[GitHub/mt8127/android_kernel_alcatel_ttab.git] / arch / powerpc / kernel / Makefile

#
# Makefile for the linux kernel.
#

CFLAGS_ptrace.o		+= -DUTS_MACHINE='"$(UTS_MACHINE)"'

subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror

ifeq ($(CONFIG_PPC64),y)
CFLAGS_prom_init.o	+= $(NO_MINIMAL_TOC)
endif
ifeq ($(CONFIG_PPC32),y)
CFLAGS_prom_init.o      += -fPIC
CFLAGS_btext.o		+= -fPIC
endif

ifdef CONFIG_FUNCTION_TRACER
# Do not trace early boot code
CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
# do not trace tracer code
CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
# timers used by tracing
CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
endif

obj-y				:= cputable.o ptrace.o syscalls.o \
				   irq.o align.o signal_32.o pmc.o vdso.o \
				   process.o systbl.o idle.o \
				   signal.o sysfs.o cacheinfo.o time.o \
				   prom.o traps.o setup-common.o \
				   udbg.o misc.o io.o dma.o \
				   misc_$(CONFIG_WORD_SIZE).o vdso32/
obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
				   signal_64.o ptrace32.o \
				   paca.o nvram_64.o firmware.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_power.o
obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o idle_book3e.o
obj-$(CONFIG_PPC_A2)		+= cpu_setup_a2.o
obj-$(CONFIG_PPC64)		+= vdso64/
obj-$(CONFIG_ALTIVEC)		+= vecemu.o
obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
obj-$(CONFIG_PPC_P7_NAP)	+= idle_power7.o
obj-$(CONFIG_PPC_OF)		+= of_platform.o prom_parse.o
obj-$(CONFIG_PPC_CLOCK)		+= clock.o
procfs-y			:= proc_powerpc.o
obj-$(CONFIG_PROC_FS)		+= $(procfs-y)
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI)	:= rtas_pci.o
obj-$(CONFIG_PPC_RTAS)		+= rtas.o rtas-rtc.o $(rtaspci-y-y)
obj-$(CONFIG_PPC_RTAS_DAEMON)	+= rtasd.o
obj-$(CONFIG_RTAS_FLASH)	+= rtas_flash.o
obj-$(CONFIG_RTAS_PROC)		+= rtas-proc.o
obj-$(CONFIG_LPARCFG)		+= lparcfg.o
obj-$(CONFIG_IBMVIO)		+= vio.o
obj-$(CONFIG_IBMEBUS)           += ibmebus.o
obj-$(CONFIG_GENERIC_TBSYNC)	+= smp-tbsync.o
obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
obj-$(CONFIG_FA_DUMP)		+= fadump.o
ifeq ($(CONFIG_PPC32),y)
obj-$(CONFIG_E500)		+= idle_e500.o
endif
obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
obj-$(CONFIG_TAU)		+= tau_6xx.o
obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o
ifeq ($(CONFIG_FSL_BOOKE),y)
obj-$(CONFIG_HIBERNATION)	+= swsusp_booke.o
else
obj-$(CONFIG_HIBERNATION)	+= swsusp_$(CONFIG_WORD_SIZE).o
endif
obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_44x)		+= cpu_setup_44x.o
obj-$(CONFIG_PPC_FSL_BOOK3E)	+= cpu_setup_fsl_booke.o
obj-$(CONFIG_PPC_DOORBELL)	+= dbell.o
obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o

extra-y				:= head_$(CONFIG_WORD_SIZE).o
extra-$(CONFIG_40x)		:= head_40x.o
extra-$(CONFIG_44x)		:= head_44x.o
extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
extra-$(CONFIG_8xx)		:= head_8xx.o
extra-y				+= vmlinux.lds

obj-$(CONFIG_RELOCATABLE_PPC32)	+= reloc_32.o

obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
obj-$(CONFIG_PPC64)		+= dma-iommu.o iommu.o
obj-$(CONFIG_KGDB)		+= kgdb.o
obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
obj-$(CONFIG_SMP)		+= smp.o
obj-$(CONFIG_KPROBES)		+= kprobes.o
obj-$(CONFIG_UPROBES)		+= uprobes.o
obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o

pci64-$(CONFIG_PPC64)		+= pci_dn.o isa-bridge.o
obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
				   pci-common.o pci_of_scan.o
obj-$(CONFIG_PCI_MSI)		+= msi.o
obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o \
				   machine_kexec_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_AUDIT)		+= audit.o
obj64-$(CONFIG_AUDIT)		+= compat_audit.o

obj-$(CONFIG_PPC_IO_WORKAROUNDS)	+= io-workarounds.o

obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
obj-$(CONFIG_FTRACE_SYSCALLS)	+= ftrace.o

obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o

ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
obj-y				+= iomap.o
endif

obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM)	+= tm.o

obj-$(CONFIG_PPC64)		+= $(obj64-y)
obj-$(CONFIG_PPC32)		+= $(obj32-y)

ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
obj-y				+= ppc_save_regs.o
endif

obj-$(CONFIG_EPAPR_PARAVIRT)	+= epapr_paravirt.o epapr_hcalls.o
obj-$(CONFIG_KVM_GUEST)		+= kvm.o kvm_emul.o

# Disable GCOV in odd or sensitive code
GCOV_PROFILE_prom_init.o := n
GCOV_PROFILE_ftrace.o := n
GCOV_PROFILE_machine_kexec_64.o := n
GCOV_PROFILE_machine_kexec_32.o := n
GCOV_PROFILE_kprobes.o := n

extra-$(CONFIG_PPC_FPU)		+= fpu.o
extra-$(CONFIG_ALTIVEC)		+= vector.o
extra-$(CONFIG_PPC64)		+= entry_64.o
extra-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE)	+= prom_init.o

extra-y				+= systbl_chk.i
$(obj)/systbl.o:		systbl_chk

quiet_cmd_systbl_chk = CALL    $<
      cmd_systbl_chk = $(CONFIG_SHELL) $< $(obj)/systbl_chk.i

PHONY += systbl_chk
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
	$(call cmd,systbl_chk)

ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y)
$(obj)/built-in.o:		prom_init_check

quiet_cmd_prom_init_check = CALL    $<
      cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o"

PHONY += prom_init_check
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
	$(call cmd,prom_init_check)
endif

clean-files := vmlinux.lds
Commit	Line	Data
	1	#
	2	# Makefile for the linux kernel.
	3	#
	4
	5	CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
	6
	7	subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
	8
	9	ifeq ($(CONFIG_PPC64),y)
	10	CFLAGS_prom_init.o += $(NO_MINIMAL_TOC)
	11	endif
	12	ifeq ($(CONFIG_PPC32),y)
	13	CFLAGS_prom_init.o += -fPIC
	14	CFLAGS_btext.o += -fPIC
	15	endif
	16
	17	ifdef CONFIG_FUNCTION_TRACER
	18	# Do not trace early boot code
	19	CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
	20	CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
	21	CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
	22	CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
	23	# do not trace tracer code
	24	CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
	25	# timers used by tracing
	26	CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
	27	endif
	28
	29	obj-y := cputable.o ptrace.o syscalls.o \
	30	irq.o align.o signal_32.o pmc.o vdso.o \
	31	process.o systbl.o idle.o \
	32	signal.o sysfs.o cacheinfo.o time.o \
	33	prom.o traps.o setup-common.o \
	34	udbg.o misc.o io.o dma.o \
	35	misc_$(CONFIG_WORD_SIZE).o vdso32/
	36	obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
	37	signal_64.o ptrace32.o \
	38	paca.o nvram_64.o firmware.o
	39	obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
	40	obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_ppc970.o cpu_setup_pa6t.o
	41	obj-$(CONFIG_PPC_BOOK3S_64) += cpu_setup_power.o
	42	obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
	43	obj-$(CONFIG_PPC_BOOK3E_64) += exceptions-64e.o idle_book3e.o
	44	obj-$(CONFIG_PPC_A2) += cpu_setup_a2.o
	45	obj-$(CONFIG_PPC64) += vdso64/
	46	obj-$(CONFIG_ALTIVEC) += vecemu.o
	47	obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
	48	obj-$(CONFIG_PPC_P7_NAP) += idle_power7.o
	49	obj-$(CONFIG_PPC_OF) += of_platform.o prom_parse.o
	50	obj-$(CONFIG_PPC_CLOCK) += clock.o
	51	procfs-y := proc_powerpc.o
	52	obj-$(CONFIG_PROC_FS) += $(procfs-y)
	53	rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
	54	obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y)
	55	obj-$(CONFIG_PPC_RTAS_DAEMON) += rtasd.o
	56	obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
	57	obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
	58	obj-$(CONFIG_LPARCFG) += lparcfg.o
	59	obj-$(CONFIG_IBMVIO) += vio.o
	60	obj-$(CONFIG_IBMEBUS) += ibmebus.o
	61	obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
	62	obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
	63	obj-$(CONFIG_FA_DUMP) += fadump.o
	64	ifeq ($(CONFIG_PPC32),y)
	65	obj-$(CONFIG_E500) += idle_e500.o
	66	endif
	67	obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
	68	obj-$(CONFIG_TAU) += tau_6xx.o
	69	obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o
	70	ifeq ($(CONFIG_FSL_BOOKE),y)
	71	obj-$(CONFIG_HIBERNATION) += swsusp_booke.o
	72	else
	73	obj-$(CONFIG_HIBERNATION) += swsusp_$(CONFIG_WORD_SIZE).o
	74	endif
	75	obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
	76	obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
	77	obj-$(CONFIG_44x) += cpu_setup_44x.o
	78	obj-$(CONFIG_PPC_FSL_BOOK3E) += cpu_setup_fsl_booke.o
	79	obj-$(CONFIG_PPC_DOORBELL) += dbell.o
	80	obj-$(CONFIG_JUMP_LABEL) += jump_label.o
	81
	82	extra-y := head_$(CONFIG_WORD_SIZE).o
	83	extra-$(CONFIG_40x) := head_40x.o
	84	extra-$(CONFIG_44x) := head_44x.o
	85	extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
	86	extra-$(CONFIG_8xx) := head_8xx.o
	87	extra-y += vmlinux.lds
	88
	89	obj-$(CONFIG_RELOCATABLE_PPC32) += reloc_32.o
	90
	91	obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
	92	obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
	93	obj-$(CONFIG_KGDB) += kgdb.o
	94	obj-$(CONFIG_MODULES) += ppc_ksyms.o
	95	obj-$(CONFIG_BOOTX_TEXT) += btext.o
	96	obj-$(CONFIG_SMP) += smp.o
	97	obj-$(CONFIG_KPROBES) += kprobes.o
	98	obj-$(CONFIG_UPROBES) += uprobes.o
	99	obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
	100	obj-$(CONFIG_STACKTRACE) += stacktrace.o
	101	obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
	102
	103	pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
	104	obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
	105	pci-common.o pci_of_scan.o
	106	obj-$(CONFIG_PCI_MSI) += msi.o
	107	obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
	108	machine_kexec_$(CONFIG_WORD_SIZE).o
	109	obj-$(CONFIG_AUDIT) += audit.o
	110	obj64-$(CONFIG_AUDIT) += compat_audit.o
	111
	112	obj-$(CONFIG_PPC_IO_WORKAROUNDS) += io-workarounds.o
	113
	114	obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
	115	obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
	116	obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o
	117
	118	obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
	119
	120	ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
	121	obj-y += iomap.o
	122	endif
	123
	124	obj64-$(CONFIG_PPC_TRANSACTIONAL_MEM) += tm.o
	125
	126	obj-$(CONFIG_PPC64) += $(obj64-y)
	127	obj-$(CONFIG_PPC32) += $(obj32-y)
	128
	129	ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
	130	obj-y += ppc_save_regs.o
	131	endif
	132
	133	obj-$(CONFIG_EPAPR_PARAVIRT) += epapr_paravirt.o epapr_hcalls.o
	134	obj-$(CONFIG_KVM_GUEST) += kvm.o kvm_emul.o
	135
	136	# Disable GCOV in odd or sensitive code
	137	GCOV_PROFILE_prom_init.o := n
	138	GCOV_PROFILE_ftrace.o := n
	139	GCOV_PROFILE_machine_kexec_64.o := n
	140	GCOV_PROFILE_machine_kexec_32.o := n
	141	GCOV_PROFILE_kprobes.o := n
	142
	143	extra-$(CONFIG_PPC_FPU) += fpu.o
	144	extra-$(CONFIG_ALTIVEC) += vector.o
	145	extra-$(CONFIG_PPC64) += entry_64.o
	146	extra-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o
	147
	148	extra-y += systbl_chk.i
	149	$(obj)/systbl.o: systbl_chk
	150
	151	quiet_cmd_systbl_chk = CALL $<
	152	cmd_systbl_chk = $(CONFIG_SHELL) $< $(obj)/systbl_chk.i
	153
	154	PHONY += systbl_chk
	155	systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
	156	$(call cmd,systbl_chk)
	157
	158	ifeq ($(CONFIG_PPC_OF_BOOT_TRAMPOLINE),y)
	159	$(obj)/built-in.o: prom_init_check
	160
	161	quiet_cmd_prom_init_check = CALL $<
	162	cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o"
	163
	164	PHONY += prom_init_check
	165	prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
	166	$(call cmd,prom_init_check)
	167	endif
	168
	169	clean-files := vmlinux.lds