drivers/media/radio/Kconfig

   1 #
   2 # Multimedia Video device configuration
   3 #
   4
   5 menuconfig RADIO_ADAPTERS
   6         bool "Radio Adapters"
   7         depends on VIDEO_V4L2
   8         default y
   9         ---help---
  10           Say Y here to enable selecting AM/FM radio adapters.
  11
  12 if RADIO_ADAPTERS && VIDEO_V4L2
  13
  14 config RADIO_CADET
  15         tristate "ADS Cadet AM/FM Tuner"
  16         depends on ISA && VIDEO_V4L2
  17         ---help---
  18           Choose Y here if you have one of these AM/FM radio cards, and then
  19           fill in the port address below.
  20
  21           In order to control your radio card, you will need to use programs
  22           that are compatible with the Video For Linux API.  Information on
  23           this API and pointers to "v4l" programs may be found at
  24           <file:Documentation/video4linux/API.html>.
  25
  26           Further documentation on this driver can be found on the WWW at
  27           <http://linux.blackhawke.net/cadet/>.
  28
  29           To compile this driver as a module, choose M here: the
  30           module will be called radio-cadet.
  31
  32 config RADIO_RTRACK
  33         tristate "AIMSlab RadioTrack (aka RadioReveal) support"
  34         depends on ISA && VIDEO_V4L2
  35         ---help---
  36           Choose Y here if you have one of these FM radio cards, and then fill
  37           in the port address below.
  38
  39           Note that newer AIMSlab RadioTrack cards have a different chipset
  40           and are not supported by this driver.  For these cards, use the
  41           RadioTrack II driver below.
  42
  43           If you have a GemTeks combined (PnP) sound- and radio card you must
  44           use this driver as a module and setup the card with isapnptools.
  45           You must also pass the module a suitable io parameter, 0x248 has
  46           been reported to be used by these cards.
  47
  48           In order to control your radio card, you will need to use programs
  49           that are compatible with the Video For Linux API.  Information on
  50           this API and pointers to "v4l" programs may be found at
  51           <file:Documentation/video4linux/API.html>. More information is
  52           contained in the file
  53           <file:Documentation/video4linux/radiotrack.txt>.
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called radio-aimslab.
  57
  58 config RADIO_RTRACK_PORT
  59         hex "RadioTrack i/o port (0x20f or 0x30f)"
  60         depends on RADIO_RTRACK=y
  61         default "20f"
  62         help
  63           Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
  64           haven't changed the jumper setting on the card.
  65
  66 config RADIO_RTRACK2
  67         tristate "AIMSlab RadioTrack II support"
  68         depends on ISA && VIDEO_V4L2
  69         ---help---
  70           Choose Y here if you have this FM radio card, and then fill in the
  71           port address below.
  72
  73           In order to control your radio card, you will need to use programs
  74           that are compatible with the Video For Linux API.  Information on
  75           this API and pointers to "v4l" programs may be found at
  76           <file:Documentation/video4linux/API.html>.
  77
  78           To compile this driver as a module, choose M here: the
  79           module will be called radio-rtrack2.
  80
  81 config RADIO_RTRACK2_PORT
  82         hex "RadioTrack II i/o port (0x20c or 0x30c)"
  83         depends on RADIO_RTRACK2=y
  84         default "30c"
  85         help
  86           Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
  87           haven't changed the jumper setting on the card.
  88
  89 config RADIO_AZTECH
  90         tristate "Aztech/Packard Bell Radio"
  91         depends on ISA && VIDEO_V4L2
  92         ---help---
  93           Choose Y here if you have one of these FM radio cards, and then fill
  94           in the port address below.
  95
  96           In order to control your radio card, you will need to use programs
  97           that are compatible with the Video For Linux API.  Information on
  98           this API and pointers to "v4l" programs may be found at
  99           <file:Documentation/video4linux/API.html>.
 100
 101           To compile this driver as a module, choose M here: the
 102           module will be called radio-aztech.
 103
 104 config RADIO_AZTECH_PORT
 105         hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
 106         depends on RADIO_AZTECH=y
 107         default "350"
 108         help
 109           Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
 110           haven't changed the setting of jumper JP3 on the card.  Removing the
 111           jumper sets the card to 0x358.
 112
 113 config RADIO_GEMTEK
 114         tristate "GemTek Radio card (or compatible) support"
 115         depends on ISA && VIDEO_V4L2
 116         ---help---
 117           Choose Y here if you have this FM radio card, and then fill in the
 118           I/O port address and settings below. The following cards either have
 119           GemTek Radio tuner or are rebranded GemTek Radio cards:
 120
 121           - Sound Vision 16 Gold with FM Radio
 122           - Typhoon Radio card (some models)
 123           - Hama Radio card
 124
 125           In order to control your radio card, you will need to use programs
 126           that are compatible with the Video For Linux API.  Information on
 127           this API and pointers to "v4l" programs may be found at
 128           <file:Documentation/video4linux/API.html>.
 129
 130           To compile this driver as a module, choose M here: the
 131           module will be called radio-gemtek.
 132
 133 config RADIO_GEMTEK_PORT
 134         hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
 135         depends on RADIO_GEMTEK=y
 136         default "34c"
 137         help
 138           Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
 139           0x34c, if you haven't changed the jumper setting on the card. On
 140           Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
 141           port is 0x20c, 0x248 or 0x28c.
 142           If automatic I/O port probing is enabled this port will be used only
 143           in case of automatic probing failure, ie. as a fallback.
 144
 145 config RADIO_GEMTEK_PROBE
 146         bool "Automatic I/O port probing"
 147         depends on RADIO_GEMTEK=y
 148         default y
 149         help
 150           Say Y here to enable automatic probing for GemTek Radio card. The
 151           following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
 152           0x28c.
 153
 154 config RADIO_GEMTEK_PCI
 155         tristate "GemTek PCI Radio Card support"
 156         depends on VIDEO_V4L2 && PCI
 157         ---help---
 158           Choose Y here if you have this PCI FM radio card.
 159
 160           In order to control your radio card, you will need to use programs
 161           that are compatible with the Video for Linux API.  Information on
 162           this API and pointers to "v4l" programs may be found at
 163           <file:Documentation/video4linux/API.html>.
 164
 165           To compile this driver as a module, choose M here: the
 166           module will be called radio-gemtek-pci.
 167
 168 config RADIO_MAXIRADIO
 169         tristate "Guillemot MAXI Radio FM 2000 radio"
 170         depends on VIDEO_V4L2 && PCI
 171         ---help---
 172           Choose Y here if you have this radio card.  This card may also be
 173           found as Gemtek PCI FM.
 174
 175           In order to control your radio card, you will need to use programs
 176           that are compatible with the Video For Linux API.  Information on
 177           this API and pointers to "v4l" programs may be found at
 178           <file:Documentation/video4linux/API.html>.
 179
 180           To compile this driver as a module, choose M here: the
 181           module will be called radio-maxiradio.
 182
 183 config RADIO_MAESTRO
 184         tristate "Maestro on board radio"
 185         depends on VIDEO_V4L2 && PCI
 186         ---help---
 187           Say Y here to directly support the on-board radio tuner on the
 188           Maestro 2 or 2E sound card.
 189
 190           In order to control your radio card, you will need to use programs
 191           that are compatible with the Video For Linux API.  Information on
 192           this API and pointers to "v4l" programs may be found at
 193           <file:Documentation/video4linux/API.html>.
 194
 195           To compile this driver as a module, choose M here: the
 196           module will be called radio-maestro.
 197
 198 config RADIO_SF16FMI
 199         tristate "SF16FMI Radio"
 200         depends on ISA && VIDEO_V4L2
 201         ---help---
 202           Choose Y here if you have one of these FM radio cards.  If you
 203           compile the driver into the kernel and your card is not PnP one, you
 204           have to add "sf16fm=<io>" to the kernel command line (I/O address is
 205           0x284 or 0x384).
 206
 207           In order to control your radio card, you will need to use programs
 208           that are compatible with the Video For Linux API.  Information on
 209           this API and pointers to "v4l" programs may be found at
 210           <file:Documentation/video4linux/API.html>.
 211
 212           To compile this driver as a module, choose M here: the
 213           module will be called radio-sf16fmi.
 214
 215 config RADIO_SF16FMR2
 216         tristate "SF16FMR2 Radio"
 217         depends on ISA && VIDEO_V4L2
 218         ---help---
 219           Choose Y here if you have one of these FM radio cards.
 220
 221           In order to control your radio card, you will need to use programs
 222           that are compatible with the Video For Linux API.  Information on
 223           this API and pointers to "v4l" programs may be found on the WWW at
 224           <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
 225
 226           To compile this driver as a module, choose M here: the
 227           module will be called radio-sf16fmr2.
 228
 229 config RADIO_TERRATEC
 230         tristate "TerraTec ActiveRadio ISA Standalone"
 231         depends on ISA && VIDEO_V4L2
 232         ---help---
 233           Choose Y here if you have this FM radio card, and then fill in the
 234           port address below. (TODO)
 235
 236           Note: This driver is in its early stages.  Right now volume and
 237           frequency control and muting works at least for me, but
 238           unfortunately I have not found anybody who wants to use this card
 239           with Linux.  So if it is this what YOU are trying to do right now,
 240           PLEASE DROP ME A NOTE!!  Rolf Offermanns <rolf@offermanns.de>.
 241
 242           In order to control your radio card, you will need to use programs
 243           that are compatible with the Video For Linux API.  Information on
 244           this API and pointers to "v4l" programs may be found at
 245           <file:Documentation/video4linux/API.html>.
 246
 247           To compile this driver as a module, choose M here: the
 248           module will be called radio-terratec.
 249
 250 config RADIO_TERRATEC_PORT
 251         hex "Terratec i/o port (normally 0x590)"
 252         depends on RADIO_TERRATEC=y
 253         default "590"
 254         help
 255           Fill in the I/O port of your TerraTec FM radio card. If unsure, go
 256           with the default.
 257
 258 config RADIO_TRUST
 259         tristate "Trust FM radio card"
 260         depends on ISA && VIDEO_V4L2
 261         help
 262           This is a driver for the Trust FM radio cards. Say Y if you have
 263           such a card and want to use it under Linux.
 264
 265           To compile this driver as a module, choose M here: the
 266           module will be called radio-trust.
 267
 268 config RADIO_TRUST_PORT
 269         hex "Trust i/o port (usually 0x350 or 0x358)"
 270         depends on RADIO_TRUST=y
 271         default "350"
 272         help
 273           Enter the I/O port of your Trust FM radio card. If unsure, try the
 274           values "0x350" or "0x358".
 275
 276 config RADIO_TYPHOON
 277         tristate "Typhoon Radio (a.k.a. EcoRadio)"
 278         depends on ISA && VIDEO_V4L2
 279         ---help---
 280           Choose Y here if you have one of these FM radio cards, and then fill
 281           in the port address and the frequency used for muting below.
 282
 283           In order to control your radio card, you will need to use programs
 284           that are compatible with the Video For Linux API.  Information on
 285           this API and pointers to "v4l" programs may be found at
 286           <file:Documentation/video4linux/API.html>.
 287
 288           To compile this driver as a module, choose M here: the
 289           module will be called radio-typhoon.
 290
 291 config RADIO_TYPHOON_PORT
 292         hex "Typhoon I/O port (0x316 or 0x336)"
 293         depends on RADIO_TYPHOON=y
 294         default "316"
 295         help
 296           Enter the I/O port of your Typhoon or EcoRadio radio card.
 297
 298 config RADIO_TYPHOON_MUTEFREQ
 299         int "Typhoon frequency set when muting the device (kHz)"
 300         depends on RADIO_TYPHOON=y
 301         default "87500"
 302         help
 303           Enter the frequency used for muting the radio. The device is never
 304           completely silent. If the volume is just turned down, you can still
 305           hear silent voices and music. For that reason, the frequency of the
 306           radio device is set to the frequency you can enter here whenever
 307           the device is muted. There should be no local radio station at that
 308           frequency.
 309
 310 config RADIO_ZOLTRIX
 311         tristate "Zoltrix Radio"
 312         depends on ISA && VIDEO_V4L2
 313         ---help---
 314           Choose Y here if you have one of these FM radio cards, and then fill
 315           in the port address below.
 316
 317           In order to control your radio card, you will need to use programs
 318           that are compatible with the Video For Linux API.  Information on
 319           this API and pointers to "v4l" programs may be found at
 320           <file:Documentation/video4linux/API.html>.
 321
 322           To compile this driver as a module, choose M here: the
 323           module will be called radio-zoltrix.
 324
 325 config RADIO_ZOLTRIX_PORT
 326         hex "ZOLTRIX I/O port (0x20c or 0x30c)"
 327         depends on RADIO_ZOLTRIX=y
 328         default "20c"
 329         help
 330           Enter the I/O port of your Zoltrix radio card.
 331
 332 config I2C_SI4713
 333         tristate "I2C driver for Silicon Labs Si4713 device"
 334         depends on I2C && VIDEO_V4L2
 335         ---help---
 336           Say Y here if you want support to Si4713 I2C device.
 337           This device driver supports only i2c bus.
 338
 339           To compile this driver as a module, choose M here: the
 340           module will be called si4713.
 341
 342 config RADIO_SI4713
 343         tristate "Silicon Labs Si4713 FM Radio Transmitter support"
 344         depends on I2C && VIDEO_V4L2
 345         select I2C_SI4713
 346         ---help---
 347           Say Y here if you want support to Si4713 FM Radio Transmitter.
 348           This device can transmit audio through FM. It can transmit
 349           RDS and RBDS signals as well. This module is the v4l2 radio
 350           interface for the i2c driver of this device.
 351
 352           To compile this driver as a module, choose M here: the
 353           module will be called radio-si4713.
 354
 355 config USB_DSBR
 356         tristate "D-Link/GemTek USB FM radio support"
 357         depends on USB && VIDEO_V4L2
 358         ---help---
 359           Say Y here if you want to connect this type of radio to your
 360           computer's USB port. Note that the audio is not digital, and
 361           you must connect the line out connector to a sound card or a
 362           set of speakers.
 363
 364           To compile this driver as a module, choose M here: the
 365           module will be called dsbr100.
 366
 367 config RADIO_SI470X
 368         bool "Silicon Labs Si470x FM Radio Receiver support"
 369         depends on VIDEO_V4L2
 370
 371 source "drivers/media/radio/si470x/Kconfig"
 372
 373 config USB_MR800
 374         tristate "AverMedia MR 800 USB FM radio support"
 375         depends on USB && VIDEO_V4L2
 376         ---help---
 377           Say Y here if you want to connect this type of radio to your
 378           computer's USB port. Note that the audio is not digital, and
 379           you must connect the line out connector to a sound card or a
 380           set of speakers.
 381
 382           To compile this driver as a module, choose M here: the
 383           module will be called radio-mr800.
 384
 385 config RADIO_TEA5764
 386         tristate "TEA5764 I2C FM radio support"
 387         depends on I2C && VIDEO_V4L2
 388         ---help---
 389           Say Y here if you want to use the TEA5764 FM chip found in
 390           EZX phones. This FM chip is present in EZX phones from Motorola,
 391           connected to internal pxa I2C bus.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called radio-tea5764.
 395
 396 config RADIO_TEA5764_XTAL
 397         bool "TEA5764 crystal reference"
 398         depends on RADIO_TEA5764=y
 399         default y
 400         help
 401           Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
 402           here if TEA5764 reference frequency is connected in FREQIN.
 403
 404 config RADIO_TEF6862
 405         tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
 406         depends on I2C && VIDEO_V4L2
 407         ---help---
 408           Say Y here if you want to use the TEF6862 Car Radio Enhanced
 409           Selectivity Tuner, found for instance on the Russellville development
 410           board. On the russellville the device is connected to internal
 411           timberdale I2C bus.
 412
 413           To compile this driver as a module, choose M here: the
 414           module will be called TEF6862.
 415
 416 endif # RADIO_ADAPTERS