2 # Touchscreen driver configuration
4 menuconfig INPUT_TOUCHSCREEN
7 Say Y here, and a list of supported touchscreens will be displayed.
8 This option doesn't affect the kernel.
14 config TOUCHSCREEN_88PM860X
15 tristate "Marvell 88PM860x touchscreen"
16 depends on MFD_88PM860X
18 Say Y here if you have a 88PM860x PMIC and want to enable
19 support for the built-in touchscreen.
23 To compile this driver as a module, choose M here: the
24 module will be called 88pm860x-ts.
26 config TOUCHSCREEN_ADS7846
27 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
29 depends on HWMON = n || HWMON
31 Say Y here if you have a touchscreen interface using the
32 ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
33 and your board-specific setup code includes that in its
36 If HWMON is selected, and the driver is told the reference voltage
37 on your board, you will also get hwmon interfaces for the voltage
38 (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
40 If unsure, say N (but it's safe to say "Y").
42 To compile this driver as a module, choose M here: the
43 module will be called ads7846.
45 config TOUCHSCREEN_AD7877
46 tristate "AD7877 based touchscreens"
49 Say Y here if you have a touchscreen interface using the
50 AD7877 controller, and your board-specific initialization
51 code includes that in its table of SPI devices.
53 If unsure, say N (but it's safe to say "Y").
55 To compile this driver as a module, choose M here: the
56 module will be called ad7877.
58 config TOUCHSCREEN_AD7879
59 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
61 Say Y here if you want to support a touchscreen interface using
62 the AD7879-1/AD7889-1 controller.
64 You should select a bus connection too.
66 To compile this driver as a module, choose M here: the
67 module will be called ad7879.
69 config TOUCHSCREEN_AD7879_I2C
70 tristate "support I2C bus connection"
71 depends on TOUCHSCREEN_AD7879 && I2C
73 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
75 To compile this driver as a module, choose M here: the
76 module will be called ad7879-i2c.
78 config TOUCHSCREEN_AD7879_SPI
79 tristate "support SPI bus connection"
80 depends on TOUCHSCREEN_AD7879 && SPI_MASTER
82 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
84 If unsure, say N (but it's safe to say "Y").
86 To compile this driver as a module, choose M here: the
87 module will be called ad7879-spi.
89 config TOUCHSCREEN_ATMEL_MXT
90 tristate "Atmel mXT I2C Touchscreen"
93 Say Y here if you have Atmel mXT series I2C touchscreen,
94 such as AT42QT602240/ATMXT224, connected to your system.
98 To compile this driver as a module, choose M here: the
99 module will be called atmel_mxt_ts.
101 config TOUCHSCREEN_AUO_PIXCIR
102 tristate "AUO in-cell touchscreen using Pixcir ICs"
106 Say Y here if you have a AUO display with in-cell touchscreen
111 To compile this driver as a module, choose M here: the
112 module will be called auo-pixcir-ts.
114 config TOUCHSCREEN_BU21013
115 tristate "BU21013 based touch panel controllers"
118 Say Y here if you have a bu21013 touchscreen connected to
123 To compile this driver as a module, choose M here: the
124 module will be called bu21013_ts.
126 config TOUCHSCREEN_CY8CTMG110
127 tristate "cy8ctmg110 touchscreen"
131 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
136 To compile this driver as a module, choose M here: the
137 module will be called cy8ctmg110_ts.
139 config TOUCHSCREEN_CYTTSP_CORE
140 tristate "Cypress TTSP touchscreen"
142 Say Y here if you have a touchscreen using controller from
143 the Cypress TrueTouch(tm) Standard Product family connected
144 to your system. You will also need to select appropriate
145 bus connection below.
149 To compile this driver as a module, choose M here: the
150 module will be called cyttsp_core.
152 config TOUCHSCREEN_CYTTSP_I2C
153 tristate "support I2C bus connection"
154 depends on TOUCHSCREEN_CYTTSP_CORE && I2C
156 Say Y here if the touchscreen is connected via I2C bus.
158 To compile this driver as a module, choose M here: the
159 module will be called cyttsp_i2c.
161 config TOUCHSCREEN_CYTTSP_SPI
162 tristate "support SPI bus connection"
163 depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
165 Say Y here if the touchscreen is connected via SPI bus.
167 To compile this driver as a module, choose M here: the
168 module will be called cyttsp_spi.
170 config TOUCHSCREEN_DA9034
171 tristate "Touchscreen support for Dialog Semiconductor DA9034"
172 depends on PMIC_DA903X
175 Say Y here to enable the support for the touchscreen found
176 on Dialog Semiconductor DA9034 PMIC.
180 To compile this driver as a module, choose M here: the
181 module will be called da9034-ts.
183 config TOUCHSCREEN_DA9052
184 tristate "Dialog DA9052/DA9053 TSI"
185 depends on PMIC_DA9052
187 Say Y here to support the touchscreen found on Dialog Semiconductor
188 DA9052-BC and DA9053-AA/Bx PMICs.
192 To compile this driver as a module, choose M here: the
193 module will be called da9052_tsi.
195 config TOUCHSCREEN_DYNAPRO
196 tristate "Dynapro serial touchscreen"
199 Say Y here if you have a Dynapro serial touchscreen connected to
204 To compile this driver as a module, choose M here: the
205 module will be called dynapro.
207 config TOUCHSCREEN_HAMPSHIRE
208 tristate "Hampshire serial touchscreen"
211 Say Y here if you have a Hampshire serial touchscreen connected to
216 To compile this driver as a module, choose M here: the
217 module will be called hampshire.
219 config TOUCHSCREEN_EETI
220 tristate "EETI touchscreen panel support"
223 Say Y here to enable support for I2C connected EETI touch panels.
225 To compile this driver as a module, choose M here: the
226 module will be called eeti_ts.
228 config TOUCHSCREEN_EGALAX
229 tristate "EETI eGalax multi-touch panel support"
232 Say Y here to enable support for I2C connected EETI
233 eGalax multi-touch panels.
235 To compile this driver as a module, choose M here: the
236 module will be called egalax_ts.
238 config TOUCHSCREEN_FUJITSU
239 tristate "Fujitsu serial touchscreen"
242 Say Y here if you have the Fujitsu touchscreen (such as one
243 installed in Lifebook P series laptop) connected to your
248 To compile this driver as a module, choose M here: the
249 module will be called fujitsu-ts.
251 config TOUCHSCREEN_ILI210X
252 tristate "Ilitek ILI210X based touchscreen"
255 Say Y here if you have a ILI210X based touchscreen
256 controller. This driver supports models ILI2102,
257 ILI2102s, ILI2103, ILI2103s and ILI2105.
258 Such kind of chipsets can be found in Amazon Kindle Fire
263 To compile this driver as a module, choose M here: the
264 module will be called ili210x.
266 config TOUCHSCREEN_S3C2410
267 tristate "Samsung S3C2410/generic touchscreen input driver"
268 depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
271 Say Y here if you have the s3c2410 touchscreen.
275 To compile this driver as a module, choose M here: the
276 module will be called s3c2410_ts.
278 config TOUCHSCREEN_GUNZE
279 tristate "Gunze AHL-51S touchscreen"
282 Say Y here if you have the Gunze AHL-51 touchscreen connected to
287 To compile this driver as a module, choose M here: the
288 module will be called gunze.
290 config TOUCHSCREEN_ELO
291 tristate "Elo serial touchscreens"
294 Say Y here if you have an Elo serial touchscreen connected to
299 To compile this driver as a module, choose M here: the
300 module will be called elo.
302 config TOUCHSCREEN_WACOM_W8001
303 tristate "Wacom W8001 penabled serial touchscreen"
306 Say Y here if you have an Wacom W8001 penabled serial touchscreen
307 connected to your system.
311 To compile this driver as a module, choose M here: the
312 module will be called wacom_w8001.
314 config TOUCHSCREEN_WACOM_I2C
315 tristate "Wacom Tablet support (I2C)"
318 Say Y here if you want to use the I2C version of the Wacom
323 To compile this driver as a module, choose M here: the module
324 will be called wacom_i2c.
326 config TOUCHSCREEN_LPC32XX
327 tristate "LPC32XX touchscreen controller"
328 depends on ARCH_LPC32XX
330 Say Y here if you have a LPC32XX device and want
331 to support the built-in touchscreen.
333 To compile this driver as a module, choose M here: the
334 module will be called lpc32xx_ts.
336 config TOUCHSCREEN_MAX11801
337 tristate "MAX11801 based touchscreens"
340 Say Y here if you have a MAX11801 based touchscreen
345 To compile this driver as a module, choose M here: the
346 module will be called max11801_ts.
348 config TOUCHSCREEN_MCS5000
349 tristate "MELFAS MCS-5000 touchscreen"
352 Say Y here if you have the MELFAS MCS-5000 touchscreen controller
357 To compile this driver as a module, choose M here: the
358 module will be called mcs5000_ts.
360 config TOUCHSCREEN_MMS114
361 tristate "MELFAS MMS114 touchscreen"
362 depends on I2C && GENERIC_HARDIRQS
364 Say Y here if you have the MELFAS MMS114 touchscreen controller
369 To compile this driver as a module, choose M here: the
370 module will be called mms114.
372 config TOUCHSCREEN_MTOUCH
373 tristate "MicroTouch serial touchscreens"
376 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
381 To compile this driver as a module, choose M here: the
382 module will be called mtouch.
384 config TOUCHSCREEN_INEXIO
385 tristate "iNexio serial touchscreens"
388 Say Y here if you have an iNexio serial touchscreen connected to
393 To compile this driver as a module, choose M here: the
394 module will be called inexio.
396 config TOUCHSCREEN_INTEL_MID
397 tristate "Intel MID platform resistive touchscreen"
398 depends on INTEL_SCU_IPC
400 Say Y here if you have a Intel MID based touchscreen in
405 To compile this driver as a module, choose M here: the
406 module will be called intel_mid_touch.
408 config TOUCHSCREEN_MK712
409 tristate "ICS MicroClock MK712 touchscreen"
411 Say Y here if you have the ICS MicroClock MK712 touchscreen
412 controller chip in your system.
416 To compile this driver as a module, choose M here: the
417 module will be called mk712.
419 config TOUCHSCREEN_MTK
420 bool "MediaTek Touch Panel Driver"
422 Say Y here if you have MediaTek touch panel.
424 config TOUCHSCREEN_MTK_GT9XX
425 bool "GT9XX for Mediatek package"
426 depends on TOUCHSCREEN_MTK
428 config TOUCHSCREEN_MTK_GT9XX_HOTKNOT_SCP
429 bool "GT9XX with SCP for Mediatek package"
430 depends on TOUCHSCREEN_MTK
432 config TOUCHSCREEN_MTK_GT9XX_HOTKNOT
433 bool "GT9XX HOTKNOT for Mediatek package"
434 depends on TOUCHSCREEN_MTK
436 config TOUCHSCREEN_MTK_MAX1187X
437 bool "MAX1187X for Mediatek package"
438 depends on TOUCHSCREEN_MTK
441 config TOUCHSCREEN_MTK_GT9XXTB_HOTKNOT
442 bool "GT9XXTB HOTKNOT for Mediatek package"
443 depends on TOUCHSCREEN_MTK
445 config TOUCHSCREEN_MTK_GT818B_FPGA
446 bool "GT818B for Mediatek package"
449 config TOUCHSCREEN_S7020
450 bool "GT9XX for Mediatek package"
451 depends on TOUCHSCREEN_MTK
453 config TOUCHSCREEN_MTK_GT9XX_2
454 bool "GT9XX for Mediatek package"
455 depends on TOUCHSCREEN_MTK
459 bool "GT9XX for Mediatek package"
462 bool "GT911 for Mediatek package"
466 bool "MMS244 for Mediatek package"
469 config GT9XX_HOTKNOT_FLASHLESS
470 bool "GT9XX_HOTKNOT for Mediatek package"
474 bool "FT5406 for Mediatek package"
478 bool "FT5406_82 for Mediatek package"
482 bool "FT5206 for Mediatek package"
486 bool "MMS134 for Mediatek package"
490 bool "MMS128 for Mediatek package"
498 bool "MIT200 for Mediatek package"
501 config TOUCHSCREEN_HP600
502 tristate "HP Jornada 6xx touchscreen"
503 depends on SH_HP6XX && SH_ADC
505 Say Y here if you have a HP Jornada 620/660/680/690 and want to
506 support the built-in touchscreen.
508 To compile this driver as a module, choose M here: the
509 module will be called hp680_ts_input.
511 config TOUCHSCREEN_HP7XX
512 tristate "HP Jornada 7xx touchscreen"
513 depends on SA1100_JORNADA720_SSP
515 Say Y here if you have a HP Jornada 710/720/728 and want
516 to support the built-in touchscreen.
518 To compile this driver as a module, choose M here: the
519 module will be called jornada720_ts.
521 config TOUCHSCREEN_HTCPEN
522 tristate "HTC Shift X9500 touchscreen"
525 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
526 Clio / Shangrila and want to support the built-in touchscreen.
530 To compile this driver as a module, choose M here: the
531 module will be called htcpen.
533 config TOUCHSCREEN_PENMOUNT
534 tristate "Penmount serial touchscreen"
537 Say Y here if you have a Penmount serial touchscreen connected to
542 To compile this driver as a module, choose M here: the
543 module will be called penmount.
545 config TOUCHSCREEN_EDT_FT5X06
546 tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
549 Say Y here if you have an EDT "Polytouch" touchscreen based
550 on the FocalTech FT5x06 family of controllers connected to
555 To compile this driver as a module, choose M here: the
556 module will be called edt-ft5x06.
558 config TOUCHSCREEN_MIGOR
559 tristate "Renesas MIGO-R touchscreen"
560 depends on SH_MIGOR && I2C
562 Say Y here to enable MIGO-R touchscreen support.
566 To compile this driver as a module, choose M here: the
567 module will be called migor_ts.
569 config TOUCHSCREEN_TNETV107X
570 tristate "TI TNETV107X touchscreen support"
571 depends on ARCH_DAVINCI_TNETV107X
573 Say Y here if you want to use the TNETV107X touchscreen.
575 To compile this driver as a module, choose M here: the
576 module will be called tnetv107x-ts.
578 config TOUCHSCREEN_TOUCHRIGHT
579 tristate "Touchright serial touchscreen"
582 Say Y here if you have a Touchright serial touchscreen connected to
587 To compile this driver as a module, choose M here: the
588 module will be called touchright.
590 config TOUCHSCREEN_TOUCHWIN
591 tristate "Touchwin serial touchscreen"
594 Say Y here if you have a Touchwin serial touchscreen connected to
599 To compile this driver as a module, choose M here: the
600 module will be called touchwin.
602 config TOUCHSCREEN_TI_AM335X_TSC
603 tristate "TI Touchscreen Interface"
604 depends on MFD_TI_AM335X_TSCADC
606 Say Y here if you have 4/5/8 wire touchscreen controller
607 to be connected to the ADC controller on your TI AM335x SoC.
611 To compile this driver as a module, choose M here: the
612 module will be called ti_am335x_tsc.
614 config TOUCHSCREEN_ATMEL_TSADCC
615 tristate "Atmel Touchscreen Interface"
618 Say Y here if you have a 4-wire touchscreen connected to the
619 ADC Controller on your Atmel SoC.
623 To compile this driver as a module, choose M here: the
624 module will be called atmel_tsadcc.
626 config TOUCHSCREEN_UCB1400
627 tristate "Philips UCB1400 touchscreen"
629 depends on UCB1400_CORE
631 This enables support for the Philips UCB1400 touchscreen interface.
632 The UCB1400 is an AC97 audio codec. The touchscreen interface
633 will be initialized only after the ALSA subsystem has been
634 brought up and the UCB1400 detected. You therefore have to
635 configure ALSA support as well (either built-in or modular,
636 independently of whether this driver is itself built-in or
637 modular) for this driver to work.
639 To compile this driver as a module, choose M here: the
640 module will be called ucb1400_ts.
642 config TOUCHSCREEN_PIXCIR
643 tristate "PIXCIR I2C touchscreens"
646 Say Y here if you have a pixcir i2c touchscreen
651 To compile this driver as a module, choose M here: the
652 module will be called pixcir_i2c_ts.
654 config TOUCHSCREEN_WM831X
655 tristate "Support for WM831x touchscreen controllers"
656 depends on MFD_WM831X
658 This enables support for the touchscreen controller on the WM831x
661 To compile this driver as a module, choose M here: the
662 module will be called wm831x-ts.
664 config TOUCHSCREEN_WM97XX
665 tristate "Support for WM97xx AC97 touchscreen controllers"
668 Say Y here if you have a Wolfson Microelectronics WM97xx
669 touchscreen connected to your system. Note that this option
670 only enables core driver, you will also need to select
671 support for appropriate chip below.
675 To compile this driver as a module, choose M here: the
676 module will be called wm97xx-ts.
678 config TOUCHSCREEN_WM9705
679 bool "WM9705 Touchscreen interface support"
680 depends on TOUCHSCREEN_WM97XX
683 Say Y here to enable support for the Wolfson Microelectronics
684 WM9705 touchscreen controller.
686 config TOUCHSCREEN_WM9712
687 bool "WM9712 Touchscreen interface support"
688 depends on TOUCHSCREEN_WM97XX
691 Say Y here to enable support for the Wolfson Microelectronics
692 WM9712 touchscreen controller.
694 config TOUCHSCREEN_WM9713
695 bool "WM9713 Touchscreen interface support"
696 depends on TOUCHSCREEN_WM97XX
699 Say Y here to enable support for the Wolfson Microelectronics
700 WM9713 touchscreen controller.
702 config TOUCHSCREEN_MTK_FTS2A052
703 bool "FTS2A052 for Mediatek package"
706 config TOUCHSCREEN_WM97XX_ATMEL
707 tristate "WM97xx Atmel accelerated touch"
708 depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
710 Say Y here for support for streaming mode with WM97xx touchscreens
711 on Atmel AT91 or AVR32 systems with an AC97C module.
713 Be aware that this will use channel B in the controller for
714 streaming data, this must not conflict with other AC97C drivers.
718 To compile this driver as a module, choose M here: the module will
719 be called atmel-wm97xx.
721 config TOUCHSCREEN_WM97XX_MAINSTONE
722 tristate "WM97xx Mainstone/Palm accelerated touch"
723 depends on TOUCHSCREEN_WM97XX && ARCH_PXA
725 Say Y here for support for streaming mode with WM97xx touchscreens
726 on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
730 To compile this driver as a module, choose M here: the
731 module will be called mainstone-wm97xx.
733 config TOUCHSCREEN_WM97XX_ZYLONITE
734 tristate "Zylonite accelerated touch"
735 depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
736 select TOUCHSCREEN_WM9713
738 Say Y here for support for streaming mode with the touchscreen
743 To compile this driver as a module, choose M here: the
744 module will be called zylonite-wm97xx.
746 config TOUCHSCREEN_USB_COMPOSITE
747 tristate "USB Touchscreen Driver"
748 depends on USB_ARCH_HAS_HCD
751 USB Touchscreen driver for:
752 - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
753 - PanJit TouchSet USB
754 - 3M MicroTouch USB (EX II series)
756 - some other eTurboTouch
759 - IRTOUCHSYSTEMS/UNITOP
761 - GoTop Super_Q2/GogoPen/PenPower tablets
762 - JASTEC USB Touch Controller/DigiTech DTR-02U
763 - Zytronic controllers
764 - Elo TouchSystems 2700 IntelliTouch
765 - EasyTouch USB Touch Controller from Data Modul
766 - e2i (Mimo monitors)
768 Have a look at <http://linux.chapter7.ch/touchkit/> for
769 a usage description and the required user-space stuff.
771 To compile this driver as a module, choose M here: the
772 module will be called usbtouchscreen.
774 config TOUCHSCREEN_MC13783
775 tristate "Freescale MC13783 touchscreen input driver"
776 depends on MFD_MC13783
778 Say Y here if you have an Freescale MC13783 PMIC on your
779 board and want to use its touchscreen
783 To compile this driver as a module, choose M here: the
784 module will be called mc13783_ts.
786 config TOUCHSCREEN_USB_EGALAX
788 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
789 depends on TOUCHSCREEN_USB_COMPOSITE
791 config TOUCHSCREEN_USB_PANJIT
793 bool "PanJit device support" if EXPERT
794 depends on TOUCHSCREEN_USB_COMPOSITE
796 config TOUCHSCREEN_USB_3M
798 bool "3M/Microtouch EX II series device support" if EXPERT
799 depends on TOUCHSCREEN_USB_COMPOSITE
801 config TOUCHSCREEN_USB_ITM
803 bool "ITM device support" if EXPERT
804 depends on TOUCHSCREEN_USB_COMPOSITE
806 config TOUCHSCREEN_USB_ETURBO
808 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
809 depends on TOUCHSCREEN_USB_COMPOSITE
811 config TOUCHSCREEN_USB_GUNZE
813 bool "Gunze AHL61 device support" if EXPERT
814 depends on TOUCHSCREEN_USB_COMPOSITE
816 config TOUCHSCREEN_USB_DMC_TSC10
818 bool "DMC TSC-10/25 device support" if EXPERT
819 depends on TOUCHSCREEN_USB_COMPOSITE
821 config TOUCHSCREEN_USB_IRTOUCH
823 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
824 depends on TOUCHSCREEN_USB_COMPOSITE
826 config TOUCHSCREEN_USB_IDEALTEK
828 bool "IdealTEK URTC1000 device support" if EXPERT
829 depends on TOUCHSCREEN_USB_COMPOSITE
831 config TOUCHSCREEN_USB_GENERAL_TOUCH
833 bool "GeneralTouch Touchscreen device support" if EXPERT
834 depends on TOUCHSCREEN_USB_COMPOSITE
836 config TOUCHSCREEN_USB_GOTOP
838 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
839 depends on TOUCHSCREEN_USB_COMPOSITE
841 config TOUCHSCREEN_USB_JASTEC
843 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
844 depends on TOUCHSCREEN_USB_COMPOSITE
846 config TOUCHSCREEN_USB_ELO
848 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
849 depends on TOUCHSCREEN_USB_COMPOSITE
851 config TOUCHSCREEN_USB_E2I
853 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
854 depends on TOUCHSCREEN_USB_COMPOSITE
856 config TOUCHSCREEN_USB_ZYTRONIC
858 bool "Zytronic controller" if EXPERT
859 depends on TOUCHSCREEN_USB_COMPOSITE
861 config TOUCHSCREEN_USB_ETT_TC45USB
863 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
864 depends on TOUCHSCREEN_USB_COMPOSITE
866 config TOUCHSCREEN_USB_NEXIO
868 bool "NEXIO/iNexio device support" if EXPERT
869 depends on TOUCHSCREEN_USB_COMPOSITE
871 config TOUCHSCREEN_USB_EASYTOUCH
873 bool "EasyTouch USB Touch controller device support" if EMBEDDED
874 depends on TOUCHSCREEN_USB_COMPOSITE
876 Say Y here if you have an EasyTouch USB Touch controller.
879 config TOUCHSCREEN_TOUCHIT213
880 tristate "Sahara TouchIT-213 touchscreen"
883 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
887 To compile this driver as a module, choose M here: the
888 module will be called touchit213.
890 config TOUCHSCREEN_TSC_SERIO
891 tristate "TSC-10/25/40 serial touchscreen support"
894 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
899 To compile this driver as a module, choose M here: the
900 module will be called tsc40.
902 config TOUCHSCREEN_TSC2005
903 tristate "TSC2005 based touchscreens"
904 depends on SPI_MASTER && GENERIC_HARDIRQS
906 Say Y here if you have a TSC2005 based touchscreen.
910 To compile this driver as a module, choose M here: the
911 module will be called tsc2005.
913 config TOUCHSCREEN_TSC2007
914 tristate "TSC2007 based touchscreens"
917 Say Y here if you have a TSC2007 based touchscreen.
921 To compile this driver as a module, choose M here: the
922 module will be called tsc2007.
924 config TOUCHSCREEN_W90X900
925 tristate "W90P910 touchscreen driver"
928 Say Y here if you have a W90P910 based touchscreen.
930 To compile this driver as a module, choose M here: the
931 module will be called w90p910_ts.
933 config TOUCHSCREEN_PCAP
934 tristate "Motorola PCAP touchscreen"
937 Say Y here if you have a Motorola EZX telephone and
938 want to enable support for the built-in touchscreen.
940 To compile this driver as a module, choose M here: the
941 module will be called pcap_ts.
943 config TOUCHSCREEN_ST1232
944 tristate "Sitronix ST1232 touchscreen controllers"
947 Say Y here if you want to support Sitronix ST1232
948 touchscreen controller.
952 To compile this driver as a module, choose M here: the
953 module will be called st1232_ts.
955 config TOUCHSCREEN_STMPE
956 tristate "STMicroelectronics STMPE touchscreens"
959 Say Y here if you want support for STMicroelectronics
960 STMPE touchscreen controllers.
962 To compile this driver as a module, choose M here: the
963 module will be called stmpe-ts.
965 config TOUCHSCREEN_TPS6507X
966 tristate "TPS6507x based touchscreens"
969 Say Y here if you have a TPS6507x based touchscreen
974 To compile this driver as a module, choose M here: the
975 module will be called tps6507x_ts.
977 config TOUCHSCREEN_SYNAPTICS_S3528
978 tristate "Synaptics S7020 touchscreen"
981 This enables support for Synaptics S3528 over I2C based touchscreens.