[media] Stop using linux/version.h on most video drivers
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / media / video / w9966.c
1 /*
2 Winbond w9966cf Webcam parport driver.
3
4 Version 0.33
5
6 Copyright (C) 2001 Jakob Kemi <jakob.kemi@post.utfors.se>
7
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
12
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
17
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22 /*
23 Supported devices:
24 *Lifeview FlyCam Supra (using the Philips saa7111a chip)
25
26 Does any other model using the w9966 interface chip exist ?
27
28 Todo:
29
30 *Add a working EPP mode, since DMA ECP read isn't implemented
31 in the parport drivers. (That's why it's so sloow)
32
33 *Add support for other ccd-control chips than the saa7111
34 please send me feedback on what kind of chips you have.
35
36 *Add proper probing. I don't know what's wrong with the IEEE1284
37 parport drivers but (IEEE1284_MODE_NIBBLE|IEEE1284_DEVICE_ID)
38 and nibble read seems to be broken for some peripherals.
39
40 *Add probing for onboard SRAM, port directions etc. (if possible)
41
42 *Add support for the hardware compressed modes (maybe using v4l2)
43
44 *Fix better support for the capture window (no skewed images, v4l
45 interface to capt. window)
46
47 *Probably some bugs that I don't know of
48
49 Please support me by sending feedback!
50
51 Changes:
52
53 Alan Cox: Removed RGB mode for kernel merge, added THIS_MODULE
54 and owner support for newer module locks
55 */
56
57 #include <linux/module.h>
58 #include <linux/init.h>
59 #include <linux/delay.h>
60 #include <linux/videodev2.h>
61 #include <linux/slab.h>
62 #include <media/v4l2-common.h>
63 #include <media/v4l2-ioctl.h>
64 #include <media/v4l2-device.h>
65 #include <linux/parport.h>
66
67 /*#define DEBUG*/ /* Undef me for production */
68
69 #ifdef DEBUG
70 #define DPRINTF(x, a...) printk(KERN_DEBUG "W9966: %s(): "x, __func__ , ##a)
71 #else
72 #define DPRINTF(x...)
73 #endif
74
75 /*
76 * Defines, simple typedefs etc.
77 */
78
79 #define W9966_DRIVERNAME "W9966CF Webcam"
80 #define W9966_MAXCAMS 4 /* Maximum number of cameras */
81 #define W9966_RBUFFER 2048 /* Read buffer (must be an even number) */
82 #define W9966_SRAMSIZE 131072 /* 128kb */
83 #define W9966_SRAMID 0x02 /* check w9966cf.pdf */
84
85 /* Empirically determined window limits */
86 #define W9966_WND_MIN_X 16
87 #define W9966_WND_MIN_Y 14
88 #define W9966_WND_MAX_X 705
89 #define W9966_WND_MAX_Y 253
90 #define W9966_WND_MAX_W (W9966_WND_MAX_X - W9966_WND_MIN_X)
91 #define W9966_WND_MAX_H (W9966_WND_MAX_Y - W9966_WND_MIN_Y)
92
93 /* Keep track of our current state */
94 #define W9966_STATE_PDEV 0x01
95 #define W9966_STATE_CLAIMED 0x02
96 #define W9966_STATE_VDEV 0x04
97
98 #define W9966_I2C_W_ID 0x48
99 #define W9966_I2C_R_ID 0x49
100 #define W9966_I2C_R_DATA 0x08
101 #define W9966_I2C_R_CLOCK 0x04
102 #define W9966_I2C_W_DATA 0x02
103 #define W9966_I2C_W_CLOCK 0x01
104
105 struct w9966 {
106 struct v4l2_device v4l2_dev;
107 unsigned char dev_state;
108 unsigned char i2c_state;
109 unsigned short ppmode;
110 struct parport *pport;
111 struct pardevice *pdev;
112 struct video_device vdev;
113 unsigned short width;
114 unsigned short height;
115 unsigned char brightness;
116 signed char contrast;
117 signed char color;
118 signed char hue;
119 struct mutex lock;
120 };
121
122 /*
123 * Module specific properties
124 */
125
126 MODULE_AUTHOR("Jakob Kemi <jakob.kemi@post.utfors.se>");
127 MODULE_DESCRIPTION("Winbond w9966cf WebCam driver (0.32)");
128 MODULE_LICENSE("GPL");
129 MODULE_VERSION("0.33.1");
130
131 #ifdef MODULE
132 static const char *pardev[] = {[0 ... W9966_MAXCAMS] = ""};
133 #else
134 static const char *pardev[] = {[0 ... W9966_MAXCAMS] = "aggressive"};
135 #endif
136 module_param_array(pardev, charp, NULL, 0);
137 MODULE_PARM_DESC(pardev, "pardev: where to search for\n"
138 "\teach camera. 'aggressive' means brute-force search.\n"
139 "\tEg: >pardev=parport3,aggressive,parport2,parport1< would assign\n"
140 "\tcam 1 to parport3 and search every parport for cam 2 etc...");
141
142 static int parmode;
143 module_param(parmode, int, 0);
144 MODULE_PARM_DESC(parmode, "parmode: transfer mode (0=auto, 1=ecp, 2=epp");
145
146 static int video_nr = -1;
147 module_param(video_nr, int, 0);
148
149 static struct w9966 w9966_cams[W9966_MAXCAMS];
150
151 /*
152 * Private function defines
153 */
154
155
156 /* Set camera phase flags, so we know what to uninit when terminating */
157 static inline void w9966_set_state(struct w9966 *cam, int mask, int val)
158 {
159 cam->dev_state = (cam->dev_state & ~mask) ^ val;
160 }
161
162 /* Get camera phase flags */
163 static inline int w9966_get_state(struct w9966 *cam, int mask, int val)
164 {
165 return ((cam->dev_state & mask) == val);
166 }
167
168 /* Claim parport for ourself */
169 static void w9966_pdev_claim(struct w9966 *cam)
170 {
171 if (w9966_get_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED))
172 return;
173 parport_claim_or_block(cam->pdev);
174 w9966_set_state(cam, W9966_STATE_CLAIMED, W9966_STATE_CLAIMED);
175 }
176
177 /* Release parport for others to use */
178 static void w9966_pdev_release(struct w9966 *cam)
179 {
180 if (w9966_get_state(cam, W9966_STATE_CLAIMED, 0))
181 return;
182 parport_release(cam->pdev);
183 w9966_set_state(cam, W9966_STATE_CLAIMED, 0);
184 }
185
186 /* Read register from W9966 interface-chip
187 Expects a claimed pdev
188 -1 on error, else register data (byte) */
189 static int w9966_read_reg(struct w9966 *cam, int reg)
190 {
191 /* ECP, read, regtransfer, REG, REG, REG, REG, REG */
192 const unsigned char addr = 0x80 | (reg & 0x1f);
193 unsigned char val;
194
195 if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
196 return -1;
197 if (parport_write(cam->pport, &addr, 1) != 1)
198 return -1;
199 if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0)
200 return -1;
201 if (parport_read(cam->pport, &val, 1) != 1)
202 return -1;
203
204 return val;
205 }
206
207 /* Write register to W9966 interface-chip
208 Expects a claimed pdev
209 -1 on error */
210 static int w9966_write_reg(struct w9966 *cam, int reg, int data)
211 {
212 /* ECP, write, regtransfer, REG, REG, REG, REG, REG */
213 const unsigned char addr = 0xc0 | (reg & 0x1f);
214 const unsigned char val = data;
215
216 if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_ADDR) != 0)
217 return -1;
218 if (parport_write(cam->pport, &addr, 1) != 1)
219 return -1;
220 if (parport_negotiate(cam->pport, cam->ppmode | IEEE1284_DATA) != 0)
221 return -1;
222 if (parport_write(cam->pport, &val, 1) != 1)
223 return -1;
224
225 return 0;
226 }
227
228 /*
229 * Ugly and primitive i2c protocol functions
230 */
231
232 /* Sets the data line on the i2c bus.
233 Expects a claimed pdev. */
234 static void w9966_i2c_setsda(struct w9966 *cam, int state)
235 {
236 if (state)
237 cam->i2c_state |= W9966_I2C_W_DATA;
238 else
239 cam->i2c_state &= ~W9966_I2C_W_DATA;
240
241 w9966_write_reg(cam, 0x18, cam->i2c_state);
242 udelay(5);
243 }
244
245 /* Get peripheral clock line
246 Expects a claimed pdev. */
247 static int w9966_i2c_getscl(struct w9966 *cam)
248 {
249 const unsigned char state = w9966_read_reg(cam, 0x18);
250 return ((state & W9966_I2C_R_CLOCK) > 0);
251 }
252
253 /* Sets the clock line on the i2c bus.
254 Expects a claimed pdev. -1 on error */
255 static int w9966_i2c_setscl(struct w9966 *cam, int state)
256 {
257 unsigned long timeout;
258
259 if (state)
260 cam->i2c_state |= W9966_I2C_W_CLOCK;
261 else
262 cam->i2c_state &= ~W9966_I2C_W_CLOCK;
263
264 w9966_write_reg(cam, 0x18, cam->i2c_state);
265 udelay(5);
266
267 /* we go to high, we also expect the peripheral to ack. */
268 if (state) {
269 timeout = jiffies + 100;
270 while (!w9966_i2c_getscl(cam)) {
271 if (time_after(jiffies, timeout))
272 return -1;
273 }
274 }
275 return 0;
276 }
277
278 #if 0
279 /* Get peripheral data line
280 Expects a claimed pdev. */
281 static int w9966_i2c_getsda(struct w9966 *cam)
282 {
283 const unsigned char state = w9966_read_reg(cam, 0x18);
284 return ((state & W9966_I2C_R_DATA) > 0);
285 }
286 #endif
287
288 /* Write a byte with ack to the i2c bus.
289 Expects a claimed pdev. -1 on error */
290 static int w9966_i2c_wbyte(struct w9966 *cam, int data)
291 {
292 int i;
293
294 for (i = 7; i >= 0; i--) {
295 w9966_i2c_setsda(cam, (data >> i) & 0x01);
296
297 if (w9966_i2c_setscl(cam, 1) == -1)
298 return -1;
299 w9966_i2c_setscl(cam, 0);
300 }
301
302 w9966_i2c_setsda(cam, 1);
303
304 if (w9966_i2c_setscl(cam, 1) == -1)
305 return -1;
306 w9966_i2c_setscl(cam, 0);
307
308 return 0;
309 }
310
311 /* Read a data byte with ack from the i2c-bus
312 Expects a claimed pdev. -1 on error */
313 #if 0
314 static int w9966_i2c_rbyte(struct w9966 *cam)
315 {
316 unsigned char data = 0x00;
317 int i;
318
319 w9966_i2c_setsda(cam, 1);
320
321 for (i = 0; i < 8; i++) {
322 if (w9966_i2c_setscl(cam, 1) == -1)
323 return -1;
324 data = data << 1;
325 if (w9966_i2c_getsda(cam))
326 data |= 0x01;
327
328 w9966_i2c_setscl(cam, 0);
329 }
330 return data;
331 }
332 #endif
333
334 /* Read a register from the i2c device.
335 Expects claimed pdev. -1 on error */
336 #if 0
337 static int w9966_read_reg_i2c(struct w9966 *cam, int reg)
338 {
339 int data;
340
341 w9966_i2c_setsda(cam, 0);
342 w9966_i2c_setscl(cam, 0);
343
344 if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 ||
345 w9966_i2c_wbyte(cam, reg) == -1)
346 return -1;
347
348 w9966_i2c_setsda(cam, 1);
349 if (w9966_i2c_setscl(cam, 1) == -1)
350 return -1;
351 w9966_i2c_setsda(cam, 0);
352 w9966_i2c_setscl(cam, 0);
353
354 if (w9966_i2c_wbyte(cam, W9966_I2C_R_ID) == -1)
355 return -1;
356 data = w9966_i2c_rbyte(cam);
357 if (data == -1)
358 return -1;
359
360 w9966_i2c_setsda(cam, 0);
361
362 if (w9966_i2c_setscl(cam, 1) == -1)
363 return -1;
364 w9966_i2c_setsda(cam, 1);
365
366 return data;
367 }
368 #endif
369
370 /* Write a register to the i2c device.
371 Expects claimed pdev. -1 on error */
372 static int w9966_write_reg_i2c(struct w9966 *cam, int reg, int data)
373 {
374 w9966_i2c_setsda(cam, 0);
375 w9966_i2c_setscl(cam, 0);
376
377 if (w9966_i2c_wbyte(cam, W9966_I2C_W_ID) == -1 ||
378 w9966_i2c_wbyte(cam, reg) == -1 ||
379 w9966_i2c_wbyte(cam, data) == -1)
380 return -1;
381
382 w9966_i2c_setsda(cam, 0);
383 if (w9966_i2c_setscl(cam, 1) == -1)
384 return -1;
385
386 w9966_i2c_setsda(cam, 1);
387
388 return 0;
389 }
390
391 /* Find a good length for capture window (used both for W and H)
392 A bit ugly but pretty functional. The capture length
393 have to match the downscale */
394 static int w9966_findlen(int near, int size, int maxlen)
395 {
396 int bestlen = size;
397 int besterr = abs(near - bestlen);
398 int len;
399
400 for (len = size + 1; len < maxlen; len++) {
401 int err;
402 if (((64 * size) % len) != 0)
403 continue;
404
405 err = abs(near - len);
406
407 /* Only continue as long as we keep getting better values */
408 if (err > besterr)
409 break;
410
411 besterr = err;
412 bestlen = len;
413 }
414
415 return bestlen;
416 }
417
418 /* Modify capture window (if necessary)
419 and calculate downscaling
420 Return -1 on error */
421 static int w9966_calcscale(int size, int min, int max, int *beg, int *end, unsigned char *factor)
422 {
423 int maxlen = max - min;
424 int len = *end - *beg + 1;
425 int newlen = w9966_findlen(len, size, maxlen);
426 int err = newlen - len;
427
428 /* Check for bad format */
429 if (newlen > maxlen || newlen < size)
430 return -1;
431
432 /* Set factor (6 bit fixed) */
433 *factor = (64 * size) / newlen;
434 if (*factor == 64)
435 *factor = 0x00; /* downscale is disabled */
436 else
437 *factor |= 0x80; /* set downscale-enable bit */
438
439 /* Modify old beginning and end */
440 *beg -= err / 2;
441 *end += err - (err / 2);
442
443 /* Move window if outside borders */
444 if (*beg < min) {
445 *end += min - *beg;
446 *beg += min - *beg;
447 }
448 if (*end > max) {
449 *beg -= *end - max;
450 *end -= *end - max;
451 }
452
453 return 0;
454 }
455
456 /* Setup the cameras capture window etc.
457 Expects a claimed pdev
458 return -1 on error */
459 static int w9966_setup(struct w9966 *cam, int x1, int y1, int x2, int y2, int w, int h)
460 {
461 unsigned int i;
462 unsigned int enh_s, enh_e;
463 unsigned char scale_x, scale_y;
464 unsigned char regs[0x1c];
465 unsigned char saa7111_regs[] = {
466 0x21, 0x00, 0xd8, 0x23, 0x00, 0x80, 0x80, 0x00,
467 0x88, 0x10, 0x80, 0x40, 0x40, 0x00, 0x01, 0x00,
468 0x48, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
469 0x00, 0x00, 0x00, 0x71, 0xe7, 0x00, 0x00, 0xc0
470 };
471
472
473 if (w * h * 2 > W9966_SRAMSIZE) {
474 DPRINTF("capture window exceeds SRAM size!.\n");
475 w = 200; h = 160; /* Pick default values */
476 }
477
478 w &= ~0x1;
479 if (w < 2)
480 w = 2;
481 if (h < 1)
482 h = 1;
483 if (w > W9966_WND_MAX_W)
484 w = W9966_WND_MAX_W;
485 if (h > W9966_WND_MAX_H)
486 h = W9966_WND_MAX_H;
487
488 cam->width = w;
489 cam->height = h;
490
491 enh_s = 0;
492 enh_e = w * h * 2;
493
494 /* Modify capture window if necessary and calculate downscaling */
495 if (w9966_calcscale(w, W9966_WND_MIN_X, W9966_WND_MAX_X, &x1, &x2, &scale_x) != 0 ||
496 w9966_calcscale(h, W9966_WND_MIN_Y, W9966_WND_MAX_Y, &y1, &y2, &scale_y) != 0)
497 return -1;
498
499 DPRINTF("%dx%d, x: %d<->%d, y: %d<->%d, sx: %d/64, sy: %d/64.\n",
500 w, h, x1, x2, y1, y2, scale_x & ~0x80, scale_y & ~0x80);
501
502 /* Setup registers */
503 regs[0x00] = 0x00; /* Set normal operation */
504 regs[0x01] = 0x18; /* Capture mode */
505 regs[0x02] = scale_y; /* V-scaling */
506 regs[0x03] = scale_x; /* H-scaling */
507
508 /* Capture window */
509 regs[0x04] = (x1 & 0x0ff); /* X-start (8 low bits) */
510 regs[0x05] = (x1 & 0x300)>>8; /* X-start (2 high bits) */
511 regs[0x06] = (y1 & 0x0ff); /* Y-start (8 low bits) */
512 regs[0x07] = (y1 & 0x300)>>8; /* Y-start (2 high bits) */
513 regs[0x08] = (x2 & 0x0ff); /* X-end (8 low bits) */
514 regs[0x09] = (x2 & 0x300)>>8; /* X-end (2 high bits) */
515 regs[0x0a] = (y2 & 0x0ff); /* Y-end (8 low bits) */
516
517 regs[0x0c] = W9966_SRAMID; /* SRAM-banks (1x 128kb) */
518
519 /* Enhancement layer */
520 regs[0x0d] = (enh_s & 0x000ff); /* Enh. start (0-7) */
521 regs[0x0e] = (enh_s & 0x0ff00) >> 8; /* Enh. start (8-15) */
522 regs[0x0f] = (enh_s & 0x70000) >> 16; /* Enh. start (16-17/18??) */
523 regs[0x10] = (enh_e & 0x000ff); /* Enh. end (0-7) */
524 regs[0x11] = (enh_e & 0x0ff00) >> 8; /* Enh. end (8-15) */
525 regs[0x12] = (enh_e & 0x70000) >> 16; /* Enh. end (16-17/18??) */
526
527 /* Misc */
528 regs[0x13] = 0x40; /* VEE control (raw 4:2:2) */
529 regs[0x17] = 0x00; /* ??? */
530 regs[0x18] = cam->i2c_state = 0x00; /* Serial bus */
531 regs[0x19] = 0xff; /* I/O port direction control */
532 regs[0x1a] = 0xff; /* I/O port data register */
533 regs[0x1b] = 0x10; /* ??? */
534
535 /* SAA7111 chip settings */
536 saa7111_regs[0x0a] = cam->brightness;
537 saa7111_regs[0x0b] = cam->contrast;
538 saa7111_regs[0x0c] = cam->color;
539 saa7111_regs[0x0d] = cam->hue;
540
541 /* Reset (ECP-fifo & serial-bus) */
542 if (w9966_write_reg(cam, 0x00, 0x03) == -1)
543 return -1;
544
545 /* Write regs to w9966cf chip */
546 for (i = 0; i < 0x1c; i++)
547 if (w9966_write_reg(cam, i, regs[i]) == -1)
548 return -1;
549
550 /* Write regs to saa7111 chip */
551 for (i = 0; i < 0x20; i++)
552 if (w9966_write_reg_i2c(cam, i, saa7111_regs[i]) == -1)
553 return -1;
554
555 return 0;
556 }
557
558 /*
559 * Video4linux interfacing
560 */
561
562 static int cam_querycap(struct file *file, void *priv,
563 struct v4l2_capability *vcap)
564 {
565 struct w9966 *cam = video_drvdata(file);
566
567 strlcpy(vcap->driver, cam->v4l2_dev.name, sizeof(vcap->driver));
568 strlcpy(vcap->card, W9966_DRIVERNAME, sizeof(vcap->card));
569 strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
570 vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
571 return 0;
572 }
573
574 static int cam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
575 {
576 if (vin->index > 0)
577 return -EINVAL;
578 strlcpy(vin->name, "Camera", sizeof(vin->name));
579 vin->type = V4L2_INPUT_TYPE_CAMERA;
580 vin->audioset = 0;
581 vin->tuner = 0;
582 vin->std = 0;
583 vin->status = 0;
584 return 0;
585 }
586
587 static int cam_g_input(struct file *file, void *fh, unsigned int *inp)
588 {
589 *inp = 0;
590 return 0;
591 }
592
593 static int cam_s_input(struct file *file, void *fh, unsigned int inp)
594 {
595 return (inp > 0) ? -EINVAL : 0;
596 }
597
598 static int cam_queryctrl(struct file *file, void *priv,
599 struct v4l2_queryctrl *qc)
600 {
601 switch (qc->id) {
602 case V4L2_CID_BRIGHTNESS:
603 return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
604 case V4L2_CID_CONTRAST:
605 return v4l2_ctrl_query_fill(qc, -64, 64, 1, 64);
606 case V4L2_CID_SATURATION:
607 return v4l2_ctrl_query_fill(qc, -64, 64, 1, 64);
608 case V4L2_CID_HUE:
609 return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
610 }
611 return -EINVAL;
612 }
613
614 static int cam_g_ctrl(struct file *file, void *priv,
615 struct v4l2_control *ctrl)
616 {
617 struct w9966 *cam = video_drvdata(file);
618 int ret = 0;
619
620 switch (ctrl->id) {
621 case V4L2_CID_BRIGHTNESS:
622 ctrl->value = cam->brightness;
623 break;
624 case V4L2_CID_CONTRAST:
625 ctrl->value = cam->contrast;
626 break;
627 case V4L2_CID_SATURATION:
628 ctrl->value = cam->color;
629 break;
630 case V4L2_CID_HUE:
631 ctrl->value = cam->hue;
632 break;
633 default:
634 ret = -EINVAL;
635 break;
636 }
637 return ret;
638 }
639
640 static int cam_s_ctrl(struct file *file, void *priv,
641 struct v4l2_control *ctrl)
642 {
643 struct w9966 *cam = video_drvdata(file);
644 int ret = 0;
645
646 mutex_lock(&cam->lock);
647 switch (ctrl->id) {
648 case V4L2_CID_BRIGHTNESS:
649 cam->brightness = ctrl->value;
650 break;
651 case V4L2_CID_CONTRAST:
652 cam->contrast = ctrl->value;
653 break;
654 case V4L2_CID_SATURATION:
655 cam->color = ctrl->value;
656 break;
657 case V4L2_CID_HUE:
658 cam->hue = ctrl->value;
659 break;
660 default:
661 ret = -EINVAL;
662 break;
663 }
664
665 if (ret == 0) {
666 w9966_pdev_claim(cam);
667
668 if (w9966_write_reg_i2c(cam, 0x0a, cam->brightness) == -1 ||
669 w9966_write_reg_i2c(cam, 0x0b, cam->contrast) == -1 ||
670 w9966_write_reg_i2c(cam, 0x0c, cam->color) == -1 ||
671 w9966_write_reg_i2c(cam, 0x0d, cam->hue) == -1) {
672 ret = -EIO;
673 }
674
675 w9966_pdev_release(cam);
676 }
677 mutex_unlock(&cam->lock);
678 return ret;
679 }
680
681 static int cam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
682 {
683 struct w9966 *cam = video_drvdata(file);
684 struct v4l2_pix_format *pix = &fmt->fmt.pix;
685
686 pix->width = cam->width;
687 pix->height = cam->height;
688 pix->pixelformat = V4L2_PIX_FMT_YUYV;
689 pix->field = V4L2_FIELD_NONE;
690 pix->bytesperline = 2 * cam->width;
691 pix->sizeimage = 2 * cam->width * cam->height;
692 /* Just a guess */
693 pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
694 return 0;
695 }
696
697 static int cam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
698 {
699 struct v4l2_pix_format *pix = &fmt->fmt.pix;
700
701 if (pix->width < 2)
702 pix->width = 2;
703 if (pix->height < 1)
704 pix->height = 1;
705 if (pix->width > W9966_WND_MAX_W)
706 pix->width = W9966_WND_MAX_W;
707 if (pix->height > W9966_WND_MAX_H)
708 pix->height = W9966_WND_MAX_H;
709 pix->pixelformat = V4L2_PIX_FMT_YUYV;
710 pix->field = V4L2_FIELD_NONE;
711 pix->bytesperline = 2 * pix->width;
712 pix->sizeimage = 2 * pix->width * pix->height;
713 /* Just a guess */
714 pix->colorspace = V4L2_COLORSPACE_SMPTE170M;
715 return 0;
716 }
717
718 static int cam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
719 {
720 struct w9966 *cam = video_drvdata(file);
721 struct v4l2_pix_format *pix = &fmt->fmt.pix;
722 int ret = cam_try_fmt_vid_cap(file, fh, fmt);
723
724 if (ret)
725 return ret;
726
727 mutex_lock(&cam->lock);
728 /* Update camera regs */
729 w9966_pdev_claim(cam);
730 ret = w9966_setup(cam, 0, 0, 1023, 1023, pix->width, pix->height);
731 w9966_pdev_release(cam);
732 mutex_unlock(&cam->lock);
733 return ret;
734 }
735
736 static int cam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
737 {
738 static struct v4l2_fmtdesc formats[] = {
739 { 0, 0, 0,
740 "YUV 4:2:2", V4L2_PIX_FMT_YUYV,
741 { 0, 0, 0, 0 }
742 },
743 };
744 enum v4l2_buf_type type = fmt->type;
745
746 if (fmt->index > 0)
747 return -EINVAL;
748
749 *fmt = formats[fmt->index];
750 fmt->type = type;
751 return 0;
752 }
753
754 /* Capture data */
755 static ssize_t w9966_v4l_read(struct file *file, char __user *buf,
756 size_t count, loff_t *ppos)
757 {
758 struct w9966 *cam = video_drvdata(file);
759 unsigned char addr = 0xa0; /* ECP, read, CCD-transfer, 00000 */
760 unsigned char __user *dest = (unsigned char __user *)buf;
761 unsigned long dleft = count;
762 unsigned char *tbuf;
763
764 /* Why would anyone want more than this?? */
765 if (count > cam->width * cam->height * 2)
766 return -EINVAL;
767
768 mutex_lock(&cam->lock);
769 w9966_pdev_claim(cam);
770 w9966_write_reg(cam, 0x00, 0x02); /* Reset ECP-FIFO buffer */
771 w9966_write_reg(cam, 0x00, 0x00); /* Return to normal operation */
772 w9966_write_reg(cam, 0x01, 0x98); /* Enable capture */
773
774 /* write special capture-addr and negotiate into data transfer */
775 if ((parport_negotiate(cam->pport, cam->ppmode|IEEE1284_ADDR) != 0) ||
776 (parport_write(cam->pport, &addr, 1) != 1) ||
777 (parport_negotiate(cam->pport, cam->ppmode|IEEE1284_DATA) != 0)) {
778 w9966_pdev_release(cam);
779 mutex_unlock(&cam->lock);
780 return -EFAULT;
781 }
782
783 tbuf = kmalloc(W9966_RBUFFER, GFP_KERNEL);
784 if (tbuf == NULL) {
785 count = -ENOMEM;
786 goto out;
787 }
788
789 while (dleft > 0) {
790 unsigned long tsize = (dleft > W9966_RBUFFER) ? W9966_RBUFFER : dleft;
791
792 if (parport_read(cam->pport, tbuf, tsize) < tsize) {
793 count = -EFAULT;
794 goto out;
795 }
796 if (copy_to_user(dest, tbuf, tsize) != 0) {
797 count = -EFAULT;
798 goto out;
799 }
800 dest += tsize;
801 dleft -= tsize;
802 }
803
804 w9966_write_reg(cam, 0x01, 0x18); /* Disable capture */
805
806 out:
807 kfree(tbuf);
808 w9966_pdev_release(cam);
809 mutex_unlock(&cam->lock);
810
811 return count;
812 }
813
814 static const struct v4l2_file_operations w9966_fops = {
815 .owner = THIS_MODULE,
816 .unlocked_ioctl = video_ioctl2,
817 .read = w9966_v4l_read,
818 };
819
820 static const struct v4l2_ioctl_ops w9966_ioctl_ops = {
821 .vidioc_querycap = cam_querycap,
822 .vidioc_g_input = cam_g_input,
823 .vidioc_s_input = cam_s_input,
824 .vidioc_enum_input = cam_enum_input,
825 .vidioc_queryctrl = cam_queryctrl,
826 .vidioc_g_ctrl = cam_g_ctrl,
827 .vidioc_s_ctrl = cam_s_ctrl,
828 .vidioc_enum_fmt_vid_cap = cam_enum_fmt_vid_cap,
829 .vidioc_g_fmt_vid_cap = cam_g_fmt_vid_cap,
830 .vidioc_s_fmt_vid_cap = cam_s_fmt_vid_cap,
831 .vidioc_try_fmt_vid_cap = cam_try_fmt_vid_cap,
832 };
833
834
835 /* Initialize camera device. Setup all internal flags, set a
836 default video mode, setup ccd-chip, register v4l device etc..
837 Also used for 'probing' of hardware.
838 -1 on error */
839 static int w9966_init(struct w9966 *cam, struct parport *port)
840 {
841 struct v4l2_device *v4l2_dev = &cam->v4l2_dev;
842
843 if (cam->dev_state != 0)
844 return -1;
845
846 strlcpy(v4l2_dev->name, "w9966", sizeof(v4l2_dev->name));
847
848 if (v4l2_device_register(NULL, v4l2_dev) < 0) {
849 v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
850 return -1;
851 }
852 cam->pport = port;
853 cam->brightness = 128;
854 cam->contrast = 64;
855 cam->color = 64;
856 cam->hue = 0;
857
858 /* Select requested transfer mode */
859 switch (parmode) {
860 default: /* Auto-detect (priority: hw-ecp, hw-epp, sw-ecp) */
861 case 0:
862 if (port->modes & PARPORT_MODE_ECP)
863 cam->ppmode = IEEE1284_MODE_ECP;
864 else if (port->modes & PARPORT_MODE_EPP)
865 cam->ppmode = IEEE1284_MODE_EPP;
866 else
867 cam->ppmode = IEEE1284_MODE_ECP;
868 break;
869 case 1: /* hw- or sw-ecp */
870 cam->ppmode = IEEE1284_MODE_ECP;
871 break;
872 case 2: /* hw- or sw-epp */
873 cam->ppmode = IEEE1284_MODE_EPP;
874 break;
875 }
876
877 /* Tell the parport driver that we exists */
878 cam->pdev = parport_register_device(port, "w9966", NULL, NULL, NULL, 0, NULL);
879 if (cam->pdev == NULL) {
880 DPRINTF("parport_register_device() failed\n");
881 return -1;
882 }
883 w9966_set_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV);
884
885 w9966_pdev_claim(cam);
886
887 /* Setup a default capture mode */
888 if (w9966_setup(cam, 0, 0, 1023, 1023, 200, 160) != 0) {
889 DPRINTF("w9966_setup() failed.\n");
890 return -1;
891 }
892
893 w9966_pdev_release(cam);
894
895 /* Fill in the video_device struct and register us to v4l */
896 strlcpy(cam->vdev.name, W9966_DRIVERNAME, sizeof(cam->vdev.name));
897 cam->vdev.v4l2_dev = v4l2_dev;
898 cam->vdev.fops = &w9966_fops;
899 cam->vdev.ioctl_ops = &w9966_ioctl_ops;
900 cam->vdev.release = video_device_release_empty;
901 video_set_drvdata(&cam->vdev, cam);
902
903 mutex_init(&cam->lock);
904
905 if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
906 return -1;
907
908 w9966_set_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
909
910 /* All ok */
911 v4l2_info(v4l2_dev, "Found and initialized a webcam on %s.\n",
912 cam->pport->name);
913 return 0;
914 }
915
916
917 /* Terminate everything gracefully */
918 static void w9966_term(struct w9966 *cam)
919 {
920 /* Unregister from v4l */
921 if (w9966_get_state(cam, W9966_STATE_VDEV, W9966_STATE_VDEV)) {
922 video_unregister_device(&cam->vdev);
923 w9966_set_state(cam, W9966_STATE_VDEV, 0);
924 }
925
926 /* Terminate from IEEE1284 mode and release pdev block */
927 if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) {
928 w9966_pdev_claim(cam);
929 parport_negotiate(cam->pport, IEEE1284_MODE_COMPAT);
930 w9966_pdev_release(cam);
931 }
932
933 /* Unregister from parport */
934 if (w9966_get_state(cam, W9966_STATE_PDEV, W9966_STATE_PDEV)) {
935 parport_unregister_device(cam->pdev);
936 w9966_set_state(cam, W9966_STATE_PDEV, 0);
937 }
938 memset(cam, 0, sizeof(*cam));
939 }
940
941
942 /* Called once for every parport on init */
943 static void w9966_attach(struct parport *port)
944 {
945 int i;
946
947 for (i = 0; i < W9966_MAXCAMS; i++) {
948 if (w9966_cams[i].dev_state != 0) /* Cam is already assigned */
949 continue;
950 if (strcmp(pardev[i], "aggressive") == 0 || strcmp(pardev[i], port->name) == 0) {
951 if (w9966_init(&w9966_cams[i], port) != 0)
952 w9966_term(&w9966_cams[i]);
953 break; /* return */
954 }
955 }
956 }
957
958 /* Called once for every parport on termination */
959 static void w9966_detach(struct parport *port)
960 {
961 int i;
962
963 for (i = 0; i < W9966_MAXCAMS; i++)
964 if (w9966_cams[i].dev_state != 0 && w9966_cams[i].pport == port)
965 w9966_term(&w9966_cams[i]);
966 }
967
968
969 static struct parport_driver w9966_ppd = {
970 .name = W9966_DRIVERNAME,
971 .attach = w9966_attach,
972 .detach = w9966_detach,
973 };
974
975 /* Module entry point */
976 static int __init w9966_mod_init(void)
977 {
978 int i;
979
980 for (i = 0; i < W9966_MAXCAMS; i++)
981 w9966_cams[i].dev_state = 0;
982
983 return parport_register_driver(&w9966_ppd);
984 }
985
986 /* Module cleanup */
987 static void __exit w9966_mod_term(void)
988 {
989 parport_unregister_driver(&w9966_ppd);
990 }
991
992 module_init(w9966_mod_init);
993 module_exit(w9966_mod_term);