arch/powerpc/platforms/8xx/Kconfig

   1 config FADS
   2         bool
   3
   4 config CPM1
   5         bool
   6         select CPM
   7
   8 choice
   9         prompt "8xx Machine Type"
  10         depends on PPC_8xx
  11         depends on 8xx
  12         default MPC885ADS
  13
  14 config MPC8XXFADS
  15         bool "FADS"
  16         select FADS
  17
  18 config MPC86XADS
  19         bool "MPC86XADS"
  20         select CPM1
  21         help
  22           MPC86x Application Development System by Freescale Semiconductor.
  23           The MPC86xADS is meant to serve as a platform for s/w and h/w
  24           development around the MPC86X processor families.
  25
  26 config MPC885ADS
  27         bool "MPC885ADS"
  28         select CPM1
  29         select OF_DYNAMIC
  30         help
  31           Freescale Semiconductor MPC885 Application Development System (ADS).
  32           Also known as DUET.
  33           The MPC885ADS is meant to serve as a platform for s/w and h/w
  34           development around the MPC885 processor family.
  35
  36 config PPC_EP88XC
  37         bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
  38         select CPM1
  39         help
  40           This enables support for the Embedded Planet EP88xC board.
  41
  42           This board is also resold by Freescale as the QUICCStart
  43           MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
  44
  45 config PPC_ADDER875
  46         bool "Analogue & Micro Adder 875"
  47         select CPM1
  48         select REDBOOT
  49         help
  50           This enables support for the Analogue & Micro Adder 875
  51           board.
  52
  53 config TQM8XX
  54         bool "TQM8XX"
  55         select CPM1
  56         help
  57           support for the mpc8xx based boards from TQM.
  58
  59 endchoice
  60
  61 menu "Freescale Ethernet driver platform-specific options"
  62         depends on (FS_ENET && MPC885ADS)
  63
  64         config MPC8xx_SECOND_ETH
  65         bool "Second Ethernet channel"
  66         depends on MPC885ADS
  67         default y
  68         help
  69           This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
  70           The latter will use SCC1, for 885ADS you can select it below.
  71
  72         choice
  73                 prompt "Second Ethernet channel"
  74                 depends on MPC8xx_SECOND_ETH
  75                 default MPC8xx_SECOND_ETH_FEC2
  76
  77                 config MPC8xx_SECOND_ETH_FEC2
  78                 bool "FEC2"
  79                 depends on MPC885ADS
  80                 help
  81                   Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
  82                   (often 2-nd UART) will not work if this is enabled.
  83
  84                 config MPC8xx_SECOND_ETH_SCC3
  85                 bool "SCC3"
  86                 depends on MPC885ADS
  87                 help
  88                   Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
  89                   (often 1-nd UART) will not work if this is enabled.
  90
  91         endchoice
  92
  93 endmenu
  94
  95 #
  96 # MPC8xx Communication options
  97 #
  98
  99 menu "MPC8xx CPM Options"
 100         depends on 8xx
 101
 102 # This doesn't really belong here, but it is convenient to ask
 103 # 8xx specific questions.
 104 comment "Generic MPC8xx Options"
 105
 106 config 8xx_COPYBACK
 107         bool "Copy-Back Data Cache (else Writethrough)"
 108         help
 109           Saying Y here will cause the cache on an MPC8xx processor to be used
 110           in Copy-Back mode.  If you say N here, it is used in Writethrough
 111           mode.
 112
 113           If in doubt, say Y here.
 114
 115 config 8xx_GPIO
 116         bool "GPIO API Support"
 117         select ARCH_REQUIRE_GPIOLIB
 118         help
 119           Saying Y here will cause the ports on an MPC8xx processor to be used
 120           with the GPIO API.  If you say N here, the kernel needs less memory.
 121
 122           If in doubt, say Y here.
 123
 124 config 8xx_CPU6
 125         bool "CPU6 Silicon Errata (860 Pre Rev. C)"
 126         help
 127           MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
 128           require workarounds for Linux (and most other OSes to work).  If you
 129           get a BUG() very early in boot, this might fix the problem.  For
 130           more details read the document entitled "MPC860 Family Device Errata
 131           Reference" on Freescale's website.  This option also incurs a
 132           performance hit.
 133
 134           If in doubt, say N here.
 135
 136 config 8xx_CPU15
 137         bool "CPU15 Silicon Errata"
 138         default y
 139         help
 140           This enables a workaround for erratum CPU15 on MPC8xx chips.
 141           This bug can cause incorrect code execution under certain
 142           circumstances.  This workaround adds some overhead (a TLB miss
 143           every time execution crosses a page boundary), and you may wish
 144           to disable it if you have worked around the bug in the compiler
 145           (by not placing conditional branches or branches to LR or CTR
 146           in the last word of a page, with a target of the last cache
 147           line in the next page), or if you have used some other
 148           workaround.
 149
 150           If in doubt, say Y here.
 151
 152 choice
 153         prompt "Microcode patch selection"
 154         default NO_UCODE_PATCH
 155         help
 156           Help not implemented yet, coming soon.
 157
 158 config NO_UCODE_PATCH
 159         bool "None"
 160
 161 config USB_SOF_UCODE_PATCH
 162         bool "USB SOF patch"
 163         help
 164           Help not implemented yet, coming soon.
 165
 166 config I2C_SPI_UCODE_PATCH
 167         bool "I2C/SPI relocation patch"
 168         help
 169           Help not implemented yet, coming soon.
 170
 171 config I2C_SPI_SMC1_UCODE_PATCH
 172         bool "I2C/SPI/SMC1 relocation patch"
 173         help
 174           Help not implemented yet, coming soon.
 175
 176 endchoice
 177
 178 config UCODE_PATCH
 179         bool
 180         default y
 181         depends on !NO_UCODE_PATCH
 182
 183 endmenu