drivers/i2c/chips/Kconfig

   1 #
   2 # I2C Sensor device configuration
   3 #
   4
   5 menu "Hardware Sensors Chip support"
   6         depends on I2C
   7
   8 config I2C_SENSOR
   9         tristate
  10         default n
  11
  12 config SENSORS_ADM1021
  13         tristate "Analog Devices ADM1021 and compatibles"
  14         depends on I2C && EXPERIMENTAL
  15         select I2C_SENSOR
  16         help
  17           If you say yes here you get support for Analog Devices ADM1021
  18           and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
  19           Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
  20           and the XEON processor built-in sensor.
  21
  22           This driver can also be built as a module.  If so, the module
  23           will be called adm1021.
  24
  25 config SENSORS_ADM1025
  26         tristate "Analog Devices ADM1025 and compatibles"
  27         depends on I2C && EXPERIMENTAL
  28         select I2C_SENSOR
  29         help
  30           If you say yes here you get support for Analog Devices ADM1025
  31           and Philips NE1619 sensor chips.
  32           This driver can also be built as a module.  If so, the module
  33           will be called adm1025.
  34
  35 config SENSORS_ADM1026
  36         tristate "Analog Devices ADM1026 and compatibles"
  37         depends on I2C && EXPERIMENTAL
  38         select I2C_SENSOR
  39         help
  40           If you say yes here you get support for Analog Devices ADM1026
  41           This driver can also be built as a module.  If so, the module
  42           will be called adm1026.
  43
  44 config SENSORS_ADM1031
  45         tristate "Analog Devices ADM1031 and compatibles"
  46         depends on I2C && EXPERIMENTAL
  47         select I2C_SENSOR
  48         help
  49           If you say yes here you get support for Analog Devices ADM1031
  50           and ADM1030 sensor chips.
  51           This driver can also be built as a module.  If so, the module
  52           will be called adm1031.
  53
  54 config SENSORS_ASB100
  55         tristate "Asus ASB100 Bach"
  56         depends on I2C && EXPERIMENTAL
  57         select I2C_SENSOR
  58         help
  59           If you say yes here you get support for the ASB100 Bach sensor
  60           chip found on some Asus mainboards.
  61
  62           This driver can also be built as a module.  If so, the module
  63           will be called asb100.
  64
  65 config SENSORS_DS1621
  66         tristate "Dallas Semiconductor DS1621 and DS1625"
  67         depends on I2C && EXPERIMENTAL
  68         select I2C_SENSOR
  69         help
  70           If you say yes here you get support for Dallas Semiconductor
  71           DS1621 and DS1625 sensor chips.
  72
  73           This driver can also be built as a module.  If so, the module
  74           will be called ds1621.
  75
  76 config SENSORS_FSCHER
  77         tristate "FSC Hermes"
  78         depends on I2C && EXPERIMENTAL
  79         select I2C_SENSOR
  80         help
  81           If you say yes here you get support for Fujitsu Siemens
  82           Computers Hermes sensor chips.
  83
  84           This driver can also be built as a module.  If so, the module
  85           will be called fscher.
  86
  87 config SENSORS_FSCPOS
  88         tristate "FSC Poseidon"
  89         depends on I2C && EXPERIMENTAL
  90         select I2C_SENSOR
  91         help
  92           If you say yes here you get support for Fujitsu Siemens
  93           Computers Poseidon sensor chips.
  94
  95           This driver can also be built as a module.  If so, the module
  96           will be called fscpos.
  97
  98 config SENSORS_GL518SM
  99         tristate "Genesys Logic GL518SM"
 100         depends on I2C && EXPERIMENTAL
 101         select I2C_SENSOR
 102         help
 103           If you say yes here you get support for Genesys Logic GL518SM
 104           sensor chips.
 105
 106           This driver can also be built as a module.  If so, the module
 107           will be called gl518sm.
 108
 109 config SENSORS_GL520SM
 110         tristate "Genesys Logic GL520SM"
 111         depends on I2C && EXPERIMENTAL
 112         select I2C_SENSOR
 113         help
 114           If you say yes here you get support for Genesys Logic GL520SM
 115           sensor chips.
 116
 117           This driver can also be built as a module.  If so, the module
 118           will be called gl520sm.
 119
 120 config SENSORS_IT87
 121         tristate "ITE IT87xx and compatibles"
 122         depends on I2C && EXPERIMENTAL
 123         select I2C_SENSOR
 124         help
 125           If you say yes here you get support for ITE IT87xx sensor chips
 126           and clones: SiS960.
 127
 128           This driver can also be built as a module.  If so, the module
 129           will be called it87.
 130
 131 config SENSORS_LM63
 132         tristate "National Semiconductor LM63"
 133         depends on I2C && EXPERIMENTAL
 134         select I2C_SENSOR
 135         help
 136           If you say yes here you get support for the National Semiconductor
 137           LM63 remote diode digital temperature sensor with integrated fan
 138           control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
 139           motherboard, among others.
 140
 141           This driver can also be built as a module.  If so, the module
 142           will be called lm63.
 143
 144 config SENSORS_LM75
 145         tristate "National Semiconductor LM75 and compatibles"
 146         depends on I2C && EXPERIMENTAL
 147         select I2C_SENSOR
 148         help
 149           If you say yes here you get support for National Semiconductor LM75
 150           sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
 151           9-bit precision mode), and TelCom (now Microchip) TCN75.
 152
 153           The DS75 and DS1775 in 10- to 12-bit precision modes will require
 154           a force module parameter. The driver will not handle the extra
 155           precision anyhow.
 156
 157           This driver can also be built as a module.  If so, the module
 158           will be called lm75.
 159
 160 config SENSORS_LM77
 161         tristate "National Semiconductor LM77"
 162         depends on I2C && EXPERIMENTAL
 163         select I2C_SENSOR
 164         help
 165           If you say yes here you get support for National Semiconductor LM77
 166           sensor chips.
 167
 168           This driver can also be built as a module.  If so, the module
 169           will be called lm77.
 170
 171 config SENSORS_LM78
 172         tristate "National Semiconductor LM78 and compatibles"
 173         depends on I2C && EXPERIMENTAL
 174         select I2C_SENSOR
 175         help
 176           If you say yes here you get support for National Semiconductor LM78,
 177           LM78-J and LM79.  This can also be built as a module which can be
 178           inserted and removed while the kernel is running.
 179
 180           This driver can also be built as a module.  If so, the module
 181           will be called lm78.
 182
 183 config SENSORS_LM80
 184         tristate "National Semiconductor LM80"
 185         depends on I2C && EXPERIMENTAL
 186         select I2C_SENSOR
 187         help
 188           If you say yes here you get support for National Semiconductor
 189           LM80 sensor chips.
 190
 191           This driver can also be built as a module.  If so, the module
 192           will be called lm80.
 193
 194 config SENSORS_LM83
 195         tristate "National Semiconductor LM83"
 196         depends on I2C
 197         select I2C_SENSOR
 198         help
 199           If you say yes here you get support for National Semiconductor
 200           LM83 sensor chips.
 201
 202           This driver can also be built as a module.  If so, the module
 203           will be called lm83.
 204
 205 config SENSORS_LM85
 206         tristate "National Semiconductor LM85 and compatibles"
 207         depends on I2C && EXPERIMENTAL
 208         select I2C_SENSOR
 209         help
 210           If you say yes here you get support for National Semiconductor LM85
 211           sensor chips and clones: ADT7463 and ADM1027.
 212
 213           This driver can also be built as a module.  If so, the module
 214           will be called lm85.
 215
 216 config SENSORS_LM87
 217         tristate "National Semiconductor LM87"
 218         depends on I2C && EXPERIMENTAL
 219         select I2C_SENSOR
 220         help
 221           If you say yes here you get support for National Semiconductor LM87
 222           sensor chips.
 223
 224           This driver can also be built as a module.  If so, the module
 225           will be called lm87.
 226
 227 config SENSORS_LM90
 228         tristate "National Semiconductor LM90 and compatibles"
 229         depends on I2C
 230         select I2C_SENSOR
 231         help
 232           If you say yes here you get support for National Semiconductor LM90,
 233           LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
 234           MAX6658 sensor chips.
 235
 236           The Analog Devices ADT7461 sensor chip is also supported, but only
 237           if found in ADM1032 compatibility mode.
 238
 239           This driver can also be built as a module.  If so, the module
 240           will be called lm90.
 241
 242 config SENSORS_LM92
 243         tristate "National Semiconductor LM92 and compatibles"
 244         depends on I2C && EXPERIMENTAL
 245         select I2C_SENSOR
 246         help
 247           If you say yes here you get support for National Semiconductor LM92
 248           and Maxim MAX6635 sensor chips.
 249
 250           This driver can also be built as a module.  If so, the module
 251           will be called lm92.
 252
 253 config SENSORS_MAX1619
 254         tristate "Maxim MAX1619 sensor chip"
 255         depends on I2C && EXPERIMENTAL
 256         select I2C_SENSOR
 257         help
 258           If you say yes here you get support for MAX1619 sensor chip.
 259
 260           This driver can also be built as a module.  If so, the module
 261           will be called max1619.
 262
 263 config SENSORS_PC87360
 264         tristate "National Semiconductor PC87360 family"
 265         depends on I2C && EXPERIMENTAL
 266         select I2C_SENSOR
 267         select I2C_ISA
 268         help
 269           If you say yes here you get access to the hardware monitoring
 270           functions of the National Semiconductor PC8736x Super-I/O chips.
 271           The PC87360, PC87363 and PC87364 only have fan monitoring and
 272           control.  The PC87365 and PC87366 additionally have voltage and
 273           temperature monitoring.
 274
 275           This driver can also be built as a module.  If so, the module
 276           will be called pc87360.
 277
 278 config SENSORS_SMSC47B397
 279         tristate "SMSC LPC47B397-NC"
 280         depends on I2C && EXPERIMENTAL
 281         select I2C_SENSOR
 282         select I2C_ISA
 283         help
 284           If you say yes here you get support for the SMSC LPC47B397-NC
 285           sensor chip.
 286
 287           This driver can also be built as a module.  If so, the module
 288           will be called smsc47b397.
 289
 290 config SENSORS_SIS5595
 291         tristate "Silicon Integrated Systems Corp. SiS5595"
 292         depends on I2C && PCI && EXPERIMENTAL
 293         select I2C_SENSOR
 294         select I2C_ISA
 295         help
 296           If you say yes here you get support for the integrated sensors in
 297           SiS5595 South Bridges.
 298
 299           This driver can also be built as a module.  If so, the module
 300           will be called sis5595.
 301
 302 config SENSORS_SMSC47M1
 303         tristate "SMSC LPC47M10x and compatibles"
 304         depends on I2C && EXPERIMENTAL
 305         select I2C_SENSOR
 306         select I2C_ISA
 307         help
 308           If you say yes here you get support for the integrated fan
 309           monitoring and control capabilities of the SMSC LPC47B27x,
 310           LPC47M10x, LPC47M13x and LPC47M14x chips.
 311
 312           This driver can also be built as a module.  If so, the module
 313           will be called smsc47m1.
 314
 315 config SENSORS_VIA686A
 316         tristate "VIA686A"
 317         depends on I2C && PCI && EXPERIMENTAL
 318         select I2C_SENSOR
 319         select I2C_ISA
 320         help
 321           If you say yes here you get support for the integrated sensors in
 322           Via 686A/B South Bridges.
 323
 324           This driver can also be built as a module.  If so, the module
 325           will be called via686a.
 326
 327 config SENSORS_W83781D
 328         tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
 329         depends on I2C && EXPERIMENTAL
 330         select I2C_SENSOR
 331         help
 332           If you say yes here you get support for the Winbond W8378x series
 333           of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
 334           and the similar Asus AS99127F.
 335
 336           This driver can also be built as a module.  If so, the module
 337           will be called w83781d.
 338
 339 config SENSORS_W83L785TS
 340         tristate "Winbond W83L785TS-S"
 341         depends on I2C && EXPERIMENTAL
 342         select I2C_SENSOR
 343         help
 344           If you say yes here you get support for the Winbond W83L785TS-S
 345           sensor chip, which is used on the Asus A7N8X, among other
 346           motherboards.
 347
 348           This driver can also be built as a module.  If so, the module
 349           will be called w83l785ts.
 350
 351 config SENSORS_W83627HF
 352         tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
 353         depends on I2C && EXPERIMENTAL
 354         select I2C_SENSOR
 355         select I2C_ISA
 356         help
 357           If you say yes here you get support for the Winbond W836X7 series
 358           of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
 359
 360           This driver can also be built as a module.  If so, the module
 361           will be called w83627hf.
 362
 363 endmenu
 364
 365 menu "Other I2C Chip support"
 366         depends on I2C
 367
 368 config SENSORS_DS1337
 369         tristate "Dallas Semiconductor DS1337 Real Time Clock"
 370         depends on I2C && EXPERIMENTAL
 371         select I2C_SENSOR
 372         help
 373           If you say yes here you get support for Dallas Semiconductor
 374           DS1337 real-time clock chips.
 375
 376           This driver can also be built as a module.  If so, the module
 377           will be called ds1337.
 378
 379 config SENSORS_EEPROM
 380         tristate "EEPROM reader"
 381         depends on I2C && EXPERIMENTAL
 382         select I2C_SENSOR
 383         help
 384           If you say yes here you get read-only access to the EEPROM data
 385           available on modern memory DIMMs and Sony Vaio laptops.  Such
 386           EEPROMs could theoretically be available on other devices as well.
 387
 388           This driver can also be built as a module.  If so, the module
 389           will be called eeprom.
 390
 391 config SENSORS_PCF8574
 392         tristate "Philips PCF8574 and PCF8574A"
 393         depends on I2C && EXPERIMENTAL
 394         select I2C_SENSOR
 395         help
 396           If you say yes here you get support for Philips PCF8574 and
 397           PCF8574A chips.
 398
 399           This driver can also be built as a module.  If so, the module
 400           will be called pcf8574.
 401
 402 config SENSORS_PCF8591
 403         tristate "Philips PCF8591"
 404         depends on I2C && EXPERIMENTAL
 405         select I2C_SENSOR
 406         help
 407           If you say yes here you get support for Philips PCF8591 chips.
 408
 409           This driver can also be built as a module.  If so, the module
 410           will be called pcf8591.
 411
 412 config SENSORS_RTC8564
 413         tristate "Epson 8564 RTC chip"
 414         depends on I2C && EXPERIMENTAL
 415         select I2C_SENSOR
 416         help
 417           If you say yes here you get support for the Epson 8564 RTC chip.
 418
 419           This driver can also be built as a module.  If so, the module
 420           will be called i2c-rtc8564.
 421
 422 config ISP1301_OMAP
 423         tristate "Philips ISP1301 with OMAP OTG"
 424         depends on I2C && ARCH_OMAP_OTG
 425         help
 426           If you say yes here you get support for the Philips ISP1301
 427           USB-On-The-Go transceiver working with the OMAP OTG controller.
 428           The ISP1301 is used in products including H2 and H3 development
 429           boards for Texas Instruments OMAP processors.
 430
 431           This driver can also be built as a module.  If so, the module
 432           will be called isp1301_omap.
 433
 434 config SENSORS_M41T00
 435         tristate "ST M41T00 RTC chip"
 436         depends on I2C && PPC32
 437         help
 438           If you say yes here you get support for the ST M41T00 RTC chip.
 439
 440           This driver can also be built as a module.  If so, the module
 441           will be called m41t00.
 442
 443 endmenu