| 1 | /******************************************************************************* |
| 2 | * Agere Systems Inc. |
| 3 | * Wireless device driver for Linux (wlags49). |
| 4 | * |
| 5 | * Copyright (c) 1998-2003 Agere Systems Inc. |
| 6 | * All rights reserved. |
| 7 | * http://www.agere.com |
| 8 | * |
| 9 | * Initially developed by TriplePoint, Inc. |
| 10 | * http://www.triplepoint.com |
| 11 | * |
| 12 | *------------------------------------------------------------------------------ |
| 13 | * |
| 14 | * This file contains processing and initialization specific to PCI/miniPCI |
| 15 | * devices. |
| 16 | * |
| 17 | *------------------------------------------------------------------------------ |
| 18 | * |
| 19 | * SOFTWARE LICENSE |
| 20 | * |
| 21 | * This software is provided subject to the following terms and conditions, |
| 22 | * which you should read carefully before using the software. Using this |
| 23 | * software indicates your acceptance of these terms and conditions. If you do |
| 24 | * not agree with these terms and conditions, do not use the software. |
| 25 | * |
| 26 | * Copyright © 2003 Agere Systems Inc. |
| 27 | * All rights reserved. |
| 28 | * |
| 29 | * Redistribution and use in source or binary forms, with or without |
| 30 | * modifications, are permitted provided that the following conditions are met: |
| 31 | * |
| 32 | * . Redistributions of source code must retain the above copyright notice, this |
| 33 | * list of conditions and the following Disclaimer as comments in the code as |
| 34 | * well as in the documentation and/or other materials provided with the |
| 35 | * distribution. |
| 36 | * |
| 37 | * . Redistributions in binary form must reproduce the above copyright notice, |
| 38 | * this list of conditions and the following Disclaimer in the documentation |
| 39 | * and/or other materials provided with the distribution. |
| 40 | * |
| 41 | * . Neither the name of Agere Systems Inc. nor the names of the contributors |
| 42 | * may be used to endorse or promote products derived from this software |
| 43 | * without specific prior written permission. |
| 44 | * |
| 45 | * Disclaimer |
| 46 | * |
| 47 | * THIS SOFTWARE IS PROVIDED \93AS IS\94 AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| 48 | * INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF |
| 49 | * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ANY |
| 50 | * USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN |
| 51 | * RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY |
| 52 | * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| 53 | * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| 54 | * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| 55 | * ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT |
| 56 | * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| 57 | * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH |
| 58 | * DAMAGE. |
| 59 | * |
| 60 | ******************************************************************************/ |
| 61 | |
| 62 | /******************************************************************************* |
| 63 | * include files |
| 64 | ******************************************************************************/ |
| 65 | #include <wireless/wl_version.h> |
| 66 | |
| 67 | #include <linux/module.h> |
| 68 | #include <linux/kernel.h> |
| 69 | #include <linux/errno.h> |
| 70 | #include <linux/pci.h> |
| 71 | #include <linux/init.h> |
| 72 | #include <linux/sched.h> |
| 73 | #include <linux/ptrace.h> |
| 74 | #include <linux/ctype.h> |
| 75 | #include <linux/string.h> |
| 76 | //#include <linux/timer.h> |
| 77 | #include <linux/interrupt.h> |
| 78 | #include <linux/in.h> |
| 79 | #include <linux/delay.h> |
| 80 | #include <asm/io.h> |
| 81 | #include <asm/irq.h> |
| 82 | #include <asm/bitops.h> |
| 83 | #include <asm/uaccess.h> |
| 84 | |
| 85 | #include <linux/ethtool.h> |
| 86 | #include <linux/netdevice.h> |
| 87 | #include <linux/etherdevice.h> |
| 88 | #include <linux/skbuff.h> |
| 89 | #include <linux/if_arp.h> |
| 90 | #include <linux/ioport.h> |
| 91 | |
| 92 | #include <hcf/debug.h> |
| 93 | |
| 94 | #include <hcf.h> |
| 95 | #include <dhf.h> |
| 96 | #include <hcfdef.h> |
| 97 | |
| 98 | #include <wireless/wl_if.h> |
| 99 | #include <wireless/wl_internal.h> |
| 100 | #include <wireless/wl_util.h> |
| 101 | #include <wireless/wl_main.h> |
| 102 | #include <wireless/wl_netdev.h> |
| 103 | #include <wireless/wl_pci.h> |
| 104 | |
| 105 | |
| 106 | /******************************************************************************* |
| 107 | * global variables |
| 108 | ******************************************************************************/ |
| 109 | #if DBG |
| 110 | extern dbg_info_t *DbgInfo; |
| 111 | #endif // DBG |
| 112 | |
| 113 | /* define the PCI device Table Cardname and id tables */ |
| 114 | static struct pci_device_id wl_pci_tbl[] = { |
| 115 | { PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_0), }, |
| 116 | { PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_1), }, |
| 117 | { PCI_DEVICE(PCI_VENDOR_ID_WL_LKM, PCI_DEVICE_ID_WL_LKM_2), }, |
| 118 | |
| 119 | { } /* Terminating entry */ |
| 120 | }; |
| 121 | |
| 122 | MODULE_DEVICE_TABLE(pci, wl_pci_tbl); |
| 123 | |
| 124 | /******************************************************************************* |
| 125 | * function prototypes |
| 126 | ******************************************************************************/ |
| 127 | int wl_pci_probe( struct pci_dev *pdev, |
| 128 | const struct pci_device_id *ent ); |
| 129 | void wl_pci_remove(struct pci_dev *pdev); |
| 130 | int wl_pci_setup( struct pci_dev *pdev ); |
| 131 | void wl_pci_enable_cardbus_interrupts( struct pci_dev *pdev ); |
| 132 | |
| 133 | #ifdef ENABLE_DMA |
| 134 | int wl_pci_dma_alloc( struct pci_dev *pdev, struct wl_private *lp ); |
| 135 | int wl_pci_dma_free( struct pci_dev *pdev, struct wl_private *lp ); |
| 136 | int wl_pci_dma_alloc_tx_packet( struct pci_dev *pdev, struct wl_private *lp, |
| 137 | DESC_STRCT **desc ); |
| 138 | int wl_pci_dma_free_tx_packet( struct pci_dev *pdev, struct wl_private *lp, |
| 139 | DESC_STRCT **desc ); |
| 140 | int wl_pci_dma_alloc_rx_packet( struct pci_dev *pdev, struct wl_private *lp, |
| 141 | DESC_STRCT **desc ); |
| 142 | int wl_pci_dma_free_rx_packet( struct pci_dev *pdev, struct wl_private *lp, |
| 143 | DESC_STRCT **desc ); |
| 144 | int wl_pci_dma_alloc_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp, |
| 145 | DESC_STRCT **desc, int size ); |
| 146 | int wl_pci_dma_free_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp, |
| 147 | DESC_STRCT **desc ); |
| 148 | int wl_pci_dma_alloc_desc( struct pci_dev *pdev, struct wl_private *lp, |
| 149 | DESC_STRCT **desc ); |
| 150 | int wl_pci_dma_free_desc( struct pci_dev *pdev, struct wl_private *lp, |
| 151 | DESC_STRCT **desc ); |
| 152 | int wl_pci_dma_alloc_buf( struct pci_dev *pdev, struct wl_private *lp, |
| 153 | DESC_STRCT *desc, int size ); |
| 154 | int wl_pci_dma_free_buf( struct pci_dev *pdev, struct wl_private *lp, |
| 155 | DESC_STRCT *desc ); |
| 156 | |
| 157 | void wl_pci_dma_hcf_reclaim_rx( struct wl_private *lp ); |
| 158 | #endif // ENABLE_DMA |
| 159 | |
| 160 | /******************************************************************************* |
| 161 | * PCI module function registration |
| 162 | ******************************************************************************/ |
| 163 | static struct pci_driver wl_driver = { |
| 164 | .name = MODULE_NAME, |
| 165 | .id_table = wl_pci_tbl, |
| 166 | .probe = wl_pci_probe, |
| 167 | .remove = wl_pci_remove, |
| 168 | .suspend = NULL, |
| 169 | .resume = NULL |
| 170 | }; |
| 171 | |
| 172 | /******************************************************************************* |
| 173 | * wl_adapter_init_module() |
| 174 | ******************************************************************************* |
| 175 | * |
| 176 | * DESCRIPTION: |
| 177 | * |
| 178 | * Called by init_module() to perform PCI-specific driver initialization. |
| 179 | * |
| 180 | * PARAMETERS: |
| 181 | * |
| 182 | * N/A |
| 183 | * |
| 184 | * RETURNS: |
| 185 | * |
| 186 | * 0 |
| 187 | * |
| 188 | ******************************************************************************/ |
| 189 | int wl_adapter_init_module( void ) |
| 190 | { |
| 191 | int result; |
| 192 | /*------------------------------------------------------------------------*/ |
| 193 | |
| 194 | DBG_FUNC( "wl_adapter_init_module()" ); |
| 195 | DBG_ENTER( DbgInfo ); |
| 196 | DBG_TRACE( DbgInfo, "wl_adapter_init_module() -- PCI\n" ); |
| 197 | |
| 198 | result = pci_register_driver( &wl_driver ); //;?replace with pci_module_init, Rubini pg 490 |
| 199 | //;? why not do something with the result |
| 200 | |
| 201 | DBG_LEAVE( DbgInfo ); |
| 202 | return 0; |
| 203 | } // wl_adapter_init_module |
| 204 | /*============================================================================*/ |
| 205 | |
| 206 | /******************************************************************************* |
| 207 | * wl_adapter_cleanup_module() |
| 208 | ******************************************************************************* |
| 209 | * |
| 210 | * DESCRIPTION: |
| 211 | * |
| 212 | * Called by cleanup_module() to perform PCI-specific driver cleanup. |
| 213 | * |
| 214 | * PARAMETERS: |
| 215 | * |
| 216 | * N/A |
| 217 | * |
| 218 | * RETURNS: |
| 219 | * |
| 220 | * N/A |
| 221 | * |
| 222 | ******************************************************************************/ |
| 223 | void wl_adapter_cleanup_module( void ) |
| 224 | { |
| 225 | //;?how come wl_adapter_cleanup_module is located in a seemingly pci specific module |
| 226 | DBG_FUNC( "wl_adapter_cleanup_module" ); |
| 227 | DBG_ENTER( DbgInfo ); |
| 228 | |
| 229 | //;?DBG_TRACE below feels like nearly redundant in the light of DBG_ENTER above |
| 230 | DBG_TRACE( DbgInfo, "wl_adapter_cleanup_module() -- PCI\n" ); |
| 231 | |
| 232 | pci_unregister_driver( &wl_driver ); |
| 233 | |
| 234 | DBG_LEAVE( DbgInfo ); |
| 235 | return; |
| 236 | } // wl_adapter_cleanup_module |
| 237 | /*============================================================================*/ |
| 238 | |
| 239 | /******************************************************************************* |
| 240 | * wl_adapter_insert() |
| 241 | ******************************************************************************* |
| 242 | * |
| 243 | * DESCRIPTION: |
| 244 | * |
| 245 | * Called by wl_pci_probe() to continue the process of device insertion. |
| 246 | * |
| 247 | * PARAMETERS: |
| 248 | * |
| 249 | * dev - a pointer to the device's net_device structure |
| 250 | * |
| 251 | * RETURNS: |
| 252 | * |
| 253 | * TRUE or FALSE |
| 254 | * |
| 255 | ******************************************************************************/ |
| 256 | int wl_adapter_insert( struct net_device *dev ) |
| 257 | { |
| 258 | int result = FALSE; |
| 259 | /*------------------------------------------------------------------------*/ |
| 260 | |
| 261 | DBG_FUNC( "wl_adapter_insert" ); |
| 262 | DBG_ENTER( DbgInfo ); |
| 263 | |
| 264 | DBG_TRACE( DbgInfo, "wl_adapter_insert() -- PCI\n" ); |
| 265 | |
| 266 | if( dev == NULL ) { |
| 267 | DBG_ERROR( DbgInfo, "net_device pointer is NULL!!!\n" ); |
| 268 | } else if( dev->priv == NULL ) { |
| 269 | DBG_ERROR( DbgInfo, "wl_private pointer is NULL!!!\n" ); |
| 270 | } else if( wl_insert( dev ) ) { /* Perform remaining device initialization */ |
| 271 | result = TRUE; |
| 272 | } else { |
| 273 | DBG_TRACE( DbgInfo, "wl_insert() FAILED\n" ); |
| 274 | } |
| 275 | DBG_LEAVE( DbgInfo ); |
| 276 | return result; |
| 277 | } // wl_adapter_insert |
| 278 | /*============================================================================*/ |
| 279 | |
| 280 | /******************************************************************************* |
| 281 | * wl_adapter_open() |
| 282 | ******************************************************************************* |
| 283 | * |
| 284 | * DESCRIPTION: |
| 285 | * |
| 286 | * Open the device. |
| 287 | * |
| 288 | * PARAMETERS: |
| 289 | * |
| 290 | * dev - a pointer to the device's net_device structure |
| 291 | * |
| 292 | * RETURNS: |
| 293 | * |
| 294 | * an HCF status code |
| 295 | * |
| 296 | ******************************************************************************/ |
| 297 | int wl_adapter_open( struct net_device *dev ) |
| 298 | { |
| 299 | int result = 0; |
| 300 | int hcf_status = HCF_SUCCESS; |
| 301 | /*------------------------------------------------------------------------*/ |
| 302 | |
| 303 | DBG_FUNC( "wl_adapter_open" ); |
| 304 | DBG_ENTER( DbgInfo ); |
| 305 | |
| 306 | DBG_TRACE( DbgInfo, "wl_adapter_open() -- PCI\n" ); |
| 307 | |
| 308 | hcf_status = wl_open( dev ); |
| 309 | |
| 310 | if( hcf_status != HCF_SUCCESS ) { |
| 311 | result = -ENODEV; |
| 312 | } |
| 313 | |
| 314 | DBG_LEAVE( DbgInfo ); |
| 315 | return result; |
| 316 | } // wl_adapter_open |
| 317 | /*============================================================================*/ |
| 318 | |
| 319 | /******************************************************************************* |
| 320 | * wl_adapter_close() |
| 321 | ******************************************************************************* |
| 322 | * |
| 323 | * DESCRIPTION: |
| 324 | * |
| 325 | * Close the device |
| 326 | * |
| 327 | * PARAMETERS: |
| 328 | * |
| 329 | * dev - a pointer to the device's net_device structure |
| 330 | * |
| 331 | * RETURNS: |
| 332 | * |
| 333 | * 0 |
| 334 | * |
| 335 | ******************************************************************************/ |
| 336 | int wl_adapter_close( struct net_device *dev ) |
| 337 | { |
| 338 | DBG_FUNC( "wl_adapter_close" ); |
| 339 | DBG_ENTER( DbgInfo ); |
| 340 | |
| 341 | DBG_TRACE( DbgInfo, "wl_adapter_close() -- PCI\n" ); |
| 342 | DBG_TRACE( DbgInfo, "%s: Shutting down adapter.\n", dev->name ); |
| 343 | |
| 344 | wl_close( dev ); |
| 345 | |
| 346 | DBG_LEAVE( DbgInfo ); |
| 347 | return 0; |
| 348 | } // wl_adapter_close |
| 349 | /*============================================================================*/ |
| 350 | |
| 351 | /******************************************************************************* |
| 352 | * wl_adapter_is_open() |
| 353 | ******************************************************************************* |
| 354 | * |
| 355 | * DESCRIPTION: |
| 356 | * |
| 357 | * Check whether this device is open. Returns |
| 358 | * |
| 359 | * PARAMETERS: |
| 360 | * |
| 361 | * dev - a pointer to the device's net_device structure |
| 362 | * |
| 363 | * RETURNS: |
| 364 | * |
| 365 | * nonzero if device is open. |
| 366 | * |
| 367 | ******************************************************************************/ |
| 368 | int wl_adapter_is_open( struct net_device *dev ) |
| 369 | { |
| 370 | /* This function is used in PCMCIA to check the status of the 'open' field |
| 371 | in the dev_link_t structure associated with a network device. There |
| 372 | doesn't seem to be an analog to this for PCI, and checking the status |
| 373 | contained in the net_device structure doesn't have the same effect. |
| 374 | For now, return TRUE, but find out if this is necessary for PCI. */ |
| 375 | |
| 376 | return TRUE; |
| 377 | } // wl_adapter_is_open |
| 378 | /*============================================================================*/ |
| 379 | |
| 380 | /******************************************************************************* |
| 381 | * wl_pci_probe() |
| 382 | ******************************************************************************* |
| 383 | * |
| 384 | * DESCRIPTION: |
| 385 | * |
| 386 | * Registered in the pci_driver structure, this function is called when the |
| 387 | * PCI subsystem finds a new PCI device which matches the information contained |
| 388 | * in the pci_device_id table. |
| 389 | * |
| 390 | * PARAMETERS: |
| 391 | * |
| 392 | * pdev - a pointer to the device's pci_dev structure |
| 393 | * ent - this device's entry in the pci_device_id table |
| 394 | * |
| 395 | * RETURNS: |
| 396 | * |
| 397 | * 0 on success |
| 398 | * errno value otherwise |
| 399 | * |
| 400 | ******************************************************************************/ |
| 401 | int wl_pci_probe( struct pci_dev *pdev, |
| 402 | const struct pci_device_id *ent ) |
| 403 | { |
| 404 | int result; |
| 405 | /*------------------------------------------------------------------------*/ |
| 406 | |
| 407 | DBG_FUNC( "wl_pci_probe" ); |
| 408 | DBG_ENTER( DbgInfo ); |
| 409 | DBG_PRINT( "%s\n", VERSION_INFO ); |
| 410 | |
| 411 | result = wl_pci_setup( pdev ); |
| 412 | |
| 413 | DBG_LEAVE( DbgInfo ); |
| 414 | |
| 415 | return result; |
| 416 | } // wl_pci_probe |
| 417 | /*============================================================================*/ |
| 418 | |
| 419 | /******************************************************************************* |
| 420 | * wl_pci_remove() |
| 421 | ******************************************************************************* |
| 422 | * |
| 423 | * DESCRIPTION: |
| 424 | * |
| 425 | * Registered in the pci_driver structure, this function is called when the |
| 426 | * PCI subsystem detects that a PCI device which matches the information |
| 427 | * contained in the pci_device_id table has been removed. |
| 428 | * |
| 429 | * PARAMETERS: |
| 430 | * |
| 431 | * pdev - a pointer to the device's pci_dev structure |
| 432 | * |
| 433 | * RETURNS: |
| 434 | * |
| 435 | * N/A |
| 436 | * |
| 437 | ******************************************************************************/ |
| 438 | void wl_pci_remove(struct pci_dev *pdev) |
| 439 | { |
| 440 | struct net_device *dev = NULL; |
| 441 | /*------------------------------------------------------------------------*/ |
| 442 | |
| 443 | DBG_FUNC( "wl_pci_remove" ); |
| 444 | DBG_ENTER( DbgInfo ); |
| 445 | |
| 446 | /* Make sure the pci_dev pointer passed in is valid */ |
| 447 | if( pdev == NULL ) { |
| 448 | DBG_ERROR( DbgInfo, "PCI subsys passed in an invalid pci_dev pointer\n" ); |
| 449 | return; |
| 450 | } |
| 451 | |
| 452 | dev = pci_get_drvdata( pdev ); |
| 453 | if( dev == NULL ) { |
| 454 | DBG_ERROR( DbgInfo, "Could not retrieve net_device structure\n" ); |
| 455 | return; |
| 456 | } |
| 457 | |
| 458 | /* Perform device cleanup */ |
| 459 | wl_remove( dev ); |
| 460 | free_irq( dev->irq, dev ); |
| 461 | |
| 462 | #ifdef ENABLE_DMA |
| 463 | wl_pci_dma_free( pdev, dev->priv ); |
| 464 | #endif |
| 465 | |
| 466 | wl_device_dealloc( dev ); |
| 467 | |
| 468 | DBG_LEAVE( DbgInfo ); |
| 469 | return; |
| 470 | } // wl_pci_remove |
| 471 | /*============================================================================*/ |
| 472 | |
| 473 | /******************************************************************************* |
| 474 | * wl_pci_setup() |
| 475 | ******************************************************************************* |
| 476 | * |
| 477 | * DESCRIPTION: |
| 478 | * |
| 479 | * Called by wl_pci_probe() to begin a device's initialization process. |
| 480 | * |
| 481 | * PARAMETERS: |
| 482 | * |
| 483 | * pdev - a pointer to the device's pci_dev structure |
| 484 | * |
| 485 | * RETURNS: |
| 486 | * |
| 487 | * 0 on success |
| 488 | * errno value otherwise |
| 489 | * |
| 490 | ******************************************************************************/ |
| 491 | int wl_pci_setup( struct pci_dev *pdev ) |
| 492 | { |
| 493 | int result = 0; |
| 494 | struct net_device *dev = NULL; |
| 495 | struct wl_private *lp = NULL; |
| 496 | /*------------------------------------------------------------------------*/ |
| 497 | |
| 498 | DBG_FUNC( "wl_pci_setup" ); |
| 499 | DBG_ENTER( DbgInfo ); |
| 500 | |
| 501 | /* Make sure the pci_dev pointer passed in is valid */ |
| 502 | if( pdev == NULL ) { |
| 503 | DBG_ERROR( DbgInfo, "PCI subsys passed in an invalid pci_dev pointer\n" ); |
| 504 | return -ENODEV; |
| 505 | } |
| 506 | |
| 507 | result = pci_enable_device( pdev ); |
| 508 | if( result != 0 ) { |
| 509 | DBG_ERROR( DbgInfo, "pci_enable_device() failed\n" ); |
| 510 | DBG_LEAVE( DbgInfo ); |
| 511 | return result; |
| 512 | } |
| 513 | |
| 514 | /* We found our device! Let's register it with the system */ |
| 515 | DBG_TRACE( DbgInfo, "Found our device, now registering\n" ); |
| 516 | dev = wl_device_alloc( ); |
| 517 | if( dev == NULL ) { |
| 518 | DBG_ERROR( DbgInfo, "Could not register device!!!\n" ); |
| 519 | DBG_LEAVE( DbgInfo ); |
| 520 | return -ENOMEM; |
| 521 | } |
| 522 | |
| 523 | /* Make sure that space was allocated for our private adapter struct */ |
| 524 | if( dev->priv == NULL ) { |
| 525 | DBG_ERROR( DbgInfo, "Private adapter struct was not allocated!!!\n" ); |
| 526 | wl_device_dealloc(dev); |
| 527 | DBG_LEAVE( DbgInfo ); |
| 528 | return -ENOMEM; |
| 529 | } |
| 530 | |
| 531 | #ifdef ENABLE_DMA |
| 532 | /* Allocate DMA Descriptors */ |
| 533 | if( wl_pci_dma_alloc( pdev, dev->priv ) < 0 ) { |
| 534 | DBG_ERROR( DbgInfo, "Could not allocate DMA descriptor memory!!!\n" ); |
| 535 | wl_device_dealloc(dev); |
| 536 | DBG_LEAVE( DbgInfo ); |
| 537 | return -ENOMEM; |
| 538 | } |
| 539 | #endif |
| 540 | |
| 541 | /* Register our private adapter structure with PCI */ |
| 542 | pci_set_drvdata( pdev, dev ); |
| 543 | |
| 544 | /* Fill out bus specific information in the net_device struct */ |
| 545 | dev->irq = pdev->irq; |
| 546 | SET_MODULE_OWNER( dev ); |
| 547 | |
| 548 | DBG_TRACE( DbgInfo, "Device Base Address: %#03lx\n", pdev->resource[0].start ); |
| 549 | dev->base_addr = pdev->resource[0].start; |
| 550 | |
| 551 | /* Initialize our device here */ |
| 552 | if( !wl_adapter_insert( dev )) { |
| 553 | DBG_ERROR( DbgInfo, "wl_adapter_insert() FAILED!!!\n" ); |
| 554 | wl_device_dealloc( dev ); |
| 555 | DBG_LEAVE( DbgInfo ); |
| 556 | return -EINVAL; |
| 557 | } |
| 558 | |
| 559 | /* Register our ISR */ |
| 560 | DBG_TRACE( DbgInfo, "Registering ISR...\n" ); |
| 561 | |
| 562 | result = request_irq(dev->irq, wl_isr, SA_SHIRQ, dev->name, dev); |
| 563 | if( result ) { |
| 564 | DBG_WARNING( DbgInfo, "Could not register ISR!!!\n" ); |
| 565 | wl_remove(dev); |
| 566 | wl_device_dealloc(dev); |
| 567 | DBG_LEAVE( DbgInfo ); |
| 568 | return result; |
| 569 | } |
| 570 | |
| 571 | /* Make sure interrupts are enabled properly for CardBus */ |
| 572 | lp = dev->priv; |
| 573 | |
| 574 | if( lp->hcfCtx.IFB_BusType == CFG_NIC_BUS_TYPE_CARDBUS || |
| 575 | lp->hcfCtx.IFB_BusType == CFG_NIC_BUS_TYPE_PCI ) { |
| 576 | DBG_TRACE( DbgInfo, "This is a PCI/CardBus card, enable interrupts\n" ); |
| 577 | wl_pci_enable_cardbus_interrupts( pdev ); |
| 578 | } |
| 579 | |
| 580 | /* Enable bus mastering */ |
| 581 | pci_set_master( pdev ); |
| 582 | |
| 583 | DBG_LEAVE( DbgInfo ); |
| 584 | return 0; |
| 585 | } // wl_pci_setup |
| 586 | /*============================================================================*/ |
| 587 | |
| 588 | /******************************************************************************* |
| 589 | * wl_pci_enable_cardbus_interrupts() |
| 590 | ******************************************************************************* |
| 591 | * |
| 592 | * DESCRIPTION: |
| 593 | * |
| 594 | * Called by wl_pci_setup() to enable interrupts on a CardBus device. This |
| 595 | * is done by writing bit 15 to the function event mask register. This |
| 596 | * CardBus-specific register is located in BAR2 (counting from BAR0), in memory |
| 597 | * space at byte offset 1f4 (7f4 for WARP). |
| 598 | * |
| 599 | * PARAMETERS: |
| 600 | * |
| 601 | * pdev - a pointer to the device's pci_dev structure |
| 602 | * |
| 603 | * RETURNS: |
| 604 | * |
| 605 | * N/A |
| 606 | * |
| 607 | ******************************************************************************/ |
| 608 | void wl_pci_enable_cardbus_interrupts( struct pci_dev *pdev ) |
| 609 | { |
| 610 | u32 bar2_reg; |
| 611 | u32 mem_addr_bus; |
| 612 | u32 func_evt_mask_reg; |
| 613 | void *mem_addr_kern = NULL; |
| 614 | /*------------------------------------------------------------------------*/ |
| 615 | |
| 616 | DBG_FUNC( "wl_pci_enable_cardbus_interrupts" ); |
| 617 | DBG_ENTER( DbgInfo ); |
| 618 | |
| 619 | /* Initialize to known bad values */ |
| 620 | bar2_reg = 0xdeadbeef; |
| 621 | mem_addr_bus = 0xdeadbeef; |
| 622 | |
| 623 | /* Read the BAR2 register; this register contains the base address of the |
| 624 | memory region where the function event mask register lives */ |
| 625 | pci_read_config_dword( pdev, PCI_BASE_ADDRESS_2, &bar2_reg ); |
| 626 | mem_addr_bus = bar2_reg & PCI_BASE_ADDRESS_MEM_MASK; |
| 627 | |
| 628 | /* Once the base address is obtained, remap the memory region to kernel |
| 629 | space so we can retrieve the register */ |
| 630 | mem_addr_kern = ioremap( mem_addr_bus, 0x200 ); |
| 631 | |
| 632 | #ifdef HERMES25 |
| 633 | #define REG_OFFSET 0x07F4 |
| 634 | #else |
| 635 | #define REG_OFFSET 0x01F4 |
| 636 | #endif // HERMES25 |
| 637 | |
| 638 | #define BIT15 0x8000 |
| 639 | |
| 640 | /* Retrieve the functional event mask register, enable interrupts by |
| 641 | setting Bit 15, and write back the value */ |
| 642 | func_evt_mask_reg = *(u32 *)( mem_addr_kern + REG_OFFSET ); |
| 643 | func_evt_mask_reg |= BIT15; |
| 644 | *(u32 *)( mem_addr_kern + REG_OFFSET ) = func_evt_mask_reg; |
| 645 | |
| 646 | /* Once complete, unmap the region and exit */ |
| 647 | iounmap( mem_addr_kern ); |
| 648 | |
| 649 | DBG_LEAVE( DbgInfo ); |
| 650 | return; |
| 651 | } // wl_pci_enable_cardbus_interrupts |
| 652 | /*============================================================================*/ |
| 653 | |
| 654 | #ifdef ENABLE_DMA |
| 655 | /******************************************************************************* |
| 656 | * wl_pci_dma_alloc() |
| 657 | ******************************************************************************* |
| 658 | * |
| 659 | * DESCRIPTION: |
| 660 | * |
| 661 | * Allocates all resources needed for PCI/CardBus DMA operation |
| 662 | * |
| 663 | * PARAMETERS: |
| 664 | * |
| 665 | * pdev - a pointer to the device's pci_dev structure |
| 666 | * lp - the device's private adapter structure |
| 667 | * |
| 668 | * RETURNS: |
| 669 | * |
| 670 | * 0 on success |
| 671 | * errno value otherwise |
| 672 | * |
| 673 | ******************************************************************************/ |
| 674 | int wl_pci_dma_alloc( struct pci_dev *pdev, struct wl_private *lp ) |
| 675 | { |
| 676 | int i; |
| 677 | int status = 0; |
| 678 | /*------------------------------------------------------------------------*/ |
| 679 | |
| 680 | DBG_FUNC( "wl_pci_dma_alloc" ); |
| 681 | DBG_ENTER( DbgInfo ); |
| 682 | |
| 683 | // lp->dma.tx_rsc_ind = lp->dma.rx_rsc_ind = 0; |
| 684 | // |
| 685 | // /* Alloc for the Tx chain and its reclaim descriptor */ |
| 686 | // for( i = 0; i < NUM_TX_DESC; i++ ) { |
| 687 | // status = wl_pci_dma_alloc_tx_packet( pdev, lp, &lp->dma.tx_packet[i] ); |
| 688 | // if( status == 0 ) { |
| 689 | // DBG_PRINT( "lp->dma.tx_packet[%d] : 0x%p\n", i, lp->dma.tx_packet[i] ); |
| 690 | // DBG_PRINT( "lp->dma.tx_packet[%d]->next_desc_addr : 0x%p\n", i, lp->dma.tx_packet[i]->next_desc_addr ); |
| 691 | // lp->dma.tx_rsc_ind++; |
| 692 | // } else { |
| 693 | // DBG_ERROR( DbgInfo, "Could not alloc DMA Tx Packet\n" ); |
| 694 | // break; |
| 695 | // } |
| 696 | // } |
| 697 | // if( status == 0 ) { |
| 698 | // status = wl_pci_dma_alloc_desc( pdev, lp, &lp->dma.tx_reclaim_desc ); |
| 699 | // DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc ); |
| 700 | // } |
| 701 | // /* Alloc for the Rx chain and its reclaim descriptor */ |
| 702 | // if( status == 0 ) { |
| 703 | // for( i = 0; i < NUM_RX_DESC; i++ ) { |
| 704 | // status = wl_pci_dma_alloc_rx_packet( pdev, lp, &lp->dma.rx_packet[i] ); |
| 705 | // if( status == 0 ) { |
| 706 | // DBG_PRINT( "lp->dma.rx_packet[%d] : 0x%p\n", i, lp->dma.rx_packet[i] ); |
| 707 | // DBG_PRINT( "lp->dma.rx_packet[%d]->next_desc_addr : 0x%p\n", i, lp->dma.rx_packet[i]->next_desc_addr ); |
| 708 | // lp->dma.rx_rsc_ind++; |
| 709 | // } else { |
| 710 | // DBG_ERROR( DbgInfo, "Could not alloc DMA Rx Packet\n" ); |
| 711 | // break; |
| 712 | // } |
| 713 | // } |
| 714 | // } |
| 715 | // if( status == 0 ) { |
| 716 | // status = wl_pci_dma_alloc_desc( pdev, lp, &lp->dma.rx_reclaim_desc ); |
| 717 | // DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc ); |
| 718 | // } |
| 719 | // /* Store status, as host should not call HCF functions if this fails */ |
| 720 | // lp->dma.status = status; //;?all useages of dma.status have been commented out |
| 721 | // DBG_LEAVE( DbgInfo ); |
| 722 | return status; |
| 723 | } // wl_pci_dma_alloc |
| 724 | /*============================================================================*/ |
| 725 | |
| 726 | /******************************************************************************* |
| 727 | * wl_pci_dma_free() |
| 728 | ******************************************************************************* |
| 729 | * |
| 730 | * DESCRIPTION: |
| 731 | * |
| 732 | * Deallocated all resources needed for PCI/CardBus DMA operation |
| 733 | * |
| 734 | * PARAMETERS: |
| 735 | * |
| 736 | * pdev - a pointer to the device's pci_dev structure |
| 737 | * lp - the device's private adapter structure |
| 738 | * |
| 739 | * RETURNS: |
| 740 | * |
| 741 | * 0 on success |
| 742 | * errno value otherwise |
| 743 | * |
| 744 | ******************************************************************************/ |
| 745 | int wl_pci_dma_free( struct pci_dev *pdev, struct wl_private *lp ) |
| 746 | { |
| 747 | int i; |
| 748 | int status = 0; |
| 749 | /*------------------------------------------------------------------------*/ |
| 750 | |
| 751 | DBG_FUNC( "wl_pci_dma_free" ); |
| 752 | DBG_ENTER( DbgInfo ); |
| 753 | |
| 754 | /* Reclaim all Rx packets that were handed over to the HCF */ |
| 755 | /* Do I need to do this? Before this free is called, I've already disabled |
| 756 | the port which will call wl_pci_dma_hcf_reclaim */ |
| 757 | //if( lp->dma.status == 0 ) |
| 758 | //{ |
| 759 | // wl_pci_dma_hcf_reclaim( lp ); |
| 760 | //} |
| 761 | |
| 762 | /* Free everything needed for DMA Rx */ |
| 763 | for( i = 0; i < NUM_RX_DESC; i++ ) { |
| 764 | if( lp->dma.rx_packet[i] ) { |
| 765 | status = wl_pci_dma_free_rx_packet( pdev, lp, &lp->dma.rx_packet[i] ); |
| 766 | if( status != 0 ) { |
| 767 | DBG_WARNING( DbgInfo, "Problem freeing Rx packet\n" ); |
| 768 | } |
| 769 | } |
| 770 | } |
| 771 | lp->dma.rx_rsc_ind = 0; |
| 772 | |
| 773 | if( lp->dma.rx_reclaim_desc ) { |
| 774 | status = wl_pci_dma_free_desc( pdev, lp, &lp->dma.rx_reclaim_desc ); |
| 775 | if( status != 0 ) { |
| 776 | DBG_WARNING( DbgInfo, "Problem freeing Rx reclaim descriptor\n" ); |
| 777 | } |
| 778 | } |
| 779 | |
| 780 | /* Free everything needed for DMA Tx */ |
| 781 | for( i = 0; i < NUM_TX_DESC; i++ ) { |
| 782 | if( lp->dma.tx_packet[i] ) { |
| 783 | status = wl_pci_dma_free_tx_packet( pdev, lp, &lp->dma.tx_packet[i] ); |
| 784 | if( status != 0 ) { |
| 785 | DBG_WARNING( DbgInfo, "Problem freeing Tx packet\n" ); |
| 786 | } |
| 787 | } |
| 788 | } |
| 789 | lp->dma.tx_rsc_ind = 0; |
| 790 | |
| 791 | if( lp->dma.tx_reclaim_desc ) { |
| 792 | status = wl_pci_dma_free_desc( pdev, lp, &lp->dma.tx_reclaim_desc ); |
| 793 | if( status != 0 ) { |
| 794 | DBG_WARNING( DbgInfo, "Problem freeing Tx reclaim descriptor\n" ); |
| 795 | } |
| 796 | } |
| 797 | |
| 798 | DBG_LEAVE( DbgInfo ); |
| 799 | return status; |
| 800 | } // wl_pci_dma_free |
| 801 | |
| 802 | /*============================================================================*/ |
| 803 | |
| 804 | /******************************************************************************* |
| 805 | * wl_pci_dma_alloc_tx_packet() |
| 806 | ******************************************************************************* |
| 807 | * |
| 808 | * DESCRIPTION: |
| 809 | * |
| 810 | * Allocates a single Tx packet, consisting of several descriptors and |
| 811 | * buffers. Data to transmit is first copied into the 'payload' buffer |
| 812 | * before being transmitted. |
| 813 | * |
| 814 | * PARAMETERS: |
| 815 | * |
| 816 | * pdev - a pointer to the device's pci_dev structure |
| 817 | * lp - the device's private adapter structure |
| 818 | * desc - a pointer which will reference the descriptor to be alloc'd. |
| 819 | * |
| 820 | * RETURNS: |
| 821 | * |
| 822 | * 0 on success |
| 823 | * errno value otherwise |
| 824 | * |
| 825 | ******************************************************************************/ |
| 826 | int wl_pci_dma_alloc_tx_packet( struct pci_dev *pdev, struct wl_private *lp, |
| 827 | DESC_STRCT **desc ) |
| 828 | { |
| 829 | // int status = 0; |
| 830 | // /*------------------------------------------------------------------------*/ |
| 831 | // |
| 832 | // if( desc == NULL ) { |
| 833 | // status = -EFAULT; |
| 834 | // } |
| 835 | // if( status == 0 ) { |
| 836 | // status = wl_pci_dma_alloc_desc_and_buf( pdev, lp, desc, |
| 837 | // HCF_DMA_TX_BUF1_SIZE ); |
| 838 | // |
| 839 | // if( status == 0 ) { |
| 840 | // status = wl_pci_dma_alloc_desc_and_buf( pdev, lp, |
| 841 | // &( (*desc)->next_desc_addr ), |
| 842 | // HCF_MAX_PACKET_SIZE ); |
| 843 | // } |
| 844 | // } |
| 845 | // if( status == 0 ) { |
| 846 | // (*desc)->next_desc_phys_addr = (*desc)->next_desc_addr->desc_phys_addr; |
| 847 | // } |
| 848 | // return status; |
| 849 | } // wl_pci_dma_alloc_tx_packet |
| 850 | /*============================================================================*/ |
| 851 | |
| 852 | /******************************************************************************* |
| 853 | * wl_pci_dma_free_tx_packet() |
| 854 | ******************************************************************************* |
| 855 | * |
| 856 | * DESCRIPTION: |
| 857 | * |
| 858 | * Frees a single Tx packet, described in the corresponding alloc function. |
| 859 | * |
| 860 | * PARAMETERS: |
| 861 | * |
| 862 | * pdev - a pointer to the device's pci_dev structure |
| 863 | * lp - the device's private adapter structure |
| 864 | * desc - a pointer which will reference the descriptor to be alloc'd. |
| 865 | * |
| 866 | * RETURNS: |
| 867 | * |
| 868 | * 0 on success |
| 869 | * errno value otherwise |
| 870 | * |
| 871 | ******************************************************************************/ |
| 872 | int wl_pci_dma_free_tx_packet( struct pci_dev *pdev, struct wl_private *lp, |
| 873 | DESC_STRCT **desc ) |
| 874 | { |
| 875 | int status = 0; |
| 876 | /*------------------------------------------------------------------------*/ |
| 877 | |
| 878 | if( *desc == NULL ) { |
| 879 | DBG_PRINT( "Null descriptor\n" ); |
| 880 | status = -EFAULT; |
| 881 | } |
| 882 | //;?the "limited" NDIS strategy, assuming a frame consists ALWAYS out of 2 |
| 883 | //descriptors, make this robust |
| 884 | if( status == 0 && (*desc)->next_desc_addr ) { |
| 885 | status = wl_pci_dma_free_desc_and_buf( pdev, lp, &(*desc)->next_desc_addr ); |
| 886 | } |
| 887 | if( status == 0 ) { |
| 888 | status = wl_pci_dma_free_desc_and_buf( pdev, lp, desc ); |
| 889 | } |
| 890 | return status; |
| 891 | } // wl_pci_dma_free_tx_packet |
| 892 | /*============================================================================*/ |
| 893 | |
| 894 | /******************************************************************************* |
| 895 | * wl_pci_dma_alloc_rx_packet() |
| 896 | ******************************************************************************* |
| 897 | * |
| 898 | * DESCRIPTION: |
| 899 | * |
| 900 | * Allocates a single Rx packet, consisting of two descriptors and one |
| 901 | * contiguous buffer. The buffer starts with the hermes-specific header. |
| 902 | * One descriptor points at the start, the other at offset 0x3a of the |
| 903 | * buffer. |
| 904 | * |
| 905 | * PARAMETERS: |
| 906 | * |
| 907 | * pdev - a pointer to the device's pci_dev structure |
| 908 | * lp - the device's private adapter structure |
| 909 | * desc - a pointer which will reference the descriptor to be alloc'd. |
| 910 | * |
| 911 | * RETURNS: |
| 912 | * |
| 913 | * 0 on success |
| 914 | * errno value otherwise |
| 915 | * |
| 916 | ******************************************************************************/ |
| 917 | int wl_pci_dma_alloc_rx_packet( struct pci_dev *pdev, struct wl_private *lp, |
| 918 | DESC_STRCT **desc ) |
| 919 | { |
| 920 | int status = 0; |
| 921 | DESC_STRCT *p; |
| 922 | /*------------------------------------------------------------------------*/ |
| 923 | |
| 924 | // if( desc == NULL ) { |
| 925 | // status = -EFAULT; |
| 926 | // } |
| 927 | // //;?the "limited" NDIS strategy, assuming a frame consists ALWAYS out of 2 |
| 928 | // //descriptors, make this robust |
| 929 | // if( status == 0 ) { |
| 930 | // status = wl_pci_dma_alloc_desc( pdev, lp, desc ); |
| 931 | // } |
| 932 | // if( status == 0 ) { |
| 933 | // status = wl_pci_dma_alloc_buf( pdev, lp, *desc, HCF_MAX_PACKET_SIZE ); |
| 934 | // } |
| 935 | // if( status == 0 ) { |
| 936 | // status = wl_pci_dma_alloc_desc( pdev, lp, &p ); |
| 937 | // } |
| 938 | // if( status == 0 ) { |
| 939 | // /* Size of 1st descriptor becomes 0x3a bytes */ |
| 940 | // SET_BUF_SIZE( *desc, HCF_DMA_RX_BUF1_SIZE ); |
| 941 | // |
| 942 | // /* Make 2nd descriptor point at offset 0x3a of the buffer */ |
| 943 | // SET_BUF_SIZE( p, ( HCF_MAX_PACKET_SIZE - HCF_DMA_RX_BUF1_SIZE )); |
| 944 | // p->buf_addr = (*desc)->buf_addr + HCF_DMA_RX_BUF1_SIZE; |
| 945 | // p->buf_phys_addr = (*desc)->buf_phys_addr + HCF_DMA_RX_BUF1_SIZE; |
| 946 | // p->next_desc_addr = NULL; |
| 947 | // |
| 948 | // /* Chain 2nd descriptor to 1st descriptor */ |
| 949 | // (*desc)->next_desc_addr = p; |
| 950 | // (*desc)->next_desc_phys_addr = p->desc_phys_addr; |
| 951 | // } |
| 952 | |
| 953 | return status; |
| 954 | } // wl_pci_dma_alloc_rx_packet |
| 955 | /*============================================================================*/ |
| 956 | |
| 957 | /******************************************************************************* |
| 958 | * wl_pci_dma_free_rx_packet() |
| 959 | ******************************************************************************* |
| 960 | * |
| 961 | * DESCRIPTION: |
| 962 | * |
| 963 | * Frees a single Rx packet, described in the corresponding alloc function. |
| 964 | * |
| 965 | * PARAMETERS: |
| 966 | * |
| 967 | * pdev - a pointer to the device's pci_dev structure |
| 968 | * lp - the device's private adapter structure |
| 969 | * desc - a pointer which will reference the descriptor to be alloc'd. |
| 970 | * |
| 971 | * RETURNS: |
| 972 | * |
| 973 | * 0 on success |
| 974 | * errno value otherwise |
| 975 | * |
| 976 | ******************************************************************************/ |
| 977 | int wl_pci_dma_free_rx_packet( struct pci_dev *pdev, struct wl_private *lp, |
| 978 | DESC_STRCT **desc ) |
| 979 | { |
| 980 | int status = 0; |
| 981 | DESC_STRCT *p; |
| 982 | /*------------------------------------------------------------------------*/ |
| 983 | |
| 984 | if( *desc == NULL ) { |
| 985 | status = -EFAULT; |
| 986 | } |
| 987 | if( status == 0 ) { |
| 988 | p = (*desc)->next_desc_addr; |
| 989 | |
| 990 | /* Free the 2nd descriptor */ |
| 991 | if( p != NULL ) { |
| 992 | p->buf_addr = NULL; |
| 993 | p->buf_phys_addr = 0; |
| 994 | |
| 995 | status = wl_pci_dma_free_desc( pdev, lp, &p ); |
| 996 | } |
| 997 | } |
| 998 | |
| 999 | /* Free the buffer and 1st descriptor */ |
| 1000 | if( status == 0 ) { |
| 1001 | SET_BUF_SIZE( *desc, HCF_MAX_PACKET_SIZE ); |
| 1002 | status = wl_pci_dma_free_desc_and_buf( pdev, lp, desc ); |
| 1003 | } |
| 1004 | return status; |
| 1005 | } // wl_pci_dma_free_rx_packet |
| 1006 | /*============================================================================*/ |
| 1007 | |
| 1008 | /******************************************************************************* |
| 1009 | * wl_pci_dma_alloc_desc_and_buf() |
| 1010 | ******************************************************************************* |
| 1011 | * |
| 1012 | * DESCRIPTION: |
| 1013 | * |
| 1014 | * Allocates a DMA descriptor and buffer, and associates them with one |
| 1015 | * another. |
| 1016 | * |
| 1017 | * PARAMETERS: |
| 1018 | * |
| 1019 | * pdev - a pointer to the device's pci_dev structure |
| 1020 | * lp - the device's private adapter structure |
| 1021 | * desc - a pointer which will reference the descriptor to be alloc'd |
| 1022 | * |
| 1023 | * RETURNS: |
| 1024 | * |
| 1025 | * 0 on success |
| 1026 | * errno value otherwise |
| 1027 | * |
| 1028 | ******************************************************************************/ |
| 1029 | int wl_pci_dma_alloc_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp, |
| 1030 | DESC_STRCT **desc, int size ) |
| 1031 | { |
| 1032 | int status = 0; |
| 1033 | /*------------------------------------------------------------------------*/ |
| 1034 | |
| 1035 | // if( desc == NULL ) { |
| 1036 | // status = -EFAULT; |
| 1037 | // } |
| 1038 | // if( status == 0 ) { |
| 1039 | // status = wl_pci_dma_alloc_desc( pdev, lp, desc ); |
| 1040 | // |
| 1041 | // if( status == 0 ) { |
| 1042 | // status = wl_pci_dma_alloc_buf( pdev, lp, *desc, size ); |
| 1043 | // } |
| 1044 | // } |
| 1045 | return status; |
| 1046 | } // wl_pci_dma_alloc_desc_and_buf |
| 1047 | /*============================================================================*/ |
| 1048 | |
| 1049 | /******************************************************************************* |
| 1050 | * wl_pci_dma_free_desc_and_buf() |
| 1051 | ******************************************************************************* |
| 1052 | * |
| 1053 | * DESCRIPTION: |
| 1054 | * |
| 1055 | * Frees a DMA descriptor and associated buffer. |
| 1056 | * |
| 1057 | * PARAMETERS: |
| 1058 | * |
| 1059 | * pdev - a pointer to the device's pci_dev structure |
| 1060 | * lp - the device's private adapter structure |
| 1061 | * desc - a pointer which will reference the descriptor to be alloc'd |
| 1062 | * |
| 1063 | * RETURNS: |
| 1064 | * |
| 1065 | * 0 on success |
| 1066 | * errno value otherwise |
| 1067 | * |
| 1068 | ******************************************************************************/ |
| 1069 | int wl_pci_dma_free_desc_and_buf( struct pci_dev *pdev, struct wl_private *lp, |
| 1070 | DESC_STRCT **desc ) |
| 1071 | { |
| 1072 | int status = 0; |
| 1073 | /*------------------------------------------------------------------------*/ |
| 1074 | |
| 1075 | if( desc == NULL ) { |
| 1076 | status = -EFAULT; |
| 1077 | } |
| 1078 | if( status == 0 && *desc == NULL ) { |
| 1079 | status = -EFAULT; |
| 1080 | } |
| 1081 | if( status == 0 ) { |
| 1082 | status = wl_pci_dma_free_buf( pdev, lp, *desc ); |
| 1083 | |
| 1084 | if( status == 0 ) { |
| 1085 | status = wl_pci_dma_free_desc( pdev, lp, desc ); |
| 1086 | } |
| 1087 | } |
| 1088 | return status; |
| 1089 | } // wl_pci_dma_free_desc_and_buf |
| 1090 | /*============================================================================*/ |
| 1091 | |
| 1092 | /******************************************************************************* |
| 1093 | * wl_pci_dma_alloc_desc() |
| 1094 | ******************************************************************************* |
| 1095 | * |
| 1096 | * DESCRIPTION: |
| 1097 | * |
| 1098 | * Allocates one DMA descriptor in cache coherent memory. |
| 1099 | * |
| 1100 | * PARAMETERS: |
| 1101 | * |
| 1102 | * pdev - a pointer to the device's pci_dev structure |
| 1103 | * lp - the device's private adapter structure |
| 1104 | * |
| 1105 | * RETURNS: |
| 1106 | * |
| 1107 | * 0 on success |
| 1108 | * errno value otherwise |
| 1109 | * |
| 1110 | ******************************************************************************/ |
| 1111 | int wl_pci_dma_alloc_desc( struct pci_dev *pdev, struct wl_private *lp, |
| 1112 | DESC_STRCT **desc ) |
| 1113 | { |
| 1114 | // int status = 0; |
| 1115 | // dma_addr_t pa; |
| 1116 | // /*------------------------------------------------------------------------*/ |
| 1117 | // |
| 1118 | // DBG_FUNC( "wl_pci_dma_alloc_desc" ); |
| 1119 | // DBG_ENTER( DbgInfo ); |
| 1120 | // |
| 1121 | // if( desc == NULL ) { |
| 1122 | // status = -EFAULT; |
| 1123 | // } |
| 1124 | // if( status == 0 ) { |
| 1125 | // *desc = pci_alloc_consistent( pdev, sizeof( DESC_STRCT ), &pa ); |
| 1126 | // } |
| 1127 | // if( *desc == NULL ) { |
| 1128 | // DBG_ERROR( DbgInfo, "pci_alloc_consistent() failed\n" ); |
| 1129 | // status = -ENOMEM; |
| 1130 | // } else { |
| 1131 | // memset( *desc, 0, sizeof( DESC_STRCT )); |
| 1132 | // (*desc)->desc_phys_addr = cpu_to_le32( pa ); |
| 1133 | // } |
| 1134 | // DBG_LEAVE( DbgInfo ); |
| 1135 | // return status; |
| 1136 | } // wl_pci_dma_alloc_desc |
| 1137 | /*============================================================================*/ |
| 1138 | |
| 1139 | /******************************************************************************* |
| 1140 | * wl_pci_dma_free_desc() |
| 1141 | ******************************************************************************* |
| 1142 | * |
| 1143 | * DESCRIPTION: |
| 1144 | * |
| 1145 | * Frees one DMA descriptor in cache coherent memory. |
| 1146 | * |
| 1147 | * PARAMETERS: |
| 1148 | * |
| 1149 | * pdev - a pointer to the device's pci_dev structure |
| 1150 | * lp - the device's private adapter structure |
| 1151 | * |
| 1152 | * RETURNS: |
| 1153 | * |
| 1154 | * 0 on success |
| 1155 | * errno value otherwise |
| 1156 | * |
| 1157 | ******************************************************************************/ |
| 1158 | int wl_pci_dma_free_desc( struct pci_dev *pdev, struct wl_private *lp, |
| 1159 | DESC_STRCT **desc ) |
| 1160 | { |
| 1161 | int status = 0; |
| 1162 | /*------------------------------------------------------------------------*/ |
| 1163 | |
| 1164 | if( *desc == NULL ) { |
| 1165 | status = -EFAULT; |
| 1166 | } |
| 1167 | if( status == 0 ) { |
| 1168 | pci_free_consistent( pdev, sizeof( DESC_STRCT ), *desc, |
| 1169 | (*desc)->desc_phys_addr ); |
| 1170 | } |
| 1171 | *desc = NULL; |
| 1172 | return status; |
| 1173 | } // wl_pci_dma_free_desc |
| 1174 | /*============================================================================*/ |
| 1175 | |
| 1176 | /******************************************************************************* |
| 1177 | * wl_pci_dma_alloc_buf() |
| 1178 | ******************************************************************************* |
| 1179 | * |
| 1180 | * DESCRIPTION: |
| 1181 | * |
| 1182 | * Allocates one DMA buffer in cache coherent memory, and associates a DMA |
| 1183 | * descriptor with this buffer. |
| 1184 | * |
| 1185 | * PARAMETERS: |
| 1186 | * |
| 1187 | * pdev - a pointer to the device's pci_dev structure |
| 1188 | * lp - the device's private adapter structure |
| 1189 | * |
| 1190 | * RETURNS: |
| 1191 | * |
| 1192 | * 0 on success |
| 1193 | * errno value otherwise |
| 1194 | * |
| 1195 | ******************************************************************************/ |
| 1196 | int wl_pci_dma_alloc_buf( struct pci_dev *pdev, struct wl_private *lp, |
| 1197 | DESC_STRCT *desc, int size ) |
| 1198 | { |
| 1199 | int status = 0; |
| 1200 | dma_addr_t pa; |
| 1201 | /*------------------------------------------------------------------------*/ |
| 1202 | |
| 1203 | // DBG_FUNC( "wl_pci_dma_alloc_buf" ); |
| 1204 | // DBG_ENTER( DbgInfo ); |
| 1205 | // |
| 1206 | // if( desc == NULL ) { |
| 1207 | // status = -EFAULT; |
| 1208 | // } |
| 1209 | // if( status == 0 && desc->buf_addr != NULL ) { |
| 1210 | // status = -EFAULT; |
| 1211 | // } |
| 1212 | // if( status == 0 ) { |
| 1213 | // desc->buf_addr = pci_alloc_consistent( pdev, size, &pa ); |
| 1214 | // } |
| 1215 | // if( desc->buf_addr == NULL ) { |
| 1216 | // DBG_ERROR( DbgInfo, "pci_alloc_consistent() failed\n" ); |
| 1217 | // status = -ENOMEM; |
| 1218 | // } else { |
| 1219 | // desc->buf_phys_addr = cpu_to_le32( pa ); |
| 1220 | // SET_BUF_SIZE( desc, size ); |
| 1221 | // } |
| 1222 | // DBG_LEAVE( DbgInfo ); |
| 1223 | return status; |
| 1224 | } // wl_pci_dma_alloc_buf |
| 1225 | /*============================================================================*/ |
| 1226 | |
| 1227 | /******************************************************************************* |
| 1228 | * wl_pci_dma_free_buf() |
| 1229 | ******************************************************************************* |
| 1230 | * |
| 1231 | * DESCRIPTION: |
| 1232 | * |
| 1233 | * Allocates one DMA buffer in cache coherent memory, and associates a DMA |
| 1234 | * descriptor with this buffer. |
| 1235 | * |
| 1236 | * PARAMETERS: |
| 1237 | * |
| 1238 | * pdev - a pointer to the device's pci_dev structure |
| 1239 | * lp - the device's private adapter structure |
| 1240 | * |
| 1241 | * RETURNS: |
| 1242 | * |
| 1243 | * 0 on success |
| 1244 | * errno value otherwise |
| 1245 | * |
| 1246 | ******************************************************************************/ |
| 1247 | int wl_pci_dma_free_buf( struct pci_dev *pdev, struct wl_private *lp, |
| 1248 | DESC_STRCT *desc ) |
| 1249 | { |
| 1250 | int status = 0; |
| 1251 | /*------------------------------------------------------------------------*/ |
| 1252 | |
| 1253 | if( desc == NULL ) { |
| 1254 | status = -EFAULT; |
| 1255 | } |
| 1256 | if( status == 0 && desc->buf_addr == NULL ) { |
| 1257 | status = -EFAULT; |
| 1258 | } |
| 1259 | if( status == 0 ) { |
| 1260 | pci_free_consistent( pdev, GET_BUF_SIZE( desc ), desc->buf_addr, |
| 1261 | desc->buf_phys_addr ); |
| 1262 | |
| 1263 | desc->buf_addr = 0; |
| 1264 | desc->buf_phys_addr = 0; |
| 1265 | SET_BUF_SIZE( desc, 0 ); |
| 1266 | } |
| 1267 | return status; |
| 1268 | } // wl_pci_dma_free_buf |
| 1269 | /*============================================================================*/ |
| 1270 | |
| 1271 | /******************************************************************************* |
| 1272 | * wl_pci_dma_hcf_supply() |
| 1273 | ******************************************************************************* |
| 1274 | * |
| 1275 | * DESCRIPTION: |
| 1276 | * |
| 1277 | * Supply HCF with DMA-related resources. These consist of: |
| 1278 | * - buffers and descriptors for receive purposes |
| 1279 | * - one 'reclaim' descriptor for the transmit path, used to fulfill a |
| 1280 | * certain H25 DMA engine requirement |
| 1281 | * - one 'reclaim' descriptor for the receive path, used to fulfill a |
| 1282 | * certain H25 DMA engine requirement |
| 1283 | * |
| 1284 | * This function is called at start-of-day or at re-initialization. |
| 1285 | * |
| 1286 | * PARAMETERS: |
| 1287 | * |
| 1288 | * lp - the device's private adapter structure |
| 1289 | * |
| 1290 | * RETURNS: |
| 1291 | * |
| 1292 | * 0 on success |
| 1293 | * errno value otherwise |
| 1294 | * |
| 1295 | ******************************************************************************/ |
| 1296 | void wl_pci_dma_hcf_supply( struct wl_private *lp ) |
| 1297 | { |
| 1298 | int i; |
| 1299 | /*------------------------------------------------------------------------*/ |
| 1300 | |
| 1301 | DBG_FUNC( "wl_pci_dma_hcf_supply" ); |
| 1302 | DBG_ENTER( DbgInfo ); |
| 1303 | |
| 1304 | //if( lp->dma.status == 0 ); |
| 1305 | //{ |
| 1306 | /* Hand over the Rx/Tx reclaim descriptors to the HCF */ |
| 1307 | if( lp->dma.tx_reclaim_desc ) { |
| 1308 | DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc ); |
| 1309 | hcf_dma_tx_put( &lp->hcfCtx, lp->dma.tx_reclaim_desc, 0 ); |
| 1310 | lp->dma.tx_reclaim_desc = NULL; |
| 1311 | DBG_PRINT( "lp->dma.tx_reclaim_desc: 0x%p\n", lp->dma.tx_reclaim_desc ); |
| 1312 | } |
| 1313 | if( lp->dma.rx_reclaim_desc ) { |
| 1314 | DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc ); |
| 1315 | hcf_dma_rx_put( &lp->hcfCtx, lp->dma.rx_reclaim_desc ); |
| 1316 | lp->dma.rx_reclaim_desc = NULL; |
| 1317 | DBG_PRINT( "lp->dma.rx_reclaim_desc: 0x%p\n", lp->dma.rx_reclaim_desc ); |
| 1318 | } |
| 1319 | /* Hand over the Rx descriptor chain to the HCF */ |
| 1320 | for( i = 0; i < NUM_RX_DESC; i++ ) { |
| 1321 | DBG_PRINT( "lp->dma.rx_packet[%d]: 0x%p\n", i, lp->dma.rx_packet[i] ); |
| 1322 | hcf_dma_rx_put( &lp->hcfCtx, lp->dma.rx_packet[i] ); |
| 1323 | lp->dma.rx_packet[i] = NULL; |
| 1324 | DBG_PRINT( "lp->dma.rx_packet[%d]: 0x%p\n", i, lp->dma.rx_packet[i] ); |
| 1325 | } |
| 1326 | //} |
| 1327 | |
| 1328 | DBG_LEAVE( DbgInfo ); |
| 1329 | return; |
| 1330 | } // wl_pci_dma_hcf_supply |
| 1331 | /*============================================================================*/ |
| 1332 | |
| 1333 | /******************************************************************************* |
| 1334 | * wl_pci_dma_hcf_reclaim() |
| 1335 | ******************************************************************************* |
| 1336 | * |
| 1337 | * DESCRIPTION: |
| 1338 | * |
| 1339 | * Return DMA-related resources from the HCF. These consist of: |
| 1340 | * - buffers and descriptors for receive purposes |
| 1341 | * - buffers and descriptors for transmit purposes |
| 1342 | * - one 'reclaim' descriptor for the transmit path, used to fulfill a |
| 1343 | * certain H25 DMA engine requirement |
| 1344 | * - one 'reclaim' descriptor for the receive path, used to fulfill a |
| 1345 | * certain H25 DMA engine requirement |
| 1346 | * |
| 1347 | * This function is called at end-of-day or at re-initialization. |
| 1348 | * |
| 1349 | * PARAMETERS: |
| 1350 | * |
| 1351 | * lp - the device's private adapter structure |
| 1352 | * |
| 1353 | * RETURNS: |
| 1354 | * |
| 1355 | * 0 on success |
| 1356 | * errno value otherwise |
| 1357 | * |
| 1358 | ******************************************************************************/ |
| 1359 | void wl_pci_dma_hcf_reclaim( struct wl_private *lp ) |
| 1360 | { |
| 1361 | int i; |
| 1362 | /*------------------------------------------------------------------------*/ |
| 1363 | |
| 1364 | DBG_FUNC( "wl_pci_dma_hcf_reclaim" ); |
| 1365 | DBG_ENTER( DbgInfo ); |
| 1366 | |
| 1367 | wl_pci_dma_hcf_reclaim_rx( lp ); |
| 1368 | for( i = 0; i < NUM_RX_DESC; i++ ) { |
| 1369 | DBG_PRINT( "rx_packet[%d] 0x%p\n", i, lp->dma.rx_packet[i] ); |
| 1370 | // if( lp->dma.rx_packet[i] == NULL ) { |
| 1371 | // DBG_PRINT( "wl_pci_dma_hcf_reclaim: rx_packet[%d] NULL\n", i ); |
| 1372 | // } |
| 1373 | } |
| 1374 | |
| 1375 | wl_pci_dma_hcf_reclaim_tx( lp ); |
| 1376 | for( i = 0; i < NUM_TX_DESC; i++ ) { |
| 1377 | DBG_PRINT( "tx_packet[%d] 0x%p\n", i, lp->dma.tx_packet[i] ); |
| 1378 | // if( lp->dma.tx_packet[i] == NULL ) { |
| 1379 | // DBG_PRINT( "wl_pci_dma_hcf_reclaim: tx_packet[%d] NULL\n", i ); |
| 1380 | // } |
| 1381 | } |
| 1382 | |
| 1383 | DBG_LEAVE( DbgInfo ); |
| 1384 | return; |
| 1385 | } // wl_pci_dma_hcf_reclaim |
| 1386 | /*============================================================================*/ |
| 1387 | |
| 1388 | /******************************************************************************* |
| 1389 | * wl_pci_dma_hcf_reclaim_rx() |
| 1390 | ******************************************************************************* |
| 1391 | * |
| 1392 | * DESCRIPTION: |
| 1393 | * |
| 1394 | * Reclaim Rx packets that have already been processed by the HCF. |
| 1395 | * |
| 1396 | * PARAMETERS: |
| 1397 | * |
| 1398 | * lp - the device's private adapter structure |
| 1399 | * |
| 1400 | * RETURNS: |
| 1401 | * |
| 1402 | * 0 on success |
| 1403 | * errno value otherwise |
| 1404 | * |
| 1405 | ******************************************************************************/ |
| 1406 | void wl_pci_dma_hcf_reclaim_rx( struct wl_private *lp ) |
| 1407 | { |
| 1408 | int i; |
| 1409 | DESC_STRCT *p; |
| 1410 | /*------------------------------------------------------------------------*/ |
| 1411 | |
| 1412 | DBG_FUNC( "wl_pci_dma_hcf_reclaim_rx" ); |
| 1413 | DBG_ENTER( DbgInfo ); |
| 1414 | |
| 1415 | //if( lp->dma.status == 0 ) |
| 1416 | //{ |
| 1417 | while ( ( p = hcf_dma_rx_get( &lp->hcfCtx ) ) != NULL ) { |
| 1418 | if( p && p->buf_addr == NULL ) { |
| 1419 | /* A reclaim descriptor is being given back by the HCF. Reclaim |
| 1420 | descriptors have a NULL buf_addr */ |
| 1421 | lp->dma.rx_reclaim_desc = p; |
| 1422 | DBG_PRINT( "reclaim_descriptor: 0x%p\n", p ); |
| 1423 | continue; |
| 1424 | } |
| 1425 | for( i = 0; i < NUM_RX_DESC; i++ ) { |
| 1426 | if( lp->dma.rx_packet[i] == NULL ) { |
| 1427 | break; |
| 1428 | } |
| 1429 | } |
| 1430 | /* An Rx buffer descriptor is being given back by the HCF */ |
| 1431 | lp->dma.rx_packet[i] = p; |
| 1432 | lp->dma.rx_rsc_ind++; |
| 1433 | DBG_PRINT( "rx_packet[%d] 0x%p\n", i, lp->dma.rx_packet[i] ); |
| 1434 | } |
| 1435 | //} |
| 1436 | DBG_LEAVE( DbgInfo ); |
| 1437 | } // wl_pci_dma_hcf_reclaim_rx |
| 1438 | /*============================================================================*/ |
| 1439 | |
| 1440 | /******************************************************************************* |
| 1441 | * wl_pci_dma_get_tx_packet() |
| 1442 | ******************************************************************************* |
| 1443 | * |
| 1444 | * DESCRIPTION: |
| 1445 | * |
| 1446 | * Obtains a Tx descriptor from the chain to use for Tx. |
| 1447 | * |
| 1448 | * PARAMETERS: |
| 1449 | * |
| 1450 | * lp - a pointer to the device's wl_private structure. |
| 1451 | * |
| 1452 | * RETURNS: |
| 1453 | * |
| 1454 | * A pointer to the retrieved descriptor |
| 1455 | * |
| 1456 | ******************************************************************************/ |
| 1457 | DESC_STRCT * wl_pci_dma_get_tx_packet( struct wl_private *lp ) |
| 1458 | { |
| 1459 | int i; |
| 1460 | DESC_STRCT *desc = NULL; |
| 1461 | /*------------------------------------------------------------------------*/ |
| 1462 | |
| 1463 | for( i = 0; i < NUM_TX_DESC; i++ ) { |
| 1464 | if( lp->dma.tx_packet[i] ) { |
| 1465 | break; |
| 1466 | } |
| 1467 | } |
| 1468 | |
| 1469 | if( i != NUM_TX_DESC ) { |
| 1470 | desc = lp->dma.tx_packet[i]; |
| 1471 | |
| 1472 | lp->dma.tx_packet[i] = NULL; |
| 1473 | lp->dma.tx_rsc_ind--; |
| 1474 | |
| 1475 | memset( desc->buf_addr, 0, HCF_DMA_TX_BUF1_SIZE ); |
| 1476 | } |
| 1477 | |
| 1478 | return desc; |
| 1479 | } // wl_pci_dma_get_tx_packet |
| 1480 | /*============================================================================*/ |
| 1481 | |
| 1482 | /******************************************************************************* |
| 1483 | * wl_pci_dma_put_tx_packet() |
| 1484 | ******************************************************************************* |
| 1485 | * |
| 1486 | * DESCRIPTION: |
| 1487 | * |
| 1488 | * Returns a Tx descriptor to the chain. |
| 1489 | * |
| 1490 | * PARAMETERS: |
| 1491 | * |
| 1492 | * lp - a pointer to the device's wl_private structure. |
| 1493 | * desc - a pointer to the descriptor to return. |
| 1494 | * |
| 1495 | * RETURNS: |
| 1496 | * |
| 1497 | * N/A |
| 1498 | * |
| 1499 | ******************************************************************************/ |
| 1500 | void wl_pci_dma_put_tx_packet( struct wl_private *lp, DESC_STRCT *desc ) |
| 1501 | { |
| 1502 | int i; |
| 1503 | /*------------------------------------------------------------------------*/ |
| 1504 | |
| 1505 | for( i = 0; i < NUM_TX_DESC; i++ ) { |
| 1506 | if( lp->dma.tx_packet[i] == NULL ) { |
| 1507 | break; |
| 1508 | } |
| 1509 | } |
| 1510 | |
| 1511 | if( i != NUM_TX_DESC ) { |
| 1512 | lp->dma.tx_packet[i] = desc; |
| 1513 | lp->dma.tx_rsc_ind++; |
| 1514 | } |
| 1515 | } // wl_pci_dma_put_tx_packet |
| 1516 | /*============================================================================*/ |
| 1517 | |
| 1518 | /******************************************************************************* |
| 1519 | * wl_pci_dma_hcf_reclaim_tx() |
| 1520 | ******************************************************************************* |
| 1521 | * |
| 1522 | * DESCRIPTION: |
| 1523 | * |
| 1524 | * Reclaim Tx packets that have either been processed by the HCF due to a |
| 1525 | * port disable or a Tx completion. |
| 1526 | * |
| 1527 | * PARAMETERS: |
| 1528 | * |
| 1529 | * lp - the device's private adapter structure |
| 1530 | * |
| 1531 | * RETURNS: |
| 1532 | * |
| 1533 | * 0 on success |
| 1534 | * errno value otherwise |
| 1535 | * |
| 1536 | ******************************************************************************/ |
| 1537 | void wl_pci_dma_hcf_reclaim_tx( struct wl_private *lp ) |
| 1538 | { |
| 1539 | int i; |
| 1540 | DESC_STRCT *p; |
| 1541 | /*------------------------------------------------------------------------*/ |
| 1542 | |
| 1543 | DBG_FUNC( "wl_pci_dma_hcf_reclaim_tx" ); |
| 1544 | DBG_ENTER( DbgInfo ); |
| 1545 | |
| 1546 | //if( lp->dma.status == 0 ) |
| 1547 | //{ |
| 1548 | while ( ( p = hcf_dma_tx_get( &lp->hcfCtx ) ) != NULL ) { |
| 1549 | |
| 1550 | if( p != NULL && p->buf_addr == NULL ) { |
| 1551 | /* A Reclaim descriptor is being given back by the HCF. Reclaim |
| 1552 | descriptors have a NULL buf_addr */ |
| 1553 | lp->dma.tx_reclaim_desc = p; |
| 1554 | DBG_PRINT( "reclaim_descriptor: 0x%p\n", p ); |
| 1555 | continue; |
| 1556 | } |
| 1557 | for( i = 0; i < NUM_TX_DESC; i++ ) { |
| 1558 | if( lp->dma.tx_packet[i] == NULL ) { |
| 1559 | break; |
| 1560 | } |
| 1561 | } |
| 1562 | /* An Rx buffer descriptor is being given back by the HCF */ |
| 1563 | lp->dma.tx_packet[i] = p; |
| 1564 | lp->dma.tx_rsc_ind++; |
| 1565 | DBG_PRINT( "tx_packet[%d] 0x%p\n", i, lp->dma.tx_packet[i] ); |
| 1566 | } |
| 1567 | //} |
| 1568 | |
| 1569 | if( lp->netif_queue_on == FALSE ) { |
| 1570 | netif_wake_queue( lp->dev ); |
| 1571 | WL_WDS_NETIF_WAKE_QUEUE( lp ); |
| 1572 | lp->netif_queue_on = TRUE; |
| 1573 | } |
| 1574 | DBG_LEAVE( DbgInfo ); |
| 1575 | return; |
| 1576 | } // wl_pci_dma_hcf_reclaim_tx |
| 1577 | /*============================================================================*/ |
| 1578 | #endif // ENABLE_DMA |