arch/arm/mach-imx/Kconfig

   1 menuconfig ARCH_MXC
   2         bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
   3         select ARCH_REQUIRE_GPIOLIB
   4         select ARM_CPU_SUSPEND if PM
   5         select CLKSRC_MMIO
   6         select GENERIC_IRQ_CHIP
   7         select PINCTRL
   8         select PM_OPP if PM
   9         select SOC_BUS
  10         select SRAM
  11         help
  12           Support for Freescale MXC/iMX-based family of processors
  13
  14 if ARCH_MXC
  15
  16 config MXC_TZIC
  17         bool
  18
  19 config MXC_AVIC
  20         bool
  21
  22 config MXC_DEBUG_BOARD
  23         bool "Enable MXC debug board(for 3-stack)"
  24         depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
  25         help
  26           The debug board is an integral part of the MXC 3-stack(PDK)
  27           platforms, it can be attached or removed from the peripheral
  28           board. On debug board, several debug devices(ethernet, UART,
  29           buttons, LEDs and JTAG) are implemented. Between the MCU and
  30           these devices, a CPLD is added as a bridge which performs
  31           data/address de-multiplexing and decode, signal level shift,
  32           interrupt control and various board functions.
  33
  34 config HAVE_EPIT
  35         bool
  36
  37 config MXC_USE_EPIT
  38         bool "Use EPIT instead of GPT"
  39         depends on HAVE_EPIT
  40         help
  41           Use EPIT as the system timer on systems that have it. Normally you
  42           don't have a reason to do so as the EPIT has the same features and
  43           uses the same clocks as the GPT. Anyway, on some systems the GPT
  44           may be in use for other purposes.
  45
  46 config ARCH_HAS_RNGA
  47         bool
  48
  49 config HAVE_IMX_ANATOP
  50         bool
  51
  52 config HAVE_IMX_GPC
  53         bool
  54         select PM_GENERIC_DOMAINS if PM
  55
  56 config HAVE_IMX_MMDC
  57         bool
  58
  59 config HAVE_IMX_SRC
  60         def_bool y if SMP
  61         select ARCH_HAS_RESET_CONTROLLER
  62
  63 config IMX_HAVE_IOMUX_V1
  64         bool
  65
  66 config ARCH_MXC_IOMUX_V3
  67         bool
  68
  69 config SOC_IMX1
  70         bool
  71         select CPU_ARM920T
  72         select IMX_HAVE_IOMUX_V1
  73         select MXC_AVIC
  74         select PINCTRL_IMX1
  75
  76 config SOC_IMX21
  77         bool
  78         select CPU_ARM926T
  79         select IMX_HAVE_IOMUX_V1
  80         select MXC_AVIC
  81
  82 config SOC_IMX27
  83         bool
  84         select CPU_ARM926T
  85         select IMX_HAVE_IOMUX_V1
  86         select MXC_AVIC
  87         select PINCTRL_IMX27
  88
  89 config SOC_IMX31
  90         bool
  91         select CPU_V6
  92         select IMX_HAVE_PLATFORM_MXC_RNGA
  93         select MXC_AVIC
  94         select SMP_ON_UP if SMP
  95
  96 config SOC_IMX35
  97         bool
  98         select ARCH_MXC_IOMUX_V3
  99         select HAVE_EPIT
 100         select MXC_AVIC
 101         select PINCTRL_IMX35
 102         select SMP_ON_UP if SMP
 103
 104 if ARCH_MULTI_V4T
 105
 106 comment "MX1 platforms:"
 107
 108 config MACH_SCB9328
 109         bool "Synertronixx scb9328"
 110         select IMX_HAVE_PLATFORM_IMX_UART
 111         select SOC_IMX1
 112         help
 113           Say Y here if you are using a Synertronixx scb9328 board
 114
 115 config MACH_APF9328
 116         bool "APF9328"
 117         select IMX_HAVE_PLATFORM_IMX_I2C
 118         select IMX_HAVE_PLATFORM_IMX_UART
 119         select SOC_IMX1
 120         help
 121           Say Yes here if you are using the Armadeus APF9328 development board
 122
 123 config MACH_IMX1_DT
 124         bool "Support i.MX1 platforms from device tree"
 125         select SOC_IMX1
 126         help
 127           Include support for Freescale i.MX1 based platforms
 128           using the device tree for discovery.
 129
 130 endif
 131
 132 if ARCH_MULTI_V5
 133
 134 comment "MX21 platforms:"
 135
 136 config MACH_MX21ADS
 137         bool "MX21ADS platform"
 138         select IMX_HAVE_PLATFORM_IMX_FB
 139         select IMX_HAVE_PLATFORM_IMX_UART
 140         select IMX_HAVE_PLATFORM_MXC_MMC
 141         select IMX_HAVE_PLATFORM_MXC_NAND
 142         select SOC_IMX21
 143         help
 144           Include support for MX21ADS platform. This includes specific
 145           configurations for the board and its peripherals.
 146
 147 comment "MX27 platforms:"
 148
 149 config MACH_MX27ADS
 150         bool "MX27ADS platform"
 151         select IMX_HAVE_PLATFORM_IMX_FB
 152         select IMX_HAVE_PLATFORM_IMX_I2C
 153         select IMX_HAVE_PLATFORM_IMX_UART
 154         select IMX_HAVE_PLATFORM_MXC_MMC
 155         select IMX_HAVE_PLATFORM_MXC_NAND
 156         select IMX_HAVE_PLATFORM_MXC_W1
 157         select SOC_IMX27
 158         help
 159           Include support for MX27ADS platform. This includes specific
 160           configurations for the board and its peripherals.
 161
 162 config MACH_MX27_3DS
 163         bool "MX27PDK platform"
 164         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 165         select IMX_HAVE_PLATFORM_IMX2_WDT
 166         select IMX_HAVE_PLATFORM_IMX_FB
 167         select IMX_HAVE_PLATFORM_IMX_I2C
 168         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 169         select IMX_HAVE_PLATFORM_IMX_SSI
 170         select IMX_HAVE_PLATFORM_IMX_UART
 171         select IMX_HAVE_PLATFORM_MX2_CAMERA
 172         select IMX_HAVE_PLATFORM_MXC_EHCI
 173         select IMX_HAVE_PLATFORM_MXC_MMC
 174         select IMX_HAVE_PLATFORM_SPI_IMX
 175         select MXC_DEBUG_BOARD
 176         select USB_ULPI_VIEWPORT if USB_ULPI
 177         select SOC_IMX27
 178         help
 179           Include support for MX27PDK platform. This includes specific
 180           configurations for the board and its peripherals.
 181
 182 config MACH_IMX27_VISSTRIM_M10
 183         bool "Vista Silicon i.MX27 Visstrim_m10"
 184         select IMX_HAVE_PLATFORM_GPIO_KEYS
 185         select IMX_HAVE_PLATFORM_IMX_I2C
 186         select IMX_HAVE_PLATFORM_IMX_SSI
 187         select IMX_HAVE_PLATFORM_IMX_UART
 188         select IMX_HAVE_PLATFORM_MX2_CAMERA
 189         select IMX_HAVE_PLATFORM_MX2_EMMA
 190         select IMX_HAVE_PLATFORM_MXC_EHCI
 191         select IMX_HAVE_PLATFORM_MXC_MMC
 192         select LEDS_GPIO_REGISTER
 193         select SOC_IMX27
 194         help
 195           Include support for Visstrim_m10 platform and its different variants.
 196           This includes specific configurations for the board and its
 197           peripherals.
 198
 199 config MACH_PCA100
 200         bool "Phytec phyCARD-s (pca100)"
 201         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 202         select IMX_HAVE_PLATFORM_IMX2_WDT
 203         select IMX_HAVE_PLATFORM_IMX_FB
 204         select IMX_HAVE_PLATFORM_IMX_I2C
 205         select IMX_HAVE_PLATFORM_IMX_SSI
 206         select IMX_HAVE_PLATFORM_IMX_UART
 207         select IMX_HAVE_PLATFORM_MXC_EHCI
 208         select IMX_HAVE_PLATFORM_MXC_MMC
 209         select IMX_HAVE_PLATFORM_MXC_NAND
 210         select IMX_HAVE_PLATFORM_MXC_W1
 211         select IMX_HAVE_PLATFORM_SPI_IMX
 212         select USB_ULPI_VIEWPORT if USB_ULPI
 213         select SOC_IMX27
 214         help
 215           Include support for phyCARD-s (aka pca100) platform. This
 216           includes specific configurations for the module and its peripherals.
 217
 218 config MACH_IMX27_DT
 219         bool "Support i.MX27 platforms from device tree"
 220         select SOC_IMX27
 221         help
 222           Include support for Freescale i.MX27 based platforms
 223           using the device tree for discovery
 224
 225 endif
 226
 227 if ARCH_MULTI_V6
 228
 229 comment "MX31 platforms:"
 230
 231 config MACH_MX31ADS
 232         bool "Support MX31ADS platforms"
 233         default y
 234         select IMX_HAVE_PLATFORM_IMX_I2C
 235         select IMX_HAVE_PLATFORM_IMX_SSI
 236         select IMX_HAVE_PLATFORM_IMX_UART
 237         select SOC_IMX31
 238         help
 239           Include support for MX31ADS platform. This includes specific
 240           configurations for the board and its peripherals.
 241
 242 config MACH_MX31ADS_WM1133_EV1
 243         bool "Support Wolfson Microelectronics 1133-EV1 module"
 244         depends on MACH_MX31ADS
 245         depends on MFD_WM8350_I2C
 246         depends on REGULATOR_WM8350 = y
 247         help
 248           Include support for the Wolfson Microelectronics 1133-EV1 PMU
 249           and audio module for the MX31ADS platform.
 250
 251 config MACH_MX31LILLY
 252         bool "Support MX31 LILLY-1131 platforms (INCO startec)"
 253         select IMX_HAVE_PLATFORM_IMX_UART
 254         select IMX_HAVE_PLATFORM_IPU_CORE
 255         select IMX_HAVE_PLATFORM_MXC_EHCI
 256         select IMX_HAVE_PLATFORM_MXC_MMC
 257         select IMX_HAVE_PLATFORM_SPI_IMX
 258         select USB_ULPI_VIEWPORT if USB_ULPI
 259         select SOC_IMX31
 260         help
 261           Include support for mx31 based LILLY1131 modules. This includes
 262           specific configurations for the board and its peripherals.
 263
 264 config MACH_MX31LITE
 265         bool "Support MX31 LITEKIT (LogicPD)"
 266         select IMX_HAVE_PLATFORM_IMX2_WDT
 267         select IMX_HAVE_PLATFORM_IMX_UART
 268         select IMX_HAVE_PLATFORM_MXC_EHCI
 269         select IMX_HAVE_PLATFORM_MXC_MMC
 270         select IMX_HAVE_PLATFORM_MXC_NAND
 271         select IMX_HAVE_PLATFORM_MXC_RTC
 272         select IMX_HAVE_PLATFORM_SPI_IMX
 273         select LEDS_GPIO_REGISTER
 274         select USB_ULPI_VIEWPORT if USB_ULPI
 275         select SOC_IMX31
 276         help
 277           Include support for MX31 LITEKIT platform. This includes specific
 278           configurations for the board and its peripherals.
 279
 280 config MACH_PCM037
 281         bool "Support Phytec pcm037 (i.MX31) platforms"
 282         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 283         select IMX_HAVE_PLATFORM_IMX2_WDT
 284         select IMX_HAVE_PLATFORM_IMX_I2C
 285         select IMX_HAVE_PLATFORM_IMX_UART
 286         select IMX_HAVE_PLATFORM_IPU_CORE
 287         select IMX_HAVE_PLATFORM_MXC_EHCI
 288         select IMX_HAVE_PLATFORM_MXC_MMC
 289         select IMX_HAVE_PLATFORM_MXC_NAND
 290         select IMX_HAVE_PLATFORM_MXC_W1
 291         select USB_ULPI_VIEWPORT if USB_ULPI
 292         select SOC_IMX31
 293         help
 294           Include support for Phytec pcm037 platform. This includes
 295           specific configurations for the board and its peripherals.
 296
 297 config MACH_PCM037_EET
 298         bool "Support pcm037 EET board extensions"
 299         depends on MACH_PCM037
 300         select IMX_HAVE_PLATFORM_GPIO_KEYS
 301         select IMX_HAVE_PLATFORM_SPI_IMX
 302         help
 303           Add support for PCM037 EET baseboard extensions. If you are using the
 304           OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
 305           command-line parameter.
 306
 307 config MACH_MX31_3DS
 308         bool "Support MX31PDK (3DS)"
 309         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 310         select IMX_HAVE_PLATFORM_IMX2_WDT
 311         select IMX_HAVE_PLATFORM_IMX_I2C
 312         select IMX_HAVE_PLATFORM_IMX_KEYPAD
 313         select IMX_HAVE_PLATFORM_IMX_SSI
 314         select IMX_HAVE_PLATFORM_IMX_UART
 315         select IMX_HAVE_PLATFORM_IPU_CORE
 316         select IMX_HAVE_PLATFORM_MXC_EHCI
 317         select IMX_HAVE_PLATFORM_MXC_MMC
 318         select IMX_HAVE_PLATFORM_MXC_NAND
 319         select IMX_HAVE_PLATFORM_SPI_IMX
 320         select MXC_DEBUG_BOARD
 321         select USB_ULPI_VIEWPORT if USB_ULPI
 322         select SOC_IMX31
 323         help
 324           Include support for MX31PDK (3DS) platform. This includes specific
 325           configurations for the board and its peripherals.
 326
 327 config MACH_MX31_3DS_MXC_NAND_USE_BBT
 328         bool "Make the MXC NAND driver use the in flash Bad Block Table"
 329         depends on MACH_MX31_3DS
 330         depends on MTD_NAND_MXC
 331         help
 332           Enable this if you want that the MXC NAND driver uses the in flash
 333           Bad Block Table to know what blocks are bad instead of scanning the
 334           entire flash looking for bad block markers.
 335
 336 config MACH_MX31MOBOARD
 337         bool "Support mx31moboard platforms (EPFL Mobots group)"
 338         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 339         select IMX_HAVE_PLATFORM_IMX2_WDT
 340         select IMX_HAVE_PLATFORM_IMX_I2C
 341         select IMX_HAVE_PLATFORM_IMX_SSI
 342         select IMX_HAVE_PLATFORM_IMX_UART
 343         select IMX_HAVE_PLATFORM_IPU_CORE
 344         select IMX_HAVE_PLATFORM_MXC_EHCI
 345         select IMX_HAVE_PLATFORM_MXC_MMC
 346         select IMX_HAVE_PLATFORM_SPI_IMX
 347         select LEDS_GPIO_REGISTER
 348         select USB_ULPI_VIEWPORT if USB_ULPI
 349         select SOC_IMX31
 350         help
 351           Include support for mx31moboard platform. This includes specific
 352           configurations for the board and its peripherals.
 353
 354 config MACH_QONG
 355         bool "Support Dave/DENX QongEVB-LITE platform"
 356         select IMX_HAVE_PLATFORM_IMX2_WDT
 357         select IMX_HAVE_PLATFORM_IMX_UART
 358         select SOC_IMX31
 359         help
 360           Include support for Dave/DENX QongEVB-LITE platform. This includes
 361           specific configurations for the board and its peripherals.
 362
 363 config MACH_ARMADILLO5X0
 364         bool "Support Atmark Armadillo-500 Development Base Board"
 365         select IMX_HAVE_PLATFORM_GPIO_KEYS
 366         select IMX_HAVE_PLATFORM_IMX_I2C
 367         select IMX_HAVE_PLATFORM_IMX_UART
 368         select IMX_HAVE_PLATFORM_IPU_CORE
 369         select IMX_HAVE_PLATFORM_MXC_EHCI
 370         select IMX_HAVE_PLATFORM_MXC_MMC
 371         select IMX_HAVE_PLATFORM_MXC_NAND
 372         select USB_ULPI_VIEWPORT if USB_ULPI
 373         select SOC_IMX31
 374         help
 375           Include support for Atmark Armadillo-500 platform. This includes
 376           specific configurations for the board and its peripherals.
 377
 378 config MACH_KZM_ARM11_01
 379         bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
 380         select IMX_HAVE_PLATFORM_IMX_UART
 381         select SOC_IMX31
 382         help
 383           Include support for KZM-ARM11-01. This includes specific
 384           configurations for the board and its peripherals.
 385
 386 config MACH_BUG
 387         bool "Support Buglabs BUGBase platform"
 388         default y
 389         select IMX_HAVE_PLATFORM_IMX_UART
 390         select SOC_IMX31
 391         help
 392           Include support for BUGBase 1.3 platform. This includes specific
 393           configurations for the board and its peripherals.
 394
 395 config MACH_IMX31_DT
 396         bool "Support i.MX31 platforms from device tree"
 397         select SOC_IMX31
 398         help
 399           Include support for Freescale i.MX31 based platforms
 400           using the device tree for discovery.
 401
 402 comment "MX35 platforms:"
 403
 404 config MACH_IMX35_DT
 405         bool "Support i.MX35 platforms from device tree"
 406         select SOC_IMX35
 407         help
 408           Include support for Freescale i.MX35 based platforms
 409           using the device tree for discovery.
 410
 411 config MACH_PCM043
 412         bool "Support Phytec pcm043 (i.MX35) platforms"
 413         select IMX_HAVE_PLATFORM_FLEXCAN
 414         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 415         select IMX_HAVE_PLATFORM_IMX2_WDT
 416         select IMX_HAVE_PLATFORM_IMX_I2C
 417         select IMX_HAVE_PLATFORM_IMX_SSI
 418         select IMX_HAVE_PLATFORM_IMX_UART
 419         select IMX_HAVE_PLATFORM_IPU_CORE
 420         select IMX_HAVE_PLATFORM_MXC_EHCI
 421         select IMX_HAVE_PLATFORM_MXC_NAND
 422         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 423         select USB_ULPI_VIEWPORT if USB_ULPI
 424         select SOC_IMX35
 425         help
 426           Include support for Phytec pcm043 platform. This includes
 427           specific configurations for the board and its peripherals.
 428
 429 config MACH_MX35_3DS
 430         bool "Support MX35PDK platform"
 431         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 432         select IMX_HAVE_PLATFORM_IMX2_WDT
 433         select IMX_HAVE_PLATFORM_IMX_FB
 434         select IMX_HAVE_PLATFORM_IMX_I2C
 435         select IMX_HAVE_PLATFORM_IMX_UART
 436         select IMX_HAVE_PLATFORM_IPU_CORE
 437         select IMX_HAVE_PLATFORM_MXC_EHCI
 438         select IMX_HAVE_PLATFORM_MXC_NAND
 439         select IMX_HAVE_PLATFORM_MXC_RTC
 440         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 441         select MXC_DEBUG_BOARD
 442         select SOC_IMX35
 443         help
 444           Include support for MX35PDK platform. This includes specific
 445           configurations for the board and its peripherals.
 446
 447 config MACH_EUKREA_CPUIMX35SD
 448         bool "Support Eukrea CPUIMX35 Platform"
 449         select IMX_HAVE_PLATFORM_FLEXCAN
 450         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 451         select IMX_HAVE_PLATFORM_IMX2_WDT
 452         select IMX_HAVE_PLATFORM_IMX_I2C
 453         select IMX_HAVE_PLATFORM_IMX_UART
 454         select IMX_HAVE_PLATFORM_MXC_EHCI
 455         select IMX_HAVE_PLATFORM_MXC_NAND
 456         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 457         select USB_ULPI_VIEWPORT if USB_ULPI
 458         select SOC_IMX35
 459         help
 460           Include support for Eukrea CPUIMX35 platform. This includes
 461           specific configurations for the board and its peripherals.
 462
 463 choice
 464         prompt "Baseboard"
 465         depends on MACH_EUKREA_CPUIMX35SD
 466         default MACH_EUKREA_MBIMXSD35_BASEBOARD
 467
 468 config MACH_EUKREA_MBIMXSD35_BASEBOARD
 469         bool "Eukrea MBIMXSD development board"
 470         select IMX_HAVE_PLATFORM_GPIO_KEYS
 471         select IMX_HAVE_PLATFORM_IMX_SSI
 472         select IMX_HAVE_PLATFORM_IPU_CORE
 473         select IMX_HAVE_PLATFORM_SPI_IMX
 474         select LEDS_GPIO_REGISTER
 475         help
 476           This adds board specific devices that can be found on Eukrea's
 477           MBIMXSD evaluation board.
 478
 479 endchoice
 480
 481 config MACH_VPR200
 482         bool "Support VPR200 platform"
 483         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 484         select IMX_HAVE_PLATFORM_GPIO_KEYS
 485         select IMX_HAVE_PLATFORM_IMX2_WDT
 486         select IMX_HAVE_PLATFORM_IMX_I2C
 487         select IMX_HAVE_PLATFORM_IMX_UART
 488         select IMX_HAVE_PLATFORM_IPU_CORE
 489         select IMX_HAVE_PLATFORM_MXC_EHCI
 490         select IMX_HAVE_PLATFORM_MXC_NAND
 491         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 492         select SOC_IMX35
 493         help
 494           Include support for VPR200 platform. This includes specific
 495           configurations for the board and its peripherals.
 496
 497 endif
 498
 499 if ARCH_MULTI_V5
 500
 501 comment "Device tree only"
 502
 503 config SOC_IMX25
 504         bool "i.MX25 support"
 505         select ARCH_MXC_IOMUX_V3
 506         select CPU_ARM926T
 507         select MXC_AVIC
 508         select PINCTRL_IMX25
 509         help
 510           This enables support for Freescale i.MX25 processor
 511 endif
 512
 513 if ARCH_MULTI_V7
 514
 515 comment "Device tree only"
 516
 517 config SOC_IMX5
 518         bool
 519         select HAVE_IMX_SRC
 520         select MXC_TZIC
 521
 522 config  SOC_IMX50
 523         bool "i.MX50 support"
 524         select PINCTRL_IMX50
 525         select SOC_IMX5
 526
 527         help
 528           This enables support for Freescale i.MX50 processor.
 529
 530 config SOC_IMX51
 531         bool "i.MX51 support"
 532         select PINCTRL_IMX51
 533         select SOC_IMX5
 534         help
 535           This enables support for Freescale i.MX51 processor
 536
 537 config  SOC_IMX53
 538         bool "i.MX53 support"
 539         select PINCTRL_IMX53
 540         select SOC_IMX5
 541
 542         help
 543           This enables support for Freescale i.MX53 processor.
 544
 545 config SOC_IMX6
 546         bool
 547         select ARM_ERRATA_754322
 548         select ARM_ERRATA_775420
 549         select ARM_GIC
 550         select HAVE_IMX_ANATOP
 551         select HAVE_IMX_GPC
 552         select HAVE_IMX_MMDC
 553         select HAVE_IMX_SRC
 554         select MFD_SYSCON
 555         select PL310_ERRATA_769419 if CACHE_L2X0
 556
 557 config SOC_IMX6Q
 558         bool "i.MX6 Quad/DualLite support"
 559         select ARM_ERRATA_764369 if SMP
 560         select HAVE_ARM_SCU if SMP
 561         select HAVE_ARM_TWD if SMP
 562         select PCI_DOMAINS if PCI
 563         select PINCTRL_IMX6Q
 564         select SOC_IMX6
 565
 566         help
 567           This enables support for Freescale i.MX6 Quad processor.
 568
 569 config SOC_IMX6SL
 570         bool "i.MX6 SoloLite support"
 571         select PINCTRL_IMX6SL
 572         select SOC_IMX6
 573
 574         help
 575           This enables support for Freescale i.MX6 SoloLite processor.
 576
 577 config SOC_IMX6SX
 578         bool "i.MX6 SoloX support"
 579         select PINCTRL_IMX6SX
 580         select SOC_IMX6
 581
 582         help
 583           This enables support for Freescale i.MX6 SoloX processor.
 584
 585 config SOC_VF610
 586         bool "Vybrid Family VF610 support"
 587         select IRQ_DOMAIN_HIERARCHY
 588         select ARM_GIC
 589         select PINCTRL_VF610
 590         select PL310_ERRATA_769419 if CACHE_L2X0
 591         select SMP_ON_UP if SMP
 592
 593         help
 594           This enables support for Freescale Vybrid VF610 processor.
 595
 596 choice
 597         prompt "Clocksource for scheduler clock"
 598         depends on SOC_VF610
 599         default VF_USE_ARM_GLOBAL_TIMER
 600
 601         config VF_USE_ARM_GLOBAL_TIMER
 602                 bool "Use ARM Global Timer"
 603                 select ARM_GLOBAL_TIMER
 604                 select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 605                 help
 606                   Use the ARM Global Timer as clocksource
 607
 608         config VF_USE_PIT_TIMER
 609                 bool "Use PIT timer"
 610                 select VF_PIT_TIMER
 611                 help
 612                   Use SoC Periodic Interrupt Timer (PIT) as clocksource
 613
 614 endchoice
 615
 616 config SOC_LS1021A
 617         bool "Freescale LS1021A support"
 618         select ARM_GIC
 619         select HAVE_ARM_ARCH_TIMER
 620         select PCI_DOMAINS if PCI
 621         select ZONE_DMA if ARM_LPAE
 622
 623         help
 624           This enables support for Freescale LS1021A processor.
 625
 626 endif
 627
 628 source "arch/arm/mach-imx/devices/Kconfig"
 629
 630 endif