drivers/acpi/acpica/hwregs.c

   1
   2 /*******************************************************************************
   3  *
   4  * Module Name: hwregs - Read/write access functions for the various ACPI
   5  *                       control and status registers.
   6  *
   7  ******************************************************************************/
   8
   9 /*
  10  * Copyright (C) 2000 - 2008, Intel Corp.
  11  * All rights reserved.
  12  *
  13  * Redistribution and use in source and binary forms, with or without
  14  * modification, are permitted provided that the following conditions
  15  * are met:
  16  * 1. Redistributions of source code must retain the above copyright
  17  *    notice, this list of conditions, and the following disclaimer,
  18  *    without modification.
  19  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  20  *    substantially similar to the "NO WARRANTY" disclaimer below
  21  *    ("Disclaimer") and any redistribution must be conditioned upon
  22  *    including a substantially similar Disclaimer requirement for further
  23  *    binary redistribution.
  24  * 3. Neither the names of the above-listed copyright holders nor the names
  25  *    of any contributors may be used to endorse or promote products derived
  26  *    from this software without specific prior written permission.
  27  *
  28  * Alternatively, this software may be distributed under the terms of the
  29  * GNU General Public License ("GPL") version 2 as published by the Free
  30  * Software Foundation.
  31  *
  32  * NO WARRANTY
  33  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  34  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  35  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  36  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  37  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  38  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  39  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  40  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  41  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  42  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  43  * POSSIBILITY OF SUCH DAMAGES.
  44  */
  45
  46 #include <acpi/acpi.h>
  47 #include "accommon.h"
  48 #include "acnamesp.h"
  49 #include "acevents.h"
  50
  51 #define _COMPONENT          ACPI_HARDWARE
  52 ACPI_MODULE_NAME("hwregs")
  53
  54 /*******************************************************************************
  55  *
  56  * FUNCTION:    acpi_hw_clear_acpi_status
  57  *
  58  * PARAMETERS:  None
  59  *
  60  * RETURN:      Status
  61  *
  62  * DESCRIPTION: Clears all fixed and general purpose status bits
  63  *              THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
  64  *
  65  ******************************************************************************/
  66 acpi_status acpi_hw_clear_acpi_status(void)
  67 {
  68         acpi_status status;
  69         acpi_cpu_flags lock_flags = 0;
  70
  71         ACPI_FUNCTION_TRACE(hw_clear_acpi_status);
  72
  73         ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %04X\n",
  74                           ACPI_BITMASK_ALL_FIXED_STATUS,
  75                           (u16) acpi_gbl_FADT.xpm1a_event_block.address));
  76
  77         lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
  78
  79         status = acpi_hw_register_write(ACPI_REGISTER_PM1_STATUS,
  80                                         ACPI_BITMASK_ALL_FIXED_STATUS);
  81         if (ACPI_FAILURE(status)) {
  82                 goto unlock_and_exit;
  83         }
  84
  85         /* Clear the fixed events */
  86
  87         if (acpi_gbl_FADT.xpm1b_event_block.address) {
  88                 status = acpi_write(ACPI_BITMASK_ALL_FIXED_STATUS,
  89                                     &acpi_gbl_FADT.xpm1b_event_block);
  90                 if (ACPI_FAILURE(status)) {
  91                         goto unlock_and_exit;
  92                 }
  93         }
  94
  95         /* Clear the GPE Bits in all GPE registers in all GPE blocks */
  96
  97         status = acpi_ev_walk_gpe_list(acpi_hw_clear_gpe_block, NULL);
  98
  99       unlock_and_exit:
 100         acpi_os_release_lock(acpi_gbl_hardware_lock, lock_flags);
 101         return_ACPI_STATUS(status);
 102 }
 103
 104 /*******************************************************************************
 105  *
 106  * FUNCTION:    acpi_hw_get_register_bit_mask
 107  *
 108  * PARAMETERS:  register_id         - Index of ACPI Register to access
 109  *
 110  * RETURN:      The bitmask to be used when accessing the register
 111  *
 112  * DESCRIPTION: Map register_id into a register bitmask.
 113  *
 114  ******************************************************************************/
 115
 116 struct acpi_bit_register_info *acpi_hw_get_bit_register_info(u32 register_id)
 117 {
 118         ACPI_FUNCTION_ENTRY();
 119
 120         if (register_id > ACPI_BITREG_MAX) {
 121                 ACPI_ERROR((AE_INFO, "Invalid BitRegister ID: %X",
 122                             register_id));
 123                 return (NULL);
 124         }
 125
 126         return (&acpi_gbl_bit_register_info[register_id]);
 127 }
 128
 129 /******************************************************************************
 130  *
 131  * FUNCTION:    acpi_hw_register_read
 132  *
 133  * PARAMETERS:  register_id         - ACPI Register ID
 134  *              return_value        - Where the register value is returned
 135  *
 136  * RETURN:      Status and the value read.
 137  *
 138  * DESCRIPTION: Read from the specified ACPI register
 139  *
 140  ******************************************************************************/
 141 acpi_status
 142 acpi_hw_register_read(u32 register_id, u32 * return_value)
 143 {
 144         u32 value1 = 0;
 145         u32 value2 = 0;
 146         acpi_status status;
 147
 148         ACPI_FUNCTION_TRACE(hw_register_read);
 149
 150         switch (register_id) {
 151         case ACPI_REGISTER_PM1_STATUS:  /* 16-bit access */
 152
 153                 status = acpi_read(&value1, &acpi_gbl_FADT.xpm1a_event_block);
 154                 if (ACPI_FAILURE(status)) {
 155                         goto exit;
 156                 }
 157
 158                 /* PM1B is optional */
 159
 160                 status = acpi_read(&value2, &acpi_gbl_FADT.xpm1b_event_block);
 161                 value1 |= value2;
 162                 break;
 163
 164         case ACPI_REGISTER_PM1_ENABLE:  /* 16-bit access */
 165
 166                 status = acpi_read(&value1, &acpi_gbl_xpm1a_enable);
 167                 if (ACPI_FAILURE(status)) {
 168                         goto exit;
 169                 }
 170
 171                 /* PM1B is optional */
 172
 173                 status = acpi_read(&value2, &acpi_gbl_xpm1b_enable);
 174                 value1 |= value2;
 175                 break;
 176
 177         case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */
 178
 179                 status = acpi_read(&value1, &acpi_gbl_FADT.xpm1a_control_block);
 180                 if (ACPI_FAILURE(status)) {
 181                         goto exit;
 182                 }
 183
 184                 status = acpi_read(&value2, &acpi_gbl_FADT.xpm1b_control_block);
 185                 value1 |= value2;
 186                 break;
 187
 188         case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */
 189
 190                 status = acpi_read(&value1, &acpi_gbl_FADT.xpm2_control_block);
 191                 break;
 192
 193         case ACPI_REGISTER_PM_TIMER:    /* 32-bit access */
 194
 195                 status = acpi_read(&value1, &acpi_gbl_FADT.xpm_timer_block);
 196                 break;
 197
 198         case ACPI_REGISTER_SMI_COMMAND_BLOCK:   /* 8-bit access */
 199
 200                 status =
 201                     acpi_os_read_port(acpi_gbl_FADT.smi_command, &value1, 8);
 202                 break;
 203
 204         default:
 205                 ACPI_ERROR((AE_INFO, "Unknown Register ID: %X", register_id));
 206                 status = AE_BAD_PARAMETER;
 207                 break;
 208         }
 209
 210       exit:
 211
 212         if (ACPI_SUCCESS(status)) {
 213                 *return_value = value1;
 214         }
 215
 216         return_ACPI_STATUS(status);
 217 }
 218
 219 /******************************************************************************
 220  *
 221  * FUNCTION:    acpi_hw_register_write
 222  *
 223  * PARAMETERS:  register_id         - ACPI Register ID
 224  *              Value               - The value to write
 225  *
 226  * RETURN:      Status
 227  *
 228  * DESCRIPTION: Write to the specified ACPI register
 229  *
 230  * NOTE: In accordance with the ACPI specification, this function automatically
 231  * preserves the value of the following bits, meaning that these bits cannot be
 232  * changed via this interface:
 233  *
 234  * PM1_CONTROL[0] = SCI_EN
 235  * PM1_CONTROL[9]
 236  * PM1_STATUS[11]
 237  *
 238  * ACPI References:
 239  * 1) Hardware Ignored Bits: When software writes to a register with ignored
 240  *      bit fields, it preserves the ignored bit fields
 241  * 2) SCI_EN: OSPM always preserves this bit position
 242  *
 243  ******************************************************************************/
 244
 245 acpi_status acpi_hw_register_write(u32 register_id, u32 value)
 246 {
 247         acpi_status status;
 248         u32 read_value;
 249
 250         ACPI_FUNCTION_TRACE(hw_register_write);
 251
 252         switch (register_id) {
 253         case ACPI_REGISTER_PM1_STATUS:  /* 16-bit access */
 254
 255                 /* Perform a read first to preserve certain bits (per ACPI spec) */
 256
 257                 status = acpi_hw_register_read(ACPI_REGISTER_PM1_STATUS,
 258                                                &read_value);
 259                 if (ACPI_FAILURE(status)) {
 260                         goto exit;
 261                 }
 262
 263                 /* Insert the bits to be preserved */
 264
 265                 ACPI_INSERT_BITS(value, ACPI_PM1_STATUS_PRESERVED_BITS,
 266                                  read_value);
 267
 268                 /* Now we can write the data */
 269
 270                 status = acpi_write(value, &acpi_gbl_FADT.xpm1a_event_block);
 271                 if (ACPI_FAILURE(status)) {
 272                         goto exit;
 273                 }
 274
 275                 /* PM1B is optional */
 276
 277                 status = acpi_write(value, &acpi_gbl_FADT.xpm1b_event_block);
 278                 break;
 279
 280         case ACPI_REGISTER_PM1_ENABLE:  /* 16-bit access */
 281
 282                 status = acpi_write(value, &acpi_gbl_xpm1a_enable);
 283                 if (ACPI_FAILURE(status)) {
 284                         goto exit;
 285                 }
 286
 287                 /* PM1B is optional */
 288
 289                 status = acpi_write(value, &acpi_gbl_xpm1b_enable);
 290                 break;
 291
 292         case ACPI_REGISTER_PM1_CONTROL: /* 16-bit access */
 293
 294                 /*
 295                  * Perform a read first to preserve certain bits (per ACPI spec)
 296                  */
 297                 status = acpi_hw_register_read(ACPI_REGISTER_PM1_CONTROL,
 298                                                &read_value);
 299                 if (ACPI_FAILURE(status)) {
 300                         goto exit;
 301                 }
 302
 303                 /* Insert the bits to be preserved */
 304
 305                 ACPI_INSERT_BITS(value, ACPI_PM1_CONTROL_PRESERVED_BITS,
 306                                  read_value);
 307
 308                 /* Now we can write the data */
 309
 310                 status = acpi_write(value, &acpi_gbl_FADT.xpm1a_control_block);
 311                 if (ACPI_FAILURE(status)) {
 312                         goto exit;
 313                 }
 314
 315                 status = acpi_write(value, &acpi_gbl_FADT.xpm1b_control_block);
 316                 break;
 317
 318         case ACPI_REGISTER_PM1A_CONTROL:        /* 16-bit access */
 319
 320                 status = acpi_write(value, &acpi_gbl_FADT.xpm1a_control_block);
 321                 break;
 322
 323         case ACPI_REGISTER_PM1B_CONTROL:        /* 16-bit access */
 324
 325                 status = acpi_write(value, &acpi_gbl_FADT.xpm1b_control_block);
 326                 break;
 327
 328         case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */
 329
 330                 status = acpi_write(value, &acpi_gbl_FADT.xpm2_control_block);
 331                 break;
 332
 333         case ACPI_REGISTER_PM_TIMER:    /* 32-bit access */
 334
 335                 status = acpi_write(value, &acpi_gbl_FADT.xpm_timer_block);
 336                 break;
 337
 338         case ACPI_REGISTER_SMI_COMMAND_BLOCK:   /* 8-bit access */
 339
 340                 /* SMI_CMD is currently always in IO space */
 341
 342                 status =
 343                     acpi_os_write_port(acpi_gbl_FADT.smi_command, value, 8);
 344                 break;
 345
 346         default:
 347                 status = AE_BAD_PARAMETER;
 348                 break;
 349         }
 350
 351       exit:
 352         return_ACPI_STATUS(status);
 353 }