drivers/mmc/host/sdhci-pxav3.c

   1 /*
   2  * Copyright (C) 2010 Marvell International Ltd.
   3  *              Zhangfei Gao <zhangfei.gao@marvell.com>
   4  *              Kevin Wang <dwang4@marvell.com>
   5  *              Mingwei Wang <mwwang@marvell.com>
   6  *              Philip Rakity <prakity@marvell.com>
   7  *              Mark Brown <markb@marvell.com>
   8  *
   9  * This software is licensed under the terms of the GNU General Public
  10  * License version 2, as published by the Free Software Foundation, and
  11  * may be copied, distributed, and modified under those terms.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  */
  19 #include <linux/err.h>
  20 #include <linux/init.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/clk.h>
  23 #include <linux/io.h>
  24 #include <linux/gpio.h>
  25 #include <linux/mmc/card.h>
  26 #include <linux/mmc/host.h>
  27 #include <linux/platform_data/pxa_sdhci.h>
  28 #include <linux/slab.h>
  29 #include <linux/delay.h>
  30 #include "sdhci.h"
  31 #include "sdhci-pltfm.h"
  32
  33 #define SD_CLOCK_BURST_SIZE_SETUP               0x10A
  34 #define SDCLK_SEL       0x100
  35 #define SDCLK_DELAY_SHIFT       9
  36 #define SDCLK_DELAY_MASK        0x1f
  37
  38 #define SD_CFG_FIFO_PARAM       0x100
  39 #define SDCFG_GEN_PAD_CLK_ON    (1<<6)
  40 #define SDCFG_GEN_PAD_CLK_CNT_MASK      0xFF
  41 #define SDCFG_GEN_PAD_CLK_CNT_SHIFT     24
  42
  43 #define SD_SPI_MODE          0x108
  44 #define SD_CE_ATA_1          0x10C
  45
  46 #define SD_CE_ATA_2          0x10E
  47 #define SDCE_MISC_INT           (1<<2)
  48 #define SDCE_MISC_INT_EN        (1<<1)
  49
  50 static void pxav3_set_private_registers(struct sdhci_host *host, u8 mask)
  51 {
  52         struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
  53         struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
  54
  55         if (mask == SDHCI_RESET_ALL) {
  56                 /*
  57                  * tune timing of read data/command when crc error happen
  58                  * no performance impact
  59                  */
  60                 if (pdata && 0 != pdata->clk_delay_cycles) {
  61                         u16 tmp;
  62
  63                         tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
  64                         tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK)
  65                                 << SDCLK_DELAY_SHIFT;
  66                         tmp |= SDCLK_SEL;
  67                         writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP);
  68                 }
  69         }
  70 }
  71
  72 #define MAX_WAIT_COUNT 5
  73 static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
  74 {
  75         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
  76         struct sdhci_pxa *pxa = pltfm_host->priv;
  77         u16 tmp;
  78         int count;
  79
  80         if (pxa->power_mode == MMC_POWER_UP
  81                         && power_mode == MMC_POWER_ON) {
  82
  83                 dev_dbg(mmc_dev(host->mmc),
  84                                 "%s: slot->power_mode = %d,"
  85                                 "ios->power_mode = %d\n",
  86                                 __func__,
  87                                 pxa->power_mode,
  88                                 power_mode);
  89
  90                 /* set we want notice of when 74 clocks are sent */
  91                 tmp = readw(host->ioaddr + SD_CE_ATA_2);
  92                 tmp |= SDCE_MISC_INT_EN;
  93                 writew(tmp, host->ioaddr + SD_CE_ATA_2);
  94
  95                 /* start sending the 74 clocks */
  96                 tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM);
  97                 tmp |= SDCFG_GEN_PAD_CLK_ON;
  98                 writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM);
  99
 100                 /* slowest speed is about 100KHz or 10usec per clock */
 101                 udelay(740);
 102                 count = 0;
 103
 104                 while (count++ < MAX_WAIT_COUNT) {
 105                         if ((readw(host->ioaddr + SD_CE_ATA_2)
 106                                                 & SDCE_MISC_INT) == 0)
 107                                 break;
 108                         udelay(10);
 109                 }
 110
 111                 if (count == MAX_WAIT_COUNT)
 112                         dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n");
 113
 114                 /* clear the interrupt bit if posted */
 115                 tmp = readw(host->ioaddr + SD_CE_ATA_2);
 116                 tmp |= SDCE_MISC_INT;
 117                 writew(tmp, host->ioaddr + SD_CE_ATA_2);
 118         }
 119         pxa->power_mode = power_mode;
 120 }
 121
 122 static int pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 123 {
 124         u16 ctrl_2;
 125
 126         /*
 127          * Set V18_EN -- UHS modes do not work without this.
 128          * does not change signaling voltage
 129          */
 130         ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 131
 132         /* Select Bus Speed Mode for host */
 133         ctrl_2 &= ~SDHCI_CTRL_UHS_MASK;
 134         switch (uhs) {
 135         case MMC_TIMING_UHS_SDR12:
 136                 ctrl_2 |= SDHCI_CTRL_UHS_SDR12;
 137                 break;
 138         case MMC_TIMING_UHS_SDR25:
 139                 ctrl_2 |= SDHCI_CTRL_UHS_SDR25;
 140                 break;
 141         case MMC_TIMING_UHS_SDR50:
 142                 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180;
 143                 break;
 144         case MMC_TIMING_UHS_SDR104:
 145                 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
 146                 break;
 147         case MMC_TIMING_UHS_DDR50:
 148                 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
 149                 break;
 150         }
 151
 152         sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
 153         dev_dbg(mmc_dev(host->mmc),
 154                 "%s uhs = %d, ctrl_2 = %04X\n",
 155                 __func__, uhs, ctrl_2);
 156
 157         return 0;
 158 }
 159
 160 static struct sdhci_ops pxav3_sdhci_ops = {
 161         .platform_reset_exit = pxav3_set_private_registers,
 162         .set_uhs_signaling = pxav3_set_uhs_signaling,
 163         .platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 164 };
 165
 166 static int __devinit sdhci_pxav3_probe(struct platform_device *pdev)
 167 {
 168         struct sdhci_pltfm_host *pltfm_host;
 169         struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 170         struct device *dev = &pdev->dev;
 171         struct sdhci_host *host = NULL;
 172         struct sdhci_pxa *pxa = NULL;
 173         int ret;
 174         struct clk *clk;
 175
 176         pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
 177         if (!pxa)
 178                 return -ENOMEM;
 179
 180         host = sdhci_pltfm_init(pdev, NULL);
 181         if (IS_ERR(host)) {
 182                 kfree(pxa);
 183                 return PTR_ERR(host);
 184         }
 185         pltfm_host = sdhci_priv(host);
 186         pltfm_host->priv = pxa;
 187
 188         clk = clk_get(dev, "PXA-SDHCLK");
 189         if (IS_ERR(clk)) {
 190                 dev_err(dev, "failed to get io clock\n");
 191                 ret = PTR_ERR(clk);
 192                 goto err_clk_get;
 193         }
 194         pltfm_host->clk = clk;
 195         clk_enable(clk);
 196
 197         host->quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
 198                 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
 199                 | SDHCI_QUIRK_32BIT_ADMA_SIZE;
 200
 201         /* enable 1/8V DDR capable */
 202         host->mmc->caps |= MMC_CAP_1_8V_DDR;
 203
 204         if (pdata) {
 205                 if (pdata->flags & PXA_FLAG_CARD_PERMANENT) {
 206                         /* on-chip device */
 207                         host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
 208                         host->mmc->caps |= MMC_CAP_NONREMOVABLE;
 209                 }
 210
 211                 /* If slot design supports 8 bit data, indicate this to MMC. */
 212                 if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
 213                         host->mmc->caps |= MMC_CAP_8_BIT_DATA;
 214
 215                 if (pdata->quirks)
 216                         host->quirks |= pdata->quirks;
 217                 if (pdata->host_caps)
 218                         host->mmc->caps |= pdata->host_caps;
 219                 if (pdata->pm_caps)
 220                         host->mmc->pm_caps |= pdata->pm_caps;
 221         }
 222
 223         host->ops = &pxav3_sdhci_ops;
 224
 225         ret = sdhci_add_host(host);
 226         if (ret) {
 227                 dev_err(&pdev->dev, "failed to add host\n");
 228                 goto err_add_host;
 229         }
 230
 231         platform_set_drvdata(pdev, host);
 232
 233         return 0;
 234
 235 err_add_host:
 236         clk_disable(clk);
 237         clk_put(clk);
 238 err_clk_get:
 239         sdhci_pltfm_free(pdev);
 240         kfree(pxa);
 241         return ret;
 242 }
 243
 244 static int __devexit sdhci_pxav3_remove(struct platform_device *pdev)
 245 {
 246         struct sdhci_host *host = platform_get_drvdata(pdev);
 247         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 248         struct sdhci_pxa *pxa = pltfm_host->priv;
 249
 250         sdhci_remove_host(host, 1);
 251
 252         clk_disable(pltfm_host->clk);
 253         clk_put(pltfm_host->clk);
 254         sdhci_pltfm_free(pdev);
 255         kfree(pxa);
 256
 257         platform_set_drvdata(pdev, NULL);
 258
 259         return 0;
 260 }
 261
 262 static struct platform_driver sdhci_pxav3_driver = {
 263         .driver         = {
 264                 .name   = "sdhci-pxav3",
 265                 .owner  = THIS_MODULE,
 266         },
 267         .probe          = sdhci_pxav3_probe,
 268         .remove         = __devexit_p(sdhci_pxav3_remove),
 269 #ifdef CONFIG_PM
 270         .suspend        = sdhci_pltfm_suspend,
 271         .resume         = sdhci_pltfm_resume,
 272 #endif
 273 };
 274 static int __init sdhci_pxav3_init(void)
 275 {
 276         return platform_driver_register(&sdhci_pxav3_driver);
 277 }
 278
 279 static void __exit sdhci_pxav3_exit(void)
 280 {
 281         platform_driver_unregister(&sdhci_pxav3_driver);
 282 }
 283
 284 module_init(sdhci_pxav3_init);
 285 module_exit(sdhci_pxav3_exit);
 286
 287 MODULE_DESCRIPTION("SDHCI driver for pxav3");
 288 MODULE_AUTHOR("Marvell International Ltd.");
 289 MODULE_LICENSE("GPL v2");
 290