[GitHub/mt8127/android_kernel_alcatel_ttab.git] / sound / oss / dmasound / dmasound.h

#ifndef _dmasound_h_
/*
 *  linux/sound/oss/dmasound/dmasound.h
 *
 *
 *  Minor numbers for the sound driver.
 *
 *  Unfortunately Creative called the codec chip of SB as a DSP. For this
 *  reason the /dev/dsp is reserved for digitized audio use. There is a
 *  device for true DSP processors but it will be called something else.
 *  In v3.0 it's /dev/sndproc but this could be a temporary solution.
 */
#define _dmasound_h_

#include <linux/types.h>

#define SND_NDEVS	256	/* Number of supported devices */
#define SND_DEV_CTL	0	/* Control port /dev/mixer */
#define SND_DEV_SEQ	1	/* Sequencer output /dev/sequencer (FM
				   synthesizer and MIDI output) */
#define SND_DEV_MIDIN	2	/* Raw midi access */
#define SND_DEV_DSP	3	/* Digitized voice /dev/dsp */
#define SND_DEV_AUDIO	4	/* Sparc compatible /dev/audio */
#define SND_DEV_DSP16	5	/* Like /dev/dsp but 16 bits/sample */
#define SND_DEV_STATUS	6	/* /dev/sndstat */
/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
#define SND_DEV_SEQ2	8	/* /dev/sequencer, level 2 interface */
#define SND_DEV_SNDPROC 9	/* /dev/sndproc for programmable devices */
#define SND_DEV_PSS	SND_DEV_SNDPROC

/* switch on various prinks */
#define DEBUG_DMASOUND 1

#define MAX_AUDIO_DEV	5
#define MAX_MIXER_DEV	4
#define MAX_SYNTH_DEV	3
#define MAX_MIDI_DEV	6
#define MAX_TIMER_DEV	3

#define MAX_CATCH_RADIUS	10

#define le2be16(x)	(((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff))
#define le2be16dbl(x)	(((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff))

#define IOCTL_IN(arg, ret) \
	do { int error = get_user(ret, (int __user *)(arg)); \
		if (error) return error; \
	} while (0)
#define IOCTL_OUT(arg, ret)	ioctl_return((int __user *)(arg), ret)

static inline int ioctl_return(int __user *addr, int value)
{
	return value < 0 ? value : put_user(value, addr);
}


    /*
     *  Configuration
     */

#undef HAS_8BIT_TABLES

#if defined(CONFIG_DMASOUND_ATARI) || defined(CONFIG_DMASOUND_ATARI_MODULE) ||\
    defined(CONFIG_DMASOUND_PAULA) || defined(CONFIG_DMASOUND_PAULA_MODULE) ||\
    defined(CONFIG_DMASOUND_Q40) || defined(CONFIG_DMASOUND_Q40_MODULE)
#define HAS_8BIT_TABLES
#define MIN_BUFFERS	4
#define MIN_BUFSIZE	(1<<12)	/* in bytes (- where does this come from ?) */
#define MIN_FRAG_SIZE	8	/* not 100% sure about this */
#define MAX_BUFSIZE	(1<<17)	/* Limit for Amiga is 128 kb */
#define MAX_FRAG_SIZE	15	/* allow *4 for mono-8 => stereo-16 (for multi) */

#else /* is pmac and multi is off */

#define MIN_BUFFERS	2
#define MIN_BUFSIZE	(1<<8)	/* in bytes */
#define MIN_FRAG_SIZE	8
#define MAX_BUFSIZE	(1<<18)	/* this is somewhat arbitrary for pmac */
#define MAX_FRAG_SIZE	16	/* need to allow *4 for mono-8 => stereo-16 */
#endif

#define DEFAULT_N_BUFFERS 4
#define DEFAULT_BUFF_SIZE (1<<15)

    /*
     *  Initialization
     */

extern int dmasound_init(void);
#ifdef MODULE
extern void dmasound_deinit(void);
#else
#define dmasound_deinit()	do { } while (0)
#endif

/* description of the set-up applies to either hard or soft settings */

typedef struct {
    int format;		/* AFMT_* */
    int stereo;		/* 0 = mono, 1 = stereo */
    int size;		/* 8/16 bit*/
    int speed;		/* speed */
} SETTINGS;

    /*
     *  Machine definitions
     */

typedef struct {
    const char *name;
    const char *name2;
    struct module *owner;
    void *(*dma_alloc)(unsigned int, gfp_t);
    void (*dma_free)(void *, unsigned int);
    int (*irqinit)(void);
#ifdef MODULE
    void (*irqcleanup)(void);
#endif
    void (*init)(void);
    void (*silence)(void);
    int (*setFormat)(int);
    int (*setVolume)(int);
    int (*setBass)(int);
    int (*setTreble)(int);
    int (*setGain)(int);
    void (*play)(void);
    void (*record)(void);		/* optional */
    void (*mixer_init)(void);		/* optional */
    int (*mixer_ioctl)(u_int, u_long);	/* optional */
    int (*write_sq_setup)(void);	/* optional */
    int (*read_sq_setup)(void);		/* optional */
    int (*sq_open)(fmode_t);		/* optional */
    int (*state_info)(char *, size_t);	/* optional */
    void (*abort_read)(void);		/* optional */
    int min_dsp_speed;
    int max_dsp_speed;
    int version ;
    int hardware_afmts ;		/* OSS says we only return h'ware info */
					/* when queried via SNDCTL_DSP_GETFMTS */
    int capabilities ;		/* low-level reply to SNDCTL_DSP_GETCAPS */
    SETTINGS default_hard ;	/* open() or init() should set something valid */
    SETTINGS default_soft ;	/* you can make it look like old OSS, if you want to */
} MACHINE;

    /*
     *  Low level stuff
     */

typedef struct {
    ssize_t (*ct_ulaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
    ssize_t (*ct_alaw)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
    ssize_t (*ct_s8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
    ssize_t (*ct_u8)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
    ssize_t (*ct_s16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
    ssize_t (*ct_u16be)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
    ssize_t (*ct_s16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
    ssize_t (*ct_u16le)(const u_char __user *, size_t, u_char *, ssize_t *, ssize_t);
} TRANS;

struct sound_settings {
    MACHINE mach;	/* machine dependent things */
    SETTINGS hard;	/* hardware settings */
    SETTINGS soft;	/* software settings */
    SETTINGS dsp;	/* /dev/dsp default settings */
    TRANS *trans_write;	/* supported translations */
    int volume_left;	/* volume (range is machine dependent) */
    int volume_right;
    int bass;		/* tone (range is machine dependent) */
    int treble;
    int gain;
    int minDev;		/* minor device number currently open */
    spinlock_t lock;
};

extern struct sound_settings dmasound;

#ifdef HAS_8BIT_TABLES
extern char dmasound_ulaw2dma8[];
extern char dmasound_alaw2dma8[];
#endif

    /*
     *  Mid level stuff
     */

static inline int dmasound_set_volume(int volume)
{
	return dmasound.mach.setVolume(volume);
}

static inline int dmasound_set_bass(int bass)
{
	return dmasound.mach.setBass ? dmasound.mach.setBass(bass) : 50;
}

static inline int dmasound_set_treble(int treble)
{
	return dmasound.mach.setTreble ? dmasound.mach.setTreble(treble) : 50;
}

static inline int dmasound_set_gain(int gain)
{
	return dmasound.mach.setGain ? dmasound.mach.setGain(gain) : 100;
}


    /*
     * Sound queue stuff, the heart of the driver
     */

struct sound_queue {
    /* buffers allocated for this queue */
    int numBufs;		/* real limits on what the user can have */
    int bufSize;		/* in bytes */
    char **buffers;

    /* current parameters */
    int locked ;		/* params cannot be modified when != 0 */
    int user_frags ;		/* user requests this many */
    int user_frag_size ;	/* of this size */
    int max_count;		/* actual # fragments <= numBufs */
    int block_size;		/* internal block size in bytes */
    int max_active;		/* in-use fragments <= max_count */

    /* it shouldn't be necessary to declare any of these volatile */
    int front, rear, count;
    int rear_size;
    /*
     *	The use of the playing field depends on the hardware
     *
     *	Atari, PMac: The number of frames that are loaded/playing
     *
     *	Amiga: Bit 0 is set: a frame is loaded
     *	       Bit 1 is set: a frame is playing
     */
    int active;
    wait_queue_head_t action_queue, open_queue, sync_queue;
    int non_blocking;
    int busy, syncing, xruns, died;
};

#define SLEEP(queue)		interruptible_sleep_on_timeout(&queue, HZ)
#define WAKE_UP(queue)		(wake_up_interruptible(&queue))

extern struct sound_queue dmasound_write_sq;
#define write_sq	dmasound_write_sq

extern int dmasound_catchRadius;
#define catchRadius	dmasound_catchRadius

/* define the value to be put in the byte-swap reg in mac-io
   when we want it to swap for us.
*/
#define BS_VAL 1

#define SW_INPUT_VOLUME_SCALE	4
#define SW_INPUT_VOLUME_DEFAULT	(128 / SW_INPUT_VOLUME_SCALE)

extern int expand_read_bal;	/* Balance factor for reading */
extern uint software_input_volume; /* software implemented recording volume! */

#endif /* _dmasound_h_ */
Commit	Line	Data
1da177e4 LT	1	#ifndef _dmasound_h_
	2	/*
	3	* linux/sound/oss/dmasound/dmasound.h
	4	*
	5	*
	6	* Minor numbers for the sound driver.
	7	*
	8	* Unfortunately Creative called the codec chip of SB as a DSP. For this
	9	* reason the /dev/dsp is reserved for digitized audio use. There is a
	10	* device for true DSP processors but it will be called something else.
	11	* In v3.0 it's /dev/sndproc but this could be a temporary solution.
	12	*/
	13	#define _dmasound_h_
	14
	15	#include <linux/types.h>
1da177e4 LT	16
	17	#define SND_NDEVS 256 /* Number of supported devices */
	18	#define SND_DEV_CTL 0 /* Control port /dev/mixer */
	19	#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
	20	synthesizer and MIDI output) */
	21	#define SND_DEV_MIDIN 2 /* Raw midi access */
	22	#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
	23	#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
	24	#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
	25	#define SND_DEV_STATUS 6 /* /dev/sndstat */
	26	/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
	27	#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */
	28	#define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */
	29	#define SND_DEV_PSS SND_DEV_SNDPROC
	30
	31	/* switch on various prinks */
	32	#define DEBUG_DMASOUND 1
	33
	34	#define MAX_AUDIO_DEV 5
	35	#define MAX_MIXER_DEV 4
	36	#define MAX_SYNTH_DEV 3
	37	#define MAX_MIDI_DEV 6
	38	#define MAX_TIMER_DEV 3
	39
	40	#define MAX_CATCH_RADIUS 10
	41
	42	#define le2be16(x) (((x)<<8 & 0xff00) \| ((x)>>8 & 0x00ff))
	43	#define le2be16dbl(x) (((x)<<8 & 0xff00ff00) \| ((x)>>8 & 0x00ff00ff))
	44
	45	#define IOCTL_IN(arg, ret) \
	46	do { int error = get_user(ret, (int __user *)(arg)); \
	47	if (error) return error; \
	48	} while (0)
	49	#define IOCTL_OUT(arg, ret) ioctl_return((int __user *)(arg), ret)
	50
	51	static inline int ioctl_return(int __user *addr, int value)
	52	{
	53	return value < 0 ? value : put_user(value, addr);
	54	}
	55
	56
	57	/*
	58	* Configuration
	59	*/
	60
	61	#undef HAS_8BIT_TABLES
1da177e4 LT	62
	63	#if defined(CONFIG_DMASOUND_ATARI) \|\| defined(CONFIG_DMASOUND_ATARI_MODULE) \|\|\
	64	defined(CONFIG_DMASOUND_PAULA) \|\| defined(CONFIG_DMASOUND_PAULA_MODULE) \|\|\
	65	defined(CONFIG_DMASOUND_Q40) \|\| defined(CONFIG_DMASOUND_Q40_MODULE)
	66	#define HAS_8BIT_TABLES
	67	#define MIN_BUFFERS 4
	68	#define MIN_BUFSIZE (1<<12) /* in bytes (- where does this come from ?) */
	69	#define MIN_FRAG_SIZE 8 /* not 100% sure about this */
	70	#define MAX_BUFSIZE (1<<17) /* Limit for Amiga is 128 kb */
	71	#define MAX_FRAG_SIZE 15 /* allow 4 for mono-8 => stereo-16 (for multi) /
	72
	73	#else /* is pmac and multi is off */
	74
	75	#define MIN_BUFFERS 2
	76	#define MIN_BUFSIZE (1<<8) /* in bytes */
	77	#define MIN_FRAG_SIZE 8
	78	#define MAX_BUFSIZE (1<<18) /* this is somewhat arbitrary for pmac */
	79	#define MAX_FRAG_SIZE 16 /* need to allow 4 for mono-8 => stereo-16 /
	80	#endif
	81
	82	#define DEFAULT_N_BUFFERS 4
	83	#define DEFAULT_BUFF_SIZE (1<<15)
	84
1da177e4 LT	85	/*
	86	* Initialization
	87	*/
	88
	89	extern int dmasound_init(void);
	90	#ifdef MODULE
	91	extern void dmasound_deinit(void);
	92	#else
	93	#define dmasound_deinit() do { } while (0)
	94	#endif
	95
	96	/* description of the set-up applies to either hard or soft settings */
	97
	98	typedef struct {
	99	int format; /* AFMT_* */
	100	int stereo; /* 0 = mono, 1 = stereo */
	101	int size; /* 8/16 bit*/
	102	int speed; /* speed */
	103	} SETTINGS;
	104
	105	/*
	106	* Machine definitions
	107	*/
	108
	109	typedef struct {
	110	const char *name;
	111	const char *name2;
	112	struct module *owner;
1ef64e67	113	void (dma_alloc)(unsigned int, gfp_t);
1da177e4 LT	114	void (dma_free)(void , unsigned int);
	115	int (*irqinit)(void);
	116	#ifdef MODULE
	117	void (*irqcleanup)(void);
	118	#endif
	119	void (*init)(void);
	120	void (*silence)(void);
	121	int (*setFormat)(int);
	122	int (*setVolume)(int);
	123	int (*setBass)(int);
	124	int (*setTreble)(int);
	125	int (*setGain)(int);
	126	void (*play)(void);
	127	void (record)(void); / optional */
	128	void (mixer_init)(void); / optional */
	129	int (mixer_ioctl)(u_int, u_long); / optional */
	130	int (write_sq_setup)(void); / optional */
	131	int (read_sq_setup)(void); / optional */
aeb5d727	132	int (sq_open)(fmode_t); / optional */
1da177e4 LT	133	int (state_info)(char , size_t); /* optional */
	134	void (abort_read)(void); / optional */
	135	int min_dsp_speed;
	136	int max_dsp_speed;
	137	int version ;
	138	int hardware_afmts ; /* OSS says we only return h'ware info */
	139	/* when queried via SNDCTL_DSP_GETFMTS */
	140	int capabilities ; /* low-level reply to SNDCTL_DSP_GETCAPS */
	141	SETTINGS default_hard ; /* open() or init() should set something valid */
	142	SETTINGS default_soft ; /* you can make it look like old OSS, if you want to */
	143	} MACHINE;
	144
	145	/*
	146	* Low level stuff
	147	*/
	148
	149	typedef struct {
	150	ssize_t (ct_ulaw)(const u_char __user , size_t, u_char , ssize_t , ssize_t);
	151	ssize_t (ct_alaw)(const u_char __user , size_t, u_char , ssize_t , ssize_t);
	152	ssize_t (ct_s8)(const u_char __user , size_t, u_char , ssize_t , ssize_t);
	153	ssize_t (ct_u8)(const u_char __user , size_t, u_char , ssize_t , ssize_t);
	154	ssize_t (ct_s16be)(const u_char __user , size_t, u_char , ssize_t , ssize_t);
	155	ssize_t (ct_u16be)(const u_char __user , size_t, u_char , ssize_t , ssize_t);
	156	ssize_t (ct_s16le)(const u_char __user , size_t, u_char , ssize_t , ssize_t);
	157	ssize_t (ct_u16le)(const u_char __user , size_t, u_char , ssize_t , ssize_t);
	158	} TRANS;
	159
	160	struct sound_settings {
	161	MACHINE mach; /* machine dependent things */
	162	SETTINGS hard; /* hardware settings */
	163	SETTINGS soft; /* software settings */
	164	SETTINGS dsp; /* /dev/dsp default settings */
	165	TRANS trans_write; / supported translations */
1da177e4 LT	166	int volume_left; /* volume (range is machine dependent) */
	167	int volume_right;
	168	int bass; /* tone (range is machine dependent) */
	169	int treble;
	170	int gain;
	171	int minDev; /* minor device number currently open */
	172	spinlock_t lock;
	173	};
	174
	175	extern struct sound_settings dmasound;
	176
	177	#ifdef HAS_8BIT_TABLES
	178	extern char dmasound_ulaw2dma8[];
	179	extern char dmasound_alaw2dma8[];
	180	#endif
	181
	182	/*
	183	* Mid level stuff
	184	*/
	185
	186	static inline int dmasound_set_volume(int volume)
	187	{
	188	return dmasound.mach.setVolume(volume);
	189	}
	190
	191	static inline int dmasound_set_bass(int bass)
	192	{
	193	return dmasound.mach.setBass ? dmasound.mach.setBass(bass) : 50;
	194	}
	195
	196	static inline int dmasound_set_treble(int treble)
	197	{
	198	return dmasound.mach.setTreble ? dmasound.mach.setTreble(treble) : 50;
	199	}
	200
	201	static inline int dmasound_set_gain(int gain)
	202	{
	203	return dmasound.mach.setGain ? dmasound.mach.setGain(gain) : 100;
	204	}
	205
	206
	207	/*
	208	* Sound queue stuff, the heart of the driver
	209	*/
	210
	211	struct sound_queue {
	212	/* buffers allocated for this queue */
	213	int numBufs; /* real limits on what the user can have */
	214	int bufSize; /* in bytes */
	215	char **buffers;
	216
	217	/* current parameters */
	218	int locked ; /* params cannot be modified when != 0 */
	219	int user_frags ; /* user requests this many */
	220	int user_frag_size ; /* of this size */
	221	int max_count; /* actual # fragments <= numBufs */
	222	int block_size; /* internal block size in bytes */
	223	int max_active; /* in-use fragments <= max_count */
	224
	225	/* it shouldn't be necessary to declare any of these volatile */
	226	int front, rear, count;
	227	int rear_size;
	228	/*
	229	* The use of the playing field depends on the hardware
230	*
231	* Atari, PMac: The number of frames that are loaded/playing
232	*
233	* Amiga: Bit 0 is set: a frame is loaded
234	* Bit 1 is set: a frame is playing
235	*/
236	int active;
237	wait_queue_head_t action_queue, open_queue, sync_queue;
4b30fbde	238	int non_blocking;
1da177e4 LT	239	int busy, syncing, xruns, died;
	240	};
	241
	242	#define SLEEP(queue) interruptible_sleep_on_timeout(&queue, HZ)
	243	#define WAKE_UP(queue) (wake_up_interruptible(&queue))
	244
	245	extern struct sound_queue dmasound_write_sq;
	246	#define write_sq dmasound_write_sq
	247
1da177e4 LT	248	extern int dmasound_catchRadius;
	249	#define catchRadius dmasound_catchRadius
	250
	251	/* define the value to be put in the byte-swap reg in mac-io
	252	when we want it to swap for us.
	253	*/
	254	#define BS_VAL 1
	255
	256	#define SW_INPUT_VOLUME_SCALE 4
	257	#define SW_INPUT_VOLUME_DEFAULT (128 / SW_INPUT_VOLUME_SCALE)
	258
1da177e4 LT	259	extern int expand_read_bal; /* Balance factor for reading */
	260	extern uint software_input_volume; /* software implemented recording volume! */
	261
	262	#endif /* _dmasound_h_ */