arch/arm/mach-orion5x/dns323-setup.c

   1 /*
   2  * arch/arm/mach-orion5x/dns323-setup.c
   3  *
   4  * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
   5  *
   6  * Support for HW Rev C1:
   7  *
   8  * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU Lesser General Public License as
  12  * published by the Free Software Foundation; either version 2 of the
  13  * License, or (at your option) any later version.
  14  *
  15  */
  16 #include <linux/gpio.h>
  17 #include <linux/kernel.h>
  18 #include <linux/init.h>
  19 #include <linux/delay.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/pci.h>
  22 #include <linux/irq.h>
  23 #include <linux/mtd/physmap.h>
  24 #include <linux/mv643xx_eth.h>
  25 #include <linux/leds.h>
  26 #include <linux/gpio_keys.h>
  27 #include <linux/input.h>
  28 #include <linux/i2c.h>
  29 #include <linux/ata_platform.h>
  30 #include <linux/phy.h>
  31 #include <linux/marvell_phy.h>
  32 #include <asm/mach-types.h>
  33 #include <asm/mach/arch.h>
  34 #include <asm/mach/pci.h>
  35 #include <asm/system_info.h>
  36 #include <mach/orion5x.h>
  37 #include <plat/orion-gpio.h>
  38 #include "common.h"
  39 #include "mpp.h"
  40
  41 /* Rev A1 and B1 */
  42 #define DNS323_GPIO_LED_RIGHT_AMBER     1
  43 #define DNS323_GPIO_LED_LEFT_AMBER      2
  44 #define DNS323_GPIO_SYSTEM_UP           3
  45 #define DNS323_GPIO_LED_POWER1          4
  46 #define DNS323_GPIO_LED_POWER2          5
  47 #define DNS323_GPIO_OVERTEMP            6
  48 #define DNS323_GPIO_RTC                 7
  49 #define DNS323_GPIO_POWER_OFF           8
  50 #define DNS323_GPIO_KEY_POWER           9
  51 #define DNS323_GPIO_KEY_RESET           10
  52
  53 /* Rev C1 */
  54 #define DNS323C_GPIO_KEY_POWER          1
  55 #define DNS323C_GPIO_POWER_OFF          2
  56 #define DNS323C_GPIO_LED_RIGHT_AMBER    8
  57 #define DNS323C_GPIO_LED_LEFT_AMBER     9
  58 #define DNS323C_GPIO_LED_POWER          17
  59 #define DNS323C_GPIO_FAN_BIT1           18
  60 #define DNS323C_GPIO_FAN_BIT0           19
  61
  62 /* Exposed to userspace, do not change */
  63 enum {
  64         DNS323_REV_A1,  /* 0 */
  65         DNS323_REV_B1,  /* 1 */
  66         DNS323_REV_C1,  /* 2 */
  67 };
  68
  69
  70 /****************************************************************************
  71  * PCI setup
  72  */
  73
  74 static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
  75 {
  76         int irq;
  77
  78         /*
  79          * Check for devices with hard-wired IRQs.
  80          */
  81         irq = orion5x_pci_map_irq(dev, slot, pin);
  82         if (irq != -1)
  83                 return irq;
  84
  85         return -1;
  86 }
  87
  88 static struct hw_pci dns323_pci __initdata = {
  89         .nr_controllers = 2,
  90         .setup          = orion5x_pci_sys_setup,
  91         .scan           = orion5x_pci_sys_scan_bus,
  92         .map_irq        = dns323_pci_map_irq,
  93 };
  94
  95 static int __init dns323_pci_init(void)
  96 {
  97         /* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI
  98          * gets in the way of initialising the SATA controller.
  99          */
 100         if (machine_is_dns323() && system_rev == DNS323_REV_A1)
 101                 pci_common_init(&dns323_pci);
 102
 103         return 0;
 104 }
 105
 106 subsys_initcall(dns323_pci_init);
 107
 108 /****************************************************************************
 109  * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
 110  *
 111  * Layout as used by D-Link:
 112  *  0x00000000-0x00010000 : "MTD1"
 113  *  0x00010000-0x00020000 : "MTD2"
 114  *  0x00020000-0x001a0000 : "Linux Kernel"
 115  *  0x001a0000-0x007d0000 : "File System"
 116  *  0x007d0000-0x00800000 : "u-boot"
 117  */
 118
 119 #define DNS323_NOR_BOOT_BASE 0xf4000000
 120 #define DNS323_NOR_BOOT_SIZE SZ_8M
 121
 122 static struct mtd_partition dns323_partitions[] = {
 123         {
 124                 .name   = "MTD1",
 125                 .size   = 0x00010000,
 126                 .offset = 0,
 127         }, {
 128                 .name   = "MTD2",
 129                 .size   = 0x00010000,
 130                 .offset = 0x00010000,
 131         }, {
 132                 .name   = "Linux Kernel",
 133                 .size   = 0x00180000,
 134                 .offset = 0x00020000,
 135         }, {
 136                 .name   = "File System",
 137                 .size   = 0x00630000,
 138                 .offset = 0x001A0000,
 139         }, {
 140                 .name   = "u-boot",
 141                 .size   = 0x00030000,
 142                 .offset = 0x007d0000,
 143         },
 144 };
 145
 146 static struct physmap_flash_data dns323_nor_flash_data = {
 147         .width          = 1,
 148         .parts          = dns323_partitions,
 149         .nr_parts       = ARRAY_SIZE(dns323_partitions)
 150 };
 151
 152 static struct resource dns323_nor_flash_resource = {
 153         .flags          = IORESOURCE_MEM,
 154         .start          = DNS323_NOR_BOOT_BASE,
 155         .end            = DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1,
 156 };
 157
 158 static struct platform_device dns323_nor_flash = {
 159         .name           = "physmap-flash",
 160         .id             = 0,
 161         .dev            = {
 162                 .platform_data  = &dns323_nor_flash_data,
 163         },
 164         .resource       = &dns323_nor_flash_resource,
 165         .num_resources  = 1,
 166 };
 167
 168 /****************************************************************************
 169  * Ethernet
 170  */
 171
 172 static struct mv643xx_eth_platform_data dns323_eth_data = {
 173         .phy_addr = MV643XX_ETH_PHY_ADDR(8),
 174 };
 175
 176 /* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
 177  * functions be kept somewhere?
 178  */
 179 static int __init dns323_parse_hex_nibble(char n)
 180 {
 181         if (n >= '0' && n <= '9')
 182                 return n - '0';
 183
 184         if (n >= 'A' && n <= 'F')
 185                 return n - 'A' + 10;
 186
 187         if (n >= 'a' && n <= 'f')
 188                 return n - 'a' + 10;
 189
 190         return -1;
 191 }
 192
 193 static int __init dns323_parse_hex_byte(const char *b)
 194 {
 195         int hi;
 196         int lo;
 197
 198         hi = dns323_parse_hex_nibble(b[0]);
 199         lo = dns323_parse_hex_nibble(b[1]);
 200
 201         if (hi < 0 || lo < 0)
 202                 return -1;
 203
 204         return (hi << 4) | lo;
 205 }
 206
 207 static int __init dns323_read_mac_addr(void)
 208 {
 209         u_int8_t addr[6];
 210         int i;
 211         char *mac_page;
 212
 213         /* MAC address is stored as a regular ol' string in /dev/mtdblock4
 214          * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
 215          */
 216         mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
 217         if (!mac_page)
 218                 return -ENOMEM;
 219
 220         /* Sanity check the string we're looking at */
 221         for (i = 0; i < 5; i++) {
 222                 if (*(mac_page + (i * 3) + 2) != ':') {
 223                         goto error_fail;
 224                 }
 225         }
 226
 227         for (i = 0; i < 6; i++) {
 228                 int byte;
 229
 230                 byte = dns323_parse_hex_byte(mac_page + (i * 3));
 231                 if (byte < 0) {
 232                         goto error_fail;
 233                 }
 234
 235                 addr[i] = byte;
 236         }
 237
 238         iounmap(mac_page);
 239         printk("DNS-323: Found ethernet MAC address: ");
 240         for (i = 0; i < 6; i++)
 241                 printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
 242
 243         memcpy(dns323_eth_data.mac_addr, addr, 6);
 244
 245         return 0;
 246
 247 error_fail:
 248         iounmap(mac_page);
 249         return -EINVAL;
 250 }
 251
 252 /****************************************************************************
 253  * GPIO LEDs (simple - doesn't use hardware blinking support)
 254  */
 255
 256 static struct gpio_led dns323ab_leds[] = {
 257         {
 258                 .name = "power:blue",
 259                 .gpio = DNS323_GPIO_LED_POWER2,
 260                 .default_trigger = "default-on",
 261         }, {
 262                 .name = "right:amber",
 263                 .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
 264                 .active_low = 1,
 265         }, {
 266                 .name = "left:amber",
 267                 .gpio = DNS323_GPIO_LED_LEFT_AMBER,
 268                 .active_low = 1,
 269         },
 270 };
 271
 272
 273 static struct gpio_led dns323c_leds[] = {
 274         {
 275                 .name = "power:blue",
 276                 .gpio = DNS323C_GPIO_LED_POWER,
 277                 .default_trigger = "timer",
 278                 .active_low = 1,
 279         }, {
 280                 .name = "right:amber",
 281                 .gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
 282                 .active_low = 1,
 283         }, {
 284                 .name = "left:amber",
 285                 .gpio = DNS323C_GPIO_LED_LEFT_AMBER,
 286                 .active_low = 1,
 287         },
 288 };
 289
 290
 291 static struct gpio_led_platform_data dns323ab_led_data = {
 292         .num_leds       = ARRAY_SIZE(dns323ab_leds),
 293         .leds           = dns323ab_leds,
 294         .gpio_blink_set = orion_gpio_led_blink_set,
 295 };
 296
 297 static struct gpio_led_platform_data dns323c_led_data = {
 298         .num_leds       = ARRAY_SIZE(dns323c_leds),
 299         .leds           = dns323c_leds,
 300         .gpio_blink_set = orion_gpio_led_blink_set,
 301 };
 302
 303 static struct platform_device dns323_gpio_leds = {
 304         .name           = "leds-gpio",
 305         .id             = -1,
 306         .dev            = {
 307                 .platform_data  = &dns323ab_led_data,
 308         },
 309 };
 310
 311 /****************************************************************************
 312  * GPIO Attached Keys
 313  */
 314
 315 static struct gpio_keys_button dns323ab_buttons[] = {
 316         {
 317                 .code           = KEY_RESTART,
 318                 .gpio           = DNS323_GPIO_KEY_RESET,
 319                 .desc           = "Reset Button",
 320                 .active_low     = 1,
 321         }, {
 322                 .code           = KEY_POWER,
 323                 .gpio           = DNS323_GPIO_KEY_POWER,
 324                 .desc           = "Power Button",
 325                 .active_low     = 1,
 326         },
 327 };
 328
 329 static struct gpio_keys_platform_data dns323ab_button_data = {
 330         .buttons        = dns323ab_buttons,
 331         .nbuttons       = ARRAY_SIZE(dns323ab_buttons),
 332 };
 333
 334 static struct gpio_keys_button dns323c_buttons[] = {
 335         {
 336                 .code           = KEY_POWER,
 337                 .gpio           = DNS323C_GPIO_KEY_POWER,
 338                 .desc           = "Power Button",
 339                 .active_low     = 1,
 340         },
 341 };
 342
 343 static struct gpio_keys_platform_data dns323c_button_data = {
 344         .buttons        = dns323c_buttons,
 345         .nbuttons       = ARRAY_SIZE(dns323c_buttons),
 346 };
 347
 348 static struct platform_device dns323_button_device = {
 349         .name           = "gpio-keys",
 350         .id             = -1,
 351         .num_resources  = 0,
 352         .dev            = {
 353                 .platform_data  = &dns323ab_button_data,
 354         },
 355 };
 356
 357 /*****************************************************************************
 358  * SATA
 359  */
 360 static struct mv_sata_platform_data dns323_sata_data = {
 361        .n_ports        = 2,
 362 };
 363
 364 /****************************************************************************
 365  * General Setup
 366  */
 367 static unsigned int dns323a_mpp_modes[] __initdata = {
 368         MPP0_PCIE_RST_OUTn,
 369         MPP1_GPIO,              /* right amber LED (sata ch0) */
 370         MPP2_GPIO,              /* left amber LED (sata ch1) */
 371         MPP3_UNUSED,
 372         MPP4_GPIO,              /* power button LED */
 373         MPP5_GPIO,              /* power button LED */
 374         MPP6_GPIO,              /* GMT G751-2f overtemp */
 375         MPP7_GPIO,              /* M41T80 nIRQ/OUT/SQW */
 376         MPP8_GPIO,              /* triggers power off */
 377         MPP9_GPIO,              /* power button switch */
 378         MPP10_GPIO,             /* reset button switch */
 379         MPP11_UNUSED,
 380         MPP12_UNUSED,
 381         MPP13_UNUSED,
 382         MPP14_UNUSED,
 383         MPP15_UNUSED,
 384         MPP16_UNUSED,
 385         MPP17_UNUSED,
 386         MPP18_UNUSED,
 387         MPP19_UNUSED,
 388         0,
 389 };
 390
 391 static unsigned int dns323b_mpp_modes[] __initdata = {
 392         MPP0_UNUSED,
 393         MPP1_GPIO,              /* right amber LED (sata ch0) */
 394         MPP2_GPIO,              /* left amber LED (sata ch1) */
 395         MPP3_GPIO,              /* system up flag */
 396         MPP4_GPIO,              /* power button LED */
 397         MPP5_GPIO,              /* power button LED */
 398         MPP6_GPIO,              /* GMT G751-2f overtemp */
 399         MPP7_GPIO,              /* M41T80 nIRQ/OUT/SQW */
 400         MPP8_GPIO,              /* triggers power off */
 401         MPP9_GPIO,              /* power button switch */
 402         MPP10_GPIO,             /* reset button switch */
 403         MPP11_UNUSED,
 404         MPP12_SATA_LED,
 405         MPP13_SATA_LED,
 406         MPP14_SATA_LED,
 407         MPP15_SATA_LED,
 408         MPP16_UNUSED,
 409         MPP17_UNUSED,
 410         MPP18_UNUSED,
 411         MPP19_UNUSED,
 412         0,
 413 };
 414
 415 static unsigned int dns323c_mpp_modes[] __initdata = {
 416         MPP0_GPIO,              /* ? input */
 417         MPP1_GPIO,              /* input power switch (0 = pressed) */
 418         MPP2_GPIO,              /* output power off */
 419         MPP3_UNUSED,            /* ? output */
 420         MPP4_UNUSED,            /* ? output */
 421         MPP5_UNUSED,            /* ? output */
 422         MPP6_UNUSED,            /* ? output */
 423         MPP7_UNUSED,            /* ? output */
 424         MPP8_GPIO,              /* i/o right amber LED */
 425         MPP9_GPIO,              /* i/o left amber LED */
 426         MPP10_GPIO,             /* input */
 427         MPP11_UNUSED,
 428         MPP12_SATA_LED,
 429         MPP13_SATA_LED,
 430         MPP14_SATA_LED,
 431         MPP15_SATA_LED,
 432         MPP16_UNUSED,
 433         MPP17_GPIO,             /* power button LED */
 434         MPP18_GPIO,             /* fan speed bit 0 */
 435         MPP19_GPIO,             /* fan speed bit 1 */
 436         0,
 437 };
 438
 439 /* Rev C1 Fan speed notes:
 440  *
 441  * The fan is controlled by 2 GPIOs on this board. The settings
 442  * of the bits is as follow:
 443  *
 444  *  GPIO 18    GPIO 19    Fan
 445  *
 446  *    0          0        stopped
 447  *    0          1        low speed
 448  *    1          0        high speed
 449  *    1          1        don't do that (*)
 450  *
 451  * (*) I think the two bits control two feed-in resistors into a fixed
 452  *     PWN circuit, setting both bits will basically go a 'bit' faster
 453  *     than high speed, but d-link doesn't do it and you may get out of
 454  *     HW spec so don't do it.
 455  */
 456
 457 /*
 458  * On the DNS-323 A1 and B1 the following devices are attached via I2C:
 459  *
 460  *  i2c addr | chip        | description
 461  *  0x3e     | GMT G760Af  | fan speed PWM controller
 462  *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
 463  *  0x68     | ST M41T80   | RTC w/ alarm
 464  */
 465 static struct i2c_board_info __initdata dns323ab_i2c_devices[] = {
 466         {
 467                 I2C_BOARD_INFO("g760a", 0x3e),
 468         }, {
 469                 I2C_BOARD_INFO("lm75", 0x48),
 470         }, {
 471                 I2C_BOARD_INFO("m41t80", 0x68),
 472         },
 473 };
 474
 475 /*
 476  * On the DNS-323 C1 the following devices are attached via I2C:
 477  *
 478  *  i2c addr | chip        | description
 479  *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
 480  *  0x68     | ST M41T80   | RTC w/ alarm
 481  */
 482 static struct i2c_board_info __initdata dns323c_i2c_devices[] = {
 483         {
 484                 I2C_BOARD_INFO("lm75", 0x48),
 485         }, {
 486                 I2C_BOARD_INFO("m41t80", 0x68),
 487         },
 488 };
 489
 490 /* DNS-323 rev. A specific power off method */
 491 static void dns323a_power_off(void)
 492 {
 493         pr_info("DNS-323: Triggering power-off...\n");
 494         gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 495 }
 496
 497 /* DNS-323 rev B specific power off method */
 498 static void dns323b_power_off(void)
 499 {
 500         pr_info("DNS-323: Triggering power-off...\n");
 501         /* Pin has to be changed to 1 and back to 0 to do actual power off. */
 502         gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 503         mdelay(100);
 504         gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
 505 }
 506
 507 /* DNS-323 rev. C specific power off method */
 508 static void dns323c_power_off(void)
 509 {
 510         pr_info("DNS-323: Triggering power-off...\n");
 511         gpio_set_value(DNS323C_GPIO_POWER_OFF, 1);
 512 }
 513
 514 static int dns323c_phy_fixup(struct phy_device *phy)
 515 {
 516         phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS;
 517
 518         return 0;
 519 }
 520
 521 static int __init dns323_identify_rev(void)
 522 {
 523         u32 dev, rev, i, reg;
 524
 525         pr_debug("DNS-323: Identifying board ... \n");
 526
 527         /* Rev A1 has a 5181 */
 528         orion5x_pcie_id(&dev, &rev);
 529         if (dev == MV88F5181_DEV_ID) {
 530                 pr_debug("DNS-323: 5181 found, board is A1\n");
 531                 return DNS323_REV_A1;
 532         }
 533         pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n");
 534
 535         /* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is
 536          * a bit gross but we want to do that without links into the eth
 537          * driver so let's poke at it directly. We default to rev B1 in
 538          * case the accesses fail
 539          */
 540
 541 #define ETH_SMI_REG             (ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004)
 542 #define  SMI_BUSY               0x10000000
 543 #define  SMI_READ_VALID         0x08000000
 544 #define  SMI_OPCODE_READ        0x04000000
 545 #define  SMI_OPCODE_WRITE       0x00000000
 546
 547         for (i = 0; i < 1000; i++) {
 548                 reg = readl(ETH_SMI_REG);
 549                 if (!(reg & SMI_BUSY))
 550                         break;
 551         }
 552         if (i >= 1000) {
 553                 pr_warning("DNS-323: Timeout accessing PHY, assuming rev B1\n");
 554                 return DNS323_REV_B1;
 555         }
 556         writel((3 << 21)        /* phy ID reg */ |
 557                (8 << 16)        /* phy addr */ |
 558                SMI_OPCODE_READ, ETH_SMI_REG);
 559         for (i = 0; i < 1000; i++) {
 560                 reg = readl(ETH_SMI_REG);
 561                 if (reg & SMI_READ_VALID)
 562                         break;
 563         }
 564         if (i >= 1000) {
 565                 pr_warning("DNS-323: Timeout reading PHY, assuming rev B1\n");
 566                 return DNS323_REV_B1;
 567         }
 568         pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
 569
 570         /* Note: the Marvell tools mask the ID with 0x3f0 before comparison
 571          * but I don't see that making a difference here, at least with
 572          * any known Marvell PHY ID
 573          */
 574         switch(reg & 0xfff0) {
 575         case 0x0cc0: /* MV88E1111 */
 576                 return DNS323_REV_B1;
 577         case 0x0e10: /* MV88E1118 */
 578                 return DNS323_REV_C1;
 579         default:
 580                 pr_warning("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
 581                            reg & 0xffff);
 582         }
 583         return DNS323_REV_B1;
 584 }
 585
 586 static void __init dns323_init(void)
 587 {
 588         /* Setup basic Orion functions. Need to be called early. */
 589         orion5x_init();
 590
 591         /* Identify revision */
 592         system_rev = dns323_identify_rev();
 593         pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev);
 594
 595         /* Just to be tricky, the 5182 has a completely different
 596          * set of MPP modes to the 5181.
 597          */
 598         switch(system_rev) {
 599         case DNS323_REV_A1:
 600                 orion5x_mpp_conf(dns323a_mpp_modes);
 601                 writel(0, MPP_DEV_CTRL);                /* DEV_D[31:16] */
 602                 break;
 603         case DNS323_REV_B1:
 604                 orion5x_mpp_conf(dns323b_mpp_modes);
 605                 break;
 606         case DNS323_REV_C1:
 607                 orion5x_mpp_conf(dns323c_mpp_modes);
 608                 break;
 609         }
 610
 611         /* setup flash mapping
 612          * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 613          */
 614         orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 615         platform_device_register(&dns323_nor_flash);
 616
 617         /* Sort out LEDs, Buttons and i2c devices */
 618         switch(system_rev) {
 619         case DNS323_REV_A1:
 620                 /* The 5181 power LED is active low and requires
 621                  * DNS323_GPIO_LED_POWER1 to also be low.
 622                  */
 623                  dns323ab_leds[0].active_low = 1;
 624                  gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
 625                  gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
 626                 /* Fall through */
 627         case DNS323_REV_B1:
 628                 i2c_register_board_info(0, dns323ab_i2c_devices,
 629                                 ARRAY_SIZE(dns323ab_i2c_devices));
 630                 break;
 631         case DNS323_REV_C1:
 632                 /* Hookup LEDs & Buttons */
 633                 dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
 634                 dns323_button_device.dev.platform_data = &dns323c_button_data;
 635
 636                 /* Hookup i2c devices and fan driver */
 637                 i2c_register_board_info(0, dns323c_i2c_devices,
 638                                 ARRAY_SIZE(dns323c_i2c_devices));
 639                 platform_device_register_simple("dns323c-fan", 0, NULL, 0);
 640
 641                 /* Register fixup for the PHY LEDs */
 642                 phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
 643                                            MARVELL_PHY_ID_MASK,
 644                                            dns323c_phy_fixup);
 645         }
 646
 647         platform_device_register(&dns323_gpio_leds);
 648         platform_device_register(&dns323_button_device);
 649
 650         /*
 651          * Configure peripherals.
 652          */
 653         if (dns323_read_mac_addr() < 0)
 654                 printk("DNS-323: Failed to read MAC address\n");
 655         orion5x_ehci0_init();
 656         orion5x_eth_init(&dns323_eth_data);
 657         orion5x_i2c_init();
 658         orion5x_uart0_init();
 659
 660         /* Remaining GPIOs */
 661         switch(system_rev) {
 662         case DNS323_REV_A1:
 663                 /* Poweroff GPIO */
 664                 if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 665                     gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 666                         pr_err("DNS-323: failed to setup power-off GPIO\n");
 667                 pm_power_off = dns323a_power_off;
 668                 break;
 669         case DNS323_REV_B1:
 670                 /* 5182 built-in SATA init */
 671                 orion5x_sata_init(&dns323_sata_data);
 672
 673                 /* The DNS323 rev B1 has flag to indicate the system is up.
 674                  * Without this flag set, power LED will flash and cannot be
 675                  * controlled via leds-gpio.
 676                  */
 677                 if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0)
 678                         gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1);
 679
 680                 /* Poweroff GPIO */
 681                 if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 682                     gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 683                         pr_err("DNS-323: failed to setup power-off GPIO\n");
 684                 pm_power_off = dns323b_power_off;
 685                 break;
 686         case DNS323_REV_C1:
 687                 /* 5182 built-in SATA init */
 688                 orion5x_sata_init(&dns323_sata_data);
 689
 690                 /* Poweroff GPIO */
 691                 if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 692                     gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
 693                         pr_err("DNS-323: failed to setup power-off GPIO\n");
 694                 pm_power_off = dns323c_power_off;
 695
 696                 /* Now, -this- should theorically be done by the sata_mv driver
 697                  * once I figure out what's going on there. Maybe the behaviour
 698                  * of the LEDs should be somewhat passed via the platform_data.
 699                  * for now, just whack the register and make the LEDs happy
 700                  *
 701                  * Note: AFAIK, rev B1 needs the same treatement but I'll let
 702                  * somebody else test it.
 703                  */
 704                 writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
 705                 break;
 706         }
 707 }
 708
 709 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
 710 MACHINE_START(DNS323, "D-Link DNS-323")
 711         /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 712         .atag_offset    = 0x100,
 713         .init_machine   = dns323_init,
 714         .map_io         = orion5x_map_io,
 715         .init_early     = orion5x_init_early,
 716         .init_irq       = orion5x_init_irq,
 717         .init_time      = orion5x_timer_init,
 718         .fixup          = tag_fixup_mem32,
 719         .restart        = orion5x_restart,
 720 MACHINE_END