projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / drivers / edac / i7core_edac.c
1 /* Intel i7 core/Nehalem Memory Controller kernel module
2 *
3 * This driver supports yhe memory controllers found on the Intel
4 * processor families i7core, i7core 7xx/8xx, i5core, Xeon 35xx,
5 * Xeon 55xx and Xeon 56xx also known as Nehalem, Nehalem-EP, Lynnfield
6 * and Westmere-EP.
7 *
8 * This file may be distributed under the terms of the
9 * GNU General Public License version 2 only.
10 *
11 * Copyright (c) 2009-2010 by:
12 * Mauro Carvalho Chehab <mchehab@redhat.com>
13 *
14 * Red Hat Inc. http://www.redhat.com
15 *
16 * Forked and adapted from the i5400_edac driver
17 *
18 * Based on the following public Intel datasheets:
19 * Intel Core i7 Processor Extreme Edition and Intel Core i7 Processor
20 * Datasheet, Volume 2:
21 * http://download.intel.com/design/processor/datashts/320835.pdf
22 * Intel Xeon Processor 5500 Series Datasheet Volume 2
23 * http://www.intel.com/Assets/PDF/datasheet/321322.pdf
24 * also available at:
25 * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
26 */
27
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/pci.h>
31 #include <linux/pci_ids.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34 #include <linux/edac.h>
35 #include <linux/mmzone.h>
36 #include <linux/edac_mce.h>
37 #include <linux/smp.h>
38 #include <asm/processor.h>
39
40 #include "edac_core.h"
41
42 /*
43 * This is used for Nehalem-EP and Nehalem-EX devices, where the non-core
44 * registers start at bus 255, and are not reported by BIOS.
45 * We currently find devices with only 2 sockets. In order to support more QPI
46 * Quick Path Interconnect, just increment this number.
47 */
48 #define MAX_SOCKET_BUSES 2
49
50
51 /*
52 * Alter this version for the module when modifications are made
53 */
54 #define I7CORE_REVISION " Ver: 1.0.0 " __DATE__
55 #define EDAC_MOD_STR "i7core_edac"
56
57 /*
58 * Debug macros
59 */
60 #define i7core_printk(level, fmt, arg...) \
61 edac_printk(level, "i7core", fmt, ##arg)
62
63 #define i7core_mc_printk(mci, level, fmt, arg...) \
64 edac_mc_chipset_printk(mci, level, "i7core", fmt, ##arg)
65
66 /*
67 * i7core Memory Controller Registers
68 */
69
70 /* OFFSETS for Device 0 Function 0 */
71
72 #define MC_CFG_CONTROL 0x90
73
74 /* OFFSETS for Device 3 Function 0 */
75
76 #define MC_CONTROL 0x48
77 #define MC_STATUS 0x4c
78 #define MC_MAX_DOD 0x64
79
80 /*
81 * OFFSETS for Device 3 Function 4, as inicated on Xeon 5500 datasheet:
82 * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
83 */
84
85 #define MC_TEST_ERR_RCV1 0x60
86 #define DIMM2_COR_ERR(r) ((r) & 0x7fff)
87
88 #define MC_TEST_ERR_RCV0 0x64
89 #define DIMM1_COR_ERR(r) (((r) >> 16) & 0x7fff)
90 #define DIMM0_COR_ERR(r) ((r) & 0x7fff)
91
92 /* OFFSETS for Device 3 Function 2, as inicated on Xeon 5500 datasheet */
93 #define MC_COR_ECC_CNT_0 0x80
94 #define MC_COR_ECC_CNT_1 0x84
95 #define MC_COR_ECC_CNT_2 0x88
96 #define MC_COR_ECC_CNT_3 0x8c
97 #define MC_COR_ECC_CNT_4 0x90
98 #define MC_COR_ECC_CNT_5 0x94
99
100 #define DIMM_TOP_COR_ERR(r) (((r) >> 16) & 0x7fff)
101 #define DIMM_BOT_COR_ERR(r) ((r) & 0x7fff)
102
103
104 /* OFFSETS for Devices 4,5 and 6 Function 0 */
105
106 #define MC_CHANNEL_DIMM_INIT_PARAMS 0x58
107 #define THREE_DIMMS_PRESENT (1 << 24)
108 #define SINGLE_QUAD_RANK_PRESENT (1 << 23)
109 #define QUAD_RANK_PRESENT (1 << 22)
110 #define REGISTERED_DIMM (1 << 15)
111
112 #define MC_CHANNEL_MAPPER 0x60
113 #define RDLCH(r, ch) ((((r) >> (3 + (ch * 6))) & 0x07) - 1)
114 #define WRLCH(r, ch) ((((r) >> (ch * 6)) & 0x07) - 1)
115
116 #define MC_CHANNEL_RANK_PRESENT 0x7c
117 #define RANK_PRESENT_MASK 0xffff
118
119 #define MC_CHANNEL_ADDR_MATCH 0xf0
120 #define MC_CHANNEL_ERROR_MASK 0xf8
121 #define MC_CHANNEL_ERROR_INJECT 0xfc
122 #define INJECT_ADDR_PARITY 0x10
123 #define INJECT_ECC 0x08
124 #define MASK_CACHELINE 0x06
125 #define MASK_FULL_CACHELINE 0x06
126 #define MASK_MSB32_CACHELINE 0x04
127 #define MASK_LSB32_CACHELINE 0x02
128 #define NO_MASK_CACHELINE 0x00
129 #define REPEAT_EN 0x01
130
131 /* OFFSETS for Devices 4,5 and 6 Function 1 */
132
133 #define MC_DOD_CH_DIMM0 0x48
134 #define MC_DOD_CH_DIMM1 0x4c
135 #define MC_DOD_CH_DIMM2 0x50
136 #define RANKOFFSET_MASK ((1 << 12) | (1 << 11) | (1 << 10))
137 #define RANKOFFSET(x) ((x & RANKOFFSET_MASK) >> 10)
138 #define DIMM_PRESENT_MASK (1 << 9)
139 #define DIMM_PRESENT(x) (((x) & DIMM_PRESENT_MASK) >> 9)
140 #define MC_DOD_NUMBANK_MASK ((1 << 8) | (1 << 7))
141 #define MC_DOD_NUMBANK(x) (((x) & MC_DOD_NUMBANK_MASK) >> 7)
142 #define MC_DOD_NUMRANK_MASK ((1 << 6) | (1 << 5))
143 #define MC_DOD_NUMRANK(x) (((x) & MC_DOD_NUMRANK_MASK) >> 5)
144 #define MC_DOD_NUMROW_MASK ((1 << 4) | (1 << 3) | (1 << 2))
145 #define MC_DOD_NUMROW(x) (((x) & MC_DOD_NUMROW_MASK) >> 2)
146 #define MC_DOD_NUMCOL_MASK 3
147 #define MC_DOD_NUMCOL(x) ((x) & MC_DOD_NUMCOL_MASK)
148
149 #define MC_RANK_PRESENT 0x7c
150
151 #define MC_SAG_CH_0 0x80
152 #define MC_SAG_CH_1 0x84
153 #define MC_SAG_CH_2 0x88
154 #define MC_SAG_CH_3 0x8c
155 #define MC_SAG_CH_4 0x90
156 #define MC_SAG_CH_5 0x94
157 #define MC_SAG_CH_6 0x98
158 #define MC_SAG_CH_7 0x9c
159
160 #define MC_RIR_LIMIT_CH_0 0x40
161 #define MC_RIR_LIMIT_CH_1 0x44
162 #define MC_RIR_LIMIT_CH_2 0x48
163 #define MC_RIR_LIMIT_CH_3 0x4C
164 #define MC_RIR_LIMIT_CH_4 0x50
165 #define MC_RIR_LIMIT_CH_5 0x54
166 #define MC_RIR_LIMIT_CH_6 0x58
167 #define MC_RIR_LIMIT_CH_7 0x5C
168 #define MC_RIR_LIMIT_MASK ((1 << 10) - 1)
169
170 #define MC_RIR_WAY_CH 0x80
171 #define MC_RIR_WAY_OFFSET_MASK (((1 << 14) - 1) & ~0x7)
172 #define MC_RIR_WAY_RANK_MASK 0x7
173
174 /*
175 * i7core structs
176 */
177
178 #define NUM_CHANS 3
179 #define MAX_DIMMS 3 /* Max DIMMS per channel */
180 #define MAX_MCR_FUNC 4
181 #define MAX_CHAN_FUNC 3
182
183 struct i7core_info {
184 u32 mc_control;
185 u32 mc_status;
186 u32 max_dod;
187 u32 ch_map;
188 };
189
190
191 struct i7core_inject {
192 int enable;
193
194 u32 section;
195 u32 type;
196 u32 eccmask;
197
198 /* Error address mask */
199 int channel, dimm, rank, bank, page, col;
200 };
201
202 struct i7core_channel {
203 u32 ranks;
204 u32 dimms;
205 };
206
207 struct pci_id_descr {
208 int dev;
209 int func;
210 int dev_id;
211 int optional;
212 };
213
214 struct pci_id_table {
215 struct pci_id_descr *descr;
216 int n_devs;
217 };
218
219 struct i7core_dev {
220 struct list_head list;
221 u8 socket;
222 struct pci_dev **pdev;
223 int n_devs;
224 struct mem_ctl_info *mci;
225 };
226
227 struct i7core_pvt {
228 struct pci_dev *pci_noncore;
229 struct pci_dev *pci_mcr[MAX_MCR_FUNC + 1];
230 struct pci_dev *pci_ch[NUM_CHANS][MAX_CHAN_FUNC + 1];
231
232 struct i7core_dev *i7core_dev;
233
234 struct i7core_info info;
235 struct i7core_inject inject;
236 struct i7core_channel channel[NUM_CHANS];
237
238 int channels; /* Number of active channels */
239
240 int ce_count_available;
241 int csrow_map[NUM_CHANS][MAX_DIMMS];
242
243 /* ECC corrected errors counts per udimm */
244 unsigned long udimm_ce_count[MAX_DIMMS];
245 int udimm_last_ce_count[MAX_DIMMS];
246 /* ECC corrected errors counts per rdimm */
247 unsigned long rdimm_ce_count[NUM_CHANS][MAX_DIMMS];
248 int rdimm_last_ce_count[NUM_CHANS][MAX_DIMMS];
249
250 unsigned int is_registered;
251
252 /* mcelog glue */
253 struct edac_mce edac_mce;
254
255 /* Fifo double buffers */
256 struct mce mce_entry[MCE_LOG_LEN];
257 struct mce mce_outentry[MCE_LOG_LEN];
258
259 /* Fifo in/out counters */
260 unsigned mce_in, mce_out;
261
262 /* Count indicator to show errors not got */
263 unsigned mce_overrun;
264 };
265
266 /* Static vars */
267 static LIST_HEAD(i7core_edac_list);
268 static DEFINE_MUTEX(i7core_edac_lock);
269
270 #define PCI_DESCR(device, function, device_id) \
271 .dev = (device), \
272 .func = (function), \
273 .dev_id = (device_id)
274
275 struct pci_id_descr pci_dev_descr_i7core_nehalem[] = {
276 /* Memory controller */
277 { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_I7_MCR) },
278 { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_I7_MC_TAD) },
279 /* Exists only for RDIMM */
280 { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_I7_MC_RAS), .optional = 1 },
281 { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_I7_MC_TEST) },
282
283 /* Channel 0 */
284 { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH0_CTRL) },
285 { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH0_ADDR) },
286 { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH0_RANK) },
287 { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH0_TC) },
288
289 /* Channel 1 */
290 { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH1_CTRL) },
291 { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH1_ADDR) },
292 { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH1_RANK) },
293 { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH1_TC) },
294
295 /* Channel 2 */
296 { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_I7_MC_CH2_CTRL) },
297 { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_I7_MC_CH2_ADDR) },
298 { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_I7_MC_CH2_RANK) },
299 { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_I7_MC_CH2_TC) },
300
301 /* Generic Non-core registers */
302 /*
303 * This is the PCI device on i7core and on Xeon 35xx (8086:2c41)
304 * On Xeon 55xx, however, it has a different id (8086:2c40). So,
305 * the probing code needs to test for the other address in case of
306 * failure of this one
307 */
308 { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_I7_NONCORE) },
309
310 };
311
312 struct pci_id_descr pci_dev_descr_lynnfield[] = {
313 { PCI_DESCR( 3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR) },
314 { PCI_DESCR( 3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD) },
315 { PCI_DESCR( 3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST) },
316
317 { PCI_DESCR( 4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL) },
318 { PCI_DESCR( 4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR) },
319 { PCI_DESCR( 4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK) },
320 { PCI_DESCR( 4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC) },
321
322 { PCI_DESCR( 5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL) },
323 { PCI_DESCR( 5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR) },
324 { PCI_DESCR( 5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK) },
325 { PCI_DESCR( 5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC) },
326
327 /*
328 * This is the PCI device has an alternate address on some
329 * processors like Core i7 860
330 */
331 { PCI_DESCR( 0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE) },
332 };
333
334 struct pci_id_descr pci_dev_descr_i7core_westmere[] = {
335 /* Memory controller */
336 { PCI_DESCR(3, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MCR_REV2) },
337 { PCI_DESCR(3, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TAD_REV2) },
338 /* Exists only for RDIMM */
339 { PCI_DESCR(3, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_RAS_REV2), .optional = 1 },
340 { PCI_DESCR(3, 4, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_TEST_REV2) },
341
342 /* Channel 0 */
343 { PCI_DESCR(4, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_CTRL_REV2) },
344 { PCI_DESCR(4, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_ADDR_REV2) },
345 { PCI_DESCR(4, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_RANK_REV2) },
346 { PCI_DESCR(4, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH0_TC_REV2) },
347
348 /* Channel 1 */
349 { PCI_DESCR(5, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_CTRL_REV2) },
350 { PCI_DESCR(5, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_ADDR_REV2) },
351 { PCI_DESCR(5, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_RANK_REV2) },
352 { PCI_DESCR(5, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH1_TC_REV2) },
353
354 /* Channel 2 */
355 { PCI_DESCR(6, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_CTRL_REV2) },
356 { PCI_DESCR(6, 1, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_ADDR_REV2) },
357 { PCI_DESCR(6, 2, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_RANK_REV2) },
358 { PCI_DESCR(6, 3, PCI_DEVICE_ID_INTEL_LYNNFIELD_MC_CH2_TC_REV2) },
359
360 /* Generic Non-core registers */
361 { PCI_DESCR(0, 0, PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_REV2) },
362
363 };
364
365 #define PCI_ID_TABLE_ENTRY(A) { A, ARRAY_SIZE(A) }
366 struct pci_id_table pci_dev_table[] = {
367 PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_nehalem),
368 PCI_ID_TABLE_ENTRY(pci_dev_descr_lynnfield),
369 PCI_ID_TABLE_ENTRY(pci_dev_descr_i7core_westmere),
370 };
371
372 /*
373 * pci_device_id table for which devices we are looking for
374 */
375 static const struct pci_device_id i7core_pci_tbl[] __devinitdata = {
376 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_X58_HUB_MGMT)},
377 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNNFIELD_QPI_LINK0)},
378 {0,} /* 0 terminated list. */
379 };
380
381 static struct edac_pci_ctl_info *i7core_pci;
382
383 /****************************************************************************
384 Anciliary status routines
385 ****************************************************************************/
386
387 /* MC_CONTROL bits */
388 #define CH_ACTIVE(pvt, ch) ((pvt)->info.mc_control & (1 << (8 + ch)))
389 #define ECCx8(pvt) ((pvt)->info.mc_control & (1 << 1))
390
391 /* MC_STATUS bits */
392 #define ECC_ENABLED(pvt) ((pvt)->info.mc_status & (1 << 4))
393 #define CH_DISABLED(pvt, ch) ((pvt)->info.mc_status & (1 << ch))
394
395 /* MC_MAX_DOD read functions */
396 static inline int numdimms(u32 dimms)
397 {
398 return (dimms & 0x3) + 1;
399 }
400
401 static inline int numrank(u32 rank)
402 {
403 static int ranks[4] = { 1, 2, 4, -EINVAL };
404
405 return ranks[rank & 0x3];
406 }
407
408 static inline int numbank(u32 bank)
409 {
410 static int banks[4] = { 4, 8, 16, -EINVAL };
411
412 return banks[bank & 0x3];
413 }
414
415 static inline int numrow(u32 row)
416 {
417 static int rows[8] = {
418 1 << 12, 1 << 13, 1 << 14, 1 << 15,
419 1 << 16, -EINVAL, -EINVAL, -EINVAL,
420 };
421
422 return rows[row & 0x7];
423 }
424
425 static inline int numcol(u32 col)
426 {
427 static int cols[8] = {
428 1 << 10, 1 << 11, 1 << 12, -EINVAL,
429 };
430 return cols[col & 0x3];
431 }
432
433 static struct i7core_dev *get_i7core_dev(u8 socket)
434 {
435 struct i7core_dev *i7core_dev;
436
437 list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
438 if (i7core_dev->socket == socket)
439 return i7core_dev;
440 }
441
442 return NULL;
443 }
444
445 /****************************************************************************
446 Memory check routines
447 ****************************************************************************/
448 static struct pci_dev *get_pdev_slot_func(u8 socket, unsigned slot,
449 unsigned func)
450 {
451 struct i7core_dev *i7core_dev = get_i7core_dev(socket);
452 int i;
453
454 if (!i7core_dev)
455 return NULL;
456
457 for (i = 0; i < i7core_dev->n_devs; i++) {
458 if (!i7core_dev->pdev[i])
459 continue;
460
461 if (PCI_SLOT(i7core_dev->pdev[i]->devfn) == slot &&
462 PCI_FUNC(i7core_dev->pdev[i]->devfn) == func) {
463 return i7core_dev->pdev[i];
464 }
465 }
466
467 return NULL;
468 }
469
470 /**
471 * i7core_get_active_channels() - gets the number of channels and csrows
472 * @socket: Quick Path Interconnect socket
473 * @channels: Number of channels that will be returned
474 * @csrows: Number of csrows found
475 *
476 * Since EDAC core needs to know in advance the number of available channels
477 * and csrows, in order to allocate memory for csrows/channels, it is needed
478 * to run two similar steps. At the first step, implemented on this function,
479 * it checks the number of csrows/channels present at one socket.
480 * this is used in order to properly allocate the size of mci components.
481 *
482 * It should be noticed that none of the current available datasheets explain
483 * or even mention how csrows are seen by the memory controller. So, we need
484 * to add a fake description for csrows.
485 * So, this driver is attributing one DIMM memory for one csrow.
486 */
487 static int i7core_get_active_channels(u8 socket, unsigned *channels,
488 unsigned *csrows)
489 {
490 struct pci_dev *pdev = NULL;
491 int i, j;
492 u32 status, control;
493
494 *channels = 0;
495 *csrows = 0;
496
497 pdev = get_pdev_slot_func(socket, 3, 0);
498 if (!pdev) {
499 i7core_printk(KERN_ERR, "Couldn't find socket %d fn 3.0!!!\n",
500 socket);
501 return -ENODEV;
502 }
503
504 /* Device 3 function 0 reads */
505 pci_read_config_dword(pdev, MC_STATUS, &status);
506 pci_read_config_dword(pdev, MC_CONTROL, &control);
507
508 for (i = 0; i < NUM_CHANS; i++) {
509 u32 dimm_dod[3];
510 /* Check if the channel is active */
511 if (!(control & (1 << (8 + i))))
512 continue;
513
514 /* Check if the channel is disabled */
515 if (status & (1 << i))
516 continue;
517
518 pdev = get_pdev_slot_func(socket, i + 4, 1);
519 if (!pdev) {
520 i7core_printk(KERN_ERR, "Couldn't find socket %d "
521 "fn %d.%d!!!\n",
522 socket, i + 4, 1);
523 return -ENODEV;
524 }
525 /* Devices 4-6 function 1 */
526 pci_read_config_dword(pdev,
527 MC_DOD_CH_DIMM0, &dimm_dod[0]);
528 pci_read_config_dword(pdev,
529 MC_DOD_CH_DIMM1, &dimm_dod[1]);
530 pci_read_config_dword(pdev,
531 MC_DOD_CH_DIMM2, &dimm_dod[2]);
532
533 (*channels)++;
534
535 for (j = 0; j < 3; j++) {
536 if (!DIMM_PRESENT(dimm_dod[j]))
537 continue;
538 (*csrows)++;
539 }
540 }
541
542 debugf0("Number of active channels on socket %d: %d\n",
543 socket, *channels);
544
545 return 0;
546 }
547
548 static int get_dimm_config(struct mem_ctl_info *mci, int *csrow)
549 {
550 struct i7core_pvt *pvt = mci->pvt_info;
551 struct csrow_info *csr;
552 struct pci_dev *pdev;
553 int i, j;
554 unsigned long last_page = 0;
555 enum edac_type mode;
556 enum mem_type mtype;
557
558 /* Get data from the MC register, function 0 */
559 pdev = pvt->pci_mcr[0];
560 if (!pdev)
561 return -ENODEV;
562
563 /* Device 3 function 0 reads */
564 pci_read_config_dword(pdev, MC_CONTROL, &pvt->info.mc_control);
565 pci_read_config_dword(pdev, MC_STATUS, &pvt->info.mc_status);
566 pci_read_config_dword(pdev, MC_MAX_DOD, &pvt->info.max_dod);
567 pci_read_config_dword(pdev, MC_CHANNEL_MAPPER, &pvt->info.ch_map);
568
569 debugf0("QPI %d control=0x%08x status=0x%08x dod=0x%08x map=0x%08x\n",
570 pvt->i7core_dev->socket, pvt->info.mc_control, pvt->info.mc_status,
571 pvt->info.max_dod, pvt->info.ch_map);
572
573 if (ECC_ENABLED(pvt)) {
574 debugf0("ECC enabled with x%d SDCC\n", ECCx8(pvt) ? 8 : 4);
575 if (ECCx8(pvt))
576 mode = EDAC_S8ECD8ED;
577 else
578 mode = EDAC_S4ECD4ED;
579 } else {
580 debugf0("ECC disabled\n");
581 mode = EDAC_NONE;
582 }
583
584 /* FIXME: need to handle the error codes */
585 debugf0("DOD Max limits: DIMMS: %d, %d-ranked, %d-banked "
586 "x%x x 0x%x\n",
587 numdimms(pvt->info.max_dod),
588 numrank(pvt->info.max_dod >> 2),
589 numbank(pvt->info.max_dod >> 4),
590 numrow(pvt->info.max_dod >> 6),
591 numcol(pvt->info.max_dod >> 9));
592
593 for (i = 0; i < NUM_CHANS; i++) {
594 u32 data, dimm_dod[3], value[8];
595
596 if (!pvt->pci_ch[i][0])
597 continue;
598
599 if (!CH_ACTIVE(pvt, i)) {
600 debugf0("Channel %i is not active\n", i);
601 continue;
602 }
603 if (CH_DISABLED(pvt, i)) {
604 debugf0("Channel %i is disabled\n", i);
605 continue;
606 }
607
608 /* Devices 4-6 function 0 */
609 pci_read_config_dword(pvt->pci_ch[i][0],
610 MC_CHANNEL_DIMM_INIT_PARAMS, &data);
611
612 pvt->channel[i].ranks = (data & QUAD_RANK_PRESENT) ?
613 4 : 2;
614
615 if (data & REGISTERED_DIMM)
616 mtype = MEM_RDDR3;
617 else
618 mtype = MEM_DDR3;
619 #if 0
620 if (data & THREE_DIMMS_PRESENT)
621 pvt->channel[i].dimms = 3;
622 else if (data & SINGLE_QUAD_RANK_PRESENT)
623 pvt->channel[i].dimms = 1;
624 else
625 pvt->channel[i].dimms = 2;
626 #endif
627
628 /* Devices 4-6 function 1 */
629 pci_read_config_dword(pvt->pci_ch[i][1],
630 MC_DOD_CH_DIMM0, &dimm_dod[0]);
631 pci_read_config_dword(pvt->pci_ch[i][1],
632 MC_DOD_CH_DIMM1, &dimm_dod[1]);
633 pci_read_config_dword(pvt->pci_ch[i][1],
634 MC_DOD_CH_DIMM2, &dimm_dod[2]);
635
636 debugf0("Ch%d phy rd%d, wr%d (0x%08x): "
637 "%d ranks, %cDIMMs\n",
638 i,
639 RDLCH(pvt->info.ch_map, i), WRLCH(pvt->info.ch_map, i),
640 data,
641 pvt->channel[i].ranks,
642 (data & REGISTERED_DIMM) ? 'R' : 'U');
643
644 for (j = 0; j < 3; j++) {
645 u32 banks, ranks, rows, cols;
646 u32 size, npages;
647
648 if (!DIMM_PRESENT(dimm_dod[j]))
649 continue;
650
651 banks = numbank(MC_DOD_NUMBANK(dimm_dod[j]));
652 ranks = numrank(MC_DOD_NUMRANK(dimm_dod[j]));
653 rows = numrow(MC_DOD_NUMROW(dimm_dod[j]));
654 cols = numcol(MC_DOD_NUMCOL(dimm_dod[j]));
655
656 /* DDR3 has 8 I/O banks */
657 size = (rows * cols * banks * ranks) >> (20 - 3);
658
659 pvt->channel[i].dimms++;
660
661 debugf0("\tdimm %d %d Mb offset: %x, "
662 "bank: %d, rank: %d, row: %#x, col: %#x\n",
663 j, size,
664 RANKOFFSET(dimm_dod[j]),
665 banks, ranks, rows, cols);
666
667 #if PAGE_SHIFT > 20
668 npages = size >> (PAGE_SHIFT - 20);
669 #else
670 npages = size << (20 - PAGE_SHIFT);
671 #endif
672
673 csr = &mci->csrows[*csrow];
674 csr->first_page = last_page + 1;
675 last_page += npages;
676 csr->last_page = last_page;
677 csr->nr_pages = npages;
678
679 csr->page_mask = 0;
680 csr->grain = 8;
681 csr->csrow_idx = *csrow;
682 csr->nr_channels = 1;
683
684 csr->channels[0].chan_idx = i;
685 csr->channels[0].ce_count = 0;
686
687 pvt->csrow_map[i][j] = *csrow;
688
689 switch (banks) {
690 case 4:
691 csr->dtype = DEV_X4;
692 break;
693 case 8:
694 csr->dtype = DEV_X8;
695 break;
696 case 16:
697 csr->dtype = DEV_X16;
698 break;
699 default:
700 csr->dtype = DEV_UNKNOWN;
701 }
702
703 csr->edac_mode = mode;
704 csr->mtype = mtype;
705
706 (*csrow)++;
707 }
708
709 pci_read_config_dword(pdev, MC_SAG_CH_0, &value[0]);
710 pci_read_config_dword(pdev, MC_SAG_CH_1, &value[1]);
711 pci_read_config_dword(pdev, MC_SAG_CH_2, &value[2]);
712 pci_read_config_dword(pdev, MC_SAG_CH_3, &value[3]);
713 pci_read_config_dword(pdev, MC_SAG_CH_4, &value[4]);
714 pci_read_config_dword(pdev, MC_SAG_CH_5, &value[5]);
715 pci_read_config_dword(pdev, MC_SAG_CH_6, &value[6]);
716 pci_read_config_dword(pdev, MC_SAG_CH_7, &value[7]);
717 debugf1("\t[%i] DIVBY3\tREMOVED\tOFFSET\n", i);
718 for (j = 0; j < 8; j++)
719 debugf1("\t\t%#x\t%#x\t%#x\n",
720 (value[j] >> 27) & 0x1,
721 (value[j] >> 24) & 0x7,
722 (value[j] && ((1 << 24) - 1)));
723 }
724
725 return 0;
726 }
727
728 /****************************************************************************
729 Error insertion routines
730 ****************************************************************************/
731
732 /* The i7core has independent error injection features per channel.
733 However, to have a simpler code, we don't allow enabling error injection
734 on more than one channel.
735 Also, since a change at an inject parameter will be applied only at enable,
736 we're disabling error injection on all write calls to the sysfs nodes that
737 controls the error code injection.
738 */
739 static int disable_inject(struct mem_ctl_info *mci)
740 {
741 struct i7core_pvt *pvt = mci->pvt_info;
742
743 pvt->inject.enable = 0;
744
745 if (!pvt->pci_ch[pvt->inject.channel][0])
746 return -ENODEV;
747
748 pci_write_config_dword(pvt->pci_ch[pvt->inject.channel][0],
749 MC_CHANNEL_ERROR_INJECT, 0);
750
751 return 0;
752 }
753
754 /*
755 * i7core inject inject.section
756 *
757 * accept and store error injection inject.section value
758 * bit 0 - refers to the lower 32-byte half cacheline
759 * bit 1 - refers to the upper 32-byte half cacheline
760 */
761 static ssize_t i7core_inject_section_store(struct mem_ctl_info *mci,
762 const char *data, size_t count)
763 {
764 struct i7core_pvt *pvt = mci->pvt_info;
765 unsigned long value;
766 int rc;
767
768 if (pvt->inject.enable)
769 disable_inject(mci);
770
771 rc = strict_strtoul(data, 10, &value);
772 if ((rc < 0) || (value > 3))
773 return -EIO;
774
775 pvt->inject.section = (u32) value;
776 return count;
777 }
778
779 static ssize_t i7core_inject_section_show(struct mem_ctl_info *mci,
780 char *data)
781 {
782 struct i7core_pvt *pvt = mci->pvt_info;
783 return sprintf(data, "0x%08x\n", pvt->inject.section);
784 }
785
786 /*
787 * i7core inject.type
788 *
789 * accept and store error injection inject.section value
790 * bit 0 - repeat enable - Enable error repetition
791 * bit 1 - inject ECC error
792 * bit 2 - inject parity error
793 */
794 static ssize_t i7core_inject_type_store(struct mem_ctl_info *mci,
795 const char *data, size_t count)
796 {
797 struct i7core_pvt *pvt = mci->pvt_info;
798 unsigned long value;
799 int rc;
800
801 if (pvt->inject.enable)
802 disable_inject(mci);
803
804 rc = strict_strtoul(data, 10, &value);
805 if ((rc < 0) || (value > 7))
806 return -EIO;
807
808 pvt->inject.type = (u32) value;
809 return count;
810 }
811
812 static ssize_t i7core_inject_type_show(struct mem_ctl_info *mci,
813 char *data)
814 {
815 struct i7core_pvt *pvt = mci->pvt_info;
816 return sprintf(data, "0x%08x\n", pvt->inject.type);
817 }
818
819 /*
820 * i7core_inject_inject.eccmask_store
821 *
822 * The type of error (UE/CE) will depend on the inject.eccmask value:
823 * Any bits set to a 1 will flip the corresponding ECC bit
824 * Correctable errors can be injected by flipping 1 bit or the bits within
825 * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
826 * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an
827 * uncorrectable error to be injected.
828 */
829 static ssize_t i7core_inject_eccmask_store(struct mem_ctl_info *mci,
830 const char *data, size_t count)
831 {
832 struct i7core_pvt *pvt = mci->pvt_info;
833 unsigned long value;
834 int rc;
835
836 if (pvt->inject.enable)
837 disable_inject(mci);
838
839 rc = strict_strtoul(data, 10, &value);
840 if (rc < 0)
841 return -EIO;
842
843 pvt->inject.eccmask = (u32) value;
844 return count;
845 }
846
847 static ssize_t i7core_inject_eccmask_show(struct mem_ctl_info *mci,
848 char *data)
849 {
850 struct i7core_pvt *pvt = mci->pvt_info;
851 return sprintf(data, "0x%08x\n", pvt->inject.eccmask);
852 }
853
854 /*
855 * i7core_addrmatch
856 *
857 * The type of error (UE/CE) will depend on the inject.eccmask value:
858 * Any bits set to a 1 will flip the corresponding ECC bit
859 * Correctable errors can be injected by flipping 1 bit or the bits within
860 * a symbol pair (2 consecutive aligned 8-bit pairs - i.e. 7:0 and 15:8 or
861 * 23:16 and 31:24). Flipping bits in two symbol pairs will cause an
862 * uncorrectable error to be injected.
863 */
864
865 #define DECLARE_ADDR_MATCH(param, limit) \
866 static ssize_t i7core_inject_store_##param( \
867 struct mem_ctl_info *mci, \
868 const char *data, size_t count) \
869 { \
870 struct i7core_pvt *pvt; \
871 long value; \
872 int rc; \
873 \
874 debugf1("%s()\n", __func__); \
875 pvt = mci->pvt_info; \
876 \
877 if (pvt->inject.enable) \
878 disable_inject(mci); \
879 \
880 if (!strcasecmp(data, "any") || !strcasecmp(data, "any\n"))\
881 value = -1; \
882 else { \
883 rc = strict_strtoul(data, 10, &value); \
884 if ((rc < 0) || (value >= limit)) \
885 return -EIO; \
886 } \
887 \
888 pvt->inject.param = value; \
889 \
890 return count; \
891 } \
892 \
893 static ssize_t i7core_inject_show_##param( \
894 struct mem_ctl_info *mci, \
895 char *data) \
896 { \
897 struct i7core_pvt *pvt; \
898 \
899 pvt = mci->pvt_info; \
900 debugf1("%s() pvt=%p\n", __func__, pvt); \
901 if (pvt->inject.param < 0) \
902 return sprintf(data, "any\n"); \
903 else \
904 return sprintf(data, "%d\n", pvt->inject.param);\
905 }
906
907 #define ATTR_ADDR_MATCH(param) \
908 { \
909 .attr = { \
910 .name = #param, \
911 .mode = (S_IRUGO | S_IWUSR) \
912 }, \
913 .show = i7core_inject_show_##param, \
914 .store = i7core_inject_store_##param, \
915 }
916
917 DECLARE_ADDR_MATCH(channel, 3);
918 DECLARE_ADDR_MATCH(dimm, 3);
919 DECLARE_ADDR_MATCH(rank, 4);
920 DECLARE_ADDR_MATCH(bank, 32);
921 DECLARE_ADDR_MATCH(page, 0x10000);
922 DECLARE_ADDR_MATCH(col, 0x4000);
923
924 static int write_and_test(struct pci_dev *dev, int where, u32 val)
925 {
926 u32 read;
927 int count;
928
929 debugf0("setting pci %02x:%02x.%x reg=%02x value=%08x\n",
930 dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
931 where, val);
932
933 for (count = 0; count < 10; count++) {
934 if (count)
935 msleep(100);
936 pci_write_config_dword(dev, where, val);
937 pci_read_config_dword(dev, where, &read);
938
939 if (read == val)
940 return 0;
941 }
942
943 i7core_printk(KERN_ERR, "Error during set pci %02x:%02x.%x reg=%02x "
944 "write=%08x. Read=%08x\n",
945 dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn),
946 where, val, read);
947
948 return -EINVAL;
949 }
950
951 /*
952 * This routine prepares the Memory Controller for error injection.
953 * The error will be injected when some process tries to write to the
954 * memory that matches the given criteria.
955 * The criteria can be set in terms of a mask where dimm, rank, bank, page
956 * and col can be specified.
957 * A -1 value for any of the mask items will make the MCU to ignore
958 * that matching criteria for error injection.
959 *
960 * It should be noticed that the error will only happen after a write operation
961 * on a memory that matches the condition. if REPEAT_EN is not enabled at
962 * inject mask, then it will produce just one error. Otherwise, it will repeat
963 * until the injectmask would be cleaned.
964 *
965 * FIXME: This routine assumes that MAXNUMDIMMS value of MC_MAX_DOD
966 * is reliable enough to check if the MC is using the
967 * three channels. However, this is not clear at the datasheet.
968 */
969 static ssize_t i7core_inject_enable_store(struct mem_ctl_info *mci,
970 const char *data, size_t count)
971 {
972 struct i7core_pvt *pvt = mci->pvt_info;
973 u32 injectmask;
974 u64 mask = 0;
975 int rc;
976 long enable;
977
978 if (!pvt->pci_ch[pvt->inject.channel][0])
979 return 0;
980
981 rc = strict_strtoul(data, 10, &enable);
982 if ((rc < 0))
983 return 0;
984
985 if (enable) {
986 pvt->inject.enable = 1;
987 } else {
988 disable_inject(mci);
989 return count;
990 }
991
992 /* Sets pvt->inject.dimm mask */
993 if (pvt->inject.dimm < 0)
994 mask |= 1LL << 41;
995 else {
996 if (pvt->channel[pvt->inject.channel].dimms > 2)
997 mask |= (pvt->inject.dimm & 0x3LL) << 35;
998 else
999 mask |= (pvt->inject.dimm & 0x1LL) << 36;
1000 }
1001
1002 /* Sets pvt->inject.rank mask */
1003 if (pvt->inject.rank < 0)
1004 mask |= 1LL << 40;
1005 else {
1006 if (pvt->channel[pvt->inject.channel].dimms > 2)
1007 mask |= (pvt->inject.rank & 0x1LL) << 34;
1008 else
1009 mask |= (pvt->inject.rank & 0x3LL) << 34;
1010 }
1011
1012 /* Sets pvt->inject.bank mask */
1013 if (pvt->inject.bank < 0)
1014 mask |= 1LL << 39;
1015 else
1016 mask |= (pvt->inject.bank & 0x15LL) << 30;
1017
1018 /* Sets pvt->inject.page mask */
1019 if (pvt->inject.page < 0)
1020 mask |= 1LL << 38;
1021 else
1022 mask |= (pvt->inject.page & 0xffff) << 14;
1023
1024 /* Sets pvt->inject.column mask */
1025 if (pvt->inject.col < 0)
1026 mask |= 1LL << 37;
1027 else
1028 mask |= (pvt->inject.col & 0x3fff);
1029
1030 /*
1031 * bit 0: REPEAT_EN
1032 * bits 1-2: MASK_HALF_CACHELINE
1033 * bit 3: INJECT_ECC
1034 * bit 4: INJECT_ADDR_PARITY
1035 */
1036
1037 injectmask = (pvt->inject.type & 1) |
1038 (pvt->inject.section & 0x3) << 1 |
1039 (pvt->inject.type & 0x6) << (3 - 1);
1040
1041 /* Unlock writes to registers - this register is write only */
1042 pci_write_config_dword(pvt->pci_noncore,
1043 MC_CFG_CONTROL, 0x2);
1044
1045 write_and_test(pvt->pci_ch[pvt->inject.channel][0],
1046 MC_CHANNEL_ADDR_MATCH, mask);
1047 write_and_test(pvt->pci_ch[pvt->inject.channel][0],
1048 MC_CHANNEL_ADDR_MATCH + 4, mask >> 32L);
1049
1050 write_and_test(pvt->pci_ch[pvt->inject.channel][0],
1051 MC_CHANNEL_ERROR_MASK, pvt->inject.eccmask);
1052
1053 write_and_test(pvt->pci_ch[pvt->inject.channel][0],
1054 MC_CHANNEL_ERROR_INJECT, injectmask);
1055
1056 /*
1057 * This is something undocumented, based on my tests
1058 * Without writing 8 to this register, errors aren't injected. Not sure
1059 * why.
1060 */
1061 pci_write_config_dword(pvt->pci_noncore,
1062 MC_CFG_CONTROL, 8);
1063
1064 debugf0("Error inject addr match 0x%016llx, ecc 0x%08x,"
1065 " inject 0x%08x\n",
1066 mask, pvt->inject.eccmask, injectmask);
1067
1068
1069 return count;
1070 }
1071
1072 static ssize_t i7core_inject_enable_show(struct mem_ctl_info *mci,
1073 char *data)
1074 {
1075 struct i7core_pvt *pvt = mci->pvt_info;
1076 u32 injectmask;
1077
1078 if (!pvt->pci_ch[pvt->inject.channel][0])
1079 return 0;
1080
1081 pci_read_config_dword(pvt->pci_ch[pvt->inject.channel][0],
1082 MC_CHANNEL_ERROR_INJECT, &injectmask);
1083
1084 debugf0("Inject error read: 0x%018x\n", injectmask);
1085
1086 if (injectmask & 0x0c)
1087 pvt->inject.enable = 1;
1088
1089 return sprintf(data, "%d\n", pvt->inject.enable);
1090 }
1091
1092 #define DECLARE_COUNTER(param) \
1093 static ssize_t i7core_show_counter_##param( \
1094 struct mem_ctl_info *mci, \
1095 char *data) \
1096 { \
1097 struct i7core_pvt *pvt = mci->pvt_info; \
1098 \
1099 debugf1("%s() \n", __func__); \
1100 if (!pvt->ce_count_available || (pvt->is_registered)) \
1101 return sprintf(data, "data unavailable\n"); \
1102 return sprintf(data, "%lu\n", \
1103 pvt->udimm_ce_count[param]); \
1104 }
1105
1106 #define ATTR_COUNTER(param) \
1107 { \
1108 .attr = { \
1109 .name = __stringify(udimm##param), \
1110 .mode = (S_IRUGO | S_IWUSR) \
1111 }, \
1112 .show = i7core_show_counter_##param \
1113 }
1114
1115 DECLARE_COUNTER(0);
1116 DECLARE_COUNTER(1);
1117 DECLARE_COUNTER(2);
1118
1119 /*
1120 * Sysfs struct
1121 */
1122
1123
1124 static struct mcidev_sysfs_attribute i7core_addrmatch_attrs[] = {
1125 ATTR_ADDR_MATCH(channel),
1126 ATTR_ADDR_MATCH(dimm),
1127 ATTR_ADDR_MATCH(rank),
1128 ATTR_ADDR_MATCH(bank),
1129 ATTR_ADDR_MATCH(page),
1130 ATTR_ADDR_MATCH(col),
1131 { .attr = { .name = NULL } }
1132 };
1133
1134 static struct mcidev_sysfs_group i7core_inject_addrmatch = {
1135 .name = "inject_addrmatch",
1136 .mcidev_attr = i7core_addrmatch_attrs,
1137 };
1138
1139 static struct mcidev_sysfs_attribute i7core_udimm_counters_attrs[] = {
1140 ATTR_COUNTER(0),
1141 ATTR_COUNTER(1),
1142 ATTR_COUNTER(2),
1143 };
1144
1145 static struct mcidev_sysfs_group i7core_udimm_counters = {
1146 .name = "all_channel_counts",
1147 .mcidev_attr = i7core_udimm_counters_attrs,
1148 };
1149
1150 static struct mcidev_sysfs_attribute i7core_sysfs_attrs[] = {
1151 {
1152 .attr = {
1153 .name = "inject_section",
1154 .mode = (S_IRUGO | S_IWUSR)
1155 },
1156 .show = i7core_inject_section_show,
1157 .store = i7core_inject_section_store,
1158 }, {
1159 .attr = {
1160 .name = "inject_type",
1161 .mode = (S_IRUGO | S_IWUSR)
1162 },
1163 .show = i7core_inject_type_show,
1164 .store = i7core_inject_type_store,
1165 }, {
1166 .attr = {
1167 .name = "inject_eccmask",
1168 .mode = (S_IRUGO | S_IWUSR)
1169 },
1170 .show = i7core_inject_eccmask_show,
1171 .store = i7core_inject_eccmask_store,
1172 }, {
1173 .grp = &i7core_inject_addrmatch,
1174 }, {
1175 .attr = {
1176 .name = "inject_enable",
1177 .mode = (S_IRUGO | S_IWUSR)
1178 },
1179 .show = i7core_inject_enable_show,
1180 .store = i7core_inject_enable_store,
1181 },
1182 { .attr = { .name = NULL } }, /* Reserved for udimm counters */
1183 { .attr = { .name = NULL } }
1184 };
1185
1186 /****************************************************************************
1187 Device initialization routines: put/get, init/exit
1188 ****************************************************************************/
1189
1190 /*
1191 * i7core_put_devices 'put' all the devices that we have
1192 * reserved via 'get'
1193 */
1194 static void i7core_put_devices(struct i7core_dev *i7core_dev)
1195 {
1196 int i;
1197
1198 debugf0(__FILE__ ": %s()\n", __func__);
1199 for (i = 0; i < i7core_dev->n_devs; i++) {
1200 struct pci_dev *pdev = i7core_dev->pdev[i];
1201 if (!pdev)
1202 continue;
1203 debugf0("Removing dev %02x:%02x.%d\n",
1204 pdev->bus->number,
1205 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
1206 pci_dev_put(pdev);
1207 }
1208 kfree(i7core_dev->pdev);
1209 list_del(&i7core_dev->list);
1210 kfree(i7core_dev);
1211 }
1212
1213 static void i7core_put_all_devices(void)
1214 {
1215 struct i7core_dev *i7core_dev, *tmp;
1216
1217 list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list)
1218 i7core_put_devices(i7core_dev);
1219 }
1220
1221 static void __init i7core_xeon_pci_fixup(struct pci_id_table *table)
1222 {
1223 struct pci_dev *pdev = NULL;
1224 int i;
1225 /*
1226 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core pci buses
1227 * aren't announced by acpi. So, we need to use a legacy scan probing
1228 * to detect them
1229 */
1230 while (table && table->descr) {
1231 pdev = pci_get_device(PCI_VENDOR_ID_INTEL, table->descr[0].dev_id, NULL);
1232 if (unlikely(!pdev)) {
1233 for (i = 0; i < MAX_SOCKET_BUSES; i++)
1234 pcibios_scan_specific_bus(255-i);
1235 }
1236 table++;
1237 }
1238 }
1239
1240 /*
1241 * i7core_get_devices Find and perform 'get' operation on the MCH's
1242 * device/functions we want to reference for this driver
1243 *
1244 * Need to 'get' device 16 func 1 and func 2
1245 */
1246 int i7core_get_onedevice(struct pci_dev **prev, int devno,
1247 struct pci_id_descr *dev_descr, unsigned n_devs)
1248 {
1249 struct i7core_dev *i7core_dev;
1250
1251 struct pci_dev *pdev = NULL;
1252 u8 bus = 0;
1253 u8 socket = 0;
1254
1255 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
1256 dev_descr->dev_id, *prev);
1257
1258 /*
1259 * On Xeon 55xx, the Intel Quckpath Arch Generic Non-core regs
1260 * is at addr 8086:2c40, instead of 8086:2c41. So, we need
1261 * to probe for the alternate address in case of failure
1262 */
1263 if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_I7_NONCORE && !pdev)
1264 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
1265 PCI_DEVICE_ID_INTEL_I7_NONCORE_ALT, *prev);
1266
1267 if (dev_descr->dev_id == PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE && !pdev)
1268 pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
1269 PCI_DEVICE_ID_INTEL_LYNNFIELD_NONCORE_ALT,
1270 *prev);
1271
1272 if (!pdev) {
1273 if (*prev) {
1274 *prev = pdev;
1275 return 0;
1276 }
1277
1278 if (dev_descr->optional)
1279 return 0;
1280
1281 if (devno == 0)
1282 return -ENODEV;
1283
1284 i7core_printk(KERN_ERR,
1285 "Device not found: dev %02x.%d PCI ID %04x:%04x\n",
1286 dev_descr->dev, dev_descr->func,
1287 PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
1288
1289 /* End of list, leave */
1290 return -ENODEV;
1291 }
1292 bus = pdev->bus->number;
1293
1294 if (bus == 0x3f)
1295 socket = 0;
1296 else
1297 socket = 255 - bus;
1298
1299 i7core_dev = get_i7core_dev(socket);
1300 if (!i7core_dev) {
1301 i7core_dev = kzalloc(sizeof(*i7core_dev), GFP_KERNEL);
1302 if (!i7core_dev)
1303 return -ENOMEM;
1304 i7core_dev->pdev = kzalloc(sizeof(*i7core_dev->pdev) * n_devs,
1305 GFP_KERNEL);
1306 if (!i7core_dev->pdev) {
1307 kfree(i7core_dev);
1308 return -ENOMEM;
1309 }
1310 i7core_dev->socket = socket;
1311 i7core_dev->n_devs = n_devs;
1312 list_add_tail(&i7core_dev->list, &i7core_edac_list);
1313 }
1314
1315 if (i7core_dev->pdev[devno]) {
1316 i7core_printk(KERN_ERR,
1317 "Duplicated device for "
1318 "dev %02x:%02x.%d PCI ID %04x:%04x\n",
1319 bus, dev_descr->dev, dev_descr->func,
1320 PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
1321 pci_dev_put(pdev);
1322 return -ENODEV;
1323 }
1324
1325 i7core_dev->pdev[devno] = pdev;
1326
1327 /* Sanity check */
1328 if (unlikely(PCI_SLOT(pdev->devfn) != dev_descr->dev ||
1329 PCI_FUNC(pdev->devfn) != dev_descr->func)) {
1330 i7core_printk(KERN_ERR,
1331 "Device PCI ID %04x:%04x "
1332 "has dev %02x:%02x.%d instead of dev %02x:%02x.%d\n",
1333 PCI_VENDOR_ID_INTEL, dev_descr->dev_id,
1334 bus, PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
1335 bus, dev_descr->dev, dev_descr->func);
1336 return -ENODEV;
1337 }
1338
1339 /* Be sure that the device is enabled */
1340 if (unlikely(pci_enable_device(pdev) < 0)) {
1341 i7core_printk(KERN_ERR,
1342 "Couldn't enable "
1343 "dev %02x:%02x.%d PCI ID %04x:%04x\n",
1344 bus, dev_descr->dev, dev_descr->func,
1345 PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
1346 return -ENODEV;
1347 }
1348
1349 debugf0("Detected socket %d dev %02x:%02x.%d PCI ID %04x:%04x\n",
1350 socket, bus, dev_descr->dev,
1351 dev_descr->func,
1352 PCI_VENDOR_ID_INTEL, dev_descr->dev_id);
1353
1354 *prev = pdev;
1355
1356 return 0;
1357 }
1358
1359 static int i7core_get_devices(struct pci_id_table *table)
1360 {
1361 int i, rc;
1362 struct pci_dev *pdev = NULL;
1363 struct pci_id_descr *dev_descr;
1364
1365 while (table && table->descr) {
1366 dev_descr = table->descr;
1367 for (i = 0; i < table->n_devs; i++) {
1368 pdev = NULL;
1369 do {
1370 rc = i7core_get_onedevice(&pdev, i, &dev_descr[i],
1371 table->n_devs);
1372 if (rc < 0) {
1373 if (i == 0) {
1374 i = table->n_devs;
1375 break;
1376 }
1377 i7core_put_all_devices();
1378 return -ENODEV;
1379 }
1380 } while (pdev);
1381 }
1382 table++;
1383 }
1384
1385 return 0;
1386 return 0;
1387 }
1388
1389 static int mci_bind_devs(struct mem_ctl_info *mci,
1390 struct i7core_dev *i7core_dev)
1391 {
1392 struct i7core_pvt *pvt = mci->pvt_info;
1393 struct pci_dev *pdev;
1394 int i, func, slot;
1395
1396 /* Associates i7core_dev and mci for future usage */
1397 pvt->i7core_dev = i7core_dev;
1398 i7core_dev->mci = mci;
1399
1400 pvt->is_registered = 0;
1401 for (i = 0; i < i7core_dev->n_devs; i++) {
1402 pdev = i7core_dev->pdev[i];
1403 if (!pdev)
1404 continue;
1405
1406 func = PCI_FUNC(pdev->devfn);
1407 slot = PCI_SLOT(pdev->devfn);
1408 if (slot == 3) {
1409 if (unlikely(func > MAX_MCR_FUNC))
1410 goto error;
1411 pvt->pci_mcr[func] = pdev;
1412 } else if (likely(slot >= 4 && slot < 4 + NUM_CHANS)) {
1413 if (unlikely(func > MAX_CHAN_FUNC))
1414 goto error;
1415 pvt->pci_ch[slot - 4][func] = pdev;
1416 } else if (!slot && !func)
1417 pvt->pci_noncore = pdev;
1418 else
1419 goto error;
1420
1421 debugf0("Associated fn %d.%d, dev = %p, socket %d\n",
1422 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn),
1423 pdev, i7core_dev->socket);
1424
1425 if (PCI_SLOT(pdev->devfn) == 3 &&
1426 PCI_FUNC(pdev->devfn) == 2)
1427 pvt->is_registered = 1;
1428 }
1429
1430 /*
1431 * Add extra nodes to count errors on udimm
1432 * For registered memory, this is not needed, since the counters
1433 * are already displayed at the standard locations
1434 */
1435 if (!pvt->is_registered)
1436 i7core_sysfs_attrs[ARRAY_SIZE(i7core_sysfs_attrs)-2].grp =
1437 &i7core_udimm_counters;
1438
1439 return 0;
1440
1441 error:
1442 i7core_printk(KERN_ERR, "Device %d, function %d "
1443 "is out of the expected range\n",
1444 slot, func);
1445 return -EINVAL;
1446 }
1447
1448 /****************************************************************************
1449 Error check routines
1450 ****************************************************************************/
1451 static void i7core_rdimm_update_csrow(struct mem_ctl_info *mci,
1452 int chan, int dimm, int add)
1453 {
1454 char *msg;
1455 struct i7core_pvt *pvt = mci->pvt_info;
1456 int row = pvt->csrow_map[chan][dimm], i;
1457
1458 for (i = 0; i < add; i++) {
1459 msg = kasprintf(GFP_KERNEL, "Corrected error "
1460 "(Socket=%d channel=%d dimm=%d)",
1461 pvt->i7core_dev->socket, chan, dimm);
1462
1463 edac_mc_handle_fbd_ce(mci, row, 0, msg);
1464 kfree (msg);
1465 }
1466 }
1467
1468 static void i7core_rdimm_update_ce_count(struct mem_ctl_info *mci,
1469 int chan, int new0, int new1, int new2)
1470 {
1471 struct i7core_pvt *pvt = mci->pvt_info;
1472 int add0 = 0, add1 = 0, add2 = 0;
1473 /* Updates CE counters if it is not the first time here */
1474 if (pvt->ce_count_available) {
1475 /* Updates CE counters */
1476
1477 add2 = new2 - pvt->rdimm_last_ce_count[chan][2];
1478 add1 = new1 - pvt->rdimm_last_ce_count[chan][1];
1479 add0 = new0 - pvt->rdimm_last_ce_count[chan][0];
1480
1481 if (add2 < 0)
1482 add2 += 0x7fff;
1483 pvt->rdimm_ce_count[chan][2] += add2;
1484
1485 if (add1 < 0)
1486 add1 += 0x7fff;
1487 pvt->rdimm_ce_count[chan][1] += add1;
1488
1489 if (add0 < 0)
1490 add0 += 0x7fff;
1491 pvt->rdimm_ce_count[chan][0] += add0;
1492 } else
1493 pvt->ce_count_available = 1;
1494
1495 /* Store the new values */
1496 pvt->rdimm_last_ce_count[chan][2] = new2;
1497 pvt->rdimm_last_ce_count[chan][1] = new1;
1498 pvt->rdimm_last_ce_count[chan][0] = new0;
1499
1500 /*updated the edac core */
1501 if (add0 != 0)
1502 i7core_rdimm_update_csrow(mci, chan, 0, add0);
1503 if (add1 != 0)
1504 i7core_rdimm_update_csrow(mci, chan, 1, add1);
1505 if (add2 != 0)
1506 i7core_rdimm_update_csrow(mci, chan, 2, add2);
1507
1508 }
1509
1510 static void i7core_rdimm_check_mc_ecc_err(struct mem_ctl_info *mci)
1511 {
1512 struct i7core_pvt *pvt = mci->pvt_info;
1513 u32 rcv[3][2];
1514 int i, new0, new1, new2;
1515
1516 /*Read DEV 3: FUN 2: MC_COR_ECC_CNT regs directly*/
1517 pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_0,
1518 &rcv[0][0]);
1519 pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_1,
1520 &rcv[0][1]);
1521 pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_2,
1522 &rcv[1][0]);
1523 pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_3,
1524 &rcv[1][1]);
1525 pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_4,
1526 &rcv[2][0]);
1527 pci_read_config_dword(pvt->pci_mcr[2], MC_COR_ECC_CNT_5,
1528 &rcv[2][1]);
1529 for (i = 0 ; i < 3; i++) {
1530 debugf3("MC_COR_ECC_CNT%d = 0x%x; MC_COR_ECC_CNT%d = 0x%x\n",
1531 (i * 2), rcv[i][0], (i * 2) + 1, rcv[i][1]);
1532 /*if the channel has 3 dimms*/
1533 if (pvt->channel[i].dimms > 2) {
1534 new0 = DIMM_BOT_COR_ERR(rcv[i][0]);
1535 new1 = DIMM_TOP_COR_ERR(rcv[i][0]);
1536 new2 = DIMM_BOT_COR_ERR(rcv[i][1]);
1537 } else {
1538 new0 = DIMM_TOP_COR_ERR(rcv[i][0]) +
1539 DIMM_BOT_COR_ERR(rcv[i][0]);
1540 new1 = DIMM_TOP_COR_ERR(rcv[i][1]) +
1541 DIMM_BOT_COR_ERR(rcv[i][1]);
1542 new2 = 0;
1543 }
1544
1545 i7core_rdimm_update_ce_count(mci, i, new0, new1, new2);
1546 }
1547 }
1548
1549 /* This function is based on the device 3 function 4 registers as described on:
1550 * Intel Xeon Processor 5500 Series Datasheet Volume 2
1551 * http://www.intel.com/Assets/PDF/datasheet/321322.pdf
1552 * also available at:
1553 * http://www.arrownac.com/manufacturers/intel/s/nehalem/5500-datasheet-v2.pdf
1554 */
1555 static void i7core_udimm_check_mc_ecc_err(struct mem_ctl_info *mci)
1556 {
1557 struct i7core_pvt *pvt = mci->pvt_info;
1558 u32 rcv1, rcv0;
1559 int new0, new1, new2;
1560
1561 if (!pvt->pci_mcr[4]) {
1562 debugf0("%s MCR registers not found\n", __func__);
1563 return;
1564 }
1565
1566 /* Corrected test errors */
1567 pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV1, &rcv1);
1568 pci_read_config_dword(pvt->pci_mcr[4], MC_TEST_ERR_RCV0, &rcv0);
1569
1570 /* Store the new values */
1571 new2 = DIMM2_COR_ERR(rcv1);
1572 new1 = DIMM1_COR_ERR(rcv0);
1573 new0 = DIMM0_COR_ERR(rcv0);
1574
1575 /* Updates CE counters if it is not the first time here */
1576 if (pvt->ce_count_available) {
1577 /* Updates CE counters */
1578 int add0, add1, add2;
1579
1580 add2 = new2 - pvt->udimm_last_ce_count[2];
1581 add1 = new1 - pvt->udimm_last_ce_count[1];
1582 add0 = new0 - pvt->udimm_last_ce_count[0];
1583
1584 if (add2 < 0)
1585 add2 += 0x7fff;
1586 pvt->udimm_ce_count[2] += add2;
1587
1588 if (add1 < 0)
1589 add1 += 0x7fff;
1590 pvt->udimm_ce_count[1] += add1;
1591
1592 if (add0 < 0)
1593 add0 += 0x7fff;
1594 pvt->udimm_ce_count[0] += add0;
1595
1596 if (add0 | add1 | add2)
1597 i7core_printk(KERN_ERR, "New Corrected error(s): "
1598 "dimm0: +%d, dimm1: +%d, dimm2 +%d\n",
1599 add0, add1, add2);
1600 } else
1601 pvt->ce_count_available = 1;
1602
1603 /* Store the new values */
1604 pvt->udimm_last_ce_count[2] = new2;
1605 pvt->udimm_last_ce_count[1] = new1;
1606 pvt->udimm_last_ce_count[0] = new0;
1607 }
1608
1609 /*
1610 * According with tables E-11 and E-12 of chapter E.3.3 of Intel 64 and IA-32
1611 * Architectures Software Developer’s Manual Volume 3B.
1612 * Nehalem are defined as family 0x06, model 0x1a
1613 *
1614 * The MCA registers used here are the following ones:
1615 * struct mce field MCA Register
1616 * m->status MSR_IA32_MC8_STATUS
1617 * m->addr MSR_IA32_MC8_ADDR
1618 * m->misc MSR_IA32_MC8_MISC
1619 * In the case of Nehalem, the error information is masked at .status and .misc
1620 * fields
1621 */
1622 static void i7core_mce_output_error(struct mem_ctl_info *mci,
1623 struct mce *m)
1624 {
1625 struct i7core_pvt *pvt = mci->pvt_info;
1626 char *type, *optype, *err, *msg;
1627 unsigned long error = m->status & 0x1ff0000l;
1628 u32 optypenum = (m->status >> 4) & 0x07;
1629 u32 core_err_cnt = (m->status >> 38) && 0x7fff;
1630 u32 dimm = (m->misc >> 16) & 0x3;
1631 u32 channel = (m->misc >> 18) & 0x3;
1632 u32 syndrome = m->misc >> 32;
1633 u32 errnum = find_first_bit(&error, 32);
1634 int csrow;
1635
1636 if (m->mcgstatus & 1)
1637 type = "FATAL";
1638 else
1639 type = "NON_FATAL";
1640
1641 switch (optypenum) {
1642 case 0:
1643 optype = "generic undef request";
1644 break;
1645 case 1:
1646 optype = "read error";
1647 break;
1648 case 2:
1649 optype = "write error";
1650 break;
1651 case 3:
1652 optype = "addr/cmd error";
1653 break;
1654 case 4:
1655 optype = "scrubbing error";
1656 break;
1657 default:
1658 optype = "reserved";
1659 break;
1660 }
1661
1662 switch (errnum) {
1663 case 16:
1664 err = "read ECC error";
1665 break;
1666 case 17:
1667 err = "RAS ECC error";
1668 break;
1669 case 18:
1670 err = "write parity error";
1671 break;
1672 case 19:
1673 err = "redundacy loss";
1674 break;
1675 case 20:
1676 err = "reserved";
1677 break;
1678 case 21:
1679 err = "memory range error";
1680 break;
1681 case 22:
1682 err = "RTID out of range";
1683 break;
1684 case 23:
1685 err = "address parity error";
1686 break;
1687 case 24:
1688 err = "byte enable parity error";
1689 break;
1690 default:
1691 err = "unknown";
1692 }
1693
1694 /* FIXME: should convert addr into bank and rank information */
1695 msg = kasprintf(GFP_ATOMIC,
1696 "%s (addr = 0x%08llx, cpu=%d, Dimm=%d, Channel=%d, "
1697 "syndrome=0x%08x, count=%d, Err=%08llx:%08llx (%s: %s))\n",
1698 type, (long long) m->addr, m->cpu, dimm, channel,
1699 syndrome, core_err_cnt, (long long)m->status,
1700 (long long)m->misc, optype, err);
1701
1702 debugf0("%s", msg);
1703
1704 csrow = pvt->csrow_map[channel][dimm];
1705
1706 /* Call the helper to output message */
1707 if (m->mcgstatus & 1)
1708 edac_mc_handle_fbd_ue(mci, csrow, 0,
1709 0 /* FIXME: should be channel here */, msg);
1710 else if (!pvt->is_registered)
1711 edac_mc_handle_fbd_ce(mci, csrow,
1712 0 /* FIXME: should be channel here */, msg);
1713
1714 kfree(msg);
1715 }
1716
1717 /*
1718 * i7core_check_error Retrieve and process errors reported by the
1719 * hardware. Called by the Core module.
1720 */
1721 static void i7core_check_error(struct mem_ctl_info *mci)
1722 {
1723 struct i7core_pvt *pvt = mci->pvt_info;
1724 int i;
1725 unsigned count = 0;
1726 struct mce *m;
1727
1728 /*
1729 * MCE first step: Copy all mce errors into a temporary buffer
1730 * We use a double buffering here, to reduce the risk of
1731 * loosing an error.
1732 */
1733 smp_rmb();
1734 count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
1735 % MCE_LOG_LEN;
1736 if (!count)
1737 goto check_ce_error;
1738
1739 m = pvt->mce_outentry;
1740 if (pvt->mce_in + count > MCE_LOG_LEN) {
1741 unsigned l = MCE_LOG_LEN - pvt->mce_in;
1742
1743 memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * l);
1744 smp_wmb();
1745 pvt->mce_in = 0;
1746 count -= l;
1747 m += l;
1748 }
1749 memcpy(m, &pvt->mce_entry[pvt->mce_in], sizeof(*m) * count);
1750 smp_wmb();
1751 pvt->mce_in += count;
1752
1753 smp_rmb();
1754 if (pvt->mce_overrun) {
1755 i7core_printk(KERN_ERR, "Lost %d memory errors\n",
1756 pvt->mce_overrun);
1757 smp_wmb();
1758 pvt->mce_overrun = 0;
1759 }
1760
1761 /*
1762 * MCE second step: parse errors and display
1763 */
1764 for (i = 0; i < count; i++)
1765 i7core_mce_output_error(mci, &pvt->mce_outentry[i]);
1766
1767 /*
1768 * Now, let's increment CE error counts
1769 */
1770 check_ce_error:
1771 if (!pvt->is_registered)
1772 i7core_udimm_check_mc_ecc_err(mci);
1773 else
1774 i7core_rdimm_check_mc_ecc_err(mci);
1775 }
1776
1777 /*
1778 * i7core_mce_check_error Replicates mcelog routine to get errors
1779 * This routine simply queues mcelog errors, and
1780 * return. The error itself should be handled later
1781 * by i7core_check_error.
1782 * WARNING: As this routine should be called at NMI time, extra care should
1783 * be taken to avoid deadlocks, and to be as fast as possible.
1784 */
1785 static int i7core_mce_check_error(void *priv, struct mce *mce)
1786 {
1787 struct mem_ctl_info *mci = priv;
1788 struct i7core_pvt *pvt = mci->pvt_info;
1789
1790 /*
1791 * Just let mcelog handle it if the error is
1792 * outside the memory controller
1793 */
1794 if (((mce->status & 0xffff) >> 7) != 1)
1795 return 0;
1796
1797 /* Bank 8 registers are the only ones that we know how to handle */
1798 if (mce->bank != 8)
1799 return 0;
1800
1801 #ifdef CONFIG_SMP
1802 /* Only handle if it is the right mc controller */
1803 if (cpu_data(mce->cpu).phys_proc_id != pvt->i7core_dev->socket)
1804 return 0;
1805 #endif
1806
1807 smp_rmb();
1808 if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
1809 smp_wmb();
1810 pvt->mce_overrun++;
1811 return 0;
1812 }
1813
1814 /* Copy memory error at the ringbuffer */
1815 memcpy(&pvt->mce_entry[pvt->mce_out], mce, sizeof(*mce));
1816 smp_wmb();
1817 pvt->mce_out = (pvt->mce_out + 1) % MCE_LOG_LEN;
1818
1819 /* Handle fatal errors immediately */
1820 if (mce->mcgstatus & 1)
1821 i7core_check_error(mci);
1822
1823 /* Advice mcelog that the error were handled */
1824 return 1;
1825 }
1826
1827 static int i7core_register_mci(struct i7core_dev *i7core_dev,
1828 int num_channels, int num_csrows)
1829 {
1830 struct mem_ctl_info *mci;
1831 struct i7core_pvt *pvt;
1832 int csrow = 0;
1833 int rc;
1834
1835 /* allocate a new MC control structure */
1836 mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels,
1837 i7core_dev->socket);
1838 if (unlikely(!mci))
1839 return -ENOMEM;
1840
1841 debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
1842
1843 /* record ptr to the generic device */
1844 mci->dev = &i7core_dev->pdev[0]->dev;
1845
1846 pvt = mci->pvt_info;
1847 memset(pvt, 0, sizeof(*pvt));
1848
1849 /*
1850 * FIXME: how to handle RDDR3 at MCI level? It is possible to have
1851 * Mixed RDDR3/UDDR3 with Nehalem, provided that they are on different
1852 * memory channels
1853 */
1854 mci->mtype_cap = MEM_FLAG_DDR3;
1855 mci->edac_ctl_cap = EDAC_FLAG_NONE;
1856 mci->edac_cap = EDAC_FLAG_NONE;
1857 mci->mod_name = "i7core_edac.c";
1858 mci->mod_ver = I7CORE_REVISION;
1859 mci->ctl_name = kasprintf(GFP_KERNEL, "i7 core #%d",
1860 i7core_dev->socket);
1861 mci->dev_name = pci_name(i7core_dev->pdev[0]);
1862 mci->ctl_page_to_phys = NULL;
1863 mci->mc_driver_sysfs_attributes = i7core_sysfs_attrs;
1864 /* Set the function pointer to an actual operation function */
1865 mci->edac_check = i7core_check_error;
1866
1867 /* Store pci devices at mci for faster access */
1868 rc = mci_bind_devs(mci, i7core_dev);
1869 if (unlikely(rc < 0))
1870 goto fail;
1871
1872 /* Get dimm basic config */
1873 get_dimm_config(mci, &csrow);
1874
1875 /* add this new MC control structure to EDAC's list of MCs */
1876 if (unlikely(edac_mc_add_mc(mci))) {
1877 debugf0("MC: " __FILE__
1878 ": %s(): failed edac_mc_add_mc()\n", __func__);
1879 /* FIXME: perhaps some code should go here that disables error
1880 * reporting if we just enabled it
1881 */
1882
1883 rc = -EINVAL;
1884 goto fail;
1885 }
1886
1887 /* allocating generic PCI control info */
1888 i7core_pci = edac_pci_create_generic_ctl(&i7core_dev->pdev[0]->dev,
1889 EDAC_MOD_STR);
1890 if (unlikely(!i7core_pci)) {
1891 printk(KERN_WARNING
1892 "%s(): Unable to create PCI control\n",
1893 __func__);
1894 printk(KERN_WARNING
1895 "%s(): PCI error report via EDAC not setup\n",
1896 __func__);
1897 }
1898
1899 /* Default error mask is any memory */
1900 pvt->inject.channel = 0;
1901 pvt->inject.dimm = -1;
1902 pvt->inject.rank = -1;
1903 pvt->inject.bank = -1;
1904 pvt->inject.page = -1;
1905 pvt->inject.col = -1;
1906
1907 /* Registers on edac_mce in order to receive memory errors */
1908 pvt->edac_mce.priv = mci;
1909 pvt->edac_mce.check_error = i7core_mce_check_error;
1910
1911 rc = edac_mce_register(&pvt->edac_mce);
1912 if (unlikely(rc < 0)) {
1913 debugf0("MC: " __FILE__
1914 ": %s(): failed edac_mce_register()\n", __func__);
1915 }
1916
1917 fail:
1918 if (rc < 0)
1919 edac_mc_free(mci);
1920 return rc;
1921 }
1922
1923 /*
1924 * i7core_probe Probe for ONE instance of device to see if it is
1925 * present.
1926 * return:
1927 * 0 for FOUND a device
1928 * < 0 for error code
1929 */
1930 static int __devinit i7core_probe(struct pci_dev *pdev,
1931 const struct pci_device_id *id)
1932 {
1933 int dev_idx = id->driver_data;
1934 int rc;
1935 struct i7core_dev *i7core_dev;
1936
1937 /*
1938 * All memory controllers are allocated at the first pass.
1939 */
1940 if (unlikely(dev_idx >= 1))
1941 return -EINVAL;
1942
1943 /* get the pci devices we want to reserve for our use */
1944 mutex_lock(&i7core_edac_lock);
1945
1946 rc = i7core_get_devices(pci_dev_table);
1947 if (unlikely(rc < 0))
1948 goto fail0;
1949
1950 list_for_each_entry(i7core_dev, &i7core_edac_list, list) {
1951 int channels;
1952 int csrows;
1953
1954 /* Check the number of active and not disabled channels */
1955 rc = i7core_get_active_channels(i7core_dev->socket,
1956 &channels, &csrows);
1957 if (unlikely(rc < 0))
1958 goto fail1;
1959
1960 rc = i7core_register_mci(i7core_dev, channels, csrows);
1961 if (unlikely(rc < 0))
1962 goto fail1;
1963 }
1964
1965 i7core_printk(KERN_INFO, "Driver loaded.\n");
1966
1967 mutex_unlock(&i7core_edac_lock);
1968 return 0;
1969
1970 fail1:
1971 i7core_put_all_devices();
1972 fail0:
1973 mutex_unlock(&i7core_edac_lock);
1974 return rc;
1975 }
1976
1977 /*
1978 * i7core_remove destructor for one instance of device
1979 *
1980 */
1981 static void __devexit i7core_remove(struct pci_dev *pdev)
1982 {
1983 struct mem_ctl_info *mci;
1984 struct i7core_dev *i7core_dev, *tmp;
1985
1986 debugf0(__FILE__ ": %s()\n", __func__);
1987
1988 if (i7core_pci)
1989 edac_pci_release_generic_ctl(i7core_pci);
1990
1991 /*
1992 * we have a trouble here: pdev value for removal will be wrong, since
1993 * it will point to the X58 register used to detect that the machine
1994 * is a Nehalem or upper design. However, due to the way several PCI
1995 * devices are grouped together to provide MC functionality, we need
1996 * to use a different method for releasing the devices
1997 */
1998
1999 mutex_lock(&i7core_edac_lock);
2000 list_for_each_entry_safe(i7core_dev, tmp, &i7core_edac_list, list) {
2001 mci = edac_mc_del_mc(&i7core_dev->pdev[0]->dev);
2002 if (mci) {
2003 struct i7core_pvt *pvt = mci->pvt_info;
2004
2005 i7core_dev = pvt->i7core_dev;
2006 edac_mce_unregister(&pvt->edac_mce);
2007 kfree(mci->ctl_name);
2008 edac_mc_free(mci);
2009 i7core_put_devices(i7core_dev);
2010 } else {
2011 i7core_printk(KERN_ERR,
2012 "Couldn't find mci for socket %d\n",
2013 i7core_dev->socket);
2014 }
2015 }
2016 mutex_unlock(&i7core_edac_lock);
2017 }
2018
2019 MODULE_DEVICE_TABLE(pci, i7core_pci_tbl);
2020
2021 /*
2022 * i7core_driver pci_driver structure for this module
2023 *
2024 */
2025 static struct pci_driver i7core_driver = {
2026 .name = "i7core_edac",
2027 .probe = i7core_probe,
2028 .remove = __devexit_p(i7core_remove),
2029 .id_table = i7core_pci_tbl,
2030 };
2031
2032 /*
2033 * i7core_init Module entry function
2034 * Try to initialize this module for its devices
2035 */
2036 static int __init i7core_init(void)
2037 {
2038 int pci_rc;
2039
2040 debugf2("MC: " __FILE__ ": %s()\n", __func__);
2041
2042 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
2043 opstate_init();
2044
2045 i7core_xeon_pci_fixup(pci_dev_table);
2046
2047 pci_rc = pci_register_driver(&i7core_driver);
2048
2049 if (pci_rc >= 0)
2050 return 0;
2051
2052 i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
2053 pci_rc);
2054
2055 return pci_rc;
2056 }
2057
2058 /*
2059 * i7core_exit() Module exit function
2060 * Unregister the driver
2061 */
2062 static void __exit i7core_exit(void)
2063 {
2064 debugf2("MC: " __FILE__ ": %s()\n", __func__);
2065 pci_unregister_driver(&i7core_driver);
2066 }
2067
2068 module_init(i7core_init);
2069 module_exit(i7core_exit);
2070
2071 MODULE_LICENSE("GPL");
2072 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
2073 MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
2074 MODULE_DESCRIPTION("MC Driver for Intel i7 Core memory controllers - "
2075 I7CORE_REVISION);
2076
2077 module_param(edac_op_state, int, 0444);
2078 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
kernel source for telekom puls (alcatel/mediatek)