2 * Copyright © 2006-2007 Intel Corporation
3 * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
5 * Permission is hereby granted, free of charge, to any person obtaining a
6 * copy of this software and associated documentation files (the "Software"),
7 * to deal in the Software without restriction, including without limitation
8 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
9 * and/or sell copies of the Software, and to permit persons to whom the
10 * Software is furnished to do so, subject to the following conditions:
12 * The above copyright notice and this permission notice (including the next
13 * paragraph) shall be included in all copies or substantial portions of the
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
21 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
22 * DEALINGS IN THE SOFTWARE.
25 * Eric Anholt <eric@anholt.net>
26 * Dave Airlie <airlied@linux.ie>
27 * Jesse Barnes <jesse.barnes@intel.com>
30 #include <acpi/button.h>
31 #include <linux/dmi.h>
32 #include <linux/i2c.h>
33 #include <linux/slab.h>
35 #include <drm/drm_crtc.h>
36 #include <drm/drm_edid.h>
37 #include "intel_drv.h"
38 #include <drm/i915_drm.h>
40 #include <linux/acpi.h>
42 /* Private structure for the integrated LVDS support */
44 struct intel_encoder base
;
53 struct drm_display_mode
*fixed_mode
;
56 static struct intel_lvds
*to_intel_lvds(struct drm_encoder
*encoder
)
58 return container_of(encoder
, struct intel_lvds
, base
.base
);
61 static struct intel_lvds
*intel_attached_lvds(struct drm_connector
*connector
)
63 return container_of(intel_attached_encoder(connector
),
64 struct intel_lvds
, base
);
68 * Sets the power state for the panel.
70 static void intel_lvds_enable(struct intel_lvds
*intel_lvds
)
72 struct drm_device
*dev
= intel_lvds
->base
.base
.dev
;
73 struct intel_crtc
*intel_crtc
= to_intel_crtc(intel_lvds
->base
.base
.crtc
);
74 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
75 u32 ctl_reg
, lvds_reg
, stat_reg
;
77 if (HAS_PCH_SPLIT(dev
)) {
78 ctl_reg
= PCH_PP_CONTROL
;
80 stat_reg
= PCH_PP_STATUS
;
87 I915_WRITE(lvds_reg
, I915_READ(lvds_reg
) | LVDS_PORT_EN
);
89 if (intel_lvds
->pfit_dirty
) {
91 * Enable automatic panel scaling so that non-native modes
92 * fill the screen. The panel fitter should only be
93 * adjusted whilst the pipe is disabled, according to
94 * register description and PRM.
96 DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
97 intel_lvds
->pfit_control
,
98 intel_lvds
->pfit_pgm_ratios
);
100 I915_WRITE(PFIT_PGM_RATIOS
, intel_lvds
->pfit_pgm_ratios
);
101 I915_WRITE(PFIT_CONTROL
, intel_lvds
->pfit_control
);
102 intel_lvds
->pfit_dirty
= false;
105 I915_WRITE(ctl_reg
, I915_READ(ctl_reg
) | POWER_TARGET_ON
);
106 POSTING_READ(lvds_reg
);
107 if (wait_for((I915_READ(stat_reg
) & PP_ON
) != 0, 1000))
108 DRM_ERROR("timed out waiting for panel to power on\n");
110 intel_panel_enable_backlight(dev
, intel_crtc
->pipe
);
113 static void intel_lvds_disable(struct intel_lvds
*intel_lvds
)
115 struct drm_device
*dev
= intel_lvds
->base
.base
.dev
;
116 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
117 u32 ctl_reg
, lvds_reg
, stat_reg
;
119 if (HAS_PCH_SPLIT(dev
)) {
120 ctl_reg
= PCH_PP_CONTROL
;
122 stat_reg
= PCH_PP_STATUS
;
124 ctl_reg
= PP_CONTROL
;
126 stat_reg
= PP_STATUS
;
129 intel_panel_disable_backlight(dev
);
131 I915_WRITE(ctl_reg
, I915_READ(ctl_reg
) & ~POWER_TARGET_ON
);
132 if (wait_for((I915_READ(stat_reg
) & PP_ON
) == 0, 1000))
133 DRM_ERROR("timed out waiting for panel to power off\n");
135 if (intel_lvds
->pfit_control
) {
136 I915_WRITE(PFIT_CONTROL
, 0);
137 intel_lvds
->pfit_dirty
= true;
140 I915_WRITE(lvds_reg
, I915_READ(lvds_reg
) & ~LVDS_PORT_EN
);
141 POSTING_READ(lvds_reg
);
144 static void intel_lvds_dpms(struct drm_encoder
*encoder
, int mode
)
146 struct intel_lvds
*intel_lvds
= to_intel_lvds(encoder
);
148 if (mode
== DRM_MODE_DPMS_ON
)
149 intel_lvds_enable(intel_lvds
);
151 intel_lvds_disable(intel_lvds
);
153 /* XXX: We never power down the LVDS pairs. */
156 static int intel_lvds_mode_valid(struct drm_connector
*connector
,
157 struct drm_display_mode
*mode
)
159 struct intel_lvds
*intel_lvds
= intel_attached_lvds(connector
);
160 struct drm_display_mode
*fixed_mode
= intel_lvds
->fixed_mode
;
162 if (mode
->hdisplay
> fixed_mode
->hdisplay
)
164 if (mode
->vdisplay
> fixed_mode
->vdisplay
)
171 centre_horizontally(struct drm_display_mode
*mode
,
174 u32 border
, sync_pos
, blank_width
, sync_width
;
176 /* keep the hsync and hblank widths constant */
177 sync_width
= mode
->crtc_hsync_end
- mode
->crtc_hsync_start
;
178 blank_width
= mode
->crtc_hblank_end
- mode
->crtc_hblank_start
;
179 sync_pos
= (blank_width
- sync_width
+ 1) / 2;
181 border
= (mode
->hdisplay
- width
+ 1) / 2;
182 border
+= border
& 1; /* make the border even */
184 mode
->crtc_hdisplay
= width
;
185 mode
->crtc_hblank_start
= width
+ border
;
186 mode
->crtc_hblank_end
= mode
->crtc_hblank_start
+ blank_width
;
188 mode
->crtc_hsync_start
= mode
->crtc_hblank_start
+ sync_pos
;
189 mode
->crtc_hsync_end
= mode
->crtc_hsync_start
+ sync_width
;
191 mode
->private_flags
|= INTEL_MODE_CRTC_TIMINGS_SET
;
195 centre_vertically(struct drm_display_mode
*mode
,
198 u32 border
, sync_pos
, blank_width
, sync_width
;
200 /* keep the vsync and vblank widths constant */
201 sync_width
= mode
->crtc_vsync_end
- mode
->crtc_vsync_start
;
202 blank_width
= mode
->crtc_vblank_end
- mode
->crtc_vblank_start
;
203 sync_pos
= (blank_width
- sync_width
+ 1) / 2;
205 border
= (mode
->vdisplay
- height
+ 1) / 2;
207 mode
->crtc_vdisplay
= height
;
208 mode
->crtc_vblank_start
= height
+ border
;
209 mode
->crtc_vblank_end
= mode
->crtc_vblank_start
+ blank_width
;
211 mode
->crtc_vsync_start
= mode
->crtc_vblank_start
+ sync_pos
;
212 mode
->crtc_vsync_end
= mode
->crtc_vsync_start
+ sync_width
;
214 mode
->private_flags
|= INTEL_MODE_CRTC_TIMINGS_SET
;
217 static inline u32
panel_fitter_scaling(u32 source
, u32 target
)
220 * Floating point operation is not supported. So the FACTOR
221 * is defined, which can avoid the floating point computation
222 * when calculating the panel ratio.
225 #define FACTOR (1 << ACCURACY)
226 u32 ratio
= source
* FACTOR
/ target
;
227 return (FACTOR
* ratio
+ FACTOR
/2) / FACTOR
;
230 static bool intel_lvds_mode_fixup(struct drm_encoder
*encoder
,
231 const struct drm_display_mode
*mode
,
232 struct drm_display_mode
*adjusted_mode
)
234 struct drm_device
*dev
= encoder
->dev
;
235 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
236 struct intel_crtc
*intel_crtc
= to_intel_crtc(encoder
->crtc
);
237 struct intel_lvds
*intel_lvds
= to_intel_lvds(encoder
);
238 struct intel_encoder
*tmp_encoder
;
239 u32 pfit_control
= 0, pfit_pgm_ratios
= 0, border
= 0;
242 /* Should never happen!! */
243 if (INTEL_INFO(dev
)->gen
< 4 && intel_crtc
->pipe
== 0) {
244 DRM_ERROR("Can't support LVDS on pipe A\n");
248 /* Should never happen!! */
249 for_each_encoder_on_crtc(dev
, encoder
->crtc
, tmp_encoder
) {
250 if (&tmp_encoder
->base
!= encoder
) {
251 DRM_ERROR("Can't enable LVDS and another "
252 "encoder on the same pipe\n");
258 * We have timings from the BIOS for the panel, put them in
259 * to the adjusted mode. The CRTC will be set up for this mode,
260 * with the panel scaling set up to source from the H/VDisplay
261 * of the original mode.
263 intel_fixed_panel_mode(intel_lvds
->fixed_mode
, adjusted_mode
);
265 if (HAS_PCH_SPLIT(dev
)) {
266 intel_pch_panel_fitting(dev
, intel_lvds
->fitting_mode
,
267 mode
, adjusted_mode
);
271 /* Native modes don't need fitting */
272 if (adjusted_mode
->hdisplay
== mode
->hdisplay
&&
273 adjusted_mode
->vdisplay
== mode
->vdisplay
)
276 /* 965+ wants fuzzy fitting */
277 if (INTEL_INFO(dev
)->gen
>= 4)
278 pfit_control
|= ((intel_crtc
->pipe
<< PFIT_PIPE_SHIFT
) |
282 * Enable automatic panel scaling for non-native modes so that they fill
283 * the screen. Should be enabled before the pipe is enabled, according
284 * to register description and PRM.
285 * Change the value here to see the borders for debugging
288 I915_WRITE(BCLRPAT(pipe
), 0);
290 drm_mode_set_crtcinfo(adjusted_mode
, 0);
292 switch (intel_lvds
->fitting_mode
) {
293 case DRM_MODE_SCALE_CENTER
:
295 * For centered modes, we have to calculate border widths &
296 * heights and modify the values programmed into the CRTC.
298 centre_horizontally(adjusted_mode
, mode
->hdisplay
);
299 centre_vertically(adjusted_mode
, mode
->vdisplay
);
300 border
= LVDS_BORDER_ENABLE
;
303 case DRM_MODE_SCALE_ASPECT
:
304 /* Scale but preserve the aspect ratio */
305 if (INTEL_INFO(dev
)->gen
>= 4) {
306 u32 scaled_width
= adjusted_mode
->hdisplay
* mode
->vdisplay
;
307 u32 scaled_height
= mode
->hdisplay
* adjusted_mode
->vdisplay
;
309 /* 965+ is easy, it does everything in hw */
310 if (scaled_width
> scaled_height
)
311 pfit_control
|= PFIT_ENABLE
| PFIT_SCALING_PILLAR
;
312 else if (scaled_width
< scaled_height
)
313 pfit_control
|= PFIT_ENABLE
| PFIT_SCALING_LETTER
;
314 else if (adjusted_mode
->hdisplay
!= mode
->hdisplay
)
315 pfit_control
|= PFIT_ENABLE
| PFIT_SCALING_AUTO
;
317 u32 scaled_width
= adjusted_mode
->hdisplay
* mode
->vdisplay
;
318 u32 scaled_height
= mode
->hdisplay
* adjusted_mode
->vdisplay
;
320 * For earlier chips we have to calculate the scaling
321 * ratio by hand and program it into the
322 * PFIT_PGM_RATIO register
324 if (scaled_width
> scaled_height
) { /* pillar */
325 centre_horizontally(adjusted_mode
, scaled_height
/ mode
->vdisplay
);
327 border
= LVDS_BORDER_ENABLE
;
328 if (mode
->vdisplay
!= adjusted_mode
->vdisplay
) {
329 u32 bits
= panel_fitter_scaling(mode
->vdisplay
, adjusted_mode
->vdisplay
);
330 pfit_pgm_ratios
|= (bits
<< PFIT_HORIZ_SCALE_SHIFT
|
331 bits
<< PFIT_VERT_SCALE_SHIFT
);
332 pfit_control
|= (PFIT_ENABLE
|
333 VERT_INTERP_BILINEAR
|
334 HORIZ_INTERP_BILINEAR
);
336 } else if (scaled_width
< scaled_height
) { /* letter */
337 centre_vertically(adjusted_mode
, scaled_width
/ mode
->hdisplay
);
339 border
= LVDS_BORDER_ENABLE
;
340 if (mode
->hdisplay
!= adjusted_mode
->hdisplay
) {
341 u32 bits
= panel_fitter_scaling(mode
->hdisplay
, adjusted_mode
->hdisplay
);
342 pfit_pgm_ratios
|= (bits
<< PFIT_HORIZ_SCALE_SHIFT
|
343 bits
<< PFIT_VERT_SCALE_SHIFT
);
344 pfit_control
|= (PFIT_ENABLE
|
345 VERT_INTERP_BILINEAR
|
346 HORIZ_INTERP_BILINEAR
);
349 /* Aspects match, Let hw scale both directions */
350 pfit_control
|= (PFIT_ENABLE
|
351 VERT_AUTO_SCALE
| HORIZ_AUTO_SCALE
|
352 VERT_INTERP_BILINEAR
|
353 HORIZ_INTERP_BILINEAR
);
357 case DRM_MODE_SCALE_FULLSCREEN
:
359 * Full scaling, even if it changes the aspect ratio.
360 * Fortunately this is all done for us in hw.
362 if (mode
->vdisplay
!= adjusted_mode
->vdisplay
||
363 mode
->hdisplay
!= adjusted_mode
->hdisplay
) {
364 pfit_control
|= PFIT_ENABLE
;
365 if (INTEL_INFO(dev
)->gen
>= 4)
366 pfit_control
|= PFIT_SCALING_AUTO
;
368 pfit_control
|= (VERT_AUTO_SCALE
|
369 VERT_INTERP_BILINEAR
|
371 HORIZ_INTERP_BILINEAR
);
380 /* If not enabling scaling, be consistent and always use 0. */
381 if ((pfit_control
& PFIT_ENABLE
) == 0) {
386 /* Make sure pre-965 set dither correctly */
387 if (INTEL_INFO(dev
)->gen
< 4 && dev_priv
->lvds_dither
)
388 pfit_control
|= PANEL_8TO6_DITHER_ENABLE
;
390 if (pfit_control
!= intel_lvds
->pfit_control
||
391 pfit_pgm_ratios
!= intel_lvds
->pfit_pgm_ratios
) {
392 intel_lvds
->pfit_control
= pfit_control
;
393 intel_lvds
->pfit_pgm_ratios
= pfit_pgm_ratios
;
394 intel_lvds
->pfit_dirty
= true;
396 dev_priv
->lvds_border_bits
= border
;
399 * XXX: It would be nice to support lower refresh rates on the
400 * panels to reduce power consumption, and perhaps match the
401 * user's requested refresh rate.
407 static void intel_lvds_prepare(struct drm_encoder
*encoder
)
409 struct intel_lvds
*intel_lvds
= to_intel_lvds(encoder
);
411 intel_lvds_disable(intel_lvds
);
414 static void intel_lvds_commit(struct drm_encoder
*encoder
)
416 struct intel_lvds
*intel_lvds
= to_intel_lvds(encoder
);
418 /* Always do a full power on as we do not know what state
421 intel_lvds_enable(intel_lvds
);
424 static void intel_lvds_mode_set(struct drm_encoder
*encoder
,
425 struct drm_display_mode
*mode
,
426 struct drm_display_mode
*adjusted_mode
)
429 * The LVDS pin pair will already have been turned on in the
430 * intel_crtc_mode_set since it has a large impact on the DPLL
436 * Detect the LVDS connection.
438 * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
439 * connected and closed means disconnected. We also send hotplug events as
440 * needed, using lid status notification from the input layer.
442 static enum drm_connector_status
443 intel_lvds_detect(struct drm_connector
*connector
, bool force
)
445 struct drm_device
*dev
= connector
->dev
;
446 enum drm_connector_status status
;
448 status
= intel_panel_detect(dev
);
449 if (status
!= connector_status_unknown
)
452 return connector_status_connected
;
456 * Return the list of DDC modes if available, or the BIOS fixed mode otherwise.
458 static int intel_lvds_get_modes(struct drm_connector
*connector
)
460 struct intel_lvds
*intel_lvds
= intel_attached_lvds(connector
);
461 struct drm_device
*dev
= connector
->dev
;
462 struct drm_display_mode
*mode
;
464 if (intel_lvds
->edid
)
465 return drm_add_edid_modes(connector
, intel_lvds
->edid
);
467 mode
= drm_mode_duplicate(dev
, intel_lvds
->fixed_mode
);
471 drm_mode_probed_add(connector
, mode
);
475 static int intel_no_modeset_on_lid_dmi_callback(const struct dmi_system_id
*id
)
477 DRM_INFO("Skipping forced modeset for %s\n", id
->ident
);
481 /* The GPU hangs up on these systems if modeset is performed on LID open */
482 static const struct dmi_system_id intel_no_modeset_on_lid
[] = {
484 .callback
= intel_no_modeset_on_lid_dmi_callback
,
485 .ident
= "Toshiba Tecra A11",
487 DMI_MATCH(DMI_SYS_VENDOR
, "TOSHIBA"),
488 DMI_MATCH(DMI_PRODUCT_NAME
, "TECRA A11"),
492 { } /* terminating entry */
496 * Lid events. Note the use of 'modeset_on_lid':
497 * - we set it on lid close, and reset it on open
498 * - we use it as a "only once" bit (ie we ignore
499 * duplicate events where it was already properly
501 * - the suspend/resume paths will also set it to
502 * zero, since they restore the mode ("lid open").
504 static int intel_lid_notify(struct notifier_block
*nb
, unsigned long val
,
507 struct drm_i915_private
*dev_priv
=
508 container_of(nb
, struct drm_i915_private
, lid_notifier
);
509 struct drm_device
*dev
= dev_priv
->dev
;
510 struct drm_connector
*connector
= dev_priv
->int_lvds_connector
;
512 if (dev
->switch_power_state
!= DRM_SWITCH_POWER_ON
)
516 * check and update the status of LVDS connector after receiving
517 * the LID nofication event.
520 connector
->status
= connector
->funcs
->detect(connector
,
523 /* Don't force modeset on machines where it causes a GPU lockup */
524 if (dmi_check_system(intel_no_modeset_on_lid
))
526 if (!acpi_lid_open()) {
527 dev_priv
->modeset_on_lid
= 1;
531 if (!dev_priv
->modeset_on_lid
)
534 dev_priv
->modeset_on_lid
= 0;
536 mutex_lock(&dev
->mode_config
.mutex
);
537 drm_helper_resume_force_mode(dev
);
538 mutex_unlock(&dev
->mode_config
.mutex
);
544 * intel_lvds_destroy - unregister and free LVDS structures
545 * @connector: connector to free
547 * Unregister the DDC bus for this connector then free the driver private
550 static void intel_lvds_destroy(struct drm_connector
*connector
)
552 struct drm_device
*dev
= connector
->dev
;
553 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
555 intel_panel_destroy_backlight(dev
);
557 if (dev_priv
->lid_notifier
.notifier_call
)
558 acpi_lid_notifier_unregister(&dev_priv
->lid_notifier
);
559 drm_sysfs_connector_remove(connector
);
560 drm_connector_cleanup(connector
);
564 static int intel_lvds_set_property(struct drm_connector
*connector
,
565 struct drm_property
*property
,
568 struct intel_lvds
*intel_lvds
= intel_attached_lvds(connector
);
569 struct drm_device
*dev
= connector
->dev
;
571 if (property
== dev
->mode_config
.scaling_mode_property
) {
572 struct drm_crtc
*crtc
= intel_lvds
->base
.base
.crtc
;
574 if (value
== DRM_MODE_SCALE_NONE
) {
575 DRM_DEBUG_KMS("no scaling not supported\n");
579 if (intel_lvds
->fitting_mode
== value
) {
580 /* the LVDS scaling property is not changed */
583 intel_lvds
->fitting_mode
= value
;
584 if (crtc
&& crtc
->enabled
) {
586 * If the CRTC is enabled, the display will be changed
587 * according to the new panel fitting mode.
589 drm_crtc_helper_set_mode(crtc
, &crtc
->mode
,
590 crtc
->x
, crtc
->y
, crtc
->fb
);
597 static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs
= {
598 .dpms
= intel_lvds_dpms
,
599 .mode_fixup
= intel_lvds_mode_fixup
,
600 .prepare
= intel_lvds_prepare
,
601 .mode_set
= intel_lvds_mode_set
,
602 .commit
= intel_lvds_commit
,
605 static const struct drm_connector_helper_funcs intel_lvds_connector_helper_funcs
= {
606 .get_modes
= intel_lvds_get_modes
,
607 .mode_valid
= intel_lvds_mode_valid
,
608 .best_encoder
= intel_best_encoder
,
611 static const struct drm_connector_funcs intel_lvds_connector_funcs
= {
612 .dpms
= drm_helper_connector_dpms
,
613 .detect
= intel_lvds_detect
,
614 .fill_modes
= drm_helper_probe_single_connector_modes
,
615 .set_property
= intel_lvds_set_property
,
616 .destroy
= intel_lvds_destroy
,
619 static const struct drm_encoder_funcs intel_lvds_enc_funcs
= {
620 .destroy
= intel_encoder_destroy
,
623 static int __init
intel_no_lvds_dmi_callback(const struct dmi_system_id
*id
)
625 DRM_INFO("Skipping LVDS initialization for %s\n", id
->ident
);
629 /* These systems claim to have LVDS, but really don't */
630 static const struct dmi_system_id intel_no_lvds
[] = {
632 .callback
= intel_no_lvds_dmi_callback
,
633 .ident
= "Apple Mac Mini (Core series)",
635 DMI_MATCH(DMI_SYS_VENDOR
, "Apple"),
636 DMI_MATCH(DMI_PRODUCT_NAME
, "Macmini1,1"),
640 .callback
= intel_no_lvds_dmi_callback
,
641 .ident
= "Apple Mac Mini (Core 2 series)",
643 DMI_MATCH(DMI_SYS_VENDOR
, "Apple"),
644 DMI_MATCH(DMI_PRODUCT_NAME
, "Macmini2,1"),
648 .callback
= intel_no_lvds_dmi_callback
,
649 .ident
= "MSI IM-945GSE-A",
651 DMI_MATCH(DMI_SYS_VENDOR
, "MSI"),
652 DMI_MATCH(DMI_PRODUCT_NAME
, "A9830IMS"),
656 .callback
= intel_no_lvds_dmi_callback
,
657 .ident
= "Dell Studio Hybrid",
659 DMI_MATCH(DMI_SYS_VENDOR
, "Dell Inc."),
660 DMI_MATCH(DMI_PRODUCT_NAME
, "Studio Hybrid 140g"),
664 .callback
= intel_no_lvds_dmi_callback
,
665 .ident
= "Dell OptiPlex FX170",
667 DMI_MATCH(DMI_SYS_VENDOR
, "Dell Inc."),
668 DMI_MATCH(DMI_PRODUCT_NAME
, "OptiPlex FX170"),
672 .callback
= intel_no_lvds_dmi_callback
,
673 .ident
= "AOpen Mini PC",
675 DMI_MATCH(DMI_SYS_VENDOR
, "AOpen"),
676 DMI_MATCH(DMI_PRODUCT_NAME
, "i965GMx-IF"),
680 .callback
= intel_no_lvds_dmi_callback
,
681 .ident
= "AOpen Mini PC MP915",
683 DMI_MATCH(DMI_BOARD_VENDOR
, "AOpen"),
684 DMI_MATCH(DMI_BOARD_NAME
, "i915GMx-F"),
688 .callback
= intel_no_lvds_dmi_callback
,
689 .ident
= "AOpen i915GMm-HFS",
691 DMI_MATCH(DMI_BOARD_VENDOR
, "AOpen"),
692 DMI_MATCH(DMI_BOARD_NAME
, "i915GMm-HFS"),
696 .callback
= intel_no_lvds_dmi_callback
,
697 .ident
= "AOpen i45GMx-I",
699 DMI_MATCH(DMI_BOARD_VENDOR
, "AOpen"),
700 DMI_MATCH(DMI_BOARD_NAME
, "i45GMx-I"),
704 .callback
= intel_no_lvds_dmi_callback
,
705 .ident
= "Aopen i945GTt-VFA",
707 DMI_MATCH(DMI_PRODUCT_VERSION
, "AO00001JW"),
711 .callback
= intel_no_lvds_dmi_callback
,
712 .ident
= "Clientron U800",
714 DMI_MATCH(DMI_SYS_VENDOR
, "Clientron"),
715 DMI_MATCH(DMI_PRODUCT_NAME
, "U800"),
719 .callback
= intel_no_lvds_dmi_callback
,
720 .ident
= "Clientron E830",
722 DMI_MATCH(DMI_SYS_VENDOR
, "Clientron"),
723 DMI_MATCH(DMI_PRODUCT_NAME
, "E830"),
727 .callback
= intel_no_lvds_dmi_callback
,
728 .ident
= "Asus EeeBox PC EB1007",
730 DMI_MATCH(DMI_SYS_VENDOR
, "ASUSTeK Computer INC."),
731 DMI_MATCH(DMI_PRODUCT_NAME
, "EB1007"),
735 .callback
= intel_no_lvds_dmi_callback
,
736 .ident
= "Asus AT5NM10T-I",
738 DMI_MATCH(DMI_BOARD_VENDOR
, "ASUSTeK Computer INC."),
739 DMI_MATCH(DMI_BOARD_NAME
, "AT5NM10T-I"),
743 .callback
= intel_no_lvds_dmi_callback
,
744 .ident
= "Hewlett-Packard HP t5740e Thin Client",
746 DMI_MATCH(DMI_BOARD_VENDOR
, "Hewlett-Packard"),
747 DMI_MATCH(DMI_PRODUCT_NAME
, "HP t5740e Thin Client"),
751 .callback
= intel_no_lvds_dmi_callback
,
752 .ident
= "Hewlett-Packard t5745",
754 DMI_MATCH(DMI_BOARD_VENDOR
, "Hewlett-Packard"),
755 DMI_MATCH(DMI_PRODUCT_NAME
, "hp t5745"),
759 .callback
= intel_no_lvds_dmi_callback
,
760 .ident
= "Hewlett-Packard st5747",
762 DMI_MATCH(DMI_BOARD_VENDOR
, "Hewlett-Packard"),
763 DMI_MATCH(DMI_PRODUCT_NAME
, "hp st5747"),
767 .callback
= intel_no_lvds_dmi_callback
,
768 .ident
= "MSI Wind Box DC500",
770 DMI_MATCH(DMI_BOARD_VENDOR
, "MICRO-STAR INTERNATIONAL CO., LTD"),
771 DMI_MATCH(DMI_BOARD_NAME
, "MS-7469"),
775 .callback
= intel_no_lvds_dmi_callback
,
776 .ident
= "ZOTAC ZBOXSD-ID12/ID13",
778 DMI_MATCH(DMI_BOARD_VENDOR
, "ZOTAC"),
779 DMI_MATCH(DMI_BOARD_NAME
, "ZBOXSD-ID12/ID13"),
783 .callback
= intel_no_lvds_dmi_callback
,
784 .ident
= "Gigabyte GA-D525TUD",
786 DMI_MATCH(DMI_BOARD_VENDOR
, "Gigabyte Technology Co., Ltd."),
787 DMI_MATCH(DMI_BOARD_NAME
, "D525TUD"),
791 { } /* terminating entry */
795 * intel_find_lvds_downclock - find the reduced downclock for LVDS in EDID
797 * @connector: LVDS connector
799 * Find the reduced downclock for LVDS in EDID.
801 static void intel_find_lvds_downclock(struct drm_device
*dev
,
802 struct drm_display_mode
*fixed_mode
,
803 struct drm_connector
*connector
)
805 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
806 struct drm_display_mode
*scan
;
809 temp_downclock
= fixed_mode
->clock
;
810 list_for_each_entry(scan
, &connector
->probed_modes
, head
) {
812 * If one mode has the same resolution with the fixed_panel
813 * mode while they have the different refresh rate, it means
814 * that the reduced downclock is found for the LVDS. In such
815 * case we can set the different FPx0/1 to dynamically select
816 * between low and high frequency.
818 if (scan
->hdisplay
== fixed_mode
->hdisplay
&&
819 scan
->hsync_start
== fixed_mode
->hsync_start
&&
820 scan
->hsync_end
== fixed_mode
->hsync_end
&&
821 scan
->htotal
== fixed_mode
->htotal
&&
822 scan
->vdisplay
== fixed_mode
->vdisplay
&&
823 scan
->vsync_start
== fixed_mode
->vsync_start
&&
824 scan
->vsync_end
== fixed_mode
->vsync_end
&&
825 scan
->vtotal
== fixed_mode
->vtotal
) {
826 if (scan
->clock
< temp_downclock
) {
828 * The downclock is already found. But we
829 * expect to find the lower downclock.
831 temp_downclock
= scan
->clock
;
835 if (temp_downclock
< fixed_mode
->clock
&& i915_lvds_downclock
) {
836 /* We found the downclock for LVDS. */
837 dev_priv
->lvds_downclock_avail
= 1;
838 dev_priv
->lvds_downclock
= temp_downclock
;
839 DRM_DEBUG_KMS("LVDS downclock is found in EDID. "
840 "Normal clock %dKhz, downclock %dKhz\n",
841 fixed_mode
->clock
, temp_downclock
);
846 * Enumerate the child dev array parsed from VBT to check whether
847 * the LVDS is present.
848 * If it is present, return 1.
849 * If it is not present, return false.
850 * If no child dev is parsed from VBT, it assumes that the LVDS is present.
852 static bool lvds_is_present_in_vbt(struct drm_device
*dev
,
855 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
858 if (!dev_priv
->child_dev_num
)
861 for (i
= 0; i
< dev_priv
->child_dev_num
; i
++) {
862 struct child_device_config
*child
= dev_priv
->child_dev
+ i
;
864 /* If the device type is not LFP, continue.
865 * We have to check both the new identifiers as well as the
866 * old for compatibility with some BIOSes.
868 if (child
->device_type
!= DEVICE_TYPE_INT_LFP
&&
869 child
->device_type
!= DEVICE_TYPE_LFP
)
872 if (intel_gmbus_is_port_valid(child
->i2c_pin
))
873 *i2c_pin
= child
->i2c_pin
;
875 /* However, we cannot trust the BIOS writers to populate
876 * the VBT correctly. Since LVDS requires additional
877 * information from AIM blocks, a non-zero addin offset is
878 * a good indicator that the LVDS is actually present.
880 if (child
->addin_offset
)
883 /* But even then some BIOS writers perform some black magic
884 * and instantiate the device without reference to any
885 * additional data. Trust that if the VBT was written into
886 * the OpRegion then they have validated the LVDS's existence.
888 if (dev_priv
->opregion
.vbt
)
895 static bool intel_lvds_supported(struct drm_device
*dev
)
897 /* With the introduction of the PCH we gained a dedicated
898 * LVDS presence pin, use it. */
899 if (HAS_PCH_SPLIT(dev
))
902 /* Otherwise LVDS was only attached to mobile products,
903 * except for the inglorious 830gm */
904 return IS_MOBILE(dev
) && !IS_I830(dev
);
908 * intel_lvds_init - setup LVDS connectors on this device
911 * Create the connector, register the LVDS DDC bus, and try to figure out what
912 * modes we can display on the LVDS panel (if present).
914 bool intel_lvds_init(struct drm_device
*dev
)
916 struct drm_i915_private
*dev_priv
= dev
->dev_private
;
917 struct intel_lvds
*intel_lvds
;
918 struct intel_encoder
*intel_encoder
;
919 struct intel_connector
*intel_connector
;
920 struct drm_connector
*connector
;
921 struct drm_encoder
*encoder
;
922 struct drm_display_mode
*scan
; /* *modes, *bios_mode; */
923 struct drm_crtc
*crtc
;
928 if (!intel_lvds_supported(dev
))
931 /* Skip init on machines we know falsely report LVDS */
932 if (dmi_check_system(intel_no_lvds
))
935 pin
= GMBUS_PORT_PANEL
;
936 if (!lvds_is_present_in_vbt(dev
, &pin
)) {
937 DRM_DEBUG_KMS("LVDS is not present in VBT\n");
941 if (HAS_PCH_SPLIT(dev
)) {
942 if ((I915_READ(PCH_LVDS
) & LVDS_DETECTED
) == 0)
944 if (dev_priv
->edp
.support
) {
945 DRM_DEBUG_KMS("disable LVDS for eDP support\n");
950 intel_lvds
= kzalloc(sizeof(struct intel_lvds
), GFP_KERNEL
);
955 intel_connector
= kzalloc(sizeof(struct intel_connector
), GFP_KERNEL
);
956 if (!intel_connector
) {
961 if (!HAS_PCH_SPLIT(dev
)) {
962 intel_lvds
->pfit_control
= I915_READ(PFIT_CONTROL
);
965 intel_encoder
= &intel_lvds
->base
;
966 encoder
= &intel_encoder
->base
;
967 connector
= &intel_connector
->base
;
968 drm_connector_init(dev
, &intel_connector
->base
, &intel_lvds_connector_funcs
,
969 DRM_MODE_CONNECTOR_LVDS
);
971 drm_encoder_init(dev
, &intel_encoder
->base
, &intel_lvds_enc_funcs
,
972 DRM_MODE_ENCODER_LVDS
);
974 intel_connector_attach_encoder(intel_connector
, intel_encoder
);
975 intel_encoder
->type
= INTEL_OUTPUT_LVDS
;
977 intel_encoder
->clone_mask
= (1 << INTEL_LVDS_CLONE_BIT
);
978 if (HAS_PCH_SPLIT(dev
))
979 intel_encoder
->crtc_mask
= (1 << 0) | (1 << 1) | (1 << 2);
980 else if (IS_GEN4(dev
))
981 intel_encoder
->crtc_mask
= (1 << 0) | (1 << 1);
983 intel_encoder
->crtc_mask
= (1 << 1);
985 drm_encoder_helper_add(encoder
, &intel_lvds_helper_funcs
);
986 drm_connector_helper_add(connector
, &intel_lvds_connector_helper_funcs
);
987 connector
->display_info
.subpixel_order
= SubPixelHorizontalRGB
;
988 connector
->interlace_allowed
= false;
989 connector
->doublescan_allowed
= false;
991 /* create the scaling mode property */
992 drm_mode_create_scaling_mode_property(dev
);
994 * the initial panel fitting mode will be FULL_SCREEN.
997 drm_connector_attach_property(&intel_connector
->base
,
998 dev
->mode_config
.scaling_mode_property
,
999 DRM_MODE_SCALE_ASPECT
);
1000 intel_lvds
->fitting_mode
= DRM_MODE_SCALE_ASPECT
;
1003 * 1) check for EDID on DDC
1004 * 2) check for VBT data
1005 * 3) check to see if LVDS is already on
1006 * if none of the above, no panel
1007 * 4) make sure lid is open
1008 * if closed, act like it's not there for now
1012 * Attempt to get the fixed panel mode from DDC. Assume that the
1013 * preferred mode is the right one.
1015 intel_lvds
->edid
= drm_get_edid(connector
,
1016 intel_gmbus_get_adapter(dev_priv
,
1018 if (intel_lvds
->edid
) {
1019 if (drm_add_edid_modes(connector
,
1020 intel_lvds
->edid
)) {
1021 drm_mode_connector_update_edid_property(connector
,
1024 kfree(intel_lvds
->edid
);
1025 intel_lvds
->edid
= NULL
;
1028 if (!intel_lvds
->edid
) {
1029 /* Didn't get an EDID, so
1030 * Set wide sync ranges so we get all modes
1031 * handed to valid_mode for checking
1033 connector
->display_info
.min_vfreq
= 0;
1034 connector
->display_info
.max_vfreq
= 200;
1035 connector
->display_info
.min_hfreq
= 0;
1036 connector
->display_info
.max_hfreq
= 200;
1039 list_for_each_entry(scan
, &connector
->probed_modes
, head
) {
1040 if (scan
->type
& DRM_MODE_TYPE_PREFERRED
) {
1041 intel_lvds
->fixed_mode
=
1042 drm_mode_duplicate(dev
, scan
);
1043 intel_find_lvds_downclock(dev
,
1044 intel_lvds
->fixed_mode
,
1050 /* Failed to get EDID, what about VBT? */
1051 if (dev_priv
->lfp_lvds_vbt_mode
) {
1052 intel_lvds
->fixed_mode
=
1053 drm_mode_duplicate(dev
, dev_priv
->lfp_lvds_vbt_mode
);
1054 if (intel_lvds
->fixed_mode
) {
1055 intel_lvds
->fixed_mode
->type
|=
1056 DRM_MODE_TYPE_PREFERRED
;
1062 * If we didn't get EDID, try checking if the panel is already turned
1063 * on. If so, assume that whatever is currently programmed is the
1067 /* Ironlake: FIXME if still fail, not try pipe mode now */
1068 if (HAS_PCH_SPLIT(dev
))
1071 lvds
= I915_READ(LVDS
);
1072 pipe
= (lvds
& LVDS_PIPEB_SELECT
) ? 1 : 0;
1073 crtc
= intel_get_crtc_for_pipe(dev
, pipe
);
1075 if (crtc
&& (lvds
& LVDS_PORT_EN
)) {
1076 intel_lvds
->fixed_mode
= intel_crtc_mode_get(dev
, crtc
);
1077 if (intel_lvds
->fixed_mode
) {
1078 intel_lvds
->fixed_mode
->type
|=
1079 DRM_MODE_TYPE_PREFERRED
;
1084 /* If we still don't have a mode after all that, give up. */
1085 if (!intel_lvds
->fixed_mode
)
1090 * Unlock registers and just
1091 * leave them unlocked
1093 if (HAS_PCH_SPLIT(dev
)) {
1094 I915_WRITE(PCH_PP_CONTROL
,
1095 I915_READ(PCH_PP_CONTROL
) | PANEL_UNLOCK_REGS
);
1097 I915_WRITE(PP_CONTROL
,
1098 I915_READ(PP_CONTROL
) | PANEL_UNLOCK_REGS
);
1100 dev_priv
->lid_notifier
.notifier_call
= intel_lid_notify
;
1101 if (acpi_lid_notifier_register(&dev_priv
->lid_notifier
)) {
1102 DRM_DEBUG_KMS("lid notifier registration failed\n");
1103 dev_priv
->lid_notifier
.notifier_call
= NULL
;
1105 /* keep the LVDS connector */
1106 dev_priv
->int_lvds_connector
= connector
;
1107 drm_sysfs_connector_add(connector
);
1109 intel_panel_setup_backlight(dev
);
1114 DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
1115 drm_connector_cleanup(connector
);
1116 drm_encoder_cleanup(encoder
);
1118 kfree(intel_connector
);