arch/blackfin/mach-bf533/boards/H8606.c

   1 /*
   2  * File:         arch/blackfin/mach-bf533/H8606.c
   3  * Based on:     arch/blackfin/mach-bf533/stamp.c
   4  * Author:       Javier Herrero <jherrero@hvsistemas.es>
   5  *
   6  * Created:      2007
   7  * Description:  Board Info File for the HV Sistemas H8606 board
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2006 Analog Devices Inc
  12  *               Copyright 2007,2008 HV Sistemas S.L.
  13  *
  14  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  15  *
  16  * This program is free software; you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License as published by
  18  * the Free Software Foundation; either version 2 of the License, or
  19  * (at your option) any later version.
  20  *
  21  * This program is distributed in the hope that it will be useful,
  22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  24  * GNU General Public License for more details.
  25  *
  26  * You should have received a copy of the GNU General Public License
  27  * along with this program; if not, see the file COPYING, or write
  28  * to the Free Software Foundation, Inc.,
  29  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  30  */
  31
  32 #include <linux/device.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/mtd/mtd.h>
  35 #include <linux/mtd/partitions.h>
  36 #include <linux/spi/spi.h>
  37 #include <linux/spi/flash.h>
  38 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  39 #include <linux/usb/isp1362.h>
  40 #endif
  41 #include <linux/irq.h>
  42
  43 #include <asm/dma.h>
  44 #include <asm/bfin5xx_spi.h>
  45 #include <asm/reboot.h>
  46 #include <asm/portmux.h>
  47
  48 /*
  49  * Name the Board for the /proc/cpuinfo
  50  */
  51 const char bfin_board_name[] = "HV Sistemas H8606";
  52
  53 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
  54 static struct platform_device rtc_device = {
  55         .name = "rtc-bfin",
  56         .id   = -1,
  57 };
  58 #endif
  59
  60 /*
  61 *  Driver needs to know address, irq and flag pin.
  62  */
  63  #if    defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
  64 static struct resource dm9000_resources[] = {
  65         [0] = {
  66                 .start  = 0x20300000,
  67                 .end    = 0x20300002,
  68                 .flags  = IORESOURCE_MEM,
  69         },
  70         [1] = {
  71                 .start  = 0x20300004,
  72                 .end    = 0x20300006,
  73                 .flags  = IORESOURCE_MEM,
  74         },
  75         [2] = {
  76                 .start  = IRQ_PF10,
  77                 .end    = IRQ_PF10,
  78                 .flags  = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IRQF_SHARED | IRQF_TRIGGER_HIGH),
  79         },
  80 };
  81
  82 static struct platform_device dm9000_device = {
  83     .id                 = 0,
  84     .name               = "dm9000",
  85     .resource           = dm9000_resources,
  86     .num_resources      = ARRAY_SIZE(dm9000_resources),
  87 };
  88 #endif
  89
  90 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
  91 static struct resource smc91x_resources[] = {
  92         {
  93                 .name = "smc91x-regs",
  94                 .start = 0x20300300,
  95                 .end = 0x20300300 + 16,
  96                 .flags = IORESOURCE_MEM,
  97         }, {
  98                 .start = IRQ_PROG_INTB,
  99                 .end = IRQ_PROG_INTB,
 100                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 101         }, {
 102                 .start = IRQ_PF7,
 103                 .end = IRQ_PF7,
 104                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 105         },
 106 };
 107
 108 static struct platform_device smc91x_device = {
 109         .name = "smc91x",
 110         .id = 0,
 111         .num_resources = ARRAY_SIZE(smc91x_resources),
 112         .resource = smc91x_resources,
 113 };
 114 #endif
 115
 116 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 117 static struct resource net2272_bfin_resources[] = {
 118         {
 119                 .start = 0x20300000,
 120                 .end = 0x20300000 + 0x100,
 121                 .flags = IORESOURCE_MEM,
 122         }, {
 123                 .start = IRQ_PF10,
 124                 .end = IRQ_PF10,
 125                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 126         },
 127 };
 128
 129 static struct platform_device net2272_bfin_device = {
 130         .name = "net2272",
 131         .id = -1,
 132         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 133         .resource = net2272_bfin_resources,
 134 };
 135 #endif
 136
 137 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 138 /* all SPI peripherals info goes here */
 139
 140 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 141 static struct mtd_partition bfin_spi_flash_partitions[] = {
 142         {
 143                 .name = "bootloader (spi)",
 144                 .size = 0x40000,
 145                 .offset = 0,
 146                 .mask_flags = MTD_CAP_ROM
 147         }, {
 148                 .name = "fpga (spi)",
 149                 .size =   0x30000,
 150                 .offset = 0x40000
 151         }, {
 152                 .name = "linux kernel (spi)",
 153                 .size =   0x150000,
 154                 .offset =  0x70000
 155         }, {
 156                 .name = "jffs2 root file system (spi)",
 157                 .size =   0x640000,
 158                 .offset = 0x1c0000,
 159         }
 160 };
 161
 162 static struct flash_platform_data bfin_spi_flash_data = {
 163         .name = "m25p80",
 164         .parts = bfin_spi_flash_partitions,
 165         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
 166         .type = "m25p64",
 167 };
 168
 169 /* SPI flash chip (m25p64) */
 170 static struct bfin5xx_spi_chip spi_flash_chip_info = {
 171         .enable_dma = 0,         /* use dma transfer with this chip*/
 172         .bits_per_word = 8,
 173 };
 174 #endif
 175
 176 #if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
 177 /* SPI ADC chip */
 178 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 179         .ctl_reg = 0x1000,
 180         .enable_dma = 1,         /* use dma transfer with this chip*/
 181         .bits_per_word = 16,
 182 };
 183 #endif
 184
 185 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 186 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 187         .ctl_reg = 0x1000,
 188         .enable_dma = 0,
 189         .bits_per_word = 16,
 190 };
 191 #endif
 192
 193 #if defined(CONFIG_PBX)
 194 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
 195         .ctl_reg        = 0x1c04,
 196         .enable_dma     = 0,
 197         .bits_per_word  = 8,
 198         .cs_change_per_word = 1,
 199 };
 200 #endif
 201
 202 /* Notice: for blackfin, the speed_hz is the value of register
 203  * SPI_BAUD, not the real baudrate */
 204 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 205 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 206         {
 207                 /* the modalias must be the same as spi device driver name */
 208                 .modalias = "m25p80", /* Name of spi_driver for this device */
 209                 /* this value is the baudrate divisor */
 210                 .max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */
 211                 .bus_num = 0, /* Framework bus number */
 212                 .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
 213                 .platform_data = &bfin_spi_flash_data,
 214                 .controller_data = &spi_flash_chip_info,
 215                 .mode = SPI_MODE_3,
 216         },
 217 #endif
 218
 219 #if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)
 220         {
 221                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 222                 .max_speed_hz = 4,     /* actual baudrate is SCLK/(2xspeed_hz) */
 223                 .bus_num = 1, /* Framework bus number */
 224                 .chip_select = 1, /* Framework chip select. */
 225                 .platform_data = NULL, /* No spi_driver specific config */
 226                 .controller_data = &spi_adc_chip_info,
 227         },
 228 #endif
 229
 230 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 231         {
 232                 .modalias = "ad1836-spi",
 233                 .max_speed_hz = 16,
 234                 .bus_num = 1,
 235                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 236                 .controller_data = &ad1836_spi_chip_info,
 237         },
 238 #endif
 239
 240 #if defined(CONFIG_PBX)
 241         {
 242                 .modalias        = "fxs-spi",
 243                 .max_speed_hz    = 4,
 244                 .bus_num         = 1,
 245                 .chip_select     = 3,
 246                 .controller_data = &spi_si3xxx_chip_info,
 247         },
 248
 249         {
 250                 .modalias        = "fxo-spi",
 251                 .max_speed_hz    = 4,
 252                 .bus_num         = 1,
 253                 .chip_select     = 2,
 254                 .controller_data = &spi_si3xxx_chip_info,
 255         },
 256 #endif
 257 };
 258
 259 /* SPI (0) */
 260 static struct resource bfin_spi0_resource[] = {
 261         [0] = {
 262                 .start = SPI0_REGBASE,
 263                 .end   = SPI0_REGBASE + 0xFF,
 264                 .flags = IORESOURCE_MEM,
 265         },
 266         [1] = {
 267                 .start = CH_SPI,
 268                 .end   = CH_SPI,
 269                 .flags = IORESOURCE_IRQ,
 270         }
 271 };
 272
 273
 274 /* SPI controller data */
 275 static struct bfin5xx_spi_master bfin_spi0_info = {
 276         .num_chipselect = 8,
 277         .enable_dma = 1,  /* master has the ability to do dma transfer */
 278         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 279 };
 280
 281 static struct platform_device bfin_spi0_device = {
 282         .name = "bfin-spi",
 283         .id = 0, /* Bus number */
 284         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 285         .resource = bfin_spi0_resource,
 286         .dev = {
 287                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 288         },
 289 };
 290 #endif  /* spi master and devices */
 291
 292 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 293 static struct platform_device bfin_fb_device = {
 294         .name = "bf537-fb",
 295 };
 296 #endif
 297
 298 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 299 static struct resource bfin_uart_resources[] = {
 300         {
 301                 .start = 0xFFC00400,
 302                 .end = 0xFFC004FF,
 303                 .flags = IORESOURCE_MEM,
 304         },
 305 };
 306
 307 static struct platform_device bfin_uart_device = {
 308         .name = "bfin-uart",
 309         .id = 1,
 310         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 311         .resource = bfin_uart_resources,
 312 };
 313 #endif
 314
 315 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 316 #ifdef CONFIG_BFIN_SIR0
 317 static struct resource bfin_sir0_resources[] = {
 318         {
 319                 .start = 0xFFC00400,
 320                 .end = 0xFFC004FF,
 321                 .flags = IORESOURCE_MEM,
 322         },
 323         {
 324                 .start = IRQ_UART0_RX,
 325                 .end = IRQ_UART0_RX+1,
 326                 .flags = IORESOURCE_IRQ,
 327         },
 328         {
 329                 .start = CH_UART0_RX,
 330                 .end = CH_UART0_RX+1,
 331                 .flags = IORESOURCE_DMA,
 332         },
 333 };
 334
 335 static struct platform_device bfin_sir0_device = {
 336         .name = "bfin_sir",
 337         .id = 0,
 338         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 339         .resource = bfin_sir0_resources,
 340 };
 341 #endif
 342 #endif
 343
 344 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 345
 346 #include <linux/serial_8250.h>
 347 #include <linux/serial.h>
 348
 349 /*
 350  * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010.
 351  * running at half system clock, both with interrupt output or-ed to PF8. Change to
 352  * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus
 353  */
 354
 355 static struct plat_serial8250_port serial8250_platform_data [] = {
 356         {
 357                 .membase = (void *)0x20200000,
 358                 .mapbase = 0x20200000,
 359                 .irq = IRQ_PF8,
 360                 .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
 361                 .iotype = UPIO_MEM,
 362                 .regshift = 1,
 363                 .uartclk = 66666667,
 364         }, {
 365                 .membase = (void *)0x20200010,
 366                 .mapbase = 0x20200010,
 367                 .irq = IRQ_PF8,
 368                 .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
 369                 .iotype = UPIO_MEM,
 370                 .regshift = 1,
 371                 .uartclk = 66666667,
 372         }, {
 373         }
 374 };
 375
 376 static struct platform_device serial8250_device = {
 377         .id             = PLAT8250_DEV_PLATFORM,
 378         .name           = "serial8250",
 379         .dev            = {
 380                 .platform_data = serial8250_platform_data,
 381         },
 382 };
 383
 384 #endif
 385
 386 #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
 387
 388 /*
 389  * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
 390  * interrupt output wired to PF9. Change to suit different FPGA configuration
 391  */
 392
 393 static struct resource opencores_kbd_resources[] = {
 394         [0] = {
 395                 .start  = 0x20200030,
 396                 .end    = 0x20300030 + 2,
 397                 .flags  = IORESOURCE_MEM,
 398         },
 399         [1] = {
 400                 .start  = IRQ_PF9,
 401                 .end    = IRQ_PF9,
 402                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 403         },
 404 };
 405
 406 static struct platform_device opencores_kbd_device = {
 407         .id             = -1,
 408         .name           = "opencores-kbd",
 409         .resource       = opencores_kbd_resources,
 410         .num_resources  = ARRAY_SIZE(opencores_kbd_resources),
 411 };
 412 #endif
 413
 414 static struct platform_device *h8606_devices[] __initdata = {
 415 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 416         &rtc_device,
 417 #endif
 418
 419 #if     defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
 420         &dm9000_device,
 421 #endif
 422
 423 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 424         &smc91x_device,
 425 #endif
 426
 427 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 428         &net2272_bfin_device,
 429 #endif
 430
 431 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 432         &bfin_spi0_device,
 433 #endif
 434
 435 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 436         &bfin_uart_device,
 437 #endif
 438
 439 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 440         &serial8250_device,
 441 #endif
 442
 443 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 444 #ifdef CONFIG_BFIN_SIR0
 445         &bfin_sir0_device,
 446 #endif
 447 #endif
 448
 449 #if defined(CONFIG_KEYBOARD_OPENCORES) || defined(CONFIG_KEYBOARD_OPENCORES_MODULE)
 450         &opencores_kbd_device,
 451 #endif
 452 };
 453
 454 static int __init H8606_init(void)
 455 {
 456         printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
 457         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 458         platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
 459 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 460         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 461 #endif
 462         return 0;
 463 }
 464
 465 arch_initcall(H8606_init);