arch/arm/mach-omap2/prm2xxx_3xxx.c

   1 /*
   2  * OMAP2/3 PRM module functions
   3  *
   4  * Copyright (C) 2010 Texas Instruments, Inc.
   5  * Copyright (C) 2010 Nokia Corporation
   6  * Benoît Cousson
   7  * Paul Walmsley
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/errno.h>
  16 #include <linux/err.h>
  17 #include <linux/io.h>
  18
  19 #include <plat/common.h>
  20 #include <plat/cpu.h>
  21 #include <plat/prcm.h>
  22
  23 #include "prm2xxx_3xxx.h"
  24 #include "cm2xxx_3xxx.h"
  25 #include "prm-regbits-24xx.h"
  26 #include "prm-regbits-34xx.h"
  27
  28 u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
  29 {
  30         return __raw_readl(prm_base + module + idx);
  31 }
  32
  33 void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
  34 {
  35         __raw_writel(val, prm_base + module + idx);
  36 }
  37
  38 /* Read-modify-write a register in a PRM module. Caller must lock */
  39 u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
  40 {
  41         u32 v;
  42
  43         v = omap2_prm_read_mod_reg(module, idx);
  44         v &= ~mask;
  45         v |= bits;
  46         omap2_prm_write_mod_reg(v, module, idx);
  47
  48         return v;
  49 }
  50
  51 /* Read a PRM register, AND it, and shift the result down to bit 0 */
  52 u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
  53 {
  54         u32 v;
  55
  56         v = omap2_prm_read_mod_reg(domain, idx);
  57         v &= mask;
  58         v >>= __ffs(mask);
  59
  60         return v;
  61 }
  62
  63 u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
  64 {
  65         return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
  66 }
  67
  68 u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
  69 {
  70         return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
  71 }
  72
  73
  74 /**
  75  * omap2_prm_is_hardreset_asserted - read the HW reset line state of
  76  * submodules contained in the hwmod module
  77  * @prm_mod: PRM submodule base (e.g. CORE_MOD)
  78  * @shift: register bit shift corresponding to the reset line to check
  79  *
  80  * Returns 1 if the (sub)module hardreset line is currently asserted,
  81  * 0 if the (sub)module hardreset line is not currently asserted, or
  82  * -EINVAL if called while running on a non-OMAP2/3 chip.
  83  */
  84 int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
  85 {
  86         if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
  87                 return -EINVAL;
  88
  89         return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
  90                                        (1 << shift));
  91 }
  92
  93 /**
  94  * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
  95  * @prm_mod: PRM submodule base (e.g. CORE_MOD)
  96  * @shift: register bit shift corresponding to the reset line to assert
  97  *
  98  * Some IPs like dsp or iva contain processors that require an HW
  99  * reset line to be asserted / deasserted in order to fully enable the
 100  * IP.  These modules may have multiple hard-reset lines that reset
 101  * different 'submodules' inside the IP block.  This function will
 102  * place the submodule into reset.  Returns 0 upon success or -EINVAL
 103  * upon an argument error.
 104  */
 105 int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
 106 {
 107         u32 mask;
 108
 109         if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
 110                 return -EINVAL;
 111
 112         mask = 1 << shift;
 113         omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
 114
 115         return 0;
 116 }
 117
 118 /**
 119  * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
 120  * @prm_mod: PRM submodule base (e.g. CORE_MOD)
 121  * @shift: register bit shift corresponding to the reset line to deassert
 122  *
 123  * Some IPs like dsp or iva contain processors that require an HW
 124  * reset line to be asserted / deasserted in order to fully enable the
 125  * IP.  These modules may have multiple hard-reset lines that reset
 126  * different 'submodules' inside the IP block.  This function will
 127  * take the submodule out of reset and wait until the PRCM indicates
 128  * that the reset has completed before returning.  Returns 0 upon success or
 129  * -EINVAL upon an argument error, -EEXIST if the submodule was already out
 130  * of reset, or -EBUSY if the submodule did not exit reset promptly.
 131  */
 132 int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
 133 {
 134         u32 mask;
 135         int c;
 136
 137         if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
 138                 return -EINVAL;
 139
 140         mask = 1 << shift;
 141
 142         /* Check the current status to avoid de-asserting the line twice */
 143         if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
 144                 return -EEXIST;
 145
 146         /* Clear the reset status by writing 1 to the status bit */
 147         omap2_prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
 148         /* de-assert the reset control line */
 149         omap2_prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
 150         /* wait the status to be set */
 151         omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
 152                                                   mask),
 153                           MAX_MODULE_HARDRESET_WAIT, c);
 154
 155         return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
 156 }