1 ------------------------------------------------------------------------------
2 T H E /proc F I L E S Y S T E M
3 ------------------------------------------------------------------------------
4 /proc/sys Terrehon Bowden <terrehon@pacbell.net> October 7 1999
5 Bodo Bauer <bb@ricochet.net>
7 2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000
8 move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009
9 ------------------------------------------------------------------------------
10 Version 1.3 Kernel version 2.2.12
11 Kernel version 2.4.0-test11-pre4
12 ------------------------------------------------------------------------------
13 fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009
19 0.1 Introduction/Credits
22 1 Collecting System Information
23 1.1 Process-Specific Subdirectories
25 1.3 IDE devices in /proc/ide
26 1.4 Networking info in /proc/net
28 1.6 Parallel port info in /proc/parport
29 1.7 TTY info in /proc/tty
30 1.8 Miscellaneous kernel statistics in /proc/stat
31 1.9 Ext4 file system parameters
33 2 Modifying System Parameters
35 3 Per-Process Parameters
36 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
38 3.2 /proc/<pid>/oom_score - Display current oom-killer score
39 3.3 /proc/<pid>/io - Display the IO accounting fields
40 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
41 3.5 /proc/<pid>/mountinfo - Information about mounts
42 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
45 ------------------------------------------------------------------------------
47 ------------------------------------------------------------------------------
49 0.1 Introduction/Credits
50 ------------------------
52 This documentation is part of a soon (or so we hope) to be released book on
53 the SuSE Linux distribution. As there is no complete documentation for the
54 /proc file system and we've used many freely available sources to write these
55 chapters, it seems only fair to give the work back to the Linux community.
56 This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm
57 afraid it's still far from complete, but we hope it will be useful. As far as
58 we know, it is the first 'all-in-one' document about the /proc file system. It
59 is focused on the Intel x86 hardware, so if you are looking for PPC, ARM,
60 SPARC, AXP, etc., features, you probably won't find what you are looking for.
61 It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But
62 additions and patches are welcome and will be added to this document if you
65 We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of
66 other people for help compiling this documentation. We'd also like to extend a
67 special thank you to Andi Kleen for documentation, which we relied on heavily
68 to create this document, as well as the additional information he provided.
69 Thanks to everybody else who contributed source or docs to the Linux kernel
70 and helped create a great piece of software... :)
72 If you have any comments, corrections or additions, please don't hesitate to
73 contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this
76 The latest version of this document is available online at
77 http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
79 If the above direction does not works for you, you could try the kernel
80 mailing list at linux-kernel@vger.kernel.org and/or try to reach me at
81 comandante@zaralinux.com.
86 We don't guarantee the correctness of this document, and if you come to us
87 complaining about how you screwed up your system because of incorrect
88 documentation, we won't feel responsible...
90 ------------------------------------------------------------------------------
91 CHAPTER 1: COLLECTING SYSTEM INFORMATION
92 ------------------------------------------------------------------------------
94 ------------------------------------------------------------------------------
96 ------------------------------------------------------------------------------
97 * Investigating the properties of the pseudo file system /proc and its
98 ability to provide information on the running Linux system
99 * Examining /proc's structure
100 * Uncovering various information about the kernel and the processes running
102 ------------------------------------------------------------------------------
105 The proc file system acts as an interface to internal data structures in the
106 kernel. It can be used to obtain information about the system and to change
107 certain kernel parameters at runtime (sysctl).
109 First, we'll take a look at the read-only parts of /proc. In Chapter 2, we
110 show you how you can use /proc/sys to change settings.
112 1.1 Process-Specific Subdirectories
113 -----------------------------------
115 The directory /proc contains (among other things) one subdirectory for each
116 process running on the system, which is named after the process ID (PID).
118 The link self points to the process reading the file system. Each process
119 subdirectory has the entries listed in Table 1-1.
122 Table 1-1: Process specific entries in /proc
123 ..............................................................................
125 clear_refs Clears page referenced bits shown in smaps output
126 cmdline Command line arguments
127 cpu Current and last cpu in which it was executed (2.4)(smp)
128 cwd Link to the current working directory
129 environ Values of environment variables
130 exe Link to the executable of this process
131 fd Directory, which contains all file descriptors
132 maps Memory maps to executables and library files (2.4)
133 mem Memory held by this process
134 root Link to the root directory of this process
136 statm Process memory status information
137 status Process status in human readable form
138 wchan If CONFIG_KALLSYMS is set, a pre-decoded wchan
139 stack Report full stack trace, enable via CONFIG_STACKTRACE
140 smaps a extension based on maps, showing the memory consumption of
142 ..............................................................................
144 For example, to get the status information of a process, all you have to do is
145 read the file /proc/PID/status:
147 >cat /proc/self/status
171 SigPnd: 0000000000000000
172 ShdPnd: 0000000000000000
173 SigBlk: 0000000000000000
174 SigIgn: 0000000000000000
175 SigCgt: 0000000000000000
176 CapInh: 00000000fffffeff
177 CapPrm: 0000000000000000
178 CapEff: 0000000000000000
179 CapBnd: ffffffffffffffff
180 voluntary_ctxt_switches: 0
181 nonvoluntary_ctxt_switches: 1
183 This shows you nearly the same information you would get if you viewed it with
184 the ps command. In fact, ps uses the proc file system to obtain its
185 information. But you get a more detailed view of the process by reading the
186 file /proc/PID/status. It fields are described in table 1-2.
188 The statm file contains more detailed information about the process
189 memory usage. Its seven fields are explained in Table 1-3. The stat file
190 contains details information about the process itself. Its fields are
191 explained in Table 1-4.
193 (for SMP CONFIG users)
194 For making accounting scalable, RSS related information are handled in
195 asynchronous manner and the vaule may not be very precise. To see a precise
196 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
197 It's slow but very precise.
199 Table 1-2: Contents of the status files (as of 2.6.30-rc7)
200 ..............................................................................
202 Name filename of the executable
203 State state (R is running, S is sleeping, D is sleeping
204 in an uninterruptible wait, Z is zombie,
205 T is traced or stopped)
208 PPid process id of the parent process
209 TracerPid PID of process tracing this process (0 if not)
210 Uid Real, effective, saved set, and file system UIDs
211 Gid Real, effective, saved set, and file system GIDs
212 FDSize number of file descriptor slots currently allocated
213 Groups supplementary group list
214 VmPeak peak virtual memory size
215 VmSize total program size
216 VmLck locked memory size
217 VmHWM peak resident set size ("high water mark")
218 VmRSS size of memory portions
219 VmData size of data, stack, and text segments
220 VmStk size of data, stack, and text segments
221 VmExe size of text segment
222 VmLib size of shared library code
223 VmPTE size of page table entries
224 VmSwap size of swap usage (the number of referred swapents)
225 Threads number of threads
226 SigQ number of signals queued/max. number for queue
227 SigPnd bitmap of pending signals for the thread
228 ShdPnd bitmap of shared pending signals for the process
229 SigBlk bitmap of blocked signals
230 SigIgn bitmap of ignored signals
231 SigCgt bitmap of catched signals
232 CapInh bitmap of inheritable capabilities
233 CapPrm bitmap of permitted capabilities
234 CapEff bitmap of effective capabilities
235 CapBnd bitmap of capabilities bounding set
236 Cpus_allowed mask of CPUs on which this process may run
237 Cpus_allowed_list Same as previous, but in "list format"
238 Mems_allowed mask of memory nodes allowed to this process
239 Mems_allowed_list Same as previous, but in "list format"
240 voluntary_ctxt_switches number of voluntary context switches
241 nonvoluntary_ctxt_switches number of non voluntary context switches
242 ..............................................................................
244 Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
245 ..............................................................................
247 size total program size (pages) (same as VmSize in status)
248 resident size of memory portions (pages) (same as VmRSS in status)
249 shared number of pages that are shared (i.e. backed by a file)
250 trs number of pages that are 'code' (not including libs; broken,
251 includes data segment)
252 lrs number of pages of library (always 0 on 2.6)
253 drs number of pages of data/stack (including libs; broken,
254 includes library text)
255 dt number of dirty pages (always 0 on 2.6)
256 ..............................................................................
259 Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
260 ..............................................................................
263 tcomm filename of the executable
264 state state (R is running, S is sleeping, D is sleeping in an
265 uninterruptible wait, Z is zombie, T is traced or stopped)
266 ppid process id of the parent process
267 pgrp pgrp of the process
269 tty_nr tty the process uses
270 tty_pgrp pgrp of the tty
272 min_flt number of minor faults
273 cmin_flt number of minor faults with child's
274 maj_flt number of major faults
275 cmaj_flt number of major faults with child's
276 utime user mode jiffies
277 stime kernel mode jiffies
278 cutime user mode jiffies with child's
279 cstime kernel mode jiffies with child's
280 priority priority level
282 num_threads number of threads
283 it_real_value (obsolete, always 0)
284 start_time time the process started after system boot
285 vsize virtual memory size
286 rss resident set memory size
287 rsslim current limit in bytes on the rss
288 start_code address above which program text can run
289 end_code address below which program text can run
290 start_stack address of the start of the stack
291 esp current value of ESP
292 eip current value of EIP
293 pending bitmap of pending signals
294 blocked bitmap of blocked signals
295 sigign bitmap of ignored signals
296 sigcatch bitmap of catched signals
297 wchan address where process went to sleep
300 exit_signal signal to send to parent thread on exit
301 task_cpu which CPU the task is scheduled on
302 rt_priority realtime priority
303 policy scheduling policy (man sched_setscheduler)
304 blkio_ticks time spent waiting for block IO
305 gtime guest time of the task in jiffies
306 cgtime guest time of the task children in jiffies
307 ..............................................................................
309 The /proc/PID/maps file containing the currently mapped memory regions and
310 their access permissions.
314 address perms offset dev inode pathname
316 08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
317 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
318 0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
319 a7cb1000-a7cb2000 ---p 00000000 00:00 0
320 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
321 a7eb2000-a7eb3000 ---p 00000000 00:00 0
322 a7eb3000-a7ed5000 rw-p 00000000 00:00 0
323 a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
324 a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
325 a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
326 a800b000-a800e000 rw-p 00000000 00:00 0
327 a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
328 a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
329 a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
330 a8024000-a8027000 rw-p 00000000 00:00 0
331 a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
332 a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
333 a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
334 aff35000-aff4a000 rw-p 00000000 00:00 0 [stack]
335 ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
337 where "address" is the address space in the process that it occupies, "perms"
338 is a set of permissions:
344 p = private (copy on write)
346 "offset" is the offset into the mapping, "dev" is the device (major:minor), and
347 "inode" is the inode on that device. 0 indicates that no inode is associated
348 with the memory region, as the case would be with BSS (uninitialized data).
349 The "pathname" shows the name associated file for this mapping. If the mapping
350 is not associated with a file:
352 [heap] = the heap of the program
353 [stack] = the stack of the main process
354 [vdso] = the "virtual dynamic shared object",
355 the kernel system call handler
357 or if empty, the mapping is anonymous.
360 The /proc/PID/smaps is an extension based on maps, showing the memory
361 consumption for each of the process's mappings. For each of mappings there
362 is a series of lines such as the following:
364 08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash
377 The first of these lines shows the same information as is displayed for the
378 mapping in /proc/PID/maps. The remaining lines show the size of the mapping,
379 the amount of the mapping that is currently resident in RAM, the "proportional
380 set size” (divide each shared page by the number of processes sharing it), the
381 number of clean and dirty shared pages in the mapping, and the number of clean
382 and dirty private pages in the mapping. The "Referenced" indicates the amount
383 of memory currently marked as referenced or accessed.
385 This file is only present if the CONFIG_MMU kernel configuration option is
388 The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
389 bits on both physical and virtual pages associated with a process.
390 To clear the bits for all the pages associated with the process
391 > echo 1 > /proc/PID/clear_refs
393 To clear the bits for the anonymous pages associated with the process
394 > echo 2 > /proc/PID/clear_refs
396 To clear the bits for the file mapped pages associated with the process
397 > echo 3 > /proc/PID/clear_refs
398 Any other value written to /proc/PID/clear_refs will have no effect.
404 Similar to the process entries, the kernel data files give information about
405 the running kernel. The files used to obtain this information are contained in
406 /proc and are listed in Table 1-5. Not all of these will be present in your
407 system. It depends on the kernel configuration and the loaded modules, which
408 files are there, and which are missing.
410 Table 1-5: Kernel info in /proc
411 ..............................................................................
413 apm Advanced power management info
414 buddyinfo Kernel memory allocator information (see text) (2.5)
415 bus Directory containing bus specific information
416 cmdline Kernel command line
417 cpuinfo Info about the CPU
418 devices Available devices (block and character)
419 dma Used DMS channels
420 filesystems Supported filesystems
421 driver Various drivers grouped here, currently rtc (2.4)
422 execdomains Execdomains, related to security (2.4)
423 fb Frame Buffer devices (2.4)
424 fs File system parameters, currently nfs/exports (2.4)
425 ide Directory containing info about the IDE subsystem
426 interrupts Interrupt usage
427 iomem Memory map (2.4)
428 ioports I/O port usage
429 irq Masks for irq to cpu affinity (2.4)(smp?)
430 isapnp ISA PnP (Plug&Play) Info (2.4)
431 kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4))
433 ksyms Kernel symbol table
434 loadavg Load average of last 1, 5 & 15 minutes
438 modules List of loaded modules
439 mounts Mounted filesystems
440 net Networking info (see text)
441 pagetypeinfo Additional page allocator information (see text) (2.5)
442 partitions Table of partitions known to the system
443 pci Deprecated info of PCI bus (new way -> /proc/bus/pci/,
444 decoupled by lspci (2.4)
446 scsi SCSI info (see text)
447 slabinfo Slab pool info
448 softirqs softirq usage
449 stat Overall statistics
450 swaps Swap space utilization
452 sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4)
453 tty Info of tty drivers
455 version Kernel version
456 video bttv info of video resources (2.4)
457 vmallocinfo Show vmalloced areas
458 ..............................................................................
460 You can, for example, check which interrupts are currently in use and what
461 they are used for by looking in the file /proc/interrupts:
463 > cat /proc/interrupts
465 0: 8728810 XT-PIC timer
466 1: 895 XT-PIC keyboard
468 3: 531695 XT-PIC aha152x
469 4: 2014133 XT-PIC serial
470 5: 44401 XT-PIC pcnet_cs
473 12: 182918 XT-PIC PS/2 Mouse
475 14: 1232265 XT-PIC ide0
479 In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the
480 output of a SMP machine):
482 > cat /proc/interrupts
485 0: 1243498 1214548 IO-APIC-edge timer
486 1: 8949 8958 IO-APIC-edge keyboard
487 2: 0 0 XT-PIC cascade
488 5: 11286 10161 IO-APIC-edge soundblaster
489 8: 1 0 IO-APIC-edge rtc
490 9: 27422 27407 IO-APIC-edge 3c503
491 12: 113645 113873 IO-APIC-edge PS/2 Mouse
493 14: 22491 24012 IO-APIC-edge ide0
494 15: 2183 2415 IO-APIC-edge ide1
495 17: 30564 30414 IO-APIC-level eth0
496 18: 177 164 IO-APIC-level bttv
501 NMI is incremented in this case because every timer interrupt generates a NMI
502 (Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups.
504 LOC is the local interrupt counter of the internal APIC of every CPU.
506 ERR is incremented in the case of errors in the IO-APIC bus (the bus that
507 connects the CPUs in a SMP system. This means that an error has been detected,
508 the IO-APIC automatically retry the transmission, so it should not be a big
509 problem, but you should read the SMP-FAQ.
511 In 2.6.2* /proc/interrupts was expanded again. This time the goal was for
512 /proc/interrupts to display every IRQ vector in use by the system, not
513 just those considered 'most important'. The new vectors are:
515 THR -- interrupt raised when a machine check threshold counter
516 (typically counting ECC corrected errors of memory or cache) exceeds
517 a configurable threshold. Only available on some systems.
519 TRM -- a thermal event interrupt occurs when a temperature threshold
520 has been exceeded for the CPU. This interrupt may also be generated
521 when the temperature drops back to normal.
523 SPU -- a spurious interrupt is some interrupt that was raised then lowered
524 by some IO device before it could be fully processed by the APIC. Hence
525 the APIC sees the interrupt but does not know what device it came from.
526 For this case the APIC will generate the interrupt with a IRQ vector
527 of 0xff. This might also be generated by chipset bugs.
529 RES, CAL, TLB -- rescheduling, call and TLB flush interrupts are
530 sent from one CPU to another per the needs of the OS. Typically,
531 their statistics are used by kernel developers and interested users to
532 determine the occurrence of interrupts of the given type.
534 The above IRQ vectors are displayed only when relevent. For example,
535 the threshold vector does not exist on x86_64 platforms. Others are
536 suppressed when the system is a uniprocessor. As of this writing, only
537 i386 and x86_64 platforms support the new IRQ vector displays.
539 Of some interest is the introduction of the /proc/irq directory to 2.4.
540 It could be used to set IRQ to CPU affinity, this means that you can "hook" an
541 IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the
542 irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and
547 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask
548 1 11 13 15 17 19 3 5 7 9 default_smp_affinity
552 smp_affinity is a bitmask, in which you can specify which CPUs can handle the
553 IRQ, you can set it by doing:
555 > echo 1 > /proc/irq/10/smp_affinity
557 This means that only the first CPU will handle the IRQ, but you can also echo
558 5 which means that only the first and fourth CPU can handle the IRQ.
560 The contents of each smp_affinity file is the same by default:
562 > cat /proc/irq/0/smp_affinity
565 The default_smp_affinity mask applies to all non-active IRQs, which are the
566 IRQs which have not yet been allocated/activated, and hence which lack a
567 /proc/irq/[0-9]* directory.
569 The node file on an SMP system shows the node to which the device using the IRQ
570 reports itself as being attached. This hardware locality information does not
571 include information about any possible driver locality preference.
573 prof_cpu_mask specifies which CPUs are to be profiled by the system wide
574 profiler. Default value is ffffffff (all cpus).
576 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
577 between all the CPUs which are allowed to handle it. As usual the kernel has
578 more info than you and does a better job than you, so the defaults are the
579 best choice for almost everyone.
581 There are three more important subdirectories in /proc: net, scsi, and sys.
582 The general rule is that the contents, or even the existence of these
583 directories, depend on your kernel configuration. If SCSI is not enabled, the
584 directory scsi may not exist. The same is true with the net, which is there
585 only when networking support is present in the running kernel.
587 The slabinfo file gives information about memory usage at the slab level.
588 Linux uses slab pools for memory management above page level in version 2.2.
589 Commonly used objects have their own slab pool (such as network buffers,
590 directory cache, and so on).
592 ..............................................................................
594 > cat /proc/buddyinfo
596 Node 0, zone DMA 0 4 5 4 4 3 ...
597 Node 0, zone Normal 1 0 0 1 101 8 ...
598 Node 0, zone HighMem 2 0 0 1 1 0 ...
600 External fragmentation is a problem under some workloads, and buddyinfo is a
601 useful tool for helping diagnose these problems. Buddyinfo will give you a
602 clue as to how big an area you can safely allocate, or why a previous
605 Each column represents the number of pages of a certain order which are
606 available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
607 ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
608 available in ZONE_NORMAL, etc...
610 More information relevant to external fragmentation can be found in
613 > cat /proc/pagetypeinfo
617 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
618 Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0
619 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
620 Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2
621 Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0
622 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
623 Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9
624 Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0
625 Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452
626 Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0
627 Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
629 Number of blocks type Unmovable Reclaimable Movable Reserve Isolate
630 Node 0, zone DMA 2 0 5 1 0
631 Node 0, zone DMA32 41 6 967 2 0
633 Fragmentation avoidance in the kernel works by grouping pages of different
634 migrate types into the same contiguous regions of memory called page blocks.
635 A page block is typically the size of the default hugepage size e.g. 2MB on
636 X86-64. By keeping pages grouped based on their ability to move, the kernel
637 can reclaim pages within a page block to satisfy a high-order allocation.
639 The pagetypinfo begins with information on the size of a page block. It
640 then gives the same type of information as buddyinfo except broken down
641 by migrate-type and finishes with details on how many page blocks of each
644 If min_free_kbytes has been tuned correctly (recommendations made by hugeadm
645 from libhugetlbfs http://sourceforge.net/projects/libhugetlbfs/), one can
646 make an estimate of the likely number of huge pages that can be allocated
647 at a given point in time. All the "Movable" blocks should be allocatable
648 unless memory has been mlock()'d. Some of the Reclaimable blocks should
649 also be allocatable although a lot of filesystem metadata may have to be
650 reclaimed to achieve this.
652 ..............................................................................
656 Provides information about distribution and utilization of memory. This
657 varies by architecture and compile options. The following is from a
658 16GB PIII, which has highmem enabled. You may not have all of these fields.
663 MemTotal: 16344972 kB
670 HighTotal: 15597528 kB
671 HighFree: 13629632 kB
681 SReclaimable: 159856 kB
682 SUnreclaim: 124508 kB
687 CommitLimit: 7669796 kB
688 Committed_AS: 100056 kB
689 VmallocTotal: 112216 kB
691 VmallocChunk: 111088 kB
693 MemTotal: Total usable ram (i.e. physical ram minus a few reserved
694 bits and the kernel binary code)
695 MemFree: The sum of LowFree+HighFree
696 Buffers: Relatively temporary storage for raw disk blocks
697 shouldn't get tremendously large (20MB or so)
698 Cached: in-memory cache for files read from the disk (the
699 pagecache). Doesn't include SwapCached
700 SwapCached: Memory that once was swapped out, is swapped back in but
701 still also is in the swapfile (if memory is needed it
702 doesn't need to be swapped out AGAIN because it is already
703 in the swapfile. This saves I/O)
704 Active: Memory that has been used more recently and usually not
705 reclaimed unless absolutely necessary.
706 Inactive: Memory which has been less recently used. It is more
707 eligible to be reclaimed for other purposes
709 HighFree: Highmem is all memory above ~860MB of physical memory
710 Highmem areas are for use by userspace programs, or
711 for the pagecache. The kernel must use tricks to access
712 this memory, making it slower to access than lowmem.
714 LowFree: Lowmem is memory which can be used for everything that
715 highmem can be used for, but it is also available for the
716 kernel's use for its own data structures. Among many
717 other things, it is where everything from the Slab is
718 allocated. Bad things happen when you're out of lowmem.
719 SwapTotal: total amount of swap space available
720 SwapFree: Memory which has been evicted from RAM, and is temporarily
722 Dirty: Memory which is waiting to get written back to the disk
723 Writeback: Memory which is actively being written back to the disk
724 AnonPages: Non-file backed pages mapped into userspace page tables
725 Mapped: files which have been mmaped, such as libraries
726 Slab: in-kernel data structures cache
727 SReclaimable: Part of Slab, that might be reclaimed, such as caches
728 SUnreclaim: Part of Slab, that cannot be reclaimed on memory pressure
729 PageTables: amount of memory dedicated to the lowest level of page
731 NFS_Unstable: NFS pages sent to the server, but not yet committed to stable
733 Bounce: Memory used for block device "bounce buffers"
734 WritebackTmp: Memory used by FUSE for temporary writeback buffers
735 CommitLimit: Based on the overcommit ratio ('vm.overcommit_ratio'),
736 this is the total amount of memory currently available to
737 be allocated on the system. This limit is only adhered to
738 if strict overcommit accounting is enabled (mode 2 in
739 'vm.overcommit_memory').
740 The CommitLimit is calculated with the following formula:
741 CommitLimit = ('vm.overcommit_ratio' * Physical RAM) + Swap
742 For example, on a system with 1G of physical RAM and 7G
743 of swap with a `vm.overcommit_ratio` of 30 it would
744 yield a CommitLimit of 7.3G.
745 For more details, see the memory overcommit documentation
746 in vm/overcommit-accounting.
747 Committed_AS: The amount of memory presently allocated on the system.
748 The committed memory is a sum of all of the memory which
749 has been allocated by processes, even if it has not been
750 "used" by them as of yet. A process which malloc()'s 1G
751 of memory, but only touches 300M of it will only show up
752 as using 300M of memory even if it has the address space
753 allocated for the entire 1G. This 1G is memory which has
754 been "committed" to by the VM and can be used at any time
755 by the allocating application. With strict overcommit
756 enabled on the system (mode 2 in 'vm.overcommit_memory'),
757 allocations which would exceed the CommitLimit (detailed
758 above) will not be permitted. This is useful if one needs
759 to guarantee that processes will not fail due to lack of
760 memory once that memory has been successfully allocated.
761 VmallocTotal: total size of vmalloc memory area
762 VmallocUsed: amount of vmalloc area which is used
763 VmallocChunk: largest contiguous block of vmalloc area which is free
765 ..............................................................................
769 Provides information about vmalloced/vmaped areas. One line per area,
770 containing the virtual address range of the area, size in bytes,
771 caller information of the creator, and optional information depending
772 on the kind of area :
774 pages=nr number of pages
775 phys=addr if a physical address was specified
776 ioremap I/O mapping (ioremap() and friends)
777 vmalloc vmalloc() area
780 vpages buffer for pages pointers was vmalloced (huge area)
781 N<node>=nr (Only on NUMA kernels)
782 Number of pages allocated on memory node <node>
784 > cat /proc/vmallocinfo
785 0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
786 /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
787 0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
788 /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
789 0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
790 phys=7fee8000 ioremap
791 0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
792 phys=7fee7000 ioremap
793 0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
794 0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
795 /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
796 0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
798 0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
799 /0x130 [x_tables] pages=4 vmalloc N0=4
800 0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
801 pages=14 vmalloc N2=14
802 0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
804 0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
806 0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
807 pages=10 vmalloc N0=10
809 ..............................................................................
813 Provides counts of softirq handlers serviced since boot time, for each cpu.
818 TIMER: 27166 27120 27097 27034
823 SCHED: 27035 26983 26971 26746
825 RCU: 1678 1769 2178 2250
828 1.3 IDE devices in /proc/ide
829 ----------------------------
831 The subdirectory /proc/ide contains information about all IDE devices of which
832 the kernel is aware. There is one subdirectory for each IDE controller, the
833 file drivers and a link for each IDE device, pointing to the device directory
834 in the controller specific subtree.
836 The file drivers contains general information about the drivers used for the
839 > cat /proc/ide/drivers
840 ide-cdrom version 4.53
841 ide-disk version 1.08
843 More detailed information can be found in the controller specific
844 subdirectories. These are named ide0, ide1 and so on. Each of these
845 directories contains the files shown in table 1-6.
848 Table 1-6: IDE controller info in /proc/ide/ide?
849 ..............................................................................
851 channel IDE channel (0 or 1)
852 config Configuration (only for PCI/IDE bridge)
854 model Type/Chipset of IDE controller
855 ..............................................................................
857 Each device connected to a controller has a separate subdirectory in the
858 controllers directory. The files listed in table 1-7 are contained in these
862 Table 1-7: IDE device information
863 ..............................................................................
866 capacity Capacity of the medium (in 512Byte blocks)
867 driver driver and version
868 geometry physical and logical geometry
869 identify device identify block
871 model device identifier
872 settings device setup
873 smart_thresholds IDE disk management thresholds
874 smart_values IDE disk management values
875 ..............................................................................
877 The most interesting file is settings. This file contains a nice overview of
878 the drive parameters:
880 # cat /proc/ide/ide0/hda/settings
881 name value min max mode
882 ---- ----- --- --- ----
883 bios_cyl 526 0 65535 rw
884 bios_head 255 0 255 rw
886 breada_readahead 4 0 127 rw
888 file_readahead 72 0 2097151 rw
890 keepsettings 0 0 1 rw
891 max_kb_per_request 122 1 127 rw
895 pio_mode write-only 0 255 w
901 1.4 Networking info in /proc/net
902 --------------------------------
904 The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the
905 additional values you get for IP version 6 if you configure the kernel to
906 support this. Table 1-9 lists the files and their meaning.
909 Table 1-8: IPv6 info in /proc/net
910 ..............................................................................
912 udp6 UDP sockets (IPv6)
913 tcp6 TCP sockets (IPv6)
914 raw6 Raw device statistics (IPv6)
915 igmp6 IP multicast addresses, which this host joined (IPv6)
916 if_inet6 List of IPv6 interface addresses
917 ipv6_route Kernel routing table for IPv6
918 rt6_stats Global IPv6 routing tables statistics
919 sockstat6 Socket statistics (IPv6)
920 snmp6 Snmp data (IPv6)
921 ..............................................................................
924 Table 1-9: Network info in /proc/net
925 ..............................................................................
928 dev network devices with statistics
929 dev_mcast the Layer2 multicast groups a device is listening too
930 (interface index, label, number of references, number of bound
932 dev_stat network device status
933 ip_fwchains Firewall chain linkage
934 ip_fwnames Firewall chain names
935 ip_masq Directory containing the masquerading tables
936 ip_masquerade Major masquerading table
937 netstat Network statistics
938 raw raw device statistics
939 route Kernel routing table
940 rpc Directory containing rpc info
941 rt_cache Routing cache
943 sockstat Socket statistics
945 tr_rif Token ring RIF routing table
947 unix UNIX domain sockets
948 wireless Wireless interface data (Wavelan etc)
949 igmp IP multicast addresses, which this host joined
950 psched Global packet scheduler parameters.
951 netlink List of PF_NETLINK sockets
952 ip_mr_vifs List of multicast virtual interfaces
953 ip_mr_cache List of multicast routing cache
954 ..............................................................................
956 You can use this information to see which network devices are available in
957 your system and how much traffic was routed over those devices:
961 face |bytes packets errs drop fifo frame compressed multicast|[...
962 lo: 908188 5596 0 0 0 0 0 0 [...
963 ppp0:15475140 20721 410 0 0 410 0 0 [...
964 eth0: 614530 7085 0 0 0 0 0 1 [...
967 ...] bytes packets errs drop fifo colls carrier compressed
968 ...] 908188 5596 0 0 0 0 0 0
969 ...] 1375103 17405 0 0 0 0 0 0
970 ...] 1703981 5535 0 0 0 3 0 0
972 In addition, each Channel Bond interface has its own directory. For
973 example, the bond0 device will have a directory called /proc/net/bond0/.
974 It will contain information that is specific to that bond, such as the
975 current slaves of the bond, the link status of the slaves, and how
976 many times the slaves link has failed.
981 If you have a SCSI host adapter in your system, you'll find a subdirectory
982 named after the driver for this adapter in /proc/scsi. You'll also see a list
983 of all recognized SCSI devices in /proc/scsi:
987 Host: scsi0 Channel: 00 Id: 00 Lun: 00
988 Vendor: IBM Model: DGHS09U Rev: 03E0
989 Type: Direct-Access ANSI SCSI revision: 03
990 Host: scsi0 Channel: 00 Id: 06 Lun: 00
991 Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04
992 Type: CD-ROM ANSI SCSI revision: 02
995 The directory named after the driver has one file for each adapter found in
996 the system. These files contain information about the controller, including
997 the used IRQ and the IO address range. The amount of information shown is
998 dependent on the adapter you use. The example shows the output for an Adaptec
999 AHA-2940 SCSI adapter:
1001 > cat /proc/scsi/aic7xxx/0
1003 Adaptec AIC7xxx driver version: 5.1.19/3.2.4
1005 TCQ Enabled By Default : Disabled
1006 AIC7XXX_PROC_STATS : Disabled
1007 AIC7XXX_RESET_DELAY : 5
1008 Adapter Configuration:
1009 SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
1010 Ultra Wide Controller
1011 PCI MMAPed I/O Base: 0xeb001000
1012 Adapter SEEPROM Config: SEEPROM found and used.
1013 Adaptec SCSI BIOS: Enabled
1015 SCBs: Active 0, Max Active 2,
1016 Allocated 15, HW 16, Page 255
1018 BIOS Control Word: 0x18b6
1019 Adapter Control Word: 0x005b
1020 Extended Translation: Enabled
1021 Disconnect Enable Flags: 0xffff
1022 Ultra Enable Flags: 0x0001
1023 Tag Queue Enable Flags: 0x0000
1024 Ordered Queue Tag Flags: 0x0000
1025 Default Tag Queue Depth: 8
1026 Tagged Queue By Device array for aic7xxx host instance 0:
1027 {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
1028 Actual queue depth per device for aic7xxx host instance 0:
1029 {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
1032 Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8
1033 Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0)
1034 Total transfers 160151 (74577 reads and 85574 writes)
1036 Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15
1037 Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0)
1038 Total transfers 0 (0 reads and 0 writes)
1041 1.6 Parallel port info in /proc/parport
1042 ---------------------------------------
1044 The directory /proc/parport contains information about the parallel ports of
1045 your system. It has one subdirectory for each port, named after the port
1048 These directories contain the four files shown in Table 1-10.
1051 Table 1-10: Files in /proc/parport
1052 ..............................................................................
1054 autoprobe Any IEEE-1284 device ID information that has been acquired.
1055 devices list of the device drivers using that port. A + will appear by the
1056 name of the device currently using the port (it might not appear
1058 hardware Parallel port's base address, IRQ line and DMA channel.
1059 irq IRQ that parport is using for that port. This is in a separate
1060 file to allow you to alter it by writing a new value in (IRQ
1062 ..............................................................................
1064 1.7 TTY info in /proc/tty
1065 -------------------------
1067 Information about the available and actually used tty's can be found in the
1068 directory /proc/tty.You'll find entries for drivers and line disciplines in
1069 this directory, as shown in Table 1-11.
1072 Table 1-11: Files in /proc/tty
1073 ..............................................................................
1075 drivers list of drivers and their usage
1076 ldiscs registered line disciplines
1077 driver/serial usage statistic and status of single tty lines
1078 ..............................................................................
1080 To see which tty's are currently in use, you can simply look into the file
1083 > cat /proc/tty/drivers
1084 pty_slave /dev/pts 136 0-255 pty:slave
1085 pty_master /dev/ptm 128 0-255 pty:master
1086 pty_slave /dev/ttyp 3 0-255 pty:slave
1087 pty_master /dev/pty 2 0-255 pty:master
1088 serial /dev/cua 5 64-67 serial:callout
1089 serial /dev/ttyS 4 64-67 serial
1090 /dev/tty0 /dev/tty0 4 0 system:vtmaster
1091 /dev/ptmx /dev/ptmx 5 2 system
1092 /dev/console /dev/console 5 1 system:console
1093 /dev/tty /dev/tty 5 0 system:/dev/tty
1094 unknown /dev/tty 4 1-63 console
1097 1.8 Miscellaneous kernel statistics in /proc/stat
1098 -------------------------------------------------
1100 Various pieces of information about kernel activity are available in the
1101 /proc/stat file. All of the numbers reported in this file are aggregates
1102 since the system first booted. For a quick look, simply cat the file:
1105 cpu 2255 34 2290 22625563 6290 127 456 0 0
1106 cpu0 1132 34 1441 11311718 3675 127 438 0 0
1107 cpu1 1123 0 849 11313845 2614 0 18 0 0
1108 intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...]
1114 softirq 183433 0 21755 12 39 1137 231 21459 2263
1116 The very first "cpu" line aggregates the numbers in all of the other "cpuN"
1117 lines. These numbers identify the amount of time the CPU has spent performing
1118 different kinds of work. Time units are in USER_HZ (typically hundredths of a
1119 second). The meanings of the columns are as follows, from left to right:
1121 - user: normal processes executing in user mode
1122 - nice: niced processes executing in user mode
1123 - system: processes executing in kernel mode
1124 - idle: twiddling thumbs
1125 - iowait: waiting for I/O to complete
1126 - irq: servicing interrupts
1127 - softirq: servicing softirqs
1128 - steal: involuntary wait
1129 - guest: running a normal guest
1130 - guest_nice: running a niced guest
1132 The "intr" line gives counts of interrupts serviced since boot time, for each
1133 of the possible system interrupts. The first column is the total of all
1134 interrupts serviced; each subsequent column is the total for that particular
1137 The "ctxt" line gives the total number of context switches across all CPUs.
1139 The "btime" line gives the time at which the system booted, in seconds since
1142 The "processes" line gives the number of processes and threads created, which
1143 includes (but is not limited to) those created by calls to the fork() and
1144 clone() system calls.
1146 The "procs_running" line gives the total number of threads that are
1147 running or ready to run (i.e., the total number of runnable threads).
1149 The "procs_blocked" line gives the number of processes currently blocked,
1150 waiting for I/O to complete.
1152 The "softirq" line gives counts of softirqs serviced since boot time, for each
1153 of the possible system softirqs. The first column is the total of all
1154 softirqs serviced; each subsequent column is the total for that particular
1158 1.9 Ext4 file system parameters
1159 ------------------------------
1161 Information about mounted ext4 file systems can be found in
1162 /proc/fs/ext4. Each mounted filesystem will have a directory in
1163 /proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
1164 /proc/fs/ext4/dm-0). The files in each per-device directory are shown
1165 in Table 1-12, below.
1167 Table 1-12: Files in /proc/fs/ext4/<devname>
1168 ..............................................................................
1170 mb_groups details of multiblock allocator buddy cache of free blocks
1171 ..............................................................................
1174 ------------------------------------------------------------------------------
1176 ------------------------------------------------------------------------------
1177 The /proc file system serves information about the running system. It not only
1178 allows access to process data but also allows you to request the kernel status
1179 by reading files in the hierarchy.
1181 The directory structure of /proc reflects the types of information and makes
1182 it easy, if not obvious, where to look for specific data.
1183 ------------------------------------------------------------------------------
1185 ------------------------------------------------------------------------------
1186 CHAPTER 2: MODIFYING SYSTEM PARAMETERS
1187 ------------------------------------------------------------------------------
1189 ------------------------------------------------------------------------------
1191 ------------------------------------------------------------------------------
1192 * Modifying kernel parameters by writing into files found in /proc/sys
1193 * Exploring the files which modify certain parameters
1194 * Review of the /proc/sys file tree
1195 ------------------------------------------------------------------------------
1198 A very interesting part of /proc is the directory /proc/sys. This is not only
1199 a source of information, it also allows you to change parameters within the
1200 kernel. Be very careful when attempting this. You can optimize your system,
1201 but you can also cause it to crash. Never alter kernel parameters on a
1202 production system. Set up a development machine and test to make sure that
1203 everything works the way you want it to. You may have no alternative but to
1204 reboot the machine once an error has been made.
1206 To change a value, simply echo the new value into the file. An example is
1207 given below in the section on the file system data. You need to be root to do
1208 this. You can create your own boot script to perform this every time your
1211 The files in /proc/sys can be used to fine tune and monitor miscellaneous and
1212 general things in the operation of the Linux kernel. Since some of the files
1213 can inadvertently disrupt your system, it is advisable to read both
1214 documentation and source before actually making adjustments. In any case, be
1215 very careful when writing to any of these files. The entries in /proc may
1216 change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt
1217 review the kernel documentation in the directory /usr/src/linux/Documentation.
1218 This chapter is heavily based on the documentation included in the pre 2.2
1219 kernels, and became part of it in version 2.2.1 of the Linux kernel.
1221 Please see: Documentation/sysctls/ directory for descriptions of these
1224 ------------------------------------------------------------------------------
1226 ------------------------------------------------------------------------------
1227 Certain aspects of kernel behavior can be modified at runtime, without the
1228 need to recompile the kernel, or even to reboot the system. The files in the
1229 /proc/sys tree can not only be read, but also modified. You can use the echo
1230 command to write value into these files, thereby changing the default settings
1232 ------------------------------------------------------------------------------
1234 ------------------------------------------------------------------------------
1235 CHAPTER 3: PER-PROCESS PARAMETERS
1236 ------------------------------------------------------------------------------
1238 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
1239 --------------------------------------------------------------------------------
1241 These file can be used to adjust the badness heuristic used to select which
1242 process gets killed in out of memory conditions.
1244 The badness heuristic assigns a value to each candidate task ranging from 0
1245 (never kill) to 1000 (always kill) to determine which process is targeted. The
1246 units are roughly a proportion along that range of allowed memory the process
1247 may allocate from based on an estimation of its current memory and swap use.
1248 For example, if a task is using all allowed memory, its badness score will be
1249 1000. If it is using half of its allowed memory, its score will be 500.
1251 There is an additional factor included in the badness score: root
1252 processes are given 3% extra memory over other tasks.
1254 The amount of "allowed" memory depends on the context in which the oom killer
1255 was called. If it is due to the memory assigned to the allocating task's cpuset
1256 being exhausted, the allowed memory represents the set of mems assigned to that
1257 cpuset. If it is due to a mempolicy's node(s) being exhausted, the allowed
1258 memory represents the set of mempolicy nodes. If it is due to a memory
1259 limit (or swap limit) being reached, the allowed memory is that configured
1260 limit. Finally, if it is due to the entire system being out of memory, the
1261 allowed memory represents all allocatable resources.
1263 The value of /proc/<pid>/oom_score_adj is added to the badness score before it
1264 is used to determine which task to kill. Acceptable values range from -1000
1265 (OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX). This allows userspace to
1266 polarize the preference for oom killing either by always preferring a certain
1267 task or completely disabling it. The lowest possible value, -1000, is
1268 equivalent to disabling oom killing entirely for that task since it will always
1269 report a badness score of 0.
1271 Consequently, it is very simple for userspace to define the amount of memory to
1272 consider for each task. Setting a /proc/<pid>/oom_score_adj value of +500, for
1273 example, is roughly equivalent to allowing the remainder of tasks sharing the
1274 same system, cpuset, mempolicy, or memory controller resources to use at least
1275 50% more memory. A value of -500, on the other hand, would be roughly
1276 equivalent to discounting 50% of the task's allowed memory from being considered
1277 as scoring against the task.
1279 For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
1280 be used to tune the badness score. Its acceptable values range from -16
1281 (OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
1282 (OOM_DISABLE) to disable oom killing entirely for that task. Its value is
1283 scaled linearly with /proc/<pid>/oom_score_adj.
1285 Writing to /proc/<pid>/oom_score_adj or /proc/<pid>/oom_adj will change the
1286 other with its scaled value.
1288 NOTICE: /proc/<pid>/oom_adj is deprecated and will be removed, please see
1289 Documentation/feature-removal-schedule.txt.
1291 Caveat: when a parent task is selected, the oom killer will sacrifice any first
1292 generation children with seperate address spaces instead, if possible. This
1293 avoids servers and important system daemons from being killed and loses the
1294 minimal amount of work.
1297 3.2 /proc/<pid>/oom_score - Display current oom-killer score
1298 -------------------------------------------------------------
1300 This file can be used to check the current score used by the oom-killer is for
1301 any given <pid>. Use it together with /proc/<pid>/oom_adj to tune which
1302 process should be killed in an out-of-memory situation.
1305 3.3 /proc/<pid>/io - Display the IO accounting fields
1306 -------------------------------------------------------
1308 This file contains IO statistics for each running process
1313 test:/tmp # dd if=/dev/zero of=/tmp/test.dat &
1316 test:/tmp # cat /proc/3828/io
1322 write_bytes: 323932160
1323 cancelled_write_bytes: 0
1332 I/O counter: chars read
1333 The number of bytes which this task has caused to be read from storage. This
1334 is simply the sum of bytes which this process passed to read() and pread().
1335 It includes things like tty IO and it is unaffected by whether or not actual
1336 physical disk IO was required (the read might have been satisfied from
1343 I/O counter: chars written
1344 The number of bytes which this task has caused, or shall cause to be written
1345 to disk. Similar caveats apply here as with rchar.
1351 I/O counter: read syscalls
1352 Attempt to count the number of read I/O operations, i.e. syscalls like read()
1359 I/O counter: write syscalls
1360 Attempt to count the number of write I/O operations, i.e. syscalls like
1361 write() and pwrite().
1367 I/O counter: bytes read
1368 Attempt to count the number of bytes which this process really did cause to
1369 be fetched from the storage layer. Done at the submit_bio() level, so it is
1370 accurate for block-backed filesystems. <please add status regarding NFS and
1371 CIFS at a later time>
1377 I/O counter: bytes written
1378 Attempt to count the number of bytes which this process caused to be sent to
1379 the storage layer. This is done at page-dirtying time.
1382 cancelled_write_bytes
1383 ---------------------
1385 The big inaccuracy here is truncate. If a process writes 1MB to a file and
1386 then deletes the file, it will in fact perform no writeout. But it will have
1387 been accounted as having caused 1MB of write.
1388 In other words: The number of bytes which this process caused to not happen,
1389 by truncating pagecache. A task can cause "negative" IO too. If this task
1390 truncates some dirty pagecache, some IO which another task has been accounted
1391 for (in its write_bytes) will not be happening. We _could_ just subtract that
1392 from the truncating task's write_bytes, but there is information loss in doing
1399 At its current implementation state, this is a bit racy on 32-bit machines: if
1400 process A reads process B's /proc/pid/io while process B is updating one of
1401 those 64-bit counters, process A could see an intermediate result.
1404 More information about this can be found within the taskstats documentation in
1405 Documentation/accounting.
1407 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
1408 ---------------------------------------------------------------
1409 When a process is dumped, all anonymous memory is written to a core file as
1410 long as the size of the core file isn't limited. But sometimes we don't want
1411 to dump some memory segments, for example, huge shared memory. Conversely,
1412 sometimes we want to save file-backed memory segments into a core file, not
1413 only the individual files.
1415 /proc/<pid>/coredump_filter allows you to customize which memory segments
1416 will be dumped when the <pid> process is dumped. coredump_filter is a bitmask
1417 of memory types. If a bit of the bitmask is set, memory segments of the
1418 corresponding memory type are dumped, otherwise they are not dumped.
1420 The following 7 memory types are supported:
1421 - (bit 0) anonymous private memory
1422 - (bit 1) anonymous shared memory
1423 - (bit 2) file-backed private memory
1424 - (bit 3) file-backed shared memory
1425 - (bit 4) ELF header pages in file-backed private memory areas (it is
1426 effective only if the bit 2 is cleared)
1427 - (bit 5) hugetlb private memory
1428 - (bit 6) hugetlb shared memory
1430 Note that MMIO pages such as frame buffer are never dumped and vDSO pages
1431 are always dumped regardless of the bitmask status.
1433 Note bit 0-4 doesn't effect any hugetlb memory. hugetlb memory are only
1434 effected by bit 5-6.
1436 Default value of coredump_filter is 0x23; this means all anonymous memory
1437 segments and hugetlb private memory are dumped.
1439 If you don't want to dump all shared memory segments attached to pid 1234,
1440 write 0x21 to the process's proc file.
1442 $ echo 0x21 > /proc/1234/coredump_filter
1444 When a new process is created, the process inherits the bitmask status from its
1445 parent. It is useful to set up coredump_filter before the program runs.
1448 $ echo 0x7 > /proc/self/coredump_filter
1451 3.5 /proc/<pid>/mountinfo - Information about mounts
1452 --------------------------------------------------------
1454 This file contains lines of the form:
1456 36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue
1457 (1)(2)(3) (4) (5) (6) (7) (8) (9) (10) (11)
1459 (1) mount ID: unique identifier of the mount (may be reused after umount)
1460 (2) parent ID: ID of parent (or of self for the top of the mount tree)
1461 (3) major:minor: value of st_dev for files on filesystem
1462 (4) root: root of the mount within the filesystem
1463 (5) mount point: mount point relative to the process's root
1464 (6) mount options: per mount options
1465 (7) optional fields: zero or more fields of the form "tag[:value]"
1466 (8) separator: marks the end of the optional fields
1467 (9) filesystem type: name of filesystem of the form "type[.subtype]"
1468 (10) mount source: filesystem specific information or "none"
1469 (11) super options: per super block options
1471 Parsers should ignore all unrecognised optional fields. Currently the
1472 possible optional fields are:
1474 shared:X mount is shared in peer group X
1475 master:X mount is slave to peer group X
1476 propagate_from:X mount is slave and receives propagation from peer group X (*)
1477 unbindable mount is unbindable
1479 (*) X is the closest dominant peer group under the process's root. If
1480 X is the immediate master of the mount, or if there's no dominant peer
1481 group under the same root, then only the "master:X" field is present
1482 and not the "propagate_from:X" field.
1484 For more information on mount propagation see:
1486 Documentation/filesystems/sharedsubtree.txt
1489 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
1490 --------------------------------------------------------
1491 These files provide a method to access a tasks comm value. It also allows for
1492 a task to set its own or one of its thread siblings comm value. The comm value
1493 is limited in size compared to the cmdline value, so writing anything longer
1494 then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
projects / GitHub / mt8127 / android_kernel_alcatel_ttab.git / blob