drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menuconfig ATA
   6         tristate "Serial ATA and Parallel ATA drivers"
   7         depends on HAS_IOMEM
   8         depends on BLOCK
   9         depends on !(M32R || M68K) || BROKEN
  10         select SCSI
  11         ---help---
  12           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  13           any other ATA device under Linux, say Y and make sure that you know
  14           the name of your ATA host adapter (the card inside your computer
  15           that "speaks" the ATA protocol, also called ATA controller),
  16           because you will be asked for it.
  17
  18           NOTE: ATA enables basic SCSI support; *however*,
  19           'SCSI disk support', 'SCSI tape support', or
  20           'SCSI CDROM support' may also be needed,
  21           depending on your hardware configuration.
  22
  23 if ATA
  24
  25 config ATA_NONSTANDARD
  26        bool
  27        default n
  28
  29 config ATA_VERBOSE_ERROR
  30         bool "Verbose ATA error reporting"
  31         default y
  32         help
  33           This option adds parsing of ATA command descriptions and error bits
  34           in libata kernel output, making it easier to interpret.
  35           This option will enlarge the kernel by approx. 6KB. Disable it only
  36           if kernel size is more important than ease of debugging.
  37
  38           If unsure, say Y.
  39
  40 config ATA_ACPI
  41         bool "ATA ACPI Support"
  42         depends on ACPI && PCI
  43         default y
  44         help
  45           This option adds support for ATA-related ACPI objects.
  46           These ACPI objects add the ability to retrieve taskfiles
  47           from the ACPI BIOS and write them to the disk controller.
  48           These objects may be related to performance, security,
  49           power management, or other areas.
  50           You can disable this at kernel boot time by using the
  51           option libata.noacpi=1
  52
  53 config SATA_PMP
  54         bool "SATA Port Multiplier support"
  55         default y
  56         help
  57           This option adds support for SATA Port Multipliers
  58           (the SATA version of an ethernet hub, or SAS expander).
  59
  60 comment "Controllers with non-SFF native interface"
  61
  62 config SATA_AHCI
  63         tristate "AHCI SATA support"
  64         depends on PCI
  65         help
  66           This option enables support for AHCI Serial ATA.
  67
  68           If unsure, say N.
  69
  70 config SATA_AHCI_PLATFORM
  71         tristate "Platform AHCI SATA support"
  72         help
  73           This option enables support for Platform AHCI Serial ATA
  74           controllers.
  75
  76           If unsure, say N.
  77
  78 config SATA_FSL
  79         tristate "Freescale 3.0Gbps SATA support"
  80         depends on FSL_SOC
  81         help
  82           This option enables support for Freescale 3.0Gbps SATA controller.
  83           It can be found on MPC837x and MPC8315.
  84
  85           If unsure, say N.
  86
  87 config SATA_INIC162X
  88         tristate "Initio 162x SATA support"
  89         depends on PCI
  90         help
  91           This option enables support for Initio 162x Serial ATA.
  92
  93 config SATA_SIL24
  94         tristate "Silicon Image 3124/3132 SATA support"
  95         depends on PCI
  96         help
  97           This option enables support for Silicon Image 3124/3132 Serial ATA.
  98
  99           If unsure, say N.
 100
 101 config ATA_SFF
 102         bool "ATA SFF support"
 103         default y
 104         help
 105           This option adds support for ATA controllers with SFF
 106           compliant or similar programming interface.
 107
 108           SFF is the legacy IDE interface that has been around since
 109           the dawn of time.  Almost all PATA controllers have an
 110           SFF interface.  Many SATA controllers have an SFF interface
 111           when configured into a legacy compatibility mode.
 112
 113           For users with exclusively modern controllers like AHCI,
 114           Silicon Image 3124, or Marvell 6440, you may choose to
 115           disable this unneeded SFF support.
 116
 117           If unsure, say Y.
 118
 119 if ATA_SFF
 120
 121 comment "SFF controllers with custom DMA interface"
 122
 123 config PDC_ADMA
 124         tristate "Pacific Digital ADMA support"
 125         depends on PCI
 126         help
 127           This option enables support for Pacific Digital ADMA controllers
 128
 129           If unsure, say N.
 130
 131 config PATA_MPC52xx
 132         tristate "Freescale MPC52xx SoC internal IDE"
 133         depends on PPC_MPC52xx && PPC_BESTCOMM
 134         select PPC_BESTCOMM_ATA
 135         help
 136           This option enables support for integrated IDE controller
 137           of the Freescale MPC52xx SoC.
 138
 139           If unsure, say N.
 140
 141 config PATA_OCTEON_CF
 142         tristate "OCTEON Boot Bus Compact Flash support"
 143         depends on CPU_CAVIUM_OCTEON
 144         help
 145           This option enables a polled compact flash driver for use with
 146           compact flash cards attached to the OCTEON boot bus.
 147
 148           If unsure, say N.
 149
 150 config SATA_QSTOR
 151         tristate "Pacific Digital SATA QStor support"
 152         depends on PCI
 153         help
 154           This option enables support for Pacific Digital Serial ATA QStor.
 155
 156           If unsure, say N.
 157
 158 config SATA_SX4
 159         tristate "Promise SATA SX4 support (Experimental)"
 160         depends on PCI && EXPERIMENTAL
 161         help
 162           This option enables support for Promise Serial ATA SX4.
 163
 164           If unsure, say N.
 165
 166 config ATA_BMDMA
 167         bool "ATA BMDMA support"
 168         default y
 169         help
 170           This option adds support for SFF ATA controllers with BMDMA
 171           capability.  BMDMA stands for bus-master DMA and is the
 172           de facto DMA interface for SFF controllers.
 173
 174           If unsure, say Y.
 175
 176 if ATA_BMDMA
 177
 178 comment "SATA SFF controllers with BMDMA"
 179
 180 config ATA_PIIX
 181         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 182         depends on PCI
 183         help
 184           This option enables support for ICH5/6/7/8 Serial ATA
 185           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 186           host controllers.
 187
 188           If unsure, say N.
 189
 190 config SATA_DWC
 191         tristate "DesignWare Cores SATA support"
 192         depends on 460EX
 193         help
 194           This option enables support for the on-chip SATA controller of the
 195           AppliedMicro processor 460EX.
 196
 197           If unsure, say N.
 198
 199 config SATA_MV
 200         tristate "Marvell SATA support"
 201         help
 202           This option enables support for the Marvell Serial ATA family.
 203           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 204           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 205
 206           If unsure, say N.
 207
 208 config SATA_NV
 209         tristate "NVIDIA SATA support"
 210         depends on PCI
 211         help
 212           This option enables support for NVIDIA Serial ATA.
 213
 214           If unsure, say N.
 215
 216 config SATA_PROMISE
 217         tristate "Promise SATA TX2/TX4 support"
 218         depends on PCI
 219         help
 220           This option enables support for Promise Serial ATA TX2/TX4.
 221
 222           If unsure, say N.
 223
 224 config SATA_SIL
 225         tristate "Silicon Image SATA support"
 226         depends on PCI
 227         help
 228           This option enables support for Silicon Image Serial ATA.
 229
 230           If unsure, say N.
 231
 232 config SATA_SIS
 233         tristate "SiS 964/965/966/180 SATA support"
 234         depends on PCI
 235         select PATA_SIS
 236         help
 237           This option enables support for SiS Serial ATA on
 238           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 239           The PATA support for SiS 180 requires additionally to
 240           enable the PATA_SIS driver in the config.
 241           If unsure, say N.
 242
 243 config SATA_SVW
 244         tristate "ServerWorks Frodo / Apple K2 SATA support"
 245         depends on PCI
 246         help
 247           This option enables support for Broadcom/Serverworks/Apple K2
 248           SATA support.
 249
 250           If unsure, say N.
 251
 252 config SATA_ULI
 253         tristate "ULi Electronics SATA support"
 254         depends on PCI
 255         help
 256           This option enables support for ULi Electronics SATA.
 257
 258           If unsure, say N.
 259
 260 config SATA_VIA
 261         tristate "VIA SATA support"
 262         depends on PCI
 263         help
 264           This option enables support for VIA Serial ATA.
 265
 266           If unsure, say N.
 267
 268 config SATA_VITESSE
 269         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 270         depends on PCI
 271         help
 272           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 273
 274           If unsure, say N.
 275
 276 comment "PATA SFF controllers with BMDMA"
 277
 278 config PATA_ALI
 279         tristate "ALi PATA support"
 280         depends on PCI
 281         help
 282           This option enables support for the ALi ATA interfaces
 283           found on the many ALi chipsets.
 284
 285           If unsure, say N.
 286
 287 config PATA_AMD
 288         tristate "AMD/NVidia PATA support"
 289         depends on PCI
 290         help
 291           This option enables support for the AMD and NVidia PATA
 292           interfaces found on the chipsets for Athlon/Athlon64.
 293
 294           If unsure, say N.
 295
 296 config PATA_ARTOP
 297         tristate "ARTOP 6210/6260 PATA support"
 298         depends on PCI
 299         help
 300           This option enables support for ARTOP PATA controllers.
 301
 302           If unsure, say N.
 303
 304 config PATA_ATIIXP
 305         tristate "ATI PATA support"
 306         depends on PCI
 307         help
 308           This option enables support for the ATI ATA interfaces
 309           found on the many ATI chipsets.
 310
 311           If unsure, say N.
 312
 313 config PATA_ATP867X
 314         tristate "ARTOP/Acard ATP867X PATA support"
 315         depends on PCI
 316         help
 317           This option enables support for ARTOP/Acard ATP867X PATA
 318           controllers.
 319
 320           If unsure, say N.
 321
 322 config PATA_BF54X
 323         tristate "Blackfin 54x ATAPI support"
 324         depends on BF542 || BF548 || BF549
 325         help
 326           This option enables support for the built-in ATAPI controller on
 327           Blackfin 54x family chips.
 328
 329           If unsure, say N.
 330
 331 config PATA_CMD64X
 332         tristate "CMD64x PATA support"
 333         depends on PCI
 334         help
 335           This option enables support for the CMD64x series chips
 336           except for the CMD640.
 337
 338           If unsure, say N.
 339
 340 config PATA_CS5520
 341         tristate "CS5510/5520 PATA support"
 342         depends on PCI
 343         help
 344           This option enables support for the Cyrix 5510/5520
 345           companion chip used with the MediaGX/Geode processor family.
 346
 347           If unsure, say N.
 348
 349 config PATA_CS5530
 350         tristate "CS5530 PATA support"
 351         depends on PCI
 352         help
 353           This option enables support for the Cyrix/NatSemi/AMD CS5530
 354           companion chip used with the MediaGX/Geode processor family.
 355
 356           If unsure, say N.
 357
 358 config PATA_CS5535
 359         tristate "CS5535 PATA support (Experimental)"
 360         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 361         help
 362           This option enables support for the NatSemi/AMD CS5535
 363           companion chip used with the Geode processor family.
 364
 365           If unsure, say N.
 366
 367 config PATA_CS5536
 368         tristate "CS5536 PATA support"
 369         depends on PCI && X86 && !X86_64
 370         help
 371           This option enables support for the AMD CS5536
 372           companion chip used with the Geode LX processor family.
 373
 374           If unsure, say N.
 375
 376 config PATA_CYPRESS
 377         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 378         depends on PCI && EXPERIMENTAL
 379         help
 380           This option enables support for the Cypress/Contaq CY82C693
 381           chipset found in some Alpha systems
 382
 383           If unsure, say N.
 384
 385 config PATA_EFAR
 386         tristate "EFAR SLC90E66 support"
 387         depends on PCI
 388         help
 389           This option enables support for the EFAR SLC90E66
 390           IDE controller found on some older machines.
 391
 392           If unsure, say N.
 393
 394 config PATA_HPT366
 395         tristate "HPT 366/368 PATA support"
 396         depends on PCI
 397         help
 398           This option enables support for the HPT 366 and 368
 399           PATA controllers via the new ATA layer.
 400
 401           If unsure, say N.
 402
 403 config PATA_HPT37X
 404         tristate "HPT 370/370A/371/372/374/302 PATA support"
 405         depends on PCI
 406         help
 407           This option enables support for the majority of the later HPT
 408           PATA controllers via the new ATA layer.
 409
 410           If unsure, say N.
 411
 412 config PATA_HPT3X2N
 413         tristate "HPT 372N/302N PATA support"
 414         depends on PCI
 415         help
 416           This option enables support for the N variant HPT PATA
 417           controllers via the new ATA layer
 418
 419           If unsure, say N.
 420
 421 config PATA_HPT3X3
 422         tristate "HPT 343/363 PATA support"
 423         depends on PCI
 424         help
 425           This option enables support for the HPT 343/363
 426           PATA controllers via the new ATA layer
 427
 428           If unsure, say N.
 429
 430 config PATA_HPT3X3_DMA
 431         bool "HPT 343/363 DMA support"
 432         depends on PATA_HPT3X3
 433         help
 434           This option enables DMA support for the HPT343/363
 435           controllers. Enable with care as there are still some
 436           problems with DMA on this chipset.
 437
 438 config PATA_ICSIDE
 439         tristate "Acorn ICS PATA support"
 440         depends on ARM && ARCH_ACORN
 441         help
 442           On Acorn systems, say Y here if you wish to use the ICS PATA
 443           interface card.  This is not required for ICS partition support.
 444           If you are unsure, say N to this.
 445
 446 config PATA_IT8213
 447         tristate "IT8213 PATA support (Experimental)"
 448         depends on PCI && EXPERIMENTAL
 449         help
 450           This option enables support for the ITE 821 PATA
 451           controllers via the new ATA layer.
 452
 453           If unsure, say N.
 454
 455 config PATA_IT821X
 456         tristate "IT8211/2 PATA support"
 457         depends on PCI
 458         help
 459           This option enables support for the ITE 8211 and 8212
 460           PATA controllers via the new ATA layer, including RAID
 461           mode.
 462
 463           If unsure, say N.
 464
 465 config PATA_JMICRON
 466         tristate "JMicron PATA support"
 467         depends on PCI
 468         help
 469           Enable support for the JMicron IDE controller, via the new
 470           ATA layer.
 471
 472           If unsure, say N.
 473
 474 config PATA_MACIO
 475         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 476         depends on PPC_PMAC
 477         help
 478           Most IDE capable PowerMacs have IDE busses driven by a variant
 479           of this controller which is part of the Apple chipset used on
 480           most PowerMac models. Some models have multiple busses using
 481           different chipsets, though generally, MacIO is one of them.
 482
 483 config PATA_MARVELL
 484         tristate "Marvell PATA support via legacy mode"
 485         depends on PCI
 486         help
 487           This option enables limited support for the Marvell 88SE61xx ATA
 488           controllers. If you wish to use only the SATA ports then select
 489           the AHCI driver alone. If you wish to the use the PATA port or
 490           both SATA and PATA include this driver.
 491
 492           If unsure, say N.
 493
 494 config PATA_NETCELL
 495         tristate "NETCELL Revolution RAID support"
 496         depends on PCI
 497         help
 498           This option enables support for the Netcell Revolution RAID
 499           PATA controller.
 500
 501           If unsure, say N.
 502
 503 config PATA_NINJA32
 504         tristate "Ninja32/Delkin Cardbus ATA support"
 505         depends on PCI
 506         help
 507           This option enables support for the Ninja32, Delkin and
 508           possibly other brands of Cardbus ATA adapter
 509
 510           If unsure, say N.
 511
 512 config PATA_NS87415
 513         tristate "Nat Semi NS87415 PATA support"
 514         depends on PCI
 515         help
 516           This option enables support for the National Semiconductor
 517           NS87415 PCI-IDE controller.
 518
 519           If unsure, say N.
 520
 521 config PATA_OLDPIIX
 522         tristate "Intel PATA old PIIX support"
 523         depends on PCI
 524         help
 525           This option enables support for early PIIX PATA support.
 526
 527           If unsure, say N.
 528
 529 config PATA_OPTIDMA
 530         tristate "OPTI FireStar PATA support (Very Experimental)"
 531         depends on PCI && EXPERIMENTAL
 532         help
 533           This option enables DMA/PIO support for the later OPTi
 534           controllers found on some old motherboards and in some
 535           laptops.
 536
 537           If unsure, say N.
 538
 539 config PATA_PDC2027X
 540         tristate "Promise PATA 2027x support"
 541         depends on PCI
 542         help
 543           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 544
 545           If unsure, say N.
 546
 547 config PATA_PDC_OLD
 548         tristate "Older Promise PATA controller support"
 549         depends on PCI
 550         help
 551           This option enables support for the Promise 20246, 20262, 20263,
 552           20265 and 20267 adapters.
 553
 554           If unsure, say N.
 555
 556 config PATA_RADISYS
 557         tristate "RADISYS 82600 PATA support (Experimental)"
 558         depends on PCI && EXPERIMENTAL
 559         help
 560           This option enables support for the RADISYS 82600
 561           PATA controllers via the new ATA layer
 562
 563           If unsure, say N.
 564
 565 config PATA_RDC
 566         tristate "RDC PATA support"
 567         depends on PCI
 568         help
 569           This option enables basic support for the later RDC PATA controllers
 570           controllers via the new ATA layer. For the RDC 1010, you need to
 571           enable the IT821X driver instead.
 572
 573           If unsure, say N.
 574
 575 config PATA_SC1200
 576         tristate "SC1200 PATA support"
 577         depends on PCI
 578         help
 579           This option enables support for the NatSemi/AMD SC1200 SoC
 580           companion chip used with the Geode processor family.
 581
 582           If unsure, say N.
 583
 584 config PATA_SCC
 585         tristate "Toshiba's Cell Reference Set IDE support"
 586         depends on PCI && PPC_CELLEB
 587         help
 588           This option enables support for the built-in IDE controller on
 589           Toshiba Cell Reference Board.
 590
 591           If unsure, say N.
 592
 593 config PATA_SCH
 594         tristate "Intel SCH PATA support"
 595         depends on PCI
 596         help
 597           This option enables support for Intel SCH PATA on the Intel
 598           SCH (US15W, US15L, UL11L) series host controllers.
 599
 600           If unsure, say N.
 601
 602 config PATA_SERVERWORKS
 603         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 604         depends on PCI
 605         help
 606           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 607           HT1000 PATA controllers, via the new ATA layer.
 608
 609           If unsure, say N.
 610
 611 config PATA_SIL680
 612         tristate "CMD / Silicon Image 680 PATA support"
 613         depends on PCI
 614         help
 615           This option enables support for CMD / Silicon Image 680 PATA.
 616
 617           If unsure, say N.
 618
 619 config PATA_SIS
 620         tristate "SiS PATA support"
 621         depends on PCI
 622         help
 623           This option enables support for SiS PATA controllers
 624
 625           If unsure, say N.
 626
 627 config PATA_TOSHIBA
 628         tristate "Toshiba Piccolo support (Experimental)"
 629         depends on PCI && EXPERIMENTAL
 630         help
 631           Support for the Toshiba Piccolo controllers. Currently only the
 632           primary channel is supported by this driver.
 633
 634           If unsure, say N.
 635
 636 config PATA_TRIFLEX
 637         tristate "Compaq Triflex PATA support"
 638         depends on PCI
 639         help
 640           Enable support for the Compaq 'Triflex' IDE controller as found
 641           on many Compaq Pentium-Pro systems, via the new ATA layer.
 642
 643           If unsure, say N.
 644
 645 config PATA_VIA
 646         tristate "VIA PATA support"
 647         depends on PCI
 648         help
 649           This option enables support for the VIA PATA interfaces
 650           found on the many VIA chipsets.
 651
 652           If unsure, say N.
 653
 654 config PATA_PXA
 655         tristate "PXA DMA-capable PATA support"
 656         depends on ARCH_PXA
 657         help
 658           This option enables support for harddrive attached to PXA CPU's bus.
 659
 660           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 661                 is not capable of doing MWDMA, use pata_platform instead.
 662
 663           If unsure, say N.
 664
 665 config PATA_WINBOND
 666         tristate "Winbond SL82C105 PATA support"
 667         depends on PCI
 668         help
 669           This option enables support for SL82C105 PATA devices found in the
 670           Netwinder and some other systems
 671
 672           If unsure, say N.
 673
 674 endif # ATA_BMDMA
 675
 676 comment "PIO-only SFF controllers"
 677
 678 config PATA_AT32
 679         tristate "Atmel AVR32 PATA support (Experimental)"
 680         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 681         help
 682           This option enables support for the IDE devices on the
 683           Atmel AT32AP platform.
 684
 685           If unsure, say N.
 686
 687 config PATA_AT91
 688         tristate "PATA support for AT91SAM9260"
 689         depends on ARM && ARCH_AT91
 690         help
 691           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 692
 693           If unsure, say N.
 694
 695 config PATA_CMD640_PCI
 696         tristate "CMD640 PCI PATA support (Experimental)"
 697         depends on PCI && EXPERIMENTAL
 698         help
 699           This option enables support for the CMD640 PCI IDE
 700           interface chip. Only the primary channel is currently
 701           supported.
 702
 703           If unsure, say N.
 704
 705 config PATA_ISAPNP
 706         tristate "ISA Plug and Play PATA support"
 707         depends on ISAPNP
 708         help
 709           This option enables support for ISA plug & play ATA
 710           controllers such as those found on old soundcards.
 711
 712           If unsure, say N.
 713
 714 config PATA_IXP4XX_CF
 715         tristate "IXP4XX Compact Flash support"
 716         depends on ARCH_IXP4XX
 717         help
 718           This option enables support for a Compact Flash connected on
 719           the ixp4xx expansion bus. This driver had been written for
 720           Loft/Avila boards in mind but can work with others.
 721
 722           If unsure, say N.
 723
 724 config PATA_MPIIX
 725         tristate "Intel PATA MPIIX support"
 726         depends on PCI
 727         help
 728           This option enables support for MPIIX PATA support.
 729
 730           If unsure, say N.
 731
 732 config PATA_NS87410
 733         tristate "Nat Semi NS87410 PATA support"
 734         depends on PCI
 735         help
 736           This option enables support for the National Semiconductor
 737           NS87410 PCI-IDE controller.
 738
 739           If unsure, say N.
 740
 741 config PATA_OPTI
 742         tristate "OPTI621/6215 PATA support (Very Experimental)"
 743         depends on PCI && EXPERIMENTAL
 744         help
 745           This option enables full PIO support for the early Opti ATA
 746           controllers found on some old motherboards.
 747
 748           If unsure, say N.
 749
 750 config PATA_PALMLD
 751         tristate "Palm LifeDrive PATA support"
 752         depends on MACH_PALMLD
 753         help
 754           This option enables support for Palm LifeDrive's internal ATA
 755           port via the new ATA layer.
 756
 757           If unsure, say N.
 758
 759 config PATA_PCMCIA
 760         tristate "PCMCIA PATA support"
 761         depends on PCMCIA
 762         help
 763           This option enables support for PCMCIA ATA interfaces, including
 764           compact flash card adapters via the new ATA layer.
 765
 766           If unsure, say N.
 767
 768 config HAVE_PATA_PLATFORM
 769         bool
 770         help
 771           This is an internal configuration node for any machine that
 772           uses pata-platform driver to enable the relevant driver in the
 773           configuration structure without having to submit endless patches
 774           to update the PATA_PLATFORM entry.
 775
 776 config PATA_PLATFORM
 777         tristate "Generic platform device PATA support"
 778         depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM
 779         help
 780           This option enables support for generic directly connected ATA
 781           devices commonly found on embedded systems.
 782
 783           If unsure, say N.
 784
 785 config PATA_OF_PLATFORM
 786         tristate "OpenFirmware platform device PATA support"
 787         depends on PATA_PLATFORM && PPC_OF
 788         help
 789           This option enables support for generic directly connected ATA
 790           devices commonly found on embedded systems with OpenFirmware
 791           bindings.
 792
 793           If unsure, say N.
 794
 795 config PATA_QDI
 796         tristate "QDI VLB PATA support"
 797         depends on ISA
 798         help
 799           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 800
 801 config PATA_RB532
 802         tristate "RouterBoard 532 PATA CompactFlash support"
 803         depends on MIKROTIK_RB532
 804         help
 805           This option enables support for the RouterBoard 532
 806           PATA CompactFlash controller.
 807
 808           If unsure, say N.
 809
 810 config PATA_RZ1000
 811         tristate "PC Tech RZ1000 PATA support"
 812         depends on PCI
 813         help
 814           This option enables basic support for the PC Tech RZ1000/1
 815           PATA controllers via the new ATA layer
 816
 817           If unsure, say N.
 818
 819 config PATA_SAMSUNG_CF
 820         tristate "Samsung SoC PATA support"
 821         depends on SAMSUNG_DEV_IDE
 822         help
 823           This option enables basic support for Samsung's S3C/S5P board
 824           PATA controllers via the new ATA layer
 825
 826           If unsure, say N.
 827
 828 config PATA_WINBOND_VLB
 829         tristate "Winbond W83759A VLB PATA support (Experimental)"
 830         depends on ISA && EXPERIMENTAL
 831         select PATA_LEGACY
 832         help
 833           Support for the Winbond W83759A controller on Vesa Local Bus
 834           systems.
 835
 836 comment "Generic fallback / legacy drivers"
 837
 838 config PATA_ACPI
 839         tristate "ACPI firmware driver for PATA"
 840         depends on ATA_ACPI && ATA_BMDMA
 841         help
 842           This option enables an ACPI method driver which drives
 843           motherboard PATA controller interfaces through the ACPI
 844           firmware in the BIOS. This driver can sometimes handle
 845           otherwise unsupported hardware.
 846
 847 config ATA_GENERIC
 848         tristate "Generic ATA support"
 849         depends on PCI && ATA_BMDMA
 850         help
 851           This option enables support for generic BIOS configured
 852           ATA controllers via the new ATA layer
 853
 854           If unsure, say N.
 855
 856 config PATA_LEGACY
 857         tristate "Legacy ISA PATA support (Experimental)"
 858         depends on (ISA || PCI) && EXPERIMENTAL
 859         help
 860           This option enables support for ISA/VLB/PCI bus legacy PATA
 861           ports and allows them to be accessed via the new ATA layer.
 862
 863           If unsure, say N.
 864
 865 endif # ATA_SFF
 866 endif # ATA