paos_ee_set(payload, 1);
1533         mlxsw_reg_paos_e_set(payload, 1);
1534 }
1535
1536 /* PPCNT - Ports Performance Counters Register
1537  * -------------------------------------------
1538  * The PPCNT register retrieves per port performance counters.
1539  */
1540 #define MLXSW_REG_PPCNT_ID 0x5008
1541 #define MLXSW_REG_PPCNT_LEN 0x100
1542
1543 static const struct mlxsw_reg_info mlxsw_reg_ppcnt = {
1544         .id = MLXSW_REG_PPCNT_ID,
1545         .len = MLXSW_REG_PPCNT_LEN,
1546 };
1547
1548 /* reg_ppcnt_swid
1549  * For HCA: must be always 0.
1550  * Switch partition ID to associate port with.
1551  * Switch partitions are numbered from 0 to 7 inclusively.
1552  * Switch partition 254 indicates stacking ports.
1553  * Switch partition 255 indicates all switch partitions.
1554  * Only valid on Set() operation with local_port=255.
1555  * Access: Index
1556  */
1557 MLXSW_ITEM32(reg, ppcnt, swid, 0x00, 24, 8);
1558
1559 /* reg_ppcnt_local_port
1560  * Local port number.
1561  * 255 indicates all ports on the device, and is only allowed
1562  * for Set() operation.
1563  * Access: Index
1564  */
1565 MLXSW_ITEM32(reg, ppcnt, local_port, 0x00, 16, 8);
1566
1567 /* reg_ppcnt_pnat
1568  * Port number access type:
1569  * 0 - Local port number
1570  * 1 - IB port number
1571  * Access: Index
1572  */
1573 MLXSW_ITEM32(reg, ppcnt, pnat, 0x00, 14, 2);
1574
1575 /* reg_ppcnt_grp
1576  * Performance counter group.
1577  * Group 63 indicates all groups. Only valid on Set() operation with
1578  * clr bit set.
1579  * 0x0: IEEE 802.3 Counters
1580  * 0x1: RFC 2863 Counters
1581  * 0x2: RFC 2819 Counters
1582  * 0x3: RFC 3635 Counters
1583  * 0x5: Ethernet Extended Counters
1584  * 0x8: Link Level Retransmission Counters
1585  * 0x10: Per Priority Counters
1586  * 0x11: Per Traffic Class Counters
1587  * 0x12: Physical Layer Counters
1588  * Access: Index
1589  */
1590 MLXSW_ITEM32(reg, ppcnt, grp, 0x00, 0, 6);
1591
1592 /* reg_ppcnt_clr
1593  * Clear counters. Setting the clr bit will reset the counter value
1594  * for all counters in the counter group. This bit can be set
1595  * for both Set() and Get() operation.
1596  * Access: OP
1597  */
1598 MLXSW_ITEM32(reg, ppcnt, clr, 0x04, 31, 1);
1599
1600 /* reg_ppcnt_prio_tc
1601  * Priority for counter set that support per priority, valid values: 0-7.
1602  * Traffic class for counter set that support per traffic class,
1603  * valid values: 0- cap_max_tclass-1 .
1604  * For HCA: cap_max_tclass is always 8.
1605  * Otherwise must be 0.
1606  * Access: Index
1607  */
1608 MLXSW_ITEM32(reg, ppcnt, prio_tc, 0x04, 0, 5);
1609
1610 /* reg_ppcnt_a_frames_transmitted_ok
1611  * Access: RO
1612  */
1613 MLXSW_ITEM64(reg, ppcnt, a_frames_transmitted_ok,
1614              0x08 + 0x00, 0, 64);
1615
1616 /* reg_ppcnt_a_frames_received_ok
1617  * Access: RO
1618  */
1619 MLXSW_ITEM64(reg, ppcnt, a_frames_received_ok,
1620              0x08 + 0x08, 0, 64);
1621
1622 /* reg_ppcnt_a_frame_check_sequence_errors
1623  * Access: RO
1624  */
1625 MLXSW_ITEM64(reg, ppcnt, a_frame_check_sequence_errors,
1626              0x08 + 0x10, 0, 64);
1627
1628 /* reg_ppcnt_a_alignment_errors
1629  * Access: RO
1630  */
1631 MLXSW_ITEM64(reg, ppcnt, a_alignment_errors,
1632              0x08 + 0x18, 0, 64);
1633
1634 /* reg_ppcnt_a_octets_transmitted_ok
1635  * Access: RO
1636  */
1637 MLXSW_ITEM64(reg, ppcnt, a_octets_transmitted_ok,
1638              0x08 + 0x20, 0, 64);
1639
1640 /* reg_ppcnt_a_octets_received_ok
1641  * Access: RO
1642  */
1643 MLXSW_ITEM64(reg, ppcnt, a_octets_received_ok,
1644              0x08 + 0x28, 0, 64);
1645
1646 /* reg_ppcnt_a_multicast_frames_xmitted_ok
1647  * Access: RO
1648  */
1649 MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_xmitted_ok,
1650              0x08 + 0x30, 0, 64);
1651
1652 /* reg_ppcnt_a_broadcast_frames_xmitted_ok
1653  * Access: RO
1654  */
1655 MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_xmitted_ok,
1656              0x08 + 0x38, 0, 64);
1657
1658 /* reg_ppcnt_a_multicast_frames_received_ok
1659  * Access: RO
1660  */
1661 MLXSW_ITEM64(reg, ppcnt, a_multicast_frames_received_ok,
1662              0x08 + 0x40, 0, 64);
1663
1664 /* reg_ppcnt_a_broadcast_frames_received_ok
1665  * Access: RO
1666  */
1667 MLXSW_ITEM64(reg, ppcnt, a_broadcast_frames_received_ok,
1668              0x08 + 0x48, 0, 64);
1669
1670 /* reg_ppcnt_a_in_range_length_errors
1671  * Access: RO
1672  */
1673 MLXSW_ITEM64(reg, ppcnt, a_in_range_length_errors,
1674              0x08 + 0x50, 0, 64);
1675
1676 /* reg_ppcnt_a_out_of_range_length_field
1677  * Access: RO
1678  */
1679 MLXSW_ITEM64(reg, ppcnt, a_out_of_range_length_field,
1680              0x08 + 0x58, 0, 64);
1681
1682 /* reg_ppcnt_a_frame_too_long_errors
1683  * Access: RO
1684  */
1685 MLXSW_ITEM64(reg, ppcnt, a_frame_too_long_errors,
1686              0x08 + 0x60, 0, 64);
1687
1688 /* reg_ppcnt_a_symbol_error_during_carrier
1689  * Access: RO
1690  */
1691 MLXSW_ITEM64(reg, ppcnt, a_symbol_error_during_carrier,
1692              0x08 + 0x68, 0, 64);
1693
1694 /* reg_ppcnt_a_mac_control_frames_transmitted
1695  * Access: RO
1696  */
1697 MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_transmitted,
1698              0x08 + 0x70, 0, 64);
1699
1700 /* reg_ppcnt_a_mac_control_frames_received
1701  * Access: RO
1702  */
1703 MLXSW_ITEM64(reg, ppcnt, a_mac_control_frames_received,
1704              0x08 + 0x78, 0, 64);
1705
1706 /* reg_ppcnt_a_unsupported_opcodes_received
1707  * Access: RO
1708  */
1709 MLXSW_ITEM64(reg, ppcnt, a_unsupported_opcodes_received,
1710              0x08 + 0x80, 0, 64);
1711
1712 /* reg_ppcnt_a_pause_mac_ctrl_frames_received
1713  * Access: RO
1714  */
1715 MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_received,
1716              0x08 + 0x88, 0, 64);
1717
1718 /* reg_ppcnt_a_pause_mac_ctrl_frames_transmitted
1719  * Access: RO
1720  */
1721 MLXSW_ITEM64(reg, ppcnt, a_pause_mac_ctrl_frames_transmitted,
1722              0x08 + 0x90, 0, 64);
1723
1724 static inline void mlxsw_reg_ppcnt_pack(char *payload, u8 local_port)
1725 {
1726         MLXSW_REG_ZERO(ppcnt, payload);
1727         mlxsw_reg_ppcnt_swid_set(payload, 0);
1728         mlxsw_reg_ppcnt_local_port_set(payload, local_port);
1729         mlxsw_reg_ppcnt_pnat_set(payload, 0);
1730         mlxsw_reg_ppcnt_grp_set(payload, 0);
1731         mlxsw_reg_ppcnt_clr_set(payload, 0);
1732         mlxsw_reg_ppcnt_prio_tc_set(payload, 0);
1733 }
1734
1735 /* PBMC - Port Buffer Management Control Register
1736  * ----------------------------------------------
1737  * The PBMC register configures and retrieves the port packet buffer
1738  * allocation for different Prios, and the Pause threshold management.
1739  */
1740 #define MLXSW_REG_PBMC_ID 0x500C
1741 #define MLXSW_REG_PBMC_LEN 0x68
1742
1743 static const struct mlxsw_reg_info mlxsw_reg_pbmc = {
1744         .id = MLXSW_REG_PBMC_ID,
1745         .len = MLXSW_REG_PBMC_LEN,
1746 };
1747
1748 /* reg_pbmc_local_port
1749  * Local port number.
1750  * Access: Index
1751  */
1752 MLXSW_ITEM32(reg, pbmc, local_port, 0x00, 16, 8);
1753
1754 /* reg_pbmc_xoff_timer_value
1755  * When device generates a pause frame, it uses this value as the pause
1756  * timer (time for the peer port to pause in quota-512 bit time).
1757  * Access: RW
1758  */
1759 MLXSW_ITEM32(reg, pbmc, xoff_timer_value, 0x04, 16, 16);
1760
1761 /* reg_pbmc_xoff_refresh
1762  * The time before a new pause frame should be sent to refresh the pause RW
1763  * state. Using the same units as xoff_timer_value above (in quota-512 bit
1764  * time).
1765  * Access: RW
1766  */
1767 MLXSW_ITEM32(reg, pbmc, xoff_refresh, 0x04, 0, 16);
1768
1769 /* reg_pbmc_buf_lossy
1770  * The field indicates if the buffer is lossy.
1771  * 0 - Lossless
1772  * 1 - Lossy
1773  * Access: RW
1774  */
1775 MLXSW_ITEM32_INDEXED(reg, pbmc, buf_lossy, 0x0C, 25, 1, 0x08, 0x00, false);
1776
1777 /* reg_pbmc_buf_epsb
1778  * Eligible for Port Shared buffer.
1779  * If epsb is set, packets assigned to buffer are allowed to insert the port
1780  * shared buffer.
1781  * When buf_lossy is MLXSW_REG_PBMC_LOSSY_LOSSY this field is reserved.
1782  * Access: RW
1783  */
1784 MLXSW_ITEM32_INDEXED(reg, pbmc, buf_epsb, 0x0C, 24, 1, 0x08, 0x00, false);
1785
1786 /* reg_pbmc_buf_size
1787  * The part of the packet buffer array is allocated for the specific buffer.
1788  * Units are represented in cells.
1789  * Access: RW
1790  */
1791 MLXSW_ITEM32_INDEXED(reg, pbmc, buf_size, 0x0C, 0, 16, 0x08, 0x00, false);
1792
1793 static inline void mlxsw_reg_pbmc_pack(char *payload, u8 local_port,
1794                                        u16 xoff_timer_value, u16 xoff_refresh)
1795 {
1796         MLXSW_REG_ZERO(pbmc, payload);
1797         mlxsw_reg_pbmc_local_port_set(payload, local_port);
1798         mlxsw_reg_pbmc_xoff_timer_value_set(payload, xoff_timer_value);
1799         mlxsw_reg_pbmc_xoff_refresh_set(payload, xoff_refresh);
1800 }
1801
1802 static inline void mlxsw_reg_pbmc_lossy_buffer_pack(char *payload,
1803                                                     int buf_index,
1804                                                     u16 size)
1805 {
1806         mlxsw_reg_pbmc_buf_lossy_set(payload, buf_index, 1);
1807         mlxsw_reg_pbmc_buf_epsb_set(payload, buf_index, 0);
1808         mlxsw_reg_pbmc_buf_size_set(payload, buf_index, size);
1809 }
1810
1811 /* PSPA - Port Switch Partition Allocation
1812  * ---------------------------------------
1813  * Controls the association of a port with a switch partition and enables
1814  * configuring ports as stacking ports.
1815  */
1816 #define MLXSW_REG_PSPA_ID 0x500D
1817 #define MLXSW_REG_PSPA_LEN 0x8
1818
1819 static const struct mlxsw_reg_info mlxsw_reg_pspa = {
1820         .id = MLXSW_REG_PSPA_ID,
1821         .len = MLXSW_REG_PSPA_LEN,
1822 };
1823
1824 /* reg_pspa_swid
1825  * Switch partition ID.
1826  * Access: RW
1827  */
1828 MLXSW_ITEM32(reg, pspa, swid, 0x00, 24, 8);
1829
1830 /* reg_pspa_local_port
1831  * Local port number.
1832  * Access: Index
1833  */
1834 MLXSW_ITEM32(reg, pspa, local_port, 0x00, 16, 8);
1835
1836 /* reg_pspa_sub_port
1837  * Virtual port within the local port. Set to 0 when virtual ports are
1838  * disabled on the local port.
1839  * Access: Index
1840  */
1841 MLXSW_ITEM32(reg, pspa, sub_port, 0x00, 8, 8);
1842
1843 static inline void mlxsw_reg_pspa_pack(char *payload, u8 swid, u8 local_port)
1844 {
1845         MLXSW_REG_ZERO(pspa, payload);
1846         mlxsw_reg_pspa_swid_set(payload, swid);
1847         mlxsw_reg_pspa_local_port_set(payload, local_port);
1848         mlxsw_reg_pspa_sub_port_set(payload, 0);
1849 }
1850
1851 /* HTGT - Host Trap Group Table
1852  * ----------------------------
1853  * Configures the properties for forwarding to CPU.
1854  */
1855 #define MLXSW_REG_HTGT_ID 0x7002
1856 #define MLXSW_REG_HTGT_LEN 0x100
1857
1858 static const struct mlxsw_reg_info mlxsw_reg_htgt = {
1859         .id = MLXSW_REG_HTGT_ID,
1860         .len = MLXSW_REG_HTGT_LEN,
1861 };
1862
1863 /* reg_htgt_swid
1864  * Switch partition ID.
1865  * Access: Index
1866  */
1867 MLXSW_ITEM32(reg, htgt, swid, 0x00, 24, 8);
1868
1869 #define MLXSW_REG_HTGT_PATH_TYPE_LOCAL 0x0      /* For locally attached CPU */
1870
1871 /* reg_htgt_type
1872  * CPU path type.
1873  * Access: RW
1874  */
1875 MLXSW_ITEM32(reg, htgt, type, 0x00, 8, 4);
1876
1877 enum mlxsw_reg_htgt_trap_group {
1878         MLXSW_REG_HTGT_TRAP_GROUP_EMAD,
1879         MLXSW_REG_HTGT_TRAP_GROUP_RX,
1880         MLXSW_REG_HTGT_TRAP_GROUP_CTRL,
1881 };
1882
1883 /* reg_htgt_trap_group
1884  * Trap group number. User defined number specifying which trap groups
1885  * should be forwarded to the CPU. The mapping between trap IDs and trap
1886  * groups is configured using HPKT register.
1887  * Access: Index
1888  */
1889 MLXSW_ITEM32(reg, htgt, trap_group, 0x00, 0, 8);
1890
1891 enum {
1892         MLXSW_REG_HTGT_POLICER_DISABLE,
1893         MLXSW_REG_HTGT_POLICER_ENABLE,
1894 };
1895
1896 /* reg_htgt_pide
1897  * Enable policer ID specified using 'pid' field.
1898  * Access: RW
1899  */
1900 MLXSW_ITEM32(reg, htgt, pide, 0x04, 15, 1);
1901
1902 /* reg_htgt_pid
1903  * Policer ID for the trap group.
1904  * Access: RW
1905  */
1906 MLXSW_ITEM32(reg, htgt, pid, 0x04, 0, 8);
1907
1908 #define MLXSW_REG_HTGT_TRAP_TO_CPU 0x0
1909
1910 /* reg_htgt_mirror_action
1911  * Mirror action to use.
1912  * 0 - Trap to CPU.
1913  * 1 - Trap to CPU and mirror to a mirroring agent.
1914  * 2 - Mirror to a mirroring agent and do not trap to CPU.
1915  * Access: RW
1916  *
1917  * Note: Mirroring to a mirroring agent is only supported in Spectrum.
1918  */
1919 MLXSW_ITEM32(reg, htgt, mirror_action, 0x08, 8, 2);
1920
1921 /* reg_htgt_mirroring_agent
1922  * Mirroring agent.
1923  * Access: RW
1924  */
1925 MLXSW_ITEM32(reg, htgt, mirroring_agent, 0x08, 0, 3);
1926
1927 /* reg_htgt_priority
1928  * Trap group priority.
1929  * In case a packet matches multiple classification rules, the packet will
1930  * only be trapped once, based on the trap ID associated with the group (via
1931  * register HPKT) with the highest priority.
1932  * Supported values are 0-7, with 7 represnting the highest priority.
1933  * Access: RW
1934  *
1935  * Note: In SwitchX-2 this field is ignored and the priority value is replaced
1936  * by the 'trap_group' field.
1937  */
1938 MLXSW_ITEM32(reg, htgt, priority, 0x0C, 0, 4);
1939
1940 /* reg_htgt_local_path_cpu_tclass
1941  * CPU ingress traffic class for the trap group.
1942  * Access: RW
1943  */
1944 MLXSW_ITEM32(reg, htgt, local_path_cpu_tclass, 0x10, 16, 6);
1945
1946 #define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_EMAD      0x15
1947 #define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_RX        0x14
1948 #define MLXSW_REG_HTGT_LOCAL_PATH_RDQ_CTRL      0x13
1949
1950 /* reg_htgt_local_path_rdq
1951  * Receive descriptor queue (RDQ) to use for the trap group.
1952  * Access: RW
1953  */
1954 MLXSW_ITEM32(reg, htgt, local_path_rdq, 0x10, 0, 6);
1955
1956 static inline void mlxsw_reg_htgt_pack(char *payload,
1957                                        enum mlxsw_reg_htgt_trap_group group)
1958 {
1959         u8 swid, rdq;
1960
1961         MLXSW_REG_ZERO(htgt, payload);
1962         switch (group) {
1963         case MLXSW_REG_HTGT_TRAP_GROUP_EMAD:
1964                 swid = MLXSW_PORT_SWID_ALL_SWIDS;
1965                 rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_EMAD;
1966                 break;
1967         case MLXSW_REG_HTGT_TRAP_GROUP_RX:
1968                 swid = 0;
1969                 rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_RX;
1970                 break;
1971         case MLXSW_REG_HTGT_TRAP_GROUP_CTRL:
1972                 swid = 0;
1973                 rdq = MLXSW_REG_HTGT_LOCAL_PATH_RDQ_CTRL;
1974                 break;
1975         }
1976         mlxsw_reg_htgt_swid_set(payload, swid);
1977         mlxsw_reg_htgt_type_set(payload, MLXSW_REG_HTGT_PATH_TYPE_LOCAL);
1978         mlxsw_reg_htgt_trap_group_set(payload, group);
1979         mlxsw_reg_htgt_pide_set(payload, MLXSW_REG_HTGT_POLICER_DISABLE);
1980         mlxsw_reg_htgt_pid_set(payload, 0);
1981         mlxsw_reg_htgt_mirror_action_set(payload, MLXSW_REG_HTGT_TRAP_TO_CPU);
1982         mlxsw_reg_htgt_mirroring_agent_set(payload, 0);
1983         mlxsw_reg_htgt_priority_set(payload, 0);
1984         mlxsw_reg_htgt_local_path_cpu_tclass_set(payload, 7);
1985         mlxsw_reg_htgt_local_path_rdq_set(payload, rdq);
1986 }
1987
1988 /* HPKT - Host Packet Trap
1989  * -----------------------
1990  * Configures trap IDs inside trap groups.
1991  */
1992 #define MLXSW_REG_HPKT_ID 0x7003
1993 #define MLXSW_REG_HPKT_LEN 0x10
1994
1995 static const struct mlxsw_reg_info mlxsw_reg_hpkt = {
1996         .id = MLXSW_REG_HPKT_ID,
1997         .len = MLXSW_REG_HPKT_LEN,
1998 };
1999
2000 enum {
2001         MLXSW_REG_HPKT_ACK_NOT_REQUIRED,
2002         MLXSW_REG_HPKT_ACK_REQUIRED,
2003 };
2004
2005 /* reg_hpkt_ack
2006  * Require acknowledgements from the host for events.
2007  * If set, then the device will wait for the event it sent to be acknowledged
2008  * by the host. This option is only relevant for event trap IDs.
2009  * Access: RW
2010  *
2011  * Note: Currently not supported by firmware.
2012  */
2013 MLXSW_ITEM32(reg, hpkt, ack, 0x00, 24, 1);
2014
2015 enum mlxsw_reg_hpkt_action {
2016         MLXSW_REG_HPKT_ACTION_FORWARD,
2017         MLXSW_REG_HPKT_ACTION_TRAP_TO_CPU,
2018         MLXSW_REG_HPKT_ACTION_MIRROR_TO_CPU,
2019         MLXSW_REG_HPKT_ACTION_DISCARD,
2020         MLXSW_REG_HPKT_ACTION_SOFT_DISCARD,
2021         MLXSW_REG_HPKT_ACTION_TRAP_AND_SOFT_DISCARD,
2022 };
2023
2024 /* reg_hpkt_action
2025  * Action to perform on packet when trapped.
2026  * 0 - No action. Forward to CPU based on switching rules.
2027  * 1 - Trap to CPU (CPU receives sole copy).
2028  * 2 - Mirror to CPU (CPU receives a replica of the packet).
2029  * 3 - Discard.
2030  * 4 - Soft discard (allow other traps to act on the packet).
2031  * 5 - Trap and soft discard (allow other traps to overwrite this trap).
2032  * Access: RW
2033  *
2034  * Note: Must be set to 0 (forward) for event trap IDs, as they are already
2035  * addressed to the CPU.
2036  */
2037 MLXSW_ITEM32(reg, hpkt, action, 0x00, 20, 3);
2038
2039 /* reg_hpkt_trap_group
2040  * Trap group to associate the trap with.
2041  * Access: RW
2042  */
2043 MLXSW_ITEM32(reg, hpkt, trap_group, 0x00, 12, 6);
2044
2045 /* reg_hpkt_trap_id
2046  * Trap ID.
2047  * Access: Index
2048  *
2049  * Note: A trap ID can only be associated with a single trap group. The device
2050  * will associate the trap ID with the last trap group configured.
2051  */
2052 MLXSW_ITEM32(reg, hpkt, trap_id, 0x00, 0, 9);
2053
2054 enum {
2055         MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT,
2056         MLXSW_REG_HPKT_CTRL_PACKET_NO_BUFFER,
2057         MLXSW_REG_HPKT_CTRL_PACKET_USE_BUFFER,
2058 };
2059
2060 /* reg_hpkt_ctrl
2061  * Configure dedicated buffer resources for control packets.
2062  * 0 - Keep factory defaults.
2063  * 1 - Do not use control buffer for this trap ID.
2064  * 2 - Use control buffer for this trap ID.
2065  * Access: RW
2066  */
2067 MLXSW_ITEM32(reg, hpkt, ctrl, 0x04, 16, 2);
2068
2069 static inline void mlxsw_reg_hpkt_pack(char *payload, u8 action, u16 trap_id)
2070 {
2071         enum mlxsw_reg_htgt_trap_group trap_group;
2072
2073         MLXSW_REG_ZERO(hpkt, payload);
2074         mlxsw_reg_hpkt_ack_set(payload, MLXSW_REG_HPKT_ACK_NOT_REQUIRED);
2075         mlxsw_reg_hpkt_action_set(payload, action);
2076         switch (trap_id) {
2077         case MLXSW_TRAP_ID_ETHEMAD:
2078         case MLXSW_TRAP_ID_PUDE:
2079                 trap_group = MLXSW_REG_HTGT_TRAP_GROUP_EMAD;
2080                 break;
2081         default:
2082                 trap_group = MLXSW_REG_HTGT_TRAP_GROUP_RX;
2083                 break;
2084         }
2085         mlxsw_reg_hpkt_trap_group_set(payload, trap_group);
2086         mlxsw_reg_hpkt_trap_id_set(payload, trap_id);
2087         mlxsw_reg_hpkt_ctrl_set(payload, MLXSW_REG_HPKT_CTRL_PACKET_DEFAULT);
2088 }
2089
2090 /* SBPR - Shared Buffer Pools Register
2091  * -----------------------------------
2092  * The SBPR configures and retrieves the shared buffer pools and configuration.
2093  */
2094 #define MLXSW_REG_SBPR_ID 0xB001
2095 #define MLXSW_REG_SBPR_LEN 0x14
2096
2097 static const struct mlxsw_reg_info mlxsw_reg_sbpr = {
2098         .id = MLXSW_REG_SBPR_ID,
2099         .len = MLXSW_REG_SBPR_LEN,
2100 };
2101
2102 enum mlxsw_reg_sbpr_dir {
2103         MLXSW_REG_SBPR_DIR_INGRESS,
2104         MLXSW_REG_SBPR_DIR_EGRESS,
2105 };
2106
2107 /* reg_sbpr_dir
2108  * Direction.
2109  * Access: Index
2110  */
2111 MLXSW_ITEM32(reg, sbpr, dir, 0x00, 24, 2);
2112
2113 /* reg_sbpr_pool
2114  * Pool index.
2115  * Access: Index
2116  */
2117 MLXSW_ITEM32(reg, sbpr, pool, 0x00, 0, 4);
2118
2119 /* reg_sbpr_size
2120  * Pool size in buffer cells.
2121  * Access: RW
2122  */
2123 MLXSW_ITEM32(reg, sbpr, size, 0x04, 0, 24);
2124
2125 enum mlxsw_reg_sbpr_mode {
2126         MLXSW_REG_SBPR_MODE_STATIC,
2127         MLXSW_REG_SBPR_MODE_DYNAMIC,
2128 };
2129
2130 /* reg_sbpr_mode
2131  * Pool quota calculation mode.
2132  * Access: RW
2133  */
2134 MLXSW_ITEM32(reg, sbpr, mode, 0x08, 0, 4);
2135
2136 static inline void mlxsw_reg_sbpr_pack(char *payload, u8 pool,
2137                                        enum mlxsw_reg_sbpr_dir dir,
2138                                        enum mlxsw_reg_sbpr_mode mode, u32 size)
2139 {
2140         MLXSW_REG_ZERO(sbpr, payload);
2141         mlxsw_reg_sbpr_pool_set(payload, pool);
2142         mlxsw_reg_sbpr_dir_set(payload, dir);
2143         mlxsw_reg_sbpr_mode_set(payload, mode);
2144         mlxsw_reg_sbpr_size_set(payload, size);
2145 }
2146
2147 /* SBCM - Shared Buffer Class Management Register
2148  * ----------------------------------------------
2149  * The SBCM register configures and retrieves the shared buffer allocation
2150  * and configuration according to Port-PG, including the binding to pool
2151  * and definition of the associated quota.
2152  */
2153 #define MLXSW_REG_SBCM_ID 0xB002
2154 #define MLXSW_REG_SBCM_LEN 0x28
2155
2156 static const struct mlxsw_reg_info mlxsw_reg_sbcm = {
2157         .id = MLXSW_REG_SBCM_ID,
2158         .len = MLXSW_REG_SBCM_LEN,
2159 };
2160
2161 /* reg_sbcm_local_port
2162  * Local port number.
2163  * For Ingress: excludes CPU port and Router port
2164  * For Egress: excludes IP Router
2165  * Access: Index
2166  */
2167 MLXSW_ITEM32(reg, sbcm, local_port, 0x00, 16, 8);
2168
2169 /* reg_sbcm_pg_buff
2170  * PG buffer - Port PG (dir=ingress) / traffic class (dir=egress)
2171  * For PG buffer: range is 0..cap_max_pg_buffers - 1
2172  * For traffic class: range is 0..cap_max_tclass - 1
2173  * Note that when traffic class is in MC aware mode then the traffic
2174  * classes which are MC aware cannot be configured.
2175  * Access: Index
2176  */
2177 MLXSW_ITEM32(reg, sbcm, pg_buff, 0x00, 8, 6);
2178
2179 enum mlxsw_reg_sbcm_dir {
2180         MLXSW_REG_SBCM_DIR_INGRESS,
2181         MLXSW_REG_SBCM_DIR_EGRESS,
2182 };
2183
2184 /* reg_sbcm_dir
2185  * Direction.
2186  * Access: Index
2187  */
2188 MLXSW_ITEM32(reg, sbcm, dir, 0x00, 0, 2);
2189
2190 /* reg_sbcm_min_buff
2191  * Minimum buffer size for the limiter, in cells.
2192  * Access: RW
2193  */
2194 MLXSW_ITEM32(reg, sbcm, min_buff, 0x18, 0, 24);
2195
2196 /* reg_sbcm_max_buff
2197  * When the pool associated to the port-pg/tclass is configured to
2198  * static, Maximum buffer size for the limiter configured in cells.
2199  * When the pool associated to the port-pg/tclass is configured to
2200  * dynamic, the max_buff holds the "alpha" parameter, supporting
2201  * the following values:
2202  * 0: 0
2203  * i: (1/128)*2^(i-1), for i=1..14
2204  * 0xFF: Infinity
2205  * Access: RW
2206  */
2207 MLXSW_ITEM32(reg, sbcm, max_buff, 0x1C, 0, 24);
2208
2209 /* reg_sbcm_pool
2210  * Association of the port-priority to a pool.
2211  * Access: RW
2212  */
2213 MLXSW_ITEM32(reg, sbcm, pool, 0x24, 0, 4);
2214
2215 static inline void mlxsw_reg_sbcm_pack(char *payload, u8 local_port, u8 pg_buff,
2216                                        enum mlxsw_reg_sbcm_dir dir,
2217                                        u32 min_buff, u32 max_buff, u8 pool)
2218 {
2219         MLXSW_REG_ZERO(sbcm, payload);
2220         mlxsw_reg_sbcm_local_port_set(payload, local_port);
2221         mlxsw_reg_sbcm_pg_buff_set(payload, pg_buff);
2222         mlxsw_reg_sbcm_dir_set(payload, dir);
2223         mlxsw_reg_sbcm_min_buff_set(payload, min_buff);
2224         mlxsw_reg_sbcm_max_buff_set(payload, max_buff);
2225         mlxsw_reg_sbcm_pool_set(payload, pool);
2226 }
2227
2228 /* SBPM - Shared Buffer Class Management Register
2229  * ----------------------------------------------
2230  * The SBPM register configures and retrieves the shared buffer allocation
2231  * and configuration according to Port-Pool, including the definition
2232  * of the associated quota.
2233  */
2234 #define MLXSW_REG_SBPM_ID 0xB003
2235 #define MLXSW_REG_SBPM_LEN 0x28
2236
2237 static const struct mlxsw_reg_info mlxsw_reg_sbpm = {
2238         .id = MLXSW_REG_SBPM_ID,
2239         .len = MLXSW_REG_SBPM_LEN,
2240 };
2241
2242 /* reg_sbpm_local_port
2243  * Local port number.
2244  * For Ingress: excludes CPU port and Router port
2245  * For Egress: excludes IP Router
2246  * Access: Index
2247  */
2248 MLXSW_ITEM32(reg, sbpm, local_port, 0x00, 16, 8);
2249
2250 /* reg_sbpm_pool
2251  * The pool associated to quota counting on the local_port.
2252  * Access: Index
2253  */
2254 MLXSW_ITEM32(reg, sbpm, pool, 0x00, 8, 4);
2255
2256 enum mlxsw_reg_sbpm_dir {
2257         MLXSW_REG_SBPM_DIR_INGRESS,
2258         MLXSW_REG_SBPM_DIR_EGRESS,
2259 };
2260
2261 /* reg_sbpm_dir
2262  * Direction.
2263  * Access: Index
2264  */
2265 MLXSW_ITEM32(reg, sbpm, dir, 0x00, 0, 2);
2266
2267 /* reg_sbpm_min_buff
2268  * Minimum buffer size for the limiter, in cells.
2269  * Access: RW
2270  */
2271 MLXSW_ITEM32(reg, sbpm, min_buff, 0x18, 0, 24);
2272
2273 /* reg_sbpm_max_buff
2274  * When the pool associated to the port-pg/tclass is configured to
2275  * static, Maximum buffer size for the limiter configured in cells.
2276  * When the pool associated to the port-pg/tclass is configured to
2277  * dynamic, the max_buff holds the "alpha" parameter, supporting
2278  * the following values:
2279  * 0: 0
2280  * i: (1/128)*2^(i-1), for i=1..14
2281  * 0xFF: Infinity
2282  * Access: RW
2283  */
2284 MLXSW_ITEM32(reg, sbpm, max_buff, 0x1C, 0, 24);
2285
2286 static inline void mlxsw_reg_sbpm_pack(char *payload, u8 local_port, u8 pool,
2287                                        enum mlxsw_reg_sbpm_dir dir,
2288                                        u32 min_buff, u32 max_buff)
2289 {
2290         MLXSW_REG_ZERO(sbpm, payload);
2291         mlxsw_reg_sbpm_local_port_set(payload, local_port);
2292         mlxsw_reg_sbpm_pool_set(payload, pool);
2293         mlxsw_reg_sbpm_dir_set(payload, dir);
2294         mlxsw_reg_sbpm_min_buff_set(payload, min_buff);
2295         mlxsw_reg_sbpm_max_buff_set(payload, max_buff);
2296 }
2297
2298 /* SBMM - Shared Buffer Multicast Management Register
2299  * --------------------------------------------------
2300  * The SBMM register configures and retrieves the shared buffer allocation
2301  * and configuration for MC packets according to Switch-Priority, including
2302  * the binding to pool and definition of the associated quota.
2303  */
2304 #define MLXSW_REG_SBMM_ID 0xB004
2305 #define MLXSW_REG_SBMM_LEN 0x28
2306
2307 static const struct mlxsw_reg_info mlxsw_reg_sbmm = {
2308         .id = MLXSW_REG_SBMM_ID,
2309         .len = MLXSW_REG_SBMM_LEN,
2310 };
2311
2312 /* reg_sbmm_prio
2313  * Switch Priority.
2314  * Access: Index
2315  */
2316 MLXSW_ITEM32(reg, sbmm, prio, 0x00, 8, 4);
2317
2318 /* reg_sbmm_min_buff
2319  * Minimum buffer size for the limiter, in cells.
2320  * Access: RW
2321  */
2322 MLXSW_ITEM32(reg, sbmm, min_buff, 0x18, 0, 24);
2323
2324 /* reg_sbmm_max_buff
2325  * When the pool associated to the port-pg/tclass is configured to
2326  * static, Maximum buffer size for the limiter configured in cells.
2327  * When the pool associated to the port-pg/tclass is configured to
2328  * dynamic, the max_buff holds the "alpha" parameter, supporting
2329  * the following values:
2330  * 0: 0
2331  * i: (1/128)*2^(i-1), for i=1..14
2332  * 0xFF: Infinity
2333  * Access: RW
2334  */
2335 MLXSW_ITEM32(reg, sbmm, max_buff, 0x1C, 0, 24);
2336
2337 /* reg_sbmm_pool
2338  * Association of the port-priority to a pool.
2339  * Access: RW
2340  */
2341 MLXSW_ITEM32(reg, sbmm, pool, 0x24, 0, 4);
2342
2343 static inline void mlxsw_reg_sbmm_pack(char *payload, u8 prio, u32 min_buff,
2344                                        u32 max_buff, u8 pool)
2345 {
2346         MLXSW_REG_ZERO(sbmm, payload);
2347         mlxsw_reg_sbmm_prio_set(payload, prio);
2348         mlxsw_reg_sbmm_min_buff_set(payload, min_buff);
2349         mlxsw_reg_sbmm_max_buff_set(payload, max_buff);
2350         mlxsw_reg_sbmm_pool_set(payload, pool);
2351 }
2352
2353 static inline const char *mlxsw_reg_id_str(u16 reg_id)
2354 {
2355         switch (reg_id) {
2356         case MLXSW_REG_SGCR_ID:
2357                 return "SGCR";
2358         case MLXSW_REG_SPAD_ID:
2359                 return "SPAD";
2360         case MLXSW_REG_SSPR_ID:
2361                 return "SSPR";
2362         case MLXSW_REG_SFDAT_ID:
2363                 return "SFDAT";
2364         case MLXSW_REG_SFD_ID:
2365                 return "SFD";
2366         case MLXSW_REG_SFN_ID:
2367                 return "SFN";
2368         case MLXSW_REG_SPMS_ID:
2369                 return "SPMS";
2370         case MLXSW_REG_SPVID_ID:
2371                 return "SPVID";
2372         case MLXSW_REG_SPVM_ID:
2373                 return "SPVM";
2374         case MLXSW_REG_SFGC_ID:
2375                 return "SFGC";
2376         case MLXSW_REG_SFTR_ID:
2377                 return "SFTR";
2378         case MLXSW_REG_SPMLR_ID:
2379                 return "SPMLR";
2380         case MLXSW_REG_SVFA_ID:
2381                 return "SVFA";
2382         case MLXSW_REG_SVPE_ID:
2383                 return "SVPE";
2384         case MLXSW_REG_SFMR_ID:
2385                 return "SFMR";
2386         case MLXSW_REG_SPVMLR_ID:
2387                 return "SPVMLR";
2388         case MLXSW_REG_PMLP_ID:
2389                 return "PMLP";
2390         case MLXSW_REG_PMTU_ID:
2391                 return "PMTU";
2392         case MLXSW_REG_PTYS_ID:
2393                 return "PTYS";
2394         case MLXSW_REG_PPAD_ID:
2395                 return "PPAD";
2396         case MLXSW_REG_PAOS_ID:
2397                 return "PAOS";
2398         case MLXSW_REG_PPCNT_ID:
2399                 return "PPCNT";
2400         case MLXSW_REG_PBMC_ID:
2401                 return "PBMC";
2402         case MLXSW_REG_PSPA_ID:
2403                 return "PSPA";
2404         case MLXSW_REG_HTGT_ID:
2405                 return "HTGT";
2406         case MLXSW_REG_HPKT_ID:
2407                 return "HPKT";
2408         case MLXSW_REG_SBPR_ID:
2409                 return "SBPR";
2410         case MLXSW_REG_SBCM_ID:
2411                 return "SBCM";
2412         case MLXSW_REG_SBPM_ID:
2413                 return "SBPM";
2414         case MLXSW_REG_SBMM_ID:
2415                 return "SBMM";
2416         default:
2417                 return "*UNKNOWN*";
2418         }
2419 }
2420
2421 /* PUDE - Port Up / Down Event
2422  * ---------------------------
2423  * Reports the operational state change of a port.
2424  */
2425 #define MLXSW_REG_PUDE_LEN 0x10
2426
2427 /* reg_pude_swid
2428  * Switch partition ID with which to associate the port.
2429  * Access: Index
2430  */
2431 MLXSW_ITEM32(reg, pude, swid, 0x00, 24, 8);
2432
2433 /* reg_pude_local_port
2434  * Local port number.
2435  * Access: Index
2436  */
2437 MLXSW_ITEM32(reg, pude, local_port, 0x00, 16, 8);
2438
2439 /* reg_pude_admin_status
2440  * Port administrative state (the desired state).
2441  * 1 - Up.
2442  * 2 - Down.
2443  * 3 - Up once. This means that in case of link failure, the port won't go
2444  *     into polling mode, but will wait to be re-enabled by software.
2445  * 4 - Disabled by system. Can only be set by hardware.
2446  * Access: RO
2447  */
2448 MLXSW_ITEM32(reg, pude, admin_status, 0x00, 8, 4);
2449
2450 /* reg_pude_oper_status
2451  * Port operatioanl state.
2452  * 1 - Up.
2453  * 2 - Down.
2454  * 3 - Down by port failure. This means that the device will not let the
2455  *     port up again until explicitly specified by software.
2456  * Access: RO
2457  */
2458 MLXSW_ITEM32(reg, pude, oper_status, 0x00, 0, 4);
2459
2460 #endif