2f5e45e08f5caf9bca9f5fe7898d40a3b60c7316
[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / arm / mach-pxa / lubbock.c
1 /*
2 * linux/arch/arm/mach-pxa/lubbock.c
3 *
4 * Support for the Intel DBPXA250 Development Platform.
5 *
6 * Author: Nicolas Pitre
7 * Created: Jun 15, 2001
8 * Copyright: MontaVista Software Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
13 */
14 #include <linux/module.h>
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/sysdev.h>
19 #include <linux/major.h>
20 #include <linux/fb.h>
21 #include <linux/interrupt.h>
22 #include <linux/mtd/mtd.h>
23 #include <linux/mtd/partitions.h>
24 #include <linux/smc91x.h>
25
26 #include <linux/spi/spi.h>
27 #include <linux/spi/ads7846.h>
28 #include <mach/pxa2xx_spi.h>
29
30 #include <asm/setup.h>
31 #include <asm/memory.h>
32 #include <asm/mach-types.h>
33 #include <mach/hardware.h>
34 #include <asm/irq.h>
35 #include <asm/sizes.h>
36
37 #include <asm/mach/arch.h>
38 #include <asm/mach/map.h>
39 #include <asm/mach/irq.h>
40 #include <asm/mach/flash.h>
41
42 #include <asm/hardware/sa1111.h>
43
44 #include <mach/pxa25x.h>
45 #include <mach/gpio.h>
46 #include <mach/audio.h>
47 #include <mach/lubbock.h>
48 #include <mach/udc.h>
49 #include <mach/irda.h>
50 #include <mach/pxafb.h>
51 #include <mach/mmc.h>
52 #include <mach/pm.h>
53
54 #include "generic.h"
55 #include "clock.h"
56 #include "devices.h"
57
58 static unsigned long lubbock_pin_config[] __initdata = {
59 GPIO15_nCS_1, /* CS1 - Flash */
60 GPIO78_nCS_2, /* CS2 - Baseboard FGPA */
61 GPIO79_nCS_3, /* CS3 - SMC ethernet */
62 GPIO80_nCS_4, /* CS4 - SA1111 */
63
64 /* SSP data pins */
65 GPIO23_SSP1_SCLK,
66 GPIO25_SSP1_TXD,
67 GPIO26_SSP1_RXD,
68
69 /* AC97 */
70 GPIO28_AC97_BITCLK,
71 GPIO29_AC97_SDATA_IN_0,
72 GPIO30_AC97_SDATA_OUT,
73 GPIO31_AC97_SYNC,
74
75 /* LCD - 16bpp DSTN */
76 GPIOxx_LCD_DSTN_16BPP,
77
78 /* BTUART */
79 GPIO42_BTUART_RXD,
80 GPIO43_BTUART_TXD,
81 GPIO44_BTUART_CTS,
82 GPIO45_BTUART_RTS,
83
84 /* PC Card */
85 GPIO48_nPOE,
86 GPIO49_nPWE,
87 GPIO50_nPIOR,
88 GPIO51_nPIOW,
89 GPIO52_nPCE_1,
90 GPIO53_nPCE_2,
91 GPIO54_nPSKTSEL,
92 GPIO55_nPREG,
93 GPIO56_nPWAIT,
94 GPIO57_nIOIS16,
95
96 /* MMC */
97 GPIO6_MMC_CLK,
98 GPIO8_MMC_CS0,
99
100 /* wakeup */
101 GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
102 };
103
104 #define LUB_HEXLED __LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
105 #define LUB_MISC_WR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
106
107 void lubbock_set_hexled(uint32_t value)
108 {
109 LUB_HEXLED = value;
110 }
111
112 void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
113 {
114 unsigned long flags;
115
116 local_irq_save(flags);
117 LUB_MISC_WR = (LUB_MISC_WR & ~mask) | (set & mask);
118 local_irq_restore(flags);
119 }
120 EXPORT_SYMBOL(lubbock_set_misc_wr);
121
122 static unsigned long lubbock_irq_enabled;
123
124 static void lubbock_mask_irq(unsigned int irq)
125 {
126 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
127 LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
128 }
129
130 static void lubbock_unmask_irq(unsigned int irq)
131 {
132 int lubbock_irq = (irq - LUBBOCK_IRQ(0));
133 /* the irq can be acknowledged only if deasserted, so it's done here */
134 LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
135 LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
136 }
137
138 static struct irq_chip lubbock_irq_chip = {
139 .name = "FPGA",
140 .ack = lubbock_mask_irq,
141 .mask = lubbock_mask_irq,
142 .unmask = lubbock_unmask_irq,
143 };
144
145 static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
146 {
147 unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
148 do {
149 desc->chip->ack(irq); /* clear our parent irq */
150 if (likely(pending)) {
151 irq = LUBBOCK_IRQ(0) + __ffs(pending);
152 generic_handle_irq(irq);
153 }
154 pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
155 } while (pending);
156 }
157
158 static void __init lubbock_init_irq(void)
159 {
160 int irq;
161
162 pxa25x_init_irq();
163
164 /* setup extra lubbock irqs */
165 for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
166 set_irq_chip(irq, &lubbock_irq_chip);
167 set_irq_handler(irq, handle_level_irq);
168 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
169 }
170
171 set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
172 set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
173 }
174
175 #ifdef CONFIG_PM
176
177 static int lubbock_irq_resume(struct sys_device *dev)
178 {
179 LUB_IRQ_MASK_EN = lubbock_irq_enabled;
180 return 0;
181 }
182
183 static struct sysdev_class lubbock_irq_sysclass = {
184 .name = "cpld_irq",
185 .resume = lubbock_irq_resume,
186 };
187
188 static struct sys_device lubbock_irq_device = {
189 .cls = &lubbock_irq_sysclass,
190 };
191
192 static int __init lubbock_irq_device_init(void)
193 {
194 int ret = -ENODEV;
195
196 if (machine_is_lubbock()) {
197 ret = sysdev_class_register(&lubbock_irq_sysclass);
198 if (ret == 0)
199 ret = sysdev_register(&lubbock_irq_device);
200 }
201 return ret;
202 }
203
204 device_initcall(lubbock_irq_device_init);
205
206 #endif
207
208 static int lubbock_udc_is_connected(void)
209 {
210 return (LUB_MISC_RD & (1 << 9)) == 0;
211 }
212
213 static struct pxa2xx_udc_mach_info udc_info __initdata = {
214 .udc_is_connected = lubbock_udc_is_connected,
215 // no D+ pullup; lubbock can't connect/disconnect in software
216 };
217
218 static struct resource sa1111_resources[] = {
219 [0] = {
220 .start = 0x10000000,
221 .end = 0x10001fff,
222 .flags = IORESOURCE_MEM,
223 },
224 [1] = {
225 .start = LUBBOCK_SA1111_IRQ,
226 .end = LUBBOCK_SA1111_IRQ,
227 .flags = IORESOURCE_IRQ,
228 },
229 };
230
231 static struct platform_device sa1111_device = {
232 .name = "sa1111",
233 .id = -1,
234 .num_resources = ARRAY_SIZE(sa1111_resources),
235 .resource = sa1111_resources,
236 };
237
238 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
239 * you can select it to replace the ucb1400 by switching the touchscreen cable
240 * (to J5) and poking board registers (as done below). Else it's only useful
241 * for the temperature sensors.
242 */
243 static struct pxa2xx_spi_master pxa_ssp_master_info = {
244 .num_chipselect = 1,
245 };
246
247 static int lubbock_ads7846_pendown_state(void)
248 {
249 /* TS_BUSY is bit 8 in LUB_MISC_RD, but pendown is irq-only */
250 return 0;
251 }
252
253 static struct ads7846_platform_data ads_info = {
254 .model = 7846,
255 .vref_delay_usecs = 100, /* internal, no cap */
256 .get_pendown_state = lubbock_ads7846_pendown_state,
257 // .x_plate_ohms = 500, /* GUESS! */
258 // .y_plate_ohms = 500, /* GUESS! */
259 };
260
261 static void ads7846_cs(u32 command)
262 {
263 static const unsigned TS_nCS = 1 << 11;
264 lubbock_set_misc_wr(TS_nCS, (command == PXA2XX_CS_ASSERT) ? 0 : TS_nCS);
265 }
266
267 static struct pxa2xx_spi_chip ads_hw = {
268 .tx_threshold = 1,
269 .rx_threshold = 2,
270 .cs_control = ads7846_cs,
271 };
272
273 static struct spi_board_info spi_board_info[] __initdata = { {
274 .modalias = "ads7846",
275 .platform_data = &ads_info,
276 .controller_data = &ads_hw,
277 .irq = LUBBOCK_BB_IRQ,
278 .max_speed_hz = 120000 /* max sample rate at 3V */
279 * 26 /* command + data + overhead */,
280 .bus_num = 1,
281 .chip_select = 0,
282 },
283 };
284
285 static struct resource smc91x_resources[] = {
286 [0] = {
287 .name = "smc91x-regs",
288 .start = 0x0c000c00,
289 .end = 0x0c0fffff,
290 .flags = IORESOURCE_MEM,
291 },
292 [1] = {
293 .start = LUBBOCK_ETH_IRQ,
294 .end = LUBBOCK_ETH_IRQ,
295 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
296 },
297 [2] = {
298 .name = "smc91x-attrib",
299 .start = 0x0e000000,
300 .end = 0x0e0fffff,
301 .flags = IORESOURCE_MEM,
302 },
303 };
304
305 static struct smc91x_platdata lubbock_smc91x_info = {
306 .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
307 };
308
309 static struct platform_device smc91x_device = {
310 .name = "smc91x",
311 .id = -1,
312 .num_resources = ARRAY_SIZE(smc91x_resources),
313 .resource = smc91x_resources,
314 .dev = {
315 .platform_data = &lubbock_smc91x_info,
316 },
317 };
318
319 static struct resource flash_resources[] = {
320 [0] = {
321 .start = 0x00000000,
322 .end = SZ_64M - 1,
323 .flags = IORESOURCE_MEM,
324 },
325 [1] = {
326 .start = 0x04000000,
327 .end = 0x04000000 + SZ_64M - 1,
328 .flags = IORESOURCE_MEM,
329 },
330 };
331
332 static struct mtd_partition lubbock_partitions[] = {
333 {
334 .name = "Bootloader",
335 .size = 0x00040000,
336 .offset = 0,
337 .mask_flags = MTD_WRITEABLE /* force read-only */
338 },{
339 .name = "Kernel",
340 .size = 0x00100000,
341 .offset = 0x00040000,
342 },{
343 .name = "Filesystem",
344 .size = MTDPART_SIZ_FULL,
345 .offset = 0x00140000
346 }
347 };
348
349 static struct flash_platform_data lubbock_flash_data[2] = {
350 {
351 .map_name = "cfi_probe",
352 .parts = lubbock_partitions,
353 .nr_parts = ARRAY_SIZE(lubbock_partitions),
354 }, {
355 .map_name = "cfi_probe",
356 .parts = NULL,
357 .nr_parts = 0,
358 }
359 };
360
361 static struct platform_device lubbock_flash_device[2] = {
362 {
363 .name = "pxa2xx-flash",
364 .id = 0,
365 .dev = {
366 .platform_data = &lubbock_flash_data[0],
367 },
368 .resource = &flash_resources[0],
369 .num_resources = 1,
370 },
371 {
372 .name = "pxa2xx-flash",
373 .id = 1,
374 .dev = {
375 .platform_data = &lubbock_flash_data[1],
376 },
377 .resource = &flash_resources[1],
378 .num_resources = 1,
379 },
380 };
381
382 static struct platform_device *devices[] __initdata = {
383 &sa1111_device,
384 &smc91x_device,
385 &lubbock_flash_device[0],
386 &lubbock_flash_device[1],
387 };
388
389 static struct pxafb_mode_info sharp_lm8v31_mode = {
390 .pixclock = 270000,
391 .xres = 640,
392 .yres = 480,
393 .bpp = 16,
394 .hsync_len = 1,
395 .left_margin = 3,
396 .right_margin = 3,
397 .vsync_len = 1,
398 .upper_margin = 0,
399 .lower_margin = 0,
400 .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
401 .cmap_greyscale = 0,
402 };
403
404 static struct pxafb_mach_info sharp_lm8v31 = {
405 .modes = &sharp_lm8v31_mode,
406 .num_modes = 1,
407 .cmap_inverse = 0,
408 .cmap_static = 0,
409 .lcd_conn = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
410 LCD_AC_BIAS_FREQ(255),
411 };
412
413 #define MMC_POLL_RATE msecs_to_jiffies(1000)
414
415 static void lubbock_mmc_poll(unsigned long);
416 static irq_handler_t mmc_detect_int;
417
418 static struct timer_list mmc_timer = {
419 .function = lubbock_mmc_poll,
420 };
421
422 static void lubbock_mmc_poll(unsigned long data)
423 {
424 unsigned long flags;
425
426 /* clear any previous irq state, then ... */
427 local_irq_save(flags);
428 LUB_IRQ_SET_CLR &= ~(1 << 0);
429 local_irq_restore(flags);
430
431 /* poll until mmc/sd card is removed */
432 if (LUB_IRQ_SET_CLR & (1 << 0))
433 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
434 else {
435 (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data);
436 enable_irq(LUBBOCK_SD_IRQ);
437 }
438 }
439
440 static irqreturn_t lubbock_detect_int(int irq, void *data)
441 {
442 /* IRQ is level triggered; disable, and poll for removal */
443 disable_irq(irq);
444 mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE);
445
446 return mmc_detect_int(irq, data);
447 }
448
449 static int lubbock_mci_init(struct device *dev,
450 irq_handler_t detect_int,
451 void *data)
452 {
453 /* detect card insert/eject */
454 mmc_detect_int = detect_int;
455 init_timer(&mmc_timer);
456 mmc_timer.data = (unsigned long) data;
457 return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int,
458 IRQF_SAMPLE_RANDOM, "lubbock-sd-detect", data);
459 }
460
461 static int lubbock_mci_get_ro(struct device *dev)
462 {
463 return (LUB_MISC_RD & (1 << 2)) != 0;
464 }
465
466 static void lubbock_mci_exit(struct device *dev, void *data)
467 {
468 free_irq(LUBBOCK_SD_IRQ, data);
469 del_timer_sync(&mmc_timer);
470 }
471
472 static struct pxamci_platform_data lubbock_mci_platform_data = {
473 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
474 .detect_delay = 1,
475 .init = lubbock_mci_init,
476 .get_ro = lubbock_mci_get_ro,
477 .exit = lubbock_mci_exit,
478 .gpio_card_detect = -1,
479 .gpio_card_ro = -1,
480 .gpio_power = -1,
481 };
482
483 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
484 {
485 unsigned long flags;
486
487 local_irq_save(flags);
488 if (mode & IR_SIRMODE) {
489 LUB_MISC_WR &= ~(1 << 4);
490 } else if (mode & IR_FIRMODE) {
491 LUB_MISC_WR |= 1 << 4;
492 }
493 pxa2xx_transceiver_mode(dev, mode);
494 local_irq_restore(flags);
495 }
496
497 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
498 .gpio_pwdown = -1,
499 .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
500 .transceiver_mode = lubbock_irda_transceiver_mode,
501 };
502
503 static void __init lubbock_init(void)
504 {
505 int flashboot = (LUB_CONF_SWITCHES & 1);
506
507 pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
508
509 pxa_set_ffuart_info(NULL);
510 pxa_set_btuart_info(NULL);
511 pxa_set_stuart_info(NULL);
512
513 clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
514 pxa_set_udc_info(&udc_info);
515 set_pxa_fb_info(&sharp_lm8v31);
516 pxa_set_mci_info(&lubbock_mci_platform_data);
517 pxa_set_ficp_info(&lubbock_ficp_platform_data);
518 pxa_set_ac97_info(NULL);
519
520 lubbock_flash_data[0].width = lubbock_flash_data[1].width =
521 (BOOT_DEF & 1) ? 2 : 4;
522 /* Compensate for the nROMBT switch which swaps the flash banks */
523 printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
524 flashboot?"Flash":"ROM", flashboot);
525
526 lubbock_flash_data[flashboot^1].name = "application-flash";
527 lubbock_flash_data[flashboot].name = "boot-rom";
528 (void) platform_add_devices(devices, ARRAY_SIZE(devices));
529
530 pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
531 spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
532 }
533
534 static struct map_desc lubbock_io_desc[] __initdata = {
535 { /* CPLD */
536 .virtual = LUBBOCK_FPGA_VIRT,
537 .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
538 .length = 0x00100000,
539 .type = MT_DEVICE
540 }
541 };
542
543 static void __init lubbock_map_io(void)
544 {
545 pxa_map_io();
546 iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
547
548 PCFR |= PCFR_OPDE;
549 }
550
551 MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
552 /* Maintainer: MontaVista Software Inc. */
553 .phys_io = 0x40000000,
554 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
555 .map_io = lubbock_map_io,
556 .init_irq = lubbock_init_irq,
557 .timer = &pxa_timer,
558 .init_machine = lubbock_init,
559 MACHINE_END