2 * Machine specific setup for generic
6 #include <linux/init.h>
7 #include <linux/interrupt.h>
9 #include <asm/arch_hooks.h>
11 #include <asm/setup.h>
15 #ifdef CONFIG_HOTPLUG_CPU
16 #define DEFAULT_SEND_IPI (1)
18 #define DEFAULT_SEND_IPI (0)
21 int no_broadcast
= DEFAULT_SEND_IPI
;
24 * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
27 * Perform any necessary interrupt initialisation prior to setting up
28 * the "ordinary" interrupt call gates. For legacy reasons, the ISA
29 * interrupts should be initialised here if the machine emulates a PC
32 void __init
pre_intr_init_hook(void)
34 if (x86_quirks
->arch_pre_intr_init
) {
35 if (x86_quirks
->arch_pre_intr_init())
42 * intr_init_hook - post gate setup interrupt initialisation
45 * Fill in any interrupts that may have been left out by the general
46 * init_IRQ() routine. interrupts having to do with the machine rather
47 * than the devices on the I/O bus (like APIC interrupts in intel MP
48 * systems) are started here.
50 void __init
intr_init_hook(void)
52 if (x86_quirks
->arch_intr_init
) {
53 if (x86_quirks
->arch_intr_init())
59 * pre_setup_arch_hook - hook called prior to any setup_arch() execution
62 * generally used to activate any machine specific identification
63 * routines that may be needed before setup_arch() runs. On Voyager
64 * this is used to get the board revision and type.
66 void __init
pre_setup_arch_hook(void)
71 * trap_init_hook - initialise system specific traps
74 * Called as the final act of trap_init(). Used in VISWS to initialise
75 * the various board specific APIC traps.
77 void __init
trap_init_hook(void)
79 if (x86_quirks
->arch_trap_init
) {
80 if (x86_quirks
->arch_trap_init())
85 static struct irqaction irq0
= {
86 .handler
= timer_interrupt
,
87 .flags
= IRQF_DISABLED
| IRQF_NOBALANCING
| IRQF_IRQPOLL
,
88 .mask
= CPU_MASK_NONE
,
93 * pre_time_init_hook - do any specific initialisations before.
96 void __init
pre_time_init_hook(void)
98 if (x86_quirks
->arch_pre_time_init
)
99 x86_quirks
->arch_pre_time_init();
103 * time_init_hook - do any specific initialisations for the system timer.
106 * Must plug the system timer interrupt source at HZ into the IRQ listed
107 * in irq_vectors.h:TIMER_IRQ
109 void __init
time_init_hook(void)
111 if (x86_quirks
->arch_time_init
) {
113 * A nonzero return code does not mean failure, it means
114 * that the architecture quirk does not want any
115 * generic (timer) setup to be performed after this:
117 if (x86_quirks
->arch_time_init())
121 irq0
.mask
= cpumask_of_cpu(0);
127 * mca_nmi_hook - hook into MCA specific NMI chain
130 * The MCA (Microchannel Architecture) has an NMI chain for NMI sources
131 * along the MCA bus. Use this to hook into that chain if you will need
134 void mca_nmi_hook(void)
136 /* If I recall correctly, there's a whole bunch of other things that
137 * we can do to check for NMI problems, but that's all I know about
141 printk("NMI generated from unknown source!\n");
145 static __init
int no_ipi_broadcast(char *str
)
147 get_option(&str
, &no_broadcast
);
148 printk ("Using %s mode\n", no_broadcast
? "No IPI Broadcast" :
153 __setup("no_ipi_broadcast=", no_ipi_broadcast
);
155 static int __init
print_ipi_mode(void)
157 printk ("Using IPI %s mode\n", no_broadcast
? "No-Shortcut" :
162 late_initcall(print_ipi_mode
);