drivers/leds/Kconfig

   1 config LEDS_GPIO_REGISTER
   2         bool
   3         help
   4           This option provides the function gpio_led_register_device.
   5           As this function is used by arch code it must not be compiled as a
   6           module.
   7
   8 menuconfig NEW_LEDS
   9         bool "LED Support"
  10         help
  11           Say Y to enable Linux LED support.  This allows control of supported
  12           LEDs from both userspace and optionally, by kernel events (triggers).
  13
  14           This is not related to standard keyboard LEDs which are controlled
  15           via the input system.
  16
  17 if NEW_LEDS
  18
  19 config LEDS_CLASS
  20         tristate "LED Class Support"
  21         help
  22           This option enables the led sysfs class in /sys/class/leds.  You'll
  23           need this to do anything useful with LEDs.  If unsure, say N.
  24
  25 comment "LED drivers"
  26
  27 config LEDS_88PM860X
  28         tristate "LED Support for Marvell 88PM860x PMIC"
  29         depends on LEDS_CLASS
  30         depends on MFD_88PM860X
  31         help
  32           This option enables support for on-chip LED drivers found on Marvell
  33           Semiconductor 88PM8606 PMIC.
  34
  35 config LEDS_ATMEL_PWM
  36         tristate "LED Support using Atmel PWM outputs"
  37         depends on LEDS_CLASS
  38         depends on ATMEL_PWM
  39         help
  40           This option enables support for LEDs driven using outputs
  41           of the dedicated PWM controller found on newer Atmel SOCs.
  42
  43 config LEDS_LM3530
  44         tristate "LCD Backlight driver for LM3530"
  45         depends on LEDS_CLASS
  46         depends on I2C
  47         help
  48           This option enables support for the LCD backlight using
  49           LM3530 ambient light sensor chip. This ALS chip can be
  50           controlled manually or using PWM input or using ambient
  51           light automatically.
  52
  53 config LEDS_LOCOMO
  54         tristate "LED Support for Locomo device"
  55         depends on LEDS_CLASS
  56         depends on SHARP_LOCOMO
  57         help
  58           This option enables support for the LEDs on Sharp Locomo.
  59           Zaurus models SL-5500 and SL-5600.
  60
  61 config LEDS_MIKROTIK_RB532
  62         tristate "LED Support for Mikrotik Routerboard 532"
  63         depends on LEDS_CLASS
  64         depends on MIKROTIK_RB532
  65         help
  66           This option enables support for the so called "User LED" of
  67           Mikrotik's Routerboard 532.
  68
  69 config LEDS_S3C24XX
  70         tristate "LED Support for Samsung S3C24XX GPIO LEDs"
  71         depends on LEDS_CLASS
  72         depends on ARCH_S3C24XX
  73         help
  74           This option enables support for LEDs connected to GPIO lines
  75           on Samsung S3C24XX series CPUs, such as the S3C2410 and S3C2440.
  76
  77 config LEDS_NET48XX
  78         tristate "LED Support for Soekris net48xx series Error LED"
  79         depends on LEDS_CLASS
  80         depends on SCx200_GPIO
  81         help
  82           This option enables support for the Soekris net4801 and net4826 error
  83           LED.
  84
  85 config LEDS_FSG
  86         tristate "LED Support for the Freecom FSG-3"
  87         depends on LEDS_CLASS
  88         depends on MACH_FSG
  89         help
  90           This option enables support for the LEDs on the Freecom FSG-3.
  91
  92 config LEDS_WRAP
  93         tristate "LED Support for the WRAP series LEDs"
  94         depends on LEDS_CLASS
  95         depends on SCx200_GPIO
  96         help
  97           This option enables support for the PCEngines WRAP programmable LEDs.
  98
  99 config LEDS_COBALT_QUBE
 100         tristate "LED Support for the Cobalt Qube series front LED"
 101         depends on LEDS_CLASS
 102         depends on MIPS_COBALT
 103         help
 104           This option enables support for the front LED on Cobalt Qube series
 105
 106 config LEDS_COBALT_RAQ
 107         bool "LED Support for the Cobalt Raq series"
 108         depends on LEDS_CLASS=y && MIPS_COBALT
 109         select LEDS_TRIGGERS
 110         help
 111           This option enables support for the Cobalt Raq series LEDs.
 112
 113 config LEDS_SUNFIRE
 114         tristate "LED support for SunFire servers."
 115         depends on LEDS_CLASS
 116         depends on SPARC64
 117         select LEDS_TRIGGERS
 118         help
 119           This option enables support for the Left, Middle, and Right
 120           LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
 121
 122 config LEDS_HP6XX
 123         tristate "LED Support for the HP Jornada 6xx"
 124         depends on LEDS_CLASS
 125         depends on SH_HP6XX
 126         help
 127           This option enables LED support for the handheld
 128           HP Jornada 620/660/680/690.
 129
 130 config LEDS_PCA9532
 131         tristate "LED driver for PCA9532 dimmer"
 132         depends on LEDS_CLASS
 133         depends on I2C && INPUT && EXPERIMENTAL
 134         help
 135           This option enables support for NXP pca9532
 136           LED controller. It is generally only useful
 137           as a platform driver
 138
 139 config LEDS_PCA9532_GPIO
 140         bool "Enable GPIO support for PCA9532"
 141         depends on LEDS_PCA9532
 142         depends on GPIOLIB
 143         help
 144           Allow unused pins on PCA9532 to be used as gpio.
 145
 146           To use a pin as gpio pca9532_type in pca9532_platform data needs to
 147           set to PCA9532_TYPE_GPIO.
 148
 149 config LEDS_GPIO
 150         tristate "LED Support for GPIO connected LEDs"
 151         depends on LEDS_CLASS
 152         depends on GENERIC_GPIO
 153         help
 154           This option enables support for the LEDs connected to GPIO
 155           outputs. To be useful the particular board must have LEDs
 156           and they must be connected to the GPIO lines.  The LEDs must be
 157           defined as platform devices and/or OpenFirmware platform devices.
 158           The code to use these bindings can be selected below.
 159
 160 config LEDS_LP3944
 161         tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
 162         depends on LEDS_CLASS
 163         depends on I2C
 164         help
 165           This option enables support for LEDs connected to the National
 166           Semiconductor LP3944 Lighting Management Unit (LMU) also known as
 167           Fun Light Chip.
 168
 169           To compile this driver as a module, choose M here: the
 170           module will be called leds-lp3944.
 171
 172 config LEDS_LP5521
 173         tristate "LED Support for N.S. LP5521 LED driver chip"
 174         depends on LEDS_CLASS && I2C
 175         help
 176           If you say yes here you get support for the National Semiconductor
 177           LP5521 LED driver. It is 3 channel chip with programmable engines.
 178           Driver provides direct control via LED class and interface for
 179           programming the engines.
 180
 181 config LEDS_LP5523
 182         tristate "LED Support for N.S. LP5523 LED driver chip"
 183         depends on LEDS_CLASS && I2C
 184         help
 185           If you say yes here you get support for the National Semiconductor
 186           LP5523 LED driver. It is 9 channel chip with programmable engines.
 187           Driver provides direct control via LED class and interface for
 188           programming the engines.
 189
 190 config LEDS_CLEVO_MAIL
 191         tristate "Mail LED on Clevo notebook"
 192         depends on LEDS_CLASS
 193         depends on X86 && SERIO_I8042 && DMI
 194         help
 195           This driver makes the mail LED accessible from userspace
 196           programs through the leds subsystem. This LED have three
 197           known mode: off, blink at 0.5Hz and blink at 1Hz.
 198
 199           The driver supports two kinds of interface: using ledtrig-timer
 200           or through /sys/class/leds/clevo::mail/brightness. As this LED
 201           cannot change it's brightness it blinks instead. The brightness
 202           value 0 means off, 1..127 means blink at 0.5Hz and 128..255 means
 203           blink at 1Hz.
 204
 205           This module can drive the mail LED for the following notebooks:
 206
 207                 Clevo D400P
 208                 Clevo D410J
 209                 Clevo D410V
 210                 Clevo D400V/D470V (not tested, but might work)
 211                 Clevo M540N
 212                 Clevo M5x0N (not tested, but might work)
 213                 Positivo Mobile (Clevo M5x0V)
 214
 215           If your model is not listed here you can try the "nodetect"
 216           module parameter.
 217
 218           To compile this driver as a module, choose M here: the
 219           module will be called leds-clevo-mail.
 220
 221 config LEDS_PCA955X
 222         tristate "LED Support for PCA955x I2C chips"
 223         depends on LEDS_CLASS
 224         depends on I2C
 225         help
 226           This option enables support for LEDs connected to PCA955x
 227           LED driver chips accessed via the I2C bus.  Supported
 228           devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 229
 230 config LEDS_PCA9633
 231         tristate "LED support for PCA9633 I2C chip"
 232         depends on LEDS_CLASS
 233         depends on I2C
 234         help
 235           This option enables support for LEDs connected to the PCA9633
 236           LED driver chip accessed via the I2C bus.
 237
 238 config LEDS_WM831X_STATUS
 239         tristate "LED support for status LEDs on WM831x PMICs"
 240         depends on LEDS_CLASS
 241         depends on MFD_WM831X
 242         help
 243           This option enables support for the status LEDs of the WM831x
 244           series of PMICs.
 245
 246 config LEDS_WM8350
 247         tristate "LED Support for WM8350 AudioPlus PMIC"
 248         depends on LEDS_CLASS
 249         depends on MFD_WM8350
 250         help
 251           This option enables support for LEDs driven by the Wolfson
 252           Microelectronics WM8350 AudioPlus PMIC.
 253
 254 config LEDS_DA903X
 255         tristate "LED Support for DA9030/DA9034 PMIC"
 256         depends on LEDS_CLASS
 257         depends on PMIC_DA903X
 258         help
 259           This option enables support for on-chip LED drivers found
 260           on Dialog Semiconductor DA9030/DA9034 PMICs.
 261
 262 config LEDS_DAC124S085
 263         tristate "LED Support for DAC124S085 SPI DAC"
 264         depends on LEDS_CLASS
 265         depends on SPI
 266         help
 267           This option enables support for DAC124S085 SPI DAC from NatSemi,
 268           which can be used to control up to four LEDs.
 269
 270 config LEDS_PWM
 271         tristate "PWM driven LED Support"
 272         depends on LEDS_CLASS
 273         depends on HAVE_PWM
 274         help
 275           This option enables support for pwm driven LEDs
 276
 277 config LEDS_REGULATOR
 278         tristate "REGULATOR driven LED support"
 279         depends on LEDS_CLASS
 280         depends on REGULATOR
 281         help
 282           This option enables support for regulator driven LEDs.
 283
 284 config LEDS_BD2802
 285         tristate "LED driver for BD2802 RGB LED"
 286         depends on LEDS_CLASS
 287         depends on I2C
 288         help
 289           This option enables support for BD2802GU RGB LED driver chips
 290           accessed via the I2C bus.
 291
 292 config LEDS_INTEL_SS4200
 293         tristate "LED driver for Intel NAS SS4200 series"
 294         depends on LEDS_CLASS
 295         depends on PCI && DMI
 296         help
 297           This option enables support for the Intel SS4200 series of
 298           Network Attached Storage servers.  You may control the hard
 299           drive or power LEDs on the front panel.  Using this driver
 300           can stop the front LED from blinking after startup.
 301
 302 config LEDS_LT3593
 303         tristate "LED driver for LT3593 controllers"
 304         depends on LEDS_CLASS
 305         depends on GENERIC_GPIO
 306         help
 307           This option enables support for LEDs driven by a Linear Technology
 308           LT3593 controller. This controller uses a special one-wire pulse
 309           coding protocol to set the brightness.
 310
 311 config LEDS_ADP5520
 312         tristate "LED Support for ADP5520/ADP5501 PMIC"
 313         depends on LEDS_CLASS
 314         depends on PMIC_ADP5520
 315         help
 316           This option enables support for on-chip LED drivers found
 317           on Analog Devices ADP5520/ADP5501 PMICs.
 318
 319           To compile this driver as a module, choose M here: the module will
 320           be called leds-adp5520.
 321
 322 config LEDS_DELL_NETBOOKS
 323         tristate "External LED on Dell Business Netbooks"
 324         depends on LEDS_CLASS
 325         depends on X86 && ACPI_WMI
 326         help
 327           This adds support for the Latitude 2100 and similar
 328           notebooks that have an external LED.
 329
 330 config LEDS_MC13783
 331         tristate "LED Support for MC13783 PMIC"
 332         depends on LEDS_CLASS
 333         depends on MFD_MC13783
 334         help
 335           This option enable support for on-chip LED drivers found
 336           on Freescale Semiconductor MC13783 PMIC.
 337
 338 config LEDS_NS2
 339         tristate "LED support for Network Space v2 GPIO LEDs"
 340         depends on LEDS_CLASS
 341         depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || \
 342                    MACH_NETSPACE_MAX_V2 || MACH_D2NET_V2
 343         default y
 344         help
 345           This option enable support for the dual-GPIO LED found on the
 346           Network Space v2 board (and parents). This include Internet Space v2,
 347           Network Space (Max) v2 and d2 Network v2 boards.
 348
 349 config LEDS_NETXBIG
 350         tristate "LED support for Big Network series LEDs"
 351         depends on MACH_NET2BIG_V2 || MACH_NET5BIG_V2
 352         depends on LEDS_CLASS
 353         default y
 354         help
 355           This option enable support for LEDs found on the LaCie 2Big
 356           and 5Big Network v2 boards. The LEDs are wired to a CPLD and are
 357           controlled through a GPIO extension bus.
 358
 359 config LEDS_ASIC3
 360         bool "LED support for the HTC ASIC3"
 361         depends on LEDS_CLASS
 362         depends on MFD_ASIC3
 363         default y
 364         help
 365           This option enables support for the LEDs on the HTC ASIC3. The HTC
 366           ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver
 367           cannot be used. This driver supports hardware blinking with an on+off
 368           period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700.
 369
 370 config LEDS_RENESAS_TPU
 371         bool "LED support for Renesas TPU"
 372         depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO
 373         help
 374           This option enables build of the LED TPU platform driver,
 375           suitable to drive any TPU channel on newer Renesas SoCs.
 376           The driver controls the GPIO pin connected to the LED via
 377           the GPIO framework and expects the LED to be connected to
 378           a pin that can be driven in both GPIO mode and using TPU
 379           pin function. The latter to support brightness control.
 380           Brightness control is supported but hardware blinking is not.
 381
 382 config LEDS_TCA6507
 383         tristate "LED Support for TCA6507 I2C chip"
 384         depends on LEDS_CLASS && I2C
 385         help
 386           This option enables support for LEDs connected to TC6507
 387           LED driver chips accessed via the I2C bus.
 388           Driver support brightness control and hardware-assisted blinking.
 389
 390 config LEDS_MAX8997
 391         tristate "LED support for MAX8997 PMIC"
 392         depends on LEDS_CLASS && MFD_MAX8997
 393         help
 394           This option enables support for on-chip LED drivers on
 395           MAXIM MAX8997 PMIC.
 396
 397 config LEDS_OT200
 398         tristate "LED support for the Bachmann OT200"
 399         depends on LEDS_CLASS && HAS_IOMEM
 400         help
 401           This option enables support for the LEDs on the Bachmann OT200.
 402           Say Y to enable LEDs on the Bachmann OT200.
 403
 404 config LEDS_TRIGGERS
 405         bool "LED Trigger support"
 406         depends on LEDS_CLASS
 407         help
 408           This option enables trigger support for the leds class.
 409           These triggers allow kernel events to drive the LEDs and can
 410           be configured via sysfs. If unsure, say Y.
 411
 412 comment "LED Triggers"
 413
 414 config LEDS_TRIGGER_TIMER
 415         tristate "LED Timer Trigger"
 416         depends on LEDS_TRIGGERS
 417         help
 418           This allows LEDs to be controlled by a programmable timer
 419           via sysfs. Some LED hardware can be programmed to start
 420           blinking the LED without any further software interaction.
 421           For more details read Documentation/leds/leds-class.txt.
 422
 423           If unsure, say Y.
 424
 425 config LEDS_TRIGGER_IDE_DISK
 426         bool "LED IDE Disk Trigger"
 427         depends on IDE_GD_ATA
 428         depends on LEDS_TRIGGERS
 429         help
 430           This allows LEDs to be controlled by IDE disk activity.
 431           If unsure, say Y.
 432
 433 config LEDS_TRIGGER_HEARTBEAT
 434         tristate "LED Heartbeat Trigger"
 435         depends on LEDS_TRIGGERS
 436         help
 437           This allows LEDs to be controlled by a CPU load average.
 438           The flash frequency is a hyperbolic function of the 1-minute
 439           load average.
 440           If unsure, say Y.
 441
 442 config LEDS_TRIGGER_BACKLIGHT
 443         tristate "LED backlight Trigger"
 444         depends on LEDS_TRIGGERS
 445         help
 446           This allows LEDs to be controlled as a backlight device: they
 447           turn off and on when the display is blanked and unblanked.
 448
 449           If unsure, say N.
 450
 451 config LEDS_TRIGGER_GPIO
 452         tristate "LED GPIO Trigger"
 453         depends on LEDS_TRIGGERS
 454         depends on GPIOLIB
 455         help
 456           This allows LEDs to be controlled by gpio events. It's good
 457           when using gpios as switches and triggering the needed LEDs
 458           from there. One use case is n810's keypad LEDs that could
 459           be triggered by this trigger when user slides up to show
 460           keypad.
 461
 462           If unsure, say N.
 463
 464 config LEDS_TRIGGER_DEFAULT_ON
 465         tristate "LED Default ON Trigger"
 466         depends on LEDS_TRIGGERS
 467         help
 468           This allows LEDs to be initialised in the ON state.
 469           If unsure, say Y.
 470
 471 comment "iptables trigger is under Netfilter config (LED target)"
 472         depends on LEDS_TRIGGERS
 473
 474 endif # NEW_LEDS