[GitHub/LineageOS/android_kernel_samsung_universal7580.git] / include / net / ieee80211_radiotap.h

/* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */
/* $NetBSD: ieee80211_radiotap.h,v 1.11 2005/06/22 06:16:02 dyoung Exp $ */

/*-
 * Copyright (c) 2003, 2004 David Young.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of David Young may not be used to endorse or promote
 *    products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL DAVID
 * YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
 * OF SUCH DAMAGE.
 */

/*
 * Modifications to fit into the linux IEEE 802.11 stack,
 * Mike Kershaw (dragorn@kismetwireless.net)
 */

#ifndef IEEE80211RADIOTAP_H
#define IEEE80211RADIOTAP_H

#include <linux/if_ether.h>
#include <linux/kernel.h>

/* Radiotap header version (from official NetBSD feed) */
#define IEEE80211RADIOTAP_VERSION	"1.5"
/* Base version of the radiotap packet header data */
#define PKTHDR_RADIOTAP_VERSION		0

/* A generic radio capture format is desirable. There is one for
 * Linux, but it is neither rigidly defined (there were not even
 * units given for some fields) nor easily extensible.
 *
 * I suggest the following extensible radio capture format. It is
 * based on a bitmap indicating which fields are present.
 *
 * I am trying to describe precisely what the application programmer
 * should expect in the following, and for that reason I tell the
 * units and origin of each measurement (where it applies), or else I
 * use sufficiently weaselly language ("is a monotonically nondecreasing
 * function of...") that I cannot set false expectations for lawyerly
 * readers.
 */

/* XXX tcpdump/libpcap do not tolerate variable-length headers,
 * yet, so we pad every radiotap header to 64 bytes. Ugh.
 */
#define IEEE80211_RADIOTAP_HDRLEN	64

/* The radio capture header precedes the 802.11 header.
 * All data in the header is little endian on all platforms.
 */
struct ieee80211_radiotap_header {
	u8 it_version;		/* Version 0. Only increases
				 * for drastic changes,
				 * introduction of compatible
				 * new fields does not count.
				 */
	u8 it_pad;
	__le16 it_len;		/* length of the whole
				 * header in bytes, including
				 * it_version, it_pad,
				 * it_len, and data fields.
				 */
	__le32 it_present;	/* A bitmap telling which
				 * fields are present. Set bit 31
				 * (0x80000000) to extend the
				 * bitmap by another 32 bits.
				 * Additional extensions are made
				 * by setting bit 31.
				 */
};

/* Name                                 Data type    Units
 * ----                                 ---------    -----
 *
 * IEEE80211_RADIOTAP_TSFT              __le64       microseconds
 *
 *      Value in microseconds of the MAC's 64-bit 802.11 Time
 *      Synchronization Function timer when the first bit of the
 *      MPDU arrived at the MAC. For received frames, only.
 *
 * IEEE80211_RADIOTAP_CHANNEL           2 x __le16   MHz, bitmap
 *
 *      Tx/Rx frequency in MHz, followed by flags (see below).
 *
 * IEEE80211_RADIOTAP_FHSS              __le16       see below
 *
 *      For frequency-hopping radios, the hop set (first byte)
 *      and pattern (second byte).
 *
 * IEEE80211_RADIOTAP_RATE              u8           500kb/s
 *
 *      Tx/Rx data rate
 *
 * IEEE80211_RADIOTAP_DBM_ANTSIGNAL     s8           decibels from
 *                                                   one milliwatt (dBm)
 *
 *      RF signal power at the antenna, decibel difference from
 *      one milliwatt.
 *
 * IEEE80211_RADIOTAP_DBM_ANTNOISE      s8           decibels from
 *                                                   one milliwatt (dBm)
 *
 *      RF noise power at the antenna, decibel difference from one
 *      milliwatt.
 *
 * IEEE80211_RADIOTAP_DB_ANTSIGNAL      u8           decibel (dB)
 *
 *      RF signal power at the antenna, decibel difference from an
 *      arbitrary, fixed reference.
 *
 * IEEE80211_RADIOTAP_DB_ANTNOISE       u8           decibel (dB)
 *
 *      RF noise power at the antenna, decibel difference from an
 *      arbitrary, fixed reference point.
 *
 * IEEE80211_RADIOTAP_LOCK_QUALITY      __le16       unitless
 *
 *      Quality of Barker code lock. Unitless. Monotonically
 *      nondecreasing with "better" lock strength. Called "Signal
 *      Quality" in datasheets.  (Is there a standard way to measure
 *      this?)
 *
 * IEEE80211_RADIOTAP_TX_ATTENUATION    __le16       unitless
 *
 *      Transmit power expressed as unitless distance from max
 *      power set at factory calibration.  0 is max power.
 *      Monotonically nondecreasing with lower power levels.
 *
 * IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16       decibels (dB)
 *
 *      Transmit power expressed as decibel distance from max power
 *      set at factory calibration.  0 is max power.  Monotonically
 *      nondecreasing with lower power levels.
 *
 * IEEE80211_RADIOTAP_DBM_TX_POWER      s8           decibels from
 *                                                   one milliwatt (dBm)
 *
 *      Transmit power expressed as dBm (decibels from a 1 milliwatt
 *      reference). This is the absolute power level measured at
 *      the antenna port.
 *
 * IEEE80211_RADIOTAP_FLAGS             u8           bitmap
 *
 *      Properties of transmitted and received frames. See flags
 *      defined below.
 *
 * IEEE80211_RADIOTAP_ANTENNA           u8           antenna index
 *
 *      Unitless indication of the Rx/Tx antenna for this packet.
 *      The first antenna is antenna 0.
 *
 * IEEE80211_RADIOTAP_RX_FLAGS          __le16       bitmap
 *
 *     Properties of received frames. See flags defined below.
 *
 * IEEE80211_RADIOTAP_TX_FLAGS          __le16       bitmap
 *
 *     Properties of transmitted frames. See flags defined below.
 *
 * IEEE80211_RADIOTAP_RTS_RETRIES       u8           data
 *
 *     Number of rts retries a transmitted frame used.
 *
 * IEEE80211_RADIOTAP_DATA_RETRIES      u8           data
 *
 *     Number of unicast retries a transmitted frame used.
 *
 */
enum ieee80211_radiotap_type {
	IEEE80211_RADIOTAP_TSFT = 0,
	IEEE80211_RADIOTAP_FLAGS = 1,
	IEEE80211_RADIOTAP_RATE = 2,
	IEEE80211_RADIOTAP_CHANNEL = 3,
	IEEE80211_RADIOTAP_FHSS = 4,
	IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
	IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
	IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
	IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
	IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
	IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
	IEEE80211_RADIOTAP_ANTENNA = 11,
	IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
	IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
	IEEE80211_RADIOTAP_RX_FLAGS = 14,
	IEEE80211_RADIOTAP_TX_FLAGS = 15,
	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
	IEEE80211_RADIOTAP_EXT = 31
};

/* Channel flags. */
#define	IEEE80211_CHAN_TURBO	0x0010	/* Turbo channel */
#define	IEEE80211_CHAN_CCK	0x0020	/* CCK channel */
#define	IEEE80211_CHAN_OFDM	0x0040	/* OFDM channel */
#define	IEEE80211_CHAN_2GHZ	0x0080	/* 2 GHz spectrum channel. */
#define	IEEE80211_CHAN_5GHZ	0x0100	/* 5 GHz spectrum channel */
#define	IEEE80211_CHAN_PASSIVE	0x0200	/* Only passive scan allowed */
#define	IEEE80211_CHAN_DYN	0x0400	/* Dynamic CCK-OFDM channel */
#define	IEEE80211_CHAN_GFSK	0x0800	/* GFSK channel (FHSS PHY) */

/* For IEEE80211_RADIOTAP_FLAGS */
#define	IEEE80211_RADIOTAP_F_CFP	0x01	/* sent/received
						 * during CFP
						 */
#define	IEEE80211_RADIOTAP_F_SHORTPRE	0x02	/* sent/received
						 * with short
						 * preamble
						 */
#define	IEEE80211_RADIOTAP_F_WEP	0x04	/* sent/received
						 * with WEP encryption
						 */
#define	IEEE80211_RADIOTAP_F_FRAG	0x08	/* sent/received
						 * with fragmentation
						 */
#define	IEEE80211_RADIOTAP_F_FCS	0x10	/* frame includes FCS */
#define	IEEE80211_RADIOTAP_F_DATAPAD	0x20	/* frame has padding between
						 * 802.11 header and payload
						 * (to 32-bit boundary)
						 */
/* For IEEE80211_RADIOTAP_RX_FLAGS */
#define IEEE80211_RADIOTAP_F_RX_BADFCS	0x0001	/* frame failed crc check */

/* For IEEE80211_RADIOTAP_TX_FLAGS */
#define IEEE80211_RADIOTAP_F_TX_FAIL	0x0001	/* failed due to excessive
						 * retries */
#define IEEE80211_RADIOTAP_F_TX_CTS	0x0002	/* used cts 'protection' */
#define IEEE80211_RADIOTAP_F_TX_RTS	0x0004	/* used rts/cts handshake */

/* Ugly macro to convert literal channel numbers into their mhz equivalents
 * There are certianly some conditions that will break this (like feeding it '30')
 * but they shouldn't arise since nothing talks on channel 30. */
#define ieee80211chan2mhz(x) \
	(((x) <= 14) ? \
	(((x) == 14) ? 2484 : ((x) * 5) + 2407) : \
	((x) + 1000) * 5)

/* helpers */
static inline int ieee80211_get_radiotap_len(unsigned char *data)
{
	struct ieee80211_radiotap_header *hdr =
		(struct ieee80211_radiotap_header *)data;

	return le16_to_cpu(hdr->it_len);
}

#endif				/* IEEE80211_RADIOTAP_H */
Commit	Line	Data
3905ec45 JK	1	/* $FreeBSD: src/sys/net80211/ieee80211_radiotap.h,v 1.5 2005/01/22 20:12:05 sam Exp $ */
	2	/* $NetBSD: ieee80211_radiotap.h,v 1.11 2005/06/22 06:16:02 dyoung Exp $ */
	3
	4	/*-
	5	* Copyright (c) 2003, 2004 David Young. All rights reserved.
	6	*
	7	* Redistribution and use in source and binary forms, with or without
	8	* modification, are permitted provided that the following conditions
	9	* are met:
	10	* 1. Redistributions of source code must retain the above copyright
	11	* notice, this list of conditions and the following disclaimer.
	12	* 2. Redistributions in binary form must reproduce the above copyright
	13	* notice, this list of conditions and the following disclaimer in the
	14	* documentation and/or other materials provided with the distribution.
	15	* 3. The name of David Young may not be used to endorse or promote
	16	* products derived from this software without specific prior
	17	* written permission.
	18	*
	19	* THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
	20	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
	21	* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
	22	* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID
	23	* YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
	24	* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
	25	* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	26	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	27	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
	28	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
	29	* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
	30	* OF SUCH DAMAGE.
	31	*/
	32
	33	/*
	34	* Modifications to fit into the linux IEEE 802.11 stack,
	35	* Mike Kershaw (dragorn@kismetwireless.net)
	36	*/
	37
	38	#ifndef IEEE80211RADIOTAP_H
	39	#define IEEE80211RADIOTAP_H
	40
	41	#include <linux/if_ether.h>
	42	#include <linux/kernel.h>
	43
	44	/* Radiotap header version (from official NetBSD feed) */
	45	#define IEEE80211RADIOTAP_VERSION "1.5"
	46	/* Base version of the radiotap packet header data */
	47	#define PKTHDR_RADIOTAP_VERSION 0
	48
	49	/* A generic radio capture format is desirable. There is one for
	50	* Linux, but it is neither rigidly defined (there were not even
	51	* units given for some fields) nor easily extensible.
	52	*
	53	* I suggest the following extensible radio capture format. It is
	54	* based on a bitmap indicating which fields are present.
	55	*
	56	* I am trying to describe precisely what the application programmer
	57	* should expect in the following, and for that reason I tell the
	58	* units and origin of each measurement (where it applies), or else I
	59	* use sufficiently weaselly language ("is a monotonically nondecreasing
	60	* function of...") that I cannot set false expectations for lawyerly
	61	* readers.
	62	*/
	63
	64	/* XXX tcpdump/libpcap do not tolerate variable-length headers,
65	* yet, so we pad every radiotap header to 64 bytes. Ugh.
66	*/
67	#define IEEE80211_RADIOTAP_HDRLEN 64
68
a0d69f22 PR	69	/* The radio capture header precedes the 802.11 header.
	70	* All data in the header is little endian on all platforms.
	71	*/
3905ec45 JK	72	struct ieee80211_radiotap_header {
	73	u8 it_version; /* Version 0. Only increases
	74	* for drastic changes,
	75	* introduction of compatible
	76	* new fields does not count.
	77	*/
	78	u8 it_pad;
a0d69f22	79	__le16 it_len; /* length of the whole
3905ec45 JK	80	* header in bytes, including
	81	* it_version, it_pad,
	82	* it_len, and data fields.
	83	*/
a0d69f22	84	__le32 it_present; /* A bitmap telling which
3905ec45 JK	85	* fields are present. Set bit 31
	86	* (0x80000000) to extend the
	87	* bitmap by another 32 bits.
	88	* Additional extensions are made
	89	* by setting bit 31.
	90	*/
	91	};
	92
a0d69f22 PR	93	/* Name Data type Units
a0d69f22 PR	94	* ---- --------- -----
3905ec45	95	*
a0d69f22	96	* IEEE80211_RADIOTAP_TSFT __le64 microseconds
3905ec45 JK	97	*
	98	* Value in microseconds of the MAC's 64-bit 802.11 Time
	99	* Synchronization Function timer when the first bit of the
	100	* MPDU arrived at the MAC. For received frames, only.
	101	*
a0d69f22	102	* IEEE80211_RADIOTAP_CHANNEL 2 x __le16 MHz, bitmap
3905ec45 JK	103	*
	104	* Tx/Rx frequency in MHz, followed by flags (see below).
	105	*
a0d69f22	106	* IEEE80211_RADIOTAP_FHSS __le16 see below
3905ec45 JK	107	*
	108	* For frequency-hopping radios, the hop set (first byte)
	109	* and pattern (second byte).
	110	*
a0d69f22	111	* IEEE80211_RADIOTAP_RATE u8 500kb/s
3905ec45 JK	112	*
	113	* Tx/Rx data rate
	114	*
a0d69f22 PR	115	* IEEE80211_RADIOTAP_DBM_ANTSIGNAL s8 decibels from
a0d69f22 PR	116	* one milliwatt (dBm)
3905ec45 JK	117	*
	118	* RF signal power at the antenna, decibel difference from
	119	* one milliwatt.
	120	*
a0d69f22 PR	121	* IEEE80211_RADIOTAP_DBM_ANTNOISE s8 decibels from
a0d69f22 PR	122	* one milliwatt (dBm)
3905ec45 JK	123	*
	124	* RF noise power at the antenna, decibel difference from one
	125	* milliwatt.
	126	*
a0d69f22	127	* IEEE80211_RADIOTAP_DB_ANTSIGNAL u8 decibel (dB)
3905ec45 JK	128	*
	129	* RF signal power at the antenna, decibel difference from an
	130	* arbitrary, fixed reference.
	131	*
a0d69f22	132	* IEEE80211_RADIOTAP_DB_ANTNOISE u8 decibel (dB)
3905ec45 JK	133	*
	134	* RF noise power at the antenna, decibel difference from an
	135	* arbitrary, fixed reference point.
	136	*
a0d69f22	137	* IEEE80211_RADIOTAP_LOCK_QUALITY __le16 unitless
3905ec45 JK	138	*
	139	* Quality of Barker code lock. Unitless. Monotonically
	140	* nondecreasing with "better" lock strength. Called "Signal
	141	* Quality" in datasheets. (Is there a standard way to measure
	142	* this?)
	143	*
a0d69f22	144	* IEEE80211_RADIOTAP_TX_ATTENUATION __le16 unitless
3905ec45 JK	145	*
	146	* Transmit power expressed as unitless distance from max
	147	* power set at factory calibration. 0 is max power.
	148	* Monotonically nondecreasing with lower power levels.
	149	*
a0d69f22	150	* IEEE80211_RADIOTAP_DB_TX_ATTENUATION __le16 decibels (dB)
3905ec45 JK	151	*
	152	* Transmit power expressed as decibel distance from max power
	153	* set at factory calibration. 0 is max power. Monotonically
	154	* nondecreasing with lower power levels.
	155	*
a0d69f22 PR	156	* IEEE80211_RADIOTAP_DBM_TX_POWER s8 decibels from
a0d69f22 PR	157	* one milliwatt (dBm)
3905ec45 JK	158	*
	159	* Transmit power expressed as dBm (decibels from a 1 milliwatt
	160	* reference). This is the absolute power level measured at
	161	* the antenna port.
	162	*
a0d69f22	163	* IEEE80211_RADIOTAP_FLAGS u8 bitmap
3905ec45 JK	164	*
	165	* Properties of transmitted and received frames. See flags
	166	* defined below.
	167	*
a0d69f22	168	* IEEE80211_RADIOTAP_ANTENNA u8 antenna index
3905ec45 JK	169	*
	170	* Unitless indication of the Rx/Tx antenna for this packet.
	171	* The first antenna is antenna 0.
	172	*
a0d69f22	173	* IEEE80211_RADIOTAP_RX_FLAGS __le16 bitmap
876c9d3a MT	174	*
	175	* Properties of received frames. See flags defined below.
	176	*
a0d69f22	177	* IEEE80211_RADIOTAP_TX_FLAGS __le16 bitmap
876c9d3a MT	178	*
	179	* Properties of transmitted frames. See flags defined below.
	180	*
a0d69f22	181	* IEEE80211_RADIOTAP_RTS_RETRIES u8 data
876c9d3a MT	182	*
	183	* Number of rts retries a transmitted frame used.
	184	*
a0d69f22	185	* IEEE80211_RADIOTAP_DATA_RETRIES u8 data
876c9d3a MT	186	*
	187	* Number of unicast retries a transmitted frame used.
	188	*
3905ec45 JK	189	*/
	190	enum ieee80211_radiotap_type {
	191	IEEE80211_RADIOTAP_TSFT = 0,
	192	IEEE80211_RADIOTAP_FLAGS = 1,
	193	IEEE80211_RADIOTAP_RATE = 2,
	194	IEEE80211_RADIOTAP_CHANNEL = 3,
	195	IEEE80211_RADIOTAP_FHSS = 4,
	196	IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
	197	IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
	198	IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
	199	IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
	200	IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
	201	IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
	202	IEEE80211_RADIOTAP_ANTENNA = 11,
	203	IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
	204	IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
876c9d3a MT	205	IEEE80211_RADIOTAP_RX_FLAGS = 14,
	206	IEEE80211_RADIOTAP_TX_FLAGS = 15,
	207	IEEE80211_RADIOTAP_RTS_RETRIES = 16,
	208	IEEE80211_RADIOTAP_DATA_RETRIES = 17,
	209	IEEE80211_RADIOTAP_EXT = 31
3905ec45 JK	210	};
	211
	212	/* Channel flags. */
	213	#define IEEE80211_CHAN_TURBO 0x0010 /* Turbo channel */
	214	#define IEEE80211_CHAN_CCK 0x0020 /* CCK channel */
	215	#define IEEE80211_CHAN_OFDM 0x0040 /* OFDM channel */
	216	#define IEEE80211_CHAN_2GHZ 0x0080 /* 2 GHz spectrum channel. */
	217	#define IEEE80211_CHAN_5GHZ 0x0100 /* 5 GHz spectrum channel */
	218	#define IEEE80211_CHAN_PASSIVE 0x0200 /* Only passive scan allowed */
	219	#define IEEE80211_CHAN_DYN 0x0400 /* Dynamic CCK-OFDM channel */
	220	#define IEEE80211_CHAN_GFSK 0x0800 /* GFSK channel (FHSS PHY) */
	221
	222	/* For IEEE80211_RADIOTAP_FLAGS */
	223	#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received
	224	* during CFP
	225	*/
	226	#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received
	227	* with short
	228	* preamble
	229	*/
	230	#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received
	231	* with WEP encryption
	232	*/
	233	#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received
	234	* with fragmentation
	235	*/
	236	#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */
	237	#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between
	238	* 802.11 header and payload
	239	* (to 32-bit boundary)
	240	*/
876c9d3a MT	241	/* For IEEE80211_RADIOTAP_RX_FLAGS */
	242	#define IEEE80211_RADIOTAP_F_RX_BADFCS 0x0001 /* frame failed crc check */
	243
	244	/* For IEEE80211_RADIOTAP_TX_FLAGS */
	245	#define IEEE80211_RADIOTAP_F_TX_FAIL 0x0001 /* failed due to excessive
	246	* retries */
	247	#define IEEE80211_RADIOTAP_F_TX_CTS 0x0002 /* used cts 'protection' */
	248	#define IEEE80211_RADIOTAP_F_TX_RTS 0x0004 /* used rts/cts handshake */
3905ec45 JK	249
	250	/* Ugly macro to convert literal channel numbers into their mhz equivalents
	251	* There are certianly some conditions that will break this (like feeding it '30')
	252	* but they shouldn't arise since nothing talks on channel 30. */
	253	#define ieee80211chan2mhz(x) \
	254	(((x) <= 14) ? \
	255	(((x) == 14) ? 2484 : ((x) * 5) + 2407) : \
	256	((x) + 1000) * 5)
	257
571ecf67 JB	258	/* helpers */
	259	static inline int ieee80211_get_radiotap_len(unsigned char *data)
	260	{
	261	struct ieee80211_radiotap_header *hdr =
	262	(struct ieee80211_radiotap_header *)data;
	263
	264	return le16_to_cpu(hdr->it_len);
	265	}
	266
3905ec45	267	#endif /* IEEE80211_RADIOTAP_H */