projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob
? search:


b4c322d1609c71f051bd69363cb98ab82ee00cb1
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / media / video / em28xx / em28xx-cards.c
1 /*
2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB
3 video capture devices
4
5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
6 Markus Rechberger <mrechberger@gmail.com>
7 Mauro Carvalho Chehab <mchehab@infradead.org>
8 Sascha Sommer <saschasommer@freenet.de>
9
10 This program is free software; you can redistribute it and/or modify
11 it under the terms of the GNU General Public License as published by
12 the Free Software Foundation; either version 2 of the License, or
13 (at your option) any later version.
14
15 This program is distributed in the hope that it will be useful,
16 but WITHOUT ANY WARRANTY; without even the implied warranty of
17 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 GNU General Public License for more details.
19
20 You should have received a copy of the GNU General Public License
21 along with this program; if not, write to the Free Software
22 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 */
24
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
29 #include <linux/i2c.h>
30 #include <linux/usb.h>
31 #include <media/tuner.h>
32 #include <media/msp3400.h>
33 #include <media/saa7115.h>
34 #include <media/tvp5150.h>
35 #include <media/tvaudio.h>
36 #include <media/mt9v011.h>
37 #include <media/i2c-addr.h>
38 #include <media/tveeprom.h>
39 #include <media/v4l2-common.h>
40 #include <media/v4l2-chip-ident.h>
41
42 #include "em28xx.h"
43
44 #define DRIVER_NAME "em28xx"
45
46 static int tuner = -1;
47 module_param(tuner, int, 0444);
48 MODULE_PARM_DESC(tuner, "tuner type");
49
50 static unsigned int disable_ir;
51 module_param(disable_ir, int, 0444);
52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support");
53
54 static unsigned int disable_usb_speed_check;
55 module_param(disable_usb_speed_check, int, 0444);
56 MODULE_PARM_DESC(disable_usb_speed_check,
57 "override min bandwidth requirement of 480M bps");
58
59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
60 module_param_array(card, int, NULL, 0444);
61 MODULE_PARM_DESC(card, "card type");
62
63 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
64 static unsigned long em28xx_devused;
65
66 struct em28xx_hash_table {
67 unsigned long hash;
68 unsigned int model;
69 unsigned int tuner;
70 };
71
72 /*
73 * Reset sequences for analog/digital modes
74 */
75
76 /* Reset for the most [analog] boards */
77 static struct em28xx_reg_seq default_analog[] = {
78 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
79 { -1, -1, -1, -1},
80 };
81
82 /* Reset for the most [digital] boards */
83 static struct em28xx_reg_seq default_digital[] = {
84 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
85 { -1, -1, -1, -1},
86 };
87
88 /* Board Hauppauge WinTV HVR 900 analog */
89 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = {
90 {EM28XX_R08_GPIO, 0x2d, ~EM_GPIO_4, 10},
91 {0x05, 0xff, 0x10, 10},
92 { -1, -1, -1, -1},
93 };
94
95 /* Board Hauppauge WinTV HVR 900 digital */
96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = {
97 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
98 {EM2880_R04_GPO, 0x04, 0x0f, 10},
99 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
100 { -1, -1, -1, -1},
101 };
102
103 /* Board Hauppauge WinTV HVR 900 (R2) digital */
104 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = {
105 {EM28XX_R08_GPIO, 0x2e, ~EM_GPIO_4, 10},
106 {EM2880_R04_GPO, 0x0c, 0x0f, 10},
107 { -1, -1, -1, -1},
108 };
109
110 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
111 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
112 {EM28XX_R08_GPIO, 0x69, ~EM_GPIO_4, 10},
113 { -1, -1, -1, -1},
114 };
115
116 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
117
118 /* Board - EM2870 Kworld 355u
119 Analog - No input analog */
120
121 /* Board - EM2882 Kworld 315U digital */
122 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
123 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
124 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
125 {EM2880_R04_GPO, 0x04, 0xff, 10},
126 {EM2880_R04_GPO, 0x0c, 0xff, 10},
127 {EM28XX_R08_GPIO, 0x7e, 0xff, 10},
128 { -1, -1, -1, -1},
129 };
130
131 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = {
132 {EM2880_R04_GPO, 0x08, 0xff, 10},
133 {EM2880_R04_GPO, 0x0c, 0xff, 10},
134 {EM2880_R04_GPO, 0x08, 0xff, 10},
135 {EM2880_R04_GPO, 0x0c, 0xff, 10},
136 { -1, -1, -1, -1},
137 };
138
139 static struct em28xx_reg_seq kworld_330u_analog[] = {
140 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
141 {EM2880_R04_GPO, 0x00, 0xff, 10},
142 { -1, -1, -1, -1},
143 };
144
145 static struct em28xx_reg_seq kworld_330u_digital[] = {
146 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
147 {EM2880_R04_GPO, 0x08, 0xff, 10},
148 { -1, -1, -1, -1},
149 };
150
151 /* Evga inDtube
152 GPIO0 - Enable digital power (s5h1409) - low to enable
153 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
154 GPIO4 - xc3028 reset
155 GOP3 - s5h1409 reset
156 */
157 static struct em28xx_reg_seq evga_indtube_analog[] = {
158 {EM28XX_R08_GPIO, 0x79, 0xff, 60},
159 { -1, -1, -1, -1},
160 };
161
162 static struct em28xx_reg_seq evga_indtube_digital[] = {
163 {EM28XX_R08_GPIO, 0x7a, 0xff, 1},
164 {EM2880_R04_GPO, 0x04, 0xff, 10},
165 {EM2880_R04_GPO, 0x0c, 0xff, 1},
166 { -1, -1, -1, -1},
167 };
168
169 /*
170 * KWorld PlusTV 340U and UB435-Q (ATSC) GPIOs map:
171 * EM_GPIO_0 - currently unknown
172 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on)
173 * EM_GPIO_2 - currently unknown
174 * EM_GPIO_3 - currently unknown
175 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset)
176 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset)
177 * EM_GPIO_6 - currently unknown
178 * EM_GPIO_7 - currently unknown
179 */
180 static struct em28xx_reg_seq kworld_a340_digital[] = {
181 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
182 { -1, -1, -1, -1},
183 };
184
185 /* Pinnacle Hybrid Pro eb1a:2881 */
186 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
187 {EM28XX_R08_GPIO, 0xfd, ~EM_GPIO_4, 10},
188 { -1, -1, -1, -1},
189 };
190
191 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
192 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
193 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */
194 {EM2880_R04_GPO, 0x0c, 0xff, 1},
195 { -1, -1, -1, -1},
196 };
197
198 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = {
199 {EM28XX_R08_GPIO, 0x6d, ~EM_GPIO_4, 10},
200 {EM2880_R04_GPO, 0x00, 0xff, 10},
201 { -1, -1, -1, -1},
202 };
203
204 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
205 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
206 {EM2880_R04_GPO, 0x08, 0xff, 10},
207 { -1, -1, -1, -1},
208 };
209
210 /* eb1a:2868 Reddo DVB-C USB TV Box
211 GPIO4 - CU1216L NIM
212 Other GPIOs seems to be don't care. */
213 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
214 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
215 {EM28XX_R08_GPIO, 0xde, 0xff, 10},
216 {EM28XX_R08_GPIO, 0xfe, 0xff, 10},
217 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
218 {EM28XX_R08_GPIO, 0x7f, 0xff, 10},
219 {EM28XX_R08_GPIO, 0x6f, 0xff, 10},
220 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
221 {-1, -1, -1, -1},
222 };
223
224 /* Callback for the most boards */
225 static struct em28xx_reg_seq default_tuner_gpio[] = {
226 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
227 {EM28XX_R08_GPIO, 0, EM_GPIO_4, 10},
228 {EM28XX_R08_GPIO, EM_GPIO_4, EM_GPIO_4, 10},
229 { -1, -1, -1, -1},
230 };
231
232 /* Mute/unmute */
233 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = {
234 {EM28XX_R08_GPIO, 5, 7, 10},
235 { -1, -1, -1, -1},
236 };
237
238 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = {
239 {EM28XX_R08_GPIO, 4, 7, 10},
240 { -1, -1, -1, -1},
241 };
242
243 static struct em28xx_reg_seq compro_mute_gpio[] = {
244 {EM28XX_R08_GPIO, 6, 7, 10},
245 { -1, -1, -1, -1},
246 };
247
248 /* Terratec AV350 */
249 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = {
250 {EM28XX_R08_GPIO, 0xff, 0x7f, 10},
251 { -1, -1, -1, -1},
252 };
253
254 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = {
255 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
256 { -1, -1, -1, -1},
257 };
258
259 static struct em28xx_reg_seq silvercrest_reg_seq[] = {
260 {EM28XX_R08_GPIO, 0xff, 0xff, 10},
261 {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
262 { -1, -1, -1, -1},
263 };
264
265 static struct em28xx_reg_seq vc211a_enable[] = {
266 {EM28XX_R08_GPIO, 0xff, 0x07, 10},
267 {EM28XX_R08_GPIO, 0xff, 0x0f, 10},
268 {EM28XX_R08_GPIO, 0xff, 0x0b, 10},
269 { -1, -1, -1, -1},
270 };
271
272 static struct em28xx_reg_seq dikom_dk300_digital[] = {
273 {EM28XX_R08_GPIO, 0x6e, ~EM_GPIO_4, 10},
274 {EM2880_R04_GPO, 0x08, 0xff, 10},
275 { -1, -1, -1, -1},
276 };
277
278
279 /* Reset for the most [digital] boards */
280 static struct em28xx_reg_seq leadership_digital[] = {
281 {EM2874_R80_GPIO, 0x70, 0xff, 10},
282 { -1, -1, -1, -1},
283 };
284
285 static struct em28xx_reg_seq leadership_reset[] = {
286 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
287 {EM2874_R80_GPIO, 0xb0, 0xff, 10},
288 {EM2874_R80_GPIO, 0xf0, 0xff, 10},
289 { -1, -1, -1, -1},
290 };
291
292
293 /*
294 * Board definitions
295 */
296 struct em28xx_board em28xx_boards[] = {
297 [EM2750_BOARD_UNKNOWN] = {
298 .name = "EM2710/EM2750/EM2751 webcam grabber",
299 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ,
300 .tuner_type = TUNER_ABSENT,
301 .is_webcam = 1,
302 .input = { {
303 .type = EM28XX_VMUX_COMPOSITE1,
304 .vmux = 0,
305 .amux = EM28XX_AMUX_VIDEO,
306 .gpio = silvercrest_reg_seq,
307 } },
308 },
309 [EM2800_BOARD_UNKNOWN] = {
310 .name = "Unknown EM2800 video grabber",
311 .is_em2800 = 1,
312 .tda9887_conf = TDA9887_PRESENT,
313 .decoder = EM28XX_SAA711X,
314 .tuner_type = TUNER_ABSENT,
315 .input = { {
316 .type = EM28XX_VMUX_COMPOSITE1,
317 .vmux = SAA7115_COMPOSITE0,
318 .amux = EM28XX_AMUX_LINE_IN,
319 }, {
320 .type = EM28XX_VMUX_SVIDEO,
321 .vmux = SAA7115_SVIDEO3,
322 .amux = EM28XX_AMUX_LINE_IN,
323 } },
324 },
325 [EM2820_BOARD_UNKNOWN] = {
326 .name = "Unknown EM2750/28xx video grabber",
327 .tuner_type = TUNER_ABSENT,
328 .is_webcam = 1, /* To enable sensor probe */
329 },
330 [EM2750_BOARD_DLCW_130] = {
331 /* Beijing Huaqi Information Digital Technology Co., Ltd */
332 .name = "Huaqi DLCW-130",
333 .valid = EM28XX_BOARD_NOT_VALIDATED,
334 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ,
335 .tuner_type = TUNER_ABSENT,
336 .is_webcam = 1,
337 .input = { {
338 .type = EM28XX_VMUX_COMPOSITE1,
339 .vmux = 0,
340 .amux = EM28XX_AMUX_VIDEO,
341 } },
342 },
343 [EM2820_BOARD_KWORLD_PVRTV2800RF] = {
344 .name = "Kworld PVR TV 2800 RF",
345 .tuner_type = TUNER_TEMIC_PAL,
346 .tda9887_conf = TDA9887_PRESENT,
347 .decoder = EM28XX_SAA711X,
348 .input = { {
349 .type = EM28XX_VMUX_COMPOSITE1,
350 .vmux = SAA7115_COMPOSITE0,
351 .amux = EM28XX_AMUX_LINE_IN,
352 }, {
353 .type = EM28XX_VMUX_SVIDEO,
354 .vmux = SAA7115_SVIDEO3,
355 .amux = EM28XX_AMUX_LINE_IN,
356 } },
357 },
358 [EM2820_BOARD_GADMEI_TVR200] = {
359 .name = "Gadmei TVR200",
360 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
361 .tda9887_conf = TDA9887_PRESENT,
362 .decoder = EM28XX_SAA711X,
363 .input = { {
364 .type = EM28XX_VMUX_TELEVISION,
365 .vmux = SAA7115_COMPOSITE2,
366 .amux = EM28XX_AMUX_LINE_IN,
367 }, {
368 .type = EM28XX_VMUX_COMPOSITE1,
369 .vmux = SAA7115_COMPOSITE0,
370 .amux = EM28XX_AMUX_LINE_IN,
371 }, {
372 .type = EM28XX_VMUX_SVIDEO,
373 .vmux = SAA7115_SVIDEO3,
374 .amux = EM28XX_AMUX_LINE_IN,
375 } },
376 },
377 [EM2820_BOARD_TERRATEC_CINERGY_250] = {
378 .name = "Terratec Cinergy 250 USB",
379 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
380 .has_ir_i2c = 1,
381 .tda9887_conf = TDA9887_PRESENT,
382 .decoder = EM28XX_SAA711X,
383 .input = { {
384 .type = EM28XX_VMUX_TELEVISION,
385 .vmux = SAA7115_COMPOSITE2,
386 .amux = EM28XX_AMUX_LINE_IN,
387 }, {
388 .type = EM28XX_VMUX_COMPOSITE1,
389 .vmux = SAA7115_COMPOSITE0,
390 .amux = EM28XX_AMUX_LINE_IN,
391 }, {
392 .type = EM28XX_VMUX_SVIDEO,
393 .vmux = SAA7115_SVIDEO3,
394 .amux = EM28XX_AMUX_LINE_IN,
395 } },
396 },
397 [EM2820_BOARD_PINNACLE_USB_2] = {
398 .name = "Pinnacle PCTV USB 2",
399 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
400 .has_ir_i2c = 1,
401 .tda9887_conf = TDA9887_PRESENT,
402 .decoder = EM28XX_SAA711X,
403 .input = { {
404 .type = EM28XX_VMUX_TELEVISION,
405 .vmux = SAA7115_COMPOSITE2,
406 .amux = EM28XX_AMUX_VIDEO,
407 }, {
408 .type = EM28XX_VMUX_COMPOSITE1,
409 .vmux = SAA7115_COMPOSITE0,
410 .amux = EM28XX_AMUX_LINE_IN,
411 }, {
412 .type = EM28XX_VMUX_SVIDEO,
413 .vmux = SAA7115_SVIDEO3,
414 .amux = EM28XX_AMUX_LINE_IN,
415 } },
416 },
417 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
418 .name = "Hauppauge WinTV USB 2",
419 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
420 .tda9887_conf = TDA9887_PRESENT |
421 TDA9887_PORT1_ACTIVE |
422 TDA9887_PORT2_ACTIVE,
423 .decoder = EM28XX_TVP5150,
424 .has_msp34xx = 1,
425 .has_ir_i2c = 1,
426 .input = { {
427 .type = EM28XX_VMUX_TELEVISION,
428 .vmux = TVP5150_COMPOSITE0,
429 .amux = MSP_INPUT_DEFAULT,
430 }, {
431 .type = EM28XX_VMUX_SVIDEO,
432 .vmux = TVP5150_SVIDEO,
433 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1,
434 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART),
435 } },
436 },
437 [EM2820_BOARD_DLINK_USB_TV] = {
438 .name = "D-Link DUB-T210 TV Tuner",
439 .valid = EM28XX_BOARD_NOT_VALIDATED,
440 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
441 .tda9887_conf = TDA9887_PRESENT,
442 .decoder = EM28XX_SAA711X,
443 .input = { {
444 .type = EM28XX_VMUX_TELEVISION,
445 .vmux = SAA7115_COMPOSITE2,
446 .amux = EM28XX_AMUX_LINE_IN,
447 }, {
448 .type = EM28XX_VMUX_COMPOSITE1,
449 .vmux = SAA7115_COMPOSITE0,
450 .amux = EM28XX_AMUX_LINE_IN,
451 }, {
452 .type = EM28XX_VMUX_SVIDEO,
453 .vmux = SAA7115_SVIDEO3,
454 .amux = EM28XX_AMUX_LINE_IN,
455 } },
456 },
457 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = {
458 .name = "Hercules Smart TV USB 2.0",
459 .valid = EM28XX_BOARD_NOT_VALIDATED,
460 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
461 .tda9887_conf = TDA9887_PRESENT,
462 .decoder = EM28XX_SAA711X,
463 .input = { {
464 .type = EM28XX_VMUX_TELEVISION,
465 .vmux = SAA7115_COMPOSITE2,
466 .amux = EM28XX_AMUX_LINE_IN,
467 }, {
468 .type = EM28XX_VMUX_COMPOSITE1,
469 .vmux = SAA7115_COMPOSITE0,
470 .amux = EM28XX_AMUX_LINE_IN,
471 }, {
472 .type = EM28XX_VMUX_SVIDEO,
473 .vmux = SAA7115_SVIDEO3,
474 .amux = EM28XX_AMUX_LINE_IN,
475 } },
476 },
477 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = {
478 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)",
479 .valid = EM28XX_BOARD_NOT_VALIDATED,
480 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
481 .tda9887_conf = TDA9887_PRESENT,
482 .decoder = EM28XX_SAA711X,
483 .input = { {
484 .type = EM28XX_VMUX_TELEVISION,
485 .vmux = SAA7115_COMPOSITE2,
486 .amux = EM28XX_AMUX_VIDEO,
487 }, {
488 .type = EM28XX_VMUX_COMPOSITE1,
489 .vmux = SAA7115_COMPOSITE0,
490 .amux = EM28XX_AMUX_LINE_IN,
491 }, {
492 .type = EM28XX_VMUX_SVIDEO,
493 .vmux = SAA7115_SVIDEO3,
494 .amux = EM28XX_AMUX_LINE_IN,
495 } },
496 },
497 [EM2820_BOARD_GADMEI_UTV310] = {
498 .name = "Gadmei UTV310",
499 .valid = EM28XX_BOARD_NOT_VALIDATED,
500 .tuner_type = TUNER_TNF_5335MF,
501 .tda9887_conf = TDA9887_PRESENT,
502 .decoder = EM28XX_SAA711X,
503 .input = { {
504 .type = EM28XX_VMUX_TELEVISION,
505 .vmux = SAA7115_COMPOSITE1,
506 .amux = EM28XX_AMUX_LINE_IN,
507 }, {
508 .type = EM28XX_VMUX_COMPOSITE1,
509 .vmux = SAA7115_COMPOSITE0,
510 .amux = EM28XX_AMUX_LINE_IN,
511 }, {
512 .type = EM28XX_VMUX_SVIDEO,
513 .vmux = SAA7115_SVIDEO3,
514 .amux = EM28XX_AMUX_LINE_IN,
515 } },
516 },
517 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = {
518 .name = "Leadtek Winfast USB II Deluxe",
519 .valid = EM28XX_BOARD_NOT_VALIDATED,
520 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3,
521 .has_ir_i2c = 1,
522 .tvaudio_addr = 0x58,
523 .tda9887_conf = TDA9887_PRESENT |
524 TDA9887_PORT2_ACTIVE |
525 TDA9887_QSS,
526 .decoder = EM28XX_SAA711X,
527 .adecoder = EM28XX_TVAUDIO,
528 .input = { {
529 .type = EM28XX_VMUX_TELEVISION,
530 .vmux = SAA7115_COMPOSITE4,
531 .amux = EM28XX_AMUX_AUX,
532 }, {
533 .type = EM28XX_VMUX_COMPOSITE1,
534 .vmux = SAA7115_COMPOSITE5,
535 .amux = EM28XX_AMUX_LINE_IN,
536 }, {
537 .type = EM28XX_VMUX_SVIDEO,
538 .vmux = SAA7115_SVIDEO3,
539 .amux = EM28XX_AMUX_LINE_IN,
540 } },
541 .radio = {
542 .type = EM28XX_RADIO,
543 .amux = EM28XX_AMUX_AUX,
544 }
545 },
546 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
547 .name = "Videology 20K14XUSB USB2.0",
548 .valid = EM28XX_BOARD_NOT_VALIDATED,
549 .tuner_type = TUNER_ABSENT,
550 .is_webcam = 1,
551 .input = { {
552 .type = EM28XX_VMUX_COMPOSITE1,
553 .vmux = 0,
554 .amux = EM28XX_AMUX_VIDEO,
555 } },
556 },
557 [EM2820_BOARD_SILVERCREST_WEBCAM] = {
558 .name = "Silvercrest Webcam 1.3mpix",
559 .tuner_type = TUNER_ABSENT,
560 .is_webcam = 1,
561 .input = { {
562 .type = EM28XX_VMUX_COMPOSITE1,
563 .vmux = 0,
564 .amux = EM28XX_AMUX_VIDEO,
565 .gpio = silvercrest_reg_seq,
566 } },
567 },
568 [EM2821_BOARD_SUPERCOMP_USB_2] = {
569 .name = "Supercomp USB 2.0 TV",
570 .valid = EM28XX_BOARD_NOT_VALIDATED,
571 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
572 .tda9887_conf = TDA9887_PRESENT |
573 TDA9887_PORT1_ACTIVE |
574 TDA9887_PORT2_ACTIVE,
575 .decoder = EM28XX_SAA711X,
576 .input = { {
577 .type = EM28XX_VMUX_TELEVISION,
578 .vmux = SAA7115_COMPOSITE2,
579 .amux = EM28XX_AMUX_LINE_IN,
580 }, {
581 .type = EM28XX_VMUX_COMPOSITE1,
582 .vmux = SAA7115_COMPOSITE0,
583 .amux = EM28XX_AMUX_VIDEO,
584 }, {
585 .type = EM28XX_VMUX_SVIDEO,
586 .vmux = SAA7115_SVIDEO3,
587 .amux = EM28XX_AMUX_LINE_IN,
588 } },
589 },
590 [EM2821_BOARD_USBGEAR_VD204] = {
591 .name = "Usbgear VD204v9",
592 .valid = EM28XX_BOARD_NOT_VALIDATED,
593 .tuner_type = TUNER_ABSENT, /* Capture only device */
594 .decoder = EM28XX_SAA711X,
595 .input = { {
596 .type = EM28XX_VMUX_COMPOSITE1,
597 .vmux = SAA7115_COMPOSITE0,
598 .amux = EM28XX_AMUX_LINE_IN,
599 }, {
600 .type = EM28XX_VMUX_SVIDEO,
601 .vmux = SAA7115_SVIDEO3,
602 .amux = EM28XX_AMUX_LINE_IN,
603 } },
604 },
605 [EM2860_BOARD_NETGMBH_CAM] = {
606 /* Beijing Huaqi Information Digital Technology Co., Ltd */
607 .name = "NetGMBH Cam",
608 .valid = EM28XX_BOARD_NOT_VALIDATED,
609 .tuner_type = TUNER_ABSENT,
610 .is_webcam = 1,
611 .input = { {
612 .type = EM28XX_VMUX_COMPOSITE1,
613 .vmux = 0,
614 .amux = EM28XX_AMUX_VIDEO,
615 } },
616 },
617 [EM2860_BOARD_TYPHOON_DVD_MAKER] = {
618 .name = "Typhoon DVD Maker",
619 .decoder = EM28XX_SAA711X,
620 .tuner_type = TUNER_ABSENT, /* Capture only device */
621 .input = { {
622 .type = EM28XX_VMUX_COMPOSITE1,
623 .vmux = SAA7115_COMPOSITE0,
624 .amux = EM28XX_AMUX_LINE_IN,
625 }, {
626 .type = EM28XX_VMUX_SVIDEO,
627 .vmux = SAA7115_SVIDEO3,
628 .amux = EM28XX_AMUX_LINE_IN,
629 } },
630 },
631 [EM2860_BOARD_GADMEI_UTV330] = {
632 .name = "Gadmei UTV330",
633 .valid = EM28XX_BOARD_NOT_VALIDATED,
634 .tuner_type = TUNER_TNF_5335MF,
635 .tda9887_conf = TDA9887_PRESENT,
636 .decoder = EM28XX_SAA711X,
637 .input = { {
638 .type = EM28XX_VMUX_TELEVISION,
639 .vmux = SAA7115_COMPOSITE2,
640 .amux = EM28XX_AMUX_VIDEO,
641 }, {
642 .type = EM28XX_VMUX_COMPOSITE1,
643 .vmux = SAA7115_COMPOSITE0,
644 .amux = EM28XX_AMUX_LINE_IN,
645 }, {
646 .type = EM28XX_VMUX_SVIDEO,
647 .vmux = SAA7115_SVIDEO3,
648 .amux = EM28XX_AMUX_LINE_IN,
649 } },
650 },
651 [EM2861_BOARD_GADMEI_UTV330PLUS] = {
652 .name = "Gadmei UTV330+",
653 .tuner_type = TUNER_TNF_5335MF,
654 .tda9887_conf = TDA9887_PRESENT,
655 .ir_codes = RC_MAP_GADMEI_RM008Z,
656 .decoder = EM28XX_SAA711X,
657 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
658 .input = { {
659 .type = EM28XX_VMUX_TELEVISION,
660 .vmux = SAA7115_COMPOSITE2,
661 .amux = EM28XX_AMUX_VIDEO,
662 }, {
663 .type = EM28XX_VMUX_COMPOSITE1,
664 .vmux = SAA7115_COMPOSITE0,
665 .amux = EM28XX_AMUX_LINE_IN,
666 }, {
667 .type = EM28XX_VMUX_SVIDEO,
668 .vmux = SAA7115_SVIDEO3,
669 .amux = EM28XX_AMUX_LINE_IN,
670 } },
671 },
672 [EM2860_BOARD_TERRATEC_HYBRID_XS] = {
673 .name = "Terratec Cinergy A Hybrid XS",
674 .valid = EM28XX_BOARD_NOT_VALIDATED,
675 .tuner_type = TUNER_XC2028,
676 .tuner_gpio = default_tuner_gpio,
677 .decoder = EM28XX_TVP5150,
678
679 .input = { {
680 .type = EM28XX_VMUX_TELEVISION,
681 .vmux = TVP5150_COMPOSITE0,
682 .amux = EM28XX_AMUX_VIDEO,
683 .gpio = hauppauge_wintv_hvr_900_analog,
684 }, {
685 .type = EM28XX_VMUX_COMPOSITE1,
686 .vmux = TVP5150_COMPOSITE1,
687 .amux = EM28XX_AMUX_LINE_IN,
688 .gpio = hauppauge_wintv_hvr_900_analog,
689 }, {
690 .type = EM28XX_VMUX_SVIDEO,
691 .vmux = TVP5150_SVIDEO,
692 .amux = EM28XX_AMUX_LINE_IN,
693 .gpio = hauppauge_wintv_hvr_900_analog,
694 } },
695 },
696 [EM2861_BOARD_KWORLD_PVRTV_300U] = {
697 .name = "KWorld PVRTV 300U",
698 .valid = EM28XX_BOARD_NOT_VALIDATED,
699 .tuner_type = TUNER_XC2028,
700 .tuner_gpio = default_tuner_gpio,
701 .decoder = EM28XX_TVP5150,
702 .input = { {
703 .type = EM28XX_VMUX_TELEVISION,
704 .vmux = TVP5150_COMPOSITE0,
705 .amux = EM28XX_AMUX_VIDEO,
706 }, {
707 .type = EM28XX_VMUX_COMPOSITE1,
708 .vmux = TVP5150_COMPOSITE1,
709 .amux = EM28XX_AMUX_LINE_IN,
710 }, {
711 .type = EM28XX_VMUX_SVIDEO,
712 .vmux = TVP5150_SVIDEO,
713 .amux = EM28XX_AMUX_LINE_IN,
714 } },
715 },
716 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = {
717 .name = "Yakumo MovieMixer",
718 .tuner_type = TUNER_ABSENT, /* Capture only device */
719 .decoder = EM28XX_TVP5150,
720 .input = { {
721 .type = EM28XX_VMUX_TELEVISION,
722 .vmux = TVP5150_COMPOSITE0,
723 .amux = EM28XX_AMUX_VIDEO,
724 }, {
725 .type = EM28XX_VMUX_COMPOSITE1,
726 .vmux = TVP5150_COMPOSITE1,
727 .amux = EM28XX_AMUX_LINE_IN,
728 }, {
729 .type = EM28XX_VMUX_SVIDEO,
730 .vmux = TVP5150_SVIDEO,
731 .amux = EM28XX_AMUX_LINE_IN,
732 } },
733 },
734 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = {
735 .name = "EM2860/TVP5150 Reference Design",
736 .tuner_type = TUNER_ABSENT, /* Capture only device */
737 .decoder = EM28XX_TVP5150,
738 .input = { {
739 .type = EM28XX_VMUX_COMPOSITE1,
740 .vmux = TVP5150_COMPOSITE1,
741 .amux = EM28XX_AMUX_LINE_IN,
742 }, {
743 .type = EM28XX_VMUX_SVIDEO,
744 .vmux = TVP5150_SVIDEO,
745 .amux = EM28XX_AMUX_LINE_IN,
746 } },
747 },
748 [EM2861_BOARD_PLEXTOR_PX_TV100U] = {
749 .name = "Plextor ConvertX PX-TV100U",
750 .tuner_type = TUNER_TNF_5335MF,
751 .xclk = EM28XX_XCLK_I2S_MSB_TIMING |
752 EM28XX_XCLK_FREQUENCY_12MHZ,
753 .tda9887_conf = TDA9887_PRESENT,
754 .decoder = EM28XX_TVP5150,
755 .has_msp34xx = 1,
756 .input = { {
757 .type = EM28XX_VMUX_TELEVISION,
758 .vmux = TVP5150_COMPOSITE0,
759 .amux = EM28XX_AMUX_LINE_IN,
760 .gpio = pinnacle_hybrid_pro_analog,
761 }, {
762 .type = EM28XX_VMUX_COMPOSITE1,
763 .vmux = TVP5150_COMPOSITE1,
764 .amux = EM28XX_AMUX_LINE_IN,
765 .gpio = pinnacle_hybrid_pro_analog,
766 }, {
767 .type = EM28XX_VMUX_SVIDEO,
768 .vmux = TVP5150_SVIDEO,
769 .amux = EM28XX_AMUX_LINE_IN,
770 .gpio = pinnacle_hybrid_pro_analog,
771 } },
772 },
773
774 /* Those boards with em2870 are DVB Only*/
775
776 [EM2870_BOARD_TERRATEC_XS] = {
777 .name = "Terratec Cinergy T XS",
778 .valid = EM28XX_BOARD_NOT_VALIDATED,
779 .tuner_type = TUNER_XC2028,
780 .tuner_gpio = default_tuner_gpio,
781 },
782 [EM2870_BOARD_TERRATEC_XS_MT2060] = {
783 .name = "Terratec Cinergy T XS (MT2060)",
784 .valid = EM28XX_BOARD_NOT_VALIDATED,
785 .tuner_type = TUNER_ABSENT, /* MT2060 */
786 },
787 [EM2870_BOARD_KWORLD_350U] = {
788 .name = "Kworld 350 U DVB-T",
789 .valid = EM28XX_BOARD_NOT_VALIDATED,
790 .tuner_type = TUNER_XC2028,
791 .tuner_gpio = default_tuner_gpio,
792 },
793 [EM2870_BOARD_KWORLD_355U] = {
794 .name = "Kworld 355 U DVB-T",
795 .valid = EM28XX_BOARD_NOT_VALIDATED,
796 },
797 [EM2870_BOARD_PINNACLE_PCTV_DVB] = {
798 .name = "Pinnacle PCTV DVB-T",
799 .valid = EM28XX_BOARD_NOT_VALIDATED,
800 .tuner_type = TUNER_ABSENT, /* MT2060 */
801 /* djh - I have serious doubts this is right... */
802 .xclk = EM28XX_XCLK_IR_RC5_MODE |
803 EM28XX_XCLK_FREQUENCY_10MHZ,
804 },
805 [EM2870_BOARD_COMPRO_VIDEOMATE] = {
806 .name = "Compro, VideoMate U3",
807 .valid = EM28XX_BOARD_NOT_VALIDATED,
808 .tuner_type = TUNER_ABSENT, /* MT2060 */
809 },
810
811 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = {
812 .name = "Terratec Hybrid XS Secam",
813 .has_msp34xx = 1,
814 .tuner_type = TUNER_XC2028,
815 .tuner_gpio = default_tuner_gpio,
816 .decoder = EM28XX_TVP5150,
817 .has_dvb = 1,
818 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital,
819 .input = { {
820 .type = EM28XX_VMUX_TELEVISION,
821 .vmux = TVP5150_COMPOSITE0,
822 .amux = EM28XX_AMUX_VIDEO,
823 .gpio = terratec_cinergy_USB_XS_FR_analog,
824 }, {
825 .type = EM28XX_VMUX_COMPOSITE1,
826 .vmux = TVP5150_COMPOSITE1,
827 .amux = EM28XX_AMUX_LINE_IN,
828 .gpio = terratec_cinergy_USB_XS_FR_analog,
829 }, {
830 .type = EM28XX_VMUX_SVIDEO,
831 .vmux = TVP5150_SVIDEO,
832 .amux = EM28XX_AMUX_LINE_IN,
833 .gpio = terratec_cinergy_USB_XS_FR_analog,
834 } },
835 },
836 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = {
837 .name = "Hauppauge WinTV HVR 900",
838 .tda9887_conf = TDA9887_PRESENT,
839 .tuner_type = TUNER_XC2028,
840 .tuner_gpio = default_tuner_gpio,
841 .mts_firmware = 1,
842 .has_dvb = 1,
843 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
844 .ir_codes = RC_MAP_HAUPPAUGE,
845 .decoder = EM28XX_TVP5150,
846 .input = { {
847 .type = EM28XX_VMUX_TELEVISION,
848 .vmux = TVP5150_COMPOSITE0,
849 .amux = EM28XX_AMUX_VIDEO,
850 .gpio = hauppauge_wintv_hvr_900_analog,
851 }, {
852 .type = EM28XX_VMUX_COMPOSITE1,
853 .vmux = TVP5150_COMPOSITE1,
854 .amux = EM28XX_AMUX_LINE_IN,
855 .gpio = hauppauge_wintv_hvr_900_analog,
856 }, {
857 .type = EM28XX_VMUX_SVIDEO,
858 .vmux = TVP5150_SVIDEO,
859 .amux = EM28XX_AMUX_LINE_IN,
860 .gpio = hauppauge_wintv_hvr_900_analog,
861 } },
862 },
863 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = {
864 .name = "Hauppauge WinTV HVR 900 (R2)",
865 .tda9887_conf = TDA9887_PRESENT,
866 .tuner_type = TUNER_XC2028,
867 .tuner_gpio = default_tuner_gpio,
868 .mts_firmware = 1,
869 .has_dvb = 1,
870 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital,
871 .ir_codes = RC_MAP_HAUPPAUGE,
872 .decoder = EM28XX_TVP5150,
873 .input = { {
874 .type = EM28XX_VMUX_TELEVISION,
875 .vmux = TVP5150_COMPOSITE0,
876 .amux = EM28XX_AMUX_VIDEO,
877 .gpio = hauppauge_wintv_hvr_900_analog,
878 }, {
879 .type = EM28XX_VMUX_COMPOSITE1,
880 .vmux = TVP5150_COMPOSITE1,
881 .amux = EM28XX_AMUX_LINE_IN,
882 .gpio = hauppauge_wintv_hvr_900_analog,
883 }, {
884 .type = EM28XX_VMUX_SVIDEO,
885 .vmux = TVP5150_SVIDEO,
886 .amux = EM28XX_AMUX_LINE_IN,
887 .gpio = hauppauge_wintv_hvr_900_analog,
888 } },
889 },
890 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = {
891 .name = "Hauppauge WinTV HVR 850",
892 .tuner_type = TUNER_XC2028,
893 .tuner_gpio = default_tuner_gpio,
894 .mts_firmware = 1,
895 .has_dvb = 1,
896 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
897 .ir_codes = RC_MAP_HAUPPAUGE,
898 .decoder = EM28XX_TVP5150,
899 .input = { {
900 .type = EM28XX_VMUX_TELEVISION,
901 .vmux = TVP5150_COMPOSITE0,
902 .amux = EM28XX_AMUX_VIDEO,
903 .gpio = hauppauge_wintv_hvr_900_analog,
904 }, {
905 .type = EM28XX_VMUX_COMPOSITE1,
906 .vmux = TVP5150_COMPOSITE1,
907 .amux = EM28XX_AMUX_LINE_IN,
908 .gpio = hauppauge_wintv_hvr_900_analog,
909 }, {
910 .type = EM28XX_VMUX_SVIDEO,
911 .vmux = TVP5150_SVIDEO,
912 .amux = EM28XX_AMUX_LINE_IN,
913 .gpio = hauppauge_wintv_hvr_900_analog,
914 } },
915 },
916 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = {
917 .name = "Hauppauge WinTV HVR 950",
918 .tuner_type = TUNER_XC2028,
919 .tuner_gpio = default_tuner_gpio,
920 .mts_firmware = 1,
921 .has_dvb = 1,
922 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
923 .ir_codes = RC_MAP_HAUPPAUGE,
924 .decoder = EM28XX_TVP5150,
925 .input = { {
926 .type = EM28XX_VMUX_TELEVISION,
927 .vmux = TVP5150_COMPOSITE0,
928 .amux = EM28XX_AMUX_VIDEO,
929 .gpio = hauppauge_wintv_hvr_900_analog,
930 }, {
931 .type = EM28XX_VMUX_COMPOSITE1,
932 .vmux = TVP5150_COMPOSITE1,
933 .amux = EM28XX_AMUX_LINE_IN,
934 .gpio = hauppauge_wintv_hvr_900_analog,
935 }, {
936 .type = EM28XX_VMUX_SVIDEO,
937 .vmux = TVP5150_SVIDEO,
938 .amux = EM28XX_AMUX_LINE_IN,
939 .gpio = hauppauge_wintv_hvr_900_analog,
940 } },
941 },
942 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = {
943 .name = "Pinnacle PCTV HD Pro Stick",
944 .tuner_type = TUNER_XC2028,
945 .tuner_gpio = default_tuner_gpio,
946 .mts_firmware = 1,
947 .has_dvb = 1,
948 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
949 .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
950 .decoder = EM28XX_TVP5150,
951 .input = { {
952 .type = EM28XX_VMUX_TELEVISION,
953 .vmux = TVP5150_COMPOSITE0,
954 .amux = EM28XX_AMUX_VIDEO,
955 .gpio = hauppauge_wintv_hvr_900_analog,
956 }, {
957 .type = EM28XX_VMUX_COMPOSITE1,
958 .vmux = TVP5150_COMPOSITE1,
959 .amux = EM28XX_AMUX_LINE_IN,
960 .gpio = hauppauge_wintv_hvr_900_analog,
961 }, {
962 .type = EM28XX_VMUX_SVIDEO,
963 .vmux = TVP5150_SVIDEO,
964 .amux = EM28XX_AMUX_LINE_IN,
965 .gpio = hauppauge_wintv_hvr_900_analog,
966 } },
967 },
968 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = {
969 .name = "AMD ATI TV Wonder HD 600",
970 .tuner_type = TUNER_XC2028,
971 .tuner_gpio = default_tuner_gpio,
972 .mts_firmware = 1,
973 .has_dvb = 1,
974 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
975 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600,
976 .decoder = EM28XX_TVP5150,
977 .input = { {
978 .type = EM28XX_VMUX_TELEVISION,
979 .vmux = TVP5150_COMPOSITE0,
980 .amux = EM28XX_AMUX_VIDEO,
981 .gpio = hauppauge_wintv_hvr_900_analog,
982 }, {
983 .type = EM28XX_VMUX_COMPOSITE1,
984 .vmux = TVP5150_COMPOSITE1,
985 .amux = EM28XX_AMUX_LINE_IN,
986 .gpio = hauppauge_wintv_hvr_900_analog,
987 }, {
988 .type = EM28XX_VMUX_SVIDEO,
989 .vmux = TVP5150_SVIDEO,
990 .amux = EM28XX_AMUX_LINE_IN,
991 .gpio = hauppauge_wintv_hvr_900_analog,
992 } },
993 },
994 [EM2880_BOARD_TERRATEC_HYBRID_XS] = {
995 .name = "Terratec Hybrid XS",
996 .tuner_type = TUNER_XC2028,
997 .tuner_gpio = default_tuner_gpio,
998 .decoder = EM28XX_TVP5150,
999 .has_dvb = 1,
1000 .dvb_gpio = default_digital,
1001 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1002 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1003 .input = { {
1004 .type = EM28XX_VMUX_TELEVISION,
1005 .vmux = TVP5150_COMPOSITE0,
1006 .amux = EM28XX_AMUX_VIDEO,
1007 .gpio = default_analog,
1008 }, {
1009 .type = EM28XX_VMUX_COMPOSITE1,
1010 .vmux = TVP5150_COMPOSITE1,
1011 .amux = EM28XX_AMUX_LINE_IN,
1012 .gpio = default_analog,
1013 }, {
1014 .type = EM28XX_VMUX_SVIDEO,
1015 .vmux = TVP5150_SVIDEO,
1016 .amux = EM28XX_AMUX_LINE_IN,
1017 .gpio = default_analog,
1018 } },
1019 },
1020 /* maybe there's a reason behind it why Terratec sells the Hybrid XS
1021 as Prodigy XS with a different PID, let's keep it separated for now
1022 maybe we'll need it lateron */
1023 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
1024 .name = "Terratec Prodigy XS",
1025 .tuner_type = TUNER_XC2028,
1026 .tuner_gpio = default_tuner_gpio,
1027 .decoder = EM28XX_TVP5150,
1028 .input = { {
1029 .type = EM28XX_VMUX_TELEVISION,
1030 .vmux = TVP5150_COMPOSITE0,
1031 .amux = EM28XX_AMUX_VIDEO,
1032 .gpio = hauppauge_wintv_hvr_900_analog,
1033 }, {
1034 .type = EM28XX_VMUX_COMPOSITE1,
1035 .vmux = TVP5150_COMPOSITE1,
1036 .amux = EM28XX_AMUX_LINE_IN,
1037 .gpio = hauppauge_wintv_hvr_900_analog,
1038 }, {
1039 .type = EM28XX_VMUX_SVIDEO,
1040 .vmux = TVP5150_SVIDEO,
1041 .amux = EM28XX_AMUX_LINE_IN,
1042 .gpio = hauppauge_wintv_hvr_900_analog,
1043 } },
1044 },
1045 [EM2820_BOARD_MSI_VOX_USB_2] = {
1046 .name = "MSI VOX USB 2.0",
1047 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1048 .tda9887_conf = TDA9887_PRESENT |
1049 TDA9887_PORT1_ACTIVE |
1050 TDA9887_PORT2_ACTIVE,
1051 .max_range_640_480 = 1,
1052 .decoder = EM28XX_SAA711X,
1053 .input = { {
1054 .type = EM28XX_VMUX_TELEVISION,
1055 .vmux = SAA7115_COMPOSITE4,
1056 .amux = EM28XX_AMUX_VIDEO,
1057 }, {
1058 .type = EM28XX_VMUX_COMPOSITE1,
1059 .vmux = SAA7115_COMPOSITE0,
1060 .amux = EM28XX_AMUX_LINE_IN,
1061 }, {
1062 .type = EM28XX_VMUX_SVIDEO,
1063 .vmux = SAA7115_SVIDEO3,
1064 .amux = EM28XX_AMUX_LINE_IN,
1065 } },
1066 },
1067 [EM2800_BOARD_TERRATEC_CINERGY_200] = {
1068 .name = "Terratec Cinergy 200 USB",
1069 .is_em2800 = 1,
1070 .has_ir_i2c = 1,
1071 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1072 .tda9887_conf = TDA9887_PRESENT,
1073 .decoder = EM28XX_SAA711X,
1074 .input = { {
1075 .type = EM28XX_VMUX_TELEVISION,
1076 .vmux = SAA7115_COMPOSITE2,
1077 .amux = EM28XX_AMUX_VIDEO,
1078 }, {
1079 .type = EM28XX_VMUX_COMPOSITE1,
1080 .vmux = SAA7115_COMPOSITE0,
1081 .amux = EM28XX_AMUX_LINE_IN,
1082 }, {
1083 .type = EM28XX_VMUX_SVIDEO,
1084 .vmux = SAA7115_SVIDEO3,
1085 .amux = EM28XX_AMUX_LINE_IN,
1086 } },
1087 },
1088 [EM2800_BOARD_GRABBEEX_USB2800] = {
1089 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder",
1090 .is_em2800 = 1,
1091 .decoder = EM28XX_SAA711X,
1092 .tuner_type = TUNER_ABSENT, /* capture only board */
1093 .input = { {
1094 .type = EM28XX_VMUX_COMPOSITE1,
1095 .vmux = SAA7115_COMPOSITE0,
1096 .amux = EM28XX_AMUX_LINE_IN,
1097 }, {
1098 .type = EM28XX_VMUX_SVIDEO,
1099 .vmux = SAA7115_SVIDEO3,
1100 .amux = EM28XX_AMUX_LINE_IN,
1101 } },
1102 },
1103 [EM2800_BOARD_VC211A] = {
1104 .name = "Actionmaster/LinXcel/Digitus VC211A",
1105 .is_em2800 = 1,
1106 .tuner_type = TUNER_ABSENT, /* Capture-only board */
1107 .decoder = EM28XX_SAA711X,
1108 .input = { {
1109 .type = EM28XX_VMUX_COMPOSITE1,
1110 .vmux = SAA7115_COMPOSITE0,
1111 .amux = EM28XX_AMUX_LINE_IN,
1112 .gpio = vc211a_enable,
1113 }, {
1114 .type = EM28XX_VMUX_SVIDEO,
1115 .vmux = SAA7115_SVIDEO3,
1116 .amux = EM28XX_AMUX_LINE_IN,
1117 .gpio = vc211a_enable,
1118 } },
1119 },
1120 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = {
1121 .name = "Leadtek Winfast USB II",
1122 .is_em2800 = 1,
1123 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1124 .tda9887_conf = TDA9887_PRESENT,
1125 .decoder = EM28XX_SAA711X,
1126 .input = { {
1127 .type = EM28XX_VMUX_TELEVISION,
1128 .vmux = SAA7115_COMPOSITE2,
1129 .amux = EM28XX_AMUX_VIDEO,
1130 }, {
1131 .type = EM28XX_VMUX_COMPOSITE1,
1132 .vmux = SAA7115_COMPOSITE0,
1133 .amux = EM28XX_AMUX_LINE_IN,
1134 }, {
1135 .type = EM28XX_VMUX_SVIDEO,
1136 .vmux = SAA7115_SVIDEO3,
1137 .amux = EM28XX_AMUX_LINE_IN,
1138 } },
1139 },
1140 [EM2800_BOARD_KWORLD_USB2800] = {
1141 .name = "Kworld USB2800",
1142 .is_em2800 = 1,
1143 .tuner_type = TUNER_PHILIPS_FCV1236D,
1144 .tda9887_conf = TDA9887_PRESENT,
1145 .decoder = EM28XX_SAA711X,
1146 .input = { {
1147 .type = EM28XX_VMUX_TELEVISION,
1148 .vmux = SAA7115_COMPOSITE2,
1149 .amux = EM28XX_AMUX_VIDEO,
1150 }, {
1151 .type = EM28XX_VMUX_COMPOSITE1,
1152 .vmux = SAA7115_COMPOSITE0,
1153 .amux = EM28XX_AMUX_LINE_IN,
1154 }, {
1155 .type = EM28XX_VMUX_SVIDEO,
1156 .vmux = SAA7115_SVIDEO3,
1157 .amux = EM28XX_AMUX_LINE_IN,
1158 } },
1159 },
1160 [EM2820_BOARD_PINNACLE_DVC_90] = {
1161 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker "
1162 "/ Kworld DVD Maker 2",
1163 .tuner_type = TUNER_ABSENT, /* capture only board */
1164 .decoder = EM28XX_SAA711X,
1165 .input = { {
1166 .type = EM28XX_VMUX_COMPOSITE1,
1167 .vmux = SAA7115_COMPOSITE0,
1168 .amux = EM28XX_AMUX_LINE_IN,
1169 }, {
1170 .type = EM28XX_VMUX_SVIDEO,
1171 .vmux = SAA7115_SVIDEO3,
1172 .amux = EM28XX_AMUX_LINE_IN,
1173 } },
1174 },
1175 [EM2800_BOARD_VGEAR_POCKETTV] = {
1176 .name = "V-Gear PocketTV",
1177 .is_em2800 = 1,
1178 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1179 .tda9887_conf = TDA9887_PRESENT,
1180 .decoder = EM28XX_SAA711X,
1181 .input = { {
1182 .type = EM28XX_VMUX_TELEVISION,
1183 .vmux = SAA7115_COMPOSITE2,
1184 .amux = EM28XX_AMUX_VIDEO,
1185 }, {
1186 .type = EM28XX_VMUX_COMPOSITE1,
1187 .vmux = SAA7115_COMPOSITE0,
1188 .amux = EM28XX_AMUX_LINE_IN,
1189 }, {
1190 .type = EM28XX_VMUX_SVIDEO,
1191 .vmux = SAA7115_SVIDEO3,
1192 .amux = EM28XX_AMUX_LINE_IN,
1193 } },
1194 },
1195 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = {
1196 .name = "Pixelview PlayTV Box 4 USB 2.0",
1197 .tda9887_conf = TDA9887_PRESENT,
1198 .tuner_type = TUNER_YMEC_TVF_5533MF,
1199 .decoder = EM28XX_SAA711X,
1200 .input = { {
1201 .type = EM28XX_VMUX_TELEVISION,
1202 .vmux = SAA7115_COMPOSITE2,
1203 .amux = EM28XX_AMUX_VIDEO,
1204 .aout = EM28XX_AOUT_MONO | /* I2S */
1205 EM28XX_AOUT_MASTER, /* Line out pin */
1206 }, {
1207 .type = EM28XX_VMUX_COMPOSITE1,
1208 .vmux = SAA7115_COMPOSITE0,
1209 .amux = EM28XX_AMUX_LINE_IN,
1210 }, {
1211 .type = EM28XX_VMUX_SVIDEO,
1212 .vmux = SAA7115_SVIDEO3,
1213 .amux = EM28XX_AMUX_LINE_IN,
1214 } },
1215 },
1216 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = {
1217 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0",
1218 .has_snapshot_button = 1,
1219 .tda9887_conf = TDA9887_PRESENT,
1220 .tuner_type = TUNER_YMEC_TVF_5533MF,
1221 .decoder = EM28XX_SAA711X,
1222 .input = { {
1223 .type = EM28XX_VMUX_TELEVISION,
1224 .vmux = SAA7115_COMPOSITE2,
1225 .amux = EM28XX_AMUX_VIDEO,
1226 .aout = EM28XX_AOUT_MONO | /* I2S */
1227 EM28XX_AOUT_MASTER, /* Line out pin */
1228 }, {
1229 .type = EM28XX_VMUX_COMPOSITE1,
1230 .vmux = SAA7115_COMPOSITE0,
1231 .amux = EM28XX_AMUX_LINE_IN,
1232 }, {
1233 .type = EM28XX_VMUX_SVIDEO,
1234 .vmux = SAA7115_SVIDEO3,
1235 .amux = EM28XX_AMUX_LINE_IN,
1236 } },
1237 },
1238 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = {
1239 .name = "EM2860/SAA711X Reference Design",
1240 .has_snapshot_button = 1,
1241 .tuner_type = TUNER_ABSENT,
1242 .decoder = EM28XX_SAA711X,
1243 .input = { {
1244 .type = EM28XX_VMUX_SVIDEO,
1245 .vmux = SAA7115_SVIDEO3,
1246 }, {
1247 .type = EM28XX_VMUX_COMPOSITE1,
1248 .vmux = SAA7115_COMPOSITE0,
1249 } },
1250 },
1251
1252 [EM2874_LEADERSHIP_ISDBT] = {
1253 .i2c_speed = EM2874_I2C_SECONDARY_BUS_SELECT |
1254 EM28XX_I2C_CLK_WAIT_ENABLE |
1255 EM28XX_I2C_FREQ_100_KHZ,
1256 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ,
1257 .name = "EM2874 Leadership ISDBT",
1258 .tuner_type = TUNER_ABSENT,
1259 .tuner_gpio = leadership_reset,
1260 .dvb_gpio = leadership_digital,
1261 .has_dvb = 1,
1262 },
1263
1264 [EM2880_BOARD_MSI_DIGIVOX_AD] = {
1265 .name = "MSI DigiVox A/D",
1266 .valid = EM28XX_BOARD_NOT_VALIDATED,
1267 .tuner_type = TUNER_XC2028,
1268 .tuner_gpio = default_tuner_gpio,
1269 .decoder = EM28XX_TVP5150,
1270 .input = { {
1271 .type = EM28XX_VMUX_TELEVISION,
1272 .vmux = TVP5150_COMPOSITE0,
1273 .amux = EM28XX_AMUX_VIDEO,
1274 .gpio = em2880_msi_digivox_ad_analog,
1275 }, {
1276 .type = EM28XX_VMUX_COMPOSITE1,
1277 .vmux = TVP5150_COMPOSITE1,
1278 .amux = EM28XX_AMUX_LINE_IN,
1279 .gpio = em2880_msi_digivox_ad_analog,
1280 }, {
1281 .type = EM28XX_VMUX_SVIDEO,
1282 .vmux = TVP5150_SVIDEO,
1283 .amux = EM28XX_AMUX_LINE_IN,
1284 .gpio = em2880_msi_digivox_ad_analog,
1285 } },
1286 },
1287 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = {
1288 .name = "MSI DigiVox A/D II",
1289 .valid = EM28XX_BOARD_NOT_VALIDATED,
1290 .tuner_type = TUNER_XC2028,
1291 .tuner_gpio = default_tuner_gpio,
1292 .decoder = EM28XX_TVP5150,
1293 .input = { {
1294 .type = EM28XX_VMUX_TELEVISION,
1295 .vmux = TVP5150_COMPOSITE0,
1296 .amux = EM28XX_AMUX_VIDEO,
1297 .gpio = em2880_msi_digivox_ad_analog,
1298 }, {
1299 .type = EM28XX_VMUX_COMPOSITE1,
1300 .vmux = TVP5150_COMPOSITE1,
1301 .amux = EM28XX_AMUX_LINE_IN,
1302 .gpio = em2880_msi_digivox_ad_analog,
1303 }, {
1304 .type = EM28XX_VMUX_SVIDEO,
1305 .vmux = TVP5150_SVIDEO,
1306 .amux = EM28XX_AMUX_LINE_IN,
1307 .gpio = em2880_msi_digivox_ad_analog,
1308 } },
1309 },
1310 [EM2880_BOARD_KWORLD_DVB_305U] = {
1311 .name = "KWorld DVB-T 305U",
1312 .valid = EM28XX_BOARD_NOT_VALIDATED,
1313 .tuner_type = TUNER_XC2028,
1314 .tuner_gpio = default_tuner_gpio,
1315 .decoder = EM28XX_TVP5150,
1316 .input = { {
1317 .type = EM28XX_VMUX_TELEVISION,
1318 .vmux = TVP5150_COMPOSITE0,
1319 .amux = EM28XX_AMUX_VIDEO,
1320 }, {
1321 .type = EM28XX_VMUX_COMPOSITE1,
1322 .vmux = TVP5150_COMPOSITE1,
1323 .amux = EM28XX_AMUX_LINE_IN,
1324 }, {
1325 .type = EM28XX_VMUX_SVIDEO,
1326 .vmux = TVP5150_SVIDEO,
1327 .amux = EM28XX_AMUX_LINE_IN,
1328 } },
1329 },
1330 [EM2880_BOARD_KWORLD_DVB_310U] = {
1331 .name = "KWorld DVB-T 310U",
1332 .tuner_type = TUNER_XC2028,
1333 .tuner_gpio = default_tuner_gpio,
1334 .has_dvb = 1,
1335 .dvb_gpio = default_digital,
1336 .mts_firmware = 1,
1337 .decoder = EM28XX_TVP5150,
1338 .input = { {
1339 .type = EM28XX_VMUX_TELEVISION,
1340 .vmux = TVP5150_COMPOSITE0,
1341 .amux = EM28XX_AMUX_VIDEO,
1342 .gpio = default_analog,
1343 }, {
1344 .type = EM28XX_VMUX_COMPOSITE1,
1345 .vmux = TVP5150_COMPOSITE1,
1346 .amux = EM28XX_AMUX_LINE_IN,
1347 .gpio = default_analog,
1348 }, { /* S-video has not been tested yet */
1349 .type = EM28XX_VMUX_SVIDEO,
1350 .vmux = TVP5150_SVIDEO,
1351 .amux = EM28XX_AMUX_LINE_IN,
1352 .gpio = default_analog,
1353 } },
1354 },
1355 [EM2882_BOARD_KWORLD_ATSC_315U] = {
1356 .name = "KWorld ATSC 315U HDTV TV Box",
1357 .valid = EM28XX_BOARD_NOT_VALIDATED,
1358 .tuner_type = TUNER_THOMSON_DTT761X,
1359 .tuner_gpio = em2882_kworld_315u_tuner_gpio,
1360 .tda9887_conf = TDA9887_PRESENT,
1361 .decoder = EM28XX_SAA711X,
1362 .has_dvb = 1,
1363 .dvb_gpio = em2882_kworld_315u_digital,
1364 .ir_codes = RC_MAP_KWORLD_315U,
1365 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1366 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
1367 /* Analog mode - still not ready */
1368 /*.input = { {
1369 .type = EM28XX_VMUX_TELEVISION,
1370 .vmux = SAA7115_COMPOSITE2,
1371 .amux = EM28XX_AMUX_VIDEO,
1372 .gpio = em2882_kworld_315u_analog,
1373 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1374 }, {
1375 .type = EM28XX_VMUX_COMPOSITE1,
1376 .vmux = SAA7115_COMPOSITE0,
1377 .amux = EM28XX_AMUX_LINE_IN,
1378 .gpio = em2882_kworld_315u_analog1,
1379 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1380 }, {
1381 .type = EM28XX_VMUX_SVIDEO,
1382 .vmux = SAA7115_SVIDEO3,
1383 .amux = EM28XX_AMUX_LINE_IN,
1384 .gpio = em2882_kworld_315u_analog1,
1385 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1386 } }, */
1387 },
1388 [EM2880_BOARD_EMPIRE_DUAL_TV] = {
1389 .name = "Empire dual TV",
1390 .tuner_type = TUNER_XC2028,
1391 .tuner_gpio = default_tuner_gpio,
1392 .has_dvb = 1,
1393 .dvb_gpio = default_digital,
1394 .mts_firmware = 1,
1395 .decoder = EM28XX_TVP5150,
1396 .input = { {
1397 .type = EM28XX_VMUX_TELEVISION,
1398 .vmux = TVP5150_COMPOSITE0,
1399 .amux = EM28XX_AMUX_VIDEO,
1400 .gpio = default_analog,
1401 }, {
1402 .type = EM28XX_VMUX_COMPOSITE1,
1403 .vmux = TVP5150_COMPOSITE1,
1404 .amux = EM28XX_AMUX_LINE_IN,
1405 .gpio = default_analog,
1406 }, {
1407 .type = EM28XX_VMUX_SVIDEO,
1408 .vmux = TVP5150_SVIDEO,
1409 .amux = EM28XX_AMUX_LINE_IN,
1410 .gpio = default_analog,
1411 } },
1412 },
1413 [EM2881_BOARD_DNT_DA2_HYBRID] = {
1414 .name = "DNT DA2 Hybrid",
1415 .valid = EM28XX_BOARD_NOT_VALIDATED,
1416 .tuner_type = TUNER_XC2028,
1417 .tuner_gpio = default_tuner_gpio,
1418 .decoder = EM28XX_TVP5150,
1419 .input = { {
1420 .type = EM28XX_VMUX_TELEVISION,
1421 .vmux = TVP5150_COMPOSITE0,
1422 .amux = EM28XX_AMUX_VIDEO,
1423 .gpio = default_analog,
1424 }, {
1425 .type = EM28XX_VMUX_COMPOSITE1,
1426 .vmux = TVP5150_COMPOSITE1,
1427 .amux = EM28XX_AMUX_LINE_IN,
1428 .gpio = default_analog,
1429 }, {
1430 .type = EM28XX_VMUX_SVIDEO,
1431 .vmux = TVP5150_SVIDEO,
1432 .amux = EM28XX_AMUX_LINE_IN,
1433 .gpio = default_analog,
1434 } },
1435 },
1436 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
1437 .name = "Pinnacle Hybrid Pro",
1438 .tuner_type = TUNER_XC2028,
1439 .tuner_gpio = default_tuner_gpio,
1440 .decoder = EM28XX_TVP5150,
1441 .has_dvb = 1,
1442 .dvb_gpio = pinnacle_hybrid_pro_digital,
1443 .input = { {
1444 .type = EM28XX_VMUX_TELEVISION,
1445 .vmux = TVP5150_COMPOSITE0,
1446 .amux = EM28XX_AMUX_VIDEO,
1447 .gpio = pinnacle_hybrid_pro_analog,
1448 }, {
1449 .type = EM28XX_VMUX_COMPOSITE1,
1450 .vmux = TVP5150_COMPOSITE1,
1451 .amux = EM28XX_AMUX_LINE_IN,
1452 .gpio = pinnacle_hybrid_pro_analog,
1453 }, {
1454 .type = EM28XX_VMUX_SVIDEO,
1455 .vmux = TVP5150_SVIDEO,
1456 .amux = EM28XX_AMUX_LINE_IN,
1457 .gpio = pinnacle_hybrid_pro_analog,
1458 } },
1459 },
1460 [EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
1461 .name = "Pinnacle Hybrid Pro (2)",
1462 .valid = EM28XX_BOARD_NOT_VALIDATED,
1463 .tuner_type = TUNER_XC2028,
1464 .tuner_gpio = default_tuner_gpio,
1465 .mts_firmware = 1,
1466 .decoder = EM28XX_TVP5150,
1467 .input = { {
1468 .type = EM28XX_VMUX_TELEVISION,
1469 .vmux = TVP5150_COMPOSITE0,
1470 .amux = EM28XX_AMUX_VIDEO,
1471 .gpio = hauppauge_wintv_hvr_900_analog,
1472 }, {
1473 .type = EM28XX_VMUX_COMPOSITE1,
1474 .vmux = TVP5150_COMPOSITE1,
1475 .amux = EM28XX_AMUX_LINE_IN,
1476 .gpio = hauppauge_wintv_hvr_900_analog,
1477 }, {
1478 .type = EM28XX_VMUX_SVIDEO,
1479 .vmux = TVP5150_SVIDEO,
1480 .amux = EM28XX_AMUX_LINE_IN,
1481 .gpio = hauppauge_wintv_hvr_900_analog,
1482 } },
1483 },
1484 [EM2882_BOARD_KWORLD_VS_DVBT] = {
1485 .name = "Kworld VS-DVB-T 323UR",
1486 .tuner_type = TUNER_XC2028,
1487 .tuner_gpio = default_tuner_gpio,
1488 .decoder = EM28XX_TVP5150,
1489 .mts_firmware = 1,
1490 .has_dvb = 1,
1491 .dvb_gpio = kworld_330u_digital,
1492 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1493 .ir_codes = RC_MAP_KWORLD_315U,
1494 .input = { {
1495 .type = EM28XX_VMUX_TELEVISION,
1496 .vmux = TVP5150_COMPOSITE0,
1497 .amux = EM28XX_AMUX_VIDEO,
1498 }, {
1499 .type = EM28XX_VMUX_COMPOSITE1,
1500 .vmux = TVP5150_COMPOSITE1,
1501 .amux = EM28XX_AMUX_LINE_IN,
1502 }, {
1503 .type = EM28XX_VMUX_SVIDEO,
1504 .vmux = TVP5150_SVIDEO,
1505 .amux = EM28XX_AMUX_LINE_IN,
1506 } },
1507 },
1508 [EM2882_BOARD_TERRATEC_HYBRID_XS] = {
1509 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)",
1510 .tuner_type = TUNER_XC2028,
1511 .tuner_gpio = default_tuner_gpio,
1512 .mts_firmware = 1,
1513 .decoder = EM28XX_TVP5150,
1514 .has_dvb = 1,
1515 .dvb_gpio = hauppauge_wintv_hvr_900_digital,
1516 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS,
1517 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1518 .input = { {
1519 .type = EM28XX_VMUX_TELEVISION,
1520 .vmux = TVP5150_COMPOSITE0,
1521 .amux = EM28XX_AMUX_VIDEO,
1522 .gpio = hauppauge_wintv_hvr_900_analog,
1523 }, {
1524 .type = EM28XX_VMUX_COMPOSITE1,
1525 .vmux = TVP5150_COMPOSITE1,
1526 .amux = EM28XX_AMUX_LINE_IN,
1527 .gpio = hauppauge_wintv_hvr_900_analog,
1528 }, {
1529 .type = EM28XX_VMUX_SVIDEO,
1530 .vmux = TVP5150_SVIDEO,
1531 .amux = EM28XX_AMUX_LINE_IN,
1532 .gpio = hauppauge_wintv_hvr_900_analog,
1533 } },
1534 },
1535 [EM2882_BOARD_DIKOM_DK300] = {
1536 .name = "Dikom DK300",
1537 .tuner_type = TUNER_XC2028,
1538 .tuner_gpio = default_tuner_gpio,
1539 .decoder = EM28XX_TVP5150,
1540 .mts_firmware = 1,
1541 .has_dvb = 1,
1542 .dvb_gpio = dikom_dk300_digital,
1543 .input = { {
1544 .type = EM28XX_VMUX_TELEVISION,
1545 .vmux = TVP5150_COMPOSITE0,
1546 .amux = EM28XX_AMUX_VIDEO,
1547 .gpio = default_analog,
1548 } },
1549 },
1550 [EM2883_BOARD_KWORLD_HYBRID_330U] = {
1551 .name = "Kworld PlusTV HD Hybrid 330",
1552 .tuner_type = TUNER_XC2028,
1553 .tuner_gpio = default_tuner_gpio,
1554 .decoder = EM28XX_TVP5150,
1555 .mts_firmware = 1,
1556 .has_dvb = 1,
1557 .dvb_gpio = kworld_330u_digital,
1558 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1559 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1560 EM28XX_I2C_EEPROM_ON_BOARD |
1561 EM28XX_I2C_EEPROM_KEY_VALID,
1562 .input = { {
1563 .type = EM28XX_VMUX_TELEVISION,
1564 .vmux = TVP5150_COMPOSITE0,
1565 .amux = EM28XX_AMUX_VIDEO,
1566 .gpio = kworld_330u_analog,
1567 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1568 }, {
1569 .type = EM28XX_VMUX_COMPOSITE1,
1570 .vmux = TVP5150_COMPOSITE1,
1571 .amux = EM28XX_AMUX_LINE_IN,
1572 .gpio = kworld_330u_analog,
1573 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
1574 }, {
1575 .type = EM28XX_VMUX_SVIDEO,
1576 .vmux = TVP5150_SVIDEO,
1577 .amux = EM28XX_AMUX_LINE_IN,
1578 .gpio = kworld_330u_analog,
1579 } },
1580 },
1581 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = {
1582 .name = "Compro VideoMate ForYou/Stereo",
1583 .tuner_type = TUNER_LG_PAL_NEW_TAPC,
1584 .tvaudio_addr = 0xb0,
1585 .tda9887_conf = TDA9887_PRESENT,
1586 .decoder = EM28XX_TVP5150,
1587 .adecoder = EM28XX_TVAUDIO,
1588 .mute_gpio = compro_mute_gpio,
1589 .input = { {
1590 .type = EM28XX_VMUX_TELEVISION,
1591 .vmux = TVP5150_COMPOSITE0,
1592 .amux = EM28XX_AMUX_VIDEO,
1593 .gpio = compro_unmute_tv_gpio,
1594 }, {
1595 .type = EM28XX_VMUX_SVIDEO,
1596 .vmux = TVP5150_SVIDEO,
1597 .amux = EM28XX_AMUX_LINE_IN,
1598 .gpio = compro_unmute_svid_gpio,
1599 } },
1600 },
1601 [EM2860_BOARD_KAIOMY_TVNPC_U2] = {
1602 .name = "Kaiomy TVnPC U2",
1603 .vchannels = 3,
1604 .tuner_type = TUNER_XC2028,
1605 .tuner_addr = 0x61,
1606 .mts_firmware = 1,
1607 .decoder = EM28XX_TVP5150,
1608 .tuner_gpio = default_tuner_gpio,
1609 .ir_codes = RC_MAP_KAIOMY,
1610 .input = { {
1611 .type = EM28XX_VMUX_TELEVISION,
1612 .vmux = TVP5150_COMPOSITE0,
1613 .amux = EM28XX_AMUX_VIDEO,
1614
1615 }, {
1616 .type = EM28XX_VMUX_COMPOSITE1,
1617 .vmux = TVP5150_COMPOSITE1,
1618 .amux = EM28XX_AMUX_LINE_IN,
1619 }, {
1620 .type = EM28XX_VMUX_SVIDEO,
1621 .vmux = TVP5150_SVIDEO,
1622 .amux = EM28XX_AMUX_LINE_IN,
1623 } },
1624 .radio = {
1625 .type = EM28XX_RADIO,
1626 .amux = EM28XX_AMUX_LINE_IN,
1627 }
1628 },
1629 [EM2860_BOARD_EASYCAP] = {
1630 .name = "Easy Cap Capture DC-60",
1631 .vchannels = 2,
1632 .tuner_type = TUNER_ABSENT,
1633 .decoder = EM28XX_SAA711X,
1634 .input = { {
1635 .type = EM28XX_VMUX_COMPOSITE1,
1636 .vmux = SAA7115_COMPOSITE0,
1637 .amux = EM28XX_AMUX_LINE_IN,
1638 }, {
1639 .type = EM28XX_VMUX_SVIDEO,
1640 .vmux = SAA7115_SVIDEO3,
1641 .amux = EM28XX_AMUX_LINE_IN,
1642 } },
1643 },
1644 [EM2820_BOARD_IODATA_GVMVP_SZ] = {
1645 .name = "IO-DATA GV-MVP/SZ",
1646 .tuner_type = TUNER_PHILIPS_FM1236_MK3,
1647 .tuner_gpio = default_tuner_gpio,
1648 .tda9887_conf = TDA9887_PRESENT,
1649 .decoder = EM28XX_TVP5150,
1650 .input = { {
1651 .type = EM28XX_VMUX_TELEVISION,
1652 .vmux = TVP5150_COMPOSITE0,
1653 .amux = EM28XX_AMUX_VIDEO,
1654 }, { /* Composite has not been tested yet */
1655 .type = EM28XX_VMUX_COMPOSITE1,
1656 .vmux = TVP5150_COMPOSITE1,
1657 .amux = EM28XX_AMUX_VIDEO,
1658 }, { /* S-video has not been tested yet */
1659 .type = EM28XX_VMUX_SVIDEO,
1660 .vmux = TVP5150_SVIDEO,
1661 .amux = EM28XX_AMUX_VIDEO,
1662 } },
1663 },
1664 [EM2860_BOARD_TERRATEC_GRABBY] = {
1665 .name = "Terratec Grabby",
1666 .vchannels = 2,
1667 .tuner_type = TUNER_ABSENT,
1668 .decoder = EM28XX_SAA711X,
1669 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1670 .input = { {
1671 .type = EM28XX_VMUX_COMPOSITE1,
1672 .vmux = SAA7115_COMPOSITE0,
1673 .amux = EM28XX_AMUX_LINE_IN,
1674 }, {
1675 .type = EM28XX_VMUX_SVIDEO,
1676 .vmux = SAA7115_SVIDEO3,
1677 .amux = EM28XX_AMUX_LINE_IN,
1678 } },
1679 },
1680 [EM2860_BOARD_TERRATEC_AV350] = {
1681 .name = "Terratec AV350",
1682 .vchannels = 2,
1683 .tuner_type = TUNER_ABSENT,
1684 .decoder = EM28XX_TVP5150,
1685 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
1686 .mute_gpio = terratec_av350_mute_gpio,
1687 .input = { {
1688 .type = EM28XX_VMUX_COMPOSITE1,
1689 .vmux = TVP5150_COMPOSITE1,
1690 .amux = EM28XX_AUDIO_SRC_LINE,
1691 .gpio = terratec_av350_unmute_gpio,
1692
1693 }, {
1694 .type = EM28XX_VMUX_SVIDEO,
1695 .vmux = TVP5150_SVIDEO,
1696 .amux = EM28XX_AUDIO_SRC_LINE,
1697 .gpio = terratec_av350_unmute_gpio,
1698 } },
1699 },
1700
1701 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = {
1702 .name = "Elgato Video Capture",
1703 .decoder = EM28XX_SAA711X,
1704 .tuner_type = TUNER_ABSENT, /* Capture only device */
1705 .input = { {
1706 .type = EM28XX_VMUX_COMPOSITE1,
1707 .vmux = SAA7115_COMPOSITE0,
1708 .amux = EM28XX_AMUX_LINE_IN,
1709 }, {
1710 .type = EM28XX_VMUX_SVIDEO,
1711 .vmux = SAA7115_SVIDEO3,
1712 .amux = EM28XX_AMUX_LINE_IN,
1713 } },
1714 },
1715
1716 [EM2882_BOARD_EVGA_INDTUBE] = {
1717 .name = "Evga inDtube",
1718 .tuner_type = TUNER_XC2028,
1719 .tuner_gpio = default_tuner_gpio,
1720 .decoder = EM28XX_TVP5150,
1721 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */
1722 .mts_firmware = 1,
1723 .has_dvb = 1,
1724 .dvb_gpio = evga_indtube_digital,
1725 .ir_codes = RC_MAP_EVGA_INDTUBE,
1726 .input = { {
1727 .type = EM28XX_VMUX_TELEVISION,
1728 .vmux = TVP5150_COMPOSITE0,
1729 .amux = EM28XX_AMUX_VIDEO,
1730 .gpio = evga_indtube_analog,
1731 }, {
1732 .type = EM28XX_VMUX_COMPOSITE1,
1733 .vmux = TVP5150_COMPOSITE1,
1734 .amux = EM28XX_AMUX_LINE_IN,
1735 .gpio = evga_indtube_analog,
1736 }, {
1737 .type = EM28XX_VMUX_SVIDEO,
1738 .vmux = TVP5150_SVIDEO,
1739 .amux = EM28XX_AMUX_LINE_IN,
1740 .gpio = evga_indtube_analog,
1741 } },
1742 },
1743 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 +
1744 Infineon TUA6034) */
1745 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
1746 .name = "Reddo DVB-C USB TV Box",
1747 .tuner_type = TUNER_ABSENT,
1748 .tuner_gpio = reddo_dvb_c_usb_box,
1749 .has_dvb = 1,
1750 },
1751 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
1752 * initially as the KWorld PlusTV 340U, then as the UB435-Q.
1753 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */
1754 [EM2870_BOARD_KWORLD_A340] = {
1755 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
1756 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
1757 .has_dvb = 1,
1758 .dvb_gpio = kworld_a340_digital,
1759 .tuner_gpio = default_tuner_gpio,
1760 },
1761 };
1762 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards);
1763
1764 /* table of devices that work with this driver */
1765 struct usb_device_id em28xx_id_table[] = {
1766 { USB_DEVICE(0xeb1a, 0x2750),
1767 .driver_info = EM2750_BOARD_UNKNOWN },
1768 { USB_DEVICE(0xeb1a, 0x2751),
1769 .driver_info = EM2750_BOARD_UNKNOWN },
1770 { USB_DEVICE(0xeb1a, 0x2800),
1771 .driver_info = EM2800_BOARD_UNKNOWN },
1772 { USB_DEVICE(0xeb1a, 0x2710),
1773 .driver_info = EM2820_BOARD_UNKNOWN },
1774 { USB_DEVICE(0xeb1a, 0x2820),
1775 .driver_info = EM2820_BOARD_UNKNOWN },
1776 { USB_DEVICE(0xeb1a, 0x2821),
1777 .driver_info = EM2820_BOARD_UNKNOWN },
1778 { USB_DEVICE(0xeb1a, 0x2860),
1779 .driver_info = EM2820_BOARD_UNKNOWN },
1780 { USB_DEVICE(0xeb1a, 0x2861),
1781 .driver_info = EM2820_BOARD_UNKNOWN },
1782 { USB_DEVICE(0xeb1a, 0x2862),
1783 .driver_info = EM2820_BOARD_UNKNOWN },
1784 { USB_DEVICE(0xeb1a, 0x2863),
1785 .driver_info = EM2820_BOARD_UNKNOWN },
1786 { USB_DEVICE(0xeb1a, 0x2870),
1787 .driver_info = EM2820_BOARD_UNKNOWN },
1788 { USB_DEVICE(0xeb1a, 0x2881),
1789 .driver_info = EM2820_BOARD_UNKNOWN },
1790 { USB_DEVICE(0xeb1a, 0x2883),
1791 .driver_info = EM2820_BOARD_UNKNOWN },
1792 { USB_DEVICE(0xeb1a, 0x2868),
1793 .driver_info = EM2820_BOARD_UNKNOWN },
1794 { USB_DEVICE(0xeb1a, 0x2875),
1795 .driver_info = EM2820_BOARD_UNKNOWN },
1796 { USB_DEVICE(0xeb1a, 0xe300),
1797 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
1798 { USB_DEVICE(0xeb1a, 0xe303),
1799 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 },
1800 { USB_DEVICE(0xeb1a, 0xe305),
1801 .driver_info = EM2880_BOARD_KWORLD_DVB_305U },
1802 { USB_DEVICE(0xeb1a, 0xe310),
1803 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD },
1804 { USB_DEVICE(0xeb1a, 0xa313),
1805 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U },
1806 { USB_DEVICE(0xeb1a, 0xa316),
1807 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U },
1808 { USB_DEVICE(0xeb1a, 0xe320),
1809 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II },
1810 { USB_DEVICE(0xeb1a, 0xe323),
1811 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT },
1812 { USB_DEVICE(0xeb1a, 0xe350),
1813 .driver_info = EM2870_BOARD_KWORLD_350U },
1814 { USB_DEVICE(0xeb1a, 0xe355),
1815 .driver_info = EM2870_BOARD_KWORLD_355U },
1816 { USB_DEVICE(0xeb1a, 0x2801),
1817 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 },
1818 { USB_DEVICE(0xeb1a, 0xe357),
1819 .driver_info = EM2870_BOARD_KWORLD_355U },
1820 { USB_DEVICE(0x1b80, 0xe302),
1821 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */
1822 { USB_DEVICE(0x1b80, 0xe304),
1823 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */
1824 { USB_DEVICE(0x0ccd, 0x0036),
1825 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
1826 { USB_DEVICE(0x0ccd, 0x004c),
1827 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR },
1828 { USB_DEVICE(0x0ccd, 0x004f),
1829 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS },
1830 { USB_DEVICE(0x0ccd, 0x005e),
1831 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1832 { USB_DEVICE(0x0ccd, 0x0042),
1833 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
1834 { USB_DEVICE(0x0ccd, 0x0043),
1835 .driver_info = EM2870_BOARD_TERRATEC_XS },
1836 { USB_DEVICE(0x0ccd, 0x0047),
1837 .driver_info = EM2880_BOARD_TERRATEC_PRODIGY_XS },
1838 { USB_DEVICE(0x0ccd, 0x0084),
1839 .driver_info = EM2860_BOARD_TERRATEC_AV350 },
1840 { USB_DEVICE(0x0ccd, 0x0096),
1841 .driver_info = EM2860_BOARD_TERRATEC_GRABBY },
1842 { USB_DEVICE(0x0fd9, 0x0033),
1843 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE},
1844 { USB_DEVICE(0x185b, 0x2870),
1845 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE },
1846 { USB_DEVICE(0x185b, 0x2041),
1847 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU },
1848 { USB_DEVICE(0x2040, 0x4200),
1849 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1850 { USB_DEVICE(0x2040, 0x4201),
1851 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
1852 { USB_DEVICE(0x2040, 0x6500),
1853 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
1854 { USB_DEVICE(0x2040, 0x6502),
1855 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 },
1856 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
1857 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1858 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
1859 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1860 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
1861 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 },
1862 { USB_DEVICE(0x2040, 0x651f),
1863 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 },
1864 { USB_DEVICE(0x0438, 0xb002),
1865 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 },
1866 { USB_DEVICE(0x2001, 0xf112),
1867 .driver_info = EM2820_BOARD_DLINK_USB_TV },
1868 { USB_DEVICE(0x2304, 0x0207),
1869 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1870 { USB_DEVICE(0x2304, 0x0208),
1871 .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
1872 { USB_DEVICE(0x2304, 0x021a),
1873 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
1874 { USB_DEVICE(0x2304, 0x0226),
1875 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO },
1876 { USB_DEVICE(0x2304, 0x0227),
1877 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO },
1878 { USB_DEVICE(0x0413, 0x6023),
1879 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII },
1880 { USB_DEVICE(0x093b, 0xa005),
1881 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U },
1882 { USB_DEVICE(0x04bb, 0x0515),
1883 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ },
1884 { USB_DEVICE(0xeb1a, 0x50a6),
1885 .driver_info = EM2860_BOARD_GADMEI_UTV330 },
1886 { USB_DEVICE(0x1b80, 0xa340),
1887 .driver_info = EM2870_BOARD_KWORLD_A340 },
1888 { },
1889 };
1890 MODULE_DEVICE_TABLE(usb, em28xx_id_table);
1891
1892 /*
1893 * EEPROM hash table for devices with generic USB IDs
1894 */
1895 static struct em28xx_hash_table em28xx_eeprom_hash[] = {
1896 /* P/N: SA 60002070465 Tuner: TVF7533-MF */
1897 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF},
1898 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF},
1899 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
1900 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
1901 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
1902 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
1903 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT},
1904 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028},
1905 };
1906
1907 /* I2C devicelist hash table for devices with generic USB IDs */
1908 static struct em28xx_hash_table em28xx_i2c_hash[] = {
1909 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC},
1910 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC},
1911 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT},
1912 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
1913 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
1914 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
1915 {0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
1916 };
1917
1918 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
1919 static unsigned short saa711x_addrs[] = {
1920 0x4a >> 1, 0x48 >> 1, /* SAA7111, SAA7111A and SAA7113 */
1921 0x42 >> 1, 0x40 >> 1, /* SAA7114, SAA7115 and SAA7118 */
1922 I2C_CLIENT_END };
1923
1924 static unsigned short tvp5150_addrs[] = {
1925 0xb8 >> 1,
1926 0xba >> 1,
1927 I2C_CLIENT_END
1928 };
1929
1930 static unsigned short msp3400_addrs[] = {
1931 0x80 >> 1,
1932 0x88 >> 1,
1933 I2C_CLIENT_END
1934 };
1935
1936 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
1937 {
1938 int rc = 0;
1939 struct em28xx *dev = ptr;
1940
1941 if (dev->tuner_type != TUNER_XC2028)
1942 return 0;
1943
1944 if (command != XC2028_TUNER_RESET)
1945 return 0;
1946
1947 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio);
1948
1949 return rc;
1950 }
1951 EXPORT_SYMBOL_GPL(em28xx_tuner_callback);
1952
1953 static inline void em28xx_set_model(struct em28xx *dev)
1954 {
1955 memcpy(&dev->board, &em28xx_boards[dev->model], sizeof(dev->board));
1956
1957 /* Those are the default values for the majority of boards
1958 Use those values if not specified otherwise at boards entry
1959 */
1960 if (!dev->board.xclk)
1961 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE |
1962 EM28XX_XCLK_FREQUENCY_12MHZ;
1963
1964 if (!dev->board.i2c_speed)
1965 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
1966 EM28XX_I2C_FREQ_100_KHZ;
1967 }
1968
1969
1970 /* FIXME: Should be replaced by a proper mt9m111 driver */
1971 static int em28xx_initialize_mt9m111(struct em28xx *dev)
1972 {
1973 int i;
1974 unsigned char regs[][3] = {
1975 { 0x0d, 0x00, 0x01, }, /* reset and use defaults */
1976 { 0x0d, 0x00, 0x00, },
1977 { 0x0a, 0x00, 0x21, },
1978 { 0x21, 0x04, 0x00, }, /* full readout speed, no row/col skipping */
1979 };
1980
1981 for (i = 0; i < ARRAY_SIZE(regs); i++)
1982 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
1983
1984 return 0;
1985 }
1986
1987
1988 /* FIXME: Should be replaced by a proper mt9m001 driver */
1989 static int em28xx_initialize_mt9m001(struct em28xx *dev)
1990 {
1991 int i;
1992 unsigned char regs[][3] = {
1993 { 0x0d, 0x00, 0x01, },
1994 { 0x0d, 0x00, 0x00, },
1995 { 0x04, 0x05, 0x00, }, /* hres = 1280 */
1996 { 0x03, 0x04, 0x00, }, /* vres = 1024 */
1997 { 0x20, 0x11, 0x00, },
1998 { 0x06, 0x00, 0x10, },
1999 { 0x2b, 0x00, 0x24, },
2000 { 0x2e, 0x00, 0x24, },
2001 { 0x35, 0x00, 0x24, },
2002 { 0x2d, 0x00, 0x20, },
2003 { 0x2c, 0x00, 0x20, },
2004 { 0x09, 0x0a, 0xd4, },
2005 { 0x35, 0x00, 0x57, },
2006 };
2007
2008 for (i = 0; i < ARRAY_SIZE(regs); i++)
2009 i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
2010
2011 return 0;
2012 }
2013
2014 /* HINT method: webcam I2C chips
2015 *
2016 * This method works for webcams with Micron sensors
2017 */
2018 static int em28xx_hint_sensor(struct em28xx *dev)
2019 {
2020 int rc;
2021 char *sensor_name;
2022 unsigned char cmd;
2023 __be16 version_be;
2024 u16 version;
2025
2026 /* Micron sensor detection */
2027 dev->i2c_client.addr = 0xba >> 1;
2028 cmd = 0;
2029 i2c_master_send(&dev->i2c_client, &cmd, 1);
2030 rc = i2c_master_recv(&dev->i2c_client, (char *)&version_be, 2);
2031 if (rc != 2)
2032 return -EINVAL;
2033
2034 version = be16_to_cpu(version_be);
2035 switch (version) {
2036 case 0x8232: /* mt9v011 640x480 1.3 Mpix sensor */
2037 case 0x8243: /* mt9v011 rev B 640x480 1.3 Mpix sensor */
2038 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
2039 em28xx_set_model(dev);
2040
2041 sensor_name = "mt9v011";
2042 dev->em28xx_sensor = EM28XX_MT9V011;
2043 dev->sensor_xres = 640;
2044 dev->sensor_yres = 480;
2045 /*
2046 * FIXME: mt9v011 uses I2S speed as xtal clk - at least with
2047 * the Silvercrest cam I have here for testing - for higher
2048 * resolutions, a high clock cause horizontal artifacts, so we
2049 * need to use a lower xclk frequency.
2050 * Yet, it would be possible to adjust xclk depending on the
2051 * desired resolution, since this affects directly the
2052 * frame rate.
2053 */
2054 dev->board.xclk = EM28XX_XCLK_FREQUENCY_4_3MHZ;
2055 dev->sensor_xtal = 4300000;
2056
2057 /* probably means GRGB 16 bit bayer */
2058 dev->vinmode = 0x0d;
2059 dev->vinctl = 0x00;
2060
2061 break;
2062
2063 case 0x143a: /* MT9M111 as found in the ECS G200 */
2064 dev->model = EM2750_BOARD_UNKNOWN;
2065 em28xx_set_model(dev);
2066
2067 sensor_name = "mt9m111";
2068 dev->board.xclk = EM28XX_XCLK_FREQUENCY_48MHZ;
2069 dev->em28xx_sensor = EM28XX_MT9M111;
2070 em28xx_initialize_mt9m111(dev);
2071 dev->sensor_xres = 640;
2072 dev->sensor_yres = 512;
2073
2074 dev->vinmode = 0x0a;
2075 dev->vinctl = 0x00;
2076
2077 break;
2078
2079 case 0x8431:
2080 dev->model = EM2750_BOARD_UNKNOWN;
2081 em28xx_set_model(dev);
2082
2083 sensor_name = "mt9m001";
2084 dev->em28xx_sensor = EM28XX_MT9M001;
2085 em28xx_initialize_mt9m001(dev);
2086 dev->sensor_xres = 1280;
2087 dev->sensor_yres = 1024;
2088
2089 /* probably means BGGR 16 bit bayer */
2090 dev->vinmode = 0x0c;
2091 dev->vinctl = 0x00;
2092
2093 break;
2094 default:
2095 printk("Unknown Micron Sensor 0x%04x\n", version);
2096 return -EINVAL;
2097 }
2098
2099 /* Setup webcam defaults */
2100 em28xx_pre_card_setup(dev);
2101
2102 em28xx_errdev("Sensor is %s, using model %s entry.\n",
2103 sensor_name, em28xx_boards[dev->model].name);
2104
2105 return 0;
2106 }
2107
2108 /* Since em28xx_pre_card_setup() requires a proper dev->model,
2109 * this won't work for boards with generic PCI IDs
2110 */
2111 void em28xx_pre_card_setup(struct em28xx *dev)
2112 {
2113 /* Set the initial XCLK and I2C clock values based on the board
2114 definition */
2115 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f);
2116 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2117 msleep(50);
2118
2119 /* request some modules */
2120 switch (dev->model) {
2121 case EM2861_BOARD_PLEXTOR_PX_TV100U:
2122 /* Sets the msp34xx I2S speed */
2123 dev->i2s_speed = 2048000;
2124 break;
2125 case EM2861_BOARD_KWORLD_PVRTV_300U:
2126 case EM2880_BOARD_KWORLD_DVB_305U:
2127 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
2128 msleep(10);
2129 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
2130 msleep(10);
2131 break;
2132 case EM2870_BOARD_COMPRO_VIDEOMATE:
2133 /* TODO: someone can do some cleanup here...
2134 not everything's needed */
2135 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2136 msleep(10);
2137 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
2138 msleep(10);
2139 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2140 mdelay(70);
2141 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2142 mdelay(70);
2143 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xdc);
2144 mdelay(70);
2145 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfc);
2146 mdelay(70);
2147 break;
2148 case EM2870_BOARD_TERRATEC_XS_MT2060:
2149 /* this device needs some gpio writes to get the DVB-T
2150 demod work */
2151 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2152 mdelay(70);
2153 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2154 mdelay(70);
2155 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2156 mdelay(70);
2157 break;
2158 case EM2870_BOARD_PINNACLE_PCTV_DVB:
2159 /* this device needs some gpio writes to get the
2160 DVB-T demod work */
2161 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2162 mdelay(70);
2163 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xde);
2164 mdelay(70);
2165 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2166 mdelay(70);
2167 break;
2168 case EM2820_BOARD_GADMEI_UTV310:
2169 case EM2820_BOARD_MSI_VOX_USB_2:
2170 /* enables audio for that devices */
2171 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2172 break;
2173
2174 case EM2882_BOARD_KWORLD_ATSC_315U:
2175 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2176 msleep(10);
2177 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2178 msleep(10);
2179 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
2180 msleep(10);
2181 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
2182 msleep(10);
2183 break;
2184
2185 case EM2860_BOARD_KAIOMY_TVNPC_U2:
2186 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1);
2187 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
2188 em28xx_write_regs(dev, 0x0d, "\x42", 1);
2189 em28xx_write_regs(dev, 0x08, "\xfd", 1);
2190 msleep(10);
2191 em28xx_write_regs(dev, 0x08, "\xff", 1);
2192 msleep(10);
2193 em28xx_write_regs(dev, 0x08, "\x7f", 1);
2194 msleep(10);
2195 em28xx_write_regs(dev, 0x08, "\x6b", 1);
2196
2197 break;
2198 case EM2860_BOARD_EASYCAP:
2199 em28xx_write_regs(dev, 0x08, "\xf8", 1);
2200 break;
2201
2202 case EM2820_BOARD_IODATA_GVMVP_SZ:
2203 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2204 msleep(70);
2205 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2206 msleep(10);
2207 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
2208 msleep(70);
2209 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2210 msleep(70);
2211 break;
2212 }
2213
2214 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2215 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2216
2217 /* Unlock device */
2218 em28xx_set_mode(dev, EM28XX_SUSPEND);
2219 }
2220
2221 static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
2222 {
2223 memset(ctl, 0, sizeof(*ctl));
2224
2225 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2226 ctl->max_len = 64;
2227 ctl->mts = em28xx_boards[dev->model].mts_firmware;
2228
2229 switch (dev->model) {
2230 case EM2880_BOARD_EMPIRE_DUAL_TV:
2231 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2232 case EM2882_BOARD_TERRATEC_HYBRID_XS:
2233 ctl->demod = XC3028_FE_ZARLINK456;
2234 break;
2235 case EM2880_BOARD_TERRATEC_HYBRID_XS:
2236 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR:
2237 case EM2881_BOARD_PINNACLE_HYBRID_PRO:
2238 ctl->demod = XC3028_FE_ZARLINK456;
2239 break;
2240 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2241 /* djh - Not sure which demod we need here */
2242 ctl->demod = XC3028_FE_DEFAULT;
2243 break;
2244 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
2245 ctl->demod = XC3028_FE_DEFAULT;
2246 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2247 break;
2248 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2249 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2250 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
2251 /* FIXME: Better to specify the needed IF */
2252 ctl->demod = XC3028_FE_DEFAULT;
2253 break;
2254 case EM2883_BOARD_KWORLD_HYBRID_330U:
2255 case EM2882_BOARD_DIKOM_DK300:
2256 case EM2882_BOARD_KWORLD_VS_DVBT:
2257 ctl->demod = XC3028_FE_CHINA;
2258 ctl->fname = XC2028_DEFAULT_FIRMWARE;
2259 break;
2260 case EM2882_BOARD_EVGA_INDTUBE:
2261 ctl->demod = XC3028_FE_CHINA;
2262 ctl->fname = XC3028L_DEFAULT_FIRMWARE;
2263 break;
2264 default:
2265 ctl->demod = XC3028_FE_OREN538;
2266 }
2267 }
2268
2269 static void em28xx_tuner_setup(struct em28xx *dev)
2270 {
2271 struct tuner_setup tun_setup;
2272 struct v4l2_frequency f;
2273
2274 if (dev->tuner_type == TUNER_ABSENT)
2275 return;
2276
2277 memset(&tun_setup, 0, sizeof(tun_setup));
2278
2279 tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
2280 tun_setup.tuner_callback = em28xx_tuner_callback;
2281
2282 if (dev->board.radio.type) {
2283 tun_setup.type = dev->board.radio.type;
2284 tun_setup.addr = dev->board.radio_addr;
2285
2286 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2287 }
2288
2289 if ((dev->tuner_type != TUNER_ABSENT) && (dev->tuner_type)) {
2290 tun_setup.type = dev->tuner_type;
2291 tun_setup.addr = dev->tuner_addr;
2292
2293 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
2294 }
2295
2296 if (dev->tda9887_conf) {
2297 struct v4l2_priv_tun_config tda9887_cfg;
2298
2299 tda9887_cfg.tuner = TUNER_TDA9887;
2300 tda9887_cfg.priv = &dev->tda9887_conf;
2301
2302 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &tda9887_cfg);
2303 }
2304
2305 if (dev->tuner_type == TUNER_XC2028) {
2306 struct v4l2_priv_tun_config xc2028_cfg;
2307 struct xc2028_ctrl ctl;
2308
2309 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
2310 memset(&ctl, 0, sizeof(ctl));
2311
2312 em28xx_setup_xc3028(dev, &ctl);
2313
2314 xc2028_cfg.tuner = TUNER_XC2028;
2315 xc2028_cfg.priv = &ctl;
2316
2317 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, &xc2028_cfg);
2318 }
2319
2320 /* configure tuner */
2321 f.tuner = 0;
2322 f.type = V4L2_TUNER_ANALOG_TV;
2323 f.frequency = 9076; /* just a magic number */
2324 dev->ctl_freq = f.frequency;
2325 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
2326 }
2327
2328 static int em28xx_hint_board(struct em28xx *dev)
2329 {
2330 int i;
2331
2332 /* HINT method: EEPROM
2333 *
2334 * This method works only for boards with eeprom.
2335 * Uses a hash of all eeprom bytes. The hash should be
2336 * unique for a vendor/tuner pair.
2337 * There are a high chance that tuners for different
2338 * video standards produce different hashes.
2339 */
2340 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) {
2341 if (dev->hash == em28xx_eeprom_hash[i].hash) {
2342 dev->model = em28xx_eeprom_hash[i].model;
2343 dev->tuner_type = em28xx_eeprom_hash[i].tuner;
2344
2345 em28xx_errdev("Your board has no unique USB ID.\n");
2346 em28xx_errdev("A hint were successfully done, "
2347 "based on eeprom hash.\n");
2348 em28xx_errdev("This method is not 100%% failproof.\n");
2349 em28xx_errdev("If the board were missdetected, "
2350 "please email this log to:\n");
2351 em28xx_errdev("\tV4L Mailing List "
2352 " <linux-media@vger.kernel.org>\n");
2353 em28xx_errdev("Board detected as %s\n",
2354 em28xx_boards[dev->model].name);
2355
2356 return 0;
2357 }
2358 }
2359
2360 /* HINT method: I2C attached devices
2361 *
2362 * This method works for all boards.
2363 * Uses a hash of i2c scanned devices.
2364 * Devices with the same i2c attached chips will
2365 * be considered equal.
2366 * This method is less precise than the eeprom one.
2367 */
2368
2369 /* user did not request i2c scanning => do it now */
2370 if (!dev->i2c_hash)
2371 em28xx_do_i2c_scan(dev);
2372
2373 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) {
2374 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) {
2375 dev->model = em28xx_i2c_hash[i].model;
2376 dev->tuner_type = em28xx_i2c_hash[i].tuner;
2377 em28xx_errdev("Your board has no unique USB ID.\n");
2378 em28xx_errdev("A hint were successfully done, "
2379 "based on i2c devicelist hash.\n");
2380 em28xx_errdev("This method is not 100%% failproof.\n");
2381 em28xx_errdev("If the board were missdetected, "
2382 "please email this log to:\n");
2383 em28xx_errdev("\tV4L Mailing List "
2384 " <linux-media@vger.kernel.org>\n");
2385 em28xx_errdev("Board detected as %s\n",
2386 em28xx_boards[dev->model].name);
2387
2388 return 0;
2389 }
2390 }
2391
2392 em28xx_errdev("Your board has no unique USB ID and thus need a "
2393 "hint to be detected.\n");
2394 em28xx_errdev("You may try to use card=<n> insmod option to "
2395 "workaround that.\n");
2396 em28xx_errdev("Please send an email with this log to:\n");
2397 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n");
2398 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash);
2399 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash);
2400
2401 em28xx_errdev("Here is a list of valid choices for the card=<n>"
2402 " insmod option:\n");
2403 for (i = 0; i < em28xx_bcount; i++) {
2404 em28xx_errdev(" card=%d -> %s\n",
2405 i, em28xx_boards[i].name);
2406 }
2407 return -1;
2408 }
2409
2410 /* ----------------------------------------------------------------------- */
2411 void em28xx_register_i2c_ir(struct em28xx *dev)
2412 {
2413 /* Leadtek winfast tv USBII deluxe can find a non working IR-device */
2414 /* at address 0x18, so if that address is needed for another board in */
2415 /* the future, please put it after 0x1f. */
2416 struct i2c_board_info info;
2417 const unsigned short addr_list[] = {
2418 0x1f, 0x30, 0x47, I2C_CLIENT_END
2419 };
2420
2421 if (disable_ir)
2422 return;
2423
2424 memset(&info, 0, sizeof(struct i2c_board_info));
2425 memset(&dev->init_data, 0, sizeof(dev->init_data));
2426 strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
2427
2428 /* detect & configure */
2429 switch (dev->model) {
2430 case EM2800_BOARD_TERRATEC_CINERGY_200:
2431 case EM2820_BOARD_TERRATEC_CINERGY_250:
2432 dev->init_data.ir_codes = RC_MAP_EM_TERRATEC;
2433 dev->init_data.get_key = em28xx_get_key_terratec;
2434 dev->init_data.name = "i2c IR (EM28XX Terratec)";
2435 break;
2436 case EM2820_BOARD_PINNACLE_USB_2:
2437 dev->init_data.ir_codes = RC_MAP_PINNACLE_GREY;
2438 dev->init_data.get_key = em28xx_get_key_pinnacle_usb_grey;
2439 dev->init_data.name = "i2c IR (EM28XX Pinnacle PCTV)";
2440 break;
2441 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2442 dev->init_data.ir_codes = RC_MAP_HAUPPAUGE;
2443 dev->init_data.get_key = em28xx_get_key_em_haup;
2444 dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
2445 break;
2446 case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
2447 dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
2448 dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
2449 dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
2450 break;
2451 }
2452
2453 if (dev->init_data.name)
2454 info.platform_data = &dev->init_data;
2455 i2c_new_probed_device(&dev->i2c_adap, &info, addr_list, NULL);
2456 }
2457
2458 void em28xx_card_setup(struct em28xx *dev)
2459 {
2460 /*
2461 * If the device can be a webcam, seek for a sensor.
2462 * If sensor is not found, then it isn't a webcam.
2463 */
2464 if (dev->board.is_webcam) {
2465 if (em28xx_hint_sensor(dev) < 0)
2466 dev->board.is_webcam = 0;
2467 else
2468 dev->progressive = 1;
2469 }
2470
2471 if (!dev->board.is_webcam) {
2472 switch (dev->model) {
2473 case EM2820_BOARD_UNKNOWN:
2474 case EM2800_BOARD_UNKNOWN:
2475 /*
2476 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2477 *
2478 * This occurs because they share identical USB vendor and
2479 * product IDs.
2480 *
2481 * What we do here is look up the EEPROM hash of the K-WORLD
2482 * and if it is found then we decide that we do not have
2483 * a DIGIVOX and reset the device to the K-WORLD instead.
2484 *
2485 * This solution is only valid if they do not share eeprom
2486 * hash identities which has not been determined as yet.
2487 */
2488 if (em28xx_hint_board(dev) < 0)
2489 em28xx_errdev("Board not discovered\n");
2490 else {
2491 em28xx_set_model(dev);
2492 em28xx_pre_card_setup(dev);
2493 }
2494 break;
2495 default:
2496 em28xx_set_model(dev);
2497 }
2498 }
2499
2500 em28xx_info("Identified as %s (card=%d)\n",
2501 dev->board.name, dev->model);
2502
2503 dev->tuner_type = em28xx_boards[dev->model].tuner_type;
2504 if (em28xx_boards[dev->model].tuner_addr)
2505 dev->tuner_addr = em28xx_boards[dev->model].tuner_addr;
2506
2507 if (em28xx_boards[dev->model].tda9887_conf)
2508 dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
2509
2510 /* request some modules */
2511 switch (dev->model) {
2512 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
2513 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
2514 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
2515 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
2516 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
2517 {
2518 struct tveeprom tv;
2519 #if defined(CONFIG_MODULES) && defined(MODULE)
2520 request_module("tveeprom");
2521 #endif
2522 /* Call first TVeeprom */
2523
2524 dev->i2c_client.addr = 0xa0 >> 1;
2525 tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
2526
2527 dev->tuner_type = tv.tuner_type;
2528
2529 if (tv.audio_processor == V4L2_IDENT_MSPX4XX) {
2530 dev->i2s_speed = 2048000;
2531 dev->board.has_msp34xx = 1;
2532 }
2533 break;
2534 }
2535 case EM2882_BOARD_KWORLD_ATSC_315U:
2536 em28xx_write_reg(dev, 0x0d, 0x42);
2537 msleep(10);
2538 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
2539 msleep(10);
2540 break;
2541 case EM2820_BOARD_KWORLD_PVRTV2800RF:
2542 /* GPIO enables sound on KWORLD PVR TV 2800RF */
2543 em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf9);
2544 break;
2545 case EM2820_BOARD_UNKNOWN:
2546 case EM2800_BOARD_UNKNOWN:
2547 /*
2548 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
2549 *
2550 * This occurs because they share identical USB vendor and
2551 * product IDs.
2552 *
2553 * What we do here is look up the EEPROM hash of the K-WORLD
2554 * and if it is found then we decide that we do not have
2555 * a DIGIVOX and reset the device to the K-WORLD instead.
2556 *
2557 * This solution is only valid if they do not share eeprom
2558 * hash identities which has not been determined as yet.
2559 */
2560 case EM2880_BOARD_MSI_DIGIVOX_AD:
2561 if (!em28xx_hint_board(dev))
2562 em28xx_set_model(dev);
2563
2564 /* In cases where we had to use a board hint, the call to
2565 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2566 so make the call now so the analog GPIOs are set properly
2567 before probing the i2c bus. */
2568 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2569 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2570 break;
2571
2572 /*
2573 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR.
2574 *
2575 * This occurs because they share identical USB vendor and
2576 * product IDs.
2577 *
2578 * What we do here is look up the EEPROM hash of the Dikom
2579 * and if it is found then we decide that we do not have
2580 * a Kworld and reset the device to the Dikom instead.
2581 *
2582 * This solution is only valid if they do not share eeprom
2583 * hash identities which has not been determined as yet.
2584 */
2585 case EM2882_BOARD_KWORLD_VS_DVBT:
2586 if (!em28xx_hint_board(dev))
2587 em28xx_set_model(dev);
2588
2589 /* In cases where we had to use a board hint, the call to
2590 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
2591 so make the call now so the analog GPIOs are set properly
2592 before probing the i2c bus. */
2593 em28xx_gpio_set(dev, dev->board.tuner_gpio);
2594 em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
2595 break;
2596 }
2597
2598 #if defined(CONFIG_MODULES) && defined(MODULE)
2599 if (dev->board.has_ir_i2c && !disable_ir)
2600 request_module("ir-kbd-i2c");
2601 #endif
2602 if (dev->board.has_snapshot_button)
2603 em28xx_register_snapshot_button(dev);
2604
2605 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) {
2606 em28xx_errdev("\n\n");
2607 em28xx_errdev("The support for this board weren't "
2608 "valid yet.\n");
2609 em28xx_errdev("Please send a report of having this working\n");
2610 em28xx_errdev("not to V4L mailing list (and/or to other "
2611 "addresses)\n\n");
2612 }
2613
2614 /* Allow override tuner type by a module parameter */
2615 if (tuner >= 0)
2616 dev->tuner_type = tuner;
2617
2618 /* request some modules */
2619 if (dev->board.has_msp34xx)
2620 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2621 "msp3400", 0, msp3400_addrs);
2622
2623 if (dev->board.decoder == EM28XX_SAA711X)
2624 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2625 "saa7115_auto", 0, saa711x_addrs);
2626
2627 if (dev->board.decoder == EM28XX_TVP5150)
2628 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2629 "tvp5150", 0, tvp5150_addrs);
2630
2631 if (dev->em28xx_sensor == EM28XX_MT9V011) {
2632 struct mt9v011_platform_data pdata;
2633 struct i2c_board_info mt9v011_info = {
2634 .type = "mt9v011",
2635 .addr = 0xba >> 1,
2636 .platform_data = &pdata,
2637 };
2638 struct v4l2_subdev *sd;
2639
2640 pdata.xtal = dev->sensor_xtal;
2641 sd = v4l2_i2c_new_subdev_board(&dev->v4l2_dev, &dev->i2c_adap,
2642 &mt9v011_info, NULL);
2643 }
2644
2645
2646 if (dev->board.adecoder == EM28XX_TVAUDIO)
2647 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2648 "tvaudio", dev->board.tvaudio_addr, NULL);
2649
2650 if (dev->board.tuner_type != TUNER_ABSENT) {
2651 int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
2652
2653 if (dev->board.radio.type)
2654 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2655 "tuner", dev->board.radio_addr, NULL);
2656
2657 if (has_demod)
2658 v4l2_i2c_new_subdev(&dev->v4l2_dev,
2659 &dev->i2c_adap, "tuner",
2660 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
2661 if (dev->tuner_addr == 0) {
2662 enum v4l2_i2c_tuner_type type =
2663 has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
2664 struct v4l2_subdev *sd;
2665
2666 sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
2667 &dev->i2c_adap, "tuner",
2668 0, v4l2_i2c_tuner_addrs(type));
2669
2670 if (sd)
2671 dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
2672 } else {
2673 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
2674 "tuner", dev->tuner_addr, NULL);
2675 }
2676 }
2677
2678 em28xx_tuner_setup(dev);
2679
2680 if(!disable_ir)
2681 em28xx_ir_init(dev);
2682 }
2683
2684
2685 #if defined(CONFIG_MODULES) && defined(MODULE)
2686 static void request_module_async(struct work_struct *work)
2687 {
2688 struct em28xx *dev = container_of(work,
2689 struct em28xx, request_module_wk);
2690
2691 if (dev->has_audio_class)
2692 request_module("snd-usb-audio");
2693 else if (dev->has_alsa_audio)
2694 request_module("em28xx-alsa");
2695
2696 if (dev->board.has_dvb)
2697 request_module("em28xx-dvb");
2698 }
2699
2700 static void request_modules(struct em28xx *dev)
2701 {
2702 INIT_WORK(&dev->request_module_wk, request_module_async);
2703 schedule_work(&dev->request_module_wk);
2704 }
2705
2706 static void flush_request_modules(struct em28xx *dev)
2707 {
2708 flush_work_sync(&dev->request_module_wk);
2709 }
2710 #else
2711 #define request_modules(dev)
2712 #define flush_request_modules(dev)
2713 #endif /* CONFIG_MODULES */
2714
2715 /*
2716 * em28xx_realease_resources()
2717 * unregisters the v4l2,i2c and usb devices
2718 * called when the device gets disconected or at module unload
2719 */
2720 void em28xx_release_resources(struct em28xx *dev)
2721 {
2722 if (dev->sbutton_input_dev)
2723 em28xx_deregister_snapshot_button(dev);
2724
2725 if (dev->ir)
2726 em28xx_ir_fini(dev);
2727
2728 /*FIXME: I2C IR should be disconnected */
2729
2730 em28xx_release_analog_resources(dev);
2731
2732 em28xx_remove_from_devlist(dev);
2733
2734 em28xx_i2c_unregister(dev);
2735
2736 v4l2_device_unregister(&dev->v4l2_dev);
2737
2738 usb_put_dev(dev->udev);
2739
2740 /* Mark device as unused */
2741 em28xx_devused &= ~(1 << dev->devno);
2742 };
2743
2744 /*
2745 * em28xx_init_dev()
2746 * allocates and inits the device structs, registers i2c bus and v4l device
2747 */
2748 static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
2749 struct usb_interface *interface,
2750 int minor)
2751 {
2752 struct em28xx *dev = *devhandle;
2753 int retval;
2754 int errCode;
2755
2756 dev->udev = udev;
2757 mutex_init(&dev->ctrl_urb_lock);
2758 spin_lock_init(&dev->slock);
2759 init_waitqueue_head(&dev->open);
2760 init_waitqueue_head(&dev->wait_frame);
2761 init_waitqueue_head(&dev->wait_stream);
2762
2763 dev->em28xx_write_regs = em28xx_write_regs;
2764 dev->em28xx_read_reg = em28xx_read_reg;
2765 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len;
2766 dev->em28xx_write_regs_req = em28xx_write_regs_req;
2767 dev->em28xx_read_reg_req = em28xx_read_reg_req;
2768 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800;
2769
2770 em28xx_set_model(dev);
2771
2772 /* Set the default GPO/GPIO for legacy devices */
2773 dev->reg_gpo_num = EM2880_R04_GPO;
2774 dev->reg_gpio_num = EM28XX_R08_GPIO;
2775
2776 dev->wait_after_write = 5;
2777
2778 /* Based on the Chip ID, set the device configuration */
2779 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
2780 if (retval > 0) {
2781 dev->chip_id = retval;
2782
2783 switch (dev->chip_id) {
2784 case CHIP_ID_EM2800:
2785 em28xx_info("chip ID is em2800\n");
2786 break;
2787 case CHIP_ID_EM2710:
2788 em28xx_info("chip ID is em2710\n");
2789 break;
2790 case CHIP_ID_EM2750:
2791 em28xx_info("chip ID is em2750\n");
2792 break;
2793 case CHIP_ID_EM2820:
2794 em28xx_info("chip ID is em2820 (or em2710)\n");
2795 break;
2796 case CHIP_ID_EM2840:
2797 em28xx_info("chip ID is em2840\n");
2798 break;
2799 case CHIP_ID_EM2860:
2800 em28xx_info("chip ID is em2860\n");
2801 break;
2802 case CHIP_ID_EM2870:
2803 em28xx_info("chip ID is em2870\n");
2804 dev->wait_after_write = 0;
2805 break;
2806 case CHIP_ID_EM2874:
2807 em28xx_info("chip ID is em2874\n");
2808 dev->reg_gpio_num = EM2874_R80_GPIO;
2809 dev->wait_after_write = 0;
2810 break;
2811 case CHIP_ID_EM2883:
2812 em28xx_info("chip ID is em2882/em2883\n");
2813 dev->wait_after_write = 0;
2814 break;
2815 default:
2816 em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
2817 }
2818 }
2819
2820 /* Prepopulate cached GPO register content */
2821 retval = em28xx_read_reg(dev, dev->reg_gpo_num);
2822 if (retval >= 0)
2823 dev->reg_gpo = retval;
2824
2825 em28xx_pre_card_setup(dev);
2826
2827 if (!dev->board.is_em2800) {
2828 /* Resets I2C speed */
2829 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
2830 if (retval < 0) {
2831 em28xx_errdev("%s: em28xx_write_regs_req failed!"
2832 " retval [%d]\n",
2833 __func__, retval);
2834 return retval;
2835 }
2836 }
2837
2838 retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
2839 if (retval < 0) {
2840 em28xx_errdev("Call to v4l2_device_register() failed!\n");
2841 return retval;
2842 }
2843
2844 /* register i2c bus */
2845 errCode = em28xx_i2c_register(dev);
2846 if (errCode < 0) {
2847 v4l2_device_unregister(&dev->v4l2_dev);
2848 em28xx_errdev("%s: em28xx_i2c_register - errCode [%d]!\n",
2849 __func__, errCode);
2850 return errCode;
2851 }
2852
2853 /*
2854 * Default format, used for tvp5150 or saa711x output formats
2855 */
2856 dev->vinmode = 0x10;
2857 dev->vinctl = EM28XX_VINCTRL_INTERLACED |
2858 EM28XX_VINCTRL_CCIR656_ENABLE;
2859
2860 /* Do board specific init and eeprom reading */
2861 em28xx_card_setup(dev);
2862
2863 /* Configure audio */
2864 errCode = em28xx_audio_setup(dev);
2865 if (errCode < 0) {
2866 v4l2_device_unregister(&dev->v4l2_dev);
2867 em28xx_errdev("%s: Error while setting audio - errCode [%d]!\n",
2868 __func__, errCode);
2869 }
2870
2871 /* wake i2c devices */
2872 em28xx_wake_i2c(dev);
2873
2874 /* init video dma queues */
2875 INIT_LIST_HEAD(&dev->vidq.active);
2876 INIT_LIST_HEAD(&dev->vidq.queued);
2877 INIT_LIST_HEAD(&dev->vbiq.active);
2878 INIT_LIST_HEAD(&dev->vbiq.queued);
2879
2880 if (dev->board.has_msp34xx) {
2881 /* Send a reset to other chips via gpio */
2882 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xf7);
2883 if (errCode < 0) {
2884 em28xx_errdev("%s: em28xx_write_regs_req - "
2885 "msp34xx(1) failed! errCode [%d]\n",
2886 __func__, errCode);
2887 return errCode;
2888 }
2889 msleep(3);
2890
2891 errCode = em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xff);
2892 if (errCode < 0) {
2893 em28xx_errdev("%s: em28xx_write_regs_req - "
2894 "msp34xx(2) failed! errCode [%d]\n",
2895 __func__, errCode);
2896 return errCode;
2897 }
2898 msleep(3);
2899 }
2900
2901 em28xx_add_into_devlist(dev);
2902
2903 retval = em28xx_register_analog_devices(dev);
2904 if (retval < 0) {
2905 em28xx_release_resources(dev);
2906 goto fail_reg_devices;
2907 }
2908
2909 em28xx_init_extension(dev);
2910
2911 /* Save some power by putting tuner to sleep */
2912 v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_power, 0);
2913
2914 return 0;
2915
2916 fail_reg_devices:
2917 return retval;
2918 }
2919
2920 /*
2921 * em28xx_usb_probe()
2922 * checks for supported devices
2923 */
2924 static int em28xx_usb_probe(struct usb_interface *interface,
2925 const struct usb_device_id *id)
2926 {
2927 const struct usb_endpoint_descriptor *endpoint;
2928 struct usb_device *udev;
2929 struct usb_interface *uif;
2930 struct em28xx *dev = NULL;
2931 int retval;
2932 int i, nr, ifnum, isoc_pipe;
2933 char *speed;
2934 char descr[255] = "";
2935
2936 udev = usb_get_dev(interface_to_usbdev(interface));
2937 ifnum = interface->altsetting[0].desc.bInterfaceNumber;
2938
2939 /* Check to see next free device and mark as used */
2940 nr = find_first_zero_bit(&em28xx_devused, EM28XX_MAXBOARDS);
2941 em28xx_devused |= 1<<nr;
2942
2943 /* Don't register audio interfaces */
2944 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
2945 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): "
2946 "interface %i, class %i\n",
2947 le16_to_cpu(udev->descriptor.idVendor),
2948 le16_to_cpu(udev->descriptor.idProduct),
2949 ifnum,
2950 interface->altsetting[0].desc.bInterfaceClass);
2951
2952 em28xx_devused &= ~(1<<nr);
2953 retval = -ENODEV;
2954 goto err;
2955 }
2956
2957 endpoint = &interface->cur_altsetting->endpoint[0].desc;
2958
2959 /* check if the device has the iso in endpoint at the correct place */
2960 if (usb_endpoint_xfer_isoc(endpoint)
2961 &&
2962 (interface->altsetting[1].endpoint[0].desc.wMaxPacketSize == 940)) {
2963 /* It's a newer em2874/em2875 device */
2964 isoc_pipe = 0;
2965 } else {
2966 int check_interface = 1;
2967 isoc_pipe = 1;
2968 endpoint = &interface->cur_altsetting->endpoint[1].desc;
2969 if (!usb_endpoint_xfer_isoc(endpoint))
2970 check_interface = 0;
2971
2972 if (usb_endpoint_dir_out(endpoint))
2973 check_interface = 0;
2974
2975 if (!check_interface) {
2976 em28xx_err(DRIVER_NAME " video device (%04x:%04x): "
2977 "interface %i, class %i found.\n",
2978 le16_to_cpu(udev->descriptor.idVendor),
2979 le16_to_cpu(udev->descriptor.idProduct),
2980 ifnum,
2981 interface->altsetting[0].desc.bInterfaceClass);
2982
2983 em28xx_err(DRIVER_NAME " This is an anciliary "
2984 "interface not used by the driver\n");
2985
2986 em28xx_devused &= ~(1<<nr);
2987 retval = -ENODEV;
2988 goto err;
2989 }
2990 }
2991
2992 switch (udev->speed) {
2993 case USB_SPEED_LOW:
2994 speed = "1.5";
2995 break;
2996 case USB_SPEED_UNKNOWN:
2997 case USB_SPEED_FULL:
2998 speed = "12";
2999 break;
3000 case USB_SPEED_HIGH:
3001 speed = "480";
3002 break;
3003 default:
3004 speed = "unknown";
3005 }
3006
3007 if (udev->manufacturer)
3008 strlcpy(descr, udev->manufacturer, sizeof(descr));
3009
3010 if (udev->product) {
3011 if (*descr)
3012 strlcat(descr, " ", sizeof(descr));
3013 strlcat(descr, udev->product, sizeof(descr));
3014 }
3015 if (*descr)
3016 strlcat(descr, " ", sizeof(descr));
3017
3018 printk(DRIVER_NAME ": New device %s@ %s Mbps "
3019 "(%04x:%04x, interface %d, class %d)\n",
3020 descr,
3021 speed,
3022 le16_to_cpu(udev->descriptor.idVendor),
3023 le16_to_cpu(udev->descriptor.idProduct),
3024 ifnum,
3025 interface->altsetting->desc.bInterfaceNumber);
3026
3027 /*
3028 * Make sure we have 480 Mbps of bandwidth, otherwise things like
3029 * video stream wouldn't likely work, since 12 Mbps is generally
3030 * not enough even for most Digital TV streams.
3031 */
3032 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
3033 printk(DRIVER_NAME ": Device initialization failed.\n");
3034 printk(DRIVER_NAME ": Device must be connected to a high-speed"
3035 " USB 2.0 port.\n");
3036 em28xx_devused &= ~(1<<nr);
3037 retval = -ENODEV;
3038 goto err;
3039 }
3040
3041 if (nr >= EM28XX_MAXBOARDS) {
3042 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
3043 EM28XX_MAXBOARDS);
3044 em28xx_devused &= ~(1<<nr);
3045 retval = -ENOMEM;
3046 goto err;
3047 }
3048
3049 /* allocate memory for our device state and initialize it */
3050 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3051 if (dev == NULL) {
3052 em28xx_err(DRIVER_NAME ": out of memory!\n");
3053 em28xx_devused &= ~(1<<nr);
3054 retval = -ENOMEM;
3055 goto err;
3056 }
3057
3058 snprintf(dev->name, 29, "em28xx #%d", nr);
3059 dev->devno = nr;
3060 dev->model = id->driver_info;
3061 dev->alt = -1;
3062
3063 /* Checks if audio is provided by some interface */
3064 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
3065 uif = udev->config->interface[i];
3066 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
3067 dev->has_audio_class = 1;
3068 break;
3069 }
3070 }
3071
3072 /* compute alternate max packet sizes */
3073 uif = udev->actconfig->interface[0];
3074
3075 dev->num_alt = uif->num_altsetting;
3076 dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
3077
3078 if (dev->alt_max_pkt_size == NULL) {
3079 em28xx_errdev("out of memory!\n");
3080 em28xx_devused &= ~(1<<nr);
3081 kfree(dev);
3082 retval = -ENOMEM;
3083 goto err;
3084 }
3085
3086 for (i = 0; i < dev->num_alt ; i++) {
3087 u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[isoc_pipe].desc.wMaxPacketSize);
3088 dev->alt_max_pkt_size[i] =
3089 (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
3090 }
3091
3092 if ((card[nr] >= 0) && (card[nr] < em28xx_bcount))
3093 dev->model = card[nr];
3094
3095 /* allocate device struct */
3096 mutex_init(&dev->lock);
3097 mutex_lock(&dev->lock);
3098 retval = em28xx_init_dev(&dev, udev, interface, nr);
3099 if (retval) {
3100 em28xx_devused &= ~(1<<dev->devno);
3101 mutex_unlock(&dev->lock);
3102 kfree(dev);
3103 goto err;
3104 }
3105
3106 /* save our data pointer in this interface device */
3107 usb_set_intfdata(interface, dev);
3108
3109 request_modules(dev);
3110
3111 /* Should be the last thing to do, to avoid newer udev's to
3112 open the device before fully initializing it
3113 */
3114 mutex_unlock(&dev->lock);
3115
3116 return 0;
3117
3118 err:
3119 return retval;
3120 }
3121
3122 /*
3123 * em28xx_usb_disconnect()
3124 * called when the device gets diconencted
3125 * video device will be unregistered on v4l2_close in case it is still open
3126 */
3127 static void em28xx_usb_disconnect(struct usb_interface *interface)
3128 {
3129 struct em28xx *dev;
3130
3131 dev = usb_get_intfdata(interface);
3132 usb_set_intfdata(interface, NULL);
3133
3134 if (!dev)
3135 return;
3136
3137 em28xx_info("disconnecting %s\n", dev->vdev->name);
3138
3139 flush_request_modules(dev);
3140
3141 /* wait until all current v4l2 io is finished then deallocate
3142 resources */
3143 mutex_lock(&dev->lock);
3144
3145 wake_up_interruptible_all(&dev->open);
3146
3147 v4l2_device_disconnect(&dev->v4l2_dev);
3148
3149 if (dev->users) {
3150 em28xx_warn
3151 ("device %s is open! Deregistration and memory "
3152 "deallocation are deferred on close.\n",
3153 video_device_node_name(dev->vdev));
3154
3155 dev->state |= DEV_MISCONFIGURED;
3156 em28xx_uninit_isoc(dev);
3157 dev->state |= DEV_DISCONNECTED;
3158 wake_up_interruptible(&dev->wait_frame);
3159 wake_up_interruptible(&dev->wait_stream);
3160 } else {
3161 dev->state |= DEV_DISCONNECTED;
3162 em28xx_release_resources(dev);
3163 }
3164
3165 em28xx_close_extension(dev);
3166
3167 mutex_unlock(&dev->lock);
3168
3169 if (!dev->users) {
3170 kfree(dev->alt_max_pkt_size);
3171 kfree(dev);
3172 }
3173 }
3174
3175 static struct usb_driver em28xx_usb_driver = {
3176 .name = "em28xx",
3177 .probe = em28xx_usb_probe,
3178 .disconnect = em28xx_usb_disconnect,
3179 .id_table = em28xx_id_table,
3180 };
3181
3182 static int __init em28xx_module_init(void)
3183 {
3184 int result;
3185
3186 /* register this driver with the USB subsystem */
3187 result = usb_register(&em28xx_usb_driver);
3188 if (result)
3189 em28xx_err(DRIVER_NAME
3190 " usb_register failed. Error number %d.\n", result);
3191
3192 printk(KERN_INFO DRIVER_NAME " driver loaded\n");
3193
3194 return result;
3195 }
3196
3197 static void __exit em28xx_module_exit(void)
3198 {
3199 /* deregister this driver with the USB subsystem */
3200 usb_deregister(&em28xx_usb_driver);
3201 }
3202
3203 module_init(em28xx_module_init);
3204 module_exit(em28xx_module_exit);
kernel source for telekom puls (alcatel/mediatek)