drivers/media/radio/Kconfig

   1 #
   2 # Multimedia Video device configuration
   3 #
   4
   5 menuconfig RADIO_ADAPTERS
   6         bool "Radio Adapters"
   7         depends on VIDEO_V4L2
   8         default y
   9         ---help---
  10           Say Y here to enable selecting AM/FM radio adapters.
  11
  12 if RADIO_ADAPTERS && VIDEO_V4L2
  13
  14 config RADIO_CADET
  15         tristate "ADS Cadet AM/FM Tuner"
  16         depends on ISA && VIDEO_V4L2
  17         ---help---
  18           Choose Y here if you have one of these AM/FM radio cards, and then
  19           fill in the port address below.
  20
  21           In order to control your radio card, you will need to use programs
  22           that are compatible with the Video For Linux API.  Information on
  23           this API and pointers to "v4l" programs may be found at
  24           <file:Documentation/video4linux/API.html>.
  25
  26           Further documentation on this driver can be found on the WWW at
  27           <http://linux.blackhawke.net/cadet/>.
  28
  29           To compile this driver as a module, choose M here: the
  30           module will be called radio-cadet.
  31
  32 config RADIO_RTRACK
  33         tristate "AIMSlab RadioTrack (aka RadioReveal) support"
  34         depends on ISA && VIDEO_V4L2
  35         ---help---
  36           Choose Y here if you have one of these FM radio cards, and then fill
  37           in the port address below.
  38
  39           Note that newer AIMSlab RadioTrack cards have a different chipset
  40           and are not supported by this driver.  For these cards, use the
  41           RadioTrack II driver below.
  42
  43           If you have a GemTeks combined (PnP) sound- and radio card you must
  44           use this driver as a module and setup the card with isapnptools.
  45           You must also pass the module a suitable io parameter, 0x248 has
  46           been reported to be used by these cards.
  47
  48           In order to control your radio card, you will need to use programs
  49           that are compatible with the Video For Linux API.  Information on
  50           this API and pointers to "v4l" programs may be found at
  51           <file:Documentation/video4linux/API.html>. More information is
  52           contained in the file
  53           <file:Documentation/video4linux/radiotrack.txt>.
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called radio-aimslab.
  57
  58 config RADIO_RTRACK_PORT
  59         hex "RadioTrack i/o port (0x20f or 0x30f)"
  60         depends on RADIO_RTRACK=y
  61         default "20f"
  62         help
  63           Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
  64           haven't changed the jumper setting on the card.
  65
  66 config RADIO_RTRACK2
  67         tristate "AIMSlab RadioTrack II support"
  68         depends on ISA && VIDEO_V4L2
  69         ---help---
  70           Choose Y here if you have this FM radio card, and then fill in the
  71           port address below.
  72
  73           In order to control your radio card, you will need to use programs
  74           that are compatible with the Video For Linux API.  Information on
  75           this API and pointers to "v4l" programs may be found at
  76           <file:Documentation/video4linux/API.html>.
  77
  78           To compile this driver as a module, choose M here: the
  79           module will be called radio-rtrack2.
  80
  81 config RADIO_RTRACK2_PORT
  82         hex "RadioTrack II i/o port (0x20c or 0x30c)"
  83         depends on RADIO_RTRACK2=y
  84         default "30c"
  85         help
  86           Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
  87           haven't changed the jumper setting on the card.
  88
  89 config RADIO_AZTECH
  90         tristate "Aztech/Packard Bell Radio"
  91         depends on ISA && VIDEO_V4L2
  92         ---help---
  93           Choose Y here if you have one of these FM radio cards, and then fill
  94           in the port address below.
  95
  96           In order to control your radio card, you will need to use programs
  97           that are compatible with the Video For Linux API.  Information on
  98           this API and pointers to "v4l" programs may be found at
  99           <file:Documentation/video4linux/API.html>.
 100
 101           To compile this driver as a module, choose M here: the
 102           module will be called radio-aztech.
 103
 104 config RADIO_AZTECH_PORT
 105         hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
 106         depends on RADIO_AZTECH=y
 107         default "350"
 108         help
 109           Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
 110           haven't changed the setting of jumper JP3 on the card.  Removing the
 111           jumper sets the card to 0x358.
 112
 113 config RADIO_GEMTEK
 114         tristate "GemTek Radio card (or compatible) support"
 115         depends on ISA && VIDEO_V4L2
 116         ---help---
 117           Choose Y here if you have this FM radio card, and then fill in the
 118           I/O port address and settings below. The following cards either have
 119           GemTek Radio tuner or are rebranded GemTek Radio cards:
 120
 121           - Sound Vision 16 Gold with FM Radio
 122           - Typhoon Radio card (some models)
 123           - Hama Radio card
 124
 125           In order to control your radio card, you will need to use programs
 126           that are compatible with the Video For Linux API.  Information on
 127           this API and pointers to "v4l" programs may be found at
 128           <file:Documentation/video4linux/API.html>.
 129
 130           To compile this driver as a module, choose M here: the
 131           module will be called radio-gemtek.
 132
 133 config RADIO_GEMTEK_PORT
 134         hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
 135         depends on RADIO_GEMTEK=y
 136         default "34c"
 137         help
 138           Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
 139           0x34c, if you haven't changed the jumper setting on the card. On
 140           Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
 141           port is 0x20c, 0x248 or 0x28c.
 142           If automatic I/O port probing is enabled this port will be used only
 143           in case of automatic probing failure, ie. as a fallback.
 144
 145 config RADIO_GEMTEK_PROBE
 146         bool "Automatic I/O port probing"
 147         depends on RADIO_GEMTEK=y
 148         default y
 149         help
 150           Say Y here to enable automatic probing for GemTek Radio card. The
 151           following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
 152           0x28c.
 153
 154 config RADIO_MAXIRADIO
 155         tristate "Guillemot MAXI Radio FM 2000 radio"
 156         depends on VIDEO_V4L2 && PCI
 157         ---help---
 158           Choose Y here if you have this radio card.  This card may also be
 159           found as Gemtek PCI FM.
 160
 161           In order to control your radio card, you will need to use programs
 162           that are compatible with the Video For Linux API.  Information on
 163           this API and pointers to "v4l" programs may be found at
 164           <file:Documentation/video4linux/API.html>.
 165
 166           To compile this driver as a module, choose M here: the
 167           module will be called radio-maxiradio.
 168
 169 config RADIO_MAESTRO
 170         tristate "Maestro on board radio"
 171         depends on VIDEO_V4L2 && PCI
 172         ---help---
 173           Say Y here to directly support the on-board radio tuner on the
 174           Maestro 2 or 2E sound card.
 175
 176           In order to control your radio card, you will need to use programs
 177           that are compatible with the Video For Linux API.  Information on
 178           this API and pointers to "v4l" programs may be found at
 179           <file:Documentation/video4linux/API.html>.
 180
 181           To compile this driver as a module, choose M here: the
 182           module will be called radio-maestro.
 183
 184 config RADIO_MIROPCM20
 185         tristate "miroSOUND PCM20 radio"
 186         depends on ISA && VIDEO_V4L2 && SND
 187         select SND_ISA
 188         select SND_MIRO
 189         ---help---
 190           Choose Y here if you have this FM radio card. You also need to enable
 191           the ALSA sound system. This choice automatically selects the ALSA
 192           sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
 193           is required for the radio-miropcm20.
 194
 195           In order to control your radio card, you will need to use programs
 196           that are compatible with the Video For Linux API.  Information on
 197           this API and pointers to "v4l" programs may be found at
 198           <file:Documentation/video4linux/API.html>.
 199
 200           To compile this driver as a module, choose M here: the
 201           module will be called radio-miropcm20.
 202
 203 config RADIO_SF16FMI
 204         tristate "SF16-FMI/SF16-FMP Radio"
 205         depends on ISA && VIDEO_V4L2
 206         ---help---
 207           Choose Y here if you have one of these FM radio cards.
 208
 209           In order to control your radio card, you will need to use programs
 210           that are compatible with the Video For Linux API.  Information on
 211           this API and pointers to "v4l" programs may be found at
 212           <file:Documentation/video4linux/API.html>.
 213
 214           To compile this driver as a module, choose M here: the
 215           module will be called radio-sf16fmi.
 216
 217 config RADIO_SF16FMR2
 218         tristate "SF16FMR2 Radio"
 219         depends on ISA && VIDEO_V4L2
 220         ---help---
 221           Choose Y here if you have one of these FM radio cards.
 222
 223           In order to control your radio card, you will need to use programs
 224           that are compatible with the Video For Linux API.  Information on
 225           this API and pointers to "v4l" programs may be found on the WWW at
 226           <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called radio-sf16fmr2.
 230
 231 config RADIO_TERRATEC
 232         tristate "TerraTec ActiveRadio ISA Standalone"
 233         depends on ISA && VIDEO_V4L2
 234         ---help---
 235           Choose Y here if you have this FM radio card, and then fill in the
 236           port address below. (TODO)
 237
 238           Note: This driver is in its early stages.  Right now volume and
 239           frequency control and muting works at least for me, but
 240           unfortunately I have not found anybody who wants to use this card
 241           with Linux.  So if it is this what YOU are trying to do right now,
 242           PLEASE DROP ME A NOTE!!  Rolf Offermanns <rolf@offermanns.de>.
 243
 244           In order to control your radio card, you will need to use programs
 245           that are compatible with the Video For Linux API.  Information on
 246           this API and pointers to "v4l" programs may be found at
 247           <file:Documentation/video4linux/API.html>.
 248
 249           To compile this driver as a module, choose M here: the
 250           module will be called radio-terratec.
 251
 252 config RADIO_TERRATEC_PORT
 253         hex "Terratec i/o port (normally 0x590)"
 254         depends on RADIO_TERRATEC=y
 255         default "590"
 256         help
 257           Fill in the I/O port of your TerraTec FM radio card. If unsure, go
 258           with the default.
 259
 260 config RADIO_TRUST
 261         tristate "Trust FM radio card"
 262         depends on ISA && VIDEO_V4L2
 263         help
 264           This is a driver for the Trust FM radio cards. Say Y if you have
 265           such a card and want to use it under Linux.
 266
 267           To compile this driver as a module, choose M here: the
 268           module will be called radio-trust.
 269
 270 config RADIO_TRUST_PORT
 271         hex "Trust i/o port (usually 0x350 or 0x358)"
 272         depends on RADIO_TRUST=y
 273         default "350"
 274         help
 275           Enter the I/O port of your Trust FM radio card. If unsure, try the
 276           values "0x350" or "0x358".
 277
 278 config RADIO_TYPHOON
 279         tristate "Typhoon Radio (a.k.a. EcoRadio)"
 280         depends on ISA && VIDEO_V4L2
 281         ---help---
 282           Choose Y here if you have one of these FM radio cards, and then fill
 283           in the port address and the frequency used for muting below.
 284
 285           In order to control your radio card, you will need to use programs
 286           that are compatible with the Video For Linux API.  Information on
 287           this API and pointers to "v4l" programs may be found at
 288           <file:Documentation/video4linux/API.html>.
 289
 290           To compile this driver as a module, choose M here: the
 291           module will be called radio-typhoon.
 292
 293 config RADIO_TYPHOON_PORT
 294         hex "Typhoon I/O port (0x316 or 0x336)"
 295         depends on RADIO_TYPHOON=y
 296         default "316"
 297         help
 298           Enter the I/O port of your Typhoon or EcoRadio radio card.
 299
 300 config RADIO_TYPHOON_MUTEFREQ
 301         int "Typhoon frequency set when muting the device (kHz)"
 302         depends on RADIO_TYPHOON=y
 303         default "87500"
 304         help
 305           Enter the frequency used for muting the radio. The device is never
 306           completely silent. If the volume is just turned down, you can still
 307           hear silent voices and music. For that reason, the frequency of the
 308           radio device is set to the frequency you can enter here whenever
 309           the device is muted. There should be no local radio station at that
 310           frequency.
 311
 312 config RADIO_ZOLTRIX
 313         tristate "Zoltrix Radio"
 314         depends on ISA && VIDEO_V4L2
 315         ---help---
 316           Choose Y here if you have one of these FM radio cards, and then fill
 317           in the port address below.
 318
 319           In order to control your radio card, you will need to use programs
 320           that are compatible with the Video For Linux API.  Information on
 321           this API and pointers to "v4l" programs may be found at
 322           <file:Documentation/video4linux/API.html>.
 323
 324           To compile this driver as a module, choose M here: the
 325           module will be called radio-zoltrix.
 326
 327 config RADIO_ZOLTRIX_PORT
 328         hex "ZOLTRIX I/O port (0x20c or 0x30c)"
 329         depends on RADIO_ZOLTRIX=y
 330         default "20c"
 331         help
 332           Enter the I/O port of your Zoltrix radio card.
 333
 334 config I2C_SI4713
 335         tristate "I2C driver for Silicon Labs Si4713 device"
 336         depends on I2C && VIDEO_V4L2
 337         ---help---
 338           Say Y here if you want support to Si4713 I2C device.
 339           This device driver supports only i2c bus.
 340
 341           To compile this driver as a module, choose M here: the
 342           module will be called si4713.
 343
 344 config RADIO_SI4713
 345         tristate "Silicon Labs Si4713 FM Radio Transmitter support"
 346         depends on I2C && VIDEO_V4L2
 347         select I2C_SI4713
 348         ---help---
 349           Say Y here if you want support to Si4713 FM Radio Transmitter.
 350           This device can transmit audio through FM. It can transmit
 351           RDS and RBDS signals as well. This module is the v4l2 radio
 352           interface for the i2c driver of this device.
 353
 354           To compile this driver as a module, choose M here: the
 355           module will be called radio-si4713.
 356
 357 config USB_DSBR
 358         tristate "D-Link/GemTek USB FM radio support"
 359         depends on USB && VIDEO_V4L2
 360         ---help---
 361           Say Y here if you want to connect this type of radio to your
 362           computer's USB port. Note that the audio is not digital, and
 363           you must connect the line out connector to a sound card or a
 364           set of speakers.
 365
 366           To compile this driver as a module, choose M here: the
 367           module will be called dsbr100.
 368
 369 config RADIO_SI470X
 370         bool "Silicon Labs Si470x FM Radio Receiver support"
 371         depends on VIDEO_V4L2
 372
 373 source "drivers/media/radio/si470x/Kconfig"
 374
 375 config USB_MR800
 376         tristate "AverMedia MR 800 USB FM radio support"
 377         depends on USB && VIDEO_V4L2
 378         ---help---
 379           Say Y here if you want to connect this type of radio to your
 380           computer's USB port. Note that the audio is not digital, and
 381           you must connect the line out connector to a sound card or a
 382           set of speakers.
 383
 384           To compile this driver as a module, choose M here: the
 385           module will be called radio-mr800.
 386
 387 config RADIO_TEA5764
 388         tristate "TEA5764 I2C FM radio support"
 389         depends on I2C && VIDEO_V4L2
 390         ---help---
 391           Say Y here if you want to use the TEA5764 FM chip found in
 392           EZX phones. This FM chip is present in EZX phones from Motorola,
 393           connected to internal pxa I2C bus.
 394
 395           To compile this driver as a module, choose M here: the
 396           module will be called radio-tea5764.
 397
 398 config RADIO_TEA5764_XTAL
 399         bool "TEA5764 crystal reference"
 400         depends on RADIO_TEA5764=y
 401         default y
 402         help
 403           Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
 404           here if TEA5764 reference frequency is connected in FREQIN.
 405
 406 config RADIO_SAA7706H
 407         tristate "SAA7706H Car Radio DSP"
 408         depends on I2C && VIDEO_V4L2
 409         ---help---
 410           Say Y here if you want to use the SAA7706H Car radio Digital
 411           Signal Processor, found for instance on the Russellville development
 412           board. On the russellville the device is connected to internal
 413           timberdale I2C bus.
 414
 415           To compile this driver as a module, choose M here: the
 416           module will be called SAA7706H.
 417
 418 config RADIO_TEF6862
 419         tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
 420         depends on I2C && VIDEO_V4L2
 421         ---help---
 422           Say Y here if you want to use the TEF6862 Car Radio Enhanced
 423           Selectivity Tuner, found for instance on the Russellville development
 424           board. On the russellville the device is connected to internal
 425           timberdale I2C bus.
 426
 427           To compile this driver as a module, choose M here: the
 428           module will be called TEF6862.
 429
 430 config RADIO_TIMBERDALE
 431         tristate "Enable the Timberdale radio driver"
 432         depends on MFD_TIMBERDALE && VIDEO_V4L2
 433         depends on I2C  # for RADIO_SAA7706H
 434         select RADIO_TEF6862
 435         select RADIO_SAA7706H
 436         ---help---
 437           This is a kind of umbrella driver for the Radio Tuner and DSP
 438           found behind the Timberdale FPGA on the Russellville board.
 439           Enabling this driver will automatically select the DSP and tuner.
 440
 441 config RADIO_WL1273
 442         tristate "Texas Instruments WL1273 I2C FM Radio"
 443         depends on I2C && VIDEO_V4L2
 444         select MFD_CORE
 445         select MFD_WL1273_CORE
 446         select FW_LOADER
 447         ---help---
 448           Choose Y here if you have this FM radio chip.
 449
 450           In order to control your radio card, you will need to use programs
 451           that are compatible with the Video For Linux 2 API.  Information on
 452           this API and pointers to "v4l2" programs may be found at
 453           <file:Documentation/video4linux/API.html>.
 454
 455           To compile this driver as a module, choose M here: the
 456           module will be called radio-wl1273.
 457
 458 # TI's ST based wl128x FM radio
 459 source "drivers/media/radio/wl128x/Kconfig"
 460
 461 endif # RADIO_ADAPTERS