arch/arm/plat-omap/Kconfig

   1 if ARCH_OMAP
   2
   3 menu "TI OMAP Common Features"
   4
   5 config ARCH_OMAP_OTG
   6         bool
   7
   8 comment "OMAP Feature Selections"
   9
  10 config OMAP_DEBUG_DEVICES
  11         bool
  12         help
  13           For debug cards on TI reference boards.
  14
  15 config OMAP_DEBUG_LEDS
  16         def_bool y if NEW_LEDS
  17         depends on OMAP_DEBUG_DEVICES
  18         select LEDS_CLASS
  19
  20 config POWER_AVS_OMAP
  21         bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
  22         depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
  23         select POWER_SUPPLY
  24         help
  25           Say Y to enable AVS(Adaptive Voltage Scaling)
  26           support on OMAP containing the version 1 or
  27           version 2 of the SmartReflex IP.
  28           V1 is the 65nm version used in OMAP3430.
  29           V2 is the update for the 45nm version of the IP used in OMAP3630
  30           and OMAP4430
  31
  32           Please note, that by default SmartReflex is only
  33           initialized and not enabled. To enable the automatic voltage
  34           compensation for vdd mpu and vdd core from user space,
  35           user must write 1 to
  36                 /debug/smartreflex/sr_<X>/autocomp,
  37           where X is mpu_iva or core for OMAP3.
  38           Optionally autocompensation can be enabled in the kernel
  39           by default during system init via the enable_on_init flag
  40           which an be passed as platform data to the smartreflex driver.
  41
  42 config POWER_AVS_OMAP_CLASS3
  43         bool "Class 3 mode of Smartreflex Implementation"
  44         depends on POWER_AVS_OMAP && TWL4030_CORE
  45         help
  46           Say Y to enable Class 3 implementation of Smartreflex
  47
  48           Class 3 implementation of Smartreflex employs continuous hardware
  49           voltage calibration.
  50
  51 config OMAP_RESET_CLOCKS
  52         bool "Reset unused clocks during boot"
  53         depends on ARCH_OMAP
  54         help
  55           Say Y if you want to reset unused clocks during boot.
  56           This option saves power, but assumes all drivers are
  57           using the clock framework. Broken drivers that do not
  58           yet use clock framework may not work with this option.
  59           If you are booting from another operating system, you
  60           probably do not want this option enabled until your
  61           device drivers work properly.
  62
  63 config OMAP_MUX
  64         bool "OMAP multiplexing support"
  65         depends on ARCH_OMAP
  66         default y
  67         help
  68           Pin multiplexing support for OMAP boards. If your bootloader
  69           sets the multiplexing correctly, say N. Otherwise, or if unsure,
  70           say Y.
  71
  72 config OMAP_MUX_DEBUG
  73         bool "Multiplexing debug output"
  74         depends on OMAP_MUX
  75         help
  76           Makes the multiplexing functions print out a lot of debug info.
  77           This is useful if you want to find out the correct values of the
  78           multiplexing registers.
  79
  80 config OMAP_MUX_WARNINGS
  81         bool "Warn about pins the bootloader didn't set up"
  82         depends on OMAP_MUX
  83         default y
  84         help
  85           Choose Y here to warn whenever driver initialization logic needs
  86           to change the pin multiplexing setup.  When there are no warnings
  87           printed, it's safe to deselect OMAP_MUX for your product.
  88
  89 config OMAP_MBOX_FWK
  90         tristate "Mailbox framework support"
  91         depends on ARCH_OMAP && !ARCH_MULTIPLATFORM
  92         help
  93           Say Y here if you want to use OMAP Mailbox framework support for
  94           DSP, IVA1.0 and IVA2 in OMAP1/2/3.
  95
  96 config OMAP_MBOX_KFIFO_SIZE
  97         int "Mailbox kfifo default buffer size (bytes)"
  98         depends on OMAP_MBOX_FWK
  99         default 256
 100         help
 101           Specify the default size of mailbox's kfifo buffers (bytes).
 102           This can also be changed at runtime (via the mbox_kfifo_size
 103           module parameter).
 104
 105 config OMAP_IOMMU_IVA2
 106         bool
 107
 108 config OMAP_MPU_TIMER
 109         bool "Use mpu timer"
 110         depends on ARCH_OMAP1
 111         help
 112           Select this option if you want to use the OMAP mpu timer. This
 113           timer provides more intra-tick resolution than the 32KHz timer,
 114           but consumes more power.
 115
 116 config OMAP_32K_TIMER
 117         bool "Use 32KHz timer"
 118         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 119         default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
 120         help
 121           Select this option if you want to enable the OMAP 32KHz timer.
 122           This timer saves power compared to the OMAP_MPU_TIMER, and has
 123           support for no tick during idle. The 32KHz timer provides less
 124           intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
 125           currently only available for OMAP16XX, 24XX, 34XX and OMAP4/5.
 126
 127           On OMAP2PLUS this value is only used for CONFIG_HZ and
 128           CLOCK_TICK_RATE compile time calculation.
 129           The actual timer selection is done in the board file
 130           through the (DT_)MACHINE_START structure.
 131
 132
 133 config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 134         bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
 135         depends on ARCH_OMAP3 && PM
 136         default n
 137         help
 138           Without this option, L2 Auxiliary control register contents are
 139           lost during off-mode entry on HS/EMU devices. This feature
 140           requires support from PPA / boot-loader in HS/EMU devices, which
 141           currently does not exist by default.
 142
 143 config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
 144         int "Service ID for the support routine to set L2 AUX control"
 145         depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 146         default 43
 147         help
 148           PPA routine service ID for setting L2 auxiliary control register.
 149
 150 config OMAP_DM_TIMER
 151         bool "Use dual-mode timer"
 152         depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
 153         help
 154          Select this option if you want to use OMAP Dual-Mode timers.
 155
 156 config OMAP_SERIAL_WAKE
 157         bool "Enable wake-up events for serial ports"
 158         depends on ARCH_OMAP1 && OMAP_MUX
 159         default y
 160         help
 161           Select this option if you want to have your system wake up
 162           to data on the serial RX line. This allows you to wake the
 163           system from serial console.
 164
 165 choice
 166         prompt "OMAP PM layer selection"
 167         depends on ARCH_OMAP
 168         default OMAP_PM_NOOP
 169
 170 config OMAP_PM_NOOP
 171         bool "No-op/debug PM layer"
 172
 173 endchoice
 174
 175 endmenu
 176
 177 endif