drivers/input/touchscreen/Kconfig

   1 #
   2 # Touchscreen driver configuration
   3 #
   4 menuconfig INPUT_TOUCHSCREEN
   5         bool "Touchscreens"
   6         help
   7           Say Y here, and a list of supported touchscreens will be displayed.
   8           This option doesn't affect the kernel.
   9
  10           If unsure, say Y.
  11
  12 if INPUT_TOUCHSCREEN
  13
  14 config TOUCHSCREEN_88PM860X
  15         tristate "Marvell 88PM860x touchscreen"
  16         depends on MFD_88PM860X
  17         help
  18           Say Y here if you have a 88PM860x PMIC and want to enable
  19           support for the built-in touchscreen.
  20
  21           If unsure, say N.
  22
  23           To compile this driver as a module, choose M here: the
  24           module will be called 88pm860x-ts.
  25
  26 config TOUCHSCREEN_ADS7846
  27         tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
  28         depends on SPI_MASTER
  29         depends on HWMON = n || HWMON
  30         help
  31           Say Y here if you have a touchscreen interface using the
  32           ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
  33           and your board-specific setup code includes that in its
  34           table of SPI devices.
  35
  36           If HWMON is selected, and the driver is told the reference voltage
  37           on your board, you will also get hwmon interfaces for the voltage
  38           (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
  39
  40           If unsure, say N (but it's safe to say "Y").
  41
  42           To compile this driver as a module, choose M here: the
  43           module will be called ads7846.
  44
  45 config TOUCHSCREEN_AD7877
  46         tristate "AD7877 based touchscreens"
  47         depends on SPI_MASTER
  48         help
  49           Say Y here if you have a touchscreen interface using the
  50           AD7877 controller, and your board-specific initialization
  51           code includes that in its table of SPI devices.
  52
  53           If unsure, say N (but it's safe to say "Y").
  54
  55           To compile this driver as a module, choose M here: the
  56           module will be called ad7877.
  57
  58 config TOUCHSCREEN_AD7879
  59         tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
  60         help
  61           Say Y here if you want to support a touchscreen interface using
  62           the AD7879-1/AD7889-1 controller.
  63
  64           You should select a bus connection too.
  65
  66           To compile this driver as a module, choose M here: the
  67           module will be called ad7879.
  68
  69 config TOUCHSCREEN_AD7879_I2C
  70         tristate "support I2C bus connection"
  71         depends on TOUCHSCREEN_AD7879 && I2C
  72         help
  73           Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
  74
  75           To compile this driver as a module, choose M here: the
  76           module will be called ad7879-i2c.
  77
  78 config TOUCHSCREEN_AD7879_SPI
  79         tristate "support SPI bus connection"
  80         depends on TOUCHSCREEN_AD7879 && SPI_MASTER
  81         help
  82           Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
  83
  84           If unsure, say N (but it's safe to say "Y").
  85
  86           To compile this driver as a module, choose M here: the
  87           module will be called ad7879-spi.
  88
  89 config TOUCHSCREEN_BITSY
  90         tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
  91         depends on SA1100_BITSY
  92         select SERIO
  93         help
  94           Say Y here if you have the h3600 (Bitsy) touchscreen.
  95
  96           If unsure, say N.
  97
  98           To compile this driver as a module, choose M here: the
  99           module will be called h3600_ts_input.
 100
 101 config TOUCHSCREEN_BU21013
 102         tristate "BU21013 based touch panel controllers"
 103         depends on I2C
 104         help
 105           Say Y here if you have a bu21013 touchscreen connected to
 106           your system.
 107
 108           If unsure, say N.
 109
 110           To compile this driver as a module, choose M here: the
 111           module will be called bu21013_ts.
 112
 113 config TOUCHSCREEN_CY8CTMG110
 114         tristate "cy8ctmg110 touchscreen"
 115         depends on I2C
 116         depends on GPIOLIB
 117
 118         help
 119           Say Y here if you have a cy8ctmg110 capacitive touchscreen on
 120           an AAVA device.
 121
 122           If unsure, say N.
 123
 124           To compile this driver as a module, choose M here: the
 125           module will be called cy8ctmg110_ts.
 126
 127 config TOUCHSCREEN_DA9034
 128         tristate "Touchscreen support for Dialog Semiconductor DA9034"
 129         depends on PMIC_DA903X
 130         default y
 131         help
 132           Say Y here to enable the support for the touchscreen found
 133           on Dialog Semiconductor DA9034 PMIC.
 134
 135 config TOUCHSCREEN_DYNAPRO
 136         tristate "Dynapro serial touchscreen"
 137         select SERIO
 138         help
 139           Say Y here if you have a Dynapro serial touchscreen connected to
 140           your system.
 141
 142           If unsure, say N.
 143
 144           To compile this driver as a module, choose M here: the
 145           module will be called dynapro.
 146
 147 config TOUCHSCREEN_HAMPSHIRE
 148         tristate "Hampshire serial touchscreen"
 149         select SERIO
 150         help
 151           Say Y here if you have a Hampshire serial touchscreen connected to
 152           your system.
 153
 154           If unsure, say N.
 155
 156           To compile this driver as a module, choose M here: the
 157           module will be called hampshire.
 158
 159 config TOUCHSCREEN_EETI
 160         tristate "EETI touchscreen panel support"
 161         depends on I2C
 162         help
 163           Say Y here to enable support for I2C connected EETI touch panels.
 164
 165           To compile this driver as a module, choose M here: the
 166           module will be called eeti_ts.
 167
 168 config TOUCHSCREEN_FUJITSU
 169         tristate "Fujitsu serial touchscreen"
 170         select SERIO
 171         help
 172           Say Y here if you have the Fujitsu touchscreen (such as one
 173           installed in Lifebook P series laptop) connected to your
 174           system.
 175
 176           If unsure, say N.
 177
 178           To compile this driver as a module, choose M here: the
 179           module will be called fujitsu-ts.
 180
 181 config TOUCHSCREEN_S3C2410
 182         tristate "Samsung S3C2410/generic touchscreen input driver"
 183         depends on ARCH_S3C2410 || SAMSUNG_DEV_TS
 184         select S3C_ADC
 185         help
 186           Say Y here if you have the s3c2410 touchscreen.
 187
 188           If unsure, say N.
 189
 190           To compile this driver as a module, choose M here: the
 191           module will be called s3c2410_ts.
 192
 193 config TOUCHSCREEN_GUNZE
 194         tristate "Gunze AHL-51S touchscreen"
 195         select SERIO
 196         help
 197           Say Y here if you have the Gunze AHL-51 touchscreen connected to
 198           your system.
 199
 200           If unsure, say N.
 201
 202           To compile this driver as a module, choose M here: the
 203           module will be called gunze.
 204
 205 config TOUCHSCREEN_ELO
 206         tristate "Elo serial touchscreens"
 207         select SERIO
 208         help
 209           Say Y here if you have an Elo serial touchscreen connected to
 210           your system.
 211
 212           If unsure, say N.
 213
 214           To compile this driver as a module, choose M here: the
 215           module will be called elo.
 216
 217 config TOUCHSCREEN_WACOM_W8001
 218         tristate "Wacom W8001 penabled serial touchscreen"
 219         select SERIO
 220         help
 221           Say Y here if you have an Wacom W8001 penabled serial touchscreen
 222           connected to your system.
 223
 224           If unsure, say N.
 225
 226           To compile this driver as a module, choose M here: the
 227           module will be called wacom_w8001.
 228
 229 config TOUCHSCREEN_LPC32XX
 230         tristate "LPC32XX touchscreen controller"
 231         depends on ARCH_LPC32XX
 232         help
 233           Say Y here if you have a LPC32XX device and want
 234           to support the built-in touchscreen.
 235
 236           To compile this driver as a module, choose M here: the
 237           module will be called lpc32xx_ts.
 238
 239 config TOUCHSCREEN_MCS5000
 240         tristate "MELFAS MCS-5000 touchscreen"
 241         depends on I2C
 242         help
 243           Say Y here if you have the MELFAS MCS-5000 touchscreen controller
 244           chip in your system.
 245
 246           If unsure, say N.
 247
 248           To compile this driver as a module, choose M here: the
 249           module will be called mcs5000_ts.
 250
 251 config TOUCHSCREEN_MTOUCH
 252         tristate "MicroTouch serial touchscreens"
 253         select SERIO
 254         help
 255           Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
 256           your system.
 257
 258           If unsure, say N.
 259
 260           To compile this driver as a module, choose M here: the
 261           module will be called mtouch.
 262
 263 config TOUCHSCREEN_INEXIO
 264         tristate "iNexio serial touchscreens"
 265         select SERIO
 266         help
 267           Say Y here if you have an iNexio serial touchscreen connected to
 268           your system.
 269
 270           If unsure, say N.
 271
 272           To compile this driver as a module, choose M here: the
 273           module will be called inexio.
 274
 275 config TOUCHSCREEN_INTEL_MID
 276         tristate "Intel MID platform resistive touchscreen"
 277         depends on INTEL_SCU_IPC
 278         help
 279           Say Y here if you have a Intel MID based touchscreen in
 280           your system.
 281
 282           If unsure, say N.
 283
 284           To compile this driver as a module, choose M here: the
 285           module will be called intel_mid_touch.
 286
 287 config TOUCHSCREEN_MK712
 288         tristate "ICS MicroClock MK712 touchscreen"
 289         help
 290           Say Y here if you have the ICS MicroClock MK712 touchscreen
 291           controller chip in your system.
 292
 293           If unsure, say N.
 294
 295           To compile this driver as a module, choose M here: the
 296           module will be called mk712.
 297
 298 config TOUCHSCREEN_HP600
 299         tristate "HP Jornada 6xx touchscreen"
 300         depends on SH_HP6XX && SH_ADC
 301         help
 302           Say Y here if you have a HP Jornada 620/660/680/690 and want to
 303           support the built-in touchscreen.
 304
 305           To compile this driver as a module, choose M here: the
 306           module will be called hp680_ts_input.
 307
 308 config TOUCHSCREEN_HP7XX
 309         tristate "HP Jornada 7xx touchscreen"
 310         depends on SA1100_JORNADA720_SSP
 311         help
 312           Say Y here if you have a HP Jornada 710/720/728 and want
 313           to support the built-in touchscreen.
 314
 315           To compile this driver as a module, choose M here: the
 316           module will be called jornada720_ts.
 317
 318 config TOUCHSCREEN_HTCPEN
 319         tristate "HTC Shift X9500 touchscreen"
 320         depends on ISA
 321         help
 322           Say Y here if you have an HTC Shift UMPC also known as HTC X9500
 323           Clio / Shangrila and want to support the built-in touchscreen.
 324
 325           If unsure, say N.
 326
 327           To compile this driver as a module, choose M here: the
 328           module will be called htcpen.
 329
 330 config TOUCHSCREEN_PENMOUNT
 331         tristate "Penmount serial touchscreen"
 332         select SERIO
 333         help
 334           Say Y here if you have a Penmount serial touchscreen connected to
 335           your system.
 336
 337           If unsure, say N.
 338
 339           To compile this driver as a module, choose M here: the
 340           module will be called penmount.
 341
 342 config TOUCHSCREEN_QT602240
 343         tristate "QT602240 I2C Touchscreen"
 344         depends on I2C
 345         help
 346           Say Y here if you have the AT42QT602240/ATMXT224 I2C touchscreen
 347           connected to your system.
 348
 349           If unsure, say N.
 350
 351           To compile this driver as a module, choose M here: the
 352           module will be called qt602240_ts.
 353
 354 config TOUCHSCREEN_MIGOR
 355         tristate "Renesas MIGO-R touchscreen"
 356         depends on SH_MIGOR && I2C
 357         help
 358           Say Y here to enable MIGO-R touchscreen support.
 359
 360           If unsure, say N.
 361
 362           To compile this driver as a module, choose M here: the
 363           module will be called migor_ts.
 364
 365 config TOUCHSCREEN_TNETV107X
 366         tristate "TI TNETV107X touchscreen support"
 367         depends on ARCH_DAVINCI_TNETV107X
 368         help
 369           Say Y here if you want to use the TNETV107X touchscreen.
 370
 371           To compile this driver as a module, choose M here: the
 372           module will be called tnetv107x-ts.
 373
 374 config TOUCHSCREEN_TOUCHRIGHT
 375         tristate "Touchright serial touchscreen"
 376         select SERIO
 377         help
 378           Say Y here if you have a Touchright serial touchscreen connected to
 379           your system.
 380
 381           If unsure, say N.
 382
 383           To compile this driver as a module, choose M here: the
 384           module will be called touchright.
 385
 386 config TOUCHSCREEN_TOUCHWIN
 387         tristate "Touchwin serial touchscreen"
 388         select SERIO
 389         help
 390           Say Y here if you have a Touchwin serial touchscreen connected to
 391           your system.
 392
 393           If unsure, say N.
 394
 395           To compile this driver as a module, choose M here: the
 396           module will be called touchwin.
 397
 398 config TOUCHSCREEN_ATMEL_TSADCC
 399         tristate "Atmel Touchscreen Interface"
 400         depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
 401         help
 402           Say Y here if you have a 4-wire touchscreen connected to the
 403           ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
 404
 405           If unsure, say N.
 406
 407           To compile this driver as a module, choose M here: the
 408           module will be called atmel_tsadcc.
 409
 410 config TOUCHSCREEN_UCB1400
 411         tristate "Philips UCB1400 touchscreen"
 412         depends on AC97_BUS
 413         depends on UCB1400_CORE
 414         help
 415           This enables support for the Philips UCB1400 touchscreen interface.
 416           The UCB1400 is an AC97 audio codec.  The touchscreen interface
 417           will be initialized only after the ALSA subsystem has been
 418           brought up and the UCB1400 detected.  You therefore have to
 419           configure ALSA support as well (either built-in or modular,
 420           independently of whether this driver is itself built-in or
 421           modular) for this driver to work.
 422
 423           To compile this driver as a module, choose M here: the
 424           module will be called ucb1400_ts.
 425
 426 config TOUCHSCREEN_WM831X
 427         tristate "Support for WM831x touchscreen controllers"
 428         depends on MFD_WM831X
 429         help
 430           This enables support for the touchscreen controller on the WM831x
 431           series of PMICs.
 432
 433           To compile this driver as a module, choose M here: the
 434           module will be called wm831x-ts.
 435
 436 config TOUCHSCREEN_WM97XX
 437         tristate "Support for WM97xx AC97 touchscreen controllers"
 438         depends on AC97_BUS
 439         help
 440           Say Y here if you have a Wolfson Microelectronics WM97xx
 441           touchscreen connected to your system. Note that this option
 442           only enables core driver, you will also need to select
 443           support for appropriate chip below.
 444
 445           If unsure, say N.
 446
 447           To compile this driver as a module, choose M here: the
 448           module will be called wm97xx-ts.
 449
 450 config TOUCHSCREEN_WM9705
 451         bool "WM9705 Touchscreen interface support"
 452         depends on TOUCHSCREEN_WM97XX
 453         default y
 454         help
 455           Say Y here to enable support for the Wolfson Microelectronics
 456           WM9705 touchscreen controller.
 457
 458 config TOUCHSCREEN_WM9712
 459         bool "WM9712 Touchscreen interface support"
 460         depends on TOUCHSCREEN_WM97XX
 461         default y
 462         help
 463           Say Y here to enable support for the Wolfson Microelectronics
 464           WM9712 touchscreen controller.
 465
 466 config TOUCHSCREEN_WM9713
 467         bool "WM9713 Touchscreen interface support"
 468         depends on TOUCHSCREEN_WM97XX
 469         default y
 470         help
 471           Say Y here to enable support for the Wolfson Microelectronics
 472           WM9713 touchscreen controller.
 473
 474 config TOUCHSCREEN_WM97XX_ATMEL
 475         tristate "WM97xx Atmel accelerated touch"
 476         depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
 477         help
 478           Say Y here for support for streaming mode with WM97xx touchscreens
 479           on Atmel AT91 or AVR32 systems with an AC97C module.
 480
 481           Be aware that this will use channel B in the controller for
 482           streaming data, this must not conflict with other AC97C drivers.
 483
 484           If unsure, say N.
 485
 486           To compile this driver as a module, choose M here: the module will
 487           be called atmel-wm97xx.
 488
 489 config TOUCHSCREEN_WM97XX_MAINSTONE
 490         tristate "WM97xx Mainstone/Palm accelerated touch"
 491         depends on TOUCHSCREEN_WM97XX && ARCH_PXA
 492         help
 493           Say Y here for support for streaming mode with WM97xx touchscreens
 494           on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
 495
 496           If unsure, say N.
 497
 498           To compile this driver as a module, choose M here: the
 499           module will be called mainstone-wm97xx.
 500
 501 config TOUCHSCREEN_WM97XX_ZYLONITE
 502         tristate "Zylonite accelerated touch"
 503         depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
 504         select TOUCHSCREEN_WM9713
 505         help
 506           Say Y here for support for streaming mode with the touchscreen
 507           on Zylonite systems.
 508
 509           If unsure, say N.
 510
 511           To compile this driver as a module, choose M here: the
 512           module will be called zylonite-wm97xx.
 513
 514 config TOUCHSCREEN_USB_COMPOSITE
 515         tristate "USB Touchscreen Driver"
 516         depends on USB_ARCH_HAS_HCD
 517         select USB
 518         help
 519           USB Touchscreen driver for:
 520           - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
 521           - PanJit TouchSet USB
 522           - 3M MicroTouch USB (EX II series)
 523           - ITM
 524           - some other eTurboTouch
 525           - Gunze AHL61
 526           - DMC TSC-10/25
 527           - IRTOUCHSYSTEMS/UNITOP
 528           - IdealTEK URTC1000
 529           - GoTop Super_Q2/GogoPen/PenPower tablets
 530           - JASTEC USB Touch Controller/DigiTech DTR-02U
 531           - Zytronic controllers
 532
 533           Have a look at <http://linux.chapter7.ch/touchkit/> for
 534           a usage description and the required user-space stuff.
 535
 536           To compile this driver as a module, choose M here: the
 537           module will be called usbtouchscreen.
 538
 539 config TOUCHSCREEN_MC13783
 540         tristate "Freescale MC13783 touchscreen input driver"
 541         depends on MFD_MC13783
 542         help
 543           Say Y here if you have an Freescale MC13783 PMIC on your
 544           board and want to use its touchscreen
 545
 546           If unsure, say N.
 547
 548           To compile this driver as a module, choose M here: the
 549           module will be called mc13783_ts.
 550
 551 config TOUCHSCREEN_USB_EGALAX
 552         default y
 553         bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
 554         depends on TOUCHSCREEN_USB_COMPOSITE
 555
 556 config TOUCHSCREEN_USB_PANJIT
 557         default y
 558         bool "PanJit device support" if EXPERT
 559         depends on TOUCHSCREEN_USB_COMPOSITE
 560
 561 config TOUCHSCREEN_USB_3M
 562         default y
 563         bool "3M/Microtouch EX II series device support" if EXPERT
 564         depends on TOUCHSCREEN_USB_COMPOSITE
 565
 566 config TOUCHSCREEN_USB_ITM
 567         default y
 568         bool "ITM device support" if EXPERT
 569         depends on TOUCHSCREEN_USB_COMPOSITE
 570
 571 config TOUCHSCREEN_USB_ETURBO
 572         default y
 573         bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
 574         depends on TOUCHSCREEN_USB_COMPOSITE
 575
 576 config TOUCHSCREEN_USB_GUNZE
 577         default y
 578         bool "Gunze AHL61 device support" if EXPERT
 579         depends on TOUCHSCREEN_USB_COMPOSITE
 580
 581 config TOUCHSCREEN_USB_DMC_TSC10
 582         default y
 583         bool "DMC TSC-10/25 device support" if EXPERT
 584         depends on TOUCHSCREEN_USB_COMPOSITE
 585
 586 config TOUCHSCREEN_USB_IRTOUCH
 587         default y
 588         bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
 589         depends on TOUCHSCREEN_USB_COMPOSITE
 590
 591 config TOUCHSCREEN_USB_IDEALTEK
 592         default y
 593         bool "IdealTEK URTC1000 device support" if EXPERT
 594         depends on TOUCHSCREEN_USB_COMPOSITE
 595
 596 config TOUCHSCREEN_USB_GENERAL_TOUCH
 597         default y
 598         bool "GeneralTouch Touchscreen device support" if EXPERT
 599         depends on TOUCHSCREEN_USB_COMPOSITE
 600
 601 config TOUCHSCREEN_USB_GOTOP
 602         default y
 603         bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
 604         depends on TOUCHSCREEN_USB_COMPOSITE
 605
 606 config TOUCHSCREEN_USB_JASTEC
 607         default y
 608         bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
 609         depends on TOUCHSCREEN_USB_COMPOSITE
 610
 611 config TOUCHSCREEN_USB_E2I
 612         default y
 613         bool "e2i Touchscreen controller (e.g. from Mimo 740)"
 614         depends on TOUCHSCREEN_USB_COMPOSITE
 615
 616 config TOUCHSCREEN_USB_ZYTRONIC
 617         default y
 618         bool "Zytronic controller" if EXPERT
 619         depends on TOUCHSCREEN_USB_COMPOSITE
 620
 621 config TOUCHSCREEN_USB_ETT_TC45USB
 622         default y
 623         bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
 624         depends on TOUCHSCREEN_USB_COMPOSITE
 625
 626 config TOUCHSCREEN_USB_NEXIO
 627         default y
 628         bool "NEXIO/iNexio device support" if EXPERT
 629         depends on TOUCHSCREEN_USB_COMPOSITE
 630
 631 config TOUCHSCREEN_TOUCHIT213
 632         tristate "Sahara TouchIT-213 touchscreen"
 633         select SERIO
 634         help
 635           Say Y here if you have a Sahara TouchIT-213 Tablet PC.
 636
 637           If unsure, say N.
 638
 639           To compile this driver as a module, choose M here: the
 640           module will be called touchit213.
 641
 642 config TOUCHSCREEN_TSC2007
 643         tristate "TSC2007 based touchscreens"
 644         depends on I2C
 645         help
 646           Say Y here if you have a TSC2007 based touchscreen.
 647
 648           If unsure, say N.
 649
 650           To compile this driver as a module, choose M here: the
 651           module will be called tsc2007.
 652
 653 config TOUCHSCREEN_W90X900
 654         tristate "W90P910 touchscreen driver"
 655         depends on HAVE_CLK
 656         help
 657           Say Y here if you have a W90P910 based touchscreen.
 658
 659           To compile this driver as a module, choose M here: the
 660           module will be called w90p910_ts.
 661
 662 config TOUCHSCREEN_PCAP
 663         tristate "Motorola PCAP touchscreen"
 664         depends on EZX_PCAP
 665         help
 666           Say Y here if you have a Motorola EZX telephone and
 667           want to enable support for the built-in touchscreen.
 668
 669           To compile this driver as a module, choose M here: the
 670           module will be called pcap_ts.
 671
 672 config TOUCHSCREEN_ST1232
 673         tristate "Sitronix ST1232 touchscreen controllers"
 674         depends on I2C
 675         help
 676           Say Y here if you want to support Sitronix ST1232
 677           touchscreen controller.
 678
 679           If unsure, say N.
 680
 681           To compile this driver as a module, choose M here: the
 682           module will be called st1232_ts.
 683
 684 config TOUCHSCREEN_STMPE
 685         tristate "STMicroelectronics STMPE touchscreens"
 686         depends on MFD_STMPE
 687         help
 688           Say Y here if you want support for STMicroelectronics
 689           STMPE touchscreen controllers.
 690
 691           To compile this driver as a module, choose M here: the
 692           module will be called stmpe-ts.
 693
 694 config TOUCHSCREEN_TPS6507X
 695         tristate "TPS6507x based touchscreens"
 696         depends on I2C
 697         help
 698           Say Y here if you have a TPS6507x based touchscreen
 699           controller.
 700
 701           If unsure, say N.
 702
 703           To compile this driver as a module, choose M here: the
 704           module will be called tps6507x_ts.
 705
 706 endif