drivers/isdn/hisax/bkm_a8.c

   1 /* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
   2  *
   3  * low level stuff for Scitel Quadro (4*S0, passive)
   4  *
   5  * Author       Roland Klabunde
   6  * Copyright    by Roland Klabunde   <R.Klabunde@Berkom.de>
   7  *
   8  * This software may be used and distributed according to the terms
   9  * of the GNU General Public License, incorporated herein by reference.
  10  *
  11  */
  12
  13
  14 #include <linux/init.h>
  15 #include "hisax.h"
  16 #include "isac.h"
  17 #include "ipac.h"
  18 #include "hscx.h"
  19 #include "isdnl1.h"
  20 #include <linux/pci.h>
  21 #include "bkm_ax.h"
  22
  23 #ifdef CONFIG_PCI
  24
  25 #define ATTEMPT_PCI_REMAPPING   /* Required for PLX rev 1 */
  26
  27 extern const char *CardType[];
  28
  29 static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
  30
  31 static const char *sct_quadro_subtypes[] =
  32 {
  33         "",
  34         "#1",
  35         "#2",
  36         "#3",
  37         "#4"
  38 };
  39
  40
  41 #define wordout(addr,val) outw(val,addr)
  42 #define wordin(addr) inw(addr)
  43
  44 static inline u_char
  45 readreg(unsigned int ale, unsigned int adr, u_char off)
  46 {
  47         register u_char ret;
  48         wordout(ale, off);
  49         ret = wordin(adr) & 0xFF;
  50         return (ret);
  51 }
  52
  53 static inline void
  54 readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
  55 {
  56         int i;
  57         wordout(ale, off);
  58         for (i = 0; i < size; i++)
  59                 data[i] = wordin(adr) & 0xFF;
  60 }
  61
  62
  63 static inline void
  64 writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
  65 {
  66         wordout(ale, off);
  67         wordout(adr, data);
  68 }
  69
  70 static inline void
  71 writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
  72 {
  73         int i;
  74         wordout(ale, off);
  75         for (i = 0; i < size; i++)
  76                 wordout(adr, data[i]);
  77 }
  78
  79 /* Interface functions */
  80
  81 static u_char
  82 ReadISAC(struct IsdnCardState *cs, u_char offset)
  83 {
  84         return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
  85 }
  86
  87 static void
  88 WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
  89 {
  90         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
  91 }
  92
  93 static void
  94 ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
  95 {
  96         readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
  97 }
  98
  99 static void
 100 WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
 101 {
 102         writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
 103 }
 104
 105
 106 static u_char
 107 ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
 108 {
 109         return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
 110 }
 111
 112 static void
 113 WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
 114 {
 115         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
 116 }
 117
 118 /* Set the specific ipac to active */
 119 static void
 120 set_ipac_active(struct IsdnCardState *cs, u_int active)
 121 {
 122         /* set irq mask */
 123         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
 124                 active ? 0xc0 : 0xff);
 125 }
 126
 127 /*
 128  * fast interrupt HSCX stuff goes here
 129  */
 130
 131 #define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
 132         cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
 133 #define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
 134         cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
 135 #define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
 136         cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
 137 #define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
 138         cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
 139
 140 #include "hscx_irq.c"
 141
 142 static irqreturn_t
 143 bkm_interrupt_ipac(int intno, void *dev_id)
 144 {
 145         struct IsdnCardState *cs = dev_id;
 146         u_char ista, val, icnt = 5;
 147         u_long flags;
 148
 149         spin_lock_irqsave(&cs->lock, flags);
 150         ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
 151         if (!(ista & 0x3f)) { /* not this IPAC */
 152                 spin_unlock_irqrestore(&cs->lock, flags);
 153                 return IRQ_NONE;
 154         }
 155       Start_IPAC:
 156         if (cs->debug & L1_DEB_IPAC)
 157                 debugl1(cs, "IPAC ISTA %02X", ista);
 158         if (ista & 0x0f) {
 159                 val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
 160                 if (ista & 0x01)
 161                         val |= 0x01;
 162                 if (ista & 0x04)
 163                         val |= 0x02;
 164                 if (ista & 0x08)
 165                         val |= 0x04;
 166                 if (val) {
 167                         hscx_int_main(cs, val);
 168                 }
 169         }
 170         if (ista & 0x20) {
 171                 val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
 172                 if (val) {
 173                         isac_interrupt(cs, val);
 174                 }
 175         }
 176         if (ista & 0x10) {
 177                 val = 0x01;
 178                 isac_interrupt(cs, val);
 179         }
 180         ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
 181         if ((ista & 0x3f) && icnt) {
 182                 icnt--;
 183                 goto Start_IPAC;
 184         }
 185         if (!icnt)
 186                 printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
 187                        CardType[cs->typ],
 188                        sct_quadro_subtypes[cs->subtyp]);
 189         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
 190         writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
 191         spin_unlock_irqrestore(&cs->lock, flags);
 192         return IRQ_HANDLED;
 193 }
 194
 195 static void
 196 release_io_sct_quadro(struct IsdnCardState *cs)
 197 {
 198         release_region(cs->hw.ax.base & 0xffffffc0, 128);
 199         if (cs->subtyp == SCT_1)
 200                 release_region(cs->hw.ax.plx_adr, 64);
 201 }
 202
 203 static void
 204 enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
 205 {
 206         if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
 207                 if (bEnable)
 208                         wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
 209                 else
 210                         wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
 211         }
 212 }
 213
 214 static void
 215 reset_bkm(struct IsdnCardState *cs)
 216 {
 217         if (cs->subtyp == SCT_1) {
 218                 wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
 219                 mdelay(10);
 220                 /* Remove the soft reset */
 221                 wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
 222                 mdelay(10);
 223         }
 224 }
 225
 226 static int
 227 BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 228 {
 229         u_long flags;
 230
 231         switch (mt) {
 232                 case CARD_RESET:
 233                         spin_lock_irqsave(&cs->lock, flags);
 234                         /* Disable ints */
 235                         set_ipac_active(cs, 0);
 236                         enable_bkm_int(cs, 0);
 237                         reset_bkm(cs);
 238                         spin_unlock_irqrestore(&cs->lock, flags);
 239                         return (0);
 240                 case CARD_RELEASE:
 241                         /* Sanity */
 242                         spin_lock_irqsave(&cs->lock, flags);
 243                         set_ipac_active(cs, 0);
 244                         enable_bkm_int(cs, 0);
 245                         spin_unlock_irqrestore(&cs->lock, flags);
 246                         release_io_sct_quadro(cs);
 247                         return (0);
 248                 case CARD_INIT:
 249                         spin_lock_irqsave(&cs->lock, flags);
 250                         cs->debug |= L1_DEB_IPAC;
 251                         set_ipac_active(cs, 1);
 252                         inithscxisac(cs, 3);
 253                         /* Enable ints */
 254                         enable_bkm_int(cs, 1);
 255                         spin_unlock_irqrestore(&cs->lock, flags);
 256                         return (0);
 257                 case CARD_TEST:
 258                         return (0);
 259         }
 260         return (0);
 261 }
 262
 263 static int __devinit
 264 sct_alloc_io(u_int adr, u_int len)
 265 {
 266         if (!request_region(adr, len, "scitel")) {
 267                 printk(KERN_WARNING
 268                         "HiSax: Scitel port %#x-%#x already in use\n",
 269                         adr, adr + len);
 270                 return (1);
 271         }
 272         return(0);
 273 }
 274
 275 static struct pci_dev *dev_a8 __devinitdata = NULL;
 276 static u16  sub_vendor_id __devinitdata = 0;
 277 static u16  sub_sys_id __devinitdata = 0;
 278 static u_char pci_bus __devinitdata = 0;
 279 static u_char pci_device_fn __devinitdata = 0;
 280 static u_char pci_irq __devinitdata = 0;
 281
 282 #endif /* CONFIG_PCI */
 283
 284 int __devinit
 285 setup_sct_quadro(struct IsdnCard *card)
 286 {
 287 #ifdef CONFIG_PCI
 288         struct IsdnCardState *cs = card->cs;
 289         char tmp[64];
 290         u_int found = 0;
 291         u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
 292
 293         strcpy(tmp, sct_quadro_revision);
 294         printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
 295         if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
 296                 cs->subtyp = SCT_1;     /* Preset */
 297         } else
 298                 return (0);
 299
 300         /* Identify subtype by para[0] */
 301         if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
 302                 cs->subtyp = card->para[0];
 303         else {
 304                 printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
 305                         CardType[card->typ]);
 306                 return (0);
 307         }
 308         if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
 309                 (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
 310                 return (0);
 311         if (cs->subtyp == SCT_1) {
 312                 while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
 313                         PCI_DEVICE_ID_PLX_9050, dev_a8))) {
 314
 315                         sub_vendor_id = dev_a8->subsystem_vendor;
 316                         sub_sys_id = dev_a8->subsystem_device;
 317                         if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
 318                                 (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
 319                                 if (pci_enable_device(dev_a8))
 320                                         return(0);
 321                                 pci_ioaddr1 = pci_resource_start(dev_a8, 1);
 322                                 pci_irq = dev_a8->irq;
 323                                 pci_bus = dev_a8->bus->number;
 324                                 pci_device_fn = dev_a8->devfn;
 325                                 found = 1;
 326                                 break;
 327                         }
 328                 }
 329                 if (!found) {
 330                         printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
 331                                 CardType[card->typ],
 332                                 sct_quadro_subtypes[cs->subtyp]);
 333                         return (0);
 334                 }
 335 #ifdef ATTEMPT_PCI_REMAPPING
 336 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
 337                 if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
 338                         printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
 339                                 CardType[card->typ],
 340                                 sct_quadro_subtypes[cs->subtyp]);
 341                         /* Restart PCI negotiation */
 342                         pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
 343                         /* Move up by 0x80 byte */
 344                         pci_ioaddr1 += 0x80;
 345                         pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 346                         pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
 347                         dev_a8->resource[ 1].start = pci_ioaddr1;
 348                 }
 349 #endif /* End HACK */
 350         }
 351         if (!pci_irq) {         /* IRQ range check ?? */
 352                 printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
 353                        CardType[card->typ],
 354                        sct_quadro_subtypes[cs->subtyp]);
 355                 return (0);
 356         }
 357         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
 358         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
 359         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
 360         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
 361         pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
 362         if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
 363                 printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
 364                        CardType[card->typ],
 365                        sct_quadro_subtypes[cs->subtyp]);
 366                 return (0);
 367         }
 368         pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 369         pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
 370         pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
 371         pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
 372         pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
 373         /* Take over */
 374         cs->irq = pci_irq;
 375         cs->irq_flags |= IRQF_SHARED;
 376         /* pci_ioaddr1 is unique to all subdevices */
 377         /* pci_ioaddr2 is for the fourth subdevice only */
 378         /* pci_ioaddr3 is for the third subdevice only */
 379         /* pci_ioaddr4 is for the second subdevice only */
 380         /* pci_ioaddr5 is for the first subdevice only */
 381         cs->hw.ax.plx_adr = pci_ioaddr1;
 382         /* Enter all ipac_base addresses */
 383         switch(cs->subtyp) {
 384                 case 1:
 385                         cs->hw.ax.base = pci_ioaddr5 + 0x00;
 386                         if (sct_alloc_io(pci_ioaddr1, 128))
 387                                 return(0);
 388                         if (sct_alloc_io(pci_ioaddr5, 64))
 389                                 return(0);
 390                         /* disable all IPAC */
 391                         writereg(pci_ioaddr5, pci_ioaddr5 + 4,
 392                                 IPAC_MASK, 0xFF);
 393                         writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
 394                                 IPAC_MASK, 0xFF);
 395                         writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
 396                                 IPAC_MASK, 0xFF);
 397                         writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
 398                                 IPAC_MASK, 0xFF);
 399                         break;
 400                 case 2:
 401                         cs->hw.ax.base = pci_ioaddr4 + 0x08;
 402                         if (sct_alloc_io(pci_ioaddr4, 64))
 403                                 return(0);
 404                         break;
 405                 case 3:
 406                         cs->hw.ax.base = pci_ioaddr3 + 0x10;
 407                         if (sct_alloc_io(pci_ioaddr3, 64))
 408                                 return(0);
 409                         break;
 410                 case 4:
 411                         cs->hw.ax.base = pci_ioaddr2 + 0x20;
 412                         if (sct_alloc_io(pci_ioaddr2, 64))
 413                                 return(0);
 414                         break;
 415         }
 416         /* For isac and hscx data path */
 417         cs->hw.ax.data_adr = cs->hw.ax.base + 4;
 418
 419         printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
 420                CardType[card->typ],
 421                sct_quadro_subtypes[cs->subtyp],
 422                cs->hw.ax.plx_adr,
 423                cs->hw.ax.base,
 424                cs->hw.ax.data_adr,
 425                cs->irq);
 426
 427         test_and_set_bit(HW_IPAC, &cs->HW_Flags);
 428
 429         cs->readisac = &ReadISAC;
 430         cs->writeisac = &WriteISAC;
 431         cs->readisacfifo = &ReadISACfifo;
 432         cs->writeisacfifo = &WriteISACfifo;
 433
 434         cs->BC_Read_Reg = &ReadHSCX;
 435         cs->BC_Write_Reg = &WriteHSCX;
 436         cs->BC_Send_Data = &hscx_fill_fifo;
 437         cs->cardmsg = &BKM_card_msg;
 438         cs->irq_func = &bkm_interrupt_ipac;
 439
 440         printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
 441                 CardType[card->typ],
 442                 sct_quadro_subtypes[cs->subtyp],
 443                 readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
 444         return (1);
 445 #else
 446         printk(KERN_ERR "HiSax: bkm_a8 only supported on PCI Systems\n");
 447 #endif /* CONFIG_PCI */
 448 }