arch/arm/mach-s5pv310/platsmp.c

   1 /* linux/arch/arm/mach-s5pv310/platsmp.c
   2  *
   3  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
   4  *              http://www.samsung.com/
   5  *
   6  * Cloned from linux/arch/arm/mach-vexpress/platsmp.c
   7  *
   8  *  Copyright (C) 2002 ARM Ltd.
   9  *  All Rights Reserved
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14 */
  15
  16 #include <linux/init.h>
  17 #include <linux/errno.h>
  18 #include <linux/delay.h>
  19 #include <linux/device.h>
  20 #include <linux/jiffies.h>
  21 #include <linux/smp.h>
  22 #include <linux/io.h>
  23
  24 #include <asm/cacheflush.h>
  25 #include <asm/smp_scu.h>
  26 #include <asm/unified.h>
  27
  28 #include <mach/hardware.h>
  29 #include <mach/regs-clock.h>
  30
  31 extern void s5pv310_secondary_startup(void);
  32
  33 /*
  34  * control for which core is the next to come out of the secondary
  35  * boot "holding pen"
  36  */
  37
  38 volatile int __cpuinitdata pen_release = -1;
  39
  40 /*
  41  * Write pen_release in a way that is guaranteed to be visible to all
  42  * observers, irrespective of whether they're taking part in coherency
  43  * or not.  This is necessary for the hotplug code to work reliably.
  44  */
  45 static void write_pen_release(int val)
  46 {
  47         pen_release = val;
  48         smp_wmb();
  49         __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
  50         outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
  51 }
  52
  53 static void __iomem *scu_base_addr(void)
  54 {
  55         return (void __iomem *)(S5P_VA_SCU);
  56 }
  57
  58 static DEFINE_SPINLOCK(boot_lock);
  59
  60 void __cpuinit platform_secondary_init(unsigned int cpu)
  61 {
  62         /*
  63          * if any interrupts are already enabled for the primary
  64          * core (e.g. timer irq), then they will not have been enabled
  65          * for us: do so
  66          */
  67         gic_secondary_init(0);
  68
  69         /*
  70          * let the primary processor know we're out of the
  71          * pen, then head off into the C entry point
  72          */
  73         write_pen_release(-1);
  74
  75         /*
  76          * Synchronise with the boot thread.
  77          */
  78         spin_lock(&boot_lock);
  79         spin_unlock(&boot_lock);
  80 }
  81
  82 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
  83 {
  84         unsigned long timeout;
  85
  86         /*
  87          * Set synchronisation state between this boot processor
  88          * and the secondary one
  89          */
  90         spin_lock(&boot_lock);
  91
  92         /*
  93          * The secondary processor is waiting to be released from
  94          * the holding pen - release it, then wait for it to flag
  95          * that it has been released by resetting pen_release.
  96          *
  97          * Note that "pen_release" is the hardware CPU ID, whereas
  98          * "cpu" is Linux's internal ID.
  99          */
 100         write_pen_release(cpu);
 101
 102         /*
 103          * Send the secondary CPU a soft interrupt, thereby causing
 104          * the boot monitor to read the system wide flags register,
 105          * and branch to the address found there.
 106          */
 107         smp_cross_call(cpumask_of(cpu), 1);
 108
 109         timeout = jiffies + (1 * HZ);
 110         while (time_before(jiffies, timeout)) {
 111                 smp_rmb();
 112                 if (pen_release == -1)
 113                         break;
 114
 115                 udelay(10);
 116         }
 117
 118         /*
 119          * now the secondary core is starting up let it run its
 120          * calibrations, then wait for it to finish
 121          */
 122         spin_unlock(&boot_lock);
 123
 124         return pen_release != -1 ? -ENOSYS : 0;
 125 }
 126
 127 /*
 128  * Initialise the CPU possible map early - this describes the CPUs
 129  * which may be present or become present in the system.
 130  */
 131
 132 void __init smp_init_cpus(void)
 133 {
 134         void __iomem *scu_base = scu_base_addr();
 135         unsigned int i, ncores;
 136
 137         ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 138
 139         /* sanity check */
 140         if (ncores > NR_CPUS) {
 141                 printk(KERN_WARNING
 142                        "S5PV310: no. of cores (%d) greater than configured "
 143                        "maximum of %d - clipping\n",
 144                        ncores, NR_CPUS);
 145                 ncores = NR_CPUS;
 146         }
 147
 148         for (i = 0; i < ncores; i++)
 149                 set_cpu_possible(i, true);
 150 }
 151
 152 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 153 {
 154         int i;
 155
 156         /*
 157          * Initialise the present map, which describes the set of CPUs
 158          * actually populated at the present time.
 159          */
 160         for (i = 0; i < max_cpus; i++)
 161                 set_cpu_present(i, true);
 162
 163         scu_enable(scu_base_addr());
 164
 165         /*
 166          * Write the address of secondary startup into the
 167          * system-wide flags register. The boot monitor waits
 168          * until it receives a soft interrupt, and then the
 169          * secondary CPU branches to this address.
 170          */
 171         __raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM);
 172 }