arch/arm/mach-s5pv310/mach-smdkv310.c

   1 /* linux/arch/arm/mach-s5pv310/mach-smdkv310.c
   2  *
   3  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
   4  *              http://www.samsung.com/
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9 */
  10
  11 #include <linux/serial_core.h>
  12 #include <linux/gpio.h>
  13 #include <linux/mmc/host.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/smsc911x.h>
  16 #include <linux/io.h>
  17 #include <linux/i2c.h>
  18
  19 #include <asm/mach/arch.h>
  20 #include <asm/mach-types.h>
  21
  22 #include <plat/regs-serial.h>
  23 #include <plat/regs-srom.h>
  24 #include <plat/s5pv310.h>
  25 #include <plat/cpu.h>
  26 #include <plat/devs.h>
  27 #include <plat/sdhci.h>
  28 #include <plat/iic.h>
  29 #include <plat/pd.h>
  30
  31 #include <mach/map.h>
  32
  33 /* Following are default values for UCON, ULCON and UFCON UART registers */
  34 #define SMDKV310_UCON_DEFAULT   (S3C2410_UCON_TXILEVEL |        \
  35                                  S3C2410_UCON_RXILEVEL |        \
  36                                  S3C2410_UCON_TXIRQMODE |       \
  37                                  S3C2410_UCON_RXIRQMODE |       \
  38                                  S3C2410_UCON_RXFIFO_TOI |      \
  39                                  S3C2443_UCON_RXERR_IRQEN)
  40
  41 #define SMDKV310_ULCON_DEFAULT  S3C2410_LCON_CS8
  42
  43 #define SMDKV310_UFCON_DEFAULT  (S3C2410_UFCON_FIFOMODE |       \
  44                                  S5PV210_UFCON_TXTRIG4 |        \
  45                                  S5PV210_UFCON_RXTRIG4)
  46
  47 static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
  48         [0] = {
  49                 .hwport         = 0,
  50                 .flags          = 0,
  51                 .ucon           = SMDKV310_UCON_DEFAULT,
  52                 .ulcon          = SMDKV310_ULCON_DEFAULT,
  53                 .ufcon          = SMDKV310_UFCON_DEFAULT,
  54         },
  55         [1] = {
  56                 .hwport         = 1,
  57                 .flags          = 0,
  58                 .ucon           = SMDKV310_UCON_DEFAULT,
  59                 .ulcon          = SMDKV310_ULCON_DEFAULT,
  60                 .ufcon          = SMDKV310_UFCON_DEFAULT,
  61         },
  62         [2] = {
  63                 .hwport         = 2,
  64                 .flags          = 0,
  65                 .ucon           = SMDKV310_UCON_DEFAULT,
  66                 .ulcon          = SMDKV310_ULCON_DEFAULT,
  67                 .ufcon          = SMDKV310_UFCON_DEFAULT,
  68         },
  69         [3] = {
  70                 .hwport         = 3,
  71                 .flags          = 0,
  72                 .ucon           = SMDKV310_UCON_DEFAULT,
  73                 .ulcon          = SMDKV310_ULCON_DEFAULT,
  74                 .ufcon          = SMDKV310_UFCON_DEFAULT,
  75         },
  76 };
  77
  78 static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
  79         .cd_type                = S3C_SDHCI_CD_GPIO,
  80         .ext_cd_gpio            = S5PV310_GPK0(2),
  81         .ext_cd_gpio_invert     = 1,
  82         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
  83 #ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
  84         .max_width              = 8,
  85         .host_caps              = MMC_CAP_8_BIT_DATA,
  86 #endif
  87 };
  88
  89 static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
  90         .cd_type                = S3C_SDHCI_CD_GPIO,
  91         .ext_cd_gpio            = S5PV310_GPK0(2),
  92         .ext_cd_gpio_invert     = 1,
  93         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
  94 };
  95
  96 static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
  97         .cd_type                = S3C_SDHCI_CD_GPIO,
  98         .ext_cd_gpio            = S5PV310_GPK2(2),
  99         .ext_cd_gpio_invert     = 1,
 100         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
 101 #ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
 102         .max_width              = 8,
 103         .host_caps              = MMC_CAP_8_BIT_DATA,
 104 #endif
 105 };
 106
 107 static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
 108         .cd_type                = S3C_SDHCI_CD_GPIO,
 109         .ext_cd_gpio            = S5PV310_GPK2(2),
 110         .ext_cd_gpio_invert     = 1,
 111         .clk_type               = S3C_SDHCI_CLK_DIV_EXTERNAL,
 112 };
 113
 114 static struct resource smdkv310_smsc911x_resources[] = {
 115         [0] = {
 116                 .start  = S5PV310_PA_SROM_BANK(1),
 117                 .end    = S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
 118                 .flags  = IORESOURCE_MEM,
 119         },
 120         [1] = {
 121                 .start  = IRQ_EINT(5),
 122                 .end    = IRQ_EINT(5),
 123                 .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
 124         },
 125 };
 126
 127 static struct smsc911x_platform_config smsc9215_config = {
 128         .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
 129         .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 130         .flags          = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
 131         .phy_interface  = PHY_INTERFACE_MODE_MII,
 132         .mac            = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
 133 };
 134
 135 static struct platform_device smdkv310_smsc911x = {
 136         .name           = "smsc911x",
 137         .id             = -1,
 138         .num_resources  = ARRAY_SIZE(smdkv310_smsc911x_resources),
 139         .resource       = smdkv310_smsc911x_resources,
 140         .dev            = {
 141                 .platform_data  = &smsc9215_config,
 142         },
 143 };
 144
 145 static struct i2c_board_info i2c_devs1[] __initdata = {
 146         {I2C_BOARD_INFO("wm8994", 0x1a),},
 147 };
 148
 149 static struct platform_device *smdkv310_devices[] __initdata = {
 150         &s3c_device_hsmmc0,
 151         &s3c_device_hsmmc1,
 152         &s3c_device_hsmmc2,
 153         &s3c_device_hsmmc3,
 154         &s3c_device_i2c1,
 155         &s3c_device_rtc,
 156         &s3c_device_wdt,
 157         &s5pv310_device_ac97,
 158         &s5pv310_device_i2s0,
 159         &s5pv310_device_pd[PD_MFC],
 160         &s5pv310_device_pd[PD_G3D],
 161         &s5pv310_device_pd[PD_LCD0],
 162         &s5pv310_device_pd[PD_LCD1],
 163         &s5pv310_device_pd[PD_CAM],
 164         &s5pv310_device_pd[PD_TV],
 165         &s5pv310_device_pd[PD_GPS],
 166         &s5pv310_device_sysmmu,
 167         &samsung_asoc_dma,
 168         &smdkv310_smsc911x,
 169 };
 170
 171 static void __init smdkv310_smsc911x_init(void)
 172 {
 173         u32 cs1;
 174
 175         /* configure nCS1 width to 16 bits */
 176         cs1 = __raw_readl(S5P_SROM_BW) &
 177                 ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
 178         cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
 179                 (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
 180                 (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
 181                 S5P_SROM_BW__NCS1__SHIFT;
 182         __raw_writel(cs1, S5P_SROM_BW);
 183
 184         /* set timing for nCS1 suitable for ethernet chip */
 185         __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
 186                      (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
 187                      (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
 188                      (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
 189                      (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
 190                      (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
 191                      (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
 192 }
 193
 194 static void __init smdkv310_map_io(void)
 195 {
 196         s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 197         s3c24xx_init_clocks(24000000);
 198         s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 199 }
 200
 201 static void __init smdkv310_machine_init(void)
 202 {
 203         s3c_i2c1_set_platdata(NULL);
 204         i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 205
 206         smdkv310_smsc911x_init();
 207
 208         s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
 209         s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
 210         s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
 211         s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
 212
 213         platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 214 }
 215
 216 MACHINE_START(SMDKV310, "SMDKV310")
 217         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
 218         /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
 219         .boot_params    = S5P_PA_SDRAM + 0x100,
 220         .init_irq       = s5pv310_init_irq,
 221         .map_io         = smdkv310_map_io,
 222         .init_machine   = smdkv310_machine_init,
 223         .timer          = &s5pv310_timer,
 224 MACHINE_END