drivers/acpi/executer/excreate.c

   1 /******************************************************************************
   2  *
   3  * Module Name: excreate - Named object creation
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2006, R. Byron Moore
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include <acpi/acinterp.h>
  46 #include <acpi/amlcode.h>
  47 #include <acpi/acnamesp.h>
  48 #include <acpi/acevents.h>
  49 #include <acpi/actables.h>
  50
  51 #define _COMPONENT          ACPI_EXECUTER
  52 ACPI_MODULE_NAME("excreate")
  53
  54 #ifndef ACPI_NO_METHOD_EXECUTION
  55 /*******************************************************************************
  56  *
  57  * FUNCTION:    acpi_ex_create_alias
  58  *
  59  * PARAMETERS:  walk_state           - Current state, contains operands
  60  *
  61  * RETURN:      Status
  62  *
  63  * DESCRIPTION: Create a new named alias
  64  *
  65  ******************************************************************************/
  66 acpi_status acpi_ex_create_alias(struct acpi_walk_state *walk_state)
  67 {
  68         struct acpi_namespace_node *target_node;
  69         struct acpi_namespace_node *alias_node;
  70         acpi_status status = AE_OK;
  71
  72         ACPI_FUNCTION_TRACE("ex_create_alias");
  73
  74         /* Get the source/alias operands (both namespace nodes) */
  75
  76         alias_node = (struct acpi_namespace_node *)walk_state->operands[0];
  77         target_node = (struct acpi_namespace_node *)walk_state->operands[1];
  78
  79         if ((target_node->type == ACPI_TYPE_LOCAL_ALIAS) ||
  80             (target_node->type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
  81                 /*
  82                  * Dereference an existing alias so that we don't create a chain
  83                  * of aliases.  With this code, we guarantee that an alias is
  84                  * always exactly one level of indirection away from the
  85                  * actual aliased name.
  86                  */
  87                 target_node =
  88                     ACPI_CAST_PTR(struct acpi_namespace_node,
  89                                   target_node->object);
  90         }
  91
  92         /*
  93          * For objects that can never change (i.e., the NS node will
  94          * permanently point to the same object), we can simply attach
  95          * the object to the new NS node.  For other objects (such as
  96          * Integers, buffers, etc.), we have to point the Alias node
  97          * to the original Node.
  98          */
  99         switch (target_node->type) {
 100         case ACPI_TYPE_INTEGER:
 101         case ACPI_TYPE_STRING:
 102         case ACPI_TYPE_BUFFER:
 103         case ACPI_TYPE_PACKAGE:
 104         case ACPI_TYPE_BUFFER_FIELD:
 105
 106                 /*
 107                  * The new alias has the type ALIAS and points to the original
 108                  * NS node, not the object itself.  This is because for these
 109                  * types, the object can change dynamically via a Store.
 110                  */
 111                 alias_node->type = ACPI_TYPE_LOCAL_ALIAS;
 112                 alias_node->object =
 113                     ACPI_CAST_PTR(union acpi_operand_object, target_node);
 114                 break;
 115
 116         case ACPI_TYPE_METHOD:
 117
 118                 /*
 119                  * The new alias has the type ALIAS and points to the original
 120                  * NS node, not the object itself.  This is because for these
 121                  * types, the object can change dynamically via a Store.
 122                  */
 123                 alias_node->type = ACPI_TYPE_LOCAL_METHOD_ALIAS;
 124                 alias_node->object =
 125                     ACPI_CAST_PTR(union acpi_operand_object, target_node);
 126                 break;
 127
 128         default:
 129
 130                 /* Attach the original source object to the new Alias Node */
 131
 132                 /*
 133                  * The new alias assumes the type of the target, and it points
 134                  * to the same object.  The reference count of the object has an
 135                  * additional reference to prevent deletion out from under either the
 136                  * target node or the alias Node
 137                  */
 138                 status = acpi_ns_attach_object(alias_node,
 139                                                acpi_ns_get_attached_object
 140                                                (target_node),
 141                                                target_node->type);
 142                 break;
 143         }
 144
 145         /* Since both operands are Nodes, we don't need to delete them */
 146
 147         return_ACPI_STATUS(status);
 148 }
 149
 150 /*******************************************************************************
 151  *
 152  * FUNCTION:    acpi_ex_create_event
 153  *
 154  * PARAMETERS:  walk_state          - Current state
 155  *
 156  * RETURN:      Status
 157  *
 158  * DESCRIPTION: Create a new event object
 159  *
 160  ******************************************************************************/
 161
 162 acpi_status acpi_ex_create_event(struct acpi_walk_state *walk_state)
 163 {
 164         acpi_status status;
 165         union acpi_operand_object *obj_desc;
 166
 167         ACPI_FUNCTION_TRACE("ex_create_event");
 168
 169         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_EVENT);
 170         if (!obj_desc) {
 171                 status = AE_NO_MEMORY;
 172                 goto cleanup;
 173         }
 174
 175         /*
 176          * Create the actual OS semaphore, with zero initial units -- meaning
 177          * that the event is created in an unsignalled state
 178          */
 179         status = acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0,
 180                                           &obj_desc->event.semaphore);
 181         if (ACPI_FAILURE(status)) {
 182                 goto cleanup;
 183         }
 184
 185         /* Attach object to the Node */
 186
 187         status =
 188             acpi_ns_attach_object((struct acpi_namespace_node *)walk_state->
 189                                   operands[0], obj_desc, ACPI_TYPE_EVENT);
 190
 191       cleanup:
 192         /*
 193          * Remove local reference to the object (on error, will cause deletion
 194          * of both object and semaphore if present.)
 195          */
 196         acpi_ut_remove_reference(obj_desc);
 197         return_ACPI_STATUS(status);
 198 }
 199
 200 /*******************************************************************************
 201  *
 202  * FUNCTION:    acpi_ex_create_mutex
 203  *
 204  * PARAMETERS:  walk_state          - Current state
 205  *
 206  * RETURN:      Status
 207  *
 208  * DESCRIPTION: Create a new mutex object
 209  *
 210  *              Mutex (Name[0], sync_level[1])
 211  *
 212  ******************************************************************************/
 213
 214 acpi_status acpi_ex_create_mutex(struct acpi_walk_state *walk_state)
 215 {
 216         acpi_status status = AE_OK;
 217         union acpi_operand_object *obj_desc;
 218
 219         ACPI_FUNCTION_TRACE_PTR("ex_create_mutex", ACPI_WALK_OPERANDS);
 220
 221         /* Create the new mutex object */
 222
 223         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_MUTEX);
 224         if (!obj_desc) {
 225                 status = AE_NO_MEMORY;
 226                 goto cleanup;
 227         }
 228
 229         /*
 230          * Create the actual OS semaphore.
 231          * One unit max to make it a mutex, with one initial unit to allow
 232          * the mutex to be acquired.
 233          */
 234         status = acpi_os_create_semaphore(1, 1, &obj_desc->mutex.semaphore);
 235         if (ACPI_FAILURE(status)) {
 236                 goto cleanup;
 237         }
 238
 239         /* Init object and attach to NS node */
 240
 241         obj_desc->mutex.sync_level =
 242             (u8) walk_state->operands[1]->integer.value;
 243         obj_desc->mutex.node =
 244             (struct acpi_namespace_node *)walk_state->operands[0];
 245
 246         status = acpi_ns_attach_object(obj_desc->mutex.node,
 247                                        obj_desc, ACPI_TYPE_MUTEX);
 248
 249       cleanup:
 250         /*
 251          * Remove local reference to the object (on error, will cause deletion
 252          * of both object and semaphore if present.)
 253          */
 254         acpi_ut_remove_reference(obj_desc);
 255         return_ACPI_STATUS(status);
 256 }
 257
 258 /*******************************************************************************
 259  *
 260  * FUNCTION:    acpi_ex_create_region
 261  *
 262  * PARAMETERS:  aml_start           - Pointer to the region declaration AML
 263  *              aml_length          - Max length of the declaration AML
 264  *              region_space        - space_iD for the region
 265  *              walk_state          - Current state
 266  *
 267  * RETURN:      Status
 268  *
 269  * DESCRIPTION: Create a new operation region object
 270  *
 271  ******************************************************************************/
 272
 273 acpi_status
 274 acpi_ex_create_region(u8 * aml_start,
 275                       u32 aml_length,
 276                       u8 region_space, struct acpi_walk_state *walk_state)
 277 {
 278         acpi_status status;
 279         union acpi_operand_object *obj_desc;
 280         struct acpi_namespace_node *node;
 281         union acpi_operand_object *region_obj2;
 282
 283         ACPI_FUNCTION_TRACE("ex_create_region");
 284
 285         /* Get the Namespace Node */
 286
 287         node = walk_state->op->common.node;
 288
 289         /*
 290          * If the region object is already attached to this node,
 291          * just return
 292          */
 293         if (acpi_ns_get_attached_object(node)) {
 294                 return_ACPI_STATUS(AE_OK);
 295         }
 296
 297         /*
 298          * Space ID must be one of the predefined IDs, or in the user-defined
 299          * range
 300          */
 301         if ((region_space >= ACPI_NUM_PREDEFINED_REGIONS) &&
 302             (region_space < ACPI_USER_REGION_BEGIN)) {
 303                 ACPI_REPORT_ERROR(("Invalid address_space type %X\n",
 304                                    region_space));
 305                 return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID);
 306         }
 307
 308         ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Region Type - %s (%X)\n",
 309                           acpi_ut_get_region_name(region_space), region_space));
 310
 311         /* Create the region descriptor */
 312
 313         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_REGION);
 314         if (!obj_desc) {
 315                 status = AE_NO_MEMORY;
 316                 goto cleanup;
 317         }
 318
 319         /*
 320          * Remember location in AML stream of address & length
 321          * operands since they need to be evaluated at run time.
 322          */
 323         region_obj2 = obj_desc->common.next_object;
 324         region_obj2->extra.aml_start = aml_start;
 325         region_obj2->extra.aml_length = aml_length;
 326
 327         /* Init the region from the operands */
 328
 329         obj_desc->region.space_id = region_space;
 330         obj_desc->region.address = 0;
 331         obj_desc->region.length = 0;
 332         obj_desc->region.node = node;
 333
 334         /* Install the new region object in the parent Node */
 335
 336         status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_REGION);
 337
 338       cleanup:
 339
 340         /* Remove local reference to the object */
 341
 342         acpi_ut_remove_reference(obj_desc);
 343         return_ACPI_STATUS(status);
 344 }
 345
 346 /*******************************************************************************
 347  *
 348  * FUNCTION:    acpi_ex_create_table_region
 349  *
 350  * PARAMETERS:  walk_state          - Current state
 351  *
 352  * RETURN:      Status
 353  *
 354  * DESCRIPTION: Create a new data_table_region object
 355  *
 356  ******************************************************************************/
 357
 358 acpi_status acpi_ex_create_table_region(struct acpi_walk_state *walk_state)
 359 {
 360         acpi_status status;
 361         union acpi_operand_object **operand = &walk_state->operands[0];
 362         union acpi_operand_object *obj_desc;
 363         struct acpi_namespace_node *node;
 364         struct acpi_table_header *table;
 365         union acpi_operand_object *region_obj2;
 366
 367         ACPI_FUNCTION_TRACE("ex_create_table_region");
 368
 369         /* Get the Node from the object stack  */
 370
 371         node = walk_state->op->common.node;
 372
 373         /*
 374          * If the region object is already attached to this node,
 375          * just return
 376          */
 377         if (acpi_ns_get_attached_object(node)) {
 378                 return_ACPI_STATUS(AE_OK);
 379         }
 380
 381         /* Find the ACPI table */
 382
 383         status = acpi_tb_find_table(operand[1]->string.pointer,
 384                                     operand[2]->string.pointer,
 385                                     operand[3]->string.pointer, &table);
 386         if (ACPI_FAILURE(status)) {
 387                 return_ACPI_STATUS(status);
 388         }
 389
 390         /* Create the region descriptor */
 391
 392         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_REGION);
 393         if (!obj_desc) {
 394                 return_ACPI_STATUS(AE_NO_MEMORY);
 395         }
 396
 397         region_obj2 = obj_desc->common.next_object;
 398         region_obj2->extra.region_context = NULL;
 399
 400         /* Init the region from the operands */
 401
 402         obj_desc->region.space_id = REGION_DATA_TABLE;
 403         obj_desc->region.address =
 404             (acpi_physical_address) ACPI_TO_INTEGER(table);
 405         obj_desc->region.length = table->length;
 406         obj_desc->region.node = node;
 407         obj_desc->region.flags = AOPOBJ_DATA_VALID;
 408
 409         /* Install the new region object in the parent Node */
 410
 411         status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_REGION);
 412         if (ACPI_FAILURE(status)) {
 413                 goto cleanup;
 414         }
 415
 416         status = acpi_ev_initialize_region(obj_desc, FALSE);
 417         if (ACPI_FAILURE(status)) {
 418                 if (status == AE_NOT_EXIST) {
 419                         status = AE_OK;
 420                 } else {
 421                         goto cleanup;
 422                 }
 423         }
 424
 425         obj_desc->region.flags |= AOPOBJ_SETUP_COMPLETE;
 426
 427       cleanup:
 428
 429         /* Remove local reference to the object */
 430
 431         acpi_ut_remove_reference(obj_desc);
 432         return_ACPI_STATUS(status);
 433 }
 434
 435 /*******************************************************************************
 436  *
 437  * FUNCTION:    acpi_ex_create_processor
 438  *
 439  * PARAMETERS:  walk_state          - Current state
 440  *
 441  * RETURN:      Status
 442  *
 443  * DESCRIPTION: Create a new processor object and populate the fields
 444  *
 445  *              Processor (Name[0], cpu_iD[1], pblock_addr[2], pblock_length[3])
 446  *
 447  ******************************************************************************/
 448
 449 acpi_status acpi_ex_create_processor(struct acpi_walk_state *walk_state)
 450 {
 451         union acpi_operand_object **operand = &walk_state->operands[0];
 452         union acpi_operand_object *obj_desc;
 453         acpi_status status;
 454
 455         ACPI_FUNCTION_TRACE_PTR("ex_create_processor", walk_state);
 456
 457         /* Create the processor object */
 458
 459         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_PROCESSOR);
 460         if (!obj_desc) {
 461                 return_ACPI_STATUS(AE_NO_MEMORY);
 462         }
 463
 464         /* Initialize the processor object from the operands */
 465
 466         obj_desc->processor.proc_id = (u8) operand[1]->integer.value;
 467         obj_desc->processor.address =
 468             (acpi_io_address) operand[2]->integer.value;
 469         obj_desc->processor.length = (u8) operand[3]->integer.value;
 470
 471         /* Install the processor object in the parent Node */
 472
 473         status = acpi_ns_attach_object((struct acpi_namespace_node *)operand[0],
 474                                        obj_desc, ACPI_TYPE_PROCESSOR);
 475
 476         /* Remove local reference to the object */
 477
 478         acpi_ut_remove_reference(obj_desc);
 479         return_ACPI_STATUS(status);
 480 }
 481
 482 /*******************************************************************************
 483  *
 484  * FUNCTION:    acpi_ex_create_power_resource
 485  *
 486  * PARAMETERS:  walk_state          - Current state
 487  *
 488  * RETURN:      Status
 489  *
 490  * DESCRIPTION: Create a new power_resource object and populate the fields
 491  *
 492  *              power_resource (Name[0], system_level[1], resource_order[2])
 493  *
 494  ******************************************************************************/
 495
 496 acpi_status acpi_ex_create_power_resource(struct acpi_walk_state *walk_state)
 497 {
 498         union acpi_operand_object **operand = &walk_state->operands[0];
 499         acpi_status status;
 500         union acpi_operand_object *obj_desc;
 501
 502         ACPI_FUNCTION_TRACE_PTR("ex_create_power_resource", walk_state);
 503
 504         /* Create the power resource object */
 505
 506         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_POWER);
 507         if (!obj_desc) {
 508                 return_ACPI_STATUS(AE_NO_MEMORY);
 509         }
 510
 511         /* Initialize the power object from the operands */
 512
 513         obj_desc->power_resource.system_level = (u8) operand[1]->integer.value;
 514         obj_desc->power_resource.resource_order =
 515             (u16) operand[2]->integer.value;
 516
 517         /* Install the  power resource object in the parent Node */
 518
 519         status = acpi_ns_attach_object((struct acpi_namespace_node *)operand[0],
 520                                        obj_desc, ACPI_TYPE_POWER);
 521
 522         /* Remove local reference to the object */
 523
 524         acpi_ut_remove_reference(obj_desc);
 525         return_ACPI_STATUS(status);
 526 }
 527 #endif
 528
 529 /*******************************************************************************
 530  *
 531  * FUNCTION:    acpi_ex_create_method
 532  *
 533  * PARAMETERS:  aml_start       - First byte of the method's AML
 534  *              aml_length      - AML byte count for this method
 535  *              walk_state      - Current state
 536  *
 537  * RETURN:      Status
 538  *
 539  * DESCRIPTION: Create a new method object
 540  *
 541  ******************************************************************************/
 542
 543 acpi_status
 544 acpi_ex_create_method(u8 * aml_start,
 545                       u32 aml_length, struct acpi_walk_state *walk_state)
 546 {
 547         union acpi_operand_object **operand = &walk_state->operands[0];
 548         union acpi_operand_object *obj_desc;
 549         acpi_status status;
 550         u8 method_flags;
 551
 552         ACPI_FUNCTION_TRACE_PTR("ex_create_method", walk_state);
 553
 554         /* Create a new method object */
 555
 556         obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_METHOD);
 557         if (!obj_desc) {
 558                 return_ACPI_STATUS(AE_NO_MEMORY);
 559         }
 560
 561         /* Save the method's AML pointer and length  */
 562
 563         obj_desc->method.aml_start = aml_start;
 564         obj_desc->method.aml_length = aml_length;
 565
 566         /*
 567          * Disassemble the method flags.  Split off the Arg Count
 568          * for efficiency
 569          */
 570         method_flags = (u8) operand[1]->integer.value;
 571
 572         obj_desc->method.method_flags =
 573             (u8) (method_flags & ~AML_METHOD_ARG_COUNT);
 574         obj_desc->method.param_count =
 575             (u8) (method_flags & AML_METHOD_ARG_COUNT);
 576
 577         /*
 578          * Get the concurrency count.  If required, a semaphore will be
 579          * created for this method when it is parsed.
 580          */
 581         if (acpi_gbl_all_methods_serialized) {
 582                 obj_desc->method.concurrency = 1;
 583                 obj_desc->method.method_flags |= AML_METHOD_SERIALIZED;
 584         } else if (method_flags & AML_METHOD_SERIALIZED) {
 585                 /*
 586                  * ACPI 1.0: Concurrency = 1
 587                  * ACPI 2.0: Concurrency = (sync_level (in method declaration) + 1)
 588                  */
 589                 obj_desc->method.concurrency = (u8)
 590                     (((method_flags & AML_METHOD_SYNCH_LEVEL) >> 4) + 1);
 591         } else {
 592                 obj_desc->method.concurrency = ACPI_INFINITE_CONCURRENCY;
 593         }
 594
 595         /* Attach the new object to the method Node */
 596
 597         status = acpi_ns_attach_object((struct acpi_namespace_node *)operand[0],
 598                                        obj_desc, ACPI_TYPE_METHOD);
 599
 600         /* Remove local reference to the object */
 601
 602         acpi_ut_remove_reference(obj_desc);
 603
 604         /* Remove a reference to the operand */
 605
 606         acpi_ut_remove_reference(operand[1]);
 607         return_ACPI_STATUS(status);
 608 }