| 1 | # |
| 2 | # SATA/PATA driver configuration |
| 3 | # |
| 4 | |
| 5 | config HAVE_PATA_PLATFORM |
| 6 | bool |
| 7 | help |
| 8 | This is an internal configuration node for any machine that |
| 9 | uses pata-platform driver to enable the relevant driver in the |
| 10 | configuration structure without having to submit endless patches |
| 11 | to update the PATA_PLATFORM entry. |
| 12 | |
| 13 | menuconfig ATA |
| 14 | tristate "Serial ATA and Parallel ATA drivers" |
| 15 | depends on HAS_IOMEM |
| 16 | depends on BLOCK |
| 17 | depends on !(M32R || M68K) || BROKEN |
| 18 | select SCSI |
| 19 | ---help--- |
| 20 | If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or |
| 21 | any other ATA device under Linux, say Y and make sure that you know |
| 22 | the name of your ATA host adapter (the card inside your computer |
| 23 | that "speaks" the ATA protocol, also called ATA controller), |
| 24 | because you will be asked for it. |
| 25 | |
| 26 | NOTE: ATA enables basic SCSI support; *however*, |
| 27 | 'SCSI disk support', 'SCSI tape support', or |
| 28 | 'SCSI CDROM support' may also be needed, |
| 29 | depending on your hardware configuration. |
| 30 | |
| 31 | if ATA |
| 32 | |
| 33 | config ATA_NONSTANDARD |
| 34 | bool |
| 35 | default n |
| 36 | |
| 37 | config ATA_VERBOSE_ERROR |
| 38 | bool "Verbose ATA error reporting" |
| 39 | default y |
| 40 | help |
| 41 | This option adds parsing of ATA command descriptions and error bits |
| 42 | in libata kernel output, making it easier to interpret. |
| 43 | This option will enlarge the kernel by approx. 6KB. Disable it only |
| 44 | if kernel size is more important than ease of debugging. |
| 45 | |
| 46 | If unsure, say Y. |
| 47 | |
| 48 | config ATA_ACPI |
| 49 | bool "ATA ACPI Support" |
| 50 | depends on ACPI && PCI |
| 51 | default y |
| 52 | help |
| 53 | This option adds support for ATA-related ACPI objects. |
| 54 | These ACPI objects add the ability to retrieve taskfiles |
| 55 | from the ACPI BIOS and write them to the disk controller. |
| 56 | These objects may be related to performance, security, |
| 57 | power management, or other areas. |
| 58 | You can disable this at kernel boot time by using the |
| 59 | option libata.noacpi=1 |
| 60 | |
| 61 | config SATA_PMP |
| 62 | bool "SATA Port Multiplier support" |
| 63 | default y |
| 64 | help |
| 65 | This option adds support for SATA Port Multipliers |
| 66 | (the SATA version of an ethernet hub, or SAS expander). |
| 67 | |
| 68 | comment "Controllers with non-SFF native interface" |
| 69 | |
| 70 | config SATA_AHCI |
| 71 | tristate "AHCI SATA support" |
| 72 | depends on PCI |
| 73 | help |
| 74 | This option enables support for AHCI Serial ATA. |
| 75 | |
| 76 | If unsure, say N. |
| 77 | |
| 78 | config SATA_AHCI_PLATFORM |
| 79 | tristate "Platform AHCI SATA support" |
| 80 | help |
| 81 | This option enables support for Platform AHCI Serial ATA |
| 82 | controllers. |
| 83 | |
| 84 | If unsure, say N. |
| 85 | |
| 86 | config SATA_FSL |
| 87 | tristate "Freescale 3.0Gbps SATA support" |
| 88 | depends on FSL_SOC |
| 89 | help |
| 90 | This option enables support for Freescale 3.0Gbps SATA controller. |
| 91 | It can be found on MPC837x and MPC8315. |
| 92 | |
| 93 | If unsure, say N. |
| 94 | |
| 95 | config SATA_INIC162X |
| 96 | tristate "Initio 162x SATA support" |
| 97 | depends on PCI |
| 98 | help |
| 99 | This option enables support for Initio 162x Serial ATA. |
| 100 | |
| 101 | config SATA_ACARD_AHCI |
| 102 | tristate "ACard AHCI variant (ATP 8620)" |
| 103 | depends on PCI |
| 104 | help |
| 105 | This option enables support for Acard. |
| 106 | |
| 107 | If unsure, say N. |
| 108 | |
| 109 | config SATA_SIL24 |
| 110 | tristate "Silicon Image 3124/3132 SATA support" |
| 111 | depends on PCI |
| 112 | help |
| 113 | This option enables support for Silicon Image 3124/3132 Serial ATA. |
| 114 | |
| 115 | If unsure, say N. |
| 116 | |
| 117 | config ATA_SFF |
| 118 | bool "ATA SFF support" |
| 119 | default y |
| 120 | help |
| 121 | This option adds support for ATA controllers with SFF |
| 122 | compliant or similar programming interface. |
| 123 | |
| 124 | SFF is the legacy IDE interface that has been around since |
| 125 | the dawn of time. Almost all PATA controllers have an |
| 126 | SFF interface. Many SATA controllers have an SFF interface |
| 127 | when configured into a legacy compatibility mode. |
| 128 | |
| 129 | For users with exclusively modern controllers like AHCI, |
| 130 | Silicon Image 3124, or Marvell 6440, you may choose to |
| 131 | disable this unneeded SFF support. |
| 132 | |
| 133 | If unsure, say Y. |
| 134 | |
| 135 | if ATA_SFF |
| 136 | |
| 137 | comment "SFF controllers with custom DMA interface" |
| 138 | |
| 139 | config PDC_ADMA |
| 140 | tristate "Pacific Digital ADMA support" |
| 141 | depends on PCI |
| 142 | help |
| 143 | This option enables support for Pacific Digital ADMA controllers |
| 144 | |
| 145 | If unsure, say N. |
| 146 | |
| 147 | config PATA_OCTEON_CF |
| 148 | tristate "OCTEON Boot Bus Compact Flash support" |
| 149 | depends on CPU_CAVIUM_OCTEON |
| 150 | help |
| 151 | This option enables a polled compact flash driver for use with |
| 152 | compact flash cards attached to the OCTEON boot bus. |
| 153 | |
| 154 | If unsure, say N. |
| 155 | |
| 156 | config SATA_QSTOR |
| 157 | tristate "Pacific Digital SATA QStor support" |
| 158 | depends on PCI |
| 159 | help |
| 160 | This option enables support for Pacific Digital Serial ATA QStor. |
| 161 | |
| 162 | If unsure, say N. |
| 163 | |
| 164 | config SATA_SX4 |
| 165 | tristate "Promise SATA SX4 support (Experimental)" |
| 166 | depends on PCI && EXPERIMENTAL |
| 167 | help |
| 168 | This option enables support for Promise Serial ATA SX4. |
| 169 | |
| 170 | If unsure, say N. |
| 171 | |
| 172 | config ATA_BMDMA |
| 173 | bool "ATA BMDMA support" |
| 174 | default y |
| 175 | help |
| 176 | This option adds support for SFF ATA controllers with BMDMA |
| 177 | capability. BMDMA stands for bus-master DMA and is the |
| 178 | de facto DMA interface for SFF controllers. |
| 179 | |
| 180 | If unsure, say Y. |
| 181 | |
| 182 | if ATA_BMDMA |
| 183 | |
| 184 | comment "SATA SFF controllers with BMDMA" |
| 185 | |
| 186 | config ATA_PIIX |
| 187 | tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support" |
| 188 | depends on PCI |
| 189 | help |
| 190 | This option enables support for ICH5/6/7/8 Serial ATA |
| 191 | and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series |
| 192 | host controllers. |
| 193 | |
| 194 | If unsure, say N. |
| 195 | |
| 196 | config SATA_DWC |
| 197 | tristate "DesignWare Cores SATA support" |
| 198 | depends on 460EX |
| 199 | help |
| 200 | This option enables support for the on-chip SATA controller of the |
| 201 | AppliedMicro processor 460EX. |
| 202 | |
| 203 | If unsure, say N. |
| 204 | |
| 205 | config SATA_DWC_DEBUG |
| 206 | bool "Debugging driver version" |
| 207 | depends on SATA_DWC |
| 208 | help |
| 209 | This option enables debugging output in the driver. |
| 210 | |
| 211 | config SATA_DWC_VDEBUG |
| 212 | bool "Verbose debug output" |
| 213 | depends on SATA_DWC_DEBUG |
| 214 | help |
| 215 | This option enables the taskfile dumping and NCQ debugging. |
| 216 | |
| 217 | config SATA_MV |
| 218 | tristate "Marvell SATA support" |
| 219 | help |
| 220 | This option enables support for the Marvell Serial ATA family. |
| 221 | Currently supports 88SX[56]0[48][01] PCI(-X) chips, |
| 222 | as well as the newer [67]042 PCI-X/PCIe and SOC devices. |
| 223 | |
| 224 | If unsure, say N. |
| 225 | |
| 226 | config SATA_NV |
| 227 | tristate "NVIDIA SATA support" |
| 228 | depends on PCI |
| 229 | help |
| 230 | This option enables support for NVIDIA Serial ATA. |
| 231 | |
| 232 | If unsure, say N. |
| 233 | |
| 234 | config SATA_PROMISE |
| 235 | tristate "Promise SATA TX2/TX4 support" |
| 236 | depends on PCI |
| 237 | help |
| 238 | This option enables support for Promise Serial ATA TX2/TX4. |
| 239 | |
| 240 | If unsure, say N. |
| 241 | |
| 242 | config SATA_SIL |
| 243 | tristate "Silicon Image SATA support" |
| 244 | depends on PCI |
| 245 | help |
| 246 | This option enables support for Silicon Image Serial ATA. |
| 247 | |
| 248 | If unsure, say N. |
| 249 | |
| 250 | config SATA_SIS |
| 251 | tristate "SiS 964/965/966/180 SATA support" |
| 252 | depends on PCI |
| 253 | select PATA_SIS |
| 254 | help |
| 255 | This option enables support for SiS Serial ATA on |
| 256 | SiS 964/965/966/180 and Parallel ATA on SiS 180. |
| 257 | The PATA support for SiS 180 requires additionally to |
| 258 | enable the PATA_SIS driver in the config. |
| 259 | If unsure, say N. |
| 260 | |
| 261 | config SATA_SVW |
| 262 | tristate "ServerWorks Frodo / Apple K2 SATA support" |
| 263 | depends on PCI |
| 264 | help |
| 265 | This option enables support for Broadcom/Serverworks/Apple K2 |
| 266 | SATA support. |
| 267 | |
| 268 | If unsure, say N. |
| 269 | |
| 270 | config SATA_ULI |
| 271 | tristate "ULi Electronics SATA support" |
| 272 | depends on PCI |
| 273 | help |
| 274 | This option enables support for ULi Electronics SATA. |
| 275 | |
| 276 | If unsure, say N. |
| 277 | |
| 278 | config SATA_VIA |
| 279 | tristate "VIA SATA support" |
| 280 | depends on PCI |
| 281 | help |
| 282 | This option enables support for VIA Serial ATA. |
| 283 | |
| 284 | If unsure, say N. |
| 285 | |
| 286 | config SATA_VITESSE |
| 287 | tristate "VITESSE VSC-7174 / INTEL 31244 SATA support" |
| 288 | depends on PCI |
| 289 | help |
| 290 | This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA. |
| 291 | |
| 292 | If unsure, say N. |
| 293 | |
| 294 | comment "PATA SFF controllers with BMDMA" |
| 295 | |
| 296 | config PATA_ALI |
| 297 | tristate "ALi PATA support" |
| 298 | depends on PCI |
| 299 | help |
| 300 | This option enables support for the ALi ATA interfaces |
| 301 | found on the many ALi chipsets. |
| 302 | |
| 303 | If unsure, say N. |
| 304 | |
| 305 | config PATA_AMD |
| 306 | tristate "AMD/NVidia PATA support" |
| 307 | depends on PCI |
| 308 | help |
| 309 | This option enables support for the AMD and NVidia PATA |
| 310 | interfaces found on the chipsets for Athlon/Athlon64. |
| 311 | |
| 312 | If unsure, say N. |
| 313 | |
| 314 | config PATA_ARASAN_CF |
| 315 | tristate "ARASAN CompactFlash PATA Controller Support" |
| 316 | depends on DMADEVICES |
| 317 | select DMA_ENGINE |
| 318 | help |
| 319 | Say Y here to support the ARASAN CompactFlash PATA controller |
| 320 | |
| 321 | config PATA_ARTOP |
| 322 | tristate "ARTOP 6210/6260 PATA support" |
| 323 | depends on PCI |
| 324 | help |
| 325 | This option enables support for ARTOP PATA controllers. |
| 326 | |
| 327 | If unsure, say N. |
| 328 | |
| 329 | config PATA_ATIIXP |
| 330 | tristate "ATI PATA support" |
| 331 | depends on PCI |
| 332 | help |
| 333 | This option enables support for the ATI ATA interfaces |
| 334 | found on the many ATI chipsets. |
| 335 | |
| 336 | If unsure, say N. |
| 337 | |
| 338 | config PATA_ATP867X |
| 339 | tristate "ARTOP/Acard ATP867X PATA support" |
| 340 | depends on PCI |
| 341 | help |
| 342 | This option enables support for ARTOP/Acard ATP867X PATA |
| 343 | controllers. |
| 344 | |
| 345 | If unsure, say N. |
| 346 | |
| 347 | config PATA_BF54X |
| 348 | tristate "Blackfin 54x ATAPI support" |
| 349 | depends on BF542 || BF548 || BF549 |
| 350 | help |
| 351 | This option enables support for the built-in ATAPI controller on |
| 352 | Blackfin 54x family chips. |
| 353 | |
| 354 | If unsure, say N. |
| 355 | |
| 356 | config PATA_CMD64X |
| 357 | tristate "CMD64x PATA support" |
| 358 | depends on PCI |
| 359 | help |
| 360 | This option enables support for the CMD64x series chips |
| 361 | except for the CMD640. |
| 362 | |
| 363 | If unsure, say N. |
| 364 | |
| 365 | config PATA_CS5520 |
| 366 | tristate "CS5510/5520 PATA support" |
| 367 | depends on PCI |
| 368 | help |
| 369 | This option enables support for the Cyrix 5510/5520 |
| 370 | companion chip used with the MediaGX/Geode processor family. |
| 371 | |
| 372 | If unsure, say N. |
| 373 | |
| 374 | config PATA_CS5530 |
| 375 | tristate "CS5530 PATA support" |
| 376 | depends on PCI |
| 377 | help |
| 378 | This option enables support for the Cyrix/NatSemi/AMD CS5530 |
| 379 | companion chip used with the MediaGX/Geode processor family. |
| 380 | |
| 381 | If unsure, say N. |
| 382 | |
| 383 | config PATA_CS5535 |
| 384 | tristate "CS5535 PATA support (Experimental)" |
| 385 | depends on PCI && X86 && !X86_64 && EXPERIMENTAL |
| 386 | help |
| 387 | This option enables support for the NatSemi/AMD CS5535 |
| 388 | companion chip used with the Geode processor family. |
| 389 | |
| 390 | If unsure, say N. |
| 391 | |
| 392 | config PATA_CS5536 |
| 393 | tristate "CS5536 PATA support" |
| 394 | depends on PCI |
| 395 | help |
| 396 | This option enables support for the AMD CS5536 |
| 397 | companion chip used with the Geode LX processor family. |
| 398 | |
| 399 | If unsure, say N. |
| 400 | |
| 401 | config PATA_CYPRESS |
| 402 | tristate "Cypress CY82C693 PATA support (Very Experimental)" |
| 403 | depends on PCI && EXPERIMENTAL |
| 404 | help |
| 405 | This option enables support for the Cypress/Contaq CY82C693 |
| 406 | chipset found in some Alpha systems |
| 407 | |
| 408 | If unsure, say N. |
| 409 | |
| 410 | config PATA_EFAR |
| 411 | tristate "EFAR SLC90E66 support" |
| 412 | depends on PCI |
| 413 | help |
| 414 | This option enables support for the EFAR SLC90E66 |
| 415 | IDE controller found on some older machines. |
| 416 | |
| 417 | If unsure, say N. |
| 418 | |
| 419 | config PATA_HPT366 |
| 420 | tristate "HPT 366/368 PATA support" |
| 421 | depends on PCI |
| 422 | help |
| 423 | This option enables support for the HPT 366 and 368 |
| 424 | PATA controllers via the new ATA layer. |
| 425 | |
| 426 | If unsure, say N. |
| 427 | |
| 428 | config PATA_HPT37X |
| 429 | tristate "HPT 370/370A/371/372/374/302 PATA support" |
| 430 | depends on PCI |
| 431 | help |
| 432 | This option enables support for the majority of the later HPT |
| 433 | PATA controllers via the new ATA layer. |
| 434 | |
| 435 | If unsure, say N. |
| 436 | |
| 437 | config PATA_HPT3X2N |
| 438 | tristate "HPT 371N/372N/302N PATA support" |
| 439 | depends on PCI |
| 440 | help |
| 441 | This option enables support for the N variant HPT PATA |
| 442 | controllers via the new ATA layer. |
| 443 | |
| 444 | If unsure, say N. |
| 445 | |
| 446 | config PATA_HPT3X3 |
| 447 | tristate "HPT 343/363 PATA support" |
| 448 | depends on PCI |
| 449 | help |
| 450 | This option enables support for the HPT 343/363 |
| 451 | PATA controllers via the new ATA layer |
| 452 | |
| 453 | If unsure, say N. |
| 454 | |
| 455 | config PATA_HPT3X3_DMA |
| 456 | bool "HPT 343/363 DMA support" |
| 457 | depends on PATA_HPT3X3 |
| 458 | help |
| 459 | This option enables DMA support for the HPT343/363 |
| 460 | controllers. Enable with care as there are still some |
| 461 | problems with DMA on this chipset. |
| 462 | |
| 463 | config PATA_ICSIDE |
| 464 | tristate "Acorn ICS PATA support" |
| 465 | depends on ARM && ARCH_ACORN |
| 466 | help |
| 467 | On Acorn systems, say Y here if you wish to use the ICS PATA |
| 468 | interface card. This is not required for ICS partition support. |
| 469 | If you are unsure, say N to this. |
| 470 | |
| 471 | config PATA_IMX |
| 472 | tristate "PATA support for Freescale iMX" |
| 473 | depends on ARCH_MXC |
| 474 | help |
| 475 | This option enables support for the PATA host available on Freescale |
| 476 | iMX SoCs. |
| 477 | |
| 478 | If unsure, say N. |
| 479 | |
| 480 | config PATA_IT8213 |
| 481 | tristate "IT8213 PATA support (Experimental)" |
| 482 | depends on PCI && EXPERIMENTAL |
| 483 | help |
| 484 | This option enables support for the ITE 821 PATA |
| 485 | controllers via the new ATA layer. |
| 486 | |
| 487 | If unsure, say N. |
| 488 | |
| 489 | config PATA_IT821X |
| 490 | tristate "IT8211/2 PATA support" |
| 491 | depends on PCI |
| 492 | help |
| 493 | This option enables support for the ITE 8211 and 8212 |
| 494 | PATA controllers via the new ATA layer, including RAID |
| 495 | mode. |
| 496 | |
| 497 | If unsure, say N. |
| 498 | |
| 499 | config PATA_JMICRON |
| 500 | tristate "JMicron PATA support" |
| 501 | depends on PCI |
| 502 | help |
| 503 | Enable support for the JMicron IDE controller, via the new |
| 504 | ATA layer. |
| 505 | |
| 506 | If unsure, say N. |
| 507 | |
| 508 | config PATA_MACIO |
| 509 | tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE" |
| 510 | depends on PPC_PMAC |
| 511 | help |
| 512 | Most IDE capable PowerMacs have IDE busses driven by a variant |
| 513 | of this controller which is part of the Apple chipset used on |
| 514 | most PowerMac models. Some models have multiple busses using |
| 515 | different chipsets, though generally, MacIO is one of them. |
| 516 | |
| 517 | config PATA_MARVELL |
| 518 | tristate "Marvell PATA support via legacy mode" |
| 519 | depends on PCI |
| 520 | help |
| 521 | This option enables limited support for the Marvell 88SE61xx ATA |
| 522 | controllers. If you wish to use only the SATA ports then select |
| 523 | the AHCI driver alone. If you wish to the use the PATA port or |
| 524 | both SATA and PATA include this driver. |
| 525 | |
| 526 | If unsure, say N. |
| 527 | |
| 528 | config PATA_MPC52xx |
| 529 | tristate "Freescale MPC52xx SoC internal IDE" |
| 530 | depends on PPC_MPC52xx && PPC_BESTCOMM |
| 531 | select PPC_BESTCOMM_ATA |
| 532 | help |
| 533 | This option enables support for integrated IDE controller |
| 534 | of the Freescale MPC52xx SoC. |
| 535 | |
| 536 | If unsure, say N. |
| 537 | |
| 538 | config PATA_NETCELL |
| 539 | tristate "NETCELL Revolution RAID support" |
| 540 | depends on PCI |
| 541 | help |
| 542 | This option enables support for the Netcell Revolution RAID |
| 543 | PATA controller. |
| 544 | |
| 545 | If unsure, say N. |
| 546 | |
| 547 | config PATA_NINJA32 |
| 548 | tristate "Ninja32/Delkin Cardbus ATA support" |
| 549 | depends on PCI |
| 550 | help |
| 551 | This option enables support for the Ninja32, Delkin and |
| 552 | possibly other brands of Cardbus ATA adapter |
| 553 | |
| 554 | If unsure, say N. |
| 555 | |
| 556 | config PATA_NS87415 |
| 557 | tristate "Nat Semi NS87415 PATA support" |
| 558 | depends on PCI |
| 559 | help |
| 560 | This option enables support for the National Semiconductor |
| 561 | NS87415 PCI-IDE controller. |
| 562 | |
| 563 | If unsure, say N. |
| 564 | |
| 565 | config PATA_OLDPIIX |
| 566 | tristate "Intel PATA old PIIX support" |
| 567 | depends on PCI |
| 568 | help |
| 569 | This option enables support for early PIIX PATA support. |
| 570 | |
| 571 | If unsure, say N. |
| 572 | |
| 573 | config PATA_OPTIDMA |
| 574 | tristate "OPTI FireStar PATA support (Very Experimental)" |
| 575 | depends on PCI && EXPERIMENTAL |
| 576 | help |
| 577 | This option enables DMA/PIO support for the later OPTi |
| 578 | controllers found on some old motherboards and in some |
| 579 | laptops. |
| 580 | |
| 581 | If unsure, say N. |
| 582 | |
| 583 | config PATA_PDC2027X |
| 584 | tristate "Promise PATA 2027x support" |
| 585 | depends on PCI |
| 586 | help |
| 587 | This option enables support for Promise PATA pdc20268 to pdc20277 host adapters. |
| 588 | |
| 589 | If unsure, say N. |
| 590 | |
| 591 | config PATA_PDC_OLD |
| 592 | tristate "Older Promise PATA controller support" |
| 593 | depends on PCI |
| 594 | help |
| 595 | This option enables support for the Promise 20246, 20262, 20263, |
| 596 | 20265 and 20267 adapters. |
| 597 | |
| 598 | If unsure, say N. |
| 599 | |
| 600 | config PATA_RADISYS |
| 601 | tristate "RADISYS 82600 PATA support (Experimental)" |
| 602 | depends on PCI && EXPERIMENTAL |
| 603 | help |
| 604 | This option enables support for the RADISYS 82600 |
| 605 | PATA controllers via the new ATA layer |
| 606 | |
| 607 | If unsure, say N. |
| 608 | |
| 609 | config PATA_RDC |
| 610 | tristate "RDC PATA support" |
| 611 | depends on PCI |
| 612 | help |
| 613 | This option enables basic support for the later RDC PATA controllers |
| 614 | controllers via the new ATA layer. For the RDC 1010, you need to |
| 615 | enable the IT821X driver instead. |
| 616 | |
| 617 | If unsure, say N. |
| 618 | |
| 619 | config PATA_SC1200 |
| 620 | tristate "SC1200 PATA support" |
| 621 | depends on PCI |
| 622 | help |
| 623 | This option enables support for the NatSemi/AMD SC1200 SoC |
| 624 | companion chip used with the Geode processor family. |
| 625 | |
| 626 | If unsure, say N. |
| 627 | |
| 628 | config PATA_SCC |
| 629 | tristate "Toshiba's Cell Reference Set IDE support" |
| 630 | depends on PCI && PPC_CELLEB |
| 631 | help |
| 632 | This option enables support for the built-in IDE controller on |
| 633 | Toshiba Cell Reference Board. |
| 634 | |
| 635 | If unsure, say N. |
| 636 | |
| 637 | config PATA_SCH |
| 638 | tristate "Intel SCH PATA support" |
| 639 | depends on PCI |
| 640 | help |
| 641 | This option enables support for Intel SCH PATA on the Intel |
| 642 | SCH (US15W, US15L, UL11L) series host controllers. |
| 643 | |
| 644 | If unsure, say N. |
| 645 | |
| 646 | config PATA_SERVERWORKS |
| 647 | tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support" |
| 648 | depends on PCI |
| 649 | help |
| 650 | This option enables support for the Serverworks OSB4/CSB5/CSB6 and |
| 651 | HT1000 PATA controllers, via the new ATA layer. |
| 652 | |
| 653 | If unsure, say N. |
| 654 | |
| 655 | config PATA_SIL680 |
| 656 | tristate "CMD / Silicon Image 680 PATA support" |
| 657 | depends on PCI |
| 658 | help |
| 659 | This option enables support for CMD / Silicon Image 680 PATA. |
| 660 | |
| 661 | If unsure, say N. |
| 662 | |
| 663 | config PATA_SIS |
| 664 | tristate "SiS PATA support" |
| 665 | depends on PCI |
| 666 | help |
| 667 | This option enables support for SiS PATA controllers |
| 668 | |
| 669 | If unsure, say N. |
| 670 | |
| 671 | config PATA_TOSHIBA |
| 672 | tristate "Toshiba Piccolo support (Experimental)" |
| 673 | depends on PCI && EXPERIMENTAL |
| 674 | help |
| 675 | Support for the Toshiba Piccolo controllers. Currently only the |
| 676 | primary channel is supported by this driver. |
| 677 | |
| 678 | If unsure, say N. |
| 679 | |
| 680 | config PATA_TRIFLEX |
| 681 | tristate "Compaq Triflex PATA support" |
| 682 | depends on PCI |
| 683 | help |
| 684 | Enable support for the Compaq 'Triflex' IDE controller as found |
| 685 | on many Compaq Pentium-Pro systems, via the new ATA layer. |
| 686 | |
| 687 | If unsure, say N. |
| 688 | |
| 689 | config PATA_VIA |
| 690 | tristate "VIA PATA support" |
| 691 | depends on PCI |
| 692 | help |
| 693 | This option enables support for the VIA PATA interfaces |
| 694 | found on the many VIA chipsets. |
| 695 | |
| 696 | If unsure, say N. |
| 697 | |
| 698 | config PATA_PXA |
| 699 | tristate "PXA DMA-capable PATA support" |
| 700 | depends on ARCH_PXA |
| 701 | help |
| 702 | This option enables support for harddrive attached to PXA CPU's bus. |
| 703 | |
| 704 | NOTE: This driver utilizes PXA DMA controller, in case your hardware |
| 705 | is not capable of doing MWDMA, use pata_platform instead. |
| 706 | |
| 707 | If unsure, say N. |
| 708 | |
| 709 | config PATA_WINBOND |
| 710 | tristate "Winbond SL82C105 PATA support" |
| 711 | depends on PCI |
| 712 | help |
| 713 | This option enables support for SL82C105 PATA devices found in the |
| 714 | Netwinder and some other systems |
| 715 | |
| 716 | If unsure, say N. |
| 717 | |
| 718 | endif # ATA_BMDMA |
| 719 | |
| 720 | comment "PIO-only SFF controllers" |
| 721 | |
| 722 | config PATA_AT32 |
| 723 | tristate "Atmel AVR32 PATA support (Experimental)" |
| 724 | depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL |
| 725 | help |
| 726 | This option enables support for the IDE devices on the |
| 727 | Atmel AT32AP platform. |
| 728 | |
| 729 | If unsure, say N. |
| 730 | |
| 731 | config PATA_AT91 |
| 732 | tristate "PATA support for AT91SAM9260" |
| 733 | depends on ARM && ARCH_AT91 |
| 734 | help |
| 735 | This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. |
| 736 | |
| 737 | If unsure, say N. |
| 738 | |
| 739 | config PATA_CMD640_PCI |
| 740 | tristate "CMD640 PCI PATA support (Experimental)" |
| 741 | depends on PCI && EXPERIMENTAL |
| 742 | help |
| 743 | This option enables support for the CMD640 PCI IDE |
| 744 | interface chip. Only the primary channel is currently |
| 745 | supported. |
| 746 | |
| 747 | If unsure, say N. |
| 748 | |
| 749 | config PATA_ISAPNP |
| 750 | tristate "ISA Plug and Play PATA support" |
| 751 | depends on ISAPNP |
| 752 | help |
| 753 | This option enables support for ISA plug & play ATA |
| 754 | controllers such as those found on old soundcards. |
| 755 | |
| 756 | If unsure, say N. |
| 757 | |
| 758 | config PATA_IXP4XX_CF |
| 759 | tristate "IXP4XX Compact Flash support" |
| 760 | depends on ARCH_IXP4XX |
| 761 | help |
| 762 | This option enables support for a Compact Flash connected on |
| 763 | the ixp4xx expansion bus. This driver had been written for |
| 764 | Loft/Avila boards in mind but can work with others. |
| 765 | |
| 766 | If unsure, say N. |
| 767 | |
| 768 | config PATA_MPIIX |
| 769 | tristate "Intel PATA MPIIX support" |
| 770 | depends on PCI |
| 771 | help |
| 772 | This option enables support for MPIIX PATA support. |
| 773 | |
| 774 | If unsure, say N. |
| 775 | |
| 776 | config PATA_NS87410 |
| 777 | tristate "Nat Semi NS87410 PATA support" |
| 778 | depends on PCI |
| 779 | help |
| 780 | This option enables support for the National Semiconductor |
| 781 | NS87410 PCI-IDE controller. |
| 782 | |
| 783 | If unsure, say N. |
| 784 | |
| 785 | config PATA_OPTI |
| 786 | tristate "OPTI621/6215 PATA support (Very Experimental)" |
| 787 | depends on PCI && EXPERIMENTAL |
| 788 | help |
| 789 | This option enables full PIO support for the early Opti ATA |
| 790 | controllers found on some old motherboards. |
| 791 | |
| 792 | If unsure, say N. |
| 793 | |
| 794 | config PATA_PALMLD |
| 795 | tristate "Palm LifeDrive PATA support" |
| 796 | depends on MACH_PALMLD |
| 797 | help |
| 798 | This option enables support for Palm LifeDrive's internal ATA |
| 799 | port via the new ATA layer. |
| 800 | |
| 801 | If unsure, say N. |
| 802 | |
| 803 | config PATA_PCMCIA |
| 804 | tristate "PCMCIA PATA support" |
| 805 | depends on PCMCIA |
| 806 | help |
| 807 | This option enables support for PCMCIA ATA interfaces, including |
| 808 | compact flash card adapters via the new ATA layer. |
| 809 | |
| 810 | If unsure, say N. |
| 811 | |
| 812 | config PATA_PLATFORM |
| 813 | tristate "Generic platform device PATA support" |
| 814 | depends on EXPERT || PPC || HAVE_PATA_PLATFORM |
| 815 | help |
| 816 | This option enables support for generic directly connected ATA |
| 817 | devices commonly found on embedded systems. |
| 818 | |
| 819 | If unsure, say N. |
| 820 | |
| 821 | config PATA_OF_PLATFORM |
| 822 | tristate "OpenFirmware platform device PATA support" |
| 823 | depends on PATA_PLATFORM && OF |
| 824 | help |
| 825 | This option enables support for generic directly connected ATA |
| 826 | devices commonly found on embedded systems with OpenFirmware |
| 827 | bindings. |
| 828 | |
| 829 | If unsure, say N. |
| 830 | |
| 831 | config PATA_QDI |
| 832 | tristate "QDI VLB PATA support" |
| 833 | depends on ISA |
| 834 | select PATA_LEGACY |
| 835 | help |
| 836 | Support for QDI 6500 and 6580 PATA controllers on VESA local bus. |
| 837 | |
| 838 | config PATA_RB532 |
| 839 | tristate "RouterBoard 532 PATA CompactFlash support" |
| 840 | depends on MIKROTIK_RB532 |
| 841 | help |
| 842 | This option enables support for the RouterBoard 532 |
| 843 | PATA CompactFlash controller. |
| 844 | |
| 845 | If unsure, say N. |
| 846 | |
| 847 | config PATA_RZ1000 |
| 848 | tristate "PC Tech RZ1000 PATA support" |
| 849 | depends on PCI |
| 850 | help |
| 851 | This option enables basic support for the PC Tech RZ1000/1 |
| 852 | PATA controllers via the new ATA layer |
| 853 | |
| 854 | If unsure, say N. |
| 855 | |
| 856 | config PATA_SAMSUNG_CF |
| 857 | tristate "Samsung SoC PATA support" |
| 858 | depends on SAMSUNG_DEV_IDE |
| 859 | help |
| 860 | This option enables basic support for Samsung's S3C/S5P board |
| 861 | PATA controllers via the new ATA layer |
| 862 | |
| 863 | If unsure, say N. |
| 864 | |
| 865 | config PATA_WINBOND_VLB |
| 866 | tristate "Winbond W83759A VLB PATA support (Experimental)" |
| 867 | depends on ISA && EXPERIMENTAL |
| 868 | select PATA_LEGACY |
| 869 | help |
| 870 | Support for the Winbond W83759A controller on Vesa Local Bus |
| 871 | systems. |
| 872 | |
| 873 | comment "Generic fallback / legacy drivers" |
| 874 | |
| 875 | config PATA_ACPI |
| 876 | tristate "ACPI firmware driver for PATA" |
| 877 | depends on ATA_ACPI && ATA_BMDMA |
| 878 | help |
| 879 | This option enables an ACPI method driver which drives |
| 880 | motherboard PATA controller interfaces through the ACPI |
| 881 | firmware in the BIOS. This driver can sometimes handle |
| 882 | otherwise unsupported hardware. |
| 883 | |
| 884 | config ATA_GENERIC |
| 885 | tristate "Generic ATA support" |
| 886 | depends on PCI && ATA_BMDMA |
| 887 | help |
| 888 | This option enables support for generic BIOS configured |
| 889 | ATA controllers via the new ATA layer |
| 890 | |
| 891 | If unsure, say N. |
| 892 | |
| 893 | config PATA_LEGACY |
| 894 | tristate "Legacy ISA PATA support (Experimental)" |
| 895 | depends on (ISA || PCI) && EXPERIMENTAL |
| 896 | help |
| 897 | This option enables support for ISA/VLB/PCI bus legacy PATA |
| 898 | ports and allows them to be accessed via the new ATA layer. |
| 899 | |
| 900 | If unsure, say N. |
| 901 | |
| 902 | endif # ATA_SFF |
| 903 | endif # ATA |