2 /******************************************************************************
4 * Module Name: exresop - AML Interpreter operand/object resolution
6 *****************************************************************************/
9 * Copyright (C) 2000 - 2005, R. Byron Moore
10 * All rights reserved.
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
46 #include <acpi/acpi.h>
47 #include <acpi/amlcode.h>
48 #include <acpi/acparser.h>
49 #include <acpi/acinterp.h>
52 #define _COMPONENT ACPI_EXECUTER
53 ACPI_MODULE_NAME ("exresop")
55 /* Local prototypes */
58 acpi_ex_check_object_type (
59 acpi_object_type type_needed
,
60 acpi_object_type this_type
,
64 /*******************************************************************************
66 * FUNCTION: acpi_ex_check_object_type
68 * PARAMETERS: type_needed Object type needed
69 * this_type Actual object type
70 * Object Object pointer
74 * DESCRIPTION: Check required type against actual type
76 ******************************************************************************/
79 acpi_ex_check_object_type (
80 acpi_object_type type_needed
,
81 acpi_object_type this_type
,
84 ACPI_FUNCTION_NAME ("ex_check_object_type");
87 if (type_needed
== ACPI_TYPE_ANY
) {
88 /* All types OK, so we don't perform any typechecks */
93 if (type_needed
== ACPI_TYPE_LOCAL_REFERENCE
) {
95 * Allow the AML "Constant" opcodes (Zero, One, etc.) to be reference
96 * objects and thus allow them to be targets. (As per the ACPI
97 * specification, a store to a constant is a noop.)
99 if ((this_type
== ACPI_TYPE_INTEGER
) &&
100 (((union acpi_operand_object
*) object
)->common
.flags
& AOPOBJ_AML_CONSTANT
)) {
105 if (type_needed
!= this_type
) {
106 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
107 "Needed [%s], found [%s] %p\n",
108 acpi_ut_get_type_name (type_needed
),
109 acpi_ut_get_type_name (this_type
), object
));
111 return (AE_AML_OPERAND_TYPE
);
118 /*******************************************************************************
120 * FUNCTION: acpi_ex_resolve_operands
122 * PARAMETERS: Opcode - Opcode being interpreted
123 * stack_ptr - Pointer to the operand stack to be
125 * walk_state - Current state
129 * DESCRIPTION: Convert multiple input operands to the types required by the
132 * Each 5-bit group in arg_types represents one required
133 * operand and indicates the required Type. The corresponding operand
134 * will be converted to the required type if possible, otherwise we
135 * abort with an exception.
137 ******************************************************************************/
140 acpi_ex_resolve_operands (
142 union acpi_operand_object
**stack_ptr
,
143 struct acpi_walk_state
*walk_state
)
145 union acpi_operand_object
*obj_desc
;
146 acpi_status status
= AE_OK
;
150 const struct acpi_opcode_info
*op_info
;
152 acpi_object_type type_needed
;
156 ACPI_FUNCTION_TRACE_U32 ("ex_resolve_operands", opcode
);
159 op_info
= acpi_ps_get_opcode_info (opcode
);
160 if (op_info
->class == AML_CLASS_UNKNOWN
) {
161 return_ACPI_STATUS (AE_AML_BAD_OPCODE
);
164 arg_types
= op_info
->runtime_args
;
165 if (arg_types
== ARGI_INVALID_OPCODE
) {
166 ACPI_REPORT_ERROR (("resolve_operands: %X is not a valid AML opcode\n",
169 return_ACPI_STATUS (AE_AML_INTERNAL
);
172 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC
,
173 "Opcode %X [%s] required_operand_types=%8.8X \n",
174 opcode
, op_info
->name
, arg_types
));
177 * Normal exit is with (arg_types == 0) at end of argument list.
178 * Function will return an exception from within the loop upon
179 * finding an entry which is not (or cannot be converted
180 * to) the required type; if stack underflows; or upon
181 * finding a NULL stack entry (which should not happen).
183 while (GET_CURRENT_ARG_TYPE (arg_types
)) {
184 if (!stack_ptr
|| !*stack_ptr
) {
185 ACPI_REPORT_ERROR (("resolve_operands: Null stack entry at %p\n",
188 return_ACPI_STATUS (AE_AML_INTERNAL
);
191 /* Extract useful items */
193 obj_desc
= *stack_ptr
;
195 /* Decode the descriptor type */
197 switch (ACPI_GET_DESCRIPTOR_TYPE (obj_desc
)) {
198 case ACPI_DESC_TYPE_NAMED
:
202 object_type
= ((struct acpi_namespace_node
*) obj_desc
)->type
;
206 case ACPI_DESC_TYPE_OPERAND
:
208 /* ACPI internal object */
210 object_type
= ACPI_GET_OBJECT_TYPE (obj_desc
);
212 /* Check for bad acpi_object_type */
214 if (!acpi_ut_valid_object_type (object_type
)) {
215 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
216 "Bad operand object type [%X]\n",
219 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
222 if (object_type
== (u8
) ACPI_TYPE_LOCAL_REFERENCE
) {
223 /* Decode the Reference */
225 op_info
= acpi_ps_get_opcode_info (opcode
);
226 if (op_info
->class == AML_CLASS_UNKNOWN
) {
227 return_ACPI_STATUS (AE_AML_BAD_OPCODE
);
230 switch (obj_desc
->reference
.opcode
) {
232 target_op
= AML_DEBUG_OP
;
234 /*lint -fallthrough */
241 case AML_LOAD_OP
: /* ddb_handle from LOAD_OP or LOAD_TABLE_OP */
242 case AML_INT_NAMEPATH_OP
: /* Reference to a named object */
244 ACPI_DEBUG_ONLY_MEMBERS (ACPI_DEBUG_PRINT ((ACPI_DB_EXEC
,
245 "Operand is a Reference, ref_opcode [%s]\n",
246 (acpi_ps_get_opcode_info (obj_desc
->reference
.opcode
))->name
)));
250 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
251 "Operand is a Reference, Unknown Reference Opcode %X [%s]\n",
252 obj_desc
->reference
.opcode
,
253 (acpi_ps_get_opcode_info (obj_desc
->reference
.opcode
))->name
));
255 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
263 /* Invalid descriptor */
265 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
266 "Invalid descriptor %p [%s]\n",
267 obj_desc
, acpi_ut_get_descriptor_name (obj_desc
)));
269 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
272 /* Get one argument type, point to the next */
274 this_arg_type
= GET_CURRENT_ARG_TYPE (arg_types
);
275 INCREMENT_ARG_LIST (arg_types
);
278 * Handle cases where the object does not need to be
279 * resolved to a value
281 switch (this_arg_type
) {
282 case ARGI_REF_OR_STRING
: /* Can be a String or Reference */
284 if ((ACPI_GET_DESCRIPTOR_TYPE (obj_desc
) == ACPI_DESC_TYPE_OPERAND
) &&
285 (ACPI_GET_OBJECT_TYPE (obj_desc
) == ACPI_TYPE_STRING
)) {
287 * String found - the string references a named object and
288 * must be resolved to a node
294 * Else not a string - fall through to the normal Reference
297 /*lint -fallthrough */
299 case ARGI_REFERENCE
: /* References: */
300 case ARGI_INTEGER_REF
:
301 case ARGI_OBJECT_REF
:
302 case ARGI_DEVICE_REF
:
303 case ARGI_TARGETREF
: /* Allows implicit conversion rules before store */
304 case ARGI_FIXED_TARGET
: /* No implicit conversion before store to target */
305 case ARGI_SIMPLE_TARGET
: /* Name, Local, or Arg - no implicit conversion */
308 * Need an operand of type ACPI_TYPE_LOCAL_REFERENCE
309 * A Namespace Node is OK as-is
311 if (ACPI_GET_DESCRIPTOR_TYPE (obj_desc
) == ACPI_DESC_TYPE_NAMED
) {
315 status
= acpi_ex_check_object_type (ACPI_TYPE_LOCAL_REFERENCE
,
316 object_type
, obj_desc
);
317 if (ACPI_FAILURE (status
)) {
318 return_ACPI_STATUS (status
);
321 if (obj_desc
->reference
.opcode
== AML_NAME_OP
) {
322 /* Convert a named reference to the actual named object */
324 temp_node
= obj_desc
->reference
.object
;
325 acpi_ut_remove_reference (obj_desc
);
326 (*stack_ptr
) = temp_node
;
331 case ARGI_DATAREFOBJ
: /* Store operator only */
334 * We don't want to resolve index_op reference objects during
335 * a store because this would be an implicit de_ref_of operation.
336 * Instead, we just want to store the reference object.
337 * -- All others must be resolved below.
339 if ((opcode
== AML_STORE_OP
) &&
340 (ACPI_GET_OBJECT_TYPE (*stack_ptr
) == ACPI_TYPE_LOCAL_REFERENCE
) &&
341 ((*stack_ptr
)->reference
.opcode
== AML_INDEX_OP
)) {
347 /* All cases covered above */
352 * Resolve this object to a value
354 status
= acpi_ex_resolve_to_value (stack_ptr
, walk_state
);
355 if (ACPI_FAILURE (status
)) {
356 return_ACPI_STATUS (status
);
359 /* Get the resolved object */
361 obj_desc
= *stack_ptr
;
364 * Check the resulting object (value) type
366 switch (this_arg_type
) {
368 * For the simple cases, only one type of resolved object
373 /* Need an operand of type ACPI_TYPE_MUTEX */
375 type_needed
= ACPI_TYPE_MUTEX
;
380 /* Need an operand of type ACPI_TYPE_EVENT */
382 type_needed
= ACPI_TYPE_EVENT
;
385 case ARGI_PACKAGE
: /* Package */
387 /* Need an operand of type ACPI_TYPE_PACKAGE */
389 type_needed
= ACPI_TYPE_PACKAGE
;
394 /* Any operand type will do */
396 type_needed
= ACPI_TYPE_ANY
;
401 /* Need an operand of type ACPI_TYPE_DDB_HANDLE */
403 type_needed
= ACPI_TYPE_LOCAL_REFERENCE
;
408 * The more complex cases allow multiple resolved object types
413 * Need an operand of type ACPI_TYPE_INTEGER,
414 * But we can implicitly convert from a STRING or BUFFER
415 * Aka - "Implicit Source Operand Conversion"
417 status
= acpi_ex_convert_to_integer (obj_desc
, stack_ptr
, 16);
418 if (ACPI_FAILURE (status
)) {
419 if (status
== AE_TYPE
) {
420 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
421 "Needed [Integer/String/Buffer], found [%s] %p\n",
422 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
424 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
427 return_ACPI_STATUS (status
);
430 if (obj_desc
!= *stack_ptr
) {
431 acpi_ut_remove_reference (obj_desc
);
439 * Need an operand of type ACPI_TYPE_BUFFER,
440 * But we can implicitly convert from a STRING or INTEGER
441 * Aka - "Implicit Source Operand Conversion"
443 status
= acpi_ex_convert_to_buffer (obj_desc
, stack_ptr
);
444 if (ACPI_FAILURE (status
)) {
445 if (status
== AE_TYPE
) {
446 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
447 "Needed [Integer/String/Buffer], found [%s] %p\n",
448 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
450 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
453 return_ACPI_STATUS (status
);
456 if (obj_desc
!= *stack_ptr
) {
457 acpi_ut_remove_reference (obj_desc
);
465 * Need an operand of type ACPI_TYPE_STRING,
466 * But we can implicitly convert from a BUFFER or INTEGER
467 * Aka - "Implicit Source Operand Conversion"
469 status
= acpi_ex_convert_to_string (obj_desc
, stack_ptr
,
470 ACPI_IMPLICIT_CONVERT_HEX
);
471 if (ACPI_FAILURE (status
)) {
472 if (status
== AE_TYPE
) {
473 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
474 "Needed [Integer/String/Buffer], found [%s] %p\n",
475 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
477 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
480 return_ACPI_STATUS (status
);
483 if (obj_desc
!= *stack_ptr
) {
484 acpi_ut_remove_reference (obj_desc
);
489 case ARGI_COMPUTEDATA
:
491 /* Need an operand of type INTEGER, STRING or BUFFER */
493 switch (ACPI_GET_OBJECT_TYPE (obj_desc
)) {
494 case ACPI_TYPE_INTEGER
:
495 case ACPI_TYPE_STRING
:
496 case ACPI_TYPE_BUFFER
:
502 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
503 "Needed [Integer/String/Buffer], found [%s] %p\n",
504 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
506 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
511 case ARGI_BUFFER_OR_STRING
:
513 /* Need an operand of type STRING or BUFFER */
515 switch (ACPI_GET_OBJECT_TYPE (obj_desc
)) {
516 case ACPI_TYPE_STRING
:
517 case ACPI_TYPE_BUFFER
:
522 case ACPI_TYPE_INTEGER
:
524 /* Highest priority conversion is to type Buffer */
526 status
= acpi_ex_convert_to_buffer (obj_desc
, stack_ptr
);
527 if (ACPI_FAILURE (status
)) {
528 return_ACPI_STATUS (status
);
531 if (obj_desc
!= *stack_ptr
) {
532 acpi_ut_remove_reference (obj_desc
);
537 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
538 "Needed [Integer/String/Buffer], found [%s] %p\n",
539 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
541 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
546 case ARGI_DATAOBJECT
:
548 * ARGI_DATAOBJECT is only used by the size_of operator.
549 * Need a buffer, string, package, or ref_of reference.
551 * The only reference allowed here is a direct reference to
554 switch (ACPI_GET_OBJECT_TYPE (obj_desc
)) {
555 case ACPI_TYPE_PACKAGE
:
556 case ACPI_TYPE_STRING
:
557 case ACPI_TYPE_BUFFER
:
558 case ACPI_TYPE_LOCAL_REFERENCE
:
564 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
565 "Needed [Buffer/String/Package/Reference], found [%s] %p\n",
566 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
568 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
573 case ARGI_COMPLEXOBJ
:
575 /* Need a buffer or package or (ACPI 2.0) String */
577 switch (ACPI_GET_OBJECT_TYPE (obj_desc
)) {
578 case ACPI_TYPE_PACKAGE
:
579 case ACPI_TYPE_STRING
:
580 case ACPI_TYPE_BUFFER
:
586 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
587 "Needed [Buffer/String/Package], found [%s] %p\n",
588 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
590 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
595 case ARGI_REGION_OR_FIELD
:
597 /* Need an operand of type REGION or a FIELD in a region */
599 switch (ACPI_GET_OBJECT_TYPE (obj_desc
)) {
600 case ACPI_TYPE_REGION
:
601 case ACPI_TYPE_LOCAL_REGION_FIELD
:
602 case ACPI_TYPE_LOCAL_BANK_FIELD
:
603 case ACPI_TYPE_LOCAL_INDEX_FIELD
:
609 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
610 "Needed [Region/region_field], found [%s] %p\n",
611 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
613 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
618 case ARGI_DATAREFOBJ
:
620 /* Used by the Store() operator only */
622 switch (ACPI_GET_OBJECT_TYPE (obj_desc
)) {
623 case ACPI_TYPE_INTEGER
:
624 case ACPI_TYPE_PACKAGE
:
625 case ACPI_TYPE_STRING
:
626 case ACPI_TYPE_BUFFER
:
627 case ACPI_TYPE_BUFFER_FIELD
:
628 case ACPI_TYPE_LOCAL_REFERENCE
:
629 case ACPI_TYPE_LOCAL_REGION_FIELD
:
630 case ACPI_TYPE_LOCAL_BANK_FIELD
:
631 case ACPI_TYPE_LOCAL_INDEX_FIELD
:
632 case ACPI_TYPE_DDB_HANDLE
:
639 if (acpi_gbl_enable_interpreter_slack
) {
641 * Enable original behavior of Store(), allowing any and all
642 * objects as the source operand. The ACPI spec does not
643 * allow this, however.
648 if (target_op
== AML_DEBUG_OP
) {
649 /* Allow store of any object to the Debug object */
654 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
655 "Needed Integer/Buffer/String/Package/Ref/Ddb], found [%s] %p\n",
656 acpi_ut_get_object_type_name (obj_desc
), obj_desc
));
658 return_ACPI_STATUS (AE_AML_OPERAND_TYPE
);
667 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
668 "Internal - Unknown ARGI (required operand) type %X\n",
671 return_ACPI_STATUS (AE_BAD_PARAMETER
);
675 * Make sure that the original object was resolved to the
676 * required object type (Simple cases only).
678 status
= acpi_ex_check_object_type (type_needed
,
679 ACPI_GET_OBJECT_TYPE (*stack_ptr
), *stack_ptr
);
680 if (ACPI_FAILURE (status
)) {
681 return_ACPI_STATUS (status
);
686 * If more operands needed, decrement stack_ptr to point
687 * to next operand on stack
689 if (GET_CURRENT_ARG_TYPE (arg_types
)) {
694 return_ACPI_STATUS (status
);