drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_SM501
  13         tristate "Support for Silicon Motion SM501"
  14          ---help---
  15           This is the core driver for the Silicon Motion SM501 multimedia
  16           companion chip. This device is a multifunction device which may
  17           provide numerous interfaces including USB host controller, USB gadget,
  18           asynchronous serial ports, audio functions, and a dual display video
  19           interface. The device may be connected by PCI or local bus with
  20           varying functions enabled.
  21
  22 config MFD_SM501_GPIO
  23         bool "Export GPIO via GPIO layer"
  24         depends on MFD_SM501 && GPIOLIB
  25          ---help---
  26          This option uses the gpio library layer to export the 64 GPIO
  27          lines on the SM501. The platform data is used to supply the
  28          base number for the first GPIO line to register.
  29
  30 config MFD_ASIC3
  31         bool "Support for Compaq ASIC3"
  32         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  33         select MFD_CORE
  34          ---help---
  35           This driver supports the ASIC3 multifunction chip found on many
  36           PDAs (mainly iPAQ and HTC based ones)
  37
  38 config MFD_DM355EVM_MSP
  39         bool "DaVinci DM355 EVM microcontroller"
  40         depends on I2C && MACH_DAVINCI_DM355_EVM
  41         help
  42           This driver supports the MSP430 microcontroller used on these
  43           boards.  MSP430 firmware manages resets and power sequencing,
  44           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  45
  46 config HTC_EGPIO
  47         bool "HTC EGPIO support"
  48         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  49         help
  50             This driver supports the CPLD egpio chip present on
  51             several HTC phones.  It provides basic support for input
  52             pins, output pins, and irqs.
  53
  54 config HTC_PASIC3
  55         tristate "HTC PASIC3 LED/DS1WM chip support"
  56         select MFD_CORE
  57         help
  58           This core driver provides register access for the LED/DS1WM
  59           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  60           HTC Magician devices, respectively. Actual functionality is
  61           handled by the leds-pasic3 and ds1wm drivers.
  62
  63 config UCB1400_CORE
  64         tristate "Philips UCB1400 Core driver"
  65         depends on AC97_BUS
  66         depends on GPIOLIB
  67         help
  68           This enables support for the Philips UCB1400 core functions.
  69           The UCB1400 is an AC97 audio codec.
  70
  71           To compile this driver as a module, choose M here: the
  72           module will be called ucb1400_core.
  73
  74 config TPS65010
  75         tristate "TPS6501x Power Management chips"
  76         depends on I2C && GPIOLIB
  77         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
  78         help
  79           If you say yes here you get support for the TPS6501x series of
  80           Power Management chips.  These include voltage regulators,
  81           lithium ion/polymer battery charging, and other features that
  82           are often used in portable devices like cell phones and cameras.
  83
  84           This driver can also be built as a module.  If so, the module
  85           will be called tps65010.
  86
  87 config MENELAUS
  88         bool "Texas Instruments TWL92330/Menelaus PM chip"
  89         depends on I2C=y && ARCH_OMAP24XX
  90         help
  91           If you say yes here you get support for the Texas Instruments
  92           TWL92330/Menelaus Power Management chip. This include voltage
  93           regulators, Dual slot memory card transceivers, real-time clock
  94           and other features that are often used in portable devices like
  95           cell phones and PDAs.
  96
  97 config TWL4030_CORE
  98         bool "Texas Instruments TWL4030/TPS659x0 Support"
  99         depends on I2C=y && GENERIC_HARDIRQS
 100         help
 101           Say yes here if you have TWL4030 family chip on your board.
 102           This core driver provides register access and IRQ handling
 103           facilities, and registers devices for the various functions
 104           so that function-specific drivers can bind to them.
 105
 106           These multi-function chips are found on many OMAP2 and OMAP3
 107           boards, providing power management, RTC, GPIO, keypad, a
 108           high speed USB OTG transceiver, an audio codec (on most
 109           versions) and many other features.
 110
 111 config MFD_TMIO
 112         bool
 113         default n
 114
 115 config MFD_T7L66XB
 116         bool "Support Toshiba T7L66XB"
 117         depends on ARM && HAVE_CLK
 118         select MFD_CORE
 119         select MFD_TMIO
 120         help
 121           Support for Toshiba Mobile IO Controller T7L66XB
 122
 123 config MFD_TC6387XB
 124         bool "Support Toshiba TC6387XB"
 125         depends on ARM && HAVE_CLK
 126         select MFD_CORE
 127         select MFD_TMIO
 128         help
 129           Support for Toshiba Mobile IO Controller TC6387XB
 130
 131 config MFD_TC6393XB
 132         bool "Support Toshiba TC6393XB"
 133         depends on GPIOLIB && ARM
 134         select MFD_CORE
 135         select MFD_TMIO
 136         help
 137           Support for Toshiba Mobile IO Controller TC6393XB
 138
 139 config PMIC_DA903X
 140         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 141         depends on I2C=y
 142         help
 143           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 144           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 145           usually found on PXA processors-based platforms. This includes
 146           the I2C driver and the core APIs _only_, you have to select
 147           individual components like LCD backlight, voltage regulators,
 148           LEDs and battery-charger under the corresponding menus.
 149
 150 config MFD_WM8400
 151         tristate "Support Wolfson Microelectronics WM8400"
 152         select MFD_CORE
 153         depends on I2C
 154         help
 155           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 156           CODEC.  This driver provides common support for accessing
 157           the device, additional drivers must be enabled in order to use
 158           the functionality of the device.
 159
 160 config MFD_WM8350
 161         tristate
 162
 163 config MFD_WM8350_CONFIG_MODE_0
 164         bool
 165         depends on MFD_WM8350
 166
 167 config MFD_WM8350_CONFIG_MODE_1
 168         bool
 169         depends on MFD_WM8350
 170
 171 config MFD_WM8350_CONFIG_MODE_2
 172         bool
 173         depends on MFD_WM8350
 174
 175 config MFD_WM8350_CONFIG_MODE_3
 176         bool
 177         depends on MFD_WM8350
 178
 179 config MFD_WM8351_CONFIG_MODE_0
 180         bool
 181         depends on MFD_WM8350
 182
 183 config MFD_WM8351_CONFIG_MODE_1
 184         bool
 185         depends on MFD_WM8350
 186
 187 config MFD_WM8351_CONFIG_MODE_2
 188         bool
 189         depends on MFD_WM8350
 190
 191 config MFD_WM8351_CONFIG_MODE_3
 192         bool
 193         depends on MFD_WM8350
 194
 195 config MFD_WM8352_CONFIG_MODE_0
 196         bool
 197         depends on MFD_WM8350
 198
 199 config MFD_WM8352_CONFIG_MODE_1
 200         bool
 201         depends on MFD_WM8350
 202
 203 config MFD_WM8352_CONFIG_MODE_2
 204         bool
 205         depends on MFD_WM8350
 206
 207 config MFD_WM8352_CONFIG_MODE_3
 208         bool
 209         depends on MFD_WM8350
 210
 211 config MFD_WM8350_I2C
 212         tristate "Support Wolfson Microelectronics WM8350 with I2C"
 213         select MFD_WM8350
 214         depends on I2C
 215         help
 216           The WM8350 is an integrated audio and power management
 217           subsystem with watchdog and RTC functionality for embedded
 218           systems.  This option enables core support for the WM8350 with
 219           I2C as the control interface.  Additional options must be
 220           selected to enable support for the functionality of the chip.
 221
 222 config MFD_PCF50633
 223         tristate "Support for NXP PCF50633"
 224         depends on I2C
 225         help
 226           Say yes here if you have NXP PCF50633 chip on your board.
 227           This core driver provides register access and IRQ handling
 228           facilities, and registers devices for the various functions
 229           so that function-specific drivers can bind to them.
 230
 231 config PCF50633_ADC
 232         tristate "Support for NXP PCF50633 ADC"
 233         depends on MFD_PCF50633
 234         help
 235          Say yes here if you want to include support for ADC in the
 236          NXP PCF50633 chip.
 237
 238 config PCF50633_GPIO
 239         tristate "Support for NXP PCF50633 GPIO"
 240         depends on MFD_PCF50633
 241         help
 242          Say yes here if you want to include support GPIO for pins on
 243          the PCF50633 chip.
 244
 245 config AB3100_CORE
 246         tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 247         depends on I2C
 248         default y if ARCH_U300
 249         help
 250           Select this to enable the AB3100 Mixed Signal IC core
 251           functionality. This connects to a AB3100 on the I2C bus
 252           and expose a number of symbols needed for dependent devices
 253           to read and write registers and subscribe to events from
 254           this multi-functional IC. This is needed to use other features
 255           of the AB3100 such as battery-backed RTC, charging control,
 256           LEDs, vibrator, system power and temperature, power management
 257           and ALSA sound.
 258
 259 config EZX_PCAP
 260         bool "PCAP Support"
 261         depends on GENERIC_HARDIRQS && SPI_MASTER
 262         help
 263           This enables the PCAP ASIC present on EZX Phones. This is
 264           needed for MMC, TouchScreen, Sound, USB, etc..
 265
 266 endmenu
 267
 268 menu "Multimedia Capabilities Port drivers"
 269         depends on ARCH_SA1100
 270
 271 config MCP
 272         tristate
 273
 274 # Interface drivers
 275 config MCP_SA11X0
 276         tristate "Support SA11x0 MCP interface"
 277         depends on ARCH_SA1100
 278         select MCP
 279
 280 # Chip drivers
 281 config MCP_UCB1200
 282         tristate "Support for UCB1200 / UCB1300"
 283         depends on MCP
 284
 285 config MCP_UCB1200_TS
 286         tristate "Touchscreen interface support"
 287         depends on MCP_UCB1200 && INPUT
 288
 289 endmenu