drivers/net/arcnet/Kconfig

   1 #
   2 # Arcnet configuration
   3 #
   4
   5 menuconfig ARCNET
   6         depends on NETDEVICES && (ISA || PCI || PCMCIA)
   7         tristate "ARCnet support"
   8         ---help---
   9           If you have a network card of this type, say Y and check out the
  10           (arguably) beautiful poetry in
  11           <file:Documentation/networking/arcnet.txt>.
  12
  13           You need both this driver, and the driver for the particular ARCnet
  14           chipset of your card. If you don't know, then it's probably a
  15           COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
  16           support" below.
  17
  18           You might also want to have a look at the Ethernet-HOWTO, available
  19           from <http://www.tldp.org/docs.html#howto>(even though ARCnet
  20           is not really Ethernet).
  21
  22           To compile this driver as a module, choose M here. The module will
  23           be called arcnet.
  24
  25 if ARCNET
  26
  27 config ARCNET_1201
  28         tristate "Enable standard ARCNet packet format (RFC 1201)"
  29         help
  30           This allows you to use RFC1201 with your ARCnet card via the virtual
  31           arc0 device.  You need to say Y here to communicate with
  32           industry-standard RFC1201 implementations, like the arcether.com
  33           packet driver or most DOS/Windows ODI drivers.  Please read the
  34           ARCnet documentation in <file:Documentation/networking/arcnet.txt>
  35           for more information about using arc0.
  36
  37 config ARCNET_1051
  38         tristate "Enable old ARCNet packet format (RFC 1051)"
  39         ---help---
  40           This allows you to use RFC1051 with your ARCnet card via the virtual
  41           arc0s device. You only need arc0s if you want to talk to ARCnet
  42           software complying with the "old" standard, specifically, the DOS
  43           arcnet.com packet driver, Amigas running AmiTCP, and some variants
  44           of NetBSD. You do not need to say Y here to communicate with
  45           industry-standard RFC1201 implementations, like the arcether.com
  46           packet driver or most DOS/Windows ODI drivers. RFC1201 is included
  47           automatically as the arc0 device. Please read the ARCnet
  48           documentation in <file:Documentation/networking/arcnet.txt> for more
  49           information about using arc0e and arc0s.
  50
  51 config ARCNET_RAW
  52         tristate "Enable raw mode packet interface"
  53         help
  54           ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
  55           to work unless talking to a copy of the same Linux arcnet driver,
  56           but perhaps marginally faster in that case.
  57
  58 config ARCNET_CAP
  59         tristate "Enable CAP mode packet interface"
  60         help
  61           ARCnet "cap mode" packet encapsulation. Used to get the hardware
  62           acknowledge back to userspace. After the initial protocol byte every
  63           packet is stuffed with an extra 4 byte "cookie" which doesn't
  64           actually appear on the network. After transmit the driver will send
  65           back a packet with protocol byte 0 containing the status of the
  66           transmission:
  67              0=no hardware acknowledge
  68              1=excessive nak
  69              2=transmission accepted by the receiver hardware
  70
  71           Received packets are also stuffed with the extra 4 bytes but it will
  72           be random data.
  73
  74           Cap only listens to protocol 1-8.
  75
  76 config ARCNET_COM90xx
  77         tristate "ARCnet COM90xx (normal) chipset driver"
  78         help
  79           This is the chipset driver for the standard COM90xx cards. If you
  80           have always used the old ARCnet driver without knowing what type of
  81           card you had, this is probably the one for you.
  82
  83           To compile this driver as a module, choose M here. The module will
  84           be called com90xx.
  85
  86 config ARCNET_COM90xxIO
  87         tristate "ARCnet COM90xx (IO mapped) chipset driver"
  88         ---help---
  89           This is the chipset driver for the COM90xx cards, using them in
  90           IO-mapped mode instead of memory-mapped mode. This is slower than
  91           the normal driver. Only use it if your card doesn't support shared
  92           memory.
  93
  94           To compile this driver as a module, choose M here. The module will
  95           be called com90io.
  96
  97 config ARCNET_RIM_I
  98         tristate "ARCnet COM90xx (RIM I) chipset driver"
  99         ---help---
 100           This is yet another chipset driver for the COM90xx cards, but this
 101           time only using memory-mapped mode, and no IO ports at all. This
 102           driver is completely untested, so if you have one of these cards,
 103           please mail <dwmw2@infradead.org>, especially if it works!
 104
 105           To compile this driver as a module, choose M here. The module will
 106           be called arc-rimi.
 107
 108 config ARCNET_COM20020
 109         tristate "ARCnet COM20020 chipset driver"
 110         help
 111           This is the driver for the new COM20020 chipset. It supports such
 112           things as promiscuous mode, so packet sniffing is possible, and
 113           extra diagnostic information.
 114
 115           To compile this driver as a module, choose M here. The module will
 116           be called com20020.
 117
 118 config ARCNET_COM20020_ISA
 119         tristate "Support for COM20020 on ISA"
 120         depends on ARCNET_COM20020 && ISA
 121
 122 config ARCNET_COM20020_PCI
 123         tristate "Support for COM20020 on PCI"
 124         depends on ARCNET_COM20020 && PCI
 125
 126 config ARCNET_COM20020_CS
 127         tristate "COM20020 ARCnet PCMCIA support"
 128         depends on ARCNET_COM20020 && PCMCIA
 129         help
 130           Say Y here if you intend to attach this type of ARCnet PCMCIA card
 131           to your computer.
 132
 133           To compile this driver as a module, choose M here: the module will be
 134           called com20020_cs.  If unsure, say N.
 135
 136 endif # ARCNET