arch/cris/Kconfig

   1 #
   2 # For a description of the syntax of this configuration file,
   3 # see the Configure script.
   4 #
   5
   6 mainmenu "Linux/CRIS Kernel Configuration"
   7
   8 config MMU
   9         bool
  10         default y
  11
  12 config ZONE_DMA
  13         bool
  14         default y
  15
  16 config RWSEM_GENERIC_SPINLOCK
  17         bool
  18         default y
  19
  20 config RWSEM_XCHGADD_ALGORITHM
  21         bool
  22
  23 config GENERIC_CMOS_UPDATE
  24         def_bool y
  25
  26 config ARCH_USES_GETTIMEOFFSET
  27         def_bool y
  28
  29 config GENERIC_IOMAP
  30        bool
  31        default y
  32
  33 config ARCH_HAS_ILOG2_U32
  34         bool
  35         default n
  36
  37 config ARCH_HAS_ILOG2_U64
  38         bool
  39         default n
  40
  41 config GENERIC_FIND_NEXT_BIT
  42         bool
  43         default y
  44
  45 config GENERIC_HWEIGHT
  46         bool
  47         default y
  48
  49 config GENERIC_CALIBRATE_DELAY
  50         bool
  51         default y
  52
  53 config NO_IOPORT
  54         def_bool y
  55
  56 config FORCE_MAX_ZONEORDER
  57         int
  58         default 6
  59
  60 config CRIS
  61         bool
  62         default y
  63         select HAVE_IDE
  64
  65 config HZ
  66         int
  67         default 100
  68
  69 source "init/Kconfig"
  70
  71 source "kernel/Kconfig.freezer"
  72
  73 menu "General setup"
  74
  75 source "fs/Kconfig.binfmt"
  76
  77 config GENERIC_HARDIRQS
  78         bool
  79         default y
  80
  81 config ETRAX_CMDLINE
  82         string "Kernel command line"
  83         default "root=/dev/mtdblock3"
  84         help
  85           Pass additional commands to the kernel.
  86
  87 config ETRAX_WATCHDOG
  88         bool "Enable ETRAX watchdog"
  89         help
  90           Enable the built-in watchdog timer support on ETRAX based embedded
  91           network computers.
  92
  93 config ETRAX_WATCHDOG_NICE_DOGGY
  94         bool "Disable watchdog during Oops printouts"
  95         depends on ETRAX_WATCHDOG
  96         help
  97           By enabling this you make sure that the watchdog does not bite while
  98           printing oopses. Recommended for development systems but not for
  99           production releases.
 100
 101 config ETRAX_FAST_TIMER
 102        bool "Enable ETRAX fast timer API"
 103        help
 104          This options enables the API to a fast timer implementation using
 105          timer1 to get sub jiffie resolution timers (primarily one-shot
 106          timers).
 107          This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
 108
 109 config ETRAX_KMALLOCED_MODULES
 110         bool "Enable module allocation with kmalloc"
 111         help
 112           Enable module allocation with kmalloc instead of vmalloc.
 113
 114 config OOM_REBOOT
 115        bool "Enable reboot at out of memory"
 116
 117 source "kernel/Kconfig.preempt"
 118
 119 source mm/Kconfig
 120
 121 endmenu
 122
 123 menu "Hardware setup"
 124
 125 choice
 126         prompt "Processor type"
 127         default ETRAX100LX
 128
 129 config ETRAX100LX
 130         bool "ETRAX-100LX-v1"
 131         help
 132           Support version 1 of the ETRAX 100LX.
 133
 134 config ETRAX100LX_V2
 135         bool "ETRAX-100LX-v2"
 136         help
 137           Support version 2 of the ETRAX 100LX.
 138
 139 config SVINTO_SIM
 140         bool "ETRAX-100LX-for-xsim-simulator"
 141         help
 142           Support the xsim ETRAX Simulator.
 143
 144 config ETRAXFS
 145         bool "ETRAX-FS-V32"
 146         help
 147           Support CRIS V32.
 148
 149 config CRIS_MACH_ARTPEC3
 150         bool "ARTPEC-3"
 151         help
 152           Support Axis ARTPEC-3.
 153
 154 endchoice
 155
 156 config ETRAX_VCS_SIM
 157         bool "VCS Simulator"
 158         help
 159           Setup hardware to be run in the VCS simulator.
 160
 161 config ETRAX_ARCH_V10
 162        bool
 163        default y if ETRAX100LX || ETRAX100LX_V2
 164        default n if !(ETRAX100LX || ETRAX100LX_V2)
 165
 166 config ETRAX_ARCH_V32
 167        bool
 168        default y if (ETRAXFS || CRIS_MACH_ARTPEC3)
 169        default n if !(ETRAXFS || CRIS_MACH_ARTPEC3)
 170
 171 config ETRAX_DRAM_SIZE
 172         int "DRAM size (dec, in MB)"
 173         default "8"
 174         help
 175           Size of DRAM (decimal in MB) typically 2, 8 or 16.
 176
 177 config ETRAX_VMEM_SIZE
 178        int "Video memory size (dec, in MB)"
 179        depends on ETRAX_ARCH_V32 && !ETRAXFS
 180        default 8 if !ETRAXFS
 181        help
 182         Size of Video accessible memory (decimal, in MB).
 183
 184 config ETRAX_FLASH_BUSWIDTH
 185         int "Buswidth of NOR flash in bytes"
 186         default "2"
 187         help
 188           Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
 189
 190 config ETRAX_NANDFLASH_BUSWIDTH
 191         int "Buswidth of NAND flash in bytes"
 192         default "1"
 193         help
 194           Width in bytes of the NAND flash (1 or 2).
 195
 196 config ETRAX_FLASH1_SIZE
 197        int "FLASH1 size (dec, in MB. 0 = Unknown)"
 198        default "0"
 199
 200 choice
 201         prompt "Product debug-port"
 202         default ETRAX_DEBUG_PORT0
 203
 204 config ETRAX_DEBUG_PORT0
 205         bool "Serial-0"
 206         help
 207           Choose a serial port for the ETRAX debug console.  Default to
 208           port 0.
 209
 210 config ETRAX_DEBUG_PORT1
 211         bool "Serial-1"
 212         help
 213           Use serial port 1 for the console.
 214
 215 config ETRAX_DEBUG_PORT2
 216         bool "Serial-2"
 217         help
 218           Use serial port 2 for the console.
 219
 220 config ETRAX_DEBUG_PORT3
 221         bool "Serial-3"
 222         help
 223           Use serial port 3 for the console.
 224
 225 config ETRAX_DEBUG_PORT_NULL
 226         bool "disabled"
 227         help
 228           Disable serial-port debugging.
 229
 230 endchoice
 231
 232 choice
 233         prompt "Kernel GDB port"
 234         depends on ETRAX_KGDB
 235         default ETRAX_KGDB_PORT0
 236         help
 237           Choose a serial port for kernel debugging.  NOTE: This port should
 238           not be enabled under Drivers for built-in interfaces (as it has its
 239           own initialization code) and should not be the same as the debug port.
 240
 241 config ETRAX_KGDB_PORT0
 242         bool "Serial-0"
 243         help
 244           Use serial port 0 for kernel debugging.
 245
 246 config ETRAX_KGDB_PORT1
 247         bool "Serial-1"
 248         help
 249           Use serial port 1 for kernel debugging.
 250
 251 config ETRAX_KGDB_PORT2
 252         bool "Serial-2"
 253         help
 254           Use serial port 2 for kernel debugging.
 255
 256 config ETRAX_KGDB_PORT3
 257         bool "Serial-3"
 258         help
 259           Use serial port 3 for kernel debugging.
 260
 261 endchoice
 262
 263 source arch/cris/arch-v10/Kconfig
 264 source arch/cris/arch-v32/Kconfig
 265
 266 endmenu
 267
 268 source "net/Kconfig"
 269
 270 # bring in ETRAX built-in drivers
 271 menu "Drivers for built-in interfaces"
 272 source arch/cris/arch-v10/drivers/Kconfig
 273 source arch/cris/arch-v32/drivers/Kconfig
 274
 275 config ETRAX_AXISFLASHMAP
 276         bool "Axis flash-map support"
 277         select MTD
 278         select MTD_CFI
 279         select MTD_CFI_AMDSTD
 280         select MTD_JEDECPROBE if ETRAX_ARCH_V32
 281         select MTD_CHAR
 282         select MTD_BLOCK
 283         select MTD_PARTITIONS
 284         select MTD_CONCAT
 285         select MTD_COMPLEX_MAPPINGS
 286         help
 287           This option enables MTD mapping of flash devices.  Needed to use
 288           flash memories.  If unsure, say Y.
 289
 290 config ETRAX_RTC
 291         bool "Real Time Clock support"
 292         depends on ETRAX_I2C
 293         help
 294           Enables drivers for the Real-Time Clock battery-backed chips on
 295           some products. The kernel reads the time when booting, and
 296           the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
 297           rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
 298           device.  You can check the time with cat /proc/rtc, but
 299           normal time reading should be done using libc function time and
 300           friends.
 301
 302 choice
 303         prompt "RTC chip"
 304         depends on ETRAX_RTC
 305         default ETRAX_PCF8563 if ETRAX_ARCH_V32
 306         default ETRAX_DS1302 if ETRAX_ARCH_V10
 307
 308 config ETRAX_DS1302
 309         depends on ETRAX_ARCH_V10
 310         bool "DS1302"
 311         help
 312           Enables the driver for the DS1302 Real-Time Clock battery-backed
 313           chip on some products.
 314
 315 config ETRAX_PCF8563
 316         bool "PCF8563"
 317         help
 318           Enables the driver for the PCF8563 Real-Time Clock battery-backed
 319           chip on some products.
 320
 321 endchoice
 322
 323 config ETRAX_SYNCHRONOUS_SERIAL
 324         bool "Synchronous serial-port support"
 325         help
 326           Select this to enable the synchronous serial port driver.
 327
 328 config ETRAX_SYNCHRONOUS_SERIAL_PORT0
 329         bool "Synchronous serial port 0 enabled"
 330         depends on ETRAX_SYNCHRONOUS_SERIAL
 331         help
 332           Enabled synchronous serial port 0.
 333
 334 config ETRAX_SYNCHRONOUS_SERIAL0_DMA
 335         bool "Enable DMA on synchronous serial port 0."
 336         depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
 337         help
 338           A synchronous serial port can run in manual or DMA mode.
 339           Selecting this option will make it run in DMA mode.
 340
 341 config ETRAX_SYNCHRONOUS_SERIAL_PORT1
 342         bool "Synchronous serial port 1 enabled"
 343         depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10)
 344         help
 345           Enabled synchronous serial port 1.
 346
 347 config ETRAX_SYNCHRONOUS_SERIAL1_DMA
 348         bool "Enable DMA on synchronous serial port 1."
 349         depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
 350         help
 351           A synchronous serial port can run in manual or DMA mode.
 352           Selecting this option will make it run in DMA mode.
 353
 354 choice
 355         prompt "Network LED behavior"
 356         depends on ETRAX_ETHERNET
 357         default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
 358
 359 config ETRAX_NETWORK_LED_ON_WHEN_LINK
 360         bool "LED_on_when_link"
 361         help
 362           Selecting LED_on_when_link will light the LED when there is a
 363           connection and will flash off when there is activity.
 364
 365           Selecting LED_on_when_activity will light the LED only when
 366           there is activity.
 367
 368           This setting will also affect the behaviour of other activity LEDs
 369           e.g. Bluetooth.
 370
 371 config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
 372         bool "LED_on_when_activity"
 373         help
 374           Selecting LED_on_when_link will light the LED when there is a
 375           connection and will flash off when there is activity.
 376
 377           Selecting LED_on_when_activity will light the LED only when
 378           there is activity.
 379
 380           This setting will also affect the behaviour of other activity LEDs
 381           e.g. Bluetooth.
 382
 383 endchoice
 384
 385 choice
 386         prompt "Ser0 DMA out channel"
 387         depends on ETRAX_SERIAL_PORT0
 388         default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32
 389         default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10
 390
 391 config ETRAX_SERIAL_PORT0_NO_DMA_OUT
 392         bool "Ser0 uses no DMA for output"
 393         help
 394           Do not use DMA for ser0 output.
 395
 396 config ETRAX_SERIAL_PORT0_DMA6_OUT
 397         bool "Ser0 uses DMA6 for output"
 398         depends on ETRAXFS
 399         help
 400           Enables the DMA6 output channel for ser0 (ttyS0).
 401           If you do not enable DMA, an interrupt for each character will be
 402           used when transmitting data.
 403           Normally you want to use DMA, unless you use the DMA channel for
 404           something else.
 405
 406 config ETRAX_SERIAL_PORT0_DMA0_OUT
 407         bool "Ser0 uses DMA0 for output"
 408         depends on CRIS_MACH_ARTPEC3
 409         help
 410           Enables the DMA0 output channel for ser0 (ttyS0).
 411           If you do not enable DMA, an interrupt for each character will be
 412           used when transmitting data.
 413           Normally you want to use DMA, unless you use the DMA channel for
 414           something else.
 415
 416 endchoice
 417
 418 choice
 419         prompt "Ser0 DMA in channel "
 420         depends on ETRAX_SERIAL_PORT0
 421         default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32
 422         default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10
 423         help
 424           What DMA channel to use for ser0.
 425
 426 config ETRAX_SERIAL_PORT0_NO_DMA_IN
 427         bool "Ser0 uses no DMA for input"
 428         help
 429           Do not use DMA for ser0 input.
 430
 431 config ETRAX_SERIAL_PORT0_DMA7_IN
 432         bool "Ser0 uses DMA7 for input"
 433         depends on ETRAXFS
 434         help
 435           Enables the DMA7 input channel for ser0 (ttyS0).
 436           If you do not enable DMA, an interrupt for each character will be
 437           used when receiving data.
 438           Normally you want to use DMA, unless you use the DMA channel for
 439           something else.
 440
 441 config ETRAX_SERIAL_PORT0_DMA1_IN
 442         bool "Ser0 uses DMA1 for input"
 443         depends on CRIS_MACH_ARTPEC3
 444         help
 445           Enables the DMA1 input channel for ser0 (ttyS0).
 446           If you do not enable DMA, an interrupt for each character will be
 447           used when receiving data.
 448           Normally you want to use DMA, unless you use the DMA channel for
 449           something else.
 450
 451 endchoice
 452
 453 choice
 454         prompt "Ser1 DMA in channel "
 455         depends on ETRAX_SERIAL_PORT1
 456         default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32
 457         default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10
 458         help
 459           What DMA channel to use for ser1.
 460
 461 config ETRAX_SERIAL_PORT1_NO_DMA_IN
 462         bool "Ser1 uses no DMA for input"
 463         help
 464           Do not use DMA for ser1 input.
 465
 466 config ETRAX_SERIAL_PORT1_DMA5_IN
 467         bool "Ser1 uses DMA5 for input"
 468         depends on ETRAX_ARCH_V32
 469         help
 470           Enables the DMA5 input channel for ser1 (ttyS1).
 471           If you do not enable DMA, an interrupt for each character will be
 472           used when receiving data.
 473           Normally you want this on, unless you use the DMA channel for
 474           something else.
 475
 476 config ETRAX_SERIAL_PORT1_DMA9_IN
 477         depends on ETRAX_ARCH_V10
 478         bool "Ser1 uses DMA9 for input"
 479
 480 endchoice
 481
 482
 483 choice
 484         prompt "Ser1 DMA out channel"
 485         depends on ETRAX_SERIAL_PORT1
 486         default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32
 487         default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10
 488         help
 489           What DMA channel to use for ser1.
 490
 491 config ETRAX_SERIAL_PORT1_NO_DMA_OUT
 492         bool "Ser1 uses no DMA for output"
 493         help
 494           Do not use DMA for ser1 output.
 495
 496 config ETRAX_SERIAL_PORT1_DMA8_OUT
 497         depends on ETRAX_ARCH_V10
 498         bool "Ser1 uses DMA8 for output"
 499
 500 config ETRAX_SERIAL_PORT1_DMA4_OUT
 501         depends on ETRAX_ARCH_V32
 502         bool "Ser1 uses DMA4 for output"
 503         help
 504           Enables the DMA4 output channel for ser1 (ttyS1).
 505           If you do not enable DMA, an interrupt for each character will be
 506           used when transmitting data.
 507           Normally you want this on, unless you use the DMA channel for
 508           something else.
 509
 510 endchoice
 511
 512 choice
 513         prompt "Ser2 DMA out channel"
 514         depends on ETRAX_SERIAL_PORT2
 515         default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32
 516         default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10
 517
 518 config ETRAX_SERIAL_PORT2_NO_DMA_OUT
 519         bool "Ser2 uses no DMA for output"
 520         help
 521           Do not use DMA for ser2 output.
 522
 523 config ETRAX_SERIAL_PORT2_DMA2_OUT
 524         bool "Ser2 uses DMA2 for output"
 525         depends on ETRAXFS || ETRAX_ARCH_V10
 526         help
 527           Enables the DMA2 output channel for ser2 (ttyS2).
 528           If you do not enable DMA, an interrupt for each character will be
 529           used when transmitting data.
 530           Normally you want to use DMA, unless you use the DMA channel for
 531           something else.
 532
 533 config ETRAX_SERIAL_PORT2_DMA6_OUT
 534         bool "Ser2 uses DMA6 for output"
 535         depends on CRIS_MACH_ARTPEC3
 536         help
 537           Enables the DMA6 output channel for ser2 (ttyS2).
 538           If you do not enable DMA, an interrupt for each character will be
 539           used when transmitting data.
 540           Normally you want to use DMA, unless you use the DMA channel for
 541           something else.
 542
 543 endchoice
 544
 545 choice
 546         prompt "Ser2 DMA in channel"
 547         depends on ETRAX_SERIAL_PORT2
 548         default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32
 549         default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10
 550         help
 551           What DMA channel to use for ser2.
 552
 553 config ETRAX_SERIAL_PORT2_NO_DMA_IN
 554         bool "Ser2 uses no DMA for input"
 555         help
 556           Do not use DMA for ser2 input.
 557
 558 config ETRAX_SERIAL_PORT2_DMA3_IN
 559         bool "Ser2 uses DMA3 for input"
 560         depends on ETRAXFS || ETRAX_ARCH_V10
 561         help
 562           Enables the DMA3 input channel for ser2 (ttyS2).
 563           If you do not enable DMA, an interrupt for each character will be
 564           used when receiving data.
 565           Normally you want to use DMA, unless you use the DMA channel for
 566           something else.
 567
 568 config ETRAX_SERIAL_PORT2_DMA7_IN
 569         bool "Ser2 uses DMA7 for input"
 570         depends on CRIS_MACH_ARTPEC3
 571         help
 572           Enables the DMA7 input channel for ser2 (ttyS2).
 573           If you do not enable DMA, an interrupt for each character will be
 574           used when receiving data.
 575           Normally you want to use DMA, unless you use the DMA channel for
 576           something else.
 577
 578 endchoice
 579
 580 choice
 581         prompt "Ser3 DMA in channel"
 582         depends on ETRAX_SERIAL_PORT3
 583         default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32
 584         default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10
 585         help
 586           What DMA channel to use for ser3.
 587
 588 config ETRAX_SERIAL_PORT3_NO_DMA_IN
 589         bool "Ser3 uses no DMA for input"
 590         help
 591           Do not use DMA for ser3 input.
 592
 593 config ETRAX_SERIAL_PORT3_DMA5_IN
 594         depends on ETRAX_ARCH_V10
 595         bool "DMA 5"
 596
 597 config ETRAX_SERIAL_PORT3_DMA9_IN
 598         bool "Ser3 uses DMA9 for input"
 599         depends on ETRAXFS
 600         help
 601           Enables the DMA9 input channel for ser3 (ttyS3).
 602           If you do not enable DMA, an interrupt for each character will be
 603           used when receiving data.
 604           Normally you want to use DMA, unless you use the DMA channel for
 605           something else.
 606
 607 config ETRAX_SERIAL_PORT3_DMA3_IN
 608         bool "Ser3 uses DMA3 for input"
 609         depends on CRIS_MACH_ARTPEC3
 610         help
 611           Enables the DMA3 input channel for ser3 (ttyS3).
 612           If you do not enable DMA, an interrupt for each character will be
 613           used when receiving data.
 614           Normally you want to use DMA, unless you use the DMA channel for
 615           something else.
 616
 617 endchoice
 618
 619 choice
 620         prompt "Ser3 DMA out channel"
 621         depends on ETRAX_SERIAL_PORT3
 622         default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32
 623         default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10
 624
 625 config ETRAX_SERIAL_PORT3_NO_DMA_OUT
 626         bool "Ser3 uses no DMA for output"
 627         help
 628           Do not use DMA for ser3 output.
 629
 630 config ETRAX_SERIAL_PORT3_DMA4_OUT
 631         depends on ETRAX_ARCH_V10
 632         bool "DMA 4"
 633
 634 config ETRAX_SERIAL_PORT3_DMA8_OUT
 635         bool "Ser3 uses DMA8 for output"
 636         depends on ETRAXFS
 637         help
 638           Enables the DMA8 output channel for ser3 (ttyS3).
 639           If you do not enable DMA, an interrupt for each character will be
 640           used when transmitting data.
 641           Normally you want to use DMA, unless you use the DMA channel for
 642           something else.
 643
 644 config ETRAX_SERIAL_PORT3_DMA2_OUT
 645         bool "Ser3 uses DMA2 for output"
 646         depends on CRIS_MACH_ARTPEC3
 647         help
 648           Enables the DMA2 output channel for ser3 (ttyS3).
 649           If you do not enable DMA, an interrupt for each character will be
 650           used when transmitting data.
 651           Normally you want to use DMA, unless you use the DMA channel for
 652           something else.
 653
 654 endchoice
 655
 656 endmenu
 657
 658 source "drivers/base/Kconfig"
 659
 660 # standard linux drivers
 661 source "drivers/mtd/Kconfig"
 662
 663 source "drivers/parport/Kconfig"
 664
 665 source "drivers/pnp/Kconfig"
 666
 667 source "drivers/block/Kconfig"
 668
 669 source "drivers/ide/Kconfig"
 670
 671 source "drivers/net/Kconfig"
 672
 673 source "drivers/i2c/Kconfig"
 674
 675 source "drivers/rtc/Kconfig"
 676
 677 #
 678 # input before char - char/joystick depends on it. As does USB.
 679 #
 680 source "drivers/input/Kconfig"
 681
 682 source "drivers/char/Kconfig"
 683
 684 source "fs/Kconfig"
 685
 686 source "drivers/usb/Kconfig"
 687
 688 source "drivers/uwb/Kconfig"
 689
 690 source "drivers/staging/Kconfig"
 691
 692 source "arch/cris/Kconfig.debug"
 693
 694 source "security/Kconfig"
 695
 696 source "crypto/Kconfig"
 697
 698 source "lib/Kconfig"