drivers/media/radio/Kconfig

   1 #
   2 # Multimedia Video device configuration
   3 #
   4
   5 menuconfig RADIO_ADAPTERS
   6         bool "Radio Adapters"
   7         depends on VIDEO_V4L2
   8         default y
   9         ---help---
  10           Say Y here to enable selecting AM/FM radio adapters.
  11
  12 if RADIO_ADAPTERS && VIDEO_V4L2
  13
  14 config RADIO_CADET
  15         tristate "ADS Cadet AM/FM Tuner"
  16         depends on ISA && VIDEO_V4L2
  17         ---help---
  18           Choose Y here if you have one of these AM/FM radio cards, and then
  19           fill in the port address below.
  20
  21           In order to control your radio card, you will need to use programs
  22           that are compatible with the Video For Linux API.  Information on
  23           this API and pointers to "v4l" programs may be found at
  24           <file:Documentation/video4linux/API.html>.
  25
  26           Further documentation on this driver can be found on the WWW at
  27           <http://linux.blackhawke.net/cadet/>.
  28
  29           To compile this driver as a module, choose M here: the
  30           module will be called radio-cadet.
  31
  32 config RADIO_RTRACK
  33         tristate "AIMSlab RadioTrack (aka RadioReveal) support"
  34         depends on ISA && VIDEO_V4L2
  35         ---help---
  36           Choose Y here if you have one of these FM radio cards, and then fill
  37           in the port address below.
  38
  39           Note that newer AIMSlab RadioTrack cards have a different chipset
  40           and are not supported by this driver.  For these cards, use the
  41           RadioTrack II driver below.
  42
  43           If you have a GemTeks combined (PnP) sound- and radio card you must
  44           use this driver as a module and setup the card with isapnptools.
  45           You must also pass the module a suitable io parameter, 0x248 has
  46           been reported to be used by these cards.
  47
  48           In order to control your radio card, you will need to use programs
  49           that are compatible with the Video For Linux API.  Information on
  50           this API and pointers to "v4l" programs may be found at
  51           <file:Documentation/video4linux/API.html>. More information is
  52           contained in the file
  53           <file:Documentation/video4linux/radiotrack.txt>.
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called radio-aimslab.
  57
  58 config RADIO_RTRACK_PORT
  59         hex "RadioTrack i/o port (0x20f or 0x30f)"
  60         depends on RADIO_RTRACK=y
  61         default "20f"
  62         help
  63           Enter either 0x30f or 0x20f here.  The card default is 0x30f, if you
  64           haven't changed the jumper setting on the card.
  65
  66 config RADIO_RTRACK2
  67         tristate "AIMSlab RadioTrack II support"
  68         depends on ISA && VIDEO_V4L2
  69         ---help---
  70           Choose Y here if you have this FM radio card, and then fill in the
  71           port address below.
  72
  73           In order to control your radio card, you will need to use programs
  74           that are compatible with the Video For Linux API.  Information on
  75           this API and pointers to "v4l" programs may be found at
  76           <file:Documentation/video4linux/API.html>.
  77
  78           To compile this driver as a module, choose M here: the
  79           module will be called radio-rtrack2.
  80
  81 config RADIO_RTRACK2_PORT
  82         hex "RadioTrack II i/o port (0x20c or 0x30c)"
  83         depends on RADIO_RTRACK2=y
  84         default "30c"
  85         help
  86           Enter either 0x30c or 0x20c here.  The card default is 0x30c, if you
  87           haven't changed the jumper setting on the card.
  88
  89 config RADIO_AZTECH
  90         tristate "Aztech/Packard Bell Radio"
  91         depends on ISA && VIDEO_V4L2
  92         ---help---
  93           Choose Y here if you have one of these FM radio cards, and then fill
  94           in the port address below.
  95
  96           In order to control your radio card, you will need to use programs
  97           that are compatible with the Video For Linux API.  Information on
  98           this API and pointers to "v4l" programs may be found at
  99           <file:Documentation/video4linux/API.html>.
 100
 101           To compile this driver as a module, choose M here: the
 102           module will be called radio-aztech.
 103
 104 config RADIO_AZTECH_PORT
 105         hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
 106         depends on RADIO_AZTECH=y
 107         default "350"
 108         help
 109           Enter either 0x350 or 0x358 here.  The card default is 0x350, if you
 110           haven't changed the setting of jumper JP3 on the card.  Removing the
 111           jumper sets the card to 0x358.
 112
 113 config RADIO_GEMTEK
 114         tristate "GemTek Radio card (or compatible) support"
 115         depends on ISA && VIDEO_V4L2
 116         ---help---
 117           Choose Y here if you have this FM radio card, and then fill in the
 118           I/O port address and settings below. The following cards either have
 119           GemTek Radio tuner or are rebranded GemTek Radio cards:
 120
 121           - Sound Vision 16 Gold with FM Radio
 122           - Typhoon Radio card (some models)
 123           - Hama Radio card
 124
 125           In order to control your radio card, you will need to use programs
 126           that are compatible with the Video For Linux API.  Information on
 127           this API and pointers to "v4l" programs may be found at
 128           <file:Documentation/video4linux/API.html>.
 129
 130           To compile this driver as a module, choose M here: the
 131           module will be called radio-gemtek.
 132
 133 config RADIO_GEMTEK_PORT
 134         hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)"
 135         depends on RADIO_GEMTEK=y
 136         default "34c"
 137         help
 138           Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
 139           0x34c, if you haven't changed the jumper setting on the card. On
 140           Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
 141           port is 0x20c, 0x248 or 0x28c.
 142           If automatic I/O port probing is enabled this port will be used only
 143           in case of automatic probing failure, ie. as a fallback.
 144
 145 config RADIO_GEMTEK_PROBE
 146         bool "Automatic I/O port probing"
 147         depends on RADIO_GEMTEK=y
 148         default y
 149         help
 150           Say Y here to enable automatic probing for GemTek Radio card. The
 151           following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and
 152           0x28c.
 153
 154 config RADIO_GEMTEK_PCI
 155         tristate "GemTek PCI Radio Card support"
 156         depends on VIDEO_V4L2 && PCI
 157         ---help---
 158           Choose Y here if you have this PCI FM radio card.
 159
 160           In order to control your radio card, you will need to use programs
 161           that are compatible with the Video for Linux API.  Information on
 162           this API and pointers to "v4l" programs may be found at
 163           <file:Documentation/video4linux/API.html>.
 164
 165           To compile this driver as a module, choose M here: the
 166           module will be called radio-gemtek-pci.
 167
 168 config RADIO_MAXIRADIO
 169         tristate "Guillemot MAXI Radio FM 2000 radio"
 170         depends on VIDEO_V4L2 && PCI
 171         ---help---
 172           Choose Y here if you have this radio card.  This card may also be
 173           found as Gemtek PCI FM.
 174
 175           In order to control your radio card, you will need to use programs
 176           that are compatible with the Video For Linux API.  Information on
 177           this API and pointers to "v4l" programs may be found at
 178           <file:Documentation/video4linux/API.html>.
 179
 180           To compile this driver as a module, choose M here: the
 181           module will be called radio-maxiradio.
 182
 183 config RADIO_MAESTRO
 184         tristate "Maestro on board radio"
 185         depends on VIDEO_V4L2 && PCI
 186         ---help---
 187           Say Y here to directly support the on-board radio tuner on the
 188           Maestro 2 or 2E sound card.
 189
 190           In order to control your radio card, you will need to use programs
 191           that are compatible with the Video For Linux API.  Information on
 192           this API and pointers to "v4l" programs may be found at
 193           <file:Documentation/video4linux/API.html>.
 194
 195           To compile this driver as a module, choose M here: the
 196           module will be called radio-maestro.
 197
 198 config RADIO_MIROPCM20
 199         tristate "miroSOUND PCM20 radio"
 200         depends on ISA && VIDEO_V4L2 && SND
 201         select SND_ISA
 202         select SND_MIRO
 203         ---help---
 204           Choose Y here if you have this FM radio card. You also need to enable
 205           the ALSA sound system. This choice automatically selects the ALSA
 206           sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this
 207           is required for the radio-miropcm20.
 208
 209           In order to control your radio card, you will need to use programs
 210           that are compatible with the Video For Linux API.  Information on
 211           this API and pointers to "v4l" programs may be found at
 212           <file:Documentation/video4linux/API.html>.
 213
 214           To compile this driver as a module, choose M here: the
 215           module will be called radio-miropcm20.
 216
 217 config RADIO_SF16FMI
 218         tristate "SF16-FMI/SF16-FMP Radio"
 219         depends on ISA && VIDEO_V4L2
 220         ---help---
 221           Choose Y here if you have one of these FM radio cards.
 222
 223           In order to control your radio card, you will need to use programs
 224           that are compatible with the Video For Linux API.  Information on
 225           this API and pointers to "v4l" programs may be found at
 226           <file:Documentation/video4linux/API.html>.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called radio-sf16fmi.
 230
 231 config RADIO_SF16FMR2
 232         tristate "SF16FMR2 Radio"
 233         depends on ISA && VIDEO_V4L2
 234         ---help---
 235           Choose Y here if you have one of these FM radio cards.
 236
 237           In order to control your radio card, you will need to use programs
 238           that are compatible with the Video For Linux API.  Information on
 239           this API and pointers to "v4l" programs may be found on the WWW at
 240           <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
 241
 242           To compile this driver as a module, choose M here: the
 243           module will be called radio-sf16fmr2.
 244
 245 config RADIO_TERRATEC
 246         tristate "TerraTec ActiveRadio ISA Standalone"
 247         depends on ISA && VIDEO_V4L2
 248         ---help---
 249           Choose Y here if you have this FM radio card, and then fill in the
 250           port address below. (TODO)
 251
 252           Note: This driver is in its early stages.  Right now volume and
 253           frequency control and muting works at least for me, but
 254           unfortunately I have not found anybody who wants to use this card
 255           with Linux.  So if it is this what YOU are trying to do right now,
 256           PLEASE DROP ME A NOTE!!  Rolf Offermanns <rolf@offermanns.de>.
 257
 258           In order to control your radio card, you will need to use programs
 259           that are compatible with the Video For Linux API.  Information on
 260           this API and pointers to "v4l" programs may be found at
 261           <file:Documentation/video4linux/API.html>.
 262
 263           To compile this driver as a module, choose M here: the
 264           module will be called radio-terratec.
 265
 266 config RADIO_TERRATEC_PORT
 267         hex "Terratec i/o port (normally 0x590)"
 268         depends on RADIO_TERRATEC=y
 269         default "590"
 270         help
 271           Fill in the I/O port of your TerraTec FM radio card. If unsure, go
 272           with the default.
 273
 274 config RADIO_TRUST
 275         tristate "Trust FM radio card"
 276         depends on ISA && VIDEO_V4L2
 277         help
 278           This is a driver for the Trust FM radio cards. Say Y if you have
 279           such a card and want to use it under Linux.
 280
 281           To compile this driver as a module, choose M here: the
 282           module will be called radio-trust.
 283
 284 config RADIO_TRUST_PORT
 285         hex "Trust i/o port (usually 0x350 or 0x358)"
 286         depends on RADIO_TRUST=y
 287         default "350"
 288         help
 289           Enter the I/O port of your Trust FM radio card. If unsure, try the
 290           values "0x350" or "0x358".
 291
 292 config RADIO_TYPHOON
 293         tristate "Typhoon Radio (a.k.a. EcoRadio)"
 294         depends on ISA && VIDEO_V4L2
 295         ---help---
 296           Choose Y here if you have one of these FM radio cards, and then fill
 297           in the port address and the frequency used for muting below.
 298
 299           In order to control your radio card, you will need to use programs
 300           that are compatible with the Video For Linux API.  Information on
 301           this API and pointers to "v4l" programs may be found at
 302           <file:Documentation/video4linux/API.html>.
 303
 304           To compile this driver as a module, choose M here: the
 305           module will be called radio-typhoon.
 306
 307 config RADIO_TYPHOON_PORT
 308         hex "Typhoon I/O port (0x316 or 0x336)"
 309         depends on RADIO_TYPHOON=y
 310         default "316"
 311         help
 312           Enter the I/O port of your Typhoon or EcoRadio radio card.
 313
 314 config RADIO_TYPHOON_MUTEFREQ
 315         int "Typhoon frequency set when muting the device (kHz)"
 316         depends on RADIO_TYPHOON=y
 317         default "87500"
 318         help
 319           Enter the frequency used for muting the radio. The device is never
 320           completely silent. If the volume is just turned down, you can still
 321           hear silent voices and music. For that reason, the frequency of the
 322           radio device is set to the frequency you can enter here whenever
 323           the device is muted. There should be no local radio station at that
 324           frequency.
 325
 326 config RADIO_ZOLTRIX
 327         tristate "Zoltrix Radio"
 328         depends on ISA && VIDEO_V4L2
 329         ---help---
 330           Choose Y here if you have one of these FM radio cards, and then fill
 331           in the port address below.
 332
 333           In order to control your radio card, you will need to use programs
 334           that are compatible with the Video For Linux API.  Information on
 335           this API and pointers to "v4l" programs may be found at
 336           <file:Documentation/video4linux/API.html>.
 337
 338           To compile this driver as a module, choose M here: the
 339           module will be called radio-zoltrix.
 340
 341 config RADIO_ZOLTRIX_PORT
 342         hex "ZOLTRIX I/O port (0x20c or 0x30c)"
 343         depends on RADIO_ZOLTRIX=y
 344         default "20c"
 345         help
 346           Enter the I/O port of your Zoltrix radio card.
 347
 348 config I2C_SI4713
 349         tristate "I2C driver for Silicon Labs Si4713 device"
 350         depends on I2C && VIDEO_V4L2
 351         ---help---
 352           Say Y here if you want support to Si4713 I2C device.
 353           This device driver supports only i2c bus.
 354
 355           To compile this driver as a module, choose M here: the
 356           module will be called si4713.
 357
 358 config RADIO_SI4713
 359         tristate "Silicon Labs Si4713 FM Radio Transmitter support"
 360         depends on I2C && VIDEO_V4L2
 361         select I2C_SI4713
 362         ---help---
 363           Say Y here if you want support to Si4713 FM Radio Transmitter.
 364           This device can transmit audio through FM. It can transmit
 365           RDS and RBDS signals as well. This module is the v4l2 radio
 366           interface for the i2c driver of this device.
 367
 368           To compile this driver as a module, choose M here: the
 369           module will be called radio-si4713.
 370
 371 config USB_DSBR
 372         tristate "D-Link/GemTek USB FM radio support"
 373         depends on USB && VIDEO_V4L2
 374         ---help---
 375           Say Y here if you want to connect this type of radio to your
 376           computer's USB port. Note that the audio is not digital, and
 377           you must connect the line out connector to a sound card or a
 378           set of speakers.
 379
 380           To compile this driver as a module, choose M here: the
 381           module will be called dsbr100.
 382
 383 config RADIO_SI470X
 384         bool "Silicon Labs Si470x FM Radio Receiver support"
 385         depends on VIDEO_V4L2
 386
 387 source "drivers/media/radio/si470x/Kconfig"
 388
 389 config USB_MR800
 390         tristate "AverMedia MR 800 USB FM radio support"
 391         depends on USB && VIDEO_V4L2
 392         ---help---
 393           Say Y here if you want to connect this type of radio to your
 394           computer's USB port. Note that the audio is not digital, and
 395           you must connect the line out connector to a sound card or a
 396           set of speakers.
 397
 398           To compile this driver as a module, choose M here: the
 399           module will be called radio-mr800.
 400
 401 config RADIO_TEA5764
 402         tristate "TEA5764 I2C FM radio support"
 403         depends on I2C && VIDEO_V4L2
 404         ---help---
 405           Say Y here if you want to use the TEA5764 FM chip found in
 406           EZX phones. This FM chip is present in EZX phones from Motorola,
 407           connected to internal pxa I2C bus.
 408
 409           To compile this driver as a module, choose M here: the
 410           module will be called radio-tea5764.
 411
 412 config RADIO_TEA5764_XTAL
 413         bool "TEA5764 crystal reference"
 414         depends on RADIO_TEA5764=y
 415         default y
 416         help
 417           Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N
 418           here if TEA5764 reference frequency is connected in FREQIN.
 419
 420 config RADIO_SAA7706H
 421         tristate "SAA7706H Car Radio DSP"
 422         depends on I2C && VIDEO_V4L2
 423         ---help---
 424           Say Y here if you want to use the SAA7706H Car radio Digital
 425           Signal Processor, found for instance on the Russellville development
 426           board. On the russellville the device is connected to internal
 427           timberdale I2C bus.
 428
 429           To compile this driver as a module, choose M here: the
 430           module will be called SAA7706H.
 431
 432 config RADIO_TEF6862
 433         tristate "TEF6862 Car Radio Enhanced Selectivity Tuner"
 434         depends on I2C && VIDEO_V4L2
 435         ---help---
 436           Say Y here if you want to use the TEF6862 Car Radio Enhanced
 437           Selectivity Tuner, found for instance on the Russellville development
 438           board. On the russellville the device is connected to internal
 439           timberdale I2C bus.
 440
 441           To compile this driver as a module, choose M here: the
 442           module will be called TEF6862.
 443
 444 config RADIO_TIMBERDALE
 445         tristate "Enable the Timberdale radio driver"
 446         depends on MFD_TIMBERDALE && VIDEO_V4L2
 447         depends on I2C  # for RADIO_SAA7706H
 448         select RADIO_TEF6862
 449         select RADIO_SAA7706H
 450         ---help---
 451           This is a kind of umbrella driver for the Radio Tuner and DSP
 452           found behind the Timberdale FPGA on the Russellville board.
 453           Enabling this driver will automatically select the DSP and tuner.
 454
 455 config RADIO_WL1273
 456         tristate "Texas Instruments WL1273 I2C FM Radio"
 457         depends on I2C && VIDEO_V4L2
 458         select MFD_WL1273_CORE
 459         select FW_LOADER
 460         ---help---
 461           Choose Y here if you have this FM radio chip.
 462
 463           In order to control your radio card, you will need to use programs
 464           that are compatible with the Video For Linux 2 API.  Information on
 465           this API and pointers to "v4l2" programs may be found at
 466           <file:Documentation/video4linux/API.html>.
 467
 468           To compile this driver as a module, choose M here: the
 469           module will be called radio-wl1273.
 470
 471 endif # RADIO_ADAPTERS