projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
perf: Register PMU implementations
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / powerpc / kernel / head_32.S
1 /*
2 * PowerPC version
3 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
4 *
5 * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
6 * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
7 * Adapted for Power Macintosh by Paul Mackerras.
8 * Low-level exception handlers and MMU support
9 * rewritten by Paul Mackerras.
10 * Copyright (C) 1996 Paul Mackerras.
11 * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
12 *
13 * This file contains the low-level support and setup for the
14 * PowerPC platform, including trap and interrupt dispatch.
15 * (The PPC 8xx embedded CPUs use head_8xx.S instead.)
16 *
17 * This program is free software; you can redistribute it and/or
18 * modify it under the terms of the GNU General Public License
19 * as published by the Free Software Foundation; either version
20 * 2 of the License, or (at your option) any later version.
21 *
22 */
23
24 #include <linux/init.h>
25 #include <asm/reg.h>
26 #include <asm/page.h>
27 #include <asm/mmu.h>
28 #include <asm/pgtable.h>
29 #include <asm/cputable.h>
30 #include <asm/cache.h>
31 #include <asm/thread_info.h>
32 #include <asm/ppc_asm.h>
33 #include <asm/asm-offsets.h>
34 #include <asm/ptrace.h>
35 #include <asm/bug.h>
36 #include <asm/kvm_book3s_asm.h>
37
38 /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
39 #define LOAD_BAT(n, reg, RA, RB) \
40 /* see the comment for clear_bats() -- Cort */ \
41 li RA,0; \
42 mtspr SPRN_IBAT##n##U,RA; \
43 mtspr SPRN_DBAT##n##U,RA; \
44 lwz RA,(n*16)+0(reg); \
45 lwz RB,(n*16)+4(reg); \
46 mtspr SPRN_IBAT##n##U,RA; \
47 mtspr SPRN_IBAT##n##L,RB; \
48 beq 1f; \
49 lwz RA,(n*16)+8(reg); \
50 lwz RB,(n*16)+12(reg); \
51 mtspr SPRN_DBAT##n##U,RA; \
52 mtspr SPRN_DBAT##n##L,RB; \
53 1:
54
55 __HEAD
56 .stabs "arch/powerpc/kernel/",N_SO,0,0,0f
57 .stabs "head_32.S",N_SO,0,0,0f
58 0:
59 _ENTRY(_stext);
60
61 /*
62 * _start is defined this way because the XCOFF loader in the OpenFirmware
63 * on the powermac expects the entry point to be a procedure descriptor.
64 */
65 _ENTRY(_start);
66 /*
67 * These are here for legacy reasons, the kernel used to
68 * need to look like a coff function entry for the pmac
69 * but we're always started by some kind of bootloader now.
70 * -- Cort
71 */
72 nop /* used by __secondary_hold on prep (mtx) and chrp smp */
73 nop /* used by __secondary_hold on prep (mtx) and chrp smp */
74 nop
75
76 /* PMAC
77 * Enter here with the kernel text, data and bss loaded starting at
78 * 0, running with virtual == physical mapping.
79 * r5 points to the prom entry point (the client interface handler
80 * address). Address translation is turned on, with the prom
81 * managing the hash table. Interrupts are disabled. The stack
82 * pointer (r1) points to just below the end of the half-meg region
83 * from 0x380000 - 0x400000, which is mapped in already.
84 *
85 * If we are booted from MacOS via BootX, we enter with the kernel
86 * image loaded somewhere, and the following values in registers:
87 * r3: 'BooX' (0x426f6f58)
88 * r4: virtual address of boot_infos_t
89 * r5: 0
90 *
91 * PREP
92 * This is jumped to on prep systems right after the kernel is relocated
93 * to its proper place in memory by the boot loader. The expected layout
94 * of the regs is:
95 * r3: ptr to residual data
96 * r4: initrd_start or if no initrd then 0
97 * r5: initrd_end - unused if r4 is 0
98 * r6: Start of command line string
99 * r7: End of command line string
100 *
101 * This just gets a minimal mmu environment setup so we can call
102 * start_here() to do the real work.
103 * -- Cort
104 */
105
106 .globl __start
107 __start:
108 /*
109 * We have to do any OF calls before we map ourselves to KERNELBASE,
110 * because OF may have I/O devices mapped into that area
111 * (particularly on CHRP).
112 */
113 cmpwi 0,r5,0
114 beq 1f
115
116 #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
117 /* find out where we are now */
118 bcl 20,31,$+4
119 0: mflr r8 /* r8 = runtime addr here */
120 addis r8,r8,(_stext - 0b)@ha
121 addi r8,r8,(_stext - 0b)@l /* current runtime base addr */
122 bl prom_init
123 #endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */
124
125 /* We never return. We also hit that trap if trying to boot
126 * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
127 trap
128
129 /*
130 * Check for BootX signature when supporting PowerMac and branch to
131 * appropriate trampoline if it's present
132 */
133 #ifdef CONFIG_PPC_PMAC
134 1: lis r31,0x426f
135 ori r31,r31,0x6f58
136 cmpw 0,r3,r31
137 bne 1f
138 bl bootx_init
139 trap
140 #endif /* CONFIG_PPC_PMAC */
141
142 1: mr r31,r3 /* save parameters */
143 mr r30,r4
144 li r24,0 /* cpu # */
145
146 /*
147 * early_init() does the early machine identification and does
148 * the necessary low-level setup and clears the BSS
149 * -- Cort <cort@fsmlabs.com>
150 */
151 bl early_init
152
153 /* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
154 * the physical address we are running at, returned by early_init()
155 */
156 bl mmu_off
157 __after_mmu_off:
158 bl clear_bats
159 bl flush_tlbs
160
161 bl initial_bats
162 #if defined(CONFIG_BOOTX_TEXT)
163 bl setup_disp_bat
164 #endif
165 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
166 bl setup_cpm_bat
167 #endif
168 #ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
169 bl setup_usbgecko_bat
170 #endif
171
172 /*
173 * Call setup_cpu for CPU 0 and initialize 6xx Idle
174 */
175 bl reloc_offset
176 li r24,0 /* cpu# */
177 bl call_setup_cpu /* Call setup_cpu for this CPU */
178 #ifdef CONFIG_6xx
179 bl reloc_offset
180 bl init_idle_6xx
181 #endif /* CONFIG_6xx */
182
183
184 /*
185 * We need to run with _start at physical address 0.
186 * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
187 * the exception vectors at 0 (and therefore this copy
188 * overwrites OF's exception vectors with our own).
189 * The MMU is off at this point.
190 */
191 bl reloc_offset
192 mr r26,r3
193 addis r4,r3,KERNELBASE@h /* current address of _start */
194 lis r5,PHYSICAL_START@h
195 cmplw 0,r4,r5 /* already running at PHYSICAL_START? */
196 bne relocate_kernel
197 /*
198 * we now have the 1st 16M of ram mapped with the bats.
199 * prep needs the mmu to be turned on here, but pmac already has it on.
200 * this shouldn't bother the pmac since it just gets turned on again
201 * as we jump to our code at KERNELBASE. -- Cort
202 * Actually no, pmac doesn't have it on any more. BootX enters with MMU
203 * off, and in other cases, we now turn it off before changing BATs above.
204 */
205 turn_on_mmu:
206 mfmsr r0
207 ori r0,r0,MSR_DR|MSR_IR
208 mtspr SPRN_SRR1,r0
209 lis r0,start_here@h
210 ori r0,r0,start_here@l
211 mtspr SPRN_SRR0,r0
212 SYNC
213 RFI /* enables MMU */
214
215 /*
216 * We need __secondary_hold as a place to hold the other cpus on
217 * an SMP machine, even when we are running a UP kernel.
218 */
219 . = 0xc0 /* for prep bootloader */
220 li r3,1 /* MTX only has 1 cpu */
221 .globl __secondary_hold
222 __secondary_hold:
223 /* tell the master we're here */
224 stw r3,__secondary_hold_acknowledge@l(0)
225 #ifdef CONFIG_SMP
226 100: lwz r4,0(0)
227 /* wait until we're told to start */
228 cmpw 0,r4,r3
229 bne 100b
230 /* our cpu # was at addr 0 - go */
231 mr r24,r3 /* cpu # */
232 b __secondary_start
233 #else
234 b .
235 #endif /* CONFIG_SMP */
236
237 .globl __secondary_hold_spinloop
238 __secondary_hold_spinloop:
239 .long 0
240 .globl __secondary_hold_acknowledge
241 __secondary_hold_acknowledge:
242 .long -1
243
244 /*
245 * Exception entry code. This code runs with address translation
246 * turned off, i.e. using physical addresses.
247 * We assume sprg3 has the physical address of the current
248 * task's thread_struct.
249 */
250 #define EXCEPTION_PROLOG \
251 mtspr SPRN_SPRG_SCRATCH0,r10; \
252 mtspr SPRN_SPRG_SCRATCH1,r11; \
253 mfcr r10; \
254 EXCEPTION_PROLOG_1; \
255 EXCEPTION_PROLOG_2
256
257 #define EXCEPTION_PROLOG_1 \
258 mfspr r11,SPRN_SRR1; /* check whether user or kernel */ \
259 andi. r11,r11,MSR_PR; \
260 tophys(r11,r1); /* use tophys(r1) if kernel */ \
261 beq 1f; \
262 mfspr r11,SPRN_SPRG_THREAD; \
263 lwz r11,THREAD_INFO-THREAD(r11); \
264 addi r11,r11,THREAD_SIZE; \
265 tophys(r11,r11); \
266 1: subi r11,r11,INT_FRAME_SIZE /* alloc exc. frame */
267
268
269 #define EXCEPTION_PROLOG_2 \
270 CLR_TOP32(r11); \
271 stw r10,_CCR(r11); /* save registers */ \
272 stw r12,GPR12(r11); \
273 stw r9,GPR9(r11); \
274 mfspr r10,SPRN_SPRG_SCRATCH0; \
275 stw r10,GPR10(r11); \
276 mfspr r12,SPRN_SPRG_SCRATCH1; \
277 stw r12,GPR11(r11); \
278 mflr r10; \
279 stw r10,_LINK(r11); \
280 mfspr r12,SPRN_SRR0; \
281 mfspr r9,SPRN_SRR1; \
282 stw r1,GPR1(r11); \
283 stw r1,0(r11); \
284 tovirt(r1,r11); /* set new kernel sp */ \
285 li r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
286 MTMSRD(r10); /* (except for mach check in rtas) */ \
287 stw r0,GPR0(r11); \
288 lis r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
289 addi r10,r10,STACK_FRAME_REGS_MARKER@l; \
290 stw r10,8(r11); \
291 SAVE_4GPRS(3, r11); \
292 SAVE_2GPRS(7, r11)
293
294 /*
295 * Note: code which follows this uses cr0.eq (set if from kernel),
296 * r11, r12 (SRR0), and r9 (SRR1).
297 *
298 * Note2: once we have set r1 we are in a position to take exceptions
299 * again, and we could thus set MSR:RI at that point.
300 */
301
302 /*
303 * Exception vectors.
304 */
305 #define EXCEPTION(n, label, hdlr, xfer) \
306 . = n; \
307 DO_KVM n; \
308 label: \
309 EXCEPTION_PROLOG; \
310 addi r3,r1,STACK_FRAME_OVERHEAD; \
311 xfer(n, hdlr)
312
313 #define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret) \
314 li r10,trap; \
315 stw r10,_TRAP(r11); \
316 li r10,MSR_KERNEL; \
317 copyee(r10, r9); \
318 bl tfer; \
319 i##n: \
320 .long hdlr; \
321 .long ret
322
323 #define COPY_EE(d, s) rlwimi d,s,0,16,16
324 #define NOCOPY(d, s)
325
326 #define EXC_XFER_STD(n, hdlr) \
327 EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full, \
328 ret_from_except_full)
329
330 #define EXC_XFER_LITE(n, hdlr) \
331 EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
332 ret_from_except)
333
334 #define EXC_XFER_EE(n, hdlr) \
335 EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
336 ret_from_except_full)
337
338 #define EXC_XFER_EE_LITE(n, hdlr) \
339 EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
340 ret_from_except)
341
342 /* System reset */
343 /* core99 pmac starts the seconary here by changing the vector, and
344 putting it back to what it was (unknown_exception) when done. */
345 EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
346
347 /* Machine check */
348 /*
349 * On CHRP, this is complicated by the fact that we could get a
350 * machine check inside RTAS, and we have no guarantee that certain
351 * critical registers will have the values we expect. The set of
352 * registers that might have bad values includes all the GPRs
353 * and all the BATs. We indicate that we are in RTAS by putting
354 * a non-zero value, the address of the exception frame to use,
355 * in SPRG2. The machine check handler checks SPRG2 and uses its
356 * value if it is non-zero. If we ever needed to free up SPRG2,
357 * we could use a field in the thread_info or thread_struct instead.
358 * (Other exception handlers assume that r1 is a valid kernel stack
359 * pointer when we take an exception from supervisor mode.)
360 * -- paulus.
361 */
362 . = 0x200
363 DO_KVM 0x200
364 mtspr SPRN_SPRG_SCRATCH0,r10
365 mtspr SPRN_SPRG_SCRATCH1,r11
366 mfcr r10
367 #ifdef CONFIG_PPC_CHRP
368 mfspr r11,SPRN_SPRG_RTAS
369 cmpwi 0,r11,0
370 bne 7f
371 #endif /* CONFIG_PPC_CHRP */
372 EXCEPTION_PROLOG_1
373 7: EXCEPTION_PROLOG_2
374 addi r3,r1,STACK_FRAME_OVERHEAD
375 #ifdef CONFIG_PPC_CHRP
376 mfspr r4,SPRN_SPRG_RTAS
377 cmpwi cr1,r4,0
378 bne cr1,1f
379 #endif
380 EXC_XFER_STD(0x200, machine_check_exception)
381 #ifdef CONFIG_PPC_CHRP
382 1: b machine_check_in_rtas
383 #endif
384
385 /* Data access exception. */
386 . = 0x300
387 DO_KVM 0x300
388 DataAccess:
389 EXCEPTION_PROLOG
390 mfspr r10,SPRN_DSISR
391 stw r10,_DSISR(r11)
392 andis. r0,r10,0xa470 /* weird error? */
393 bne 1f /* if not, try to put a PTE */
394 mfspr r4,SPRN_DAR /* into the hash table */
395 rlwinm r3,r10,32-15,21,21 /* DSISR_STORE -> _PAGE_RW */
396 bl hash_page
397 1: lwz r5,_DSISR(r11) /* get DSISR value */
398 mfspr r4,SPRN_DAR
399 EXC_XFER_EE_LITE(0x300, handle_page_fault)
400
401
402 /* Instruction access exception. */
403 . = 0x400
404 DO_KVM 0x400
405 InstructionAccess:
406 EXCEPTION_PROLOG
407 andis. r0,r9,0x4000 /* no pte found? */
408 beq 1f /* if so, try to put a PTE */
409 li r3,0 /* into the hash table */
410 mr r4,r12 /* SRR0 is fault address */
411 bl hash_page
412 1: mr r4,r12
413 mr r5,r9
414 EXC_XFER_EE_LITE(0x400, handle_page_fault)
415
416 /* External interrupt */
417 EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
418
419 /* Alignment exception */
420 . = 0x600
421 DO_KVM 0x600
422 Alignment:
423 EXCEPTION_PROLOG
424 mfspr r4,SPRN_DAR
425 stw r4,_DAR(r11)
426 mfspr r5,SPRN_DSISR
427 stw r5,_DSISR(r11)
428 addi r3,r1,STACK_FRAME_OVERHEAD
429 EXC_XFER_EE(0x600, alignment_exception)
430
431 /* Program check exception */
432 EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
433
434 /* Floating-point unavailable */
435 . = 0x800
436 DO_KVM 0x800
437 FPUnavailable:
438 BEGIN_FTR_SECTION
439 /*
440 * Certain Freescale cores don't have a FPU and treat fp instructions
441 * as a FP Unavailable exception. Redirect to illegal/emulation handling.
442 */
443 b ProgramCheck
444 END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
445 EXCEPTION_PROLOG
446 beq 1f
447 bl load_up_fpu /* if from user, just load it up */
448 b fast_exception_return
449 1: addi r3,r1,STACK_FRAME_OVERHEAD
450 EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
451
452 /* Decrementer */
453 EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
454
455 EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
456 EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
457
458 /* System call */
459 . = 0xc00
460 DO_KVM 0xc00
461 SystemCall:
462 EXCEPTION_PROLOG
463 EXC_XFER_EE_LITE(0xc00, DoSyscall)
464
465 /* Single step - not used on 601 */
466 EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
467 EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
468
469 /*
470 * The Altivec unavailable trap is at 0x0f20. Foo.
471 * We effectively remap it to 0x3000.
472 * We include an altivec unavailable exception vector even if
473 * not configured for Altivec, so that you can't panic a
474 * non-altivec kernel running on a machine with altivec just
475 * by executing an altivec instruction.
476 */
477 . = 0xf00
478 DO_KVM 0xf00
479 b PerformanceMonitor
480
481 . = 0xf20
482 DO_KVM 0xf20
483 b AltiVecUnavailable
484
485 /*
486 * Handle TLB miss for instruction on 603/603e.
487 * Note: we get an alternate set of r0 - r3 to use automatically.
488 */
489 . = 0x1000
490 InstructionTLBMiss:
491 /*
492 * r0: scratch
493 * r1: linux style pte ( later becomes ppc hardware pte )
494 * r2: ptr to linux-style pte
495 * r3: scratch
496 */
497 /* Get PTE (linux-style) and check access */
498 mfspr r3,SPRN_IMISS
499 lis r1,PAGE_OFFSET@h /* check if kernel address */
500 cmplw 0,r1,r3
501 mfspr r2,SPRN_SPRG_THREAD
502 li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
503 lwz r2,PGDIR(r2)
504 bge- 112f
505 mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
506 rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
507 lis r2,swapper_pg_dir@ha /* if kernel address, use */
508 addi r2,r2,swapper_pg_dir@l /* kernel page table */
509 112: tophys(r2,r2)
510 rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
511 lwz r2,0(r2) /* get pmd entry */
512 rlwinm. r2,r2,0,0,19 /* extract address of pte page */
513 beq- InstructionAddressInvalid /* return if no mapping */
514 rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
515 lwz r0,0(r2) /* get linux-style pte */
516 andc. r1,r1,r0 /* check access & ~permission */
517 bne- InstructionAddressInvalid /* return if access not permitted */
518 ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
519 /*
520 * NOTE! We are assuming this is not an SMP system, otherwise
521 * we would need to update the pte atomically with lwarx/stwcx.
522 */
523 stw r0,0(r2) /* update PTE (accessed bit) */
524 /* Convert linux-style PTE to low word of PPC-style PTE */
525 rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
526 rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
527 and r1,r1,r2 /* writable if _RW and _DIRTY */
528 rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
529 rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
530 ori r1,r1,0xe04 /* clear out reserved bits */
531 andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
532 BEGIN_FTR_SECTION
533 rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
534 END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
535 mtspr SPRN_RPA,r1
536 tlbli r3
537 mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
538 mtcrf 0x80,r3
539 rfi
540 InstructionAddressInvalid:
541 mfspr r3,SPRN_SRR1
542 rlwinm r1,r3,9,6,6 /* Get load/store bit */
543
544 addis r1,r1,0x2000
545 mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */
546 andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
547 or r2,r2,r1
548 mtspr SPRN_SRR1,r2
549 mfspr r1,SPRN_IMISS /* Get failing address */
550 rlwinm. r2,r2,0,31,31 /* Check for little endian access */
551 rlwimi r2,r2,1,30,30 /* change 1 -> 3 */
552 xor r1,r1,r2
553 mtspr SPRN_DAR,r1 /* Set fault address */
554 mfmsr r0 /* Restore "normal" registers */
555 xoris r0,r0,MSR_TGPR>>16
556 mtcrf 0x80,r3 /* Restore CR0 */
557 mtmsr r0
558 b InstructionAccess
559
560 /*
561 * Handle TLB miss for DATA Load operation on 603/603e
562 */
563 . = 0x1100
564 DataLoadTLBMiss:
565 /*
566 * r0: scratch
567 * r1: linux style pte ( later becomes ppc hardware pte )
568 * r2: ptr to linux-style pte
569 * r3: scratch
570 */
571 /* Get PTE (linux-style) and check access */
572 mfspr r3,SPRN_DMISS
573 lis r1,PAGE_OFFSET@h /* check if kernel address */
574 cmplw 0,r1,r3
575 mfspr r2,SPRN_SPRG_THREAD
576 li r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
577 lwz r2,PGDIR(r2)
578 bge- 112f
579 mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
580 rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
581 lis r2,swapper_pg_dir@ha /* if kernel address, use */
582 addi r2,r2,swapper_pg_dir@l /* kernel page table */
583 112: tophys(r2,r2)
584 rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
585 lwz r2,0(r2) /* get pmd entry */
586 rlwinm. r2,r2,0,0,19 /* extract address of pte page */
587 beq- DataAddressInvalid /* return if no mapping */
588 rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
589 lwz r0,0(r2) /* get linux-style pte */
590 andc. r1,r1,r0 /* check access & ~permission */
591 bne- DataAddressInvalid /* return if access not permitted */
592 ori r0,r0,_PAGE_ACCESSED /* set _PAGE_ACCESSED in pte */
593 /*
594 * NOTE! We are assuming this is not an SMP system, otherwise
595 * we would need to update the pte atomically with lwarx/stwcx.
596 */
597 stw r0,0(r2) /* update PTE (accessed bit) */
598 /* Convert linux-style PTE to low word of PPC-style PTE */
599 rlwinm r1,r0,32-10,31,31 /* _PAGE_RW -> PP lsb */
600 rlwinm r2,r0,32-7,31,31 /* _PAGE_DIRTY -> PP lsb */
601 and r1,r1,r2 /* writable if _RW and _DIRTY */
602 rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
603 rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
604 ori r1,r1,0xe04 /* clear out reserved bits */
605 andc r1,r0,r1 /* PP = user? (rw&dirty? 2: 3): 0 */
606 BEGIN_FTR_SECTION
607 rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
608 END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
609 mtspr SPRN_RPA,r1
610 mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
611 mtcrf 0x80,r2
612 BEGIN_MMU_FTR_SECTION
613 li r0,1
614 mfspr r1,SPRN_SPRG_603_LRU
615 rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
616 slw r0,r0,r2
617 xor r1,r0,r1
618 srw r0,r1,r2
619 mtspr SPRN_SPRG_603_LRU,r1
620 mfspr r2,SPRN_SRR1
621 rlwimi r2,r0,31-14,14,14
622 mtspr SPRN_SRR1,r2
623 END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
624 tlbld r3
625 rfi
626 DataAddressInvalid:
627 mfspr r3,SPRN_SRR1
628 rlwinm r1,r3,9,6,6 /* Get load/store bit */
629 addis r1,r1,0x2000
630 mtspr SPRN_DSISR,r1
631 andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
632 mtspr SPRN_SRR1,r2
633 mfspr r1,SPRN_DMISS /* Get failing address */
634 rlwinm. r2,r2,0,31,31 /* Check for little endian access */
635 beq 20f /* Jump if big endian */
636 xori r1,r1,3
637 20: mtspr SPRN_DAR,r1 /* Set fault address */
638 mfmsr r0 /* Restore "normal" registers */
639 xoris r0,r0,MSR_TGPR>>16
640 mtcrf 0x80,r3 /* Restore CR0 */
641 mtmsr r0
642 b DataAccess
643
644 /*
645 * Handle TLB miss for DATA Store on 603/603e
646 */
647 . = 0x1200
648 DataStoreTLBMiss:
649 /*
650 * r0: scratch
651 * r1: linux style pte ( later becomes ppc hardware pte )
652 * r2: ptr to linux-style pte
653 * r3: scratch
654 */
655 /* Get PTE (linux-style) and check access */
656 mfspr r3,SPRN_DMISS
657 lis r1,PAGE_OFFSET@h /* check if kernel address */
658 cmplw 0,r1,r3
659 mfspr r2,SPRN_SPRG_THREAD
660 li r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
661 lwz r2,PGDIR(r2)
662 bge- 112f
663 mfspr r2,SPRN_SRR1 /* and MSR_PR bit from SRR1 */
664 rlwimi r1,r2,32-12,29,29 /* shift MSR_PR to _PAGE_USER posn */
665 lis r2,swapper_pg_dir@ha /* if kernel address, use */
666 addi r2,r2,swapper_pg_dir@l /* kernel page table */
667 112: tophys(r2,r2)
668 rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
669 lwz r2,0(r2) /* get pmd entry */
670 rlwinm. r2,r2,0,0,19 /* extract address of pte page */
671 beq- DataAddressInvalid /* return if no mapping */
672 rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
673 lwz r0,0(r2) /* get linux-style pte */
674 andc. r1,r1,r0 /* check access & ~permission */
675 bne- DataAddressInvalid /* return if access not permitted */
676 ori r0,r0,_PAGE_ACCESSED|_PAGE_DIRTY
677 /*
678 * NOTE! We are assuming this is not an SMP system, otherwise
679 * we would need to update the pte atomically with lwarx/stwcx.
680 */
681 stw r0,0(r2) /* update PTE (accessed/dirty bits) */
682 /* Convert linux-style PTE to low word of PPC-style PTE */
683 rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
684 li r1,0xe05 /* clear out reserved bits & PP lsb */
685 andc r1,r0,r1 /* PP = user? 2: 0 */
686 BEGIN_FTR_SECTION
687 rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
688 END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
689 mtspr SPRN_RPA,r1
690 mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
691 mtcrf 0x80,r2
692 BEGIN_MMU_FTR_SECTION
693 li r0,1
694 mfspr r1,SPRN_SPRG_603_LRU
695 rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
696 slw r0,r0,r2
697 xor r1,r0,r1
698 srw r0,r1,r2
699 mtspr SPRN_SPRG_603_LRU,r1
700 mfspr r2,SPRN_SRR1
701 rlwimi r2,r0,31-14,14,14
702 mtspr SPRN_SRR1,r2
703 END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
704 tlbld r3
705 rfi
706
707 #ifndef CONFIG_ALTIVEC
708 #define altivec_assist_exception unknown_exception
709 #endif
710
711 EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
712 EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
713 EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
714 EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
715 EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
716 EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
717 EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
718 EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
719 EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
720 EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
721 EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
722 EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
723 EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
724 EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
725 EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
726 EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
727 EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
728 EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
729 EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
730 EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
731 EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
732 EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
733 EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
734 EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
735 EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
736 EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
737 EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
738 EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
739 EXCEPTION(0x2f00, MOLTrampoline, unknown_exception, EXC_XFER_EE_LITE)
740
741 .globl mol_trampoline
742 .set mol_trampoline, i0x2f00
743
744 . = 0x3000
745
746 AltiVecUnavailable:
747 EXCEPTION_PROLOG
748 #ifdef CONFIG_ALTIVEC
749 beq 1f
750 bl load_up_altivec /* if from user, just load it up */
751 b fast_exception_return
752 #endif /* CONFIG_ALTIVEC */
753 1: addi r3,r1,STACK_FRAME_OVERHEAD
754 EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
755
756 PerformanceMonitor:
757 EXCEPTION_PROLOG
758 addi r3,r1,STACK_FRAME_OVERHEAD
759 EXC_XFER_STD(0xf00, performance_monitor_exception)
760
761
762 /*
763 * This code is jumped to from the startup code to copy
764 * the kernel image to physical address PHYSICAL_START.
765 */
766 relocate_kernel:
767 addis r9,r26,klimit@ha /* fetch klimit */
768 lwz r25,klimit@l(r9)
769 addis r25,r25,-KERNELBASE@h
770 lis r3,PHYSICAL_START@h /* Destination base address */
771 li r6,0 /* Destination offset */
772 li r5,0x4000 /* # bytes of memory to copy */
773 bl copy_and_flush /* copy the first 0x4000 bytes */
774 addi r0,r3,4f@l /* jump to the address of 4f */
775 mtctr r0 /* in copy and do the rest. */
776 bctr /* jump to the copy */
777 4: mr r5,r25
778 bl copy_and_flush /* copy the rest */
779 b turn_on_mmu
780
781 /*
782 * Copy routine used to copy the kernel to start at physical address 0
783 * and flush and invalidate the caches as needed.
784 * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
785 * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
786 */
787 _ENTRY(copy_and_flush)
788 addi r5,r5,-4
789 addi r6,r6,-4
790 4: li r0,L1_CACHE_BYTES/4
791 mtctr r0
792 3: addi r6,r6,4 /* copy a cache line */
793 lwzx r0,r6,r4
794 stwx r0,r6,r3
795 bdnz 3b
796 dcbst r6,r3 /* write it to memory */
797 sync
798 icbi r6,r3 /* flush the icache line */
799 cmplw 0,r6,r5
800 blt 4b
801 sync /* additional sync needed on g4 */
802 isync
803 addi r5,r5,4
804 addi r6,r6,4
805 blr
806
807 #ifdef CONFIG_SMP
808 #ifdef CONFIG_GEMINI
809 .globl __secondary_start_gemini
810 __secondary_start_gemini:
811 mfspr r4,SPRN_HID0
812 ori r4,r4,HID0_ICFI
813 li r3,0
814 ori r3,r3,HID0_ICE
815 andc r4,r4,r3
816 mtspr SPRN_HID0,r4
817 sync
818 b __secondary_start
819 #endif /* CONFIG_GEMINI */
820
821 .globl __secondary_start_mpc86xx
822 __secondary_start_mpc86xx:
823 mfspr r3, SPRN_PIR
824 stw r3, __secondary_hold_acknowledge@l(0)
825 mr r24, r3 /* cpu # */
826 b __secondary_start
827
828 .globl __secondary_start_pmac_0
829 __secondary_start_pmac_0:
830 /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
831 li r24,0
832 b 1f
833 li r24,1
834 b 1f
835 li r24,2
836 b 1f
837 li r24,3
838 1:
839 /* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
840 set to map the 0xf0000000 - 0xffffffff region */
841 mfmsr r0
842 rlwinm r0,r0,0,28,26 /* clear DR (0x10) */
843 SYNC
844 mtmsr r0
845 isync
846
847 .globl __secondary_start
848 __secondary_start:
849 /* Copy some CPU settings from CPU 0 */
850 bl __restore_cpu_setup
851
852 lis r3,-KERNELBASE@h
853 mr r4,r24
854 bl call_setup_cpu /* Call setup_cpu for this CPU */
855 #ifdef CONFIG_6xx
856 lis r3,-KERNELBASE@h
857 bl init_idle_6xx
858 #endif /* CONFIG_6xx */
859
860 /* get current_thread_info and current */
861 lis r1,secondary_ti@ha
862 tophys(r1,r1)
863 lwz r1,secondary_ti@l(r1)
864 tophys(r2,r1)
865 lwz r2,TI_TASK(r2)
866
867 /* stack */
868 addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
869 li r0,0
870 tophys(r3,r1)
871 stw r0,0(r3)
872
873 /* load up the MMU */
874 bl load_up_mmu
875
876 /* ptr to phys current thread */
877 tophys(r4,r2)
878 addi r4,r4,THREAD /* phys address of our thread_struct */
879 CLR_TOP32(r4)
880 mtspr SPRN_SPRG_THREAD,r4
881 li r3,0
882 mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
883
884 /* enable MMU and jump to start_secondary */
885 li r4,MSR_KERNEL
886 FIX_SRR1(r4,r5)
887 lis r3,start_secondary@h
888 ori r3,r3,start_secondary@l
889 mtspr SPRN_SRR0,r3
890 mtspr SPRN_SRR1,r4
891 SYNC
892 RFI
893 #endif /* CONFIG_SMP */
894
895 #ifdef CONFIG_KVM_BOOK3S_HANDLER
896 #include "../kvm/book3s_rmhandlers.S"
897 #endif
898
899 /*
900 * Those generic dummy functions are kept for CPUs not
901 * included in CONFIG_6xx
902 */
903 #if !defined(CONFIG_6xx)
904 _ENTRY(__save_cpu_setup)
905 blr
906 _ENTRY(__restore_cpu_setup)
907 blr
908 #endif /* !defined(CONFIG_6xx) */
909
910
911 /*
912 * Load stuff into the MMU. Intended to be called with
913 * IR=0 and DR=0.
914 */
915 load_up_mmu:
916 sync /* Force all PTE updates to finish */
917 isync
918 tlbia /* Clear all TLB entries */
919 sync /* wait for tlbia/tlbie to finish */
920 TLBSYNC /* ... on all CPUs */
921 /* Load the SDR1 register (hash table base & size) */
922 lis r6,_SDR1@ha
923 tophys(r6,r6)
924 lwz r6,_SDR1@l(r6)
925 mtspr SPRN_SDR1,r6
926 li r0,16 /* load up segment register values */
927 mtctr r0 /* for context 0 */
928 lis r3,0x2000 /* Ku = 1, VSID = 0 */
929 li r4,0
930 3: mtsrin r3,r4
931 addi r3,r3,0x111 /* increment VSID */
932 addis r4,r4,0x1000 /* address of next segment */
933 bdnz 3b
934
935 /* Load the BAT registers with the values set up by MMU_init.
936 MMU_init takes care of whether we're on a 601 or not. */
937 mfpvr r3
938 srwi r3,r3,16
939 cmpwi r3,1
940 lis r3,BATS@ha
941 addi r3,r3,BATS@l
942 tophys(r3,r3)
943 LOAD_BAT(0,r3,r4,r5)
944 LOAD_BAT(1,r3,r4,r5)
945 LOAD_BAT(2,r3,r4,r5)
946 LOAD_BAT(3,r3,r4,r5)
947 BEGIN_MMU_FTR_SECTION
948 LOAD_BAT(4,r3,r4,r5)
949 LOAD_BAT(5,r3,r4,r5)
950 LOAD_BAT(6,r3,r4,r5)
951 LOAD_BAT(7,r3,r4,r5)
952 END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
953 blr
954
955 /*
956 * This is where the main kernel code starts.
957 */
958 start_here:
959 /* ptr to current */
960 lis r2,init_task@h
961 ori r2,r2,init_task@l
962 /* Set up for using our exception vectors */
963 /* ptr to phys current thread */
964 tophys(r4,r2)
965 addi r4,r4,THREAD /* init task's THREAD */
966 CLR_TOP32(r4)
967 mtspr SPRN_SPRG_THREAD,r4
968 li r3,0
969 mtspr SPRN_SPRG_RTAS,r3 /* 0 => not in RTAS */
970
971 /* stack */
972 lis r1,init_thread_union@ha
973 addi r1,r1,init_thread_union@l
974 li r0,0
975 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
976 /*
977 * Do early platform-specific initialization,
978 * and set up the MMU.
979 */
980 mr r3,r31
981 mr r4,r30
982 bl machine_init
983 bl __save_cpu_setup
984 bl MMU_init
985
986 /*
987 * Go back to running unmapped so we can load up new values
988 * for SDR1 (hash table pointer) and the segment registers
989 * and change to using our exception vectors.
990 */
991 lis r4,2f@h
992 ori r4,r4,2f@l
993 tophys(r4,r4)
994 li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
995 FIX_SRR1(r3,r5)
996 mtspr SPRN_SRR0,r4
997 mtspr SPRN_SRR1,r3
998 SYNC
999 RFI
1000 /* Load up the kernel context */
1001 2: bl load_up_mmu
1002
1003 #ifdef CONFIG_BDI_SWITCH
1004 /* Add helper information for the Abatron bdiGDB debugger.
1005 * We do this here because we know the mmu is disabled, and
1006 * will be enabled for real in just a few instructions.
1007 */
1008 lis r5, abatron_pteptrs@h
1009 ori r5, r5, abatron_pteptrs@l
1010 stw r5, 0xf0(r0) /* This much match your Abatron config */
1011 lis r6, swapper_pg_dir@h
1012 ori r6, r6, swapper_pg_dir@l
1013 tophys(r5, r5)
1014 stw r6, 0(r5)
1015 #endif /* CONFIG_BDI_SWITCH */
1016
1017 /* Now turn on the MMU for real! */
1018 li r4,MSR_KERNEL
1019 FIX_SRR1(r4,r5)
1020 lis r3,start_kernel@h
1021 ori r3,r3,start_kernel@l
1022 mtspr SPRN_SRR0,r3
1023 mtspr SPRN_SRR1,r4
1024 SYNC
1025 RFI
1026
1027 /*
1028 * void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next);
1029 *
1030 * Set up the segment registers for a new context.
1031 */
1032 _ENTRY(switch_mmu_context)
1033 lwz r3,MMCONTEXTID(r4)
1034 cmpwi cr0,r3,0
1035 blt- 4f
1036 mulli r3,r3,897 /* multiply context by skew factor */
1037 rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */
1038 addis r3,r3,0x6000 /* Set Ks, Ku bits */
1039 li r0,NUM_USER_SEGMENTS
1040 mtctr r0
1041
1042 #ifdef CONFIG_BDI_SWITCH
1043 /* Context switch the PTE pointer for the Abatron BDI2000.
1044 * The PGDIR is passed as second argument.
1045 */
1046 lwz r4,MM_PGD(r4)
1047 lis r5, KERNELBASE@h
1048 lwz r5, 0xf0(r5)
1049 stw r4, 0x4(r5)
1050 #endif
1051 li r4,0
1052 isync
1053 3:
1054 mtsrin r3,r4
1055 addi r3,r3,0x111 /* next VSID */
1056 rlwinm r3,r3,0,8,3 /* clear out any overflow from VSID field */
1057 addis r4,r4,0x1000 /* address of next segment */
1058 bdnz 3b
1059 sync
1060 isync
1061 blr
1062 4: trap
1063 EMIT_BUG_ENTRY 4b,__FILE__,__LINE__,0
1064 blr
1065
1066 /*
1067 * An undocumented "feature" of 604e requires that the v bit
1068 * be cleared before changing BAT values.
1069 *
1070 * Also, newer IBM firmware does not clear bat3 and 4 so
1071 * this makes sure it's done.
1072 * -- Cort
1073 */
1074 clear_bats:
1075 li r10,0
1076 mfspr r9,SPRN_PVR
1077 rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
1078 cmpwi r9, 1
1079 beq 1f
1080
1081 mtspr SPRN_DBAT0U,r10
1082 mtspr SPRN_DBAT0L,r10
1083 mtspr SPRN_DBAT1U,r10
1084 mtspr SPRN_DBAT1L,r10
1085 mtspr SPRN_DBAT2U,r10
1086 mtspr SPRN_DBAT2L,r10
1087 mtspr SPRN_DBAT3U,r10
1088 mtspr SPRN_DBAT3L,r10
1089 1:
1090 mtspr SPRN_IBAT0U,r10
1091 mtspr SPRN_IBAT0L,r10
1092 mtspr SPRN_IBAT1U,r10
1093 mtspr SPRN_IBAT1L,r10
1094 mtspr SPRN_IBAT2U,r10
1095 mtspr SPRN_IBAT2L,r10
1096 mtspr SPRN_IBAT3U,r10
1097 mtspr SPRN_IBAT3L,r10
1098 BEGIN_MMU_FTR_SECTION
1099 /* Here's a tweak: at this point, CPU setup have
1100 * not been called yet, so HIGH_BAT_EN may not be
1101 * set in HID0 for the 745x processors. However, it
1102 * seems that doesn't affect our ability to actually
1103 * write to these SPRs.
1104 */
1105 mtspr SPRN_DBAT4U,r10
1106 mtspr SPRN_DBAT4L,r10
1107 mtspr SPRN_DBAT5U,r10
1108 mtspr SPRN_DBAT5L,r10
1109 mtspr SPRN_DBAT6U,r10
1110 mtspr SPRN_DBAT6L,r10
1111 mtspr SPRN_DBAT7U,r10
1112 mtspr SPRN_DBAT7L,r10
1113 mtspr SPRN_IBAT4U,r10
1114 mtspr SPRN_IBAT4L,r10
1115 mtspr SPRN_IBAT5U,r10
1116 mtspr SPRN_IBAT5L,r10
1117 mtspr SPRN_IBAT6U,r10
1118 mtspr SPRN_IBAT6L,r10
1119 mtspr SPRN_IBAT7U,r10
1120 mtspr SPRN_IBAT7L,r10
1121 END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
1122 blr
1123
1124 flush_tlbs:
1125 lis r10, 0x40
1126 1: addic. r10, r10, -0x1000
1127 tlbie r10
1128 bgt 1b
1129 sync
1130 blr
1131
1132 mmu_off:
1133 addi r4, r3, __after_mmu_off - _start
1134 mfmsr r3
1135 andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
1136 beqlr
1137 andc r3,r3,r0
1138 mtspr SPRN_SRR0,r4
1139 mtspr SPRN_SRR1,r3
1140 sync
1141 RFI
1142
1143 /*
1144 * On 601, we use 3 BATs to map up to 24M of RAM at _PAGE_OFFSET
1145 * (we keep one for debugging) and on others, we use one 256M BAT.
1146 */
1147 initial_bats:
1148 lis r11,PAGE_OFFSET@h
1149 mfspr r9,SPRN_PVR
1150 rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
1151 cmpwi 0,r9,1
1152 bne 4f
1153 ori r11,r11,4 /* set up BAT registers for 601 */
1154 li r8,0x7f /* valid, block length = 8MB */
1155 mtspr SPRN_IBAT0U,r11 /* N.B. 601 has valid bit in */
1156 mtspr SPRN_IBAT0L,r8 /* lower BAT register */
1157 addis r11,r11,0x800000@h
1158 addis r8,r8,0x800000@h
1159 mtspr SPRN_IBAT1U,r11
1160 mtspr SPRN_IBAT1L,r8
1161 addis r11,r11,0x800000@h
1162 addis r8,r8,0x800000@h
1163 mtspr SPRN_IBAT2U,r11
1164 mtspr SPRN_IBAT2L,r8
1165 isync
1166 blr
1167
1168 4: tophys(r8,r11)
1169 #ifdef CONFIG_SMP
1170 ori r8,r8,0x12 /* R/W access, M=1 */
1171 #else
1172 ori r8,r8,2 /* R/W access */
1173 #endif /* CONFIG_SMP */
1174 ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
1175
1176 mtspr SPRN_DBAT0L,r8 /* N.B. 6xx (not 601) have valid */
1177 mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
1178 mtspr SPRN_IBAT0L,r8
1179 mtspr SPRN_IBAT0U,r11
1180 isync
1181 blr
1182
1183
1184 #ifdef CONFIG_BOOTX_TEXT
1185 setup_disp_bat:
1186 /*
1187 * setup the display bat prepared for us in prom.c
1188 */
1189 mflr r8
1190 bl reloc_offset
1191 mtlr r8
1192 addis r8,r3,disp_BAT@ha
1193 addi r8,r8,disp_BAT@l
1194 cmpwi cr0,r8,0
1195 beqlr
1196 lwz r11,0(r8)
1197 lwz r8,4(r8)
1198 mfspr r9,SPRN_PVR
1199 rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
1200 cmpwi 0,r9,1
1201 beq 1f
1202 mtspr SPRN_DBAT3L,r8
1203 mtspr SPRN_DBAT3U,r11
1204 blr
1205 1: mtspr SPRN_IBAT3L,r8
1206 mtspr SPRN_IBAT3U,r11
1207 blr
1208 #endif /* CONFIG_BOOTX_TEXT */
1209
1210 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
1211 setup_cpm_bat:
1212 lis r8, 0xf000
1213 ori r8, r8, 0x002a
1214 mtspr SPRN_DBAT1L, r8
1215
1216 lis r11, 0xf000
1217 ori r11, r11, (BL_1M << 2) | 2
1218 mtspr SPRN_DBAT1U, r11
1219
1220 blr
1221 #endif
1222
1223 #ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
1224 setup_usbgecko_bat:
1225 /* prepare a BAT for early io */
1226 #if defined(CONFIG_GAMECUBE)
1227 lis r8, 0x0c00
1228 #elif defined(CONFIG_WII)
1229 lis r8, 0x0d00
1230 #else
1231 #error Invalid platform for USB Gecko based early debugging.
1232 #endif
1233 /*
1234 * The virtual address used must match the virtual address
1235 * associated to the fixmap entry FIX_EARLY_DEBUG_BASE.
1236 */
1237 lis r11, 0xfffe /* top 128K */
1238 ori r8, r8, 0x002a /* uncached, guarded ,rw */
1239 ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */
1240 mtspr SPRN_DBAT1L, r8
1241 mtspr SPRN_DBAT1U, r11
1242 blr
1243 #endif
1244
1245 #ifdef CONFIG_8260
1246 /* Jump into the system reset for the rom.
1247 * We first disable the MMU, and then jump to the ROM reset address.
1248 *
1249 * r3 is the board info structure, r4 is the location for starting.
1250 * I use this for building a small kernel that can load other kernels,
1251 * rather than trying to write or rely on a rom monitor that can tftp load.
1252 */
1253 .globl m8260_gorom
1254 m8260_gorom:
1255 mfmsr r0
1256 rlwinm r0,r0,0,17,15 /* clear MSR_EE in r0 */
1257 sync
1258 mtmsr r0
1259 sync
1260 mfspr r11, SPRN_HID0
1261 lis r10, 0
1262 ori r10,r10,HID0_ICE|HID0_DCE
1263 andc r11, r11, r10
1264 mtspr SPRN_HID0, r11
1265 isync
1266 li r5, MSR_ME|MSR_RI
1267 lis r6,2f@h
1268 addis r6,r6,-KERNELBASE@h
1269 ori r6,r6,2f@l
1270 mtspr SPRN_SRR0,r6
1271 mtspr SPRN_SRR1,r5
1272 isync
1273 sync
1274 rfi
1275 2:
1276 mtlr r4
1277 blr
1278 #endif
1279
1280
1281 /*
1282 * We put a few things here that have to be page-aligned.
1283 * This stuff goes at the beginning of the data segment,
1284 * which is page-aligned.
1285 */
1286 .data
1287 .globl sdata
1288 sdata:
1289 .globl empty_zero_page
1290 empty_zero_page:
1291 .space 4096
1292
1293 .globl swapper_pg_dir
1294 swapper_pg_dir:
1295 .space PGD_TABLE_SIZE
1296
1297 .globl intercept_table
1298 intercept_table:
1299 .long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700
1300 .long i0x800, 0, 0, 0, 0, i0xd00, 0, 0
1301 .long 0, 0, 0, i0x1300, 0, 0, 0, 0
1302 .long 0, 0, 0, 0, 0, 0, 0, 0
1303 .long 0, 0, 0, 0, 0, 0, 0, 0
1304 .long 0, 0, 0, 0, 0, 0, 0, 0
1305
1306 /* Room for two PTE pointers, usually the kernel and current user pointers
1307 * to their respective root page table.
1308 */
1309 abatron_pteptrs:
1310 .space 8
kernel source for telekom puls (alcatel/mediatek)