drivers/hwmon/ina2xx.c

   1 /*
   2  * Driver for Texas Instruments INA219, INA226 power monitor chips
   3  *
   4  * INA219:
   5  * Zero Drift Bi-Directional Current/Power Monitor with I2C Interface
   6  * Datasheet: http://www.ti.com/product/ina219
   7  *
   8  * INA220:
   9  * Bi-Directional Current/Power Monitor with I2C Interface
  10  * Datasheet: http://www.ti.com/product/ina220
  11  *
  12  * INA226:
  13  * Bi-Directional Current/Power Monitor with I2C Interface
  14  * Datasheet: http://www.ti.com/product/ina226
  15  *
  16  * INA230:
  17  * Bi-directional Current/Power Monitor with I2C Interface
  18  * Datasheet: http://www.ti.com/product/ina230
  19  *
  20  * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
  21  * Thanks to Jan Volkering
  22  *
  23  * This program is free software; you can redistribute it and/or modify
  24  * it under the terms of the GNU General Public License as published by
  25  * the Free Software Foundation; version 2 of the License.
  26  */
  27
  28 #include <linux/kernel.h>
  29 #include <linux/module.h>
  30 #include <linux/init.h>
  31 #include <linux/err.h>
  32 #include <linux/slab.h>
  33 #include <linux/i2c.h>
  34 #include <linux/hwmon.h>
  35 #include <linux/hwmon-sysfs.h>
  36 #include <linux/jiffies.h>
  37
  38 #include <linux/platform_data/ina2xx.h>
  39
  40 /* common register definitions */
  41 #define INA2XX_CONFIG                   0x00
  42 #define INA2XX_SHUNT_VOLTAGE            0x01 /* readonly */
  43 #define INA2XX_BUS_VOLTAGE              0x02 /* readonly */
  44 #define INA2XX_POWER                    0x03 /* readonly */
  45 #define INA2XX_CURRENT                  0x04 /* readonly */
  46 #define INA2XX_CALIBRATION              0x05
  47
  48 /* INA226 register definitions */
  49 #define INA226_MASK_ENABLE              0x06
  50 #define INA226_ALERT_LIMIT              0x07
  51 #define INA226_DIE_ID                   0xFF
  52
  53
  54 /* register count */
  55 #define INA219_REGISTERS                6
  56 #define INA226_REGISTERS                8
  57
  58 #define INA2XX_MAX_REGISTERS            8
  59
  60 /* settings - depend on use case */
  61 #define INA219_CONFIG_DEFAULT           0x399F  /* PGA=8 */
  62 #define INA226_CONFIG_DEFAULT           0x4527  /* averages=16 */
  63
  64 /* worst case is 68.10 ms (~14.6Hz, ina219) */
  65 #define INA2XX_CONVERSION_RATE          15
  66
  67 enum ina2xx_ids { ina219, ina226 };
  68
  69 struct ina2xx_config {
  70         u16 config_default;
  71         int calibration_factor;
  72         int registers;
  73         int shunt_div;
  74         int bus_voltage_shift;
  75         int bus_voltage_lsb;    /* uV */
  76         int power_lsb;          /* uW */
  77 };
  78
  79 struct ina2xx_data {
  80         struct device *hwmon_dev;
  81         const struct ina2xx_config *config;
  82
  83         struct mutex update_lock;
  84         bool valid;
  85         unsigned long last_updated;
  86
  87         int kind;
  88         u16 regs[INA2XX_MAX_REGISTERS];
  89 };
  90
  91 static const struct ina2xx_config ina2xx_config[] = {
  92         [ina219] = {
  93                 .config_default = INA219_CONFIG_DEFAULT,
  94                 .calibration_factor = 40960000,
  95                 .registers = INA219_REGISTERS,
  96                 .shunt_div = 100,
  97                 .bus_voltage_shift = 3,
  98                 .bus_voltage_lsb = 4000,
  99                 .power_lsb = 20000,
 100         },
 101         [ina226] = {
 102                 .config_default = INA226_CONFIG_DEFAULT,
 103                 .calibration_factor = 5120000,
 104                 .registers = INA226_REGISTERS,
 105                 .shunt_div = 400,
 106                 .bus_voltage_shift = 0,
 107                 .bus_voltage_lsb = 1250,
 108                 .power_lsb = 25000,
 109         },
 110 };
 111
 112 static struct ina2xx_data *ina2xx_update_device(struct device *dev)
 113 {
 114         struct i2c_client *client = to_i2c_client(dev);
 115         struct ina2xx_data *data = i2c_get_clientdata(client);
 116         struct ina2xx_data *ret = data;
 117
 118         mutex_lock(&data->update_lock);
 119
 120         if (time_after(jiffies, data->last_updated +
 121                        HZ / INA2XX_CONVERSION_RATE) || !data->valid) {
 122
 123                 int i;
 124
 125                 dev_dbg(&client->dev, "Starting ina2xx update\n");
 126
 127                 /* Read all registers */
 128                 for (i = 0; i < data->config->registers; i++) {
 129                         int rv = i2c_smbus_read_word_swapped(client, i);
 130                         if (rv < 0) {
 131                                 ret = ERR_PTR(rv);
 132                                 goto abort;
 133                         }
 134                         data->regs[i] = rv;
 135                 }
 136                 data->last_updated = jiffies;
 137                 data->valid = 1;
 138         }
 139 abort:
 140         mutex_unlock(&data->update_lock);
 141         return ret;
 142 }
 143
 144 static int ina2xx_get_value(struct ina2xx_data *data, u8 reg)
 145 {
 146         int val;
 147
 148         switch (reg) {
 149         case INA2XX_SHUNT_VOLTAGE:
 150                 val = DIV_ROUND_CLOSEST(data->regs[reg],
 151                                         data->config->shunt_div);
 152                 break;
 153         case INA2XX_BUS_VOLTAGE:
 154                 val = (data->regs[reg] >> data->config->bus_voltage_shift)
 155                   * data->config->bus_voltage_lsb;
 156                 val = DIV_ROUND_CLOSEST(val, 1000);
 157                 break;
 158         case INA2XX_POWER:
 159                 val = data->regs[reg] * data->config->power_lsb;
 160                 break;
 161         case INA2XX_CURRENT:
 162                 /* LSB=1mA (selected). Is in mA */
 163                 val = data->regs[reg];
 164                 break;
 165         default:
 166                 /* programmer goofed */
 167                 WARN_ON_ONCE(1);
 168                 val = 0;
 169                 break;
 170         }
 171
 172         return val;
 173 }
 174
 175 static ssize_t ina2xx_show_value(struct device *dev,
 176                                  struct device_attribute *da, char *buf)
 177 {
 178         struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
 179         struct ina2xx_data *data = ina2xx_update_device(dev);
 180
 181         if (IS_ERR(data))
 182                 return PTR_ERR(data);
 183
 184         return snprintf(buf, PAGE_SIZE, "%d\n",
 185                         ina2xx_get_value(data, attr->index));
 186 }
 187
 188 /* shunt voltage */
 189 static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL,
 190                           INA2XX_SHUNT_VOLTAGE);
 191
 192 /* bus voltage */
 193 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ina2xx_show_value, NULL,
 194                           INA2XX_BUS_VOLTAGE);
 195
 196 /* calculated current */
 197 static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina2xx_show_value, NULL,
 198                           INA2XX_CURRENT);
 199
 200 /* calculated power */
 201 static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
 202                           INA2XX_POWER);
 203
 204 /* pointers to created device attributes */
 205 static struct attribute *ina2xx_attributes[] = {
 206         &sensor_dev_attr_in0_input.dev_attr.attr,
 207         &sensor_dev_attr_in1_input.dev_attr.attr,
 208         &sensor_dev_attr_curr1_input.dev_attr.attr,
 209         &sensor_dev_attr_power1_input.dev_attr.attr,
 210         NULL,
 211 };
 212
 213 static const struct attribute_group ina2xx_group = {
 214         .attrs = ina2xx_attributes,
 215 };
 216
 217 static int ina2xx_probe(struct i2c_client *client,
 218                         const struct i2c_device_id *id)
 219 {
 220         struct i2c_adapter *adapter = client->adapter;
 221         struct ina2xx_data *data;
 222         struct ina2xx_platform_data *pdata;
 223         int ret;
 224         long shunt = 10000; /* default shunt value 10mOhms */
 225
 226         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
 227                 return -ENODEV;
 228
 229         data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 230         if (!data)
 231                 return -ENOMEM;
 232
 233         if (client->dev.platform_data) {
 234                 pdata =
 235                   (struct ina2xx_platform_data *)client->dev.platform_data;
 236                 shunt = pdata->shunt_uohms;
 237         }
 238
 239         if (shunt <= 0)
 240                 return -ENODEV;
 241
 242         /* set the device type */
 243         data->kind = id->driver_data;
 244         data->config = &ina2xx_config[data->kind];
 245
 246         /* device configuration */
 247         i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
 248                                      data->config->config_default);
 249         /* set current LSB to 1mA, shunt is in uOhms */
 250         /* (equation 13 in datasheet) */
 251         i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
 252                                      data->config->calibration_factor / shunt);
 253
 254         i2c_set_clientdata(client, data);
 255         mutex_init(&data->update_lock);
 256
 257         ret = sysfs_create_group(&client->dev.kobj, &ina2xx_group);
 258         if (ret)
 259                 return ret;
 260
 261         data->hwmon_dev = hwmon_device_register(&client->dev);
 262         if (IS_ERR(data->hwmon_dev)) {
 263                 ret = PTR_ERR(data->hwmon_dev);
 264                 goto out_err_hwmon;
 265         }
 266
 267         dev_info(&client->dev, "power monitor %s (Rshunt = %li uOhm)\n",
 268                  id->name, shunt);
 269
 270         return 0;
 271
 272 out_err_hwmon:
 273         sysfs_remove_group(&client->dev.kobj, &ina2xx_group);
 274         return ret;
 275 }
 276
 277 static int ina2xx_remove(struct i2c_client *client)
 278 {
 279         struct ina2xx_data *data = i2c_get_clientdata(client);
 280
 281         hwmon_device_unregister(data->hwmon_dev);
 282         sysfs_remove_group(&client->dev.kobj, &ina2xx_group);
 283
 284         return 0;
 285 }
 286
 287 static const struct i2c_device_id ina2xx_id[] = {
 288         { "ina219", ina219 },
 289         { "ina220", ina219 },
 290         { "ina226", ina226 },
 291         { "ina230", ina226 },
 292         { }
 293 };
 294 MODULE_DEVICE_TABLE(i2c, ina2xx_id);
 295
 296 static struct i2c_driver ina2xx_driver = {
 297         .driver = {
 298                 .name   = "ina2xx",
 299         },
 300         .probe          = ina2xx_probe,
 301         .remove         = ina2xx_remove,
 302         .id_table       = ina2xx_id,
 303 };
 304
 305 module_i2c_driver(ina2xx_driver);
 306
 307 MODULE_AUTHOR("Lothar Felten <l-felten@ti.com>");
 308 MODULE_DESCRIPTION("ina2xx driver");
 309 MODULE_LICENSE("GPL");