Linux-2.6.12-rc2
[GitHub/LineageOS/android_kernel_motorola_exynos9610.git] / drivers / atm / fore200e.h
1 /* $Id: fore200e.h,v 1.4 2000/04/14 10:10:34 davem Exp $ */
2 #ifndef _FORE200E_H
3 #define _FORE200E_H
4
5 #ifdef __KERNEL__
6 #include <linux/config.h>
7
8 /* rx buffer sizes */
9
10 #define SMALL_BUFFER_SIZE 384 /* size of small buffers (multiple of 48 (PCA) and 64 (SBA) bytes) */
11 #define LARGE_BUFFER_SIZE 4032 /* size of large buffers (multiple of 48 (PCA) and 64 (SBA) bytes) */
12
13
14 #define RBD_BLK_SIZE 32 /* nbr of supplied rx buffers per rbd */
15
16
17 #define MAX_PDU_SIZE 65535 /* maximum PDU size supported by AALs */
18
19
20 #define BUFFER_S1_SIZE SMALL_BUFFER_SIZE /* size of small buffers, scheme 1 */
21 #define BUFFER_L1_SIZE LARGE_BUFFER_SIZE /* size of large buffers, scheme 1 */
22
23 #define BUFFER_S2_SIZE SMALL_BUFFER_SIZE /* size of small buffers, scheme 2 */
24 #define BUFFER_L2_SIZE LARGE_BUFFER_SIZE /* size of large buffers, scheme 2 */
25
26 #define BUFFER_S1_NBR (RBD_BLK_SIZE * 6)
27 #define BUFFER_L1_NBR (RBD_BLK_SIZE * 4)
28
29 #define BUFFER_S2_NBR (RBD_BLK_SIZE * 6)
30 #define BUFFER_L2_NBR (RBD_BLK_SIZE * 4)
31
32
33 #define QUEUE_SIZE_CMD 16 /* command queue capacity */
34 #define QUEUE_SIZE_RX 64 /* receive queue capacity */
35 #define QUEUE_SIZE_TX 256 /* transmit queue capacity */
36 #define QUEUE_SIZE_BS 32 /* buffer supply queue capacity */
37
38 #define FORE200E_VPI_BITS 0
39 #define FORE200E_VCI_BITS 10
40 #define NBR_CONNECT (1 << (FORE200E_VPI_BITS + FORE200E_VCI_BITS)) /* number of connections */
41
42
43 #define TSD_FIXED 2
44 #define TSD_EXTENSION 0
45 #define TSD_NBR (TSD_FIXED + TSD_EXTENSION)
46
47
48 /* the cp starts putting a received PDU into one *small* buffer,
49 then it uses a number of *large* buffers for the trailing data.
50 we compute here the total number of receive segment descriptors
51 required to hold the largest possible PDU */
52
53 #define RSD_REQUIRED (((MAX_PDU_SIZE - SMALL_BUFFER_SIZE + LARGE_BUFFER_SIZE) / LARGE_BUFFER_SIZE) + 1)
54
55 #define RSD_FIXED 3
56
57 /* RSD_REQUIRED receive segment descriptors are enough to describe a max-sized PDU,
58 but we have to keep the size of the receive PDU descriptor multiple of 32 bytes,
59 so we add one extra RSD to RSD_EXTENSION
60 (WARNING: THIS MAY CHANGE IF BUFFER SIZES ARE MODIFIED) */
61
62 #define RSD_EXTENSION ((RSD_REQUIRED - RSD_FIXED) + 1)
63 #define RSD_NBR (RSD_FIXED + RSD_EXTENSION)
64
65
66 #define FORE200E_DEV(d) ((struct fore200e*)((d)->dev_data))
67 #define FORE200E_VCC(d) ((struct fore200e_vcc*)((d)->dev_data))
68
69 /* bitfields endian games */
70
71 #if defined(__LITTLE_ENDIAN_BITFIELD)
72 #define BITFIELD2(b1, b2) b1; b2;
73 #define BITFIELD3(b1, b2, b3) b1; b2; b3;
74 #define BITFIELD4(b1, b2, b3, b4) b1; b2; b3; b4;
75 #define BITFIELD5(b1, b2, b3, b4, b5) b1; b2; b3; b4; b5;
76 #define BITFIELD6(b1, b2, b3, b4, b5, b6) b1; b2; b3; b4; b5; b6;
77 #elif defined(__BIG_ENDIAN_BITFIELD)
78 #define BITFIELD2(b1, b2) b2; b1;
79 #define BITFIELD3(b1, b2, b3) b3; b2; b1;
80 #define BITFIELD4(b1, b2, b3, b4) b4; b3; b2; b1;
81 #define BITFIELD5(b1, b2, b3, b4, b5) b5; b4; b3; b2; b1;
82 #define BITFIELD6(b1, b2, b3, b4, b5, b6) b6; b5; b4; b3; b2; b1;
83 #else
84 #error unknown bitfield endianess
85 #endif
86
87
88 /* ATM cell header (minus HEC byte) */
89
90 typedef struct atm_header {
91 BITFIELD5(
92 u32 clp : 1, /* cell loss priority */
93 u32 plt : 3, /* payload type */
94 u32 vci : 16, /* virtual channel identifier */
95 u32 vpi : 8, /* virtual path identifier */
96 u32 gfc : 4 /* generic flow control */
97 )
98 } atm_header_t;
99
100
101 /* ATM adaptation layer id */
102
103 typedef enum fore200e_aal {
104 FORE200E_AAL0 = 0,
105 FORE200E_AAL34 = 4,
106 FORE200E_AAL5 = 5,
107 } fore200e_aal_t;
108
109
110 /* transmit PDU descriptor specification */
111
112 typedef struct tpd_spec {
113 BITFIELD4(
114 u32 length : 16, /* total PDU length */
115 u32 nseg : 8, /* number of transmit segments */
116 enum fore200e_aal aal : 4, /* adaptation layer */
117 u32 intr : 4 /* interrupt requested */
118 )
119 } tpd_spec_t;
120
121
122 /* transmit PDU rate control */
123
124 typedef struct tpd_rate
125 {
126 BITFIELD2(
127 u32 idle_cells : 16, /* number of idle cells to insert */
128 u32 data_cells : 16 /* number of data cells to transmit */
129 )
130 } tpd_rate_t;
131
132
133 /* transmit segment descriptor */
134
135 typedef struct tsd {
136 u32 buffer; /* transmit buffer DMA address */
137 u32 length; /* number of bytes in buffer */
138 } tsd_t;
139
140
141 /* transmit PDU descriptor */
142
143 typedef struct tpd {
144 struct atm_header atm_header; /* ATM header minus HEC byte */
145 struct tpd_spec spec; /* tpd specification */
146 struct tpd_rate rate; /* tpd rate control */
147 u32 pad; /* reserved */
148 struct tsd tsd[ TSD_NBR ]; /* transmit segment descriptors */
149 } tpd_t;
150
151
152 /* receive segment descriptor */
153
154 typedef struct rsd {
155 u32 handle; /* host supplied receive buffer handle */
156 u32 length; /* number of bytes in buffer */
157 } rsd_t;
158
159
160 /* receive PDU descriptor */
161
162 typedef struct rpd {
163 struct atm_header atm_header; /* ATM header minus HEC byte */
164 u32 nseg; /* number of receive segments */
165 struct rsd rsd[ RSD_NBR ]; /* receive segment descriptors */
166 } rpd_t;
167
168
169 /* buffer scheme */
170
171 typedef enum buffer_scheme {
172 BUFFER_SCHEME_ONE,
173 BUFFER_SCHEME_TWO,
174 BUFFER_SCHEME_NBR /* always last */
175 } buffer_scheme_t;
176
177
178 /* buffer magnitude */
179
180 typedef enum buffer_magn {
181 BUFFER_MAGN_SMALL,
182 BUFFER_MAGN_LARGE,
183 BUFFER_MAGN_NBR /* always last */
184 } buffer_magn_t;
185
186
187 /* receive buffer descriptor */
188
189 typedef struct rbd {
190 u32 handle; /* host supplied handle */
191 u32 buffer_haddr; /* host DMA address of host buffer */
192 } rbd_t;
193
194
195 /* receive buffer descriptor block */
196
197 typedef struct rbd_block {
198 struct rbd rbd[ RBD_BLK_SIZE ]; /* receive buffer descriptor */
199 } rbd_block_t;
200
201
202 /* tpd DMA address */
203
204 typedef struct tpd_haddr {
205 BITFIELD3(
206 u32 size : 4, /* tpd size expressed in 32 byte blocks */
207 u32 pad : 1, /* reserved */
208 u32 haddr : 27 /* tpd DMA addr aligned on 32 byte boundary */
209 )
210 } tpd_haddr_t;
211
212 #define TPD_HADDR_SHIFT 5 /* addr aligned on 32 byte boundary */
213
214 /* cp resident transmit queue entry */
215
216 typedef struct cp_txq_entry {
217 struct tpd_haddr tpd_haddr; /* host DMA address of tpd */
218 u32 status_haddr; /* host DMA address of completion status */
219 } cp_txq_entry_t;
220
221
222 /* cp resident receive queue entry */
223
224 typedef struct cp_rxq_entry {
225 u32 rpd_haddr; /* host DMA address of rpd */
226 u32 status_haddr; /* host DMA address of completion status */
227 } cp_rxq_entry_t;
228
229
230 /* cp resident buffer supply queue entry */
231
232 typedef struct cp_bsq_entry {
233 u32 rbd_block_haddr; /* host DMA address of rbd block */
234 u32 status_haddr; /* host DMA address of completion status */
235 } cp_bsq_entry_t;
236
237
238 /* completion status */
239
240 typedef volatile enum status {
241 STATUS_PENDING = (1<<0), /* initial status (written by host) */
242 STATUS_COMPLETE = (1<<1), /* completion status (written by cp) */
243 STATUS_FREE = (1<<2), /* initial status (written by host) */
244 STATUS_ERROR = (1<<3) /* completion status (written by cp) */
245 } status_t;
246
247
248 /* cp operation code */
249
250 typedef enum opcode {
251 OPCODE_INITIALIZE = 1, /* initialize board */
252 OPCODE_ACTIVATE_VCIN, /* activate incoming VCI */
253 OPCODE_ACTIVATE_VCOUT, /* activate outgoing VCI */
254 OPCODE_DEACTIVATE_VCIN, /* deactivate incoming VCI */
255 OPCODE_DEACTIVATE_VCOUT, /* deactivate incoing VCI */
256 OPCODE_GET_STATS, /* get board statistics */
257 OPCODE_SET_OC3, /* set OC-3 registers */
258 OPCODE_GET_OC3, /* get OC-3 registers */
259 OPCODE_RESET_STATS, /* reset board statistics */
260 OPCODE_GET_PROM, /* get expansion PROM data (PCI specific) */
261 OPCODE_SET_VPI_BITS, /* set x bits of those decoded by the
262 firmware to be low order bits from
263 the VPI field of the ATM cell header */
264 OPCODE_REQUEST_INTR = (1<<7) /* request interrupt */
265 } opcode_t;
266
267
268 /* virtual path / virtual channel identifers */
269
270 typedef struct vpvc {
271 BITFIELD3(
272 u32 vci : 16, /* virtual channel identifier */
273 u32 vpi : 8, /* virtual path identifier */
274 u32 pad : 8 /* reserved */
275 )
276 } vpvc_t;
277
278
279 /* activate VC command opcode */
280
281 typedef struct activate_opcode {
282 BITFIELD4(
283 enum opcode opcode : 8, /* cp opcode */
284 enum fore200e_aal aal : 8, /* adaptation layer */
285 enum buffer_scheme scheme : 8, /* buffer scheme */
286 u32 pad : 8 /* reserved */
287 )
288 } activate_opcode_t;
289
290
291 /* activate VC command block */
292
293 typedef struct activate_block {
294 struct activate_opcode opcode; /* activate VC command opcode */
295 struct vpvc vpvc; /* VPI/VCI */
296 u32 mtu; /* for AAL0 only */
297
298 } activate_block_t;
299
300
301 /* deactivate VC command opcode */
302
303 typedef struct deactivate_opcode {
304 BITFIELD2(
305 enum opcode opcode : 8, /* cp opcode */
306 u32 pad : 24 /* reserved */
307 )
308 } deactivate_opcode_t;
309
310
311 /* deactivate VC command block */
312
313 typedef struct deactivate_block {
314 struct deactivate_opcode opcode; /* deactivate VC command opcode */
315 struct vpvc vpvc; /* VPI/VCI */
316 } deactivate_block_t;
317
318
319 /* OC-3 registers */
320
321 typedef struct oc3_regs {
322 u32 reg[ 128 ]; /* see the PMC Sierra PC5346 S/UNI-155-Lite
323 Saturn User Network Interface documentation
324 for a description of the OC-3 chip registers */
325 } oc3_regs_t;
326
327
328 /* set/get OC-3 regs command opcode */
329
330 typedef struct oc3_opcode {
331 BITFIELD4(
332 enum opcode opcode : 8, /* cp opcode */
333 u32 reg : 8, /* register index */
334 u32 value : 8, /* register value */
335 u32 mask : 8 /* register mask that specifies which
336 bits of the register value field
337 are significant */
338 )
339 } oc3_opcode_t;
340
341
342 /* set/get OC-3 regs command block */
343
344 typedef struct oc3_block {
345 struct oc3_opcode opcode; /* set/get OC-3 regs command opcode */
346 u32 regs_haddr; /* host DMA address of OC-3 regs buffer */
347 } oc3_block_t;
348
349
350 /* physical encoding statistics */
351
352 typedef struct stats_phy {
353 u32 crc_header_errors; /* cells received with bad header CRC */
354 u32 framing_errors; /* cells received with bad framing */
355 u32 pad[ 2 ]; /* i960 padding */
356 } stats_phy_t;
357
358
359 /* OC-3 statistics */
360
361 typedef struct stats_oc3 {
362 u32 section_bip8_errors; /* section 8 bit interleaved parity */
363 u32 path_bip8_errors; /* path 8 bit interleaved parity */
364 u32 line_bip24_errors; /* line 24 bit interleaved parity */
365 u32 line_febe_errors; /* line far end block errors */
366 u32 path_febe_errors; /* path far end block errors */
367 u32 corr_hcs_errors; /* correctable header check sequence */
368 u32 ucorr_hcs_errors; /* uncorrectable header check sequence */
369 u32 pad[ 1 ]; /* i960 padding */
370 } stats_oc3_t;
371
372
373 /* ATM statistics */
374
375 typedef struct stats_atm {
376 u32 cells_transmitted; /* cells transmitted */
377 u32 cells_received; /* cells received */
378 u32 vpi_bad_range; /* cell drops: VPI out of range */
379 u32 vpi_no_conn; /* cell drops: no connection for VPI */
380 u32 vci_bad_range; /* cell drops: VCI out of range */
381 u32 vci_no_conn; /* cell drops: no connection for VCI */
382 u32 pad[ 2 ]; /* i960 padding */
383 } stats_atm_t;
384
385 /* AAL0 statistics */
386
387 typedef struct stats_aal0 {
388 u32 cells_transmitted; /* cells transmitted */
389 u32 cells_received; /* cells received */
390 u32 cells_dropped; /* cells dropped */
391 u32 pad[ 1 ]; /* i960 padding */
392 } stats_aal0_t;
393
394
395 /* AAL3/4 statistics */
396
397 typedef struct stats_aal34 {
398 u32 cells_transmitted; /* cells transmitted from segmented PDUs */
399 u32 cells_received; /* cells reassembled into PDUs */
400 u32 cells_crc_errors; /* payload CRC error count */
401 u32 cells_protocol_errors; /* SAR or CS layer protocol errors */
402 u32 cells_dropped; /* cells dropped: partial reassembly */
403 u32 cspdus_transmitted; /* CS PDUs transmitted */
404 u32 cspdus_received; /* CS PDUs received */
405 u32 cspdus_protocol_errors; /* CS layer protocol errors */
406 u32 cspdus_dropped; /* reassembled PDUs drop'd (in cells) */
407 u32 pad[ 3 ]; /* i960 padding */
408 } stats_aal34_t;
409
410
411 /* AAL5 statistics */
412
413 typedef struct stats_aal5 {
414 u32 cells_transmitted; /* cells transmitted from segmented SDUs */
415 u32 cells_received; /* cells reassembled into SDUs */
416 u32 cells_dropped; /* reassembled PDUs dropped (in cells) */
417 u32 congestion_experienced; /* CRC error and length wrong */
418 u32 cspdus_transmitted; /* CS PDUs transmitted */
419 u32 cspdus_received; /* CS PDUs received */
420 u32 cspdus_crc_errors; /* CS PDUs CRC errors */
421 u32 cspdus_protocol_errors; /* CS layer protocol errors */
422 u32 cspdus_dropped; /* reassembled PDUs dropped */
423 u32 pad[ 3 ]; /* i960 padding */
424 } stats_aal5_t;
425
426
427 /* auxiliary statistics */
428
429 typedef struct stats_aux {
430 u32 small_b1_failed; /* receive BD allocation failures */
431 u32 large_b1_failed; /* receive BD allocation failures */
432 u32 small_b2_failed; /* receive BD allocation failures */
433 u32 large_b2_failed; /* receive BD allocation failures */
434 u32 rpd_alloc_failed; /* receive PDU allocation failures */
435 u32 receive_carrier; /* no carrier = 0, carrier = 1 */
436 u32 pad[ 2 ]; /* i960 padding */
437 } stats_aux_t;
438
439
440 /* whole statistics buffer */
441
442 typedef struct stats {
443 struct stats_phy phy; /* physical encoding statistics */
444 struct stats_oc3 oc3; /* OC-3 statistics */
445 struct stats_atm atm; /* ATM statistics */
446 struct stats_aal0 aal0; /* AAL0 statistics */
447 struct stats_aal34 aal34; /* AAL3/4 statistics */
448 struct stats_aal5 aal5; /* AAL5 statistics */
449 struct stats_aux aux; /* auxiliary statistics */
450 } stats_t;
451
452
453 /* get statistics command opcode */
454
455 typedef struct stats_opcode {
456 BITFIELD2(
457 enum opcode opcode : 8, /* cp opcode */
458 u32 pad : 24 /* reserved */
459 )
460 } stats_opcode_t;
461
462
463 /* get statistics command block */
464
465 typedef struct stats_block {
466 struct stats_opcode opcode; /* get statistics command opcode */
467 u32 stats_haddr; /* host DMA address of stats buffer */
468 } stats_block_t;
469
470
471 /* expansion PROM data (PCI specific) */
472
473 typedef struct prom_data {
474 u32 hw_revision; /* hardware revision */
475 u32 serial_number; /* board serial number */
476 u8 mac_addr[ 8 ]; /* board MAC address */
477 } prom_data_t;
478
479
480 /* get expansion PROM data command opcode */
481
482 typedef struct prom_opcode {
483 BITFIELD2(
484 enum opcode opcode : 8, /* cp opcode */
485 u32 pad : 24 /* reserved */
486 )
487 } prom_opcode_t;
488
489
490 /* get expansion PROM data command block */
491
492 typedef struct prom_block {
493 struct prom_opcode opcode; /* get PROM data command opcode */
494 u32 prom_haddr; /* host DMA address of PROM buffer */
495 } prom_block_t;
496
497
498 /* cp command */
499
500 typedef union cmd {
501 enum opcode opcode; /* operation code */
502 struct activate_block activate_block; /* activate VC */
503 struct deactivate_block deactivate_block; /* deactivate VC */
504 struct stats_block stats_block; /* get statistics */
505 struct prom_block prom_block; /* get expansion PROM data */
506 struct oc3_block oc3_block; /* get/set OC-3 registers */
507 u32 pad[ 4 ]; /* i960 padding */
508 } cmd_t;
509
510
511 /* cp resident command queue */
512
513 typedef struct cp_cmdq_entry {
514 union cmd cmd; /* command */
515 u32 status_haddr; /* host DMA address of completion status */
516 u32 pad[ 3 ]; /* i960 padding */
517 } cp_cmdq_entry_t;
518
519
520 /* host resident transmit queue entry */
521
522 typedef struct host_txq_entry {
523 struct cp_txq_entry __iomem *cp_entry; /* addr of cp resident tx queue entry */
524 enum status* status; /* addr of host resident status */
525 struct tpd* tpd; /* addr of transmit PDU descriptor */
526 u32 tpd_dma; /* DMA address of tpd */
527 struct sk_buff* skb; /* related skb */
528 void* data; /* copy of misaligned data */
529 unsigned long incarn; /* vc_map incarnation when submitted for tx */
530 struct fore200e_vc_map* vc_map;
531
532 } host_txq_entry_t;
533
534
535 /* host resident receive queue entry */
536
537 typedef struct host_rxq_entry {
538 struct cp_rxq_entry __iomem *cp_entry; /* addr of cp resident rx queue entry */
539 enum status* status; /* addr of host resident status */
540 struct rpd* rpd; /* addr of receive PDU descriptor */
541 u32 rpd_dma; /* DMA address of rpd */
542 } host_rxq_entry_t;
543
544
545 /* host resident buffer supply queue entry */
546
547 typedef struct host_bsq_entry {
548 struct cp_bsq_entry __iomem *cp_entry; /* addr of cp resident buffer supply queue entry */
549 enum status* status; /* addr of host resident status */
550 struct rbd_block* rbd_block; /* addr of receive buffer descriptor block */
551 u32 rbd_block_dma; /* DMA address od rdb */
552 } host_bsq_entry_t;
553
554
555 /* host resident command queue entry */
556
557 typedef struct host_cmdq_entry {
558 struct cp_cmdq_entry __iomem *cp_entry; /* addr of cp resident cmd queue entry */
559 enum status *status; /* addr of host resident status */
560 } host_cmdq_entry_t;
561
562
563 /* chunk of memory */
564
565 typedef struct chunk {
566 void* alloc_addr; /* base address of allocated chunk */
567 void* align_addr; /* base address of aligned chunk */
568 dma_addr_t dma_addr; /* DMA address of aligned chunk */
569 int direction; /* direction of DMA mapping */
570 u32 alloc_size; /* length of allocated chunk */
571 u32 align_size; /* length of aligned chunk */
572 } chunk_t;
573
574 #define dma_size align_size /* DMA useable size */
575
576
577 /* host resident receive buffer */
578
579 typedef struct buffer {
580 struct buffer* next; /* next receive buffer */
581 enum buffer_scheme scheme; /* buffer scheme */
582 enum buffer_magn magn; /* buffer magnitude */
583 struct chunk data; /* data buffer */
584 #ifdef FORE200E_BSQ_DEBUG
585 unsigned long index; /* buffer # in queue */
586 int supplied; /* 'buffer supplied' flag */
587 #endif
588 } buffer_t;
589
590
591 #if (BITS_PER_LONG == 32)
592 #define FORE200E_BUF2HDL(buffer) ((u32)(buffer))
593 #define FORE200E_HDL2BUF(handle) ((struct buffer*)(handle))
594 #else /* deal with 64 bit pointers */
595 #define FORE200E_BUF2HDL(buffer) ((u32)((u64)(buffer)))
596 #define FORE200E_HDL2BUF(handle) ((struct buffer*)(((u64)(handle)) | PAGE_OFFSET))
597 #endif
598
599
600 /* host resident command queue */
601
602 typedef struct host_cmdq {
603 struct host_cmdq_entry host_entry[ QUEUE_SIZE_CMD ]; /* host resident cmd queue entries */
604 int head; /* head of cmd queue */
605 struct chunk status; /* array of completion status */
606 } host_cmdq_t;
607
608
609 /* host resident transmit queue */
610
611 typedef struct host_txq {
612 struct host_txq_entry host_entry[ QUEUE_SIZE_TX ]; /* host resident tx queue entries */
613 int head; /* head of tx queue */
614 int tail; /* tail of tx queue */
615 struct chunk tpd; /* array of tpds */
616 struct chunk status; /* arry of completion status */
617 int txing; /* number of pending PDUs in tx queue */
618 } host_txq_t;
619
620
621 /* host resident receive queue */
622
623 typedef struct host_rxq {
624 struct host_rxq_entry host_entry[ QUEUE_SIZE_RX ]; /* host resident rx queue entries */
625 int head; /* head of rx queue */
626 struct chunk rpd; /* array of rpds */
627 struct chunk status; /* array of completion status */
628 } host_rxq_t;
629
630
631 /* host resident buffer supply queues */
632
633 typedef struct host_bsq {
634 struct host_bsq_entry host_entry[ QUEUE_SIZE_BS ]; /* host resident buffer supply queue entries */
635 int head; /* head of buffer supply queue */
636 struct chunk rbd_block; /* array of rbds */
637 struct chunk status; /* array of completion status */
638 struct buffer* buffer; /* array of rx buffers */
639 struct buffer* freebuf; /* list of free rx buffers */
640 volatile int freebuf_count; /* count of free rx buffers */
641 } host_bsq_t;
642
643
644 /* header of the firmware image */
645
646 typedef struct fw_header {
647 u32 magic; /* magic number */
648 u32 version; /* firmware version id */
649 u32 load_offset; /* fw load offset in board memory */
650 u32 start_offset; /* fw execution start address in board memory */
651 } fw_header_t;
652
653 #define FW_HEADER_MAGIC 0x65726f66 /* 'fore' */
654
655
656 /* receive buffer supply queues scheme specification */
657
658 typedef struct bs_spec {
659 u32 queue_length; /* queue capacity */
660 u32 buffer_size; /* host buffer size */
661 u32 pool_size; /* number of rbds */
662 u32 supply_blksize; /* num of rbds in I/O block (multiple
663 of 4 between 4 and 124 inclusive) */
664 } bs_spec_t;
665
666
667 /* initialization command block (one-time command, not in cmd queue) */
668
669 typedef struct init_block {
670 enum opcode opcode; /* initialize command */
671 enum status status; /* related status word */
672 u32 receive_threshold; /* not used */
673 u32 num_connect; /* ATM connections */
674 u32 cmd_queue_len; /* length of command queue */
675 u32 tx_queue_len; /* length of transmit queue */
676 u32 rx_queue_len; /* length of receive queue */
677 u32 rsd_extension; /* number of extra 32 byte blocks */
678 u32 tsd_extension; /* number of extra 32 byte blocks */
679 u32 conless_vpvc; /* not used */
680 u32 pad[ 2 ]; /* force quad alignment */
681 struct bs_spec bs_spec[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ]; /* buffer supply queues spec */
682 } init_block_t;
683
684
685 typedef enum media_type {
686 MEDIA_TYPE_CAT5_UTP = 0x06, /* unshielded twisted pair */
687 MEDIA_TYPE_MM_OC3_ST = 0x16, /* multimode fiber ST */
688 MEDIA_TYPE_MM_OC3_SC = 0x26, /* multimode fiber SC */
689 MEDIA_TYPE_SM_OC3_ST = 0x36, /* single-mode fiber ST */
690 MEDIA_TYPE_SM_OC3_SC = 0x46 /* single-mode fiber SC */
691 } media_type_t;
692
693 #define FORE200E_MEDIA_INDEX(media_type) ((media_type)>>4)
694
695
696 /* cp resident queues */
697
698 typedef struct cp_queues {
699 u32 cp_cmdq; /* command queue */
700 u32 cp_txq; /* transmit queue */
701 u32 cp_rxq; /* receive queue */
702 u32 cp_bsq[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ]; /* buffer supply queues */
703 u32 imask; /* 1 enables cp to host interrupts */
704 u32 istat; /* 1 for interrupt posted */
705 u32 heap_base; /* offset form beginning of ram */
706 u32 heap_size; /* space available for queues */
707 u32 hlogger; /* non zero for host logging */
708 u32 heartbeat; /* cp heartbeat */
709 u32 fw_release; /* firmware version */
710 u32 mon960_release; /* i960 monitor version */
711 u32 tq_plen; /* transmit throughput measurements */
712 /* make sure the init block remains on a quad word boundary */
713 struct init_block init; /* one time cmd, not in cmd queue */
714 enum media_type media_type; /* media type id */
715 u32 oc3_revision; /* OC-3 revision number */
716 } cp_queues_t;
717
718
719 /* boot status */
720
721 typedef enum boot_status {
722 BSTAT_COLD_START = (u32) 0xc01dc01d, /* cold start */
723 BSTAT_SELFTEST_OK = (u32) 0x02201958, /* self-test ok */
724 BSTAT_SELFTEST_FAIL = (u32) 0xadbadbad, /* self-test failed */
725 BSTAT_CP_RUNNING = (u32) 0xce11feed, /* cp is running */
726 BSTAT_MON_TOO_BIG = (u32) 0x10aded00 /* i960 monitor is too big */
727 } boot_status_t;
728
729
730 /* software UART */
731
732 typedef struct soft_uart {
733 u32 send; /* write register */
734 u32 recv; /* read register */
735 } soft_uart_t;
736
737 #define FORE200E_CP_MONITOR_UART_FREE 0x00000000
738 #define FORE200E_CP_MONITOR_UART_AVAIL 0x01000000
739
740
741 /* i960 monitor */
742
743 typedef struct cp_monitor {
744 struct soft_uart soft_uart; /* software UART */
745 enum boot_status bstat; /* boot status */
746 u32 app_base; /* application base offset */
747 u32 mon_version; /* i960 monitor version */
748 } cp_monitor_t;
749
750
751 /* device state */
752
753 typedef enum fore200e_state {
754 FORE200E_STATE_BLANK, /* initial state */
755 FORE200E_STATE_REGISTER, /* device registered */
756 FORE200E_STATE_CONFIGURE, /* bus interface configured */
757 FORE200E_STATE_MAP, /* board space mapped in host memory */
758 FORE200E_STATE_RESET, /* board resetted */
759 FORE200E_STATE_LOAD_FW, /* firmware loaded */
760 FORE200E_STATE_START_FW, /* firmware started */
761 FORE200E_STATE_INITIALIZE, /* initialize command successful */
762 FORE200E_STATE_INIT_CMDQ, /* command queue initialized */
763 FORE200E_STATE_INIT_TXQ, /* transmit queue initialized */
764 FORE200E_STATE_INIT_RXQ, /* receive queue initialized */
765 FORE200E_STATE_INIT_BSQ, /* buffer supply queue initialized */
766 FORE200E_STATE_ALLOC_BUF, /* receive buffers allocated */
767 FORE200E_STATE_IRQ, /* host interrupt requested */
768 FORE200E_STATE_COMPLETE /* initialization completed */
769 } fore200e_state;
770
771
772 /* PCA-200E registers */
773
774 typedef struct fore200e_pca_regs {
775 volatile u32 __iomem * hcr; /* address of host control register */
776 volatile u32 __iomem * imr; /* address of host interrupt mask register */
777 volatile u32 __iomem * psr; /* address of PCI specific register */
778 } fore200e_pca_regs_t;
779
780
781 /* SBA-200E registers */
782
783 typedef struct fore200e_sba_regs {
784 volatile u32 __iomem *hcr; /* address of host control register */
785 volatile u32 __iomem *bsr; /* address of burst transfer size register */
786 volatile u32 __iomem *isr; /* address of interrupt level selection register */
787 } fore200e_sba_regs_t;
788
789
790 /* model-specific registers */
791
792 typedef union fore200e_regs {
793 struct fore200e_pca_regs pca; /* PCA-200E registers */
794 struct fore200e_sba_regs sba; /* SBA-200E registers */
795 } fore200e_regs;
796
797
798 struct fore200e;
799
800 /* bus-dependent data */
801
802 typedef struct fore200e_bus {
803 char* model_name; /* board model name */
804 char* proc_name; /* board name under /proc/atm */
805 int descr_alignment; /* tpd/rpd/rbd DMA alignment requirement */
806 int buffer_alignment; /* rx buffers DMA alignment requirement */
807 int status_alignment; /* status words DMA alignment requirement */
808 const unsigned char* fw_data; /* address of firmware data start */
809 const unsigned int* fw_size; /* address of firmware data size */
810 u32 (*read)(volatile u32 __iomem *);
811 void (*write)(u32, volatile u32 __iomem *);
812 u32 (*dma_map)(struct fore200e*, void*, int, int);
813 void (*dma_unmap)(struct fore200e*, u32, int, int);
814 void (*dma_sync_for_cpu)(struct fore200e*, u32, int, int);
815 void (*dma_sync_for_device)(struct fore200e*, u32, int, int);
816 int (*dma_chunk_alloc)(struct fore200e*, struct chunk*, int, int, int);
817 void (*dma_chunk_free)(struct fore200e*, struct chunk*);
818 struct fore200e* (*detect)(const struct fore200e_bus*, int);
819 int (*configure)(struct fore200e*);
820 int (*map)(struct fore200e*);
821 void (*reset)(struct fore200e*);
822 int (*prom_read)(struct fore200e*, struct prom_data*);
823 void (*unmap)(struct fore200e*);
824 void (*irq_enable)(struct fore200e*);
825 int (*irq_check)(struct fore200e*);
826 void (*irq_ack)(struct fore200e*);
827 int (*proc_read)(struct fore200e*, char*);
828 } fore200e_bus_t;
829
830 /* vc mapping */
831
832 typedef struct fore200e_vc_map {
833 struct atm_vcc* vcc; /* vcc entry */
834 unsigned long incarn; /* vcc incarnation number */
835 } fore200e_vc_map_t;
836
837 #define FORE200E_VC_MAP(fore200e, vpi, vci) \
838 (& (fore200e)->vc_map[ ((vpi) << FORE200E_VCI_BITS) | (vci) ])
839
840
841 /* per-device data */
842
843 typedef struct fore200e {
844 struct list_head entry; /* next device */
845 const struct fore200e_bus* bus; /* bus-dependent code and data */
846 union fore200e_regs regs; /* bus-dependent registers */
847 struct atm_dev* atm_dev; /* ATM device */
848
849 enum fore200e_state state; /* device state */
850
851 char name[16]; /* device name */
852 void* bus_dev; /* bus-specific kernel data */
853 int irq; /* irq number */
854 unsigned long phys_base; /* physical base address */
855 void __iomem * virt_base; /* virtual base address */
856
857 unsigned char esi[ ESI_LEN ]; /* end system identifier */
858
859 struct cp_monitor __iomem * cp_monitor; /* i960 monitor address */
860 struct cp_queues __iomem * cp_queues; /* cp resident queues */
861 struct host_cmdq host_cmdq; /* host resident cmd queue */
862 struct host_txq host_txq; /* host resident tx queue */
863 struct host_rxq host_rxq; /* host resident rx queue */
864 /* host resident buffer supply queues */
865 struct host_bsq host_bsq[ BUFFER_SCHEME_NBR ][ BUFFER_MAGN_NBR ];
866
867 u32 available_cell_rate; /* remaining pseudo-CBR bw on link */
868
869 int loop_mode; /* S/UNI loopback mode */
870
871 struct stats* stats; /* last snapshot of the stats */
872
873 struct semaphore rate_sf; /* protects rate reservation ops */
874 spinlock_t q_lock; /* protects queue ops */
875 #ifdef FORE200E_USE_TASKLET
876 struct tasklet_struct tx_tasklet; /* performs tx interrupt work */
877 struct tasklet_struct rx_tasklet; /* performs rx interrupt work */
878 #endif
879 unsigned long tx_sat; /* tx queue saturation count */
880
881 unsigned long incarn_count;
882 struct fore200e_vc_map vc_map[ NBR_CONNECT ]; /* vc mapping */
883 } fore200e_t;
884
885
886 /* per-vcc data */
887
888 typedef struct fore200e_vcc {
889 enum buffer_scheme scheme; /* rx buffer scheme */
890 struct tpd_rate rate; /* tx rate control data */
891 int rx_min_pdu; /* size of smallest PDU received */
892 int rx_max_pdu; /* size of largest PDU received */
893 int tx_min_pdu; /* size of smallest PDU transmitted */
894 int tx_max_pdu; /* size of largest PDU transmitted */
895 unsigned long tx_pdu; /* nbr of tx pdus */
896 unsigned long rx_pdu; /* nbr of rx pdus */
897 } fore200e_vcc_t;
898
899
900
901 /* 200E-series common memory layout */
902
903 #define FORE200E_CP_MONITOR_OFFSET 0x00000400 /* i960 monitor interface */
904 #define FORE200E_CP_QUEUES_OFFSET 0x00004d40 /* cp resident queues */
905
906
907 /* PCA-200E memory layout */
908
909 #define PCA200E_IOSPACE_LENGTH 0x00200000
910
911 #define PCA200E_HCR_OFFSET 0x00100000 /* board control register */
912 #define PCA200E_IMR_OFFSET 0x00100004 /* host IRQ mask register */
913 #define PCA200E_PSR_OFFSET 0x00100008 /* PCI specific register */
914
915
916 /* PCA-200E host control register */
917
918 #define PCA200E_HCR_RESET (1<<0) /* read / write */
919 #define PCA200E_HCR_HOLD_LOCK (1<<1) /* read / write */
920 #define PCA200E_HCR_I960FAIL (1<<2) /* read */
921 #define PCA200E_HCR_INTRB (1<<2) /* write */
922 #define PCA200E_HCR_HOLD_ACK (1<<3) /* read */
923 #define PCA200E_HCR_INTRA (1<<3) /* write */
924 #define PCA200E_HCR_OUTFULL (1<<4) /* read */
925 #define PCA200E_HCR_CLRINTR (1<<4) /* write */
926 #define PCA200E_HCR_ESPHOLD (1<<5) /* read */
927 #define PCA200E_HCR_INFULL (1<<6) /* read */
928 #define PCA200E_HCR_TESTMODE (1<<7) /* read */
929
930
931 /* PCA-200E PCI bus interface regs (offsets in PCI config space) */
932
933 #define PCA200E_PCI_LATENCY 0x40 /* maximum slave latenty */
934 #define PCA200E_PCI_MASTER_CTRL 0x41 /* master control */
935 #define PCA200E_PCI_THRESHOLD 0x42 /* burst / continous req threshold */
936
937 /* PBI master control register */
938
939 #define PCA200E_CTRL_DIS_CACHE_RD (1<<0) /* disable cache-line reads */
940 #define PCA200E_CTRL_DIS_WRT_INVAL (1<<1) /* disable writes and invalidates */
941 #define PCA200E_CTRL_2_CACHE_WRT_INVAL (1<<2) /* require 2 cache-lines for writes and invalidates */
942 #define PCA200E_CTRL_IGN_LAT_TIMER (1<<3) /* ignore the latency timer */
943 #define PCA200E_CTRL_ENA_CONT_REQ_MODE (1<<4) /* enable continuous request mode */
944 #define PCA200E_CTRL_LARGE_PCI_BURSTS (1<<5) /* force large PCI bus bursts */
945 #define PCA200E_CTRL_CONVERT_ENDIAN (1<<6) /* convert endianess of slave RAM accesses */
946
947
948
949 #define SBA200E_PROM_NAME "FORE,sba-200e" /* device name in openprom tree */
950
951
952 /* size of SBA-200E registers */
953
954 #define SBA200E_HCR_LENGTH 4
955 #define SBA200E_BSR_LENGTH 4
956 #define SBA200E_ISR_LENGTH 4
957 #define SBA200E_RAM_LENGTH 0x40000
958
959
960 /* SBA-200E SBUS burst transfer size register */
961
962 #define SBA200E_BSR_BURST4 0x04
963 #define SBA200E_BSR_BURST8 0x08
964 #define SBA200E_BSR_BURST16 0x10
965
966
967 /* SBA-200E host control register */
968
969 #define SBA200E_HCR_RESET (1<<0) /* read / write (sticky) */
970 #define SBA200E_HCR_HOLD_LOCK (1<<1) /* read / write (sticky) */
971 #define SBA200E_HCR_I960FAIL (1<<2) /* read */
972 #define SBA200E_HCR_I960SETINTR (1<<2) /* write */
973 #define SBA200E_HCR_OUTFULL (1<<3) /* read */
974 #define SBA200E_HCR_INTR_CLR (1<<3) /* write */
975 #define SBA200E_HCR_INTR_ENA (1<<4) /* read / write (sticky) */
976 #define SBA200E_HCR_ESPHOLD (1<<5) /* read */
977 #define SBA200E_HCR_INFULL (1<<6) /* read */
978 #define SBA200E_HCR_TESTMODE (1<<7) /* read */
979 #define SBA200E_HCR_INTR_REQ (1<<8) /* read */
980
981 #define SBA200E_HCR_STICKY (SBA200E_HCR_RESET | SBA200E_HCR_HOLD_LOCK | SBA200E_HCR_INTR_ENA)
982
983
984 #endif /* __KERNEL__ */
985 #endif /* _FORE200E_H */