[POWERPC] Remove ioremap64 and fixup_bigphys_addr

[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / powerpc / kernel / setup_64.c

/*
 * 
 * Common boot and setup code.
 *
 * Copyright (C) 2001 PPC64 Team, IBM Corp
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 */

#undef DEBUG

#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/utsname.h>
#include <linux/tty.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/unistd.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/kdump.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/machdep.h>
#include <asm/paca.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/lmb.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
#include <asm/kexec.h>

#include "setup.h"

#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif

int have_of = 1;
int boot_cpuid = 0;
u64 ppc64_pft_size;

/* Pick defaults since we might want to patch instructions
 * before we've read this from the device tree.
 */
struct ppc64_caches ppc64_caches = {
        .dline_size = 0x40,
        .log_dline_size = 6,
        .iline_size = 0x40,
        .log_iline_size = 6
};
EXPORT_SYMBOL_GPL(ppc64_caches);

/*
 * These are used in binfmt_elf.c to put aux entries on the stack
 * for each elf executable being started.
 */
int dcache_bsize;
int icache_bsize;
int ucache_bsize;

#ifdef CONFIG_SMP

static int smt_enabled_cmdline;

/* Look for ibm,smt-enabled OF option */
static void check_smt_enabled(void)
{
        struct device_node *dn;
        const char *smt_option;

        /* Allow the command line to overrule the OF option */
        if (smt_enabled_cmdline)
                return;

        dn = of_find_node_by_path("/options");

        if (dn) {
                smt_option = get_property(dn, "ibm,smt-enabled", NULL);

                if (smt_option) {
                        if (!strcmp(smt_option, "on"))
                                smt_enabled_at_boot = 1;
                        else if (!strcmp(smt_option, "off"))
                                smt_enabled_at_boot = 0;
                }
        }
}

/* Look for smt-enabled= cmdline option */
static int __init early_smt_enabled(char *p)
{
        smt_enabled_cmdline = 1;

        if (!p)
                return 0;

        if (!strcmp(p, "on") || !strcmp(p, "1"))
                smt_enabled_at_boot = 1;
        else if (!strcmp(p, "off") || !strcmp(p, "0"))
                smt_enabled_at_boot = 0;

        return 0;
}
early_param("smt-enabled", early_smt_enabled);

#else
#define check_smt_enabled()
#endif /* CONFIG_SMP */

/* Put the paca pointer into r13 and SPRG3 */
void __init setup_paca(int cpu)
{
        local_paca = &paca[cpu];
        mtspr(SPRN_SPRG3, local_paca);
}

/*
 * Early initialization entry point. This is called by head.S
 * with MMU translation disabled. We rely on the "feature" of
 * the CPU that ignores the top 2 bits of the address in real
 * mode so we can access kernel globals normally provided we
 * only toy with things in the RMO region. From here, we do
 * some early parsing of the device-tree to setup out LMB
 * data structures, and allocate & initialize the hash table
 * and segment tables so we can start running with translation
 * enabled.
 *
 * It is this function which will call the probe() callback of
 * the various platform types and copy the matching one to the
 * global ppc_md structure. Your platform can eventually do
 * some very early initializations from the probe() routine, but
 * this is not recommended, be very careful as, for example, the
 * device-tree is not accessible via normal means at this point.
 */

void __init early_setup(unsigned long dt_ptr)
{
        /* Identify CPU type */
        identify_cpu(0);

        /* Assume we're on cpu 0 for now. Don't write to the paca yet! */
        setup_paca(0);

        /* Enable early debugging if any specified (see udbg.h) */
        udbg_early_init();

        DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);

        /*
         * Do early initializations using the flattened device
         * tree, like retreiving the physical memory map or
         * calculating/retreiving the hash table size
         */
        early_init_devtree(__va(dt_ptr));

        /* Now we know the logical id of our boot cpu, setup the paca. */
        setup_paca(boot_cpuid);

        /* Fix up paca fields required for the boot cpu */
        get_paca()->cpu_start = 1;
        get_paca()->stab_real = __pa((u64)&initial_stab);
        get_paca()->stab_addr = (u64)&initial_stab;

        /* Probe the machine type */
        probe_machine();

        setup_kdump_trampoline();

        DBG("Found, Initializing memory management...\n");

        /*
         * Initialize the MMU Hash table and create the linear mapping
         * of memory. Has to be done before stab/slb initialization as
         * this is currently where the page size encoding is obtained
         */
        htab_initialize();

        /*
         * Initialize stab / SLB management except on iSeries
         */
        if (cpu_has_feature(CPU_FTR_SLB))
                slb_initialize();
        else if (!firmware_has_feature(FW_FEATURE_ISERIES))
                stab_initialize(get_paca()->stab_real);

        DBG(" <- early_setup()\n");
}

#ifdef CONFIG_SMP
void early_setup_secondary(void)
{
        struct paca_struct *lpaca = get_paca();

        /* Mark interrupts enabled in PACA */
        lpaca->soft_enabled = 0;

        /* Initialize hash table for that CPU */
        htab_initialize_secondary();

        /* Initialize STAB/SLB. We use a virtual address as it works
         * in real mode on pSeries and we want a virutal address on
         * iSeries anyway
         */
        if (cpu_has_feature(CPU_FTR_SLB))
                slb_initialize();
        else
                stab_initialize(lpaca->stab_addr);
}

#endif /* CONFIG_SMP */

#if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
void smp_release_cpus(void)
{
        extern unsigned long __secondary_hold_spinloop;
        unsigned long *ptr;

        DBG(" -> smp_release_cpus()\n");

        /* All secondary cpus are spinning on a common spinloop, release them
         * all now so they can start to spin on their individual paca
         * spinloops. For non SMP kernels, the secondary cpus never get out
         * of the common spinloop.
         * This is useless but harmless on iSeries, secondaries are already
         * waiting on their paca spinloops. */

        ptr  = (unsigned long *)((unsigned long)&__secondary_hold_spinloop
                        - PHYSICAL_START);
        *ptr = 1;
        mb();

        DBG(" <- smp_release_cpus()\n");
}
#endif /* CONFIG_SMP || CONFIG_KEXEC */

/*
 * Initialize some remaining members of the ppc64_caches and systemcfg
 * structures
 * (at least until we get rid of them completely). This is mostly some
 * cache informations about the CPU that will be used by cache flush
 * routines and/or provided to userland
 */
static void __init initialize_cache_info(void)
{
        struct device_node *np;
        unsigned long num_cpus = 0;

        DBG(" -> initialize_cache_info()\n");

        for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) {
                num_cpus += 1;

                /* We're assuming *all* of the CPUs have the same
                 * d-cache and i-cache sizes... -Peter
                 */

                if ( num_cpus == 1 ) {
                        const u32 *sizep, *lsizep;
                        u32 size, lsize;
                        const char *dc, *ic;

                        /* Then read cache informations */
                        if (machine_is(powermac)) {
                                dc = "d-cache-block-size";
                                ic = "i-cache-block-size";
                        } else {
                                dc = "d-cache-line-size";
                                ic = "i-cache-line-size";
                        }

                        size = 0;
                        lsize = cur_cpu_spec->dcache_bsize;
                        sizep = get_property(np, "d-cache-size", NULL);
                        if (sizep != NULL)
                                size = *sizep;
                        lsizep = get_property(np, dc, NULL);
                        if (lsizep != NULL)
                                lsize = *lsizep;
                        if (sizep == 0 || lsizep == 0)
                                DBG("Argh, can't find dcache properties ! "
                                    "sizep: %p, lsizep: %p\n", sizep, lsizep);

                        ppc64_caches.dsize = size;
                        ppc64_caches.dline_size = lsize;
                        ppc64_caches.log_dline_size = __ilog2(lsize);
                        ppc64_caches.dlines_per_page = PAGE_SIZE / lsize;

                        size = 0;
                        lsize = cur_cpu_spec->icache_bsize;
                        sizep = get_property(np, "i-cache-size", NULL);
                        if (sizep != NULL)
                                size = *sizep;
                        lsizep = get_property(np, ic, NULL);
                        if (lsizep != NULL)
                                lsize = *lsizep;
                        if (sizep == 0 || lsizep == 0)
                                DBG("Argh, can't find icache properties ! "
                                    "sizep: %p, lsizep: %p\n", sizep, lsizep);

                        ppc64_caches.isize = size;
                        ppc64_caches.iline_size = lsize;
                        ppc64_caches.log_iline_size = __ilog2(lsize);
                        ppc64_caches.ilines_per_page = PAGE_SIZE / lsize;
                }
        }

        DBG(" <- initialize_cache_info()\n");
}


/*
 * Do some initial setup of the system.  The parameters are those which 
 * were passed in from the bootloader.
 */
void __init setup_system(void)
{
        DBG(" -> setup_system()\n");

        /* Apply the CPUs-specific and firmware specific fixups to kernel
         * text (nop out sections not relevant to this CPU or this firmware)
         */
        do_feature_fixups(cur_cpu_spec->cpu_features,
                          &__start___ftr_fixup, &__stop___ftr_fixup);
        do_feature_fixups(powerpc_firmware_features,
                          &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);

        /*
         * Unflatten the device-tree passed by prom_init or kexec
         */
        unflatten_device_tree();

        /*
         * Fill the ppc64_caches & systemcfg structures with informations
         * retrieved from the device-tree.
         */
        initialize_cache_info();

        /*
         * Initialize irq remapping subsystem
         */
        irq_early_init();

#ifdef CONFIG_PPC_RTAS
        /*
         * Initialize RTAS if available
         */
        rtas_initialize();
#endif /* CONFIG_PPC_RTAS */

        /*
         * Check if we have an initrd provided via the device-tree
         */
        check_for_initrd();

        /*
         * Do some platform specific early initializations, that includes
         * setting up the hash table pointers. It also sets up some interrupt-mapping
         * related options that will be used by finish_device_tree()
         */
        if (ppc_md.init_early)
                ppc_md.init_early();

        /*
         * We can discover serial ports now since the above did setup the
         * hash table management for us, thus ioremap works. We do that early
         * so that further code can be debugged
         */
        find_legacy_serial_ports();

        /*
         * Register early console
         */
        register_early_udbg_console();

        /*
         * Initialize xmon
         */
        xmon_setup();

        check_smt_enabled();
        smp_setup_cpu_maps();

#ifdef CONFIG_SMP
        /* Release secondary cpus out of their spinloops at 0x60 now that
         * we can map physical -> logical CPU ids
         */
        smp_release_cpus();
#endif

        printk("Starting Linux PPC64 %s\n", init_utsname()->version);

        printk("-----------------------------------------------------\n");
        printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
        printk("physicalMemorySize            = 0x%lx\n", lmb_phys_mem_size());
        printk("ppc64_caches.dcache_line_size = 0x%x\n",
               ppc64_caches.dline_size);
        printk("ppc64_caches.icache_line_size = 0x%x\n",
               ppc64_caches.iline_size);
        printk("htab_address                  = 0x%p\n", htab_address);
        printk("htab_hash_mask                = 0x%lx\n", htab_hash_mask);
#if PHYSICAL_START > 0
        printk("physical_start                = 0x%x\n", PHYSICAL_START);
#endif
        printk("-----------------------------------------------------\n");

        DBG(" <- setup_system()\n");
}

#ifdef CONFIG_IRQSTACKS
static void __init irqstack_early_init(void)
{
        unsigned int i;

        /*
         * interrupt stacks must be under 256MB, we cannot afford to take
         * SLB misses on them.
         */
        for_each_possible_cpu(i) {
                softirq_ctx[i] = (struct thread_info *)
                        __va(lmb_alloc_base(THREAD_SIZE,
                                            THREAD_SIZE, 0x10000000));
                hardirq_ctx[i] = (struct thread_info *)
                        __va(lmb_alloc_base(THREAD_SIZE,
                                            THREAD_SIZE, 0x10000000));
        }
}
#else
#define irqstack_early_init()
#endif

/*
 * Stack space used when we detect a bad kernel stack pointer, and
 * early in SMP boots before relocation is enabled.
 */
static void __init emergency_stack_init(void)
{
        unsigned long limit;
        unsigned int i;

        /*
         * Emergency stacks must be under 256MB, we cannot afford to take
         * SLB misses on them. The ABI also requires them to be 128-byte
         * aligned.
         *
         * Since we use these as temporary stacks during secondary CPU
         * bringup, we need to get at them in real mode. This means they
         * must also be within the RMO region.
         */
        limit = min(0x10000000UL, lmb.rmo_size);

        for_each_possible_cpu(i)
                paca[i].emergency_sp =
                __va(lmb_alloc_base(HW_PAGE_SIZE, 128, limit)) + HW_PAGE_SIZE;
}

/*
 * Called into from start_kernel, after lock_kernel has been called.
 * Initializes bootmem, which is unsed to manage page allocation until
 * mem_init is called.
 */
void __init setup_arch(char **cmdline_p)
{
        ppc64_boot_msg(0x12, "Setup Arch");

        *cmdline_p = cmd_line;

        /*
         * Set cache line size based on type of cpu as a default.
         * Systems with OF can look in the properties on the cpu node(s)
         * for a possibly more accurate value.
         */
        dcache_bsize = ppc64_caches.dline_size;
        icache_bsize = ppc64_caches.iline_size;

        /* reboot on panic */
        panic_timeout = 180;

        if (ppc_md.panic)
                setup_panic();

        init_mm.start_code = PAGE_OFFSET;
        init_mm.end_code = (unsigned long) _etext;
        init_mm.end_data = (unsigned long) _edata;
        init_mm.brk = klimit;
        
        irqstack_early_init();
        emergency_stack_init();

        stabs_alloc();

        /* set up the bootmem stuff with available memory */
        do_init_bootmem();
        sparse_init();

#ifdef CONFIG_DUMMY_CONSOLE
        conswitchp = &dummy_con;
#endif

        ppc_md.setup_arch();

        paging_init();
        ppc64_boot_msg(0x15, "Setup Done");
}


/* ToDo: do something useful if ppc_md is not yet setup. */
#define PPC64_LINUX_FUNCTION 0x0f000000
#define PPC64_IPL_MESSAGE 0xc0000000
#define PPC64_TERM_MESSAGE 0xb0000000

static void ppc64_do_msg(unsigned int src, const char *msg)
{
        if (ppc_md.progress) {
                char buf[128];

                sprintf(buf, "%08X\n", src);
                ppc_md.progress(buf, 0);
                snprintf(buf, 128, "%s", msg);
                ppc_md.progress(buf, 0);
        }
}

/* Print a boot progress message. */
void ppc64_boot_msg(unsigned int src, const char *msg)
{
        ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg);
        printk("[boot]%04x %s\n", src, msg);
}

/* Print a termination message (print only -- does not stop the kernel) */
void ppc64_terminate_msg(unsigned int src, const char *msg)
{
        ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg);
        printk("[terminate]%04x %s\n", src, msg);
}

void cpu_die(void)
{
        if (ppc_md.cpu_die)
                ppc_md.cpu_die();
}

#ifdef CONFIG_SMP
void __init setup_per_cpu_areas(void)
{
        int i;
        unsigned long size;
        char *ptr;

        /* Copy section for each CPU (we discard the original) */
        size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
#ifdef CONFIG_MODULES
        if (size < PERCPU_ENOUGH_ROOM)
                size = PERCPU_ENOUGH_ROOM;
#endif

        for_each_possible_cpu(i) {
                ptr = alloc_bootmem_node(NODE_DATA(cpu_to_node(i)), size);
                if (!ptr)
                        panic("Cannot allocate cpu data for CPU %d\n", i);

                paca[i].data_offset = ptr - __per_cpu_start;
                memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
        }
}
#endif


#ifdef CONFIG_PPC_INDIRECT_IO
struct ppc_pci_io ppc_pci_io;
EXPORT_SYMBOL(ppc_pci_io);
#endif /* CONFIG_PPC_INDIRECT_IO */