drivers/media/rc/Kconfig

   1 menuconfig RC_CORE
   2         tristate "Remote Controller adapters"
   3         depends on INPUT
   4         default INPUT
   5         ---help---
   6           Enable support for Remote Controllers on Linux. This is
   7           needed in order to support several video capture adapters.
   8           Currently, all supported devices use InfraRed.
   9
  10           Enable this option if you have a video capture board even
  11           if you don't need IR, as otherwise, you may not be able to
  12           compile the driver for your adapter.
  13
  14 if RC_CORE
  15
  16 config LIRC
  17         tristate
  18         default y
  19
  20         ---help---
  21            Enable this option to build the Linux Infrared Remote
  22            Control (LIRC) core device interface driver. The LIRC
  23            interface passes raw IR to and from userspace, where the
  24            LIRC daemon handles protocol decoding for IR reception and
  25            encoding for IR transmitting (aka "blasting").
  26
  27 source "drivers/media/rc/keymaps/Kconfig"
  28
  29 config IR_NEC_DECODER
  30         tristate "Enable IR raw decoder for the NEC protocol"
  31         depends on RC_CORE
  32         select BITREVERSE
  33         default y
  34
  35         ---help---
  36            Enable this option if you have IR with NEC protocol, and
  37            if the IR is decoded in software
  38
  39 config IR_RC5_DECODER
  40         tristate "Enable IR raw decoder for the RC-5 protocol"
  41         depends on RC_CORE
  42         select BITREVERSE
  43         default y
  44
  45         ---help---
  46            Enable this option if you have IR with RC-5 protocol, and
  47            if the IR is decoded in software
  48
  49 config IR_RC6_DECODER
  50         tristate "Enable IR raw decoder for the RC6 protocol"
  51         depends on RC_CORE
  52         select BITREVERSE
  53         default y
  54
  55         ---help---
  56            Enable this option if you have an infrared remote control which
  57            uses the RC6 protocol, and you need software decoding support.
  58
  59 config IR_JVC_DECODER
  60         tristate "Enable IR raw decoder for the JVC protocol"
  61         depends on RC_CORE
  62         select BITREVERSE
  63         default y
  64
  65         ---help---
  66            Enable this option if you have an infrared remote control which
  67            uses the JVC protocol, and you need software decoding support.
  68
  69 config IR_SONY_DECODER
  70         tristate "Enable IR raw decoder for the Sony protocol"
  71         depends on RC_CORE
  72         default y
  73
  74         ---help---
  75            Enable this option if you have an infrared remote control which
  76            uses the Sony protocol, and you need software decoding support.
  77
  78 config IR_RC5_SZ_DECODER
  79         tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
  80         depends on RC_CORE
  81         select BITREVERSE
  82         default y
  83
  84         ---help---
  85            Enable this option if you have IR with RC-5 (streamzap) protocol,
  86            and if the IR is decoded in software. (The Streamzap PC Remote
  87            uses an IR protocol that is almost standard RC-5, but not quite,
  88            as it uses an additional bit).
  89
  90 config IR_LIRC_CODEC
  91         tristate "Enable IR to LIRC bridge"
  92         depends on RC_CORE
  93         depends on LIRC
  94         default y
  95
  96         ---help---
  97            Enable this option to pass raw IR to and from userspace via
  98            the LIRC interface.
  99
 100 config IR_ENE
 101         tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 102         depends on PNP
 103         depends on RC_CORE
 104         ---help---
 105            Say Y here to enable support for integrated infrared receiver
 106            /transceiver made by ENE.
 107
 108            You can see if you have it by looking at lspnp output.
 109            Output should include ENE0100 ENE0200 or something similar.
 110
 111            To compile this driver as a module, choose M here: the
 112            module will be called ene_ir.
 113
 114 config IR_IMON
 115         tristate "SoundGraph iMON Receiver and Display"
 116         depends on USB_ARCH_HAS_HCD
 117         depends on RC_CORE
 118         select USB
 119         ---help---
 120            Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
 121            IR Receiver and/or LCD/VFD/VGA display.
 122
 123            To compile this driver as a module, choose M here: the
 124            module will be called imon.
 125
 126 config IR_MCEUSB
 127         tristate "Windows Media Center Ed. eHome Infrared Transceiver"
 128         depends on USB_ARCH_HAS_HCD
 129         depends on RC_CORE
 130         select USB
 131         ---help---
 132            Say Y here if you want to use a Windows Media Center Edition
 133            eHome Infrared Transceiver.
 134
 135            To compile this driver as a module, choose M here: the
 136            module will be called mceusb.
 137
 138 config IR_NUVOTON
 139         tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 140         depends on PNP
 141         depends on RC_CORE
 142         ---help---
 143            Say Y here to enable support for integrated infrared receiver
 144            /transciever made by Nuvoton (formerly Winbond). This chip is
 145            found in the ASRock ION 330HT, as well as assorted Intel
 146            DP55-series motherboards (and of course, possibly others).
 147
 148            To compile this driver as a module, choose M here: the
 149            module will be called nuvoton-cir.
 150
 151 config IR_STREAMZAP
 152         tristate "Streamzap PC Remote IR Receiver"
 153         depends on USB_ARCH_HAS_HCD
 154         depends on RC_CORE
 155         select USB
 156         ---help---
 157            Say Y here if you want to use a Streamzap PC Remote
 158            Infrared Receiver.
 159
 160            To compile this driver as a module, choose M here: the
 161            module will be called streamzap.
 162
 163 config IR_WINBOND_CIR
 164         tristate "Winbond IR remote control"
 165         depends on X86 && PNP
 166         depends on RC_CORE
 167         select NEW_LEDS
 168         select LEDS_CLASS
 169         select LEDS_TRIGGERS
 170         select BITREVERSE
 171         ---help---
 172            Say Y here if you want to use the IR remote functionality found
 173            in some Winbond SuperI/O chips. Currently only the WPCD376I
 174            chip is supported (included in some Intel Media series
 175            motherboards).
 176
 177            To compile this driver as a module, choose M here: the module will
 178            be called winbond_cir.
 179
 180 endif #RC_CORE