2 /******************************************************************************
4 * Module Name: exoparg1 - AML execution - opcodes with 1 argument
6 *****************************************************************************/
9 * Copyright (C) 2000 - 2005, R. Byron Moore
10 * All rights reserved.
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
46 #include <acpi/acpi.h>
47 #include <acpi/acparser.h>
48 #include <acpi/acdispat.h>
49 #include <acpi/acinterp.h>
50 #include <acpi/amlcode.h>
51 #include <acpi/acnamesp.h>
54 #define _COMPONENT ACPI_EXECUTER
55 ACPI_MODULE_NAME ("exoparg1")
59 * Naming convention for AML interpreter execution routines.
61 * The routines that begin execution of AML opcodes are named with a common
62 * convention based upon the number of arguments, the number of target operands,
63 * and whether or not a value is returned:
65 * AcpiExOpcode_xA_yT_zR
69 * xA - ARGUMENTS: The number of arguments (input operands) that are
70 * required for this opcode type (0 through 6 args).
71 * yT - TARGETS: The number of targets (output operands) that are required
72 * for this opcode type (0, 1, or 2 targets).
73 * zR - RETURN VALUE: Indicates whether this opcode type returns a value
74 * as the function return (0 or 1).
76 * The AcpiExOpcode* functions are called via the Dispatcher component with
77 * fully resolved operands.
80 /*******************************************************************************
82 * FUNCTION: acpi_ex_opcode_0A_0T_1R
84 * PARAMETERS: walk_state - Current state (contains AML opcode)
88 * DESCRIPTION: Execute operator with no operands, one return value
90 ******************************************************************************/
93 acpi_ex_opcode_0A_0T_1R (
94 struct acpi_walk_state
*walk_state
)
96 acpi_status status
= AE_OK
;
97 union acpi_operand_object
*return_desc
= NULL
;
100 ACPI_FUNCTION_TRACE_STR ("ex_opcode_0A_0T_1R",
101 acpi_ps_get_opcode_name (walk_state
->opcode
));
104 /* Examine the AML opcode */
106 switch (walk_state
->opcode
) {
107 case AML_TIMER_OP
: /* Timer () */
109 /* Create a return object of type Integer */
111 return_desc
= acpi_ut_create_internal_object (ACPI_TYPE_INTEGER
);
113 status
= AE_NO_MEMORY
;
117 return_desc
->integer
.value
= acpi_os_get_timer ();
120 default: /* Unknown opcode */
122 ACPI_REPORT_ERROR (("acpi_ex_opcode_0A_0T_1R: Unknown opcode %X\n",
123 walk_state
->opcode
));
124 status
= AE_AML_BAD_OPCODE
;
130 if (!walk_state
->result_obj
) {
131 walk_state
->result_obj
= return_desc
;
134 /* Delete return object on error */
136 if (ACPI_FAILURE (status
)) {
137 acpi_ut_remove_reference (return_desc
);
140 return_ACPI_STATUS (status
);
144 /*******************************************************************************
146 * FUNCTION: acpi_ex_opcode_1A_0T_0R
148 * PARAMETERS: walk_state - Current state (contains AML opcode)
152 * DESCRIPTION: Execute Type 1 monadic operator with numeric operand on
155 ******************************************************************************/
158 acpi_ex_opcode_1A_0T_0R (
159 struct acpi_walk_state
*walk_state
)
161 union acpi_operand_object
**operand
= &walk_state
->operands
[0];
162 acpi_status status
= AE_OK
;
165 ACPI_FUNCTION_TRACE_STR ("ex_opcode_1A_0T_0R",
166 acpi_ps_get_opcode_name (walk_state
->opcode
));
169 /* Examine the AML opcode */
171 switch (walk_state
->opcode
) {
172 case AML_RELEASE_OP
: /* Release (mutex_object) */
174 status
= acpi_ex_release_mutex (operand
[0], walk_state
);
178 case AML_RESET_OP
: /* Reset (event_object) */
180 status
= acpi_ex_system_reset_event (operand
[0]);
184 case AML_SIGNAL_OP
: /* Signal (event_object) */
186 status
= acpi_ex_system_signal_event (operand
[0]);
190 case AML_SLEEP_OP
: /* Sleep (msec_time) */
192 status
= acpi_ex_system_do_suspend (operand
[0]->integer
.value
);
196 case AML_STALL_OP
: /* Stall (usec_time) */
198 status
= acpi_ex_system_do_stall ((u32
) operand
[0]->integer
.value
);
202 case AML_UNLOAD_OP
: /* Unload (Handle) */
204 status
= acpi_ex_unload_table (operand
[0]);
208 default: /* Unknown opcode */
210 ACPI_REPORT_ERROR (("acpi_ex_opcode_1A_0T_0R: Unknown opcode %X\n",
211 walk_state
->opcode
));
212 status
= AE_AML_BAD_OPCODE
;
216 return_ACPI_STATUS (status
);
220 /*******************************************************************************
222 * FUNCTION: acpi_ex_opcode_1A_1T_0R
224 * PARAMETERS: walk_state - Current state (contains AML opcode)
228 * DESCRIPTION: Execute opcode with one argument, one target, and no
231 ******************************************************************************/
234 acpi_ex_opcode_1A_1T_0R (
235 struct acpi_walk_state
*walk_state
)
237 acpi_status status
= AE_OK
;
238 union acpi_operand_object
**operand
= &walk_state
->operands
[0];
241 ACPI_FUNCTION_TRACE_STR ("ex_opcode_1A_1T_0R",
242 acpi_ps_get_opcode_name (walk_state
->opcode
));
245 /* Examine the AML opcode */
247 switch (walk_state
->opcode
) {
250 status
= acpi_ex_load_op (operand
[0], operand
[1], walk_state
);
253 default: /* Unknown opcode */
255 ACPI_REPORT_ERROR (("acpi_ex_opcode_1A_1T_0R: Unknown opcode %X\n",
256 walk_state
->opcode
));
257 status
= AE_AML_BAD_OPCODE
;
264 return_ACPI_STATUS (status
);
268 /*******************************************************************************
270 * FUNCTION: acpi_ex_opcode_1A_1T_1R
272 * PARAMETERS: walk_state - Current state (contains AML opcode)
276 * DESCRIPTION: Execute opcode with one argument, one target, and a
279 ******************************************************************************/
282 acpi_ex_opcode_1A_1T_1R (
283 struct acpi_walk_state
*walk_state
)
285 acpi_status status
= AE_OK
;
286 union acpi_operand_object
**operand
= &walk_state
->operands
[0];
287 union acpi_operand_object
*return_desc
= NULL
;
288 union acpi_operand_object
*return_desc2
= NULL
;
291 acpi_integer power_of_ten
;
295 ACPI_FUNCTION_TRACE_STR ("ex_opcode_1A_1T_1R",
296 acpi_ps_get_opcode_name (walk_state
->opcode
));
299 /* Examine the AML opcode */
301 switch (walk_state
->opcode
) {
303 case AML_FIND_SET_LEFT_BIT_OP
:
304 case AML_FIND_SET_RIGHT_BIT_OP
:
305 case AML_FROM_BCD_OP
:
307 case AML_COND_REF_OF_OP
:
309 /* Create a return object of type Integer for these opcodes */
311 return_desc
= acpi_ut_create_internal_object (ACPI_TYPE_INTEGER
);
313 status
= AE_NO_MEMORY
;
317 switch (walk_state
->opcode
) {
318 case AML_BIT_NOT_OP
: /* Not (Operand, Result) */
320 return_desc
->integer
.value
= ~operand
[0]->integer
.value
;
324 case AML_FIND_SET_LEFT_BIT_OP
: /* find_set_left_bit (Operand, Result) */
326 return_desc
->integer
.value
= operand
[0]->integer
.value
;
329 * Acpi specification describes Integer type as a little
330 * endian unsigned value, so this boundary condition is valid.
332 for (temp32
= 0; return_desc
->integer
.value
&&
333 temp32
< ACPI_INTEGER_BIT_SIZE
; ++temp32
) {
334 return_desc
->integer
.value
>>= 1;
337 return_desc
->integer
.value
= temp32
;
341 case AML_FIND_SET_RIGHT_BIT_OP
: /* find_set_right_bit (Operand, Result) */
343 return_desc
->integer
.value
= operand
[0]->integer
.value
;
346 * The Acpi specification describes Integer type as a little
347 * endian unsigned value, so this boundary condition is valid.
349 for (temp32
= 0; return_desc
->integer
.value
&&
350 temp32
< ACPI_INTEGER_BIT_SIZE
; ++temp32
) {
351 return_desc
->integer
.value
<<= 1;
354 /* Since the bit position is one-based, subtract from 33 (65) */
356 return_desc
->integer
.value
= temp32
== 0 ? 0 :
357 (ACPI_INTEGER_BIT_SIZE
+ 1) - temp32
;
361 case AML_FROM_BCD_OP
: /* from_bcd (BCDValue, Result) */
364 * The 64-bit ACPI integer can hold 16 4-bit BCD characters
365 * (if table is 32-bit, integer can hold 8 BCD characters)
366 * Convert each 4-bit BCD value
369 return_desc
->integer
.value
= 0;
370 digit
= operand
[0]->integer
.value
;
372 /* Convert each BCD digit (each is one nybble wide) */
374 for (i
= 0; (i
< acpi_gbl_integer_nybble_width
) && (digit
> 0); i
++) {
375 /* Get the least significant 4-bit BCD digit */
377 temp32
= ((u32
) digit
) & 0xF;
379 /* Check the range of the digit */
382 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
383 "BCD digit too large (not decimal): 0x%X\n",
386 status
= AE_AML_NUMERIC_OVERFLOW
;
390 /* Sum the digit into the result with the current power of 10 */
392 return_desc
->integer
.value
+= (((acpi_integer
) temp32
) *
395 /* Shift to next BCD digit */
399 /* Next power of 10 */
406 case AML_TO_BCD_OP
: /* to_bcd (Operand, Result) */
408 return_desc
->integer
.value
= 0;
409 digit
= operand
[0]->integer
.value
;
411 /* Each BCD digit is one nybble wide */
413 for (i
= 0; (i
< acpi_gbl_integer_nybble_width
) && (digit
> 0); i
++) {
414 (void) acpi_ut_short_divide (digit
, 10, &digit
, &temp32
);
417 * Insert the BCD digit that resides in the
418 * remainder from above
420 return_desc
->integer
.value
|= (((acpi_integer
) temp32
) <<
424 /* Overflow if there is any data left in Digit */
427 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
428 "Integer too large to convert to BCD: %8.8X%8.8X\n",
429 ACPI_FORMAT_UINT64 (operand
[0]->integer
.value
)));
430 status
= AE_AML_NUMERIC_OVERFLOW
;
436 case AML_COND_REF_OF_OP
: /* cond_ref_of (source_object, Result) */
439 * This op is a little strange because the internal return value is
440 * different than the return value stored in the result descriptor
441 * (There are really two return values)
443 if ((struct acpi_namespace_node
*) operand
[0] == acpi_gbl_root_node
) {
445 * This means that the object does not exist in the namespace,
448 return_desc
->integer
.value
= 0;
452 /* Get the object reference, store it, and remove our reference */
454 status
= acpi_ex_get_object_reference (operand
[0],
455 &return_desc2
, walk_state
);
456 if (ACPI_FAILURE (status
)) {
460 status
= acpi_ex_store (return_desc2
, operand
[1], walk_state
);
461 acpi_ut_remove_reference (return_desc2
);
463 /* The object exists in the namespace, return TRUE */
465 return_desc
->integer
.value
= ACPI_INTEGER_MAX
;
470 /* No other opcodes get here */
476 case AML_STORE_OP
: /* Store (Source, Target) */
479 * A store operand is typically a number, string, buffer or lvalue
480 * Be careful about deleting the source object,
481 * since the object itself may have been stored.
483 status
= acpi_ex_store (operand
[0], operand
[1], walk_state
);
484 if (ACPI_FAILURE (status
)) {
485 return_ACPI_STATUS (status
);
488 /* It is possible that the Store already produced a return object */
490 if (!walk_state
->result_obj
) {
492 * Normally, we would remove a reference on the Operand[0]
493 * parameter; But since it is being used as the internal return
494 * object (meaning we would normally increment it), the two
495 * cancel out, and we simply don't do anything.
497 walk_state
->result_obj
= operand
[0];
498 walk_state
->operands
[0] = NULL
; /* Prevent deletion */
500 return_ACPI_STATUS (status
);
506 case AML_COPY_OP
: /* Copy (Source, Target) */
508 status
= acpi_ut_copy_iobject_to_iobject (operand
[0], &return_desc
,
513 case AML_TO_DECSTRING_OP
: /* to_decimal_string (Data, Result) */
515 status
= acpi_ex_convert_to_string (operand
[0], &return_desc
,
516 ACPI_EXPLICIT_CONVERT_DECIMAL
);
517 if (return_desc
== operand
[0]) {
518 /* No conversion performed, add ref to handle return value */
519 acpi_ut_add_reference (return_desc
);
524 case AML_TO_HEXSTRING_OP
: /* to_hex_string (Data, Result) */
526 status
= acpi_ex_convert_to_string (operand
[0], &return_desc
,
527 ACPI_EXPLICIT_CONVERT_HEX
);
528 if (return_desc
== operand
[0]) {
529 /* No conversion performed, add ref to handle return value */
530 acpi_ut_add_reference (return_desc
);
535 case AML_TO_BUFFER_OP
: /* to_buffer (Data, Result) */
537 status
= acpi_ex_convert_to_buffer (operand
[0], &return_desc
);
538 if (return_desc
== operand
[0]) {
539 /* No conversion performed, add ref to handle return value */
540 acpi_ut_add_reference (return_desc
);
545 case AML_TO_INTEGER_OP
: /* to_integer (Data, Result) */
547 status
= acpi_ex_convert_to_integer (operand
[0], &return_desc
,
549 if (return_desc
== operand
[0]) {
550 /* No conversion performed, add ref to handle return value */
551 acpi_ut_add_reference (return_desc
);
556 case AML_SHIFT_LEFT_BIT_OP
: /* shift_left_bit (Source, bit_num) */
557 case AML_SHIFT_RIGHT_BIT_OP
: /* shift_right_bit (Source, bit_num) */
559 /* These are two obsolete opcodes */
561 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
562 "%s is obsolete and not implemented\n",
563 acpi_ps_get_opcode_name (walk_state
->opcode
)));
568 default: /* Unknown opcode */
570 ACPI_REPORT_ERROR (("acpi_ex_opcode_1A_1T_1R: Unknown opcode %X\n",
571 walk_state
->opcode
));
572 status
= AE_AML_BAD_OPCODE
;
576 if (ACPI_SUCCESS (status
)) {
577 /* Store the return value computed above into the target object */
579 status
= acpi_ex_store (return_desc
, operand
[1], walk_state
);
585 if (!walk_state
->result_obj
) {
586 walk_state
->result_obj
= return_desc
;
589 /* Delete return object on error */
591 if (ACPI_FAILURE (status
)) {
592 acpi_ut_remove_reference (return_desc
);
595 return_ACPI_STATUS (status
);
599 /*******************************************************************************
601 * FUNCTION: acpi_ex_opcode_1A_0T_1R
603 * PARAMETERS: walk_state - Current state (contains AML opcode)
607 * DESCRIPTION: Execute opcode with one argument, no target, and a return value
609 ******************************************************************************/
612 acpi_ex_opcode_1A_0T_1R (
613 struct acpi_walk_state
*walk_state
)
615 union acpi_operand_object
**operand
= &walk_state
->operands
[0];
616 union acpi_operand_object
*temp_desc
;
617 union acpi_operand_object
*return_desc
= NULL
;
618 acpi_status status
= AE_OK
;
623 ACPI_FUNCTION_TRACE_STR ("ex_opcode_1A_0T_1R",
624 acpi_ps_get_opcode_name (walk_state
->opcode
));
627 /* Examine the AML opcode */
629 switch (walk_state
->opcode
) {
630 case AML_LNOT_OP
: /* LNot (Operand) */
632 return_desc
= acpi_ut_create_internal_object (ACPI_TYPE_INTEGER
);
634 status
= AE_NO_MEMORY
;
639 * Set result to ONES (TRUE) if Value == 0. Note:
640 * return_desc->Integer.Value is initially == 0 (FALSE) from above.
642 if (!operand
[0]->integer
.value
) {
643 return_desc
->integer
.value
= ACPI_INTEGER_MAX
;
648 case AML_DECREMENT_OP
: /* Decrement (Operand) */
649 case AML_INCREMENT_OP
: /* Increment (Operand) */
652 * Create a new integer. Can't just get the base integer and
653 * increment it because it may be an Arg or Field.
655 return_desc
= acpi_ut_create_internal_object (ACPI_TYPE_INTEGER
);
657 status
= AE_NO_MEMORY
;
662 * Since we are expecting a Reference operand, it can be either a
663 * NS Node or an internal object.
665 temp_desc
= operand
[0];
666 if (ACPI_GET_DESCRIPTOR_TYPE (temp_desc
) == ACPI_DESC_TYPE_OPERAND
) {
667 /* Internal reference object - prevent deletion */
669 acpi_ut_add_reference (temp_desc
);
673 * Convert the Reference operand to an Integer (This removes a
674 * reference on the Operand[0] object)
676 * NOTE: We use LNOT_OP here in order to force resolution of the
677 * reference operand to an actual integer.
679 status
= acpi_ex_resolve_operands (AML_LNOT_OP
, &temp_desc
, walk_state
);
680 if (ACPI_FAILURE (status
)) {
681 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
, "%s: bad operand(s) %s\n",
682 acpi_ps_get_opcode_name (walk_state
->opcode
),
683 acpi_format_exception(status
)));
689 * temp_desc is now guaranteed to be an Integer object --
690 * Perform the actual increment or decrement
692 if (walk_state
->opcode
== AML_INCREMENT_OP
) {
693 return_desc
->integer
.value
= temp_desc
->integer
.value
+1;
696 return_desc
->integer
.value
= temp_desc
->integer
.value
-1;
699 /* Finished with this Integer object */
701 acpi_ut_remove_reference (temp_desc
);
704 * Store the result back (indirectly) through the original
707 status
= acpi_ex_store (return_desc
, operand
[0], walk_state
);
711 case AML_TYPE_OP
: /* object_type (source_object) */
714 * Note: The operand is not resolved at this point because we want to
715 * get the associated object, not its value. For example, we don't
716 * want to resolve a field_unit to its value, we want the actual
720 /* Get the type of the base object */
722 status
= acpi_ex_resolve_multiple (walk_state
, operand
[0], &type
, NULL
);
723 if (ACPI_FAILURE (status
)) {
726 /* Allocate a descriptor to hold the type. */
728 return_desc
= acpi_ut_create_internal_object (ACPI_TYPE_INTEGER
);
730 status
= AE_NO_MEMORY
;
734 return_desc
->integer
.value
= type
;
738 case AML_SIZE_OF_OP
: /* size_of (source_object) */
741 * Note: The operand is not resolved at this point because we want to
742 * get the associated object, not its value.
745 /* Get the base object */
747 status
= acpi_ex_resolve_multiple (walk_state
,
748 operand
[0], &type
, &temp_desc
);
749 if (ACPI_FAILURE (status
)) {
754 * The type of the base object must be integer, buffer, string, or
755 * package. All others are not supported.
757 * NOTE: Integer is not specifically supported by the ACPI spec,
758 * but is supported implicitly via implicit operand conversion.
759 * rather than bother with conversion, we just use the byte width
760 * global (4 or 8 bytes).
763 case ACPI_TYPE_INTEGER
:
764 value
= acpi_gbl_integer_byte_width
;
767 case ACPI_TYPE_BUFFER
:
768 value
= temp_desc
->buffer
.length
;
771 case ACPI_TYPE_STRING
:
772 value
= temp_desc
->string
.length
;
775 case ACPI_TYPE_PACKAGE
:
776 value
= temp_desc
->package
.count
;
780 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
781 "size_of - Operand is not Buf/Int/Str/Pkg - found type %s\n",
782 acpi_ut_get_type_name (type
)));
783 status
= AE_AML_OPERAND_TYPE
;
788 * Now that we have the size of the object, create a result
789 * object to hold the value
791 return_desc
= acpi_ut_create_internal_object (ACPI_TYPE_INTEGER
);
793 status
= AE_NO_MEMORY
;
797 return_desc
->integer
.value
= value
;
801 case AML_REF_OF_OP
: /* ref_of (source_object) */
803 status
= acpi_ex_get_object_reference (operand
[0], &return_desc
, walk_state
);
804 if (ACPI_FAILURE (status
)) {
810 case AML_DEREF_OF_OP
: /* deref_of (obj_reference | String) */
812 /* Check for a method local or argument, or standalone String */
814 if (ACPI_GET_DESCRIPTOR_TYPE (operand
[0]) != ACPI_DESC_TYPE_NAMED
) {
815 switch (ACPI_GET_OBJECT_TYPE (operand
[0])) {
816 case ACPI_TYPE_LOCAL_REFERENCE
:
818 * This is a deref_of (local_x | arg_x)
820 * Must resolve/dereference the local/arg reference first
822 switch (operand
[0]->reference
.opcode
) {
826 /* Set Operand[0] to the value of the local/arg */
828 status
= acpi_ds_method_data_get_value (
829 operand
[0]->reference
.opcode
,
830 operand
[0]->reference
.offset
,
831 walk_state
, &temp_desc
);
832 if (ACPI_FAILURE (status
)) {
837 * Delete our reference to the input object and
838 * point to the object just retrieved
840 acpi_ut_remove_reference (operand
[0]);
841 operand
[0] = temp_desc
;
846 /* Get the object to which the reference refers */
848 temp_desc
= operand
[0]->reference
.object
;
849 acpi_ut_remove_reference (operand
[0]);
850 operand
[0] = temp_desc
;
855 /* Must be an Index op - handled below */
861 case ACPI_TYPE_STRING
:
864 * This is a deref_of (String). The string is a reference
865 * to a named ACPI object.
867 * 1) Find the owning Node
868 * 2) Dereference the node to an actual object. Could be a
869 * Field, so we need to resolve the node to a value.
871 status
= acpi_ns_get_node_by_path (operand
[0]->string
.pointer
,
872 walk_state
->scope_info
->scope
.node
,
873 ACPI_NS_SEARCH_PARENT
,
874 ACPI_CAST_INDIRECT_PTR (
875 struct acpi_namespace_node
, &return_desc
));
876 if (ACPI_FAILURE (status
)) {
880 status
= acpi_ex_resolve_node_to_value (
881 ACPI_CAST_INDIRECT_PTR (
882 struct acpi_namespace_node
, &return_desc
),
889 status
= AE_AML_OPERAND_TYPE
;
894 /* Operand[0] may have changed from the code above */
896 if (ACPI_GET_DESCRIPTOR_TYPE (operand
[0]) == ACPI_DESC_TYPE_NAMED
) {
898 * This is a deref_of (object_reference)
899 * Get the actual object from the Node (This is the dereference).
900 * This case may only happen when a local_x or arg_x is
901 * dereferenced above.
903 return_desc
= acpi_ns_get_attached_object (
904 (struct acpi_namespace_node
*) operand
[0]);
908 * This must be a reference object produced by either the
909 * Index() or ref_of() operator
911 switch (operand
[0]->reference
.opcode
) {
915 * The target type for the Index operator must be
916 * either a Buffer or a Package
918 switch (operand
[0]->reference
.target_type
) {
919 case ACPI_TYPE_BUFFER_FIELD
:
921 temp_desc
= operand
[0]->reference
.object
;
924 * Create a new object that contains one element of the
925 * buffer -- the element pointed to by the index.
927 * NOTE: index into a buffer is NOT a pointer to a
928 * sub-buffer of the main buffer, it is only a pointer to a
929 * single element (byte) of the buffer!
931 return_desc
= acpi_ut_create_internal_object (ACPI_TYPE_INTEGER
);
933 status
= AE_NO_MEMORY
;
938 * Since we are returning the value of the buffer at the
939 * indexed location, we don't need to add an additional
940 * reference to the buffer itself.
942 return_desc
->integer
.value
=
943 temp_desc
->buffer
.pointer
[operand
[0]->reference
.offset
];
947 case ACPI_TYPE_PACKAGE
:
950 * Return the referenced element of the package. We must
951 * add another reference to the referenced object, however.
953 return_desc
= *(operand
[0]->reference
.where
);
956 * We can't return a NULL dereferenced value. This is
957 * an uninitialized package element and is thus a
960 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
961 "NULL package element obj %p\n",
963 status
= AE_AML_UNINITIALIZED_ELEMENT
;
967 acpi_ut_add_reference (return_desc
);
973 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
974 "Unknown Index target_type %X in obj %p\n",
975 operand
[0]->reference
.target_type
, operand
[0]));
976 status
= AE_AML_OPERAND_TYPE
;
984 return_desc
= operand
[0]->reference
.object
;
986 if (ACPI_GET_DESCRIPTOR_TYPE (return_desc
) ==
987 ACPI_DESC_TYPE_NAMED
) {
989 return_desc
= acpi_ns_get_attached_object (
990 (struct acpi_namespace_node
*) return_desc
);
993 /* Add another reference to the object! */
995 acpi_ut_add_reference (return_desc
);
1000 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR
,
1001 "Unknown opcode in ref(%p) - %X\n",
1002 operand
[0], operand
[0]->reference
.opcode
));
1013 ACPI_REPORT_ERROR (("acpi_ex_opcode_1A_0T_1R: Unknown opcode %X\n",
1014 walk_state
->opcode
));
1015 status
= AE_AML_BAD_OPCODE
;
1022 /* Delete return object on error */
1024 if (ACPI_FAILURE (status
)) {
1025 acpi_ut_remove_reference (return_desc
);
1028 walk_state
->result_obj
= return_desc
;
1029 return_ACPI_STATUS (status
);