arch/parisc/Kconfig

   1 config PARISC
   2         def_bool y
   3         select HAVE_IDE
   4         select HAVE_OPROFILE
   5         select HAVE_FUNCTION_TRACER if 64BIT
   6         select HAVE_FUNCTION_GRAPH_TRACER if 64BIT
   7         select HAVE_FUNCTION_TRACE_MCOUNT_TEST if 64BIT
   8         select RTC_CLASS
   9         select RTC_DRV_GENERIC
  10         select INIT_ALL_POSSIBLE
  11         select BUG
  12         select HAVE_PERF_EVENTS
  13         select GENERIC_ATOMIC64 if !64BIT
  14         select HAVE_GENERIC_HARDIRQS
  15         select BROKEN_RODATA
  16         select GENERIC_IRQ_PROBE
  17         select GENERIC_PCI_IOMAP
  18         select ARCH_HAVE_NMI_SAFE_CMPXCHG
  19         select GENERIC_SMP_IDLE_THREAD
  20         select GENERIC_STRNCPY_FROM_USER
  21         select HAVE_MOD_ARCH_SPECIFIC
  22         select MODULES_USE_ELF_RELA
  23         select CLONE_BACKWARDS
  24         select TTY # Needed for pdc_cons.c
  25
  26         help
  27           The PA-RISC microprocessor is designed by Hewlett-Packard and used
  28           in many of their workstations & servers (HP9000 700 and 800 series,
  29           and later HP3000 series).  The PA-RISC Linux project home page is
  30           at <http://www.parisc-linux.org/>.
  31
  32 config MMU
  33         def_bool y
  34
  35 config STACK_GROWSUP
  36         def_bool y
  37
  38 config GENERIC_LOCKBREAK
  39         bool
  40         default y
  41         depends on SMP && PREEMPT
  42
  43 config RWSEM_GENERIC_SPINLOCK
  44         def_bool y
  45
  46 config RWSEM_XCHGADD_ALGORITHM
  47         bool
  48
  49 config ARCH_HAS_ILOG2_U32
  50         bool
  51         default n
  52
  53 config ARCH_HAS_ILOG2_U64
  54         bool
  55         default n
  56
  57 config GENERIC_BUG
  58         bool
  59         default y
  60         depends on BUG
  61
  62 config GENERIC_HWEIGHT
  63         bool
  64         default y
  65
  66 config GENERIC_CALIBRATE_DELAY
  67         bool
  68         default y
  69
  70 config TIME_LOW_RES
  71         bool
  72         depends on SMP
  73         default y
  74
  75 config HAVE_LATENCYTOP_SUPPORT
  76         def_bool y
  77
  78 # unless you want to implement ACPI on PA-RISC ... ;-)
  79 config PM
  80         bool
  81
  82 config STACKTRACE_SUPPORT
  83         def_bool y
  84
  85 config NEED_DMA_MAP_STATE
  86         def_bool y
  87
  88 config NEED_SG_DMA_LENGTH
  89         def_bool y
  90
  91 config ISA_DMA_API
  92         bool
  93
  94 config ARCH_MAY_HAVE_PC_FDC
  95         bool
  96         depends on BROKEN
  97         default y
  98
  99 source "init/Kconfig"
 100
 101 source "kernel/Kconfig.freezer"
 102
 103
 104 menu "Processor type and features"
 105
 106 choice
 107         prompt "Processor type"
 108         default PA7000
 109
 110 config PA7000
 111         bool "PA7000/PA7100"
 112         ---help---
 113           This is the processor type of your CPU.  This information is
 114           used for optimizing purposes.  In order to compile a kernel
 115           that can run on all 32-bit PA CPUs (albeit not optimally fast),
 116           you can specify "PA7000" here.
 117
 118           Specifying "PA8000" here will allow you to select a 64-bit kernel
 119           which is required on some machines.
 120
 121 config PA7100LC
 122         bool "PA7100LC"
 123         help
 124           Select this option for the PCX-L processor, as used in the
 125           712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
 126           D200, D210, D300, D310 and E-class
 127
 128 config PA7200
 129         bool "PA7200"
 130         help
 131           Select this option for the PCX-T' processor, as used in the
 132           C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
 133           K100, K200, K210, K220, K400, K410 and K420
 134
 135 config PA7300LC
 136         bool "PA7300LC"
 137         help
 138           Select this option for the PCX-L2 processor, as used in the
 139           744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
 140           D220, D230, D320 and D330.
 141
 142 config PA8X00
 143         bool "PA8000 and up"
 144         help
 145           Select this option for PCX-U to PCX-W2 processors.
 146
 147 endchoice
 148
 149 # Define implied options from the CPU selection here
 150
 151 config PA20
 152         def_bool y
 153         depends on PA8X00
 154
 155 config PA11
 156         def_bool y
 157         depends on PA7000 || PA7100LC || PA7200 || PA7300LC
 158
 159 config PREFETCH
 160         def_bool y
 161         depends on PA8X00 || PA7200
 162
 163 config MLONGCALLS
 164         bool "Enable the -mlong-calls compiler option for big kernels"
 165         def_bool y if (!MODULES)
 166         depends on PA8X00
 167         help
 168           If you configure the kernel to include many drivers built-in instead
 169           as modules, the kernel executable may become too big, so that the
 170           linker will not be able to resolve some long branches and fails to link
 171           your vmlinux kernel. In that case enabling this option will help you
 172           to overcome this limit by using the -mlong-calls compiler option.
 173
 174           Usually you want to say N here, unless you e.g. want to build
 175           a kernel which includes all necessary drivers built-in and which can
 176           be used for TFTP booting without the need to have an initrd ramdisk.
 177
 178           Enabling this option will probably slow down your kernel.
 179
 180 config 64BIT
 181         bool "64-bit kernel"
 182         depends on PA8X00
 183         help
 184           Enable this if you want to support 64bit kernel on PA-RISC platform.
 185
 186           At the moment, only people willing to use more than 2GB of RAM,
 187           or having a 64bit-only capable PA-RISC machine should say Y here.
 188
 189           Since there is no 64bit userland on PA-RISC, there is no point to
 190           enable this option otherwise. The 64bit kernel is significantly bigger
 191           and slower than the 32bit one.
 192
 193 choice
 194         prompt "Kernel page size"
 195         default PARISC_PAGE_SIZE_4KB
 196
 197 config PARISC_PAGE_SIZE_4KB
 198         bool "4KB"
 199         help
 200           This lets you select the page size of the kernel.  For best
 201           performance, a page size of 16KB is recommended.  For best
 202           compatibility with 32bit applications, a page size of 4KB should be
 203           selected (the vast majority of 32bit binaries work perfectly fine
 204           with a larger page size).
 205
 206           4KB                For best 32bit compatibility
 207           16KB               For best performance
 208           64KB               For best performance, might give more overhead.
 209
 210           If you don't know what to do, choose 4KB.
 211
 212 config PARISC_PAGE_SIZE_16KB
 213         bool "16KB"
 214         depends on PA8X00
 215
 216 config PARISC_PAGE_SIZE_64KB
 217         bool "64KB"
 218         depends on PA8X00
 219
 220 endchoice
 221
 222 config SMP
 223         bool "Symmetric multi-processing support"
 224         select USE_GENERIC_SMP_HELPERS
 225         ---help---
 226           This enables support for systems with more than one CPU. If you have
 227           a system with only one CPU, like most personal computers, say N. If
 228           you have a system with more than one CPU, say Y.
 229
 230           If you say N here, the kernel will run on single and multiprocessor
 231           machines, but will use only one CPU of a multiprocessor machine. If
 232           you say Y here, the kernel will run on many, but not all,
 233           singleprocessor machines. On a singleprocessor machine, the kernel
 234           will run faster if you say N here.
 235
 236           See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO
 237           available at <http://www.tldp.org/docs.html#howto>.
 238
 239           If you don't know what to do here, say N.
 240
 241 config HOTPLUG_CPU
 242         bool
 243         default y if SMP
 244         select HOTPLUG
 245
 246 config ARCH_SELECT_MEMORY_MODEL
 247         def_bool y
 248         depends on 64BIT
 249
 250 config ARCH_DISCONTIGMEM_ENABLE
 251         def_bool y
 252         depends on 64BIT
 253
 254 config ARCH_FLATMEM_ENABLE
 255         def_bool y
 256
 257 config ARCH_DISCONTIGMEM_DEFAULT
 258         def_bool y
 259         depends on ARCH_DISCONTIGMEM_ENABLE
 260
 261 config NODES_SHIFT
 262         int
 263         default "3"
 264         depends on NEED_MULTIPLE_NODES
 265
 266 source "kernel/Kconfig.preempt"
 267 source "kernel/Kconfig.hz"
 268 source "mm/Kconfig"
 269
 270 config COMPAT
 271         def_bool y
 272         depends on 64BIT
 273
 274 config SYSVIPC_COMPAT
 275         def_bool y
 276         depends on COMPAT && SYSVIPC
 277
 278 config HPUX
 279         bool "Support for HP-UX binaries"
 280         depends on !64BIT
 281
 282 config NR_CPUS
 283         int "Maximum number of CPUs (2-32)"
 284         range 2 32
 285         depends on SMP
 286         default "32"
 287
 288 endmenu
 289
 290
 291 source "drivers/parisc/Kconfig"
 292
 293
 294 menu "Executable file formats"
 295
 296 source "fs/Kconfig.binfmt"
 297
 298 endmenu
 299
 300 source "net/Kconfig"
 301
 302 source "drivers/Kconfig"
 303
 304 source "fs/Kconfig"
 305
 306 source "arch/parisc/Kconfig.debug"
 307
 308 source "security/Kconfig"
 309
 310 source "crypto/Kconfig"
 311
 312 source "lib/Kconfig"