drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_88PM860X
  15         tristate "Marvell 88PM860x touchscreen"
  16         depends on MFD_88PM860X
  17         help
  18           Say Y here if you have a 88PM860x PMIC and want to enable
  19           support for the built-in touchscreen.
  20
  21           If unsure, say N.
  22
  23           To compile this driver as a module, choose M here: the
  24           module will be called 88pm860x-ts.
  25
  26 config TOUCHSCREEN_ADS7846
  27         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  28         depends on SPI_MASTER
  29         depends on HWMON = n || HWMON
  30         help
  31           Say Y here if you have a touchscreen interface using the
  32           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  33           and your board-specific setup code includes that in its
  34           table of SPI devices.
  35
  36           If HWMON is selected, and the driver is told the reference voltage
  37           on your board, you will also get hwmon interfaces for the voltage
  38           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  39
  40           If unsure, say N (but it's safe to say "Y").
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called ads7846.
  44
  45 config TOUCHSCREEN_AD7877
  46         tristate "AD7877 based touchscreens"
  47         depends on SPI_MASTER
  48         help
  49           Say Y here if you have a touchscreen interface using the
  50           AD7877 controller, and your board-specific initialization
  51           code includes that in its table of SPI devices.
  52
  53           If unsure, say N (but it's safe to say "Y").
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called ad7877.
  57
  58 config TOUCHSCREEN_AD7879
  59         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  60         help
  61           Say Y here if you want to support a touchscreen interface using
  62           the AD7879-1/AD7889-1 controller.
  63
  64           You should select a bus connection too.
  65
  66           To compile this driver as a module, choose M here: the
  67           module will be called ad7879.
  68
  69 config TOUCHSCREEN_AD7879_I2C
  70         tristate "support I2C bus connection"
  71         depends on TOUCHSCREEN_AD7879 && I2C
  72         help
  73           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  74
  75           To compile this driver as a module, choose M here: the
  76           module will be called ad7879-i2c.
  77
  78 config TOUCHSCREEN_AD7879_SPI
  79         tristate "support SPI bus connection"
  80         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  81         help
  82           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  83
  84           If unsure, say N (but it's safe to say "Y").
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called ad7879-spi.
  88
  89 config TOUCHSCREEN_ATMEL_MXT
  90         tristate "Atmel mXT I2C Touchscreen"
  91         depends on I2C
  92         help
  93           Say Y here if you have Atmel mXT series I2C touchscreen,
  94           such as AT42QT602240/ATMXT224, connected to your system.
  95
  96           If unsure, say N.
  97
  98           To compile this driver as a module, choose M here: the
  99           module will be called atmel_mxt_ts.
 100
 101 config TOUCHSCREEN_AUO_PIXCIR
 102         tristate "AUO in-cell touchscreen using Pixcir ICs"
 103         depends on I2C
 104         depends on GPIOLIB
 105         help
 106           Say Y here if you have a AUO display with in-cell touchscreen
 107           using Pixcir ICs.
 108
 109           If unsure, say N.
 110
 111           To compile this driver as a module, choose M here: the
 112           module will be called auo-pixcir-ts.
 113
 114 config TOUCHSCREEN_BITSY
 115         tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
 116         depends on SA1100_BITSY
 117         select SERIO
 118         help
 119           Say Y here if you have the h3600 (Bitsy) touchscreen.
 120
 121           If unsure, say N.
 122
 123           To compile this driver as a module, choose M here: the
 124           module will be called h3600_ts_input.
 125
 126 config TOUCHSCREEN_BU21013
 127         tristate "BU21013 based touch panel controllers"
 128         depends on I2C
 129         help
 130           Say Y here if you have a bu21013 touchscreen connected to
 131           your system.
 132
 133           If unsure, say N.
 134
 135           To compile this driver as a module, choose M here: the
 136           module will be called bu21013_ts.
 137
 138 config TOUCHSCREEN_CY8CTMG110
 139         tristate "cy8ctmg110 touchscreen"
 140         depends on I2C
 141         depends on GPIOLIB
 142         help
 143           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 144           an AAVA device.
 145
 146           If unsure, say N.
 147
 148           To compile this driver as a module, choose M here: the
 149           module will be called cy8ctmg110_ts.
 150
 151 config TOUCHSCREEN_CYTTSP_CORE
 152         tristate "Cypress TTSP touchscreen"
 153         help
 154           Say Y here if you have a touchscreen using controller from
 155           the Cypress TrueTouch(tm) Standard Product family connected
 156           to your system. You will also need to select appropriate
 157           bus connection below.
 158
 159           If unsure, say N.
 160
 161           To compile this driver as a module, choose M here: the
 162           module will be called cyttsp_core.
 163
 164 config TOUCHSCREEN_CYTTSP_I2C
 165         tristate "support I2C bus connection"
 166         depends on TOUCHSCREEN_CYTTSP_CORE && I2C
 167         help
 168           Say Y here if the touchscreen is connected via I2C bus.
 169
 170           To compile this driver as a module, choose M here: the
 171           module will be called cyttsp_i2c.
 172
 173 config TOUCHSCREEN_CYTTSP_SPI
 174         tristate "support SPI bus connection"
 175         depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
 176         help
 177           Say Y here if the touchscreen is connected via SPI bus.
 178
 179           To compile this driver as a module, choose M here: the
 180           module will be called cyttsp_spi.
 181
 182 config TOUCHSCREEN_DA9034
 183         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 184         depends on PMIC_DA903X
 185         default y
 186         help
 187           Say Y here to enable the support for the touchscreen found
 188           on Dialog Semiconductor DA9034 PMIC.
 189
 190           If unsure, say N.
 191
 192           To compile this driver as a module, choose M here: the
 193           module will be called da9034-ts.
 194
 195 config TOUCHSCREEN_DA9052
 196         tristate "Dialog DA9052/DA9053 TSI"
 197         depends on PMIC_DA9052
 198         help
 199           Say Y here to support the touchscreen found on Dialog Semiconductor
 200           DA9052-BC and DA9053-AA/Bx PMICs.
 201
 202           If unsure, say N.
 203
 204           To compile this driver as a module, choose M here: the
 205           module will be called da9052_tsi.
 206
 207 config TOUCHSCREEN_DYNAPRO
 208         tristate "Dynapro serial touchscreen"
 209         select SERIO
 210         help
 211           Say Y here if you have a Dynapro serial touchscreen connected to
 212           your system.
 213
 214           If unsure, say N.
 215
 216           To compile this driver as a module, choose M here: the
 217           module will be called dynapro.
 218
 219 config TOUCHSCREEN_HAMPSHIRE
 220         tristate "Hampshire serial touchscreen"
 221         select SERIO
 222         help
 223           Say Y here if you have a Hampshire serial touchscreen connected to
 224           your system.
 225
 226           If unsure, say N.
 227
 228           To compile this driver as a module, choose M here: the
 229           module will be called hampshire.
 230
 231 config TOUCHSCREEN_EETI
 232         tristate "EETI touchscreen panel support"
 233         depends on I2C
 234         help
 235           Say Y here to enable support for I2C connected EETI touch panels.
 236
 237           To compile this driver as a module, choose M here: the
 238           module will be called eeti_ts.
 239
 240 config TOUCHSCREEN_EGALAX
 241         tristate "EETI eGalax multi-touch panel support"
 242         depends on I2C
 243         help
 244           Say Y here to enable support for I2C connected EETI
 245           eGalax multi-touch panels.
 246
 247           To compile this driver as a module, choose M here: the
 248           module will be called egalax_ts.
 249
 250 config TOUCHSCREEN_FUJITSU
 251         tristate "Fujitsu serial touchscreen"
 252         select SERIO
 253         help
 254           Say Y here if you have the Fujitsu touchscreen (such as one
 255           installed in Lifebook P series laptop) connected to your
 256           system.
 257
 258           If unsure, say N.
 259
 260           To compile this driver as a module, choose M here: the
 261           module will be called fujitsu-ts.
 262
 263 config TOUCHSCREEN_ILI210X
 264         tristate "Ilitek ILI210X based touchscreen"
 265         depends on I2C
 266         help
 267           Say Y here if you have a ILI210X based touchscreen
 268           controller. This driver supports models ILI2102,
 269           ILI2102s, ILI2103, ILI2103s and ILI2105.
 270           Such kind of chipsets can be found in Amazon Kindle Fire
 271           touchscreens.
 272
 273           If unsure, say N.
 274
 275           To compile this driver as a module, choose M here: the
 276           module will be called ili210x.
 277
 278 config TOUCHSCREEN_S3C2410
 279         tristate "Samsung S3C2410/generic touchscreen input driver"
 280         depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
 281         select S3C_ADC
 282         help
 283           Say Y here if you have the s3c2410 touchscreen.
 284
 285           If unsure, say N.
 286
 287           To compile this driver as a module, choose M here: the
 288           module will be called s3c2410_ts.
 289
 290 config TOUCHSCREEN_GUNZE
 291         tristate "Gunze AHL-51S touchscreen"
 292         select SERIO
 293         help
 294           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 295           your system.
 296
 297           If unsure, say N.
 298
 299           To compile this driver as a module, choose M here: the
 300           module will be called gunze.
 301
 302 config TOUCHSCREEN_ELO
 303         tristate "Elo serial touchscreens"
 304         select SERIO
 305         help
 306           Say Y here if you have an Elo serial touchscreen connected to
 307           your system.
 308
 309           If unsure, say N.
 310
 311           To compile this driver as a module, choose M here: the
 312           module will be called elo.
 313
 314 config TOUCHSCREEN_WACOM_W8001
 315         tristate "Wacom W8001 penabled serial touchscreen"
 316         select SERIO
 317         help
 318           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 319           connected to your system.
 320
 321           If unsure, say N.
 322
 323           To compile this driver as a module, choose M here: the
 324           module will be called wacom_w8001.
 325
 326 config TOUCHSCREEN_WACOM_I2C
 327         tristate "Wacom Tablet support (I2C)"
 328         depends on I2C
 329         help
 330           Say Y here if you want to use the I2C version of the Wacom
 331           Pen Tablet.
 332
 333           If unsure, say N.
 334
 335           To compile this driver as a module, choose M here: the module
 336           will be called wacom_i2c.
 337
 338 config TOUCHSCREEN_LPC32XX
 339         tristate "LPC32XX touchscreen controller"
 340         depends on ARCH_LPC32XX
 341         help
 342           Say Y here if you have a LPC32XX device and want
 343           to support the built-in touchscreen.
 344
 345           To compile this driver as a module, choose M here: the
 346           module will be called lpc32xx_ts.
 347
 348 config TOUCHSCREEN_MAX11801
 349         tristate "MAX11801 based touchscreens"
 350         depends on I2C
 351         help
 352           Say Y here if you have a MAX11801 based touchscreen
 353           controller.
 354
 355           If unsure, say N.
 356
 357           To compile this driver as a module, choose M here: the
 358           module will be called max11801_ts.
 359
 360 config TOUCHSCREEN_MCS5000
 361         tristate "MELFAS MCS-5000 touchscreen"
 362         depends on I2C
 363         help
 364           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 365           chip in your system.
 366
 367           If unsure, say N.
 368
 369           To compile this driver as a module, choose M here: the
 370           module will be called mcs5000_ts.
 371
 372 config TOUCHSCREEN_MTOUCH
 373         tristate "MicroTouch serial touchscreens"
 374         select SERIO
 375         help
 376           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 377           your system.
 378
 379           If unsure, say N.
 380
 381           To compile this driver as a module, choose M here: the
 382           module will be called mtouch.
 383
 384 config TOUCHSCREEN_INEXIO
 385         tristate "iNexio serial touchscreens"
 386         select SERIO
 387         help
 388           Say Y here if you have an iNexio serial touchscreen connected to
 389           your system.
 390
 391           If unsure, say N.
 392
 393           To compile this driver as a module, choose M here: the
 394           module will be called inexio.
 395
 396 config TOUCHSCREEN_INTEL_MID
 397         tristate "Intel MID platform resistive touchscreen"
 398         depends on INTEL_SCU_IPC
 399         help
 400           Say Y here if you have a Intel MID based touchscreen in
 401           your system.
 402
 403           If unsure, say N.
 404
 405           To compile this driver as a module, choose M here: the
 406           module will be called intel_mid_touch.
 407
 408 config TOUCHSCREEN_MK712
 409         tristate "ICS MicroClock MK712 touchscreen"
 410         help
 411           Say Y here if you have the ICS MicroClock MK712 touchscreen
 412           controller chip in your system.
 413
 414           If unsure, say N.
 415
 416           To compile this driver as a module, choose M here: the
 417           module will be called mk712.
 418
 419 config TOUCHSCREEN_HP600
 420         tristate "HP Jornada 6xx touchscreen"
 421         depends on SH_HP6XX && SH_ADC
 422         help
 423           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 424           support the built-in touchscreen.
 425
 426           To compile this driver as a module, choose M here: the
 427           module will be called hp680_ts_input.
 428
 429 config TOUCHSCREEN_HP7XX
 430         tristate "HP Jornada 7xx touchscreen"
 431         depends on SA1100_JORNADA720_SSP
 432         help
 433           Say Y here if you have a HP Jornada 710/720/728 and want
 434           to support the built-in touchscreen.
 435
 436           To compile this driver as a module, choose M here: the
 437           module will be called jornada720_ts.
 438
 439 config TOUCHSCREEN_HTCPEN
 440         tristate "HTC Shift X9500 touchscreen"
 441         depends on ISA
 442         help
 443           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 444           Clio / Shangrila and want to support the built-in touchscreen.
 445
 446           If unsure, say N.
 447
 448           To compile this driver as a module, choose M here: the
 449           module will be called htcpen.
 450
 451 config TOUCHSCREEN_PENMOUNT
 452         tristate "Penmount serial touchscreen"
 453         select SERIO
 454         help
 455           Say Y here if you have a Penmount serial touchscreen connected to
 456           your system.
 457
 458           If unsure, say N.
 459
 460           To compile this driver as a module, choose M here: the
 461           module will be called penmount.
 462
 463 config TOUCHSCREEN_MIGOR
 464         tristate "Renesas MIGO-R touchscreen"
 465         depends on SH_MIGOR && I2C
 466         help
 467           Say Y here to enable MIGO-R touchscreen support.
 468
 469           If unsure, say N.
 470
 471           To compile this driver as a module, choose M here: the
 472           module will be called migor_ts.
 473
 474 config TOUCHSCREEN_TNETV107X
 475         tristate "TI TNETV107X touchscreen support"
 476         depends on ARCH_DAVINCI_TNETV107X
 477         help
 478           Say Y here if you want to use the TNETV107X touchscreen.
 479
 480           To compile this driver as a module, choose M here: the
 481           module will be called tnetv107x-ts.
 482
 483 config TOUCHSCREEN_TOUCHRIGHT
 484         tristate "Touchright serial touchscreen"
 485         select SERIO
 486         help
 487           Say Y here if you have a Touchright serial touchscreen connected to
 488           your system.
 489
 490           If unsure, say N.
 491
 492           To compile this driver as a module, choose M here: the
 493           module will be called touchright.
 494
 495 config TOUCHSCREEN_TOUCHWIN
 496         tristate "Touchwin serial touchscreen"
 497         select SERIO
 498         help
 499           Say Y here if you have a Touchwin serial touchscreen connected to
 500           your system.
 501
 502           If unsure, say N.
 503
 504           To compile this driver as a module, choose M here: the
 505           module will be called touchwin.
 506
 507 config TOUCHSCREEN_TI_TSCADC
 508         tristate "TI Touchscreen Interface"
 509         depends on ARCH_OMAP2PLUS
 510         help
 511           Say Y here if you have 4/5/8 wire touchscreen controller
 512           to be connected to the ADC controller on your TI AM335x SoC.
 513
 514           If unsure, say N.
 515
 516           To compile this driver as a module, choose M here: the
 517           module will be called ti_tscadc.
 518
 519 config TOUCHSCREEN_ATMEL_TSADCC
 520         tristate "Atmel Touchscreen Interface"
 521         depends on ARCH_AT91
 522         help
 523           Say Y here if you have a 4-wire touchscreen connected to the
 524           ADC Controller on your Atmel SoC.
 525
 526           If unsure, say N.
 527
 528           To compile this driver as a module, choose M here: the
 529           module will be called atmel_tsadcc.
 530
 531 config TOUCHSCREEN_UCB1400
 532         tristate "Philips UCB1400 touchscreen"
 533         depends on AC97_BUS
 534         depends on UCB1400_CORE
 535         help
 536           This enables support for the Philips UCB1400 touchscreen interface.
 537           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 538           will be initialized only after the ALSA subsystem has been
 539           brought up and the UCB1400 detected.  You therefore have to
 540           configure ALSA support as well (either built-in or modular,
 541           independently of whether this driver is itself built-in or
 542           modular) for this driver to work.
 543
 544           To compile this driver as a module, choose M here: the
 545           module will be called ucb1400_ts.
 546
 547 config TOUCHSCREEN_PIXCIR
 548         tristate "PIXCIR I2C touchscreens"
 549         depends on I2C
 550         help
 551           Say Y here if you have a pixcir i2c touchscreen
 552           controller.
 553
 554           If unsure, say N.
 555
 556           To compile this driver as a module, choose M here: the
 557           module will be called pixcir_i2c_ts.
 558
 559 config TOUCHSCREEN_WM831X
 560         tristate "Support for WM831x touchscreen controllers"
 561         depends on MFD_WM831X
 562         help
 563           This enables support for the touchscreen controller on the WM831x
 564           series of PMICs.
 565
 566           To compile this driver as a module, choose M here: the
 567           module will be called wm831x-ts.
 568
 569 config TOUCHSCREEN_WM97XX
 570         tristate "Support for WM97xx AC97 touchscreen controllers"
 571         depends on AC97_BUS
 572         help
 573           Say Y here if you have a Wolfson Microelectronics WM97xx
 574           touchscreen connected to your system. Note that this option
 575           only enables core driver, you will also need to select
 576           support for appropriate chip below.
 577
 578           If unsure, say N.
 579
 580           To compile this driver as a module, choose M here: the
 581           module will be called wm97xx-ts.
 582
 583 config TOUCHSCREEN_WM9705
 584         bool "WM9705 Touchscreen interface support"
 585         depends on TOUCHSCREEN_WM97XX
 586         default y
 587         help
 588           Say Y here to enable support for the Wolfson Microelectronics
 589           WM9705 touchscreen controller.
 590
 591 config TOUCHSCREEN_WM9712
 592         bool "WM9712 Touchscreen interface support"
 593         depends on TOUCHSCREEN_WM97XX
 594         default y
 595         help
 596           Say Y here to enable support for the Wolfson Microelectronics
 597           WM9712 touchscreen controller.
 598
 599 config TOUCHSCREEN_WM9713
 600         bool "WM9713 Touchscreen interface support"
 601         depends on TOUCHSCREEN_WM97XX
 602         default y
 603         help
 604           Say Y here to enable support for the Wolfson Microelectronics
 605           WM9713 touchscreen controller.
 606
 607 config TOUCHSCREEN_WM97XX_ATMEL
 608         tristate "WM97xx Atmel accelerated touch"
 609         depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
 610         help
 611           Say Y here for support for streaming mode with WM97xx touchscreens
 612           on Atmel AT91 or AVR32 systems with an AC97C module.
 613
 614           Be aware that this will use channel B in the controller for
 615           streaming data, this must not conflict with other AC97C drivers.
 616
 617           If unsure, say N.
 618
 619           To compile this driver as a module, choose M here: the module will
 620           be called atmel-wm97xx.
 621
 622 config TOUCHSCREEN_WM97XX_MAINSTONE
 623         tristate "WM97xx Mainstone/Palm accelerated touch"
 624         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 625         help
 626           Say Y here for support for streaming mode with WM97xx touchscreens
 627           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 628
 629           If unsure, say N.
 630
 631           To compile this driver as a module, choose M here: the
 632           module will be called mainstone-wm97xx.
 633
 634 config TOUCHSCREEN_WM97XX_ZYLONITE
 635         tristate "Zylonite accelerated touch"
 636         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 637         select TOUCHSCREEN_WM9713
 638         help
 639           Say Y here for support for streaming mode with the touchscreen
 640           on Zylonite systems.
 641
 642           If unsure, say N.
 643
 644           To compile this driver as a module, choose M here: the
 645           module will be called zylonite-wm97xx.
 646
 647 config TOUCHSCREEN_USB_COMPOSITE
 648         tristate "USB Touchscreen Driver"
 649         depends on USB_ARCH_HAS_HCD
 650         select USB
 651         help
 652           USB Touchscreen driver for:
 653           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 654           - PanJit TouchSet USB
 655           - 3M MicroTouch USB (EX II series)
 656           - ITM
 657           - some other eTurboTouch
 658           - Gunze AHL61
 659           - DMC TSC-10/25
 660           - IRTOUCHSYSTEMS/UNITOP
 661           - IdealTEK URTC1000
 662           - GoTop Super_Q2/GogoPen/PenPower tablets
 663           - JASTEC USB Touch Controller/DigiTech DTR-02U
 664           - Zytronic controllers
 665           - Elo TouchSystems 2700 IntelliTouch
 666           - EasyTouch USB Touch Controller from Data Modul
 667           - e2i (Mimo monitors)
 668
 669           Have a look at <http://linux.chapter7.ch/touchkit/> for
 670           a usage description and the required user-space stuff.
 671
 672           To compile this driver as a module, choose M here: the
 673           module will be called usbtouchscreen.
 674
 675 config TOUCHSCREEN_MC13783
 676         tristate "Freescale MC13783 touchscreen input driver"
 677         depends on MFD_MC13783
 678         help
 679           Say Y here if you have an Freescale MC13783 PMIC on your
 680           board and want to use its touchscreen
 681
 682           If unsure, say N.
 683
 684           To compile this driver as a module, choose M here: the
 685           module will be called mc13783_ts.
 686
 687 config TOUCHSCREEN_USB_EGALAX
 688         default y
 689         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 690         depends on TOUCHSCREEN_USB_COMPOSITE
 691
 692 config TOUCHSCREEN_USB_PANJIT
 693         default y
 694         bool "PanJit device support" if EXPERT
 695         depends on TOUCHSCREEN_USB_COMPOSITE
 696
 697 config TOUCHSCREEN_USB_3M
 698         default y
 699         bool "3M/Microtouch EX II series device support" if EXPERT
 700         depends on TOUCHSCREEN_USB_COMPOSITE
 701
 702 config TOUCHSCREEN_USB_ITM
 703         default y
 704         bool "ITM device support" if EXPERT
 705         depends on TOUCHSCREEN_USB_COMPOSITE
 706
 707 config TOUCHSCREEN_USB_ETURBO
 708         default y
 709         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 710         depends on TOUCHSCREEN_USB_COMPOSITE
 711
 712 config TOUCHSCREEN_USB_GUNZE
 713         default y
 714         bool "Gunze AHL61 device support" if EXPERT
 715         depends on TOUCHSCREEN_USB_COMPOSITE
 716
 717 config TOUCHSCREEN_USB_DMC_TSC10
 718         default y
 719         bool "DMC TSC-10/25 device support" if EXPERT
 720         depends on TOUCHSCREEN_USB_COMPOSITE
 721
 722 config TOUCHSCREEN_USB_IRTOUCH
 723         default y
 724         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 725         depends on TOUCHSCREEN_USB_COMPOSITE
 726
 727 config TOUCHSCREEN_USB_IDEALTEK
 728         default y
 729         bool "IdealTEK URTC1000 device support" if EXPERT
 730         depends on TOUCHSCREEN_USB_COMPOSITE
 731
 732 config TOUCHSCREEN_USB_GENERAL_TOUCH
 733         default y
 734         bool "GeneralTouch Touchscreen device support" if EXPERT
 735         depends on TOUCHSCREEN_USB_COMPOSITE
 736
 737 config TOUCHSCREEN_USB_GOTOP
 738         default y
 739         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 740         depends on TOUCHSCREEN_USB_COMPOSITE
 741
 742 config TOUCHSCREEN_USB_JASTEC
 743         default y
 744         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 745         depends on TOUCHSCREEN_USB_COMPOSITE
 746
 747 config TOUCHSCREEN_USB_ELO
 748         default y
 749         bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
 750         depends on TOUCHSCREEN_USB_COMPOSITE
 751
 752 config TOUCHSCREEN_USB_E2I
 753         default y
 754         bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
 755         depends on TOUCHSCREEN_USB_COMPOSITE
 756
 757 config TOUCHSCREEN_USB_ZYTRONIC
 758         default y
 759         bool "Zytronic controller" if EXPERT
 760         depends on TOUCHSCREEN_USB_COMPOSITE
 761
 762 config TOUCHSCREEN_USB_ETT_TC45USB
 763         default y
 764         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 765         depends on TOUCHSCREEN_USB_COMPOSITE
 766
 767 config TOUCHSCREEN_USB_NEXIO
 768         default y
 769         bool "NEXIO/iNexio device support" if EXPERT
 770         depends on TOUCHSCREEN_USB_COMPOSITE
 771
 772 config TOUCHSCREEN_USB_EASYTOUCH
 773         default y
 774         bool "EasyTouch USB Touch controller device support" if EMBEDDED
 775         depends on TOUCHSCREEN_USB_COMPOSITE
 776         help
 777           Say Y here if you have an EasyTouch USB Touch controller.
 778           If unsure, say N.
 779
 780 config TOUCHSCREEN_TOUCHIT213
 781         tristate "Sahara TouchIT-213 touchscreen"
 782         select SERIO
 783         help
 784           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 785
 786           If unsure, say N.
 787
 788           To compile this driver as a module, choose M here: the
 789           module will be called touchit213.
 790
 791 config TOUCHSCREEN_TSC_SERIO
 792         tristate "TSC-10/25/40 serial touchscreen support"
 793         select SERIO
 794         help
 795           Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
 796           to your system.
 797
 798           If unsure, say N.
 799
 800           To compile this driver as a module, choose M here: the
 801           module will be called tsc40.
 802
 803 config TOUCHSCREEN_TSC2005
 804         tristate "TSC2005 based touchscreens"
 805         depends on SPI_MASTER && GENERIC_HARDIRQS
 806         help
 807           Say Y here if you have a TSC2005 based touchscreen.
 808
 809           If unsure, say N.
 810
 811           To compile this driver as a module, choose M here: the
 812           module will be called tsc2005.
 813
 814 config TOUCHSCREEN_TSC2007
 815         tristate "TSC2007 based touchscreens"
 816         depends on I2C
 817         help
 818           Say Y here if you have a TSC2007 based touchscreen.
 819
 820           If unsure, say N.
 821
 822           To compile this driver as a module, choose M here: the
 823           module will be called tsc2007.
 824
 825 config TOUCHSCREEN_W90X900
 826         tristate "W90P910 touchscreen driver"
 827         depends on HAVE_CLK
 828         help
 829           Say Y here if you have a W90P910 based touchscreen.
 830
 831           To compile this driver as a module, choose M here: the
 832           module will be called w90p910_ts.
 833
 834 config TOUCHSCREEN_PCAP
 835         tristate "Motorola PCAP touchscreen"
 836         depends on EZX_PCAP
 837         help
 838           Say Y here if you have a Motorola EZX telephone and
 839           want to enable support for the built-in touchscreen.
 840
 841           To compile this driver as a module, choose M here: the
 842           module will be called pcap_ts.
 843
 844 config TOUCHSCREEN_ST1232
 845         tristate "Sitronix ST1232 touchscreen controllers"
 846         depends on I2C
 847         help
 848           Say Y here if you want to support Sitronix ST1232
 849           touchscreen controller.
 850
 851           If unsure, say N.
 852
 853           To compile this driver as a module, choose M here: the
 854           module will be called st1232_ts.
 855
 856 config TOUCHSCREEN_STMPE
 857         tristate "STMicroelectronics STMPE touchscreens"
 858         depends on MFD_STMPE
 859         help
 860           Say Y here if you want support for STMicroelectronics
 861           STMPE touchscreen controllers.
 862
 863           To compile this driver as a module, choose M here: the
 864           module will be called stmpe-ts.
 865
 866 config TOUCHSCREEN_TPS6507X
 867         tristate "TPS6507x based touchscreens"
 868         depends on I2C
 869         help
 870           Say Y here if you have a TPS6507x based touchscreen
 871           controller.
 872
 873           If unsure, say N.
 874
 875           To compile this driver as a module, choose M here: the
 876           module will be called tps6507x_ts.
 877
 878 endif