arch/powerpc/platforms/maple/pci.c

   1 /*
   2  * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
   3  *                    IBM Corp.
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License
   7  * as published by the Free Software Foundation; either version
   8  * 2 of the License, or (at your option) any later version.
   9  */
  10
  11 #undef DEBUG
  12
  13 #include <linux/kernel.h>
  14 #include <linux/pci.h>
  15 #include <linux/delay.h>
  16 #include <linux/string.h>
  17 #include <linux/init.h>
  18 #include <linux/bootmem.h>
  19 #include <linux/irq.h>
  20
  21 #include <asm/sections.h>
  22 #include <asm/io.h>
  23 #include <asm/prom.h>
  24 #include <asm/pci-bridge.h>
  25 #include <asm/machdep.h>
  26 #include <asm/iommu.h>
  27 #include <asm/ppc-pci.h>
  28
  29 #include "maple.h"
  30
  31 #ifdef DEBUG
  32 #define DBG(x...) printk(x)
  33 #else
  34 #define DBG(x...)
  35 #endif
  36
  37 static struct pci_controller *u3_agp, *u3_ht, *u4_pcie;
  38
  39 static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
  40 {
  41         for (; node != 0;node = node->sibling) {
  42                 const int *bus_range;
  43                 const unsigned int *class_code;
  44                 int len;
  45
  46                 /* For PCI<->PCI bridges or CardBus bridges, we go down */
  47                 class_code = of_get_property(node, "class-code", NULL);
  48                 if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
  49                         (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
  50                         continue;
  51                 bus_range = of_get_property(node, "bus-range", &len);
  52                 if (bus_range != NULL && len > 2 * sizeof(int)) {
  53                         if (bus_range[1] > higher)
  54                                 higher = bus_range[1];
  55                 }
  56                 higher = fixup_one_level_bus_range(node->child, higher);
  57         }
  58         return higher;
  59 }
  60
  61 /* This routine fixes the "bus-range" property of all bridges in the
  62  * system since they tend to have their "last" member wrong on macs
  63  *
  64  * Note that the bus numbers manipulated here are OF bus numbers, they
  65  * are not Linux bus numbers.
  66  */
  67 static void __init fixup_bus_range(struct device_node *bridge)
  68 {
  69         int *bus_range;
  70         struct property *prop;
  71         int len;
  72
  73         /* Lookup the "bus-range" property for the hose */
  74         prop = of_find_property(bridge, "bus-range", &len);
  75         if (prop == NULL  || prop->value == NULL || len < 2 * sizeof(int)) {
  76                 printk(KERN_WARNING "Can't get bus-range for %s\n",
  77                                bridge->full_name);
  78                 return;
  79         }
  80         bus_range = prop->value;
  81         bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
  82 }
  83
  84
  85 static unsigned long u3_agp_cfa0(u8 devfn, u8 off)
  86 {
  87         return (1 << (unsigned long)PCI_SLOT(devfn)) |
  88                 ((unsigned long)PCI_FUNC(devfn) << 8) |
  89                 ((unsigned long)off & 0xFCUL);
  90 }
  91
  92 static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off)
  93 {
  94         return ((unsigned long)bus << 16) |
  95                 ((unsigned long)devfn << 8) |
  96                 ((unsigned long)off & 0xFCUL) |
  97                 1UL;
  98 }
  99
 100 static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose,
 101                                        u8 bus, u8 dev_fn, u8 offset)
 102 {
 103         unsigned int caddr;
 104
 105         if (bus == hose->first_busno) {
 106                 if (dev_fn < (11 << 3))
 107                         return NULL;
 108                 caddr = u3_agp_cfa0(dev_fn, offset);
 109         } else
 110                 caddr = u3_agp_cfa1(bus, dev_fn, offset);
 111
 112         /* Uninorth will return garbage if we don't read back the value ! */
 113         do {
 114                 out_le32(hose->cfg_addr, caddr);
 115         } while (in_le32(hose->cfg_addr) != caddr);
 116
 117         offset &= 0x07;
 118         return hose->cfg_data + offset;
 119 }
 120
 121 static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
 122                               int offset, int len, u32 *val)
 123 {
 124         struct pci_controller *hose;
 125         volatile void __iomem *addr;
 126
 127         hose = pci_bus_to_host(bus);
 128         if (hose == NULL)
 129                 return PCIBIOS_DEVICE_NOT_FOUND;
 130
 131         addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
 132         if (!addr)
 133                 return PCIBIOS_DEVICE_NOT_FOUND;
 134         /*
 135          * Note: the caller has already checked that offset is
 136          * suitably aligned and that len is 1, 2 or 4.
 137          */
 138         switch (len) {
 139         case 1:
 140                 *val = in_8(addr);
 141                 break;
 142         case 2:
 143                 *val = in_le16(addr);
 144                 break;
 145         default:
 146                 *val = in_le32(addr);
 147                 break;
 148         }
 149         return PCIBIOS_SUCCESSFUL;
 150 }
 151
 152 static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
 153                                int offset, int len, u32 val)
 154 {
 155         struct pci_controller *hose;
 156         volatile void __iomem *addr;
 157
 158         hose = pci_bus_to_host(bus);
 159         if (hose == NULL)
 160                 return PCIBIOS_DEVICE_NOT_FOUND;
 161
 162         addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
 163         if (!addr)
 164                 return PCIBIOS_DEVICE_NOT_FOUND;
 165         /*
 166          * Note: the caller has already checked that offset is
 167          * suitably aligned and that len is 1, 2 or 4.
 168          */
 169         switch (len) {
 170         case 1:
 171                 out_8(addr, val);
 172                 break;
 173         case 2:
 174                 out_le16(addr, val);
 175                 break;
 176         default:
 177                 out_le32(addr, val);
 178                 break;
 179         }
 180         return PCIBIOS_SUCCESSFUL;
 181 }
 182
 183 static struct pci_ops u3_agp_pci_ops =
 184 {
 185         .read = u3_agp_read_config,
 186         .write = u3_agp_write_config,
 187 };
 188
 189 static unsigned long u3_ht_cfa0(u8 devfn, u8 off)
 190 {
 191         return (devfn << 8) | off;
 192 }
 193
 194 static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off)
 195 {
 196         return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL;
 197 }
 198
 199 static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
 200                                       u8 bus, u8 devfn, u8 offset)
 201 {
 202         if (bus == hose->first_busno) {
 203                 if (PCI_SLOT(devfn) == 0)
 204                         return NULL;
 205                 return hose->cfg_data + u3_ht_cfa0(devfn, offset);
 206         } else
 207                 return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
 208 }
 209
 210 static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
 211                                   int len, u32 *val)
 212 {
 213         volatile void __iomem *addr;
 214
 215         addr = hose->cfg_addr;
 216         addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
 217
 218         switch (len) {
 219         case 1:
 220                 *val = in_8(addr);
 221                 break;
 222         case 2:
 223                 *val = in_be16(addr);
 224                 break;
 225         default:
 226                 *val = in_be32(addr);
 227                 break;
 228         }
 229
 230         return PCIBIOS_SUCCESSFUL;
 231 }
 232
 233 static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
 234                                   int len, u32 val)
 235 {
 236         volatile void __iomem *addr;
 237
 238         addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
 239
 240         if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
 241                 return PCIBIOS_SUCCESSFUL;
 242
 243         switch (len) {
 244         case 1:
 245                 out_8(addr, val);
 246                 break;
 247         case 2:
 248                 out_be16(addr, val);
 249                 break;
 250         default:
 251                 out_be32(addr, val);
 252                 break;
 253         }
 254
 255         return PCIBIOS_SUCCESSFUL;
 256 }
 257
 258 static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
 259                              int offset, int len, u32 *val)
 260 {
 261         struct pci_controller *hose;
 262         volatile void __iomem *addr;
 263
 264         hose = pci_bus_to_host(bus);
 265         if (hose == NULL)
 266                 return PCIBIOS_DEVICE_NOT_FOUND;
 267
 268         if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
 269                 return u3_ht_root_read_config(hose, offset, len, val);
 270
 271         if (offset > 0xff)
 272                 return PCIBIOS_BAD_REGISTER_NUMBER;
 273
 274         addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
 275         if (!addr)
 276                 return PCIBIOS_DEVICE_NOT_FOUND;
 277
 278         /*
 279          * Note: the caller has already checked that offset is
 280          * suitably aligned and that len is 1, 2 or 4.
 281          */
 282         switch (len) {
 283         case 1:
 284                 *val = in_8(addr);
 285                 break;
 286         case 2:
 287                 *val = in_le16(addr);
 288                 break;
 289         default:
 290                 *val = in_le32(addr);
 291                 break;
 292         }
 293         return PCIBIOS_SUCCESSFUL;
 294 }
 295
 296 static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
 297                               int offset, int len, u32 val)
 298 {
 299         struct pci_controller *hose;
 300         volatile void __iomem *addr;
 301
 302         hose = pci_bus_to_host(bus);
 303         if (hose == NULL)
 304                 return PCIBIOS_DEVICE_NOT_FOUND;
 305
 306         if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
 307                 return u3_ht_root_write_config(hose, offset, len, val);
 308
 309         if (offset > 0xff)
 310                 return PCIBIOS_BAD_REGISTER_NUMBER;
 311
 312         addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
 313         if (!addr)
 314                 return PCIBIOS_DEVICE_NOT_FOUND;
 315         /*
 316          * Note: the caller has already checked that offset is
 317          * suitably aligned and that len is 1, 2 or 4.
 318          */
 319         switch (len) {
 320         case 1:
 321                 out_8(addr, val);
 322                 break;
 323         case 2:
 324                 out_le16(addr, val);
 325                 break;
 326         default:
 327                 out_le32(addr, val);
 328                 break;
 329         }
 330         return PCIBIOS_SUCCESSFUL;
 331 }
 332
 333 static struct pci_ops u3_ht_pci_ops =
 334 {
 335         .read = u3_ht_read_config,
 336         .write = u3_ht_write_config,
 337 };
 338
 339 static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off)
 340 {
 341         return (1 << PCI_SLOT(devfn))   |
 342                (PCI_FUNC(devfn) << 8)   |
 343                ((off >> 8) << 28)       |
 344                (off & 0xfcu);
 345 }
 346
 347 static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn,
 348                                  unsigned int off)
 349 {
 350         return (bus << 16)              |
 351                (devfn << 8)             |
 352                ((off >> 8) << 28)       |
 353                (off & 0xfcu)            | 1u;
 354 }
 355
 356 static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose,
 357                                         u8 bus, u8 dev_fn, int offset)
 358 {
 359         unsigned int caddr;
 360
 361         if (bus == hose->first_busno)
 362                 caddr = u4_pcie_cfa0(dev_fn, offset);
 363         else
 364                 caddr = u4_pcie_cfa1(bus, dev_fn, offset);
 365
 366         /* Uninorth will return garbage if we don't read back the value ! */
 367         do {
 368                 out_le32(hose->cfg_addr, caddr);
 369         } while (in_le32(hose->cfg_addr) != caddr);
 370
 371         offset &= 0x03;
 372         return hose->cfg_data + offset;
 373 }
 374
 375 static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
 376                                int offset, int len, u32 *val)
 377 {
 378         struct pci_controller *hose;
 379         volatile void __iomem *addr;
 380
 381         hose = pci_bus_to_host(bus);
 382         if (hose == NULL)
 383                 return PCIBIOS_DEVICE_NOT_FOUND;
 384         if (offset >= 0x1000)
 385                 return  PCIBIOS_BAD_REGISTER_NUMBER;
 386         addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
 387         if (!addr)
 388                 return PCIBIOS_DEVICE_NOT_FOUND;
 389         /*
 390          * Note: the caller has already checked that offset is
 391          * suitably aligned and that len is 1, 2 or 4.
 392          */
 393         switch (len) {
 394         case 1:
 395                 *val = in_8(addr);
 396                 break;
 397         case 2:
 398                 *val = in_le16(addr);
 399                 break;
 400         default:
 401                 *val = in_le32(addr);
 402                 break;
 403         }
 404         return PCIBIOS_SUCCESSFUL;
 405 }
 406 static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
 407                                 int offset, int len, u32 val)
 408 {
 409         struct pci_controller *hose;
 410         volatile void __iomem *addr;
 411
 412         hose = pci_bus_to_host(bus);
 413         if (hose == NULL)
 414                 return PCIBIOS_DEVICE_NOT_FOUND;
 415         if (offset >= 0x1000)
 416                 return  PCIBIOS_BAD_REGISTER_NUMBER;
 417         addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
 418         if (!addr)
 419                 return PCIBIOS_DEVICE_NOT_FOUND;
 420         /*
 421          * Note: the caller has already checked that offset is
 422          * suitably aligned and that len is 1, 2 or 4.
 423          */
 424         switch (len) {
 425         case 1:
 426                 out_8(addr, val);
 427                 break;
 428         case 2:
 429                 out_le16(addr, val);
 430                 break;
 431         default:
 432                 out_le32(addr, val);
 433                 break;
 434         }
 435         return PCIBIOS_SUCCESSFUL;
 436 }
 437
 438 static struct pci_ops u4_pcie_pci_ops =
 439 {
 440         .read = u4_pcie_read_config,
 441         .write = u4_pcie_write_config,
 442 };
 443
 444 static void __init setup_u3_agp(struct pci_controller* hose)
 445 {
 446         /* On G5, we move AGP up to high bus number so we don't need
 447          * to reassign bus numbers for HT. If we ever have P2P bridges
 448          * on AGP, we'll have to move pci_assign_all_buses to the
 449          * pci_controller structure so we enable it for AGP and not for
 450          * HT childs.
 451          * We hard code the address because of the different size of
 452          * the reg address cell, we shall fix that by killing struct
 453          * reg_property and using some accessor functions instead
 454          */
 455         hose->first_busno = 0xf0;
 456         hose->last_busno = 0xff;
 457         hose->ops = &u3_agp_pci_ops;
 458         hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
 459         hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
 460
 461         u3_agp = hose;
 462 }
 463
 464 static void __init setup_u4_pcie(struct pci_controller* hose)
 465 {
 466         /* We currently only implement the "non-atomic" config space, to
 467          * be optimised later.
 468          */
 469         hose->ops = &u4_pcie_pci_ops;
 470         hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
 471         hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
 472
 473         u4_pcie = hose;
 474 }
 475
 476 static void __init setup_u3_ht(struct pci_controller* hose)
 477 {
 478         hose->ops = &u3_ht_pci_ops;
 479
 480         /* We hard code the address because of the different size of
 481          * the reg address cell, we shall fix that by killing struct
 482          * reg_property and using some accessor functions instead
 483          */
 484         hose->cfg_data = ioremap(0xf2000000, 0x02000000);
 485         hose->cfg_addr = ioremap(0xf8070000, 0x1000);
 486
 487         hose->first_busno = 0;
 488         hose->last_busno = 0xef;
 489
 490         u3_ht = hose;
 491 }
 492
 493 static int __init maple_add_bridge(struct device_node *dev)
 494 {
 495         int len;
 496         struct pci_controller *hose;
 497         char* disp_name;
 498         const int *bus_range;
 499         int primary = 1;
 500
 501         DBG("Adding PCI host bridge %s\n", dev->full_name);
 502
 503         bus_range = of_get_property(dev, "bus-range", &len);
 504         if (bus_range == NULL || len < 2 * sizeof(int)) {
 505                 printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
 506                 dev->full_name);
 507         }
 508
 509         hose = pcibios_alloc_controller(dev);
 510         if (hose == NULL)
 511                 return -ENOMEM;
 512         hose->first_busno = bus_range ? bus_range[0] : 0;
 513         hose->last_busno = bus_range ? bus_range[1] : 0xff;
 514
 515         disp_name = NULL;
 516         if (of_device_is_compatible(dev, "u3-agp")) {
 517                 setup_u3_agp(hose);
 518                 disp_name = "U3-AGP";
 519                 primary = 0;
 520         } else if (of_device_is_compatible(dev, "u3-ht")) {
 521                 setup_u3_ht(hose);
 522                 disp_name = "U3-HT";
 523                 primary = 1;
 524         } else if (of_device_is_compatible(dev, "u4-pcie")) {
 525                 setup_u4_pcie(hose);
 526                 disp_name = "U4-PCIE";
 527                 primary = 0;
 528         }
 529         printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
 530                 disp_name, hose->first_busno, hose->last_busno);
 531
 532         /* Interpret the "ranges" property */
 533         /* This also maps the I/O region and sets isa_io/mem_base */
 534         pci_process_bridge_OF_ranges(hose, dev, primary);
 535
 536         /* Fixup "bus-range" OF property */
 537         fixup_bus_range(dev);
 538
 539         /* Check for legacy IOs */
 540         isa_bridge_find_early(hose);
 541
 542         return 0;
 543 }
 544
 545
 546 void __devinit maple_pci_irq_fixup(struct pci_dev *dev)
 547 {
 548         DBG(" -> maple_pci_irq_fixup\n");
 549
 550         /* Fixup IRQ for PCIe host */
 551         if (u4_pcie != NULL && dev->bus->number == 0 &&
 552             pci_bus_to_host(dev->bus) == u4_pcie) {
 553                 printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n");
 554                 dev->irq = irq_create_mapping(NULL, 1);
 555                 if (dev->irq != NO_IRQ)
 556                         irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
 557         }
 558
 559         /* Hide AMD8111 IDE interrupt when in legacy mode so
 560          * the driver calls pci_get_legacy_ide_irq()
 561          */
 562         if (dev->vendor == PCI_VENDOR_ID_AMD &&
 563             dev->device == PCI_DEVICE_ID_AMD_8111_IDE &&
 564             (dev->class & 5) != 5) {
 565                 dev->irq = NO_IRQ;
 566         }
 567
 568         DBG(" <- maple_pci_irq_fixup\n");
 569 }
 570
 571 void __init maple_pci_init(void)
 572 {
 573         struct device_node *np, *root;
 574         struct device_node *ht = NULL;
 575
 576         /* Probe root PCI hosts, that is on U3 the AGP host and the
 577          * HyperTransport host. That one is actually "kept" around
 578          * and actually added last as it's resource management relies
 579          * on the AGP resources to have been setup first
 580          */
 581         root = of_find_node_by_path("/");
 582         if (root == NULL) {
 583                 printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n");
 584                 return;
 585         }
 586         for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
 587                 if (!np->type)
 588                         continue;
 589                 if (strcmp(np->type, "pci") && strcmp(np->type, "ht"))
 590                         continue;
 591                 if ((of_device_is_compatible(np, "u4-pcie") ||
 592                      of_device_is_compatible(np, "u3-agp")) &&
 593                     maple_add_bridge(np) == 0)
 594                         of_node_get(np);
 595
 596                 if (of_device_is_compatible(np, "u3-ht")) {
 597                         of_node_get(np);
 598                         ht = np;
 599                 }
 600         }
 601         of_node_put(root);
 602
 603         /* Now setup the HyperTransport host if we found any
 604          */
 605         if (ht && maple_add_bridge(ht) != 0)
 606                 of_node_put(ht);
 607
 608         /* Setup the linkage between OF nodes and PHBs */
 609         pci_devs_phb_init();
 610
 611         /* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
 612          * assume there is no P2P bridge on the AGP bus, which should be a
 613          * safe assumptions hopefully.
 614          */
 615         if (u3_agp) {
 616                 struct device_node *np = u3_agp->dn;
 617                 PCI_DN(np)->busno = 0xf0;
 618                 for (np = np->child; np; np = np->sibling)
 619                         PCI_DN(np)->busno = 0xf0;
 620         }
 621
 622         /* Tell pci.c to not change any resource allocations.  */
 623         pci_add_flags(PCI_PROBE_ONLY);
 624 }
 625
 626 int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
 627 {
 628         struct device_node *np;
 629         unsigned int defirq = channel ? 15 : 14;
 630         unsigned int irq;
 631
 632         if (pdev->vendor != PCI_VENDOR_ID_AMD ||
 633             pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
 634                 return defirq;
 635
 636         np = pci_device_to_OF_node(pdev);
 637         if (np == NULL) {
 638                 printk("Failed to locate OF node for IDE %s\n",
 639                        pci_name(pdev));
 640                 return defirq;
 641         }
 642         irq = irq_of_parse_and_map(np, channel & 0x1);
 643         if (irq == NO_IRQ) {
 644                 printk("Failed to map onboard IDE interrupt for channel %d\n",
 645                        channel);
 646                 return defirq;
 647         }
 648         return irq;
 649 }
 650
 651 static void __devinit quirk_ipr_msi(struct pci_dev *dev)
 652 {
 653         /* Something prevents MSIs from the IPR from working on Bimini,
 654          * and the driver has no smarts to recover. So disable MSI
 655          * on it for now. */
 656
 657         if (machine_is(maple)) {
 658                 dev->no_msi = 1;
 659                 dev_info(&dev->dev, "Quirk disabled MSI\n");
 660         }
 661 }
 662 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
 663                         quirk_ipr_msi);