2 * linux/arch/arm/mach-omap1/board-voiceblue.c
4 * Modified from board-generic.c
6 * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
8 * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/platform_device.h>
17 #include <linux/interrupt.h>
18 #include <linux/irq.h>
19 #include <linux/init.h>
20 #include <linux/kernel.h>
21 #include <linux/mtd/physmap.h>
22 #include <linux/notifier.h>
23 #include <linux/reboot.h>
24 #include <linux/serial_8250.h>
25 #include <linux/serial_reg.h>
26 #include <linux/smc91x.h>
28 #include <mach/hardware.h>
29 #include <asm/mach-types.h>
30 #include <asm/mach/arch.h>
31 #include <asm/mach/map.h>
33 #include <plat/common.h>
34 #include <mach/gpio.h>
35 #include <plat/flash.h>
40 static struct plat_serial8250_port voiceblue_ports
[] = {
42 .mapbase
= (unsigned long)(OMAP_CS1_PHYS
+ 0x40000),
43 .irq
= OMAP_GPIO_IRQ(12),
44 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
50 .mapbase
= (unsigned long)(OMAP_CS1_PHYS
+ 0x50000),
51 .irq
= OMAP_GPIO_IRQ(13),
52 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
58 .mapbase
= (unsigned long)(OMAP_CS1_PHYS
+ 0x60000),
59 .irq
= OMAP_GPIO_IRQ(14),
60 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
66 .mapbase
= (unsigned long)(OMAP_CS1_PHYS
+ 0x70000),
67 .irq
= OMAP_GPIO_IRQ(15),
68 .flags
= UPF_BOOT_AUTOCONF
| UPF_IOREMAP
,
76 static struct platform_device serial_device
= {
78 .id
= PLAT8250_DEV_PLATFORM1
,
80 .platform_data
= voiceblue_ports
,
84 static int __init
ext_uart_init(void)
86 if (!machine_is_voiceblue())
89 return platform_device_register(&serial_device
);
91 arch_initcall(ext_uart_init
);
93 static struct physmap_flash_data voiceblue_flash_data
= {
95 .set_vpp
= omap1_set_vpp
,
98 static struct resource voiceblue_flash_resource
= {
99 .start
= OMAP_CS0_PHYS
,
100 .end
= OMAP_CS0_PHYS
+ SZ_32M
- 1,
101 .flags
= IORESOURCE_MEM
,
104 static struct platform_device voiceblue_flash_device
= {
105 .name
= "physmap-flash",
108 .platform_data
= &voiceblue_flash_data
,
111 .resource
= &voiceblue_flash_resource
,
114 static struct smc91x_platdata voiceblue_smc91x_info
= {
115 .flags
= SMC91X_USE_16BIT
| SMC91X_NOWAIT
,
116 .leda
= RPC_LED_100_10
,
117 .ledb
= RPC_LED_TX_RX
,
120 static struct resource voiceblue_smc91x_resources
[] = {
122 .start
= OMAP_CS2_PHYS
+ 0x300,
123 .end
= OMAP_CS2_PHYS
+ 0x300 + 16,
124 .flags
= IORESOURCE_MEM
,
127 .start
= OMAP_GPIO_IRQ(8),
128 .end
= OMAP_GPIO_IRQ(8),
129 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE
,
133 static struct platform_device voiceblue_smc91x_device
= {
137 .platform_data
= &voiceblue_smc91x_info
,
139 .num_resources
= ARRAY_SIZE(voiceblue_smc91x_resources
),
140 .resource
= voiceblue_smc91x_resources
,
143 static struct platform_device
*voiceblue_devices
[] __initdata
= {
144 &voiceblue_flash_device
,
145 &voiceblue_smc91x_device
,
148 static struct omap_usb_config voiceblue_usb_config __initdata
= {
157 static struct omap_board_config_kernel voiceblue_config
[] = {
160 static void __init
voiceblue_init_irq(void)
162 omap1_init_common_hw();
166 static void __init
voiceblue_init(void)
168 /* mux pins for uarts */
169 omap_cfg_reg(UART1_TX
);
170 omap_cfg_reg(UART1_RTS
);
171 omap_cfg_reg(UART2_TX
);
172 omap_cfg_reg(UART2_RTS
);
173 omap_cfg_reg(UART3_TX
);
174 omap_cfg_reg(UART3_RX
);
177 gpio_request(0, "Watchdog");
179 gpio_request(7, "SMC91x reset");
180 gpio_direction_output(7, 1);
181 udelay(2); /* wait at least 100ns */
182 gpio_set_value(7, 0);
183 mdelay(50); /* 50ms until PHY ready */
184 /* smc91x interrupt pin */
185 gpio_request(8, "SMC91x irq");
187 gpio_request(6, "16C554 reset");
188 gpio_direction_output(6, 0);
189 /* 16C554 interrupt pins */
190 gpio_request(12, "16C554 irq");
191 gpio_request(13, "16C554 irq");
192 gpio_request(14, "16C554 irq");
193 gpio_request(15, "16C554 irq");
194 set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING
);
195 set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING
);
196 set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING
);
197 set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING
);
199 platform_add_devices(voiceblue_devices
, ARRAY_SIZE(voiceblue_devices
));
200 omap_board_config
= voiceblue_config
;
201 omap_board_config_size
= ARRAY_SIZE(voiceblue_config
);
203 omap1_usb_init(&voiceblue_usb_config
);
204 omap_register_i2c_bus(1, 100, NULL
, 0);
206 /* There is a good chance board is going up, so enable power LED
207 * (it is connected through invertor) */
208 omap_writeb(0x00, OMAP_LPG1_LCR
);
209 omap_writeb(0x00, OMAP_LPG1_PMR
); /* Disable clock */
212 static void __init
voiceblue_map_io(void)
214 omap1_map_common_io();
217 #define MACHINE_PANICED 1
218 #define MACHINE_REBOOTING 2
219 #define MACHINE_REBOOT 4
220 static unsigned long machine_state
;
222 static int panic_event(struct notifier_block
*this, unsigned long event
,
225 if (test_and_set_bit(MACHINE_PANICED
, &machine_state
))
228 /* Flash power LED */
229 omap_writeb(0x78, OMAP_LPG1_LCR
);
230 omap_writeb(0x01, OMAP_LPG1_PMR
); /* Enable clock */
235 static struct notifier_block panic_block
= {
236 .notifier_call
= panic_event
,
239 static int __init
voiceblue_setup(void)
241 if (!machine_is_voiceblue())
244 /* Setup panic notifier */
245 atomic_notifier_chain_register(&panic_notifier_list
, &panic_block
);
249 postcore_initcall(voiceblue_setup
);
251 static int wdt_gpio_state
;
253 void voiceblue_wdt_enable(void)
255 gpio_direction_output(0, 0);
256 gpio_set_value(0, 1);
257 gpio_set_value(0, 0);
261 void voiceblue_wdt_disable(void)
263 gpio_set_value(0, 0);
264 gpio_set_value(0, 1);
265 gpio_set_value(0, 0);
266 gpio_direction_input(0);
269 void voiceblue_wdt_ping(void)
271 if (test_bit(MACHINE_REBOOT
, &machine_state
))
274 wdt_gpio_state
= !wdt_gpio_state
;
275 gpio_set_value(0, wdt_gpio_state
);
278 void voiceblue_reset(void)
280 set_bit(MACHINE_REBOOT
, &machine_state
);
281 voiceblue_wdt_enable();
285 EXPORT_SYMBOL(voiceblue_wdt_enable
);
286 EXPORT_SYMBOL(voiceblue_wdt_disable
);
287 EXPORT_SYMBOL(voiceblue_wdt_ping
);
289 MACHINE_START(VOICEBLUE
, "VoiceBlue OMAP5910")
290 /* Maintainer: Ladislav Michl <michl@2n.cz> */
291 .boot_params
= 0x10000100,
292 .map_io
= voiceblue_map_io
,
293 .reserve
= omap_reserve
,
294 .init_irq
= voiceblue_init_irq
,
295 .init_machine
= voiceblue_init
,
296 .timer
= &omap_timer
,