arch/mips/alchemy/devboards/db1x00/board_setup.c

   1 /*
   2  *
   3  * BRIEF MODULE DESCRIPTION
   4  *      Alchemy Db1x00 board setup.
   5  *
   6  * Copyright 2000, 2008 MontaVista Software Inc.
   7  * Author: MontaVista Software, Inc. <source@mvista.com>
   8  *
   9  *  This program is free software; you can redistribute  it and/or modify it
  10  *  under  the terms of  the GNU General  Public License as published by the
  11  *  Free Software Foundation;  either version 2 of the  License, or (at your
  12  *  option) any later version.
  13  *
  14  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
  15  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
  16  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
  17  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
  18  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  19  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
  20  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
  21  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
  22  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  23  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  24  *
  25  *  You should have received a copy of the  GNU General Public License along
  26  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  27  *  675 Mass Ave, Cambridge, MA 02139, USA.
  28  */
  29
  30 #include <linux/gpio.h>
  31 #include <linux/init.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/pm.h>
  34
  35 #include <asm/mach-au1x00/au1000.h>
  36 #include <asm/mach-au1x00/au1xxx_eth.h>
  37 #include <asm/mach-db1x00/db1x00.h>
  38 #include <asm/mach-db1x00/bcsr.h>
  39 #include <asm/reboot.h>
  40
  41 #include <prom.h>
  42
  43 #ifdef CONFIG_MIPS_DB1500
  44 char irq_tab_alchemy[][5] __initdata = {
  45         [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371   */
  46         [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
  47 };
  48
  49 #endif
  50
  51
  52 #ifdef CONFIG_MIPS_DB1550
  53 char irq_tab_alchemy[][5] __initdata = {
  54         [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */
  55         [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */
  56         [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */
  57 };
  58 #endif
  59
  60
  61 #ifdef CONFIG_MIPS_BOSPORUS
  62 char irq_tab_alchemy[][5] __initdata = {
  63         [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI  */
  64         [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741   */
  65         [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
  66 };
  67
  68 /*
  69  * Micrel/Kendin 5 port switch attached to MAC0,
  70  * MAC0 is associated with PHY address 5 (== WAN port)
  71  * MAC1 is not associated with any PHY, since it's connected directly
  72  * to the switch.
  73  * no interrupts are used
  74  */
  75 static struct au1000_eth_platform_data eth0_pdata = {
  76         .phy_static_config      = 1,
  77         .phy_addr               = 5,
  78 };
  79
  80 static void bosporus_power_off(void)
  81 {
  82         while (1)
  83                 asm volatile (".set mips3 ; wait ; .set mips0");
  84 }
  85
  86 const char *get_system_type(void)
  87 {
  88         return "Alchemy Bosporus Gateway Reference";
  89 }
  90 #endif
  91
  92
  93 #ifdef CONFIG_MIPS_MIRAGE
  94 char irq_tab_alchemy[][5] __initdata = {
  95         [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */
  96         [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
  97         [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
  98 };
  99
 100 static void mirage_power_off(void)
 101 {
 102         alchemy_gpio_direction_output(210, 1);
 103 }
 104
 105 const char *get_system_type(void)
 106 {
 107         return "Alchemy Mirage";
 108 }
 109 #endif
 110
 111
 112 #if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
 113 static void mips_softreset(void)
 114 {
 115         asm volatile ("jr\t%0" : : "r"(0xbfc00000));
 116 }
 117
 118 #else
 119
 120 const char *get_system_type(void)
 121 {
 122         return "Alchemy Db1x00";
 123 }
 124 #endif
 125
 126
 127 void __init board_setup(void)
 128 {
 129         unsigned long bcsr1, bcsr2;
 130         u32 pin_func;
 131
 132         bcsr1 = DB1000_BCSR_PHYS_ADDR;
 133         bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS;
 134
 135         pin_func = 0;
 136
 137 #ifdef CONFIG_MIPS_DB1000
 138         printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
 139 #endif
 140 #ifdef CONFIG_MIPS_DB1500
 141         printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
 142 #endif
 143 #ifdef CONFIG_MIPS_DB1100
 144         printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
 145 #endif
 146 #ifdef CONFIG_MIPS_BOSPORUS
 147         au1xxx_override_eth_cfg(0, &eth0_pdata);
 148
 149         printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
 150 #endif
 151 #ifdef CONFIG_MIPS_MIRAGE
 152         printk(KERN_INFO "AMD Alchemy Mirage Board\n");
 153 #endif
 154 #ifdef CONFIG_MIPS_DB1550
 155         printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
 156
 157         bcsr1 = DB1550_BCSR_PHYS_ADDR;
 158         bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS;
 159 #endif
 160
 161         /* initialize board register space */
 162         bcsr_init(bcsr1, bcsr2);
 163
 164         /* Not valid for Au1550 */
 165 #if defined(CONFIG_IRDA) && \
 166    (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
 167         /* Set IRFIRSEL instead of GPIO15 */
 168         pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
 169         au_writel(pin_func, SYS_PINFUNC);
 170         /* Power off until the driver is in use */
 171         bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
 172                                 BCSR_RESETS_IRDA_MODE_OFF);
 173 #endif
 174         bcsr_write(BCSR_PCMCIA, 0);     /* turn off PCMCIA power */
 175
 176         /* Enable GPIO[31:0] inputs */
 177         alchemy_gpio1_input_enable();
 178
 179 #ifdef CONFIG_MIPS_MIRAGE
 180         /* GPIO[20] is output */
 181         alchemy_gpio_direction_output(20, 0);
 182
 183         /* Set GPIO[210:208] instead of SSI_0 */
 184         pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
 185
 186         /* Set GPIO[215:211] for LEDs */
 187         pin_func |= 5 << 2;
 188
 189         /* Set GPIO[214:213] for more LEDs */
 190         pin_func |= 5 << 12;
 191
 192         /* Set GPIO[207:200] instead of PCMCIA/LCD */
 193         pin_func |= SYS_PF_LCD | SYS_PF_PC;
 194         au_writel(pin_func, SYS_PINFUNC);
 195
 196         /*
 197          * Enable speaker amplifier.  This should
 198          * be part of the audio driver.
 199          */
 200         alchemy_gpio_direction_output(209, 1);
 201
 202         pm_power_off = mirage_power_off;
 203         _machine_halt = mirage_power_off;
 204         _machine_restart = (void(*)(char *))mips_softreset;
 205 #endif
 206
 207 #ifdef CONFIG_MIPS_BOSPORUS
 208         pm_power_off = bosporus_power_off;
 209         _machine_halt = bosporus_power_off;
 210         _machine_restart = (void(*)(char *))mips_softreset;
 211 #endif
 212         au_sync();
 213 }
 214
 215 static int __init db1x00_init_irq(void)
 216 {
 217 #if defined(CONFIG_MIPS_MIRAGE)
 218         irq_set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */
 219 #elif defined(CONFIG_MIPS_DB1550)
 220         irq_set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW);  /* CD0# */
 221         irq_set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW);  /* CD1# */
 222         irq_set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW);  /* CARD0# */
 223         irq_set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW);  /* CARD1# */
 224         irq_set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
 225         irq_set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
 226 #elif defined(CONFIG_MIPS_DB1500)
 227         irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
 228         irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
 229         irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
 230         irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
 231         irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
 232         irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
 233 #elif defined(CONFIG_MIPS_DB1100)
 234         irq_set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
 235         irq_set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
 236         irq_set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
 237         irq_set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
 238         irq_set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
 239         irq_set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
 240 #elif defined(CONFIG_MIPS_DB1000)
 241         irq_set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */
 242         irq_set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */
 243         irq_set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */
 244         irq_set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */
 245         irq_set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */
 246         irq_set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */
 247 #endif
 248         return 0;
 249 }
 250 arch_initcall(db1x00_init_irq);