arch/arm/mach-davinci/Kconfig

   1 if ARCH_DAVINCI
   2
   3 config AINTC
   4         bool
   5
   6 config CP_INTC
   7         bool
   8
   9 config ARCH_DAVINCI_DMx
  10         select CPU_ARM926T
  11         bool
  12
  13 menu "TI DaVinci Implementations"
  14
  15 comment "DaVinci Core Type"
  16
  17 config ARCH_DAVINCI_DM644x
  18         bool "DaVinci 644x based system"
  19         select AINTC
  20         select ARCH_DAVINCI_DMx
  21
  22 config ARCH_DAVINCI_DM355
  23         bool "DaVinci 355 based system"
  24         select AINTC
  25         select ARCH_DAVINCI_DMx
  26
  27 config ARCH_DAVINCI_DM646x
  28         bool "DaVinci 646x based system"
  29         select AINTC
  30         select ARCH_DAVINCI_DMx
  31
  32 config ARCH_DAVINCI_DA830
  33         bool "DA830/OMAP-L137/AM17x based system"
  34         select CP_INTC
  35         select ARCH_DAVINCI_DA8XX
  36         select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
  37
  38 config ARCH_DAVINCI_DA850
  39         bool "DA850/OMAP-L138/AM18x based system"
  40         select CP_INTC
  41         select ARCH_DAVINCI_DA8XX
  42         select ARCH_HAS_CPUFREQ
  43
  44 config ARCH_DAVINCI_DA8XX
  45         select CPU_ARM926T
  46         bool
  47
  48 config ARCH_DAVINCI_DM365
  49         bool "DaVinci 365 based system"
  50         select AINTC
  51         select ARCH_DAVINCI_DMx
  52
  53 config ARCH_DAVINCI_TNETV107X
  54         select CPU_V6
  55         select CP_INTC
  56         bool "TNETV107X based system"
  57
  58 comment "DaVinci Board Type"
  59
  60 config MACH_DAVINCI_EVM
  61         bool "TI DM644x EVM"
  62         default ARCH_DAVINCI_DM644x
  63         depends on ARCH_DAVINCI_DM644x
  64         select MISC_DEVICES
  65         select EEPROM_AT24
  66         help
  67           Configure this option to specify the whether the board used
  68           for development is a DM644x EVM
  69
  70 config MACH_SFFSDR
  71         bool "Lyrtech SFFSDR"
  72         depends on ARCH_DAVINCI_DM644x
  73         select MISC_DEVICES
  74         select EEPROM_AT24
  75         help
  76           Say Y here to select the Lyrtech Small Form Factor
  77           Software Defined Radio (SFFSDR) board.
  78
  79 config MACH_NEUROS_OSD2
  80         bool "Neuros OSD2 Open Television Set Top Box"
  81         depends on ARCH_DAVINCI_DM644x
  82         help
  83           Configure this option to specify the whether the board used
  84           for development is a Neuros OSD2 Open Set Top Box.
  85
  86 config MACH_DAVINCI_DM355_EVM
  87         bool "TI DM355 EVM"
  88         default ARCH_DAVINCI_DM355
  89         depends on ARCH_DAVINCI_DM355
  90         help
  91           Configure this option to specify the whether the board used
  92           for development is a DM355 EVM
  93
  94 config MACH_DM355_LEOPARD
  95         bool "DM355 Leopard board"
  96         depends on ARCH_DAVINCI_DM355
  97         help
  98           Configure this option to specify the whether the board used
  99           for development is a DM355 Leopard board.
 100
 101 config MACH_DAVINCI_DM6467_EVM
 102         bool "TI DM6467 EVM"
 103         default ARCH_DAVINCI_DM646x
 104         depends on ARCH_DAVINCI_DM646x
 105         select MACH_DAVINCI_DM6467TEVM
 106         select MISC_DEVICES
 107         select EEPROM_AT24
 108         help
 109           Configure this option to specify the whether the board used
 110           for development is a DM6467 EVM
 111
 112 config MACH_DAVINCI_DM6467TEVM
 113         bool
 114
 115 config MACH_DAVINCI_DM365_EVM
 116         bool "TI DM365 EVM"
 117         default ARCH_DAVINCI_DM365
 118         depends on ARCH_DAVINCI_DM365
 119         select MISC_DEVICES
 120         select EEPROM_AT24
 121         help
 122           Configure this option to specify whether the board used
 123           for development is a DM365 EVM
 124
 125 config MACH_DAVINCI_DA830_EVM
 126         bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 127         default ARCH_DAVINCI_DA830
 128         depends on ARCH_DAVINCI_DA830
 129         select GPIO_PCF857X
 130         select MISC_DEVICES
 131         select EEPROM_AT24
 132         help
 133           Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 134
 135 choice
 136         prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
 137         depends on MACH_DAVINCI_DA830_EVM
 138         help
 139           The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
 140           detected automatically based on successful probe of the I2C
 141           based GPIO expander on that board. This option selected in this
 142           menu has an effect only in case of a successful UI card detection.
 143
 144 config DA830_UI_LCD
 145         bool "LCD"
 146         help
 147           Say Y here to use the LCD as a framebuffer or simple character
 148           display.
 149
 150 config DA830_UI_NAND
 151         bool "NAND flash"
 152         help
 153           Say Y here to use the NAND flash. Do not forget to setup
 154           the switch correctly.
 155 endchoice
 156
 157 config MACH_DAVINCI_DA850_EVM
 158         bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 159         default ARCH_DAVINCI_DA850
 160         depends on ARCH_DAVINCI_DA850
 161         help
 162           Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 163
 164 choice
 165         prompt "Select peripherals connected to expander on UI board"
 166         depends on MACH_DAVINCI_DA850_EVM
 167         help
 168           The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
 169           EVM is detected automatically based on successful probe of the I2C
 170           based GPIO expander on that card. This option selected in this
 171           menu has an effect only in case of a successful UI card detection.
 172
 173 config DA850_UI_NONE
 174         bool "No peripheral is enabled"
 175         help
 176           Say Y if you do not want to enable any of the peripherals connected
 177           to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
 178
 179 config DA850_UI_RMII
 180         bool "RMII Ethernet PHY"
 181         help
 182           Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
 183           EVM. This PHY is found on the UI daughter card that is supplied with
 184           the EVM.
 185           NOTE: Please take care while choosing this option, MII PHY will
 186           not be functional if RMII mode is selected.
 187
 188 endchoice
 189
 190 config GPIO_PCA953X
 191         default MACH_DAVINCI_DA850_EVM
 192
 193 config KEYBOARD_GPIO_POLLED
 194         default MACH_DAVINCI_DA850_EVM
 195
 196 config MACH_TNETV107X
 197         bool "TI TNETV107X Reference Platform"
 198         default ARCH_DAVINCI_TNETV107X
 199         depends on ARCH_DAVINCI_TNETV107X
 200         help
 201           Say Y here to select the TI TNETV107X Evaluation Module.
 202
 203 config MACH_MITYOMAPL138
 204         bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 205         depends on ARCH_DAVINCI_DA850
 206         select MISC_DEVICES
 207         select EEPROM_AT24
 208         help
 209           Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 210           System on Module.  Information on this SoM may be found at
 211           http://www.mitydsp.com
 212
 213 config MACH_OMAPL138_HAWKBOARD
 214         bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 215         depends on ARCH_DAVINCI_DA850
 216         help
 217           Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
 218           Information of this board may be found at
 219           http://www.hawkboard.org/
 220
 221 config DAVINCI_MUX
 222         bool "DAVINCI multiplexing support"
 223         depends on ARCH_DAVINCI
 224         default y
 225         help
 226           Pin multiplexing support for DAVINCI boards. If your bootloader
 227           sets the multiplexing correctly, say N. Otherwise, or if unsure,
 228           say Y.
 229
 230 config DAVINCI_MUX_DEBUG
 231         bool "Multiplexing debug output"
 232         depends on DAVINCI_MUX
 233         help
 234           Makes the multiplexing functions print out a lot of debug info.
 235           This is useful if you want to find out the correct values of the
 236           multiplexing registers.
 237
 238 config DAVINCI_MUX_WARNINGS
 239         bool "Warn about pins the bootloader didn't set up"
 240         depends on DAVINCI_MUX
 241         help
 242           Choose Y here to warn whenever driver initialization logic needs
 243           to change the pin multiplexing setup. When there are no warnings
 244           printed, it's safe to deselect DAVINCI_MUX for your product.
 245
 246 config DAVINCI_RESET_CLOCKS
 247         bool "Reset unused clocks during boot"
 248         depends on ARCH_DAVINCI
 249         help
 250           Say Y if you want to reset unused clocks during boot.
 251           This option saves power, but assumes all drivers are
 252           using the clock framework. Broken drivers that do not
 253           yet use clock framework may not work with this option.
 254           If you are booting from another operating system, you
 255           probably do not want this option enabled until your
 256           device drivers work properly.
 257
 258 endmenu
 259
 260 endif